Search

Creating a good contact between electrodes and graphene nanoribbons (GNRs) has been a long-standing challenge in searching for the next GNR-based nanoelectronics. This quest requires the controlled fabrication of sub-20 nm metallic gaps, a clean GNR transfer minimizing damage and organic contamination during the device fabrication, as well as work function matching to minimize the contact resistance. Here, we transfer 9-atom-wide armchair-edged GNRs (9-AGNRs) grown on Au(111)/mica substrates to pre-patterned platinum electrodes, yielding polymer-free 9-AGNR field-effect transistor devices. Our devices have a resistance in the range of 106-108 Ω in the low-bias regime, which is 2-4 orders of magnitude lower than previous reports. Density functional theory calculations combined with the non-equilibrium Green's function method explain the observed p-type electrical characteristics and further demonstrate that platinum gives strong coupling and higher transmission in comparison to other materials, such as graphene., Applied Physics Letters, 122 (17), ISSN:0003-6951, ISSN:1077-3118

Porphyrin cyclophane 1, consisting of two rigidly fixed but still movable cofacial porphyrins and exposing acetate-masked thiols in opposed directions of the macrocycle, is designed, synthesized, and characterized. The functional cyclophane 1, as pioneer of mechanosensitive 3D materials, forms stable single-molecule junctions in a mechanically controlled break-junction setup. Its reliable integration in a single-molecule junction is a fundamental prerequisite to explore the potential of these structures as mechanically triggered functional units and devices.

This paper describes the conductance of single-molecules and self-assembled monolayers comprising an oligophenyleneethynylene core, functionalized with acenes of increasing length that extend conjugation perpendicular to the path of tunneling electrons. In the Mechanically Controlled Break Junction (MCBJ) experiment, multiple conductance plateaus were identified. The high conductance plateau, which we attribute to the single molecule conformation, shows an increase of conductance as a function of acene length, in good agreement with theoretical predictions. The lower plateau is attributed to multiple molecules bridging the junctions with intermolecular interactions playing a role. In junctions comprising a self-assembled monolayer with eutectic Ga–In top-contacts (EGaIn), the pentacene derivative exhibits unusually low conductance, which we ascribe to the inability of these molecules to pack in a monolayer without introducing significant intermolecular contacts. This hypothesis is supported by the MCBJ data and theoretical calculations showing suppressed conductance through thePCfilms. These results highlight the role of intermolecular effects and junction geometries in the observed fluctuations of conductance values between single-molecule and ensemble junctions, and the importance of studying molecules in both platforms.

Switching effects are key elements in the design and characterization of nanoscale molecular electronics systems. They are used to achieve functionality through the transition between different conducting states. In this study, we analyze the presence of switching events in reference molecular systems, which are not designed to have switching behavior, such as oligo(phenylene ethynylene)s and alkanes, using the mechanically controllable break junction technique. These events can be classified in two groups, depending on whether the breaking trace shows exponential decay or plateau-like features before the switch happens. We argue that the former correspond to junctions forming after rupture of the gold atomic point contact, while the latter can be related to a change in the contact geometry of the junction. These results highlight how a proper choice of anchoring group and careful comparison with reference compounds are essential to understanding the origin of switching in molecular break junctions.

Alkanes serve an important role as benchmark system in molecular electronics. However, a large variation in the conductance values is reported in the literature. To better understand these fluctuations, in this study we measure large molecular data sets (up to 100 000 breaking traces) of a series of alkanes with different lengths and anchoring groups using the mechanically controlled break junction (MCBJ) technique. Employing an unsupervised learning algorithm, we investigate both the time evolution and the distance dependence of the measured traces. For all the molecules considered, we have been able to identify the single-molecule conductance value for the fully stretched molecular configuration. For alkanedithiols, the corresponding extracted β decay constant of 1.05 ± 0.08 per CH2group agrees well with literature values. In the case of the stronger thiol bonding, additional peaks in the conductance histograms are found, suggesting the formation of molecular junctions containing a single molecule plus additional gold/molecule unit(s). The results shine light on the dispersion in reported conductance values and show that the evolution of the molecule as a function of stretching and time contains crucial information in determining the molecular junction configuration in MCBJs.

