Search

Your search keyword '"Mareček, Petr"' showing total 48 results
Start Over Author "Mareček, Petr"
48 results on '"Mareček, Petr"'

1. Pavel v Arábii (Gal 1,17).

Author

Mareček, Petr

Subjects
CHRISTIAN missionaries, JEWISH communities, CITIES & towns, PRIMITIVE & early church, ca. 30-600, SYNAGOGUES, MISSIONARIES, EVANGELISTS
Abstract

The Epistle to the Galatians, which is the richest in historical references to Paul's conversion and his apostolic activity (Gal 1:11-2:21), contains one of the most interesting remarks in Paul's letters, "I went to Arabia" (Gal 1:17b). This brief autobiographical statement is not easy to clarify. A careful consideration of all the factors leads to the conclusion that Paul travelled to the territory of the Nabatean kingdom to do missionary work there. In keeping with Paul's later missionary activity, which is oriented toward large cities, and which usually begins in a Jewish synagogue, it is plausible to assume that Paul followed a similar missionary strategy in Arabia and that he therefore focused on large cities (Petra, Hegra, Bosra) in which Jewish communities, perhaps with a certain circle of sympathizers, may also have been present. The main reason for Paul's journey to Arabia was in all probability the fact that this territory had been neglected by Christian missionaries in the early church and that he could therefore preach the gospel where the name of Christ was not yet known. Paul's missionary activity in Arabia, which undoubtedly must have involved a longer period (one or two years), as is evident from the later conflict with the governor under King Aretas after his return to Damascus (2 Cor 11:32), was probably not successful and met with considerable opposition, since there is no evidence of Christian communities having been established in the territory. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

5. Kristova láska a jeho smrt za všechny v 2 Kor 5,14.

Author

Mareček, Petr

Subjects
HUMAN beings, BIBLICAL commentaries, DEVOTION, MOTIVATION (Psychology), PARTICIPATION, FATE & fatalism
Abstract

The text of 2 Cor 5:14, which is part of Paul's apologia for his apostolic ministry (2 Cor. 2:14-7:4), contains a beautiful summary of Paul's devotion and highlights the universal significance of Jesus' death. The underlying motive of his apostolic ministry is the love of Christ, which not only influences and guides his actions but also provides him with an inner impetus and motivation (5:14a). The fact that Paul is completely controlled by Christ's love is the result of his having come to a personal conviction of the significance of his death (5:14b). To express the depth and reach of Christ's love, Paul uses the concept of Jesus' substitutionary death "for the benefit of all" and links it to the idea of "corporate personality." He points to the idea of the communion of the destiny of all with Christ, which he already used in the Adam - Christ parallel in 1 Cor 15:21-22 (cf. also Rom 5:12-19). As "Adam" determined the nature and destiny of the whole human race, so does Christ. Jesus' actions and sufferings include all people (5:14c). The result of Christ's death is that "all have died" (5:14d). Paul offers no further explanation of the nature of this dying, nor does he mention how Christ's death resulted in the death of all. It is apparent, however, from 2 Cor 5:15 that people's fellowship in death with Christ also implies their participation in his life. The text of 2 Cor 5:14 wants above all to emphasize the universal significance of Christ's death. [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

7. Význam σκόλοψ τῇ σαρκί v 2 Kor 12,7b*.

Author

Mareček, Petr

Subjects
PHYSICAL diagnosis, APOSTLES, BIBLICAL commentaries, PERSECUTION, DISASTERS
Abstract

The text of 2 Cor 12:7b, which is considered one of the most famous cruces interpretum in 2 Corinthians, is one of the most enigmatic texts in the entire collection of Paul's letters. Although the expression σκόλοψ τῇ σαρκί in 2 Cor 12:7b has been the subject of much scholarly research with various proposed hypotheses, its interpretation remains unclear. It can perhaps be reckoned that this bodily suffering may have been familiar to the Corinthians and that it occurred to Paul in the context of ecstatic experiences. The Apostle Paul is not concerned with giving an accurate description of his diagnosis of his physical ailment. Whereas in Gal 4:13-15 he concentrates on highlighting the exemplary behaviour of the Galatians towards him in his illness, in 2 Cor 12 he places his physical suffering in the same line as the "insults", "hardships", "persecutions" and "calamities" that he endures for Christ, and the reference to this bodily affliction serves to emphasise that the weakness manifested in him is a sign that the power of Christ rests upon him (2 Cor 12:10). [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

10. Jak rozumět eulogii v Řím 9,5c?

Author

Mareček, Petr

Subjects
BIBLICAL commentaries, SALVATION, MESSIAH, GOD, EULOGIES, APOSTLES
Abstract

The text Rom 9:5 is referred to as crux interpretum in exegetical studies and is considered one of the most difficult exegetical passages in the Letter to the Romans. In the history of exegesis, various ways of interpreting the eulogy in Rom 9:5c have been proposed. In contemporary exegesis, the debate is primarily whether the eulogy is to be applied to Christ or to God. It has to be acknowledged that the interpretation of Rom 9:5c remains a difficult question to solve. Several points of view speak for the fact that ὸ ὤυ does not refer back to ὸ ριοτόç in Rom 9:5b but introduces a new sentence and that the eulogy accordingly is not referring to Christ, but to God (cf. Rom 1:25; 11,33-36). After enumerating the extraordinary privileges the chosen people have received from God, culminating in the gift of the Messiah (Rom 9:4b-5b), Paul pronounces a eulogy to the God who is "above all" (Rom 9:5c), trusting that he is able to provide salvation to the non-Christian members of Israel because his gifts and his calling are irrevocable (Rom 11:29). [ABSTRACT FROM AUTHOR]

