Search

A green biocompatible route for the deposition and simultaneous assembly, by pH increment, of collagen/chitin composites was proposed. Both assembled and unassembled samples with different collagen/chitin ratios were synthesized, maintaining the β-chitin polymorph. The first set showed a microfibrous organization with compositional submicron homogeneity. The second set presented a nanohomogeneous composition based on collagen nanoaggregates and chitin nanofibrils. The sets were tested as scaffolds for fibroblast growth (NIH-3T3) to study the influence of composition and assembly. In the unassembled scaffolds, the positive influence of collagen on cell growth mostly worn out in 48 h, while the addition of chitin enhanced this effect for over 72 h. The assembled samples showed higher viability at 24 h but a less positive effect on viability along the time. This work highlighted critical aspects of the influence that composition and assembly has on fibroblast growth, a knowledge worth exploiting in scaffold design and preparation.

Laser Assisted Bioprinting (LAB) is recognized to be an enabling and versatile microfabrication technology for regenerative medicine and artificial tissue engineering. Current bioprinting concentrates on a layer-by-layer approach to print cells in consecutive stacks or nets, to recreate specialized tissue functions with a top-down approach. This synthering of proximal cells however reduces the long range correlation of tissue parenchyma and stroma given by natural development, as result of cells mobility and signaling. In this work, laminin, one of the main components of brain extracellular matrix is deposited by LAB on a biodegradable scaffold made of poly (lactic-co-glycolic acid) (PLGA), providing chemical cues for the adhesion and differentiation of neural stem cells NE-4C induced by retinoic acid. Surface roughness and LAB induced aggregates promote the initial adhesion of neuronal stem cells to the PLGA substrate and influence the formation of clusters and interconnection between them. The amount of laminin delivered inside the spot area may be controlled down to sub-monolayer coverage and a positive correlation between the laminin spots and soma of trafficking cells is demonstrated, also by computational modelling. Anisotropic orientation of neurite outgrowth is induced upon differentiation, up to 70% of processes protruding from stem cell clusters. The comparative analysis shows that the topological cue plays a major role in enhabling cluster formation on the scaffold, but the bioprinted laminin spots appear to be regulating the strength of connection between them, opening the way to control the functional morphology of artificial neural tissue constructs.

Inflammatory bowel diseases show a gender bias, as reported for several other immune-mediated diseases. Female-specific differences influence disease presentation and activity, leading to a different progression between males and females. Women show a genetic predisposition to develop inflammatory bowel disease related to the X chromosome. Female hormone fluctuation influences gastrointestinal symptoms, pain perception, and the state of active disease at the time of conception could negatively affect the pregnancy. Women with inflammatory bowel disease report a worse quality of life, higher psychological distress, and reduced sexual activity than male patients. This narrative review aims to resume the current knowledge of female-related features in clinical manifestations, development, and therapy, as well as sexual and psychological implications related to inflammatory bowel disease. The final attempt is to provide gastroenterologists with a roadmap of female-specific differences, to improve patients’ diagnosis, management, and treatment.

Nanoparticles (NPs) have been studied for biomedical applications, ranging from prevention, diagnosis and treatment of diseases. However, the lack of the basic understanding of how NPs interact with the biological environment has severely limited their delivery efficiency to the target tissue and clinical translation. Here, we show the effective regulation of the surface properties of NPs, by controlling the surface ligand density, and their effect on serum protein adsorption, cellular uptake and cytotoxicity. The surface properties of NPs are tuned through the controlled replacement of native ligands, which favor protein adsorption, with ligands capable of increasing protein adsorption resistance. The extent and composition of the protein layer adsorbed on NPs are strongly correlated to the degree of ligands replaced on their surface and, while BSA is the most abundant protein detected, ApoE is the one whose amount is most affected by surface properties. On increasing the protein resistance, cellular uptake and cytotoxicity in mouse embryonic fibroblasts of NPs are drastically reduced, but the surface coating has no effect on the process by which NPs mainly induce cell death. Overall, this study reveals that the tuning of the surface properties of NPs allows us to regulate their biological outcomes by controlling their ability to adsorb serum proteins. This journal is

