Search

Constructed wetlands offer an effective means for treatment of wastewater from a variety of sources. An understanding of the microbial ecology controlling nitrogen, carbon and sulfur cycles in constructed wetlands has been identified as the greatest gap for optimizing performance of these promising treatment systems. It is suspected that operational factors such as plant types and hydraulic operation influence the subsurface wetland environment, especially redox, and that the observed variation in effluent quality is due to shifts in the microbial populations and/or their activity. This study investigated the biofilm associated sulfate reducing bacteria and ammonia oxidizing bacteria (using the dsrB and amoA genes, respectively) by examining a variety of surfaces within a model wetland (gravel, thick roots, fine roots, effluent), and the changes in activity (gene abundance) of these functional groups as influenced by plant species and season. Molecular techniques were used including quantitative PCR and denaturing gradient gel electrophoresis (DGGE), both with and without propidium monoazide (PMA) treatment. PMA treatment is a method for excluding from further analysis those cells with compromised membranes. Rigorous statistical analysis showed an interaction between the abundance of these two functional groups with the type of plant and season (p

Floating islands are a form of treatment wetland characterized by a mat of synthetic matrix at the water surface into which macrophytes can be planted and through which water passes. We evaluated two matrix materials for treating domestic wastewater, recycled plastic and recycled carpet fibers, for chemical oxygen demand (COD) and nitrogen removal. These materials were compared to pea gravel or open water (control). Experiments were conducted in laboratory scale columns fed with synthetic wastewater containing COD, organic and inorganic nitrogen, and mineral salts. Columns were unplanted, naturally inoculated, and operated in batch mode with continuous recirculation and aeration. COD was efficiently removed in all systems examined (>90% removal). Ammonia was efficiently removed by nitrification. Removal of total dissolved N was ∼50% by day 28, by which time most remaining nitrogen was present as NO3-N. Complete removal of NO3-N by denitrification was accomplished by dosing columns with molasses. Microbial communities of interest were visualized with denaturing gradient gel electrophoresis (DGGE) by targeting specific functional genes. Shifts in the denitrifying community were observed post-molasses addition, when nitrate levels decreased. The conditioning time for reliable nitrification was determined to be approximately three months. These results suggest that floating treatment wetlands are a viable alternative for domestic wastewater treatment.

Biofouling of reverse osmosis (RO) membranes is a major impediment in both wastewater reuse and desalination of sea/brackish waters. A benefit to the industry would be a simple screening approach to evaluate biofouling resistant RO membranes for their propensity to biofoulants. To observe the relationship between initial membrane productivity and control of biofilm formation governed by surface modification to the aromatic polyamide thin-film composite RO membranes, three different RO membranes developed by the FilmTec Corporation including FilmTec's commercial membrane BW30 (RO#1) and two experimental membranes (RO #2 and #3) were used. RO #2 and RO #3 were modified with a proprietary aliphatic group and with an extra proprietary aromatic group, respectively. Membrane swatches were fixed on coupons in rotating disk reactor systems without filtration and exposed to water with indigenous organisms supplemented with 1.5 mg/L organic carbon under continuous flow. After biofouling had developed, the membranes were sacrificed and subjected to several analyses. Staining and epifluorescence microscopy revealed more cells on RO #2 and #3 compared to RO #1. Based on image analysis of 5-μm thick stained biofoulant cryo-sections, the accumulation of hydrated biofoulants on RO #1 and #3 were from 0.87 to 1.26 μm/day, which was lower than that on RO#2 (2.19 μm/day). Biofoulants increased the hydrophobicity of RO #2 to the greatest amount, up to 32°, as determined by contact angle. In addition, a wide range of changes of the chemical elements of the RO surfaces was observed with X-ray photoelectron spectroscopy analysis. RO #2 with the highest initial membrane productivity showed the poorest biofouling resistance. A combination of these novel approaches showed good agreement and suggested that membrane productivity, heterogeneity of anti-biofouling agents on membrane surface, stability of surface chemical elements and the role of virgin RO surface hydrophobicity should be jointly considered during the development of anti-biofouling polyamide thin-film RO surfaces.