Published
2022
Full Text
View/download PDF

14. Význam ἐφ᾽ ᾧ v Řím 5,12.

Author

Mareček, Petr

Subjects
TRANSLATING & interpreting, RELATIVE clauses, REFLECTION (Philosophy), BIBLICAL commentaries, TERMS & phrases
Abstract

The Letter to the Romans represents the high point of Paul's teaching and theological reflection, although it contains, as his other letters, some statements that are difficult to understand. One of the places in the Letter to the Romans which makes translation and interpretation difficult is the meaning of ἐφ᾽ ᾧ at the end of Romans 5:12. Various meanings of ἐφ᾽ ᾧ in Romans 5:12 have been proposed over the centuries and decades. In general, we can say that the different ways of interpretation can be divided into two categories based on whether the formulation ἐφ᾽ ᾧ is understood as a phrase introducing a relative clause or as the equivalent of a conjunction. The interpretation which assigns a causative value with the meaning "because, since" to the expression ἐφ᾽ ᾧ seems to be the best of all the modes of interpretation put forward. The preference for this suggestion arises from several facts. First, this meaning is well attested to in ancient sources. Furthermore, the causal meaning of the phrase is also present in principle in other places in Paul's letters where this syntagm is used (2 Cor 5:4; Phil 3:12; 4:10). Finally, it is of importance to emphasise that, above all, the nature of the whole sentence of Romans 5:12, which is characterised by a chiastic structure, requires a causal understanding. [ABSTRACT FROM AUTHOR]

Published
2021
Full Text
View/download PDF

16. Jak 2,18 a jeho interpretace.

Author

Mareček, Petr

Subjects
PRONOUNS (Grammar), BIBLICAL commentaries, FAITH, HUMANITARIAN assistance, VIOLENCE, LETTERS
Abstract

The Letter of James is the most puzzling book of the New Testament, as it contains a number of enigmatic places. One of these places is James 2:18, which has been called the crux interpretum and which is rated as one of the most difficult places in the New Testament. The exegetical explanations of James 2:18 are manifold and not one of these explanations entirely satisfies. Our verse is part of the textual unit James 2:18-20, which attempts to clarify that works, are a sign of faith. To clarify this fact, James uses arguments that are dialogical in nature. First, he introduces the topic: "Let's admit that someone would say, you have faith, and I have works." The pronouns "you" (James 2:18aβ) and "I" (James 2:18aγ) do not associate with the discussion partner or the author of James' letter, but refer to two hypothetical persons who, through dialogue, represent a typical case of separation of faith and deeds, i.e. between "having faith" (James 18aβ) and "having works" (James 2:18aγ). At this point, in accordance with the customs of the dialogue, the author of the letter intervenes in order to refute the presented statement in a clear and concise manner. In his answer, which includes two sentences joined together by a double chiasm (James 2:18bα-β), James declares that faith without works cannot be shown or proved. For the author of the letter, faith is inseparable from deeds, just as a word must be inextricably linked to a specific action that includes prompt and effective assistance to those who experience misery, unjust violence, and find themselves without protection (cf. James 1:21, 23-25,26-27). [ABSTRACT FROM AUTHOR]

Published
2020
Full Text
View/download PDF

17. Psalm 118 (117 LXX) and the Synoptic Gospels.

Author

Mareček, Petr

Subjects
*SONS, *MESSIAH
Abstract

The purpose of this paper is on the one hand to point out the importance of Psalm 118 in the setting of the Book of Psalms and its use in Judaism and on the other hand to deal with its usage in the Synoptic Gospels in connection with the presentation of the person of Jesus and his significance. The Psalm 118 (117 LXX), which is the magnificent closing psalm of the group of Ps 113-118 called 'the Hallel', that praises God for various aspects of his saving power, is the most frequently referred to psalm in the New Testament with eleven direct quotations and nine allusions. The Synoptic Gospels contain eight explicit quotations from Psalm 118 (117 LXX) including the parallels. Psalm 118 (117 LXX) is found in the context of Jesus' entry into Jerusalem, where the quotation serves to disclose Jesus's identity and status as the Messiah: Ps 118,25-26 (117 LXX) in Mark 11,9b // Matt 21,9 and Ps 118,26 (117 LXX) in Luke 19,38. Furthermore Psalm 118 is quoted in the parable of wicked tenants where Jesus is presented as a 'beloved son', who, in spite of the fact that he was rejected by the builders, i.e. killed by the chief representatives of Judaism, became a key figure in the new building of God, in a re-established Israel, through his resurrection: Ps 118,23-24 (117 LXX) in Mark 12,10-11 // Matt 21,42; Ps 118,22 (117 LXX) in Luke 20,17. Finally the quotation from Psalm 118 (117 LXX) serves to describe Jesus' coming at his Parousia as the ultimate Messiah of Israel: Ps 118,26 (117 LXX) is quoted in Matt 23,39 // Luke 13,35. It is possible to state that the eight explicit quotations of the Psalm 118 (117 LXX) in the Synoptic Gospels contribute to a better understanding of Jesus as the rejected and exalted Messiah. [ABSTRACT FROM AUTHOR]

