Search

An iridescent carbon nitrogen film g-C3N4 was formed by chemical vapor deposition (CVD) on an aluminum sheet starting from melamine cyanurate as a precursor at a temperature of 600 °C. The film was...

In recent decades, nanodiamonds (NDs) have earned increasing interest in a wide variety of research fields, thanks to their excellent mechanical, chemical, and optical properties, together with the possibility of easily tuning their surface chemistry for the desired purpose. According to the application context, it is essential to acquire an extensive understanding of their interaction with water in terms of hydrophilicity, environmental adsorption, stability in solution, and impact on electrical properties. In this paper, we report on a systematic study of the effects of reducing and oxidizing thermal processes on ND surface water adsorption. Both detonation and milled NDs were analyzed by combining different techniques. Temperature-dependent infrared spectroscopy was employed to study ND surface chemistry and water adsorption, while dynamic light scattering allowed the evaluation of their behavior in solution. The influence of water adsorption on their electrical properties was also investigated and correlated with structural and optical information obtained via Raman/photoluminescence spectroscopy. In general, higher oxygen-containing surfaces exhibited higher hydrophilicity, better stability in solution, and higher electrical conduction, although for the latter the surface graphitic contribution was also crucial. Our results provide in-depth information on the hydrophilicity of NDs in relation to their surface chemical and physical properties, by also evaluating the impacts on their aggregation and electrical conductance.

The increasingly stringent emission limits require high performances also at high mileage, increasing the need for reliable catalysts characterization during their whole useful life. Thermal ageing is the main problem: high temperatures, variable environment and the presence of water lead to a progressive deactivation of the components. Due to the cost of ageing a converter on-road or on an engine bench, much more rapid laboratory aging methods are now becoming very interesting, rising the problem of the correlation between real and accelerated ageing conditions. In this work a series of identical catalysts aged in different conditions are characterized in order to understand the correlation between the real and accelerated ageing protocols. Applying a wide spectrum of techniques (XRD, SEM, TEM, BET) a complete morphological characterization is performed and interlaced with functional testing, in order to understand the link between the catalysts modification due to thermal effects and their deactivation, and to allow the design of more realistic laboratory ageing protocols. The correlation between real samples, coming from an ageing on an engine, and laboratory ageing is good for the medium-high mileage sample, which results very similar in terms of performance and morphology with the sample aged at hydro-thermal condition. Some differences remain due to the chemical ageing, which was not possible to replicate on the laboratory scale.

Ageing of automotive catalysts is associated to a loss of their functionality and ultimately to a waste of precious resources. For this reason, understanding catalyst ageing phenomena is necessary for the design of long lasting efficient catalysts. The present work has the purpose of studying in depth all the phenomena that occur during ageing, in terms of morphological modification and deactivation of the active materials: precious metal particles and oxidic support. The topic was deeply investigated using specific methodologies (FT-IR, CO chemisorption, FE-SEM) in order to understand the behavior of metals and support, in terms of their surface properties, morphology and dispersion in the washcoat material. A series of commercial catalysts, aged in different conditions, have been analyzed, in order to find correlations between real and simulated ageing conditions. The characterization highlights a series of phenomena linked to the deactivation of the catalysts. Pd nanoparticles undergo a rapid agglomeration, exhibiting a quick loss of dispersion and of active sites with an increase of particles size. The evolution of the support allows highlighting also the contribution of chemical ageing effects. These results were also correlated with performance tests executed on synthetic gas bench, underlining a good correspondence between vehicle and laboratory aged samples and the contribution of chemical poisoning to vehicle aged ones. The collected data are crucial for the development of accelerated laboratory ageing protocols, which are instrumental for the development and testing of long lasting abatement systems.

Chitin (a biopolymer obtained from shellfish industry) was used as precursor for the production of biochars obtained via pyrolysis treatments performed at mild conditions (in the 290–540 °C range). Biochars were physicochemical characterized in order to evaluate the pyrolysis-induced effects in terms of both functional groups and material structure. Moreover, such carbonaceous materials were tested as adsorbent substrates for the removal of target molecules from aqueous environment as well as in solid-gas experiments, to measure the adsorption capacities and selectivity toward CO2. Lastly, biochars were also investigated as possible cathode materials in sustainable and low-cost electrochemical energy storage devices, such as lithium-sulphur (Li-S) batteries. Interestingly, experimental results evidenced that such chitin-derived biochars obtained via pyrolysis at mild conditions are sustainable, low-cost and easy scalable alternative materials suitable for both environmental and energetic applications.

An in vitro study was carried out in order to investigate the antibiotic release mechanism and the antibacterial properties of commercially (Palacos® R + G and Palacos® LV + G) and manually (Palacos® R + GM and Palacos® LV + GM) blended gentamicin-loaded bone cements. Samples were characterized by means of scanning electron microscopy (SEM) and compression strength was evaluated. The antibiotic release was investigated by dipping sample in simulated body fluid (SBF) and periodically analyzing the solution by means of high pressure liquid chromatography (HPLC). Different antibacterial tests were performed to investigate the possible influence of blending technique on antibacterial properties. Only some differences were observed between gentamicin manually added and commercial ones, in the release curves, while the antibacterial effect and the mechanical properties seem to not feel the blending technique.