Unsupervised machine learning, and in particular data clustering, is a powerful approach for the analysis of datasets and identification of characteristic features occurring throughout a dataset. It is gaining popularity across scientific disciplines and is particularly useful for applications without a priori knowledge of the data structure. Here, we introduce an approach for unsupervised data classification of any dataset consisting of a series of univariate measurements. It is therefore ideally suited for a wide range of measurement types. We apply it to the field of nanoelectronics and spectroscopy to identify meaningful structures in data sets. We also provide guidelines for the estimation of the optimum number of clusters. In addition, we have performed an extensive benchmark of novel and existing machine learning approaches and observe significant performance differences. Careful selection of the feature space construction method and clustering algorithms for a specific measurement type can therefore greatly improve classification accuracies.

Atomically precise graphene nanoribbons (GNRs) are a promising emerging class of designer quantum materials with electronic properties that are tunable by chemical design. However, many challenges remain in the device integration of these materials, especially regarding contacting strategies. We report on the device integration of uniaxially aligned and non-aligned 9-atom wide armchair graphene nanoribbons (9-AGNRs) in a field-effect transistor geometry using electron beam lithography-defined graphene electrodes. This approach yields controlled electrode geometries and enables higher fabrication throughput compared to previous approaches using an electrical breakdown technique. Thermal annealing is found to be a crucial step for successful device operation resulting in electronic transport characteristics showing a strong gate dependence. Raman spectroscopy confirms the integrity of the graphene electrodes after patterning and of the GNRs after device integration. Our results demonstrate the importance of the GNR-graphene electrode interface and pave the way for GNR device integration with structurally well-defined electrodes.

We report on charge transport across single short peptides using the Mechanically Controlled Break Junction (MCBJ) method. We record thousands of electron transport events across single-molecule junctions and with an unsupervised machine learning algorithm, we identify several classes of traces with multifarious conductance values that may correspond to different peptide conformations. Data analysis shows that very short peptides, which are more rigid, show conductance plateaus at low conductance values of about 10−3G0and below, withG0being the conductance quantum, whereas slightly longer, more flexible peptides also show plateaus at higher values. Fully stretched peptide chains exhibit conductance values that are of the same order as that of alkane chains of similar length. The measurements show that in the case of short peptides, different compositions and molecular lengths offer a wide range of junction conformations. Such information is crucial to understand mechanism(s) of charge transport in and across peptide-based biomolecules.

By studying transport through seven structurally related porphyrin derivatives with a machine learning algorithm we could identify and distinguish three different electronic paths., Porphyrin derivatives are key components in natural machinery enabling us to store sunlight as chemical energy. In spite of their prominent role in cascades separating electrical charges and their potential as sensitizers in molecular devices, reports concerning their electronic transport characteristics are inconsistent. Here we report a systematic investigation of electronic transport paths through single porphyrin junctions. The transport through seven structurally related porphyrin derivatives was repeatedly measured in an automatized mechanically controlled break-junction set-up and the recorded data were analyzed by an unsupervised clustering algorithm. The correlation between the appearances of similar clusters in particular sub-sets of the porphyrins with a common structural motif allowed us to assign the corresponding current path. The small series of model porphyrins allowed us to identify and distinguish three different electronic paths covering more than four orders of magnitude in conductance.

The resistive switching behavior in SiOx-based phase change memory devices confined by few nanometer wide graphene nanogaps is investigated. Our experiments and analysis reveal that the switching dynamics is not only determined by the commonly observed bias voltage dependent set and reset times. We demonstrate that an internal time scale, the dead time, plays a fundamental role in the system’s response to various driving signals. We associate the switching behavior with the formation of microscopically distinct SiOx amorphous and crystalline phases between the graphene electrodes. The reset transition is attributed to an amorphization process due to a voltage driven self-heating; it can be triggered at any time by appropriate voltage levels. In contrast, the formation of the crystalline ON state is conditional and only occurs after the completion of a thermally assisted structural rearrangement of the as-quenched OFF state which takes place within the dead time after a reset operation. Our results demonst...