Published
2020

18. Jan, syn Zebedeův, v Lukášově dvojdíle.

Author

Mareček, Petr

Subjects
PRIMITIVE & early church, ca. 30-600, APOSTLES, BIBLICAL commentaries, PORTRAITS
Abstract

The apostle John, the son of Zebedee and the brother of the Apostle James, is one of the six characters in the New Testament who bears the name ... "John". After John the Baptist, John Zebedee is the second most frequently mentioned bearer of this name in the New Testament. We encounter him 30 times, especially in the Synoptic Gospels and in the Acts of the Apostles. The article focuses on John Zebedee in the Lukan double work, where he appears in 7 scenes in the Gospel of Luke (5:1--11; 6:12--16; 8:40--56; 9:28--36, 49--50, 51--56; 22:7--13) and in 6 scenes in the Acts of the Apostles (1:12--14; 3:1--10, 11--26; 4:1--22; 8:14--25; 12:1--2). The detailed exegesis of these texts helps us outline the main characteristics of the portrait of John Zebedee and point out his role and importance in the Gospel of Luke and in the Acts of the Apostles. The Lukan double work clearly indicates that John Zebedee, apart from the Apostle Peter, held an important position in the early Church, which corresponds to Paul's testimony in Gal 2:9. [ABSTRACT FROM AUTHOR]

Published
2020
Full Text
View/download PDF

20. TOMÁŠ: JEHO ROLE A VÝZNAM V JANOVĚ EVANGELIU.

Author

MAREČEK, PETR

Abstract

The purpose of the paper - Thomas: His Role and Importance in the Gospel of John - is to offer an interpretation of the texts which are about Thomas, who belongs to the circle of the twelve disciples of Jesus. Thomas is mentioned in the Synoptic Gospels and in the Acts of the Apostles only in the list of Jesus' disciples (Matt 10:3; Mark 3:18; Luke 6:15; Acts 1:13). By contrast, in the Gospel of John his name, somewhat surprisingly, appears altogether seven times. We meet Thomas in four different places (John 11:16; 14:5-7; 20:24-29; 21:2) which are important in the gospel narrative. The detailed exegesis will help us to outline the main characteristics of the portrait of Thomas and to point out his role and importance in the Gospel of John. Thomas is introduced as a disciple of the circle of the Twelve, who understands Jesus entirely in earthly categories and who is able to look only with difficulty beyond his death (John 11:16; 14:5). The divine dimension of Jesus, which is unavailable to Thomas, is opened to him by the resurrected Jesus himself. Thomas, who is characterized by doubts and scepticism at an encounter with the resurrected Jesus, makes a thoroughgoing personal confession (John 20:28), the highest Christological profession in the Gospel of John. Finally, Thomas' presence in the circle of seven disciples in John 21:2, who represent the Church in missionary engagement, makes obvious that there are also those in the Church who are characterized by doubts and scepticism, who ask questions and are reluctant to believe. [ABSTRACT FROM AUTHOR]

Published
2019

21. NIKODÉM V JANOVĚ EVANGELIU.

Author

MAREČEK, PETR

Abstract

In the Gospel of John, in addition to Jesus, the protagonist and main character of the gospel narrative, there are many minor characters. Of these lesser characters, the crucial role undoubtedly belongs to Jesus' disciples. Having said that, however, there are a number of characters, who play an important role in the narrative, but who are not found in any other gospel. One such character is Nicodemus who appears three times (John 3:1-21; 7:45-52; 19:38-42). In recent decades, the figure of Nicodemus has received significant scholarly attention. Exegetes have, however, come to very different conclusions about the role and meaning of Nicodemus in the Gospel of John. For some, Nicodemus is an example of a man of insufficient faith who still does not understand Jesus, and whose act at the burial of Jesus is an expression of the misunderstanding of the meaning of Jesus' death. Others claim that Nicodemus is deliberately introduced in the Gospel of John as an ambiguous character, because the gospel provides both positive and negative signals about him. Ultimately, many are convinced that in the figure of Nicodemus one sees an example of evolution from immature to full faith. This article, adopting this lastmentioned approach, on the basis of the examination of the various texts in the Gospel of John where Nicodemus appears, points to Nicodemus as an example of a believer, whose faith gradually emerges from shadows of ambiguity to become mature and be manifested publicly. [ABSTRACT FROM AUTHOR]