In this work, nano-hybrid electrospun non-woven mats made of wool keratin combined with diclofenac loaded hydrotalcites (HTD) were prepared and characterized as potential drug delivery systems and scaffolds for fibroblast cell growth. Nano-hybrid electrospun non-woven mats showed a good adaptability to wet skin, effortlessly conforming to the three-dimensional topography of the tissue. Nanosized HTD exercised an overall reinforcing action on the electrospun non-woven mats since the nanohybrid samples displayed a reduced swelling ratio and a slower degradation profile compared to keratin-based nanofiber non-woven mats containing free diclofenac, without negative effects on drug release. The cell viability test indicated a decreased toxicity of the drug when loaded into nanofibers and confirmed the biocompatibility of keratin/HTD electrospun non-woven mats; moreover, a controlled diclofenac release within the first 24 hours does not compromise the fibroblast cell growth in a significant manner.

Here we applied a novel concept of "sublimation-aided nanostructuring" to control the polymorphism of a model material. The process exploits fractional precipitation as a tool for crystallisation in confinement using a templating agent that sublimes away from the system at the end of the process.

Nanomaterials are being widely used in medical applications and consumer products such as cosmetics, fabrics, and food packaging, although their impact on health and the environment is yet to be understood. Strategies enabling reliable and reproducible safety assessment of nanomaterials are needed because predicting their toxic effects is challenging as there is no simple correlation between their properties and the interaction with living systems. Here, the real-time monitoring of toxic effects induced by nano particles on cells using organic electrochemical transistors (OECTs) is reported. Noteworthy, OECTs are able to assess the coating-dependent toxicity of nanoparticles on both barrier and non-barrier tissue cells and, moreover, to monitor the cell health status as a function of exposure time, allowing useful insight on the interaction processes between nanomaterials and cells. These results demonstrate that OECTs are effective devices for real-time cell monitoring and in vitro assessment of nanomaterial toxicity.

The modification of amyloid fibrils cytotoxicity through exogenous nanomaterials is crucial to understand the processes controlling the role of protein aggregation in the related diseases. The influence of nanoparticles on amyloid stability yields great interest due to the small size and high surface area-to-volume ratio of nanoparticles. Various physico-chemical parameters play a role in the interaction of proteins and nanoparticles in solution, thus influencing the disaggregation of preformed fibrils. We have examined the influence of two kinds of metallic nanoparticles on lysozyme amyloid fibrils using a multi-technique approach and focalized their impact on cytotoxicity on human neuroblastoma cells (SH-SY5Y). In particular, fluorescence, infrared and circular dichroism spectroscopies, optical and atomic force microscopy experiments have been carried out; the results are analyzed to rationalize the effects of these complexes on neural cell viability. It is remarkable, that the fibrils in the presence of AuNPs, unlike fibrils alone or with AgNPs, do not generate a significant cytotoxic effect even at high concentration and an amyloid degradation effect is visible.

It is well known that amphiphilic cationic beta-cyclodextrins (am beta CDs) form nanovesicles able to release their cargo in aqueous solution upon applying different stimuli. In addition they can be selectively positioned onto substrates by unconventional soft lithography. This makes them a powerful tool for designing environments where different cues can be externally supplied to the cells helping to achieve good control of their fate. Lithographically controlled wetting (LCW) of am beta CD nanovesicles loaded with fluorescein isothiocyanate (FITC), am beta CD/FITC, has been used here to fabricate geometrically functionalized surfaces, thus achieving multiscale control of the cell environment. The am beta CD functionalization was strongly influenced by the surface energy of the underlying substrates that, according to their hydrophobicity, orient the am beta CD in a different way, thus "offering" different portions to the cells. The structure of the pattern was characterized both over large scales exploiting the FITC fluorescence and at the nanoscale by atomic force microscopy. Cell guidance and aCD/FITC cell internalization were demonstrated in human neuroblastoma SHSY5Y cells.

