Search

Graphical Abstract

This in vitro study aimed to analyze the surface roughness (Ra) and color stability (ΔEab, ΔE00) following simulated mechanical brushing and to evaluate the microtensile (μTBS) of self-adhering resin flowable (SARF) to dentin. The selected materials were Constic, Yflow AS, and Tetric N flow (TNF/control). Thirty composite resin cylinders were fabricated for surface property evaluation. Ra and color were assessed both before and after simulated brushing. The thresholds of 50:50% perceptibility and acceptability of color differences in the evaluated resins were assessed. For μTBS analysis, fifteen molars were selected, sectioned to expose flat dentin surfaces, and restored according to the manufacturers’ instructions for microtensile testing. There were statistically significant differences in Ra among the groups, with Constic exhibiting the highest Ra value (0.702 µm; p < 0.05), whereas Yflow AS presented the lowest Ra value (0.184 µm). No statistically significant difference in color was observed among the groups (p > 0.05). The 50:50% perceptibility and acceptability thresholds were set at 1.2 and 2.7 for ΔEab and 0.8 and 1.8 for ΔE 00. All the results fell within the acceptable limits. The mean μTBS values of Constic, Yflow AS, and TNF were 10.649 MPa, 8.170 MPa, and 33.669 MPa, respectively. This study revealed increased Ra and comparable color stability among all the tested composite resins after abrasion. However, the SARF exhibited lower μTBS compared to conventional using an adhesive system.

The objective was to compare the color match and color stability behavior of single- and multi-shade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in five databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADEpro tool. Four studies were selected, with 263 restorations analyzed. The results showed comparable performance between single-shade RBCs and multi-shade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multi-shade RBCs over 12 months.

Background: This study investigated effects of rapid high-intensity light-curing (3 s) on increasing transdentinal temperature and cell viability. Methods: A total of 40 dentin discs (0.5 mm) obtained from human molars were prepared, included in artificial pulp chambers (4.5 × 5 mm), and subjected to four light-curing protocols (n = 5), with a Valo Grand light curing unit: (i) 10 s protocol with a moderate intensity of 1000 mW/cm2 (Valo-10 s); (ii) 3 s protocol with a high intensity of 3200 mW/cm2 (Valo-3 s); (iii) adhesive system + Filtek Bulk-Fill Flow bulk-fill composite resin in 10 s (FBF-10 s); (iv) adhesive system + Tetric PowerFlow bulk-fill composite resin in 3 s (TPF-3 s). Transdentinal temperature changes were recorded with a type K thermocouple. Cell viability was assessed using the MTT assay. Data were analyzed using one-way ANOVA and Tukey tests for comparison between experimental groups (p < 0.05). Results: The 3 s high-intensity light-curing protocol generated a higher temperature than the 10 s moderate-intensity standard (p < 0.001). The Valo-10 s and Valo-3 s groups demonstrated greater cell viability than the FBF-10s and TPF-3 s groups and statistical differences were observed between the Valo-3 s and FBF-10 s groups (p = 0.023) and Valo-3 s and TPF-3 s (p = 0.025), with a potential cytotoxic effect for the FBF-10 s and TPF-3 s groups. Conclusions: The 3 s rapid high-intensity light-curing protocol of bulk-fill composite resins caused a temperature increase greater than 10 s and showed cell viability similar to and comparable to the standard protocol.

Abstract Polymethyl methacrylate (PMMA) has been considered a suitable material for cranioplasty. However, no consensus has been reached concerning the best material for cranioplasty with regard to minimizing complications. Thus, this systematic review and meta-analysis aimed to compare the complication rates of PMMA with those of autologous bone and titanium mesh. This review was registered with PROSPERO (CRD42016042725). Systematic searches were conducted on PubMed/MEDLINE, Scopus, and Web of Science. The focus question was, “Do PMMA prostheses used in cranioplasty have complications rates similar to those of autologous bone and titanium mesh?” A meta-analysis of complication rates was performed on the basis of dichotomous outcomes assessed by risk ratio (RR) with corresponding 95% confidence intervals (CI). From 1014 data sources, 11 articles were selected according to eligibility criteria. These articles involved 1,256 individuals and 1,278 cranioplasties using autologous bone (n = 408), PMMA (n = 379), or titanium (n = 151). The follow-up period ranged from 63 days to 54.3 months. No difference was observed between the complication rates of PMMA and autologous bone (p = 0.94; RR, 0.98; 95%CI, 0.54–1.75) or between PMMA and titanium (p = 0.38; RR, 1.59; 95%CI, 0.57–4.48). Sub-analysis of the reasons for craniotomy (trauma/non-trauma) was conducted, which revealed no significant difference (p = 0.91; RR, 0.95; 95%CI, 0.37–2.42). The meta-analysis indicated that the use of PMMA yields complication rates that are near those of autologous bone and titanium mesh.