Published
2018

22. CO LZE ŘÍCI O AUTOROVI JAKUBOVA LISTU.

Author

MAREČEK, PETR

Abstract

The Letter of James, which provides clear instructions for a successful life, undoubtedly belongs among the most important books of the New Testament. This New Testament book, which has for the most part been overlooked in the history of the Church, has become in recent decades the focus of researchers who have been trying to rehabilitate it. At present, including the latest literature, it can be observed that among these exegetes the question of the authorship of this letter is still very much disputed. Our study aims to discuss this issue, to become acquainted with the positions of various exegetes and to present arguments for the most likely identity of the author of the Letter of James. The study is divided into three main parts. The first part surveys those bearers of the name James who are mentioned in the New Testament. The other two parts discuss the two basic positions regarding the authorship of the Letter of James that are advocated among the scholars. The second part deals with the opinion that the author of the Letter of James is a known James from an early period of the church - James, the Lord's brother. While the third part deals with the view that the author is an unknown Hellenistic Jewish Christian. After comparing the arguments the study suggests that the Letter of James can be considered a pseudoepigraphic writing, the author of which is an educated Hellenistic Jewish Christian, who had had an extensive Greek education. [ABSTRACT FROM AUTHOR]

Published
2018

23. Učedníci putující do Emauz v Lk 24,13-35.

Author

Mareček, Petr

Subjects
APOSTLES, LEGAL testimony, BREAD, PENTECOST
Abstract

The aim of the study is to discuss the identity of the two disciples traveling to Emmaus and to point out the importance and role of these disciples in this story as well as in connection with the entirety of Luke's double work (Luke -Acts). We know the identity of one of the disciples traveling to Emmaus, Cleopas (Luke 24:18), who did not belong to the group of twelve disciples (Luke 6:14-16) and does not otherwise appear in the New Testament. The identity of the other disciple cannot be determined, although various names have been proposed for him since the Gospel of Luke was written: Simon, Nathanael, Amaon, Peter, Nicodemus, Philip, Emmaous, Luke, wife of Cleopas. The fact that the disciples are travelling in two makes it possible, on the one hand, to have a discussion that matters, and gives them the opportunity, on the other hand, to provide a reliable testimony of their experience with the resurrected Jesus. Through the testimony of a pair of disciples traveling to Emmaus, the readers of the Gospel of Luke are reminded that in reading Scripture and breaking bread, the resurrected Jesus will be truly, albeit invisibly, present. [ABSTRACT FROM AUTHOR]

Published
2019
Full Text
View/download PDF

24. Recepce Jakubova listu v dějinách církve.

Author

Mareček, Petr

Abstract

The Letter of James, although one of the last to be included in the canonical list, has gained an undisputed position in the Canon of the New Testament. Our study, which looks at the history of the reception of the Letter of James from the time of its first use and its acceptance into the New Testament canon to the present, is divided into three parts. The first presents the history of the early reception of the Letter of James and its inclusion in the canon of the New Testament. The second part discusses the attitudes towards and judgments on the Letter of James during the Reformation. Finally, the third part briefly describes what interest the Letter of James has enjoyed from the nineteenth century to the present and how it is viewed now. It is apparent from the history of the reception of the letter, which was generally overlooked in the history of the Church, that it has become the subject of attention of contemporary authors who seek to rehabilitate its position. [ABSTRACT FROM AUTHOR]

Published
2018
Full Text
View/download PDF

28. Measurement of Very Low Creep Strains: A Review.

Author

Kloc, Luboš and Mareček, Petr

Subjects
CREEP (Materials), DEFORMATIONS (Mechanics), PRESSURE, STRAINS & stresses (Mechanics), STRESS corrosion, STRESS corrosion cracking
Abstract

Various experimental techniques using mechanical springs for high strain sensitivity creep testing are described. A theory of stress and strain using these techniques is briefly summarized. Problems and advantages of the helicoid spring specimen technique are also analyzed. The helicoid spring specimen technique provides high efficiency for low-stress creep experiments in the self-loaded mode, while the external load mode allows extraordinary strain sensitivity. A new machine for conducting high-sensitivity torsion creep tests is presented together with some examples of creep curves obtained by the technique. The machine was designed to enable high sensitivity creep tests of inherently brittle materials such as intermetallics and ceramics. [ABSTRACT FROM AUTHOR]

Published
2009

29. Zajištění kvality služeb v datových sítích

Author

Koton, Jaroslav, Komosný, Dan, Mareček, Petr, Koton, Jaroslav, Komosný, Dan, and Mareček, Petr

Abstract

Tato práce se zabývá problematikou zajištění kvality služeb v datových sítích. První část práce obsahuje teoretický rozbor, kde je popsána technologie Quality of Services a její mechanismy. V závěru teoretické části jsou rozebrány jednotlivé systémy front. Druhá část práce je zaměřena na návrh a realizaci laboratorní úlohy s cílem na prokázání teoretických znalostí a vyhodnocení vhodného systému front v závislosti na poskytnutých službách., The thesis deals with the issue of ensuring the Quality of Service (QoS) in data networks. The first part is theoretical, where is described QoS technology and her mechanisms. At the end of the theoretical part, possible queuing systems are shortly presented. The second part of the thesis deals with the design and implementation of a laboratory exercise with the aim of proving theoretical knowledge and evaluating the suitability of a certain queuing system according to the provided services.