Peptide aggregation into oligomers and fibrillar architectures is a hallmark of severe neurodegenerative pathologies, diabetes mellitus or systemic amyloidoses. The polymorphism of amyloid forms and their distribution are both effectors that potentially modulate the disease, thus it is important to understand the molecular basis of protein amyloid disorders through the interaction of the different amyloid forms with neural cells and tissues. Here we explore the effect of amyloid fibrils on the human neuroblastoma (SH-SY5Y) cell line in vitro. We control the kinetic of fibrillization of insulin at low pH and higher temperature. We use a multiscale characterization via fluorescence microscopy and multimodal scanning probe microscopy to correlate the number of cells and their morphology, with the finer details of the insulin deposits. Our results show that insulin aggregates deposited on neuroblastoma cell cultures lead to a progressive modification and decreased number of cells that correlates with the degree of fibrillization. SPM unravels that the aggregates strongly interact with the cell membrane, forming a stiff encase that possibly leads to an increased cell membrane stiffness and deficit in the metabolic exchanges between the cells and their environment. The presence of fibrils does not affect the number of cells at 24h whereas drop down to 60% is observed after 48h of incubation.

A data-matrix (DM)-technology approach in cell biology is implemented as an efficient method for the multiparameter monitoring of cell cultures. The proposed method takes advantage of the know-how developed for fault tolerance in digital information technology by measuring the amount of errors induced by intervening cells upon checking a DM code placed behind them. It gives continuous access to several quantitative parameters of the observed culture, such as cell coverage, mean size, viability, and transfection efficiency.

Materials possessing long-term antibacterial behavior and high cytotoxicity are of extreme interest in several applications, from biomedical devices to food packaging. Furthermore, for the safeguard of the human health and the environment, it is also stringent keeping in mind the need to gather good functional performances with the development of ecofriendly materials and processes. In this study, we propose a green fabrication method for the synthesis of silver nanoparticles supported on oxidized nanocellulose (ONCs), acting as both template and reducing agent. The complete structural and morphological characterization shows that well-dispersed and crystalline Ag nanoparticles of about 10–20 nm were obtained in the cellulose matrix. The antibacterial properties of Ag-nanocomposites (Ag–ONCs) were evaluated through specific Agar diffusion tests against E. coli bacteria, and the results clearly demonstrate that Ag–ONCs possess high long-lasting antibacterial behavior, retained up to 85% growth bacteria inhibition, even after 30 days of incubation. Finally, cell viability assays reveal that Ag-ONCs show a significant cytotoxicity in mouse embryonic fibroblasts.

In this work, keratin sponges (Ks) containing magnetic MgFe hydrotalcites (HTlc) nanoparticles were prepared by freeze-drying and tested as 3D scaffolds for tissue regeneration. HTlc nanoparticles were well dispersed in the protein matrix and preserved their lamellar structure. The obtained hybrid materials showed a mean pore diameter of about 48 μm and a swelling ratio of about 6, higher than that of pure Ks (~ 4). Magnetic measurements indicated that the Ks-HTlc samples were magnetized more easily that the pure HTlc ones. Finally, the cell viability test, performed on osteoblasts under the effect of an applied static magnetic field, showed a substantial increase in cellular activity in the hybrid Ks-HTlc sponges compared to the nonmagnetic Ks sponges. Taken together, the reported results indicate that combining keratin with magnetic HTlc nanoparticles is a good strategy to obtain innovative 3D scaffold of potential interest in tissue regeneration, especially bone.