We evaluated the influence of photoactivation method and hydrophobic resin (HR) application on the marginal and internal adaptation, hardness (KHN), and crosslink density (CLD) of a resin-based fissure sealant. Model fissures were created in bovine enamel fragments (n = 10) and sealed using one of the following protocols: no adhesive system + photoactivation of the sealant using continuous light (CL), no adhesive system + photoactivation of the sealant using the soft-start method (SS), HR + CL, or HR + SS. Marginal and internal gaps and KHN were assessed after storage in water for 24 h. The CLD was indirectly assessed by repeating the KHN measurement after 24 h of immersion in 100% ethanol. There was no difference among the samples with regard to marginal or internal adaptation. The KHN and CLD were similar for samples cured using either photoactivation method. Use of a hydrophobic resin prior to placement of fissure sealants and curing the sealant using the soft-start method may not provide any positive influence on integrity or crosslink density.

Introduction. Universal single-shade composite resins are characterized by a property that enables the creation of restorations that mimic tooth structure to the extent possible with fewer shades of color. Objectives. This study aimed to instrumentally and visually evaluate the color correspondence of two single-shade composite resins in extracted human teeth multishade composite resins. Methods. Upper central incisors and upper and/or lower molars with intact buccal surfaces were selected. The study consisted of a control group (n = 20): Z250 XT (3M ESPE) (G1) multishade composite resin in colors A1 to A4, and a test group (n = 20) divided further into two equal groups, consisting of single-shade composite resin Omnichroma (Tokuyama Dental) (G2) and single-shade composite resin Vittra APS Unique from (FGM) (G3). Instrumental evaluation was performed using a spectrophotometer, and visual evaluation was performed by three observers. Descriptive measurements related to the differences in color obtained through instrumental means were analyzed using mean and standard deviation, wherein the means were compared using ANOVA, applying the Bonferroni post hoc test. Results. A statistically significant difference was observed among the groups (G1, G2, and G3) (ANOVA: p

Este trabalho teve como objetivo realizar uma revisão de literatura sobre o tratamento da hipersensibilidade dentinária com agentes dessensibilizantes a base de Nitrato de potássio. Foi realizado levantamento bibliográfico do período de 2003 a 2019 nas bases de dados PubMed e Scielo. Foram utilizadas as palavras chaves em português “Desmineralização” “Hipersensibilidade da Dentina” e “Nitrato de Potássio” e as correspondentes em inglês, “Demineralization” “Dentin Sensitivity” e “Potassium Nitrate”. A literatura apontou que o nitrato de potássio atua aumentando a concentração de íons potássio na extremidade interna dos túbulos dentinários em nível suficiente para inativar às terminações nervosas da polpa. Isto provocou a despolarização das fibras nervosas, apresentando ação mais rápida e duradoura quando comparado a outros agentes dessensibilizantes. Dentifrícios a base de KNO3 sozinho ou combinados com outros componentes mostraram-se capazes de tratar de maneira eficaz a hipersensibilidade dentinária. As formas de incorporação do nitrato de potássio mais frequentes são através de dentrifícios e colutórios bucais onde a posologia que mais apresentou resultados satisfatórios para o uso dos mesmos no tratamento da hipersensibilidade dentinária foi a associação da escovação e enxágue, respectivamente, duas vezes ao dia durante dois minutos. Todos os agentes dessensibilizantes a base de nitrato de potássio analisados no presente estudo foram capazes de tratar de maneira eficaz a hipersensibilidade dentinária.