30. Výroba litých prvků vikingských zbraní raného středověku

Author

Záděra, Antonín, Mareček, Petr, Brůža, František, Záděra, Antonín, Mareček, Petr, and Brůža, František

Abstract

Práce se zabývá rešerší a následným rozborem informací a dobových technologií, potřebných pro výrobu repliky mosazného jílce meče z desátého století. Zvláště je zaměřena na dobovou slévárenskou technologii. Dále je v práci rozebrána možnost výroby repliky pomocí 3D skenu a 3D tisku. Součástí práce je také komplexní experiment, zahrnující odlití prvků jílce pomocí dobové technologie a jeho následnou kompletaci. Otestována je také funkčnost reprodukce vyrobeného jílce pomocí 3D technologií, a to do stádia vytisknutého modelu., The Bachelor’s project is concerned with the research and the following analysis of information and the period technologies needed for making a replica of the brass hilt of a 10th century sword. The project particularly focuses on the period casting technology. Next, the possibility of making a replica by a 3D scan and 3D print is discussed. The project also includes a comprehensive experiment consisting of casting parts of the hilt using the period technology. The functionality reproducing the hilt by 3D technology up to the printed model stage is also tested.

31. Manipulátor pro třídění kuliček řízený PLC

Author

Knispel, Lukáš, Matoušek, Radomil, Mareček, Petr, Knispel, Lukáš, Matoušek, Radomil, and Mareček, Petr

Abstract

Tato bakalářská práce se zabývá využitím PLC (Programmable Logic Controller) pro třídění barevných kuliček za použití snímače barev. Teoretická část popisuje princip činnosti prvků třídiče kuliček a presentuje typy programovacích jazyků. Praktická část popisuje konstrukci mechanismu vytvořenou v programu Autodesk Inventor a řešení elektronických prvků, obvodu. Na závěr seznamuje čtenáře se základy programování v jazyce ANSI C a programem Bernecker&Rainer Automation Studio., This thesis deals with using PLC (Programmable Logic Controler) for sorting colored balls using the color sensor. Theoretical part also describes principle of operation elements ball-sorting manipulator and presents the types of programming languages. Practical part describes the construction of the mechanism created in software Autodesk Inventor and solution of the electronic compoments, circuits. Finally, introduces the reader programming in ANSI C and the software Bernecker&Rainer Automation Studio.

32. Zajištění kvality služeb v datových sítích

Author

Koton, Jaroslav, Komosný, Dan, Mareček, Petr, Koton, Jaroslav, Komosný, Dan, and Mareček, Petr

Abstract

Tato práce se zabývá problematikou zajištění kvality služeb v datových sítích. První část práce obsahuje teoretický rozbor, kde je popsána technologie Quality of Services a její mechanismy. V závěru teoretické části jsou rozebrány jednotlivé systémy front. Druhá část práce je zaměřena na návrh a realizaci laboratorní úlohy s cílem na prokázání teoretických znalostí a vyhodnocení vhodného systému front v závislosti na poskytnutých službách., The thesis deals with the issue of ensuring the Quality of Service (QoS) in data networks. The first part is theoretical, where is described QoS technology and her mechanisms. At the end of the theoretical part, possible queuing systems are shortly presented. The second part of the thesis deals with the design and implementation of a laboratory exercise with the aim of proving theoretical knowledge and evaluating the suitability of a certain queuing system according to the provided services.

33. Doporučení optimálního mířicího bodu při střelbě na terč

Author

Mangová, Marie, Rajmic, Pavel, Mareček, Petr, Mangová, Marie, Rajmic, Pavel, and Mareček, Petr

Abstract

Tato práce se zabývá doporučením optimálního bodu při střelbě na terč. První část práce obsahuje teoretický rozbor, kde je popsána problematika pravděpodobnosti, rozdělení náhodných veličin a jejich významná rozdělení. V závěru teoretické části je rozebrána Fourierova transformace. Druhá část práce je zaměřena na návrh a implementaci webové aplikace. V rámci návrhu a implementace webové aplikace je využita znalost teorie pro určení optimálního bodu terče., The thesis deals with recommendation optimal point of dartboard. The first part is theoretical, where is described issue of probability, distribution of variation and significant distribution of variation. At the end of theoretical part is described the Fourier transfrom. The second part of the thesis deals with the design and implementation of web application. The design and implemention of web application uses the theoretical part for assigment optimal point of dartboard.

34. Výroba litých prvků vikingských zbraní raného středověku

Author

Záděra, Antonín, Mareček, Petr, Brůža, František, Záděra, Antonín, Mareček, Petr, and Brůža, František

Abstract

Práce se zabývá rešerší a následným rozborem informací a dobových technologií, potřebných pro výrobu repliky mosazného jílce meče z desátého století. Zvláště je zaměřena na dobovou slévárenskou technologii. Dále je v práci rozebrána možnost výroby repliky pomocí 3D skenu a 3D tisku. Součástí práce je také komplexní experiment, zahrnující odlití prvků jílce pomocí dobové technologie a jeho následnou kompletaci. Otestována je také funkčnost reprodukce vyrobeného jílce pomocí 3D technologií, a to do stádia vytisknutého modelu., The Bachelor’s project is concerned with the research and the following analysis of information and the period technologies needed for making a replica of the brass hilt of a 10th century sword. The project particularly focuses on the period casting technology. Next, the possibility of making a replica by a 3D scan and 3D print is discussed. The project also includes a comprehensive experiment consisting of casting parts of the hilt using the period technology. The functionality reproducing the hilt by 3D technology up to the printed model stage is also tested.