This review summarizes the microbial mechanisms responsible for removal of carbon, nitrogen. and sulfur compounds in treatment wetlands (TWs) and identifies, categorizes and compares various techni ...

One of the prerequisites of making ecological conclusions derived from genetic fingerprints is that bacterial community profiles reflect the live portion of the sample of interest. Propidium monoazide is a membrane-impermeant dye that selectively penetrates cells with compromised membranes, which can be considered dead. Once inside the cells, PMA intercalates into the DNA and can be covalently cross-linked to it, which strongly inhibits PCR amplification. By using PCR after PMA treatment, the analysis of bacterial communities can theoretically be limited to cells with intact cell membranes. Four experiments were performed to study the usefulness of PMA treatment of mixed bacterial communities comprising both intact and compromised cells in combination with end-point PCR by generating community profiles from the following samples: (i) defined mixtures of live and isopropanol-killed cells from pure cultures of random environmental isolates, (ii) wastewater treatment plant influent spiked with defined ratios of live and dead cells, (iii) selected environmental communities, and (iv) a water sediment sample exposed to increasing heat stress. Regions of 16S rRNA genes were PCR amplified from extracted genomic DNA, and PCR products were analyzed by using denaturing gradient gel electrophoresis (DGGE). Results from the first two experiments show that PMA treatment can be of value with end-point PCR by suppressing amplification of DNA from killed cells. The last two experiments suggest that PMA treatment can affect banding patterns in DGGE community profiles and their intensities, although the intrinsic limitations of end-point PCR have to be taken into consideration.

The effect of 2,4-dichlorophenoxyacetic acid (2,4-D) application rate on microbial community structure and on the diversity of dominant 2,4-D degrading bacteria in an agricultural soil was examined using cultivation-independent molecular techniques coupled with traditional isolation and enumeration methods. Fingerprints of microbial communities established under increasing concentrations of 2,4-D (0-500 mg kg-1) in batch soil microcosms were obtained using denaturing gradient gel electrophoresis (DGGE) of PCR-amplified 16S rRNA gene segments. While a 2,4-D concentration of at least 100 mg kg-1 was required to obtain an apparent change in the community structure as visualized by DGGE, the greatest impact of 2,4-D concentration occurred in the 500 mg kg-1 treatment, resulting in significantly reduced diversity of the dominant populations and enrichment by Burkholderia-like populations. The greatest diversity of 2,4-D degrading isolates was cultivated from the 10 mg kg-1 treatment, indicating that under these conditions, cultivation was more sensitive than DGGE for detecting changes in community structure. Most of these isolates harbored homologs of Ralstonia eutrophus JMP134 and Burkholderia cepacia tfdA catabolic genes. Results from this study revealed that agriculturally relevant application rates of 2,4-D may provide a temporary selective advantage for organisms capable of utilizing 2,4-D as a carbon and energy source.

Ultra-clean sampling methods and approaches typically used in pristine environments were applied to quantify concentrations of Hg species in water and microbial biomass from hot springs of Yellowstone National Park, features that are geologically enriched with Hg. Microbial populations of chemically-diverse hot springs were also characterized using modern methods in molecular biology as the initial step toward ongoing work linking Hg speciation with microbial processes. Molecular methods (amplification of environmental DNA using 16S rDNA primers, cloning, denatured gradient gel electrophoresis (DGGE) screening of clone libraries, and sequencing of representative clones) were used to examine the dominant members of microbial communities in hot springs. Total Hg (THg), monomethylated Hg (MeHg), pH, temperature, and other parameters influential to Hg speciation and microbial ecology are reported for hot springs water and associated microbial mats. Several hot springs indicate the presence of MeHg in microbial mats with concentrations ranging from 1 to 10 ng g 1 (dry weight). Concentrations of THg in mats ranged from 4.9 to 120,000 ng g 1 (dry weight). Combined data from surveys of geothermal water, lakes, and streams show that aqueous THg concentrations range from l to 600 ng L 1 . Species and concentrations of THg in mats and water vary significantly between hot springs, as do the microorganisms found at each site. � 2006 Published by Elsevier Ltd.

