Search

The development of electric gerotor pumps is a complex multiphysical optimization problem. To develop optimal systems, accurate simulation models are required to increase digital reliability. An important challenge is the accurate prediction of the pump behavior for extreme temperatures in automotive applications from −40 °C to 110 °C, where the viscosity of the fluid changes significantly. Therefore, simulation-based methods (numerical methods for calculating viscous friction) were developed and validated by measurements, including climatic chamber tests. The results show a strong correlation between simulated and measured performance characteristics, especially in terms of volumetric flow rate (<5%), pump torque and efficiency (<7%) at different temperature and viscosity conditions over a wide speed range (1000–5000 rpm) and different system pressures (0.5–5 bar). A novel method for simulating the cold start behavior of pumps (journal bearing approach for outer gear in pump housing) was introduced and validated by measurements. The methods presented significantly reduce the need for physical testing and accelerate the development process, as the pump behavior at each operating point can be accurately predicted before a hardware prototype is built. This improves the understanding of gerotor pump characteristics and provides insights to further improve the model-based development of electric oil pumps for the automotive industry.

Today, design engineers engaged in the development of a high-performance electrical drive-train are challenged by the multitude of possible topological choices and numerous mutually interconnected physical phenomena. Development teams around the globe struggle with this challenge; usually they employ several tools for simulation and topology optimization and transfer multiple versions of their product models in a mainly manual process. The research presented in this paper aims to explore a holistic possibility to realize a sensible analysis-synthesis cycle that takes into consideration current developments in design, simulation and optimization processes. This kind of process can enhance the transparency of design decisions, can reduce the risk of design and process flaws and can support the approach toward a holistic optimum. The investigation starts with the development of the topological concept of the drive-train and continues over the interconnected simulation of several decisive properties of the drive-train. Obviously, these properties concern several domains (mechanical, electrical, thermal and the control domain). The optimization of the drive-train takes into consideration the main requirement—in the investigated example, which is a formula student drive-train—the lap time. The result is a holistic concept for a design, simulation and optimization approach that considers topological variety, interconnected multi-domain simulation and a continuous connection to the decisive requirements.

Graph-based design languages have received increasing attention in the research community, because they offer a promising approach to address several major issues in engineering, e.g., the frequent manual data transfer between computer-aided design (CAD) and computer-aided engineering (CAE) systems. Currently, these issues prevent the realization of machine executable digital design processes of complex systems such as vehicles. Promising scenarios for urban transportation include an interconnection of mass transportation systems such as buses and subways with individual vehicles for the so-called “last mile” transport. For several reasons, these vehicles should be as small and light as possible. A considerable reduction in weight and size can be achieved, if such vehicles are tailored to the individual size, weight and proportion of the individual user. However, tailoring vehicles for the individual characteristics of each user go beyond a simple building set and require a continuous digital design process. Consequently, the topic of this paper is a digital design process of a self-balanced scooter, which can be used as an individual last-mile means of transport. This process is based on graph-based design languages, because in these languages, a digital system model is generated, which contains all relevant information about a design and can be fed into any simulation tool which is needed to evaluate the impact of a possible design variation on the resulting product performance. As this process can be automated by digital compilers, it is possible to perform systematic design variations for an almost infinite amount of parameters and topological variants. Consequently, these kinds of graph-based languages are a powerful means to generate viable design alternatives and thus permit fast evaluations. The paper demonstrates the design process, focusing on the drive system of the respective balanced two-wheel scooter and highlights the advantages (data integration and possibility for machine execution).

The main focus of this paper is the integration of an integrated function modeling (IFM) framework in an engineering framework based on graph-based design languages (GBDLs). Over the last decade, GBDLs have received increasing attention as they offer a promising approach for addressing several important challenges in engineering, such as the frequent and time-consuming transfer of data between different computer aided engineering (CAE) tools. This absorbs significant amounts of manual labor in engineering design projects. GBDLs create digital system models at a meta level, encompassing all relevant information concerning a certain product design and feeding this into the relevant simulation tools needed for evaluating the impact of possible design variations on the performance of the resulting products/parts. It is possible to automate this process using digital compilers. Because of this, it is also possible to realize systematic design variations for a very large number of parameters and topological variants. Therefore, these kinds of graph-based languages are a powerful means for creating a large number of viable design alternatives and for permitting fast evaluation processes against the given specifications. While, thus far, such analyses tend to be based on a more or less fully defined system, this paper proposes an expansion of the applicability of GBDLs into the domain of product functions to cohesively link conceptual with embodiment design stages. This will also help with early systematic, automated generation and the validation of design alternatives through relevant simulation tools during embodiment design. Further, it will permit the automated exploration of function paths and enable extended analysis possibilities, such as the detection of functional bottlenecks, while enhancing the traceability of the design over the development process. For these extended analysis possibilities, a function analysis tool was developed that adopts core ideas of the failure mode and effects analysis (FMEA). In this, the functional distinction between function carriers and function-related processes allows the goal-directed assessment of component reliabilities and the detectability and importance of processes in a technical system. In the paper, the graph-based modeling of functions and the function analysis tools are demonstrated on the example of a multicopter.