35. Doporučení optimálního mířicího bodu při střelbě na terč

Author

Mangová, Marie, Rajmic, Pavel, Mareček, Petr, Mangová, Marie, Rajmic, Pavel, and Mareček, Petr

Abstract

Tato práce se zabývá doporučením optimálního bodu při střelbě na terč. První část práce obsahuje teoretický rozbor, kde je popsána problematika pravděpodobnosti, rozdělení náhodných veličin a jejich významná rozdělení. V závěru teoretické části je rozebrána Fourierova transformace. Druhá část práce je zaměřena na návrh a implementaci webové aplikace. V rámci návrhu a implementace webové aplikace je využita znalost teorie pro určení optimálního bodu terče., The thesis deals with recommendation optimal point of dartboard. The first part is theoretical, where is described issue of probability, distribution of variation and significant distribution of variation. At the end of theoretical part is described the Fourier transfrom. The second part of the thesis deals with the design and implementation of web application. The design and implemention of web application uses the theoretical part for assigment optimal point of dartboard.

36. Robotický stolní fotbal

Author

Lang, Stanislav, Matoušek, Radomil, Mareček, Petr, Lang, Stanislav, Matoušek, Radomil, and Mareček, Petr

Abstract

Cílem této diplomové práce je návrh robotického fotbalu s realizací konstrukce a řízení jedné osy stolního fotbalu. V úvodu jsou popsána dosud vyvinutá řešení. Další kapitoly popisují výběr hracího stolu a specifikaci lineárního, rotačního motoru. Jsou zde uvedeny konstrukční vize s umístěním zvolených komponent spolu s návrhem umístění senzorického systému pro detekci míčku. V závěru konstrukční části je specifikace a řešení umístění bezpečnostních prvků. Programovací část práce zahrnuje implementaci komunikačního rozhraní pro použití dat z řídícího algoritmu robotického fotbalu., The aim of this diploma thesis is the design of robotic table football with the realization of the construction and control a single axis of table football. In introduction are described previously developed solutions. Next chapters contain a selection of specific gaming table and specification of linear, rotary motor. There are presented design visions with the placement of selected component together with proposal location of sensor system for ball detection. In the end of design section is specification and solution of placement safety features. The programming part of the thesis involves the implementation of a communication interface for data processing from the control algorithm of robotic table football.

37. Výroba litých prvků vikingských zbraní raného středověku

Author

Záděra, Antonín, Mareček, Petr, Záděra, Antonín, and Mareček, Petr

Abstract

Práce se zabývá rešerší a následným rozborem informací a dobových technologií, potřebných pro výrobu repliky mosazného jílce meče z desátého století. Zvláště je zaměřena na dobovou slévárenskou technologii. Dále je v práci rozebrána možnost výroby repliky pomocí 3D skenu a 3D tisku. Součástí práce je také komplexní experiment, zahrnující odlití prvků jílce pomocí dobové technologie a jeho následnou kompletaci. Otestována je také funkčnost reprodukce vyrobeného jílce pomocí 3D technologií, a to do stádia vytisknutého modelu., The Bachelor’s project is concerned with the research and the following analysis of information and the period technologies needed for making a replica of the brass hilt of a 10th century sword. The project particularly focuses on the period casting technology. Next, the possibility of making a replica by a 3D scan and 3D print is discussed. The project also includes a comprehensive experiment consisting of casting parts of the hilt using the period technology. The functionality reproducing the hilt by 3D technology up to the printed model stage is also tested.

38. Výroba litých prvků vikingských zbraní raného středověku

Author

Záděra, Antonín, Mareček, Petr, Záděra, Antonín, and Mareček, Petr

Abstract

Práce se zabývá rešerší a následným rozborem informací a dobových technologií, potřebných pro výrobu repliky mosazného jílce meče z desátého století. Zvláště je zaměřena na dobovou slévárenskou technologii. Dále je v práci rozebrána možnost výroby repliky pomocí 3D skenu a 3D tisku. Součástí práce je také komplexní experiment, zahrnující odlití prvků jílce pomocí dobové technologie a jeho následnou kompletaci. Otestována je také funkčnost reprodukce vyrobeného jílce pomocí 3D technologií, a to do stádia vytisknutého modelu., The Bachelor’s project is concerned with the research and the following analysis of information and the period technologies needed for making a replica of the brass hilt of a 10th century sword. The project particularly focuses on the period casting technology. Next, the possibility of making a replica by a 3D scan and 3D print is discussed. The project also includes a comprehensive experiment consisting of casting parts of the hilt using the period technology. The functionality reproducing the hilt by 3D technology up to the printed model stage is also tested.