We describe a combination of two established techniques for a novel application for constructing full-length cDNA clone libraries from environmental RNA. The cDNA was cloned without the use of prescribed primers that target specific genes, and the procedure did not involve random priming. Purified RNA was first modified by addition of a poly(A) tail and then was amplified by using a commercially available reverse transcriptase PCR (RT-PCR) cDNA synthesis kit. To demonstrate the feasibility of this approach, a cDNA clone library was constructed from size-fractionated RNA (targeting 16S rRNA) purified from a geothermally heated soil in Yellowstone National Park in Wyoming. The resulting cDNA library contained clones representing Bacteria and Eukarya taxa and several mRNAs. There was no exact clone match between this library and a separate cDNA library generated from an RT-PCR performed with unmodified rRNA and Bacteria -specific forward and universal reverse primers that were designed from cultivated organisms; however, both libraries contained representatives of the Firmicutes and the α- Proteobacteria . Unexpectedly, there were no Archaea clones in the library generated from poly(A)-modified RNA. Additional RT-PCRs performed with universal and Archaea -biased primers and unmodified RNA demonstrated the presence of novel Archaea in the soil. Experiments with pure cultures of Sulfolobus solfataricus and Halobacterium halobium revealed that some Archaea rRNA may not be a suitable substrate for the poly(A) tail modification step. The protocol described here demonstrates the feasibility of directly accessing prokaryote RNA (rRNA and/or mRNA) in environmental samples, but the results also illustrate potentially important problems.

Biofilms can play a major role for waterborne pathogens. Apart from being a ‘meeting place’ allowing for interaction with other microorganisms (bacteria, protozoa, viruses) and exchange of genetic material, the incorporation of pathogens into biofilms can pose a couple of distinct advantages compared with a planktonic lifestyle. This chapter aims to give an overview of current knowledge in this area and includes information about the efficiencies of different pathogens to form biofilms or to associate with existing biofilms and the consequences of being in this sheltered environment in regard to susceptibility to stress and disinfection, the pathogen’s phenotype and survival tendencies, and last but not least, for pathogenicity and infectivity.

Total nitrogen (TN) removal in treatment wetlands (TWs) is challenging due to nitrogen cycle complexity and the variation of influent nitrogen species. Plant species, season, temperature and hydraulic loading most likely influence root zone oxygenation and appurtenant nitrogen removal, especially for ammonium-rich wastewater. Nitrogen data were collected from two experiments utilizing batch-loaded (3-, 6-, 9- and 20-day residence times), sub-surface TWs monitored for at least one year during which temperature was varied between 4 and 24 °C. Synthetic wastewater containing 17 mg/l N as NH 4 and 27 mg/l amino-N, 450 mg/l chemical oxygen demand (COD), and 13 mg/l SO 4 -S was applied to four replicates of Carex utriculata , Schoenoplectus acutus and Typha latifolia and unplanted controls. Plant presence and species had a greater effect on TN removal than temperature or residence time. Planted columns achieved approximately twice the nitrogen removal of unplanted controls (40–95% versus 20–50% removal) regardless of season and temperature. TWs planted with Carex outperformed both Typha and Schoenoplectus and demonstrated less temperature dependency. TN removal with Carex was excellent at all temperatures and residence times; Schoenoplectus and Typha TN removal improved at longer residence times. Reductions in TN were not accompanied by increases in NO 3 , which was consistently below 1 mg/l N.