Objective: The aim of the present study was to compare the effect of pre-treating dentin with chlorhexidine, at concentrations of 0.2% and 2%, and remineralizing paste containing CPP-ACP (MI Paste – GC) on the bond strength of adhesive systems. Material and methods: In total, 80 slides of dentin were used. These slides were 2 mm thick and were obtained from bovine incisors. Standard cavities were created using diamond bur number 3131. In the control groups, a Scotchbond Universal Adhesive (SUA) self-etching adhesive system of 3M ESPE and a Clearfil SE Bond (CSE) adhesive system of Kuraray were applied, following the manufacturer’s instructions. In the other groups, dentin was pretreated with chlorhexidine (0.2% and 2%) for 1 min and with MI Paste for 3 min. The cavities were restored with Z350 XT resin (3M ESPE). After 24 h of storage, the push-out test was applied at a speed of 0.5 mm/min. Results: The different dentin pretreatment techniques did not affect the intra-adhesive bond strength. There was a difference between treatment with MI Paste and chlorhexidine 0.2% in favor of the SUA, with values of 15.22 and 20.25 Mpa, respectively. Conclusions: The different pretreatment methods did not alter the immediate bond strength to dentin. Differences were only recorded when comparing the adhesives.

The aim of this study was to evaluate the radiopacity of four commercially available low-viscosity composites. The lowviscosity composites used in this study were Natural Flow, Flow It, Filtek Flow and Protect Liner F. Five specimens of each material were made in stainless-steel ring moulds of 10 mm diameter and 2 mm height. One specimen of each material and a 10-step aluminium wedge were radiographed in an occlusal film. The reading of the optical density was performed in five different locations in each radiographed specimen. The net optical density was calculated, and then the mean values were obtained, and related with the equivalent thickness of aluminium. The radiopacities of each composite, in millimeters of aluminium were: Flow It (3.24 ± 0.17); Filtek Flow (2.25 ± 0.17); Natural Flow (1.50 ± 0.13); Protect Liner F (

Aim: The aim of this article is to evaluate clinical trials with nanoparticle composite in posterior teeth through a systematic review of the literature. Methods: This analysis includes controlled clinical trials with nanoparticle composites, with at least 6 months of evaluation, published in the English language between 1997 and 2009. In vitro and retrospective studies and studies on anterior teeth were excluded. Articles were retrieved from the following full-text electronic journal databases: MEDLINE, LILACS and The Cochrane Library. Results: The largest number of articles was found in the MEDLINE database, but only 4 of them met the inclusion and exclusion criteria. No articles were found in the LILACS database; only two articles were selected from The Cochrane Library databases and they coincided with those already included in MEDLINE. Conclusions: The nanoparticle composites give a satisfactory performance for use in posterior teeth for at least 2 years of functional activity, but their performance was not superior to that of the other composites. Long-term studies must be conducted to evaluate the performance after 2 years of functional activity. New controlled and randomized clinical trials are necessary.

Linear polymerization shrinkage (LPS), flexural strength (FS) and modulus of elasticity (ME) of low-viscosity resin composites (Admira Flow™, Grandio Flow™/VOCO; Filtek Z350 Flow™/3M ESPE; Tetric Flow™/Ivoclar-Vivadent) was evaluated using a well-established conventional micro-hybrid composite as a standard (Filtek Z250™/3M ESPE). For the measurement of LPS, composites were applied to a cylindrical metallic mould and polymerized (n = 8). The gap formed at the resin/mould interface was observed using SEM (1500×). For FS and ME, specimens were prepared according to the ISO 4049 specifications (n = 10). Statistical analysis of the data was performed with one-way ANOVA and the Tukey test. The conventional resin presented significantly lower LPS associated with high FS and ME, but only the ME values of the conventional resin differed significantly from the low-viscosity composites. The relationship between ME and LPS of low-viscosity resin composites when used as restorative material is a critical factor in contraction stress relief and marginal leakage.

This study investigated the alteration of surface roughness of the nanofill composite Filtek Z350 3M/ESPE®, caused by simulated brushing associated with the use of mouthrinses with or without alcohol. Sixty specimens were prepared and distributed into six groups: distilled water, ethylic alcohol, Listerine® Vanilla Mint, Plax® without alcohol, Oral B® without alcohol and a control group. Each group was submitted to two intercalary 5,000 simulated brushing cycles. At the end of each cycle, the specimens were washed in tap water and immersed for two cycles of six hours equivalent to one year of daily use of the solution for 2 minutes. It was possible to verify significant alteration in surface roughness of the composite influenced by ethylic alcohol. It was not significant for distilled water and the mouthrinses.

Linear polymerization shrinkage (LPS), flexural strength (FS) and modulus of elasticity (ME) of 7 dental composites (Filtek Z350™, Filtek Z250™/3M ESPE; Grandio™, Polofil Supra™/VOCO; TPH Spectrum™, TPH3™, Esthet-X™/Denstply) were measured. For the measurement of LPS, composites were applied to a cylindrical metallic mold and polymerized (n = 8). The gap formed at the resin/