The reaction between ozone and the three cresol isomers was investigated in pure water. Cresols were selected as model substrates representing an important component of humic material. Cresols carry both a hydroxyl and a methyl group, each theoretically increasing the reactivity of ozone with the aromatic ring. Direct comparison of the aromatic ring and the methyl group reactivities was made possible by the analysis of reaction products. The substrate degradation kinetics was studied by preparing aqueous solutions of each cresol and treating them with ozone for increasing time periods. It had been hypothesized that hydroxybenzaldehydes and hydroxybenzoic acids could be possible degradation intermediates of cresols. To verify this hypothesis, the degradation kinetics of three hydroxybenzaldehydes and two hydroxybenzoic acids were also studied. The reaction products were studied using gas chromatography (GC)-electron capture negative ionization (ECNI)-mass spectrometry (MS) analysis after direct derivatization of the samples with 5-chloro-2,2,3,3,4,4,5,5-octafluoro-1-pentyl chloroformate (ClOFPCF). This new analytical approach enables the extraction and analysis of highly polar polycarboxylic and hydroxycarboxylic acids, as well as highly polar aldehydes and hydroxy aldehydes that are difficult to extract and measure using conventional methods. As such, this new approach offered insights into ozone reaction intermediates that had been previously hypothesized, but not confirmed. Several highly hydrophilic degradation intermediates were identified, including malic, citraconic, itaconic, malonic, methylmuconic, and tartronic acid, but no hydroxybenzaldehydes were observed. The results support a 3-stage mechanism previously hypothesized, which involves ring-opening of the phenolic group, followed by the generation of several intermediates of increasing oxidation state, finally leading to relatively stable products, such as malonic and oxalic acids. We demonstrated that oxidation of the methyl group does not occur during cresol degradation.

A novel derivatizing agent, 5-chloro-2,2,3,3,4,4,5,5-octafluoropentyl chloroformate (ClOFPCF), was synthesized and tested as a reagent for direct water derivatization of highly polar and hydrophilic analytes. Its analytical performance satisfactorily compared to a perfluorinated chloroformate previously described, namely 2,2,3,3,4,4,5,5-octafluoropentyl chloroformate (OFPCF). The chemical properties (reactivity, selectivity, derivatization products, and their chromatographic and spectral features) for ClOFPCF were investigated using a set of 39 highly polar standard analytes, including, among others, hydroxylamine, malic and succinic acids, resorcinol, hydroxybenzaldehyde, and dihydroxybenzoic acid. Upon derivatization, the analytes were extracted from the aqueous solvent and analyzed by gas chromatography (GC)-mass spectrometry (MS) in the electron-capture negative ionization (ECNI) mode. Positive chemical ionization (PCI)-MS was used for confirming the molecular ions, which were virtually absent in the ECNI mass spectra. ClOFPCF showed good reaction efficiency, good chromatographic and spectroscopic properties (better than with OFPCF), good linearity in calibration curves, and low detection limits (0.3-1 microg/L). A unique feature of the derivatizations with ClOFPCF, and, in general, highly fluorinated chloroformates, is their effectiveness in reacting with carboxylic, hydroxylic, and aminic groups at once, forming multiply-substituted non-polar derivatives that can be easily extracted from the aqueous phase and determined by GC-ECNI-MS. The entire procedure from raw aqueous sample to ready-to-inject hexane solution of the derivatives requires less than 10 min. Another benefit of this procedure is that it produced stable derivatives, with optimal volatility for GC separation, and high electron affinity, which allows their detection as negative ions at trace level. In addition, their mass spectra exhibits chlorine isotopic patterns that clearly indicate how many polar hydrogens of the analyte undergo derivatization. Finally, derivatization with ClOFPCF was used successfully to identify 13 unknown highly polar disinfection byproducts (DBPs) in ozonated fulvic and humic acid aqueous solutions and in real ozonated drinking water.

Four highly-fluorinated alkyl and aryl chloroformates, including 2,2,3,3,4,4,5,5-octafluoro-1-pentyl chloroformate (OFPCF), 2,3,4,5,6-pentafluorobenzyl chloroformate (PFBCF), 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-1-octyl chloroformate (TDFOCF), and 2-(2,3,4,5,6-pentafluorophenoxy)-ethyl chloroformate (PFPECF), were synthesized and tested as reagents for the direct water derivatization of polar and hydrophilic analytes. The goal of this research was to develop an optimal derivatizing agent to aid in the identification of highly polar ozonation drinking water disinfection by-products (DBPs) that are believed to be missed with current analytical procedures. The chemical properties (reactivity, selectivity, derivatization products, and their chromatographic and spectral features) for the four chloroformates were investigated using a set of highly polar standard analytes, including malic and tartaric acids, hydroxylamine, valine, 2-aminoethanol, resorcinol, 1,3,5-trihydroxybenzene, and 2,4-dihydroxybenzoic acid. Upon derivatization, the analytes were extracted from the aqueous solvent and analyzed by gas chromatography (GC)-mass spectrometry (MS) in the electron capture negative ionization (ECNI) mode. Positive chemical ionization (PCI)-MS was used for confirmation of molecular ions that were weak or absent in ECNI mass spectra. Of the four derivatizing reagents tested, OFPCF showed the best performance, with good reaction efficiency, good chromatographic and spectroscopic properties, low detection limits (10–100 fmol), and a linear response more than two orders of magnitude. Further, the entire procedure from raw aqueous sample to ready-to-inject hexane solutions of the derivatives requires less than 10 min. PFBCF showed ideal applicability for derivatizing aminoalcohols and aminoacids. The two chloroformates with the highest intrinsic stability (TDFOCF and PFPECF) failed to derivatize some of the analytes. Finally, the OFPCF derivatizing agent was tested with simulated ozonated drinking water (aqueous fulvic acid treated with ozone), and three highly polar reaction by-products were determined.

A rapid, safe, and efficient procedure was developed to synthesize, on a small scale, fluorinated chloroformates often required to perform analytical derivatizations. This new family of agents allows straightforward derivatization of highly polar compounds (with multiple hydroxy, carboxy, and amino substituents) in the aqueous phase, compatible with GC and GC/MS analysis. A goal of this work was to develop a derivatization procedure that would enable the detection and identification of highly polar disinfection by-products in drinking water.