For several decades, a wide-spread consensus concerning the enormous importance of an in-depth clarification of the specifications of a product has been observed. A weak clarification of specifications is repeatedly listed as a main cause for the failure of product development projects. Requirements, which can be defined as the purpose, goals, constraints, and criteria associated with a product development project, play a central role in the clarification of specifications. The collection of activities which ensure that requirements are identified, documented, maintained, communicated, and traced throughout the life cycle of a system, product, or service can be referred to as “requirements engineering”. These activities can be supported by a collection and combination of strategies, methods, and tools which are appropriate for the clarification of specifications. Numerous publications describe the strategy and the components of requirements management. Furthermore, recent research investigates its industrial application. Simultaneously, promising developments of graph-based design languages for a holistic digital representation of the product life cycle are presented. Current developments realize graph-based languages by the diagrams of the Unified Modelling Language (UML), and allow the automatic generation and evaluation of multiple product variants. The research presented in this paper seeks to present a method in order to combine the advantages of a conscious requirements management process and graph-based design languages. Consequently, the main objective of this paper is the investigation of a model-based integration of requirements in a product development process by means of graph-based design languages. The research method is based on an in-depth analysis of an exemplary industrial product development, a gear system for so-called “Electrical Multiple Units” (EMU). Important requirements were abstracted from a gear system specification list and were analyzed in detail. As a second basis, the research method uses a conscious expansion of graph-based design languages towards their applicability for requirements management. This expansion allows the handling of requirements through a graph-based design language model. The first two results of the presented research consist of a model of the gear system and a detailed model of requirements, both modelled in a graph-based design language. Further results are generated by a combination of the two models into one holistic model.

Marine aquaculture has grown enormously in recent decades, and with it the competition for space suitable for aquaculture. These developments have limited the areas available for aquaculture and, in some cases, have become a barrier to expansion. In response, aquaculture operations have moved further away from the coast. This development has created a need for clearer and more robust approaches to more comprehensively describe and secure sites for aquaculture. This article reviews the law governing the siting of aquaculture operations. In particular, it assesses the role of the widely used term "offshore" in the Law of the Sea to see if there are any legal aspects that need to be considered in moving towards the use of more specific concepts. It also aims to inform scientific discussions and political and administrative processes on the law governing the identification, description, and siting of aquaculture operations. This will hopefully contribute to more sustainable and less conflicted long-term aquaculture development. [ABSTRACT FROM AUTHOR]

The terms "offshore" and "open ocean" have been used to describe aquaculture sites that are further from the coast or in higher energy environments. Neither term has been clearly defined in the scientific literature nor in a legal context, and the terms are often used interchangeably. These and other related terms (for example "exposed", "high-energy") variously refer to aspects of a site such as the geographic distance from shore or infrastructure, the level of exposure to large waves and strong currents, the geographic fetch, the water depth, or some combination of these parameters. The ICES Working Group (ICES, 2024) on Open Ocean Aquaculture (WGOOA) therefore identified a need to define the terminology to reduce ambiguity for these types of aquaculture sites or more precisely, to: (1) promote a common understanding and avoid misuse for different classifications; (2) enable regulators to identify the characteristics of a marine site; (3) allow farmers to be able to assess or quantitatively compare sites for development; (4) equip developers and producers to identify operational parameters in which the equipment and vessels will need to operate; (5) provide insurers and investors with the terminology to consistently assess risk and premiums; and (6) circumvent the emergence of narratives that root in different cognitive interpretations of the terminology in public discourse. This paper describes the evolution of the use of the term "offshore aquaculture" and define the most relevant parameters to shift to a more definitive and robust term "exposed aquaculture" that can inherently relay clearer information. Adoption of this more definitive definition of "exposed" will allow the user to define a site with more than just distance from shore. Key differences and the importance of these terms are discussed that affect various interest groups. Follow-up articles in this compilation from scientific members of the WGOOA as well as other scientists outside ICES are incorporated that develop a set of definitions and a rigorous exposure index. [ABSTRACT FROM AUTHOR]