39. Výroba litých prvků vikingských zbraní raného středověku

Author

Záděra, Antonín, Mareček, Petr, Záděra, Antonín, and Mareček, Petr

Abstract

Práce se zabývá rešerší a následným rozborem informací a dobových technologií, potřebných pro výrobu repliky mosazného jílce meče z desátého století. Zvláště je zaměřena na dobovou slévárenskou technologii. Dále je v práci rozebrána možnost výroby repliky pomocí 3D skenu a 3D tisku. Součástí práce je také komplexní experiment, zahrnující odlití prvků jílce pomocí dobové technologie a jeho následnou kompletaci. Otestována je také funkčnost reprodukce vyrobeného jílce pomocí 3D technologií, a to do stádia vytisknutého modelu., The Bachelor’s project is concerned with the research and the following analysis of information and the period technologies needed for making a replica of the brass hilt of a 10th century sword. The project particularly focuses on the period casting technology. Next, the possibility of making a replica by a 3D scan and 3D print is discussed. The project also includes a comprehensive experiment consisting of casting parts of the hilt using the period technology. The functionality reproducing the hilt by 3D technology up to the printed model stage is also tested.

40. Zajištění kvality služeb v datových sítích

Author

Koton, Jaroslav, Komosný, Dan, Mareček, Petr, Koton, Jaroslav, Komosný, Dan, and Mareček, Petr

Abstract

Tato práce se zabývá problematikou zajištění kvality služeb v datových sítích. První část práce obsahuje teoretický rozbor, kde je popsána technologie Quality of Services a její mechanismy. V závěru teoretické části jsou rozebrány jednotlivé systémy front. Druhá část práce je zaměřena na návrh a realizaci laboratorní úlohy s cílem na prokázání teoretických znalostí a vyhodnocení vhodného systému front v závislosti na poskytnutých službách., The thesis deals with the issue of ensuring the Quality of Service (QoS) in data networks. The first part is theoretical, where is described QoS technology and her mechanisms. At the end of the theoretical part, possible queuing systems are shortly presented. The second part of the thesis deals with the design and implementation of a laboratory exercise with the aim of proving theoretical knowledge and evaluating the suitability of a certain queuing system according to the provided services.

41. Zajištění kvality služeb v datových sítích

Author

Koton, Jaroslav, Komosný, Dan, Mareček, Petr, Koton, Jaroslav, Komosný, Dan, and Mareček, Petr

Abstract

Tato práce se zabývá problematikou zajištění kvality služeb v datových sítích. První část práce obsahuje teoretický rozbor, kde je popsána technologie Quality of Services a její mechanismy. V závěru teoretické části jsou rozebrány jednotlivé systémy front. Druhá část práce je zaměřena na návrh a realizaci laboratorní úlohy s cílem na prokázání teoretických znalostí a vyhodnocení vhodného systému front v závislosti na poskytnutých službách., The thesis deals with the issue of ensuring the Quality of Service (QoS) in data networks. The first part is theoretical, where is described QoS technology and her mechanisms. At the end of the theoretical part, possible queuing systems are shortly presented. The second part of the thesis deals with the design and implementation of a laboratory exercise with the aim of proving theoretical knowledge and evaluating the suitability of a certain queuing system according to the provided services.

42. Robotický stolní fotbal

Author

Lang, Stanislav, Matoušek, Radomil, Mareček, Petr, Lang, Stanislav, Matoušek, Radomil, and Mareček, Petr

Abstract

Cílem této diplomové práce je návrh robotického fotbalu s realizací konstrukce a řízení jedné osy stolního fotbalu. V úvodu jsou popsána dosud vyvinutá řešení. Další kapitoly popisují výběr hracího stolu a specifikaci lineárního, rotačního motoru. Jsou zde uvedeny konstrukční vize s umístěním zvolených komponent spolu s návrhem umístění senzorického systému pro detekci míčku. V závěru konstrukční části je specifikace a řešení umístění bezpečnostních prvků. Programovací část práce zahrnuje implementaci komunikačního rozhraní pro použití dat z řídícího algoritmu robotického fotbalu., The aim of this diploma thesis is the design of robotic table football with the realization of the construction and control a single axis of table football. In introduction are described previously developed solutions. Next chapters contain a selection of specific gaming table and specification of linear, rotary motor. There are presented design visions with the placement of selected component together with proposal location of sensor system for ball detection. In the end of design section is specification and solution of placement safety features. The programming part of the thesis involves the implementation of a communication interface for data processing from the control algorithm of robotic table football.

43. Robotický stolní fotbal

Author

Lang, Stanislav, Matoušek, Radomil, Mareček, Petr, Lang, Stanislav, Matoušek, Radomil, and Mareček, Petr

Abstract

Cílem této diplomové práce je návrh robotického fotbalu s realizací konstrukce a řízení jedné osy stolního fotbalu. V úvodu jsou popsána dosud vyvinutá řešení. Další kapitoly popisují výběr hracího stolu a specifikaci lineárního, rotačního motoru. Jsou zde uvedeny konstrukční vize s umístěním zvolených komponent spolu s návrhem umístění senzorického systému pro detekci míčku. V závěru konstrukční části je specifikace a řešení umístění bezpečnostních prvků. Programovací část práce zahrnuje implementaci komunikačního rozhraní pro použití dat z řídícího algoritmu robotického fotbalu., The aim of this diploma thesis is the design of robotic table football with the realization of the construction and control a single axis of table football. In introduction are described previously developed solutions. Next chapters contain a selection of specific gaming table and specification of linear, rotary motor. There are presented design visions with the placement of selected component together with proposal location of sensor system for ball detection. In the end of design section is specification and solution of placement safety features. The programming part of the thesis involves the implementation of a communication interface for data processing from the control algorithm of robotic table football.