Graphene nanoribbons (GNRs) have attracted much interest due to their largely modifiable electronic properties. Manifestation of these properties requires atomically precise GNRs which can be achieved through a bottom-up synthesis approach. This has recently been applied to the synthesis of width-modulated GNRs hosting topological electronic quantum phases, with valence electronic properties that are well captured by the Su-Schrieffer-Heeger (SSH) model describing a 1D chain of interacting dimers. Here, ultralow bandgap GNRs with charge carriers behaving as massive Dirac fermions can be realized when their valence electrons represent an SSH chain close to the topological phase boundary, i.e., when the intra- and interdimer coupling become approximately equal. Such a system has been achieved via on-surface synthesis based on readily available pyrene-based precursors and the resulting GNRs are characterized by scanning probe methods. The pyrene-based GNRs (pGNRs) can be processed under ambient conditions and incorporated as the active material in a field effect transistor. A quasi-metallic transport behavior is observed at room temperature, whereas at low temperature, the pGNRs behave as quantum dots showing single-electron tunneling and Coulomb blockade. This study may enable the realization of devices based on carbon nanomaterials with exotic quantum properties.

One of the main challenges to upscale the fabrication of molecular devices is to achieve a mechanically stable device with reproducible and controllable electronic features that operates at room temperature1,2. This is crucial because structural and electronic fluctuations can lead to significant changes in the transport characteristics at the electrode–molecule interface3,4. In this study, we report on the realization of a mechanically and electronically robust graphene-based molecular junction. Robustness was achieved by separating the requirements for mechanical and electronic stability at the molecular level. Mechanical stability was obtained by anchoring molecules directly to the substrate, rather than to graphene electrodes, using a silanization reaction. Electronic stability was achieved by adjusting theπ–πorbitals overlap of the conjugated head groups between neighbouring molecules. The molecular devices exhibited stable current–voltage (I–V) characteristics up to bias voltages of 2.0 V with reproducible transport features in the temperature range from 20 to 300 K.

Porphyrin derivatives are key components in natural machinery enabling us to store sunlight as chemical energy. In spite of their prominent role in cascades separating electrical charges and their potential as sensitizers in molecular devices, reports concerning their electronic transport characteristics are inconsistent. Here we report a systematic investigation of electronic transport paths through single porphyrin junctions. The transport through seven structurally related porphyrin derivatives was repeatedly measured in an automatized mechanically controlled break-junction set-up and the recorded data were analyzed by an unsupervised clustering algorithm. The correlation between the appearances of similar clusters in particular sub-sets of the porphyrins with a common structural motif allowed us to assign the corresponding current path. The small series of model porphyrins allowed us to identify and distinguish three different electronic paths covering more than four orders of magnitude in conductance.

A new concept to improve the reliability of functional single molecule junctions is presented using the E-field triggered switching of FeIIbis-terpyridine complexes in a mechanically controlled break junction experiment as model system. The complexes comprise a push-pull ligand sensing the applied E-field and the resulting distortion of the FeII ligand field is expected to trigger a spin-crossover event reflected in a sudden jump of the transport current. By molecular engineering, the active centre of the complex is separated from the gold electrodes in order to eliminate undesired side-effects. Two aspects are considered to isolate the central metal ion, namely the spacing by introducing additional alkynes, and the steric shielding achieved by bulky isopropyl groups. With this small series of model complexes, a pronounced correlation is observed between the occurrence of bistable junctions and the extent of separation of the central metal ion, affirming the hypothesized Enhanced Separation Concept (ESC). &nbsp

Single-molecule break-junction measurements are intrinsically stochastic in nature, requiring the acquisition of large datasets of “breaking traces” to gain insight into the generic electronic properties of the molecule under study. For example, the most probable conductance value of the molecule is often extracted from the conductance histogram built from these traces. In this letter, we present an unsupervised and reference-free machine learning tool to improve the determination of the conductance of oligo(phenylene ethynylene)dithiol from mechanically controlled break-junction (MCBJ) measurements. Our method allows for the classification of individual breaking traces based on an image recognition technique. Moreover, applying this technique to multiple merged datasets makes it possible to identify common breaking behaviors present across different samples, and therefore to recognize global trends. In particular, we find that the variation in the extracted molecular conductance can be significantly reduced resulting in a more reliable estimation of molecular conductance values from MCBJ datasets. Finally, our approach can be more widely applied to different measurement types which can be converted to two-dimensional images.