1. SUMMARY Drinking water systems are known to harbour biofilms, even though these environments are oligotrophic and often contain a disinfectant. Control of these biofilms is important for aesthetic and regulatory reasons. Study of full-scale systems has pointed to several factors controlling biofilm growth, but cause-and-effect relationships can only be established in controlled reactors. Using laboratory and pilot distribution systems, along with a variety of bacterial detection techniques, insights have been gained on the structure and behaviour of biofilms in these environments. Chlorinated biofilms differ in structure from non-chlorinated biofilms, but often the number of cells is similar. The number and level of cellular activity is dependent on the predominant carbon source. There is an interaction between carbon sources, the biofilm and the type of pipe material, which complicates the ability to predict biofilm growth. Humic substances, which are known to sorb to surfaces, appear to be a usable carbon source for biofilms. The finding offers an explanation for many of the puzzling observations in full scale and laboratory studies on oligotrophic biofilm growth. Pathogens can persist in these environments as well. Detection requires methods that do not require culturing.

Bacteria of the genus Salmonella are major human and animal pathogens worldwide, with over 2000 serotypes. Although most authorities agree that there are only one or two true species of Salmonella, serotypes are accepted as pseudo-species. In addition, although serotype identification is important, without additional subtyping, serotyping has limited usefulness for epidemiology as three serotypes (S. typhimurium, S. enteriditis, and S. heidelberg) account for 50% of human infections worldwide. The purpose of this review is to evaluate different methods of DNA typing and fingerprinting of Salmonella strains and to report the most important epidemiological and phylogenetic discoveries that have been made using these methods. These include plasmid analysis (plasmid profiles and plasmid fingerprints, restriction fragment length polymorphism (RFLP) analysis, and polymerase chain reaction (PCR) fingerprinting). Plasmids are common but not universal in Salmonella isolates and can be used to discriminate isolates...

Sources of variation in scoring bands in arbitrarily primed PCR (AP PCR) fingerprints of bacterial isolates were identified, and their effect on computer matching of fingerprints was determined. E. coli and five Salmonella serotypes were fingerprinted. PCR reactions and gel electrophoresis analysis of PCR products were replicated, including comparisons in the same gel and in different gels. Bands in the images were assigned by two different people on a presence–absence basis. Variations in scoring the images occurred at all levels, and prevented correct identification of isolates. E. coli was distinguished from Salmonella, but discrimination among different Salmonella serotypes and between two isolates of the same serotype was poor. Our results suggest that computer analysis of AP PCR fingerprints scored on a presence–absence basis may not correctly match isolates. Side-by-side visual comparison of isolates is recommended.

Current research to develop biosensors for the detection of pathogens and indicator organisms in source and finished water is motivated by their potential for rapid analysis compared to laborious and time-consuming cultural methods. There is great diversity in the biosensors being developed to detect E. coli O157:H7, both immunosensors that capture and detect whole cells and genosensors that capture and detect target nucleic acids. All biosensor designs must address both sensitivity and pathogen specificity, in order to minimize both false positives and false negatives. Improvements in sensitivity have resulted from the use of new labeling technologies, especially liposomes, which can encapsulate a large number of fluorescent dye molecules, and quantum dots, which emit a much brighter signal that conventional fluorescent dyes. Some biosensors have been designed to detect viable pathogens, including genosensors that detect transcription of a heat shock gene exclusively in viable cells. An inherent limitation of biosensors is the small capture surface in relation to the large volumes of water that must be sampled in order to assess the public health risk. This necessitates effective concentration methods; however, few researchers have specified how samples would be concentrated. Instead, most biosensors have only been tested in the laboratory using small volumes (