Supramolecular hydrogels, obtained from small organic molecules, may be advantageous over polymeric ones for several applications, because these materials have some peculiar properties that differentiate them from the traditional polymeric hydrogels, such as elasticity, thixotropy, self-healing propensity, and biocompatibility. We report here the preparation of strong supramolecular pseudopeptide-based hydrogels that owe their strength to the introduction of graphene in the gelling mixture. These materials proved to be strong, stable, thermoreversible and elastic. The concentration of the gelator, the degree of graphene doping, and the nature of the trigger are crucial to get hydrogels with the desired properties, where a high storage modulus coexists with a good thixotropic behavior. Finally, NIH-3T3 cells were used to evaluate the cell response to the presence of the most promising hydrogels. The hydrogels biocompatibility remains good, if a small degree of graphene doping is introduced.

Here, we present a suitable advancement of parallel local oxidation nanolithography, demonstrating its feasibility in alternate current mode (AC-PLON). For demonstration, we fabricated model structures consisting of an array of parallel nanostripes of electrochemical SiOx with a controlled roughness. Besides, we proved the repeatability of AC-PLON and its integrability with conventional parallel local oxidation nanolithography.

Current technologies to monitor formation and disruption in in vitro cell cultures are based either on optical techniques or on electrical impedance/resistance measurement, which often rely on cumbersome and time-consuming measurements and data analyses. In this paper, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based organic electrochemical transistors (OECTs) are proposed with channel areas specifically designed and dimensioned as fast and real-time monitoring devices for a large variety of cell lines, with a broad range of tissue resistance. In particular, it is investigated how and why two device configurations provide a different response to leaky-barrier (NIH-3T3) and strong-barrier (CaCo-2) cell lines growth and detachment, achieving a continuous monitoring also for leaky-barrier cell layer growth and detachment. Data are collected using the transistor dynamic behavior to a DC potential pulse on the gate, providing an excellent time resolution and thus enhancing the amount of information that can be collected for fast biological processes (

The formation of amyloid fibrils from soluble proteins is a common form of self-assembly phenomenon that has fundamental connections with biological functions and human diseases. Lysozyme was converted from its soluble native state into highly organized amyloid fibrils. Ultrasonic treatment was used to break amyloid fibrils to fibrillar fragments–seeds. Atomic force microscopy and fluorescence microscopy was employed to characterize the morphology of the amyloid assemblies and neural cells–amyloid complexes. Our results demonstrate that prefibrillar intermediated and their mixture with proteins exhibit toxicity, although native proteins and fibrils appear to have no effect on number of cells. Our findings confirm that innocuous hen lysozyme can be engineered to produce both cytotoxic fibrillar fragments and non-toxic mature amyloid fibrils. Our work further strengthens the claim that amyloid conformation, and not the identity of the protein, is key to cellular toxicity and the underlying specific cell death mechanism.

The controlled release of cell differentiating agents is crucial in many aspects of regenerative medicine. Here we propose the use of hybrid calcite single crystals as micro-carriers for the controlled and localized release of retinoic acid, which is entrapped within the crystalline lattice. The release of retinoic acid occurs only in the proximity of stem cells, upon dissolution of the calcite hybrid crystals that are dispersed in the fibrin scaffold. These hybrid crystals provide a sustained dosage of the entrapped agent. The environment provided by this composite scaffold enables differentiation towards neuronal cells that form a three-dimensional neuronal network.

We report on the fabrication of self-protective self-assembled monolayers constituted by a highly fluorescent component and a linear alkyl chain. We demonstrate the formation of an interpenetrated molecular network in which the alkyl component acts as an ultra-thin protective layer able to effectively shield the functional component from several types of aqueous solution.

Keratin (Ker) protein regenerated from readily available and low-cost wastes (e.g. raw wool, feathers and textile by-products) is a promising natural polymer for tissue engineering and drug delivery. Nevertheless, while showing good bioactivity and great drug carrier properties, keratin lacks of suitable mechanical characteristics. To overcome this drawback, keratin was blended with poly(butylene succinate) (PBS), a biodegradable and biocompatible polyester able to confer mechanical integrity to the keratin based materials. Despite the poor compatibility at the molecular level between keratin and PBS, their 50-50 blends were successfully electrospun into manageable mats, made of randomly oriented nanofibers with mean diameter of 290 nm. Along with mechanical properties, PBS improves also the thermal stability of the keratin based nanofibrous mats. On the other hand, compared to PBS-only electrospun mats, the presence of keratin improves both swelling ability and biodegradability and amplifies the capacity of diclofenac release as well as fibroblast proliferation of the blend mat.

A switchable electrode, which relies on an indium-tin oxide conductive substrate coated with a self-assembled monolayer terminated with an anthraquinone group (AQ), is reported as an electrowetting system. AQ electrochemical features confer the capability of yielding a significant modulation of surface wettability as high as 26° when its redox state is switched. Hence, an array of planar electrodes for droplets actuation is fabricated and integrated in a microfluidic device to perform mixing and dispensing on sub-nanoliter scale. Vehiculation of cells across microfluidic compartments is made possible by taking full advantage of surface electrowetting in culture medium., This work was funded by the innovative training networks (ITN) iSwitch 642196, European research council (ERC) StG 2012-306826 e-GAMES, Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Spanish Ministry project FANCY CTQ2016-80030-R, the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). M.S.M. is enrolled in the Materials Science PhD Program of Universitat Autònoma de Barcelona. S.C. acknowledges the People Programme (Marie Curie Actions) of the Seventh Framework Programme of the European Union (FP7/2007–2013) under Research Executive Agency Grant Agreement No. 600388 (TECNIOSpring programme), and from the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ.

Medical applications of nanoparticles (NPs) require understanding of their interactions with living systems in order to control their physiological response, such as cellular uptake and cytotoxicity. When NPs are exposed to biological fluids, the adsorption of extracellular proteins on the surface of NPs, creating the so-called protein corona, can critically affect their interactions with cells. Here, the effect of surface coating of silver nanoparticles (AgNPs) on the adsorption of serum proteins (SPs) and its consequence on cellular uptake and cytotoxicity in mouse embryonic fibroblasts are shown. In particular, citrate-capped AgNPs are internalized by cells and show a time- and dose-dependent toxicity, while the passivation of the NP surface with an oligo(ethylene glycol) (OEG)-alkanethiol drastically reduces their uptake and cytotoxicity. The exposure to growth media containing SPs reveals that citrate-capped AgNPs are promptly coated and stabilized by proteins, while the AgNPs resulting from capping with the OEG-alkanethiol are more resistant to adsorption of proteins onto their surface. Using NIH-3T3 cultured in serum-free, the key role of the adsorption of SPs onto surface of NPs is shown as only AgNPs with a preformed protein corona can be internalized by the cells and, consequently, carry out their inherent cytotoxic activity.

We report a novel strategy based on iterative microcontact printing, which provides additive, modular functionalization of reactive SAMs by different functional molecules. We demonstrate that after printing the molecules form an interpenetrating network at the SAM surface preserving their individual properties. We exploited the process by fabricating new optical storage media that consist of a multilevel TAG.

Electronic transducers of neuronal cellular activity are important devices in neuroscience and neurology. Organic field-effect transistors (OFETs) offer tailored surface chemistry, mechanical flexibility, and high sensitivity to electrostatic potential changes at device interfaces. These properties make them attractive for interfacing electronics with neural cells and performing extracellular recordings and stimulation of neuronal network activity. In this work we operate pentacene ultra-thin film (9 nm thick) transistors with a liquid gate both as transducers and electrical stimulators of neuronal network activity. These devices are highly sensitive to small potential changes in cell medium and exhibit sufficient stability under standard cell culture conditions for nine days. We show that murine neural stem cells can be adhered on top of functional devices without the need for an additional layer of cell-adhesive molecules, and then differentiated into neuronal networks. OFET response is monitored during the different phases of the neuronal differentiation process up to nine days. Only when stem cells are differentiated into neurons, it is possible to measure electrical signals in the OFET current following the stimulation. Due to the large sensing area of our device, which accommodates from hundreds to thousands of interconnected neurons, the OFET electrical signals arise from the collective electrophysiological response of the neuronal population. The maximum extracellular potential change in the cleft region adjacent to the transistor surface amounts to 350 mu V. This demonstrates that pentacene ultra-thin film OFETs enable good cellular adhesion and efficient coupling of the ionic currents at the biological-organic semiconductor interface with the OFET current.

The squid pen (gladius) from the Loligo vulgaris was used for preparation of β-chitin materials characterized by different chemical, micro- and nano-structural properties that preserved, almost completely the macrostructural and the mechanical ones. The β-chitin materials obtained by alkaline treatment showed porosity, wettability and swelling that are a function of the duration of the treatment. Microscopic, spectroscopic and synchrotron X-ray diffraction techniques showed that the chemical environment of the N-acetyl groups of the β-chitin chains changes after the thermal alkaline treatment. As a consequence, the crystalline packing of the β-chitin is modified, due to the intercalation of water molecules between β-chitin sheets. Potential applications of these β-chitin materials range from the nanotechnology to the regenerative medicine. The use of gladii, which are waste products of the fishing industry, has also important environmental implications.

The outgrowth formation in inorganic thin films is a dramatic problem that has limited the technological impact of many techniques and materials. Outgrowths are often themselves part of the films, but are detrimental for vertical junctions since they cause short-circuits or work as defects, compromising the reproducibility and in some cases the operation of the corresponding devices. The problem of outgrowth is particularly relevant in ablation-based methods and in some complex oxides, but is present in a large variety of systems and techniques. Here we propose an efficient local electrochemical method to selectively decompose the outgrowths of conductive oxide thin films by electrochemical decomposition, without altering the properties of the background film. The process is carried out using the same set-up as for local oxidation nanolithography, except for the sign of the voltage bias and it works at the nanoscale both as serial method using a scanning probe and as parallel method using conductive stamps. We demonstrated our process using La0.7Sr0.3MnO3 perovskite as a representative material but in principle it can be extended to many other conductive systems.

Anisotropic orientation and accurate positioning of neural cells is achieved by patterning stripes of the extracellular matrix protein laminin on the surface of polystyrene tissue culture dishes by micromoulding in capillaries (MIMICs). Laminin concentration decreases from the entrance of the channels in contact with the reservoir towards the end. Immunofluorescence analysis of laminin shows a decreasing gradient of concentration along the longitudinal direction of the stripes. The explanation is the superposition of diffusion and convection of the solute, the former dominating at length scales near the entrance (characteristic length around 50 μm), the latter further away (length scale in excess of 900 μm). These length scales are independent of the channel width explored from about 15 to 45 μm. Neural cells are randomly seeded and selectively adhere to the pattern, leaving the unpatterned areas depleted even upon 6 days of incubation. Cell alignment was assessed by the orientation of the long axis of the 4′,6-diamidino-2-phenylindole-stained nuclei. Samples on patterned the laminin area exhibit a large orientational order parameter. As control, cells on the unpatterned laminin film exhibit no preferential orientation. This implies that the anisotropy of laminin stripes is an effective chemical stimulus for cell recruiting and alignment.

A process for fabricating ordered organic films on large area is presented. The process allows growing sexithiophene ultra-thin films at precise locations on patterned Si/SiO(x) substrates by driving the orientation of growth. This process combines the parallel local anodic oxidation of Si/SiO(x) substrates with the selective arrangement of molecular ultra-thin film. The former is used to fabricate silicon oxide arrays of parallel lines of 400 nm in width over an area of 1 cm(2). Selective growth arises from the interplay between kinetic growth parameters and preferential interactions with the patterned surface. The result is an ultra-thin film of organic molecules that is conformal to the features of the fabricated motives.