A new concept to improve the reliability of functional single molecule junctions is presented using the E-field triggered switching of FeIIbis-terpyridine complexes in a mechanically controlled break junction experiment as model system. The complexes comprise a push-pull ligand sensing the applied E-field and the resulting distortion of the FeII ligand field is expected to trigger a spin-crossover event reflected in a sudden jump of the transport current. By molecular engineering, the active centre of the complex is separated from the gold electrodes in order to eliminate undesired side-effects. Two aspects are considered to isolate the central metal ion, namely the spacing by introducing additional alkynes, and the steric shielding achieved by bulky isopropyl groups. With this small series of model complexes, a pronounced correlation is observed between the occurrence of bistable junctions and the extent of separation of the central metal ion, affirming the hypothesized Enhanced Separation Concept (ESC).

Graphene nanoribbons (GNRs) have attracted a strong interest from researchers worldwide, as they constitute an emerging class of quantum-designed materials. The major challenges towards their exploitation in electronic applications include reliable contacting, complicated by their small size ($, Comment: 18 pages, 5 figures

One of the main challenges to upscale the fabrication of molecular devices is to achieve a mechanically stable device with reproducible and controllable electronic features that operates at room temperature1,2. This is crucial because structural and electronic fluctuations can lead to significant changes in the transport characteristics at the electrode-molecule interface3,4. In this study, we report on the realization of a mechanically and electronically robust graphene-based molecular junction. Robustness was achieved by separating the requirements for mechanical and electronic stability at the molecular level. Mechanical stability was obtained by anchoring molecules directly to the substrate, rather than to graphene electrodes, using a silanization reaction. Electronic stability was achieved by adjusting the π-π orbitals overlap of the conjugated head groups between neighbouring molecules. The molecular devices exhibited stable current-voltage (I-V) characteristics up to bias voltages of 2.0 V with reproducible transport features in the temperature range from 20 to 300 K.

We report on the characterization of the electrical breakdown (EB) process for the formation of tunneling nanogaps in single-layer graphene. In particular, we investigated the role of oxygen in the breakdown process by varying the environmental conditions (vacuum and ambient conditions). We show that the density of oxygen molecules in the chamber is a crucial parameter that defines the physical breakdown process: at low density, the graphene lattice is sublimating, whereas at high density, the process involved is oxidation, independent of the substrate material. To estimate the activation energies of the two processes, we use a scheme which consists of applying voltage pulses across the junction during the breakdown. By systematically varying the voltage pulse length, and estimating the junction temperature from a 1D thermal model, we extract activation energies which are consistent with the sublimation of graphene under high vacuum and the electroburning process under air. Our study demonstrates that, in our system, a better control of the gap formation is achieved in the sublimation regime.

We systematically investigate the impact of granularity in CVD graphene films by performing Raman mapping and electrical characterization of single (SD) and multi domain (MD) graphene. In order to elucidate the quality of the graphene film, we study its regional variations using large-area Raman mapping and compare the G and 2D peak positions of as-transferred chemical vapor deposited (CVD) graphene on SiO 2 substrate. We find a similar upshift in wavenumber in both SD and MD graphene in comparison to freshly exfoliated graphene. In our case, doping could play the dominant role behind the observation of such upshifts rather than the influence due to strain. Interestingly, the impact of the polymer-assisted wet transfer process is the same in both the CVD graphene types. The electrical characterization shows that SD graphene exhibits a substantially higher (a factor 5) field-effect mobility when compared to MD graphene. We attribute the low sheet resistance and mobility enhancement to a decrease in charge carrier scattering thanks to a reduction of the number of grain boundaries and defects in SD graphene