Microbial ecology has undergone a profound change in the last two decades with regard to methods employed for the analysis of natural communities. Emphasis has shifted from culturing to the analysis of signature molecules including molecular DNA-based approaches that rely either on direct cloning and sequencing of DNA fragments (shotgun cloning) or often rely on prior amplification of target sequences by use of the polymerase chain reaction (PCR). The pool of PCR products can again be either cloned and sequenced or can be subjected to an increasing variety of genetic profiling methods, including amplified ribosomal DNA restriction analysis, automated ribosomal intergenic spacer analysis, terminal restriction fragment length polymorphism, denaturing gradient gel electrophoresis, temperature gradient gel electrophoresis, single strand conformation polymorphism, and denaturing high-performance liquid chromatography. In this document, we present and critically compare these methods commonly used for the study of microbial diversity.

Two different strategies for molecular analysis of bacterial diversity, 16S rDNA cloning and denaturing gradient gel electrophoresis (DGGE), were combined into a single protocol that took advantage of the best attributes of each: the ability of cloning to package DNA sequence information and the ability of DGGE to display a community profile. In this combined protocol, polymerase chain reaction products from environmental DNA were cloned, and then DGGE was used to screen the clone libraries. Both individual clones and pools of randomly selected clones were analyzed by DGGE, and these migration patterns were compared to the conventional DGGE profile produced directly from environmental DNA. For two simple bacterial communities (biofilm from a humics-fed laboratory reactor and planktonic bacteria filtered from an urban freshwater pond), pools of 35-50 clones produced DGGE profiles that contained most of the bands visible in the conventional DGGE profiles, indicating that the clone pools were adequate for identifying the dominant genotypes. However, DGGE profiles of two different pools of 50 clones from a lawn soil clone library were distinctly different from each other and from the conventional DGGE profile, indicating that this small number of clones poorly represented the bacterial diversity in soil. Individual clones with the same apparent DGGE mobility as prominent bands in the humics reactor community profiles were sequenced from the clone plasmid DNA rather than from bands excised from the gel. Because a longer fragment was cloned (approximately 1500 bp) than was actually analyzed in DGGE (approximately 350 bp), far more sequence information was available using this approach that could have been recovered from an excised gel band. This clone/DGGE protocol permitted rapid analysis of the microbial diversity in the two moderately complex systems, but was limited in its ability to represent the diversity in the soil microbial community. Nonetheless, clone/DGGE is a promising strategy for fractionating diverse microbial communities into manageable subsets consisting of small pools of clones.

A novel bacterium was cultivated from an extreme thermal soil in Yellowstone National Park, Wyoming, USA, that at the time of sampling had a pH of 3.9 and a temperature range of 65-92 degrees C. This organism was found to be an obligate aerobic, non-spore-forming rod, and formed pink-colored colonies. Phylogenetic analysis of the 16S rRNA gene sequence placed this organism in a clade composed entirely of environmental clones most closely related to the phyla Chloroflexi and Thermomicrobia. This bacterium stained gram-positive, contained a novel fatty-acid profile, had cell wall muramic acid content similar to that of Bacillus subtilis (significantly greater than Escherichia coli), and failed to display a lipopolysaccharide profile in SDS-polyacrylamide gels that would be indicative of a gram-negative cell wall structure. Ultrastructure examinations with transmission electron microscopy showed a thick cell wall (approximately 34 nm wide) external to a cytoplasmic membrane. The organism was not motile under the culture conditions used, and electron microscopic examination showed no evidence of flagella. Genomic G+C content was 56.4 mol%, and growth was optimal at 67 degrees C and at a pH of 7.0. This organism was able to grow heterotrophically on various carbon compounds, would use only oxygen as an electron acceptor, and its growth was not affected by light. A new species of a novel genus is proposed, with YNP1(T) (T=type strain) being Thermobaculum terrenum gen. nov., sp. nov. (16S rDNA gene GenBank accession AF391972). This bacterium has been deposited in the American Type Culture Collection (ATCC BAA-798) and the University of Oregon Culture Collection of Microorganisms from Extreme Environments (CCMEE 7001).