44. Doporučení optimálního mířicího bodu při střelbě na terč

Author

Mangová, Marie, Rajmic, Pavel, Mareček, Petr, Mangová, Marie, Rajmic, Pavel, and Mareček, Petr

Abstract

Tato práce se zabývá doporučením optimálního bodu při střelbě na terč. První část práce obsahuje teoretický rozbor, kde je popsána problematika pravděpodobnosti, rozdělení náhodných veličin a jejich významná rozdělení. V závěru teoretické části je rozebrána Fourierova transformace. Druhá část práce je zaměřena na návrh a implementaci webové aplikace. V rámci návrhu a implementace webové aplikace je využita znalost teorie pro určení optimálního bodu terče., The thesis deals with recommendation optimal point of dartboard. The first part is theoretical, where is described issue of probability, distribution of variation and significant distribution of variation. At the end of theoretical part is described the Fourier transfrom. The second part of the thesis deals with the design and implementation of web application. The design and implemention of web application uses the theoretical part for assigment optimal point of dartboard.

45. Manipulátor pro třídění kuliček řízený PLC

Author

Knispel, Lukáš, Matoušek, Radomil, Mareček, Petr, Knispel, Lukáš, Matoušek, Radomil, and Mareček, Petr

Abstract

Tato bakalářská práce se zabývá využitím PLC (Programmable Logic Controller) pro třídění barevných kuliček za použití snímače barev. Teoretická část popisuje princip činnosti prvků třídiče kuliček a presentuje typy programovacích jazyků. Praktická část popisuje konstrukci mechanismu vytvořenou v programu Autodesk Inventor a řešení elektronických prvků, obvodu. Na závěr seznamuje čtenáře se základy programování v jazyce ANSI C a programem Bernecker&Rainer Automation Studio., This thesis deals with using PLC (Programmable Logic Controler) for sorting colored balls using the color sensor. Theoretical part also describes principle of operation elements ball-sorting manipulator and presents the types of programming languages. Practical part describes the construction of the mechanism created in software Autodesk Inventor and solution of the electronic compoments, circuits. Finally, introduces the reader programming in ANSI C and the software Bernecker&Rainer Automation Studio.

46. Výroba litých prvků vikingských zbraní raného středověku

Author

Záděra, Antonín, Mareček, Petr, Brůža, František, Záděra, Antonín, Mareček, Petr, and Brůža, František

Abstract

Práce se zabývá rešerší a následným rozborem informací a dobových technologií, potřebných pro výrobu repliky mosazného jílce meče z desátého století. Zvláště je zaměřena na dobovou slévárenskou technologii. Dále je v práci rozebrána možnost výroby repliky pomocí 3D skenu a 3D tisku. Součástí práce je také komplexní experiment, zahrnující odlití prvků jílce pomocí dobové technologie a jeho následnou kompletaci. Otestována je také funkčnost reprodukce vyrobeného jílce pomocí 3D technologií, a to do stádia vytisknutého modelu., The Bachelor’s project is concerned with the research and the following analysis of information and the period technologies needed for making a replica of the brass hilt of a 10th century sword. The project particularly focuses on the period casting technology. Next, the possibility of making a replica by a 3D scan and 3D print is discussed. The project also includes a comprehensive experiment consisting of casting parts of the hilt using the period technology. The functionality reproducing the hilt by 3D technology up to the printed model stage is also tested.

47. General public awareness of organ donation

Author

Marečková, Bohdana, Mareček, Petr, Schneiderová, Michaela, and Měřička, Pavel

Abstract

This work consists of the theoretical and the practical part. Historical aspects of human organ transplants are mentioned in the theoretical part. Management of organ harvesting and transplantation with relevant legislative issuees are described and full list of the transplant centers in the Czech republic is addend. Extensive ethical aspects of human organ transplants and religion attitude to organ donation are mentioned. Brain death is defined and described from the patophysiological point of view. In practical part, my work presents a general public opinion and awareness of human transplants and organ donations. In studied population, my work tried to find out a relationship between the educational level of the respondents and thein opinion and awareness of human transplants. In conclussion, some suggestions how to improve a general public education are mentioned.

Published
2009

48. The Son of David in Mathew's Gospel in the Light of the Solomon as Excorcist Tradition

Author

Dvořáček, Jiří, Mrázek, Jiří, Luz, Ulrich, and Mareček, Petr

Abstract

The dissertation focuses on usage of the Son od David title in Matthew's Gospel. The thesis is based on the presumption that the image of the healing Son of David, as presented by Matthew, is not simply a result of Matthew's redaction of Mark 10,46-52 but is explicable against the background of contemporary Jewish concepts - in praticular in the light of the Solomon as exorcist tradition. Powered by TCPDF (www.tcpdf.org)

Published
2008

Catalog

Books, media, physical & digital resources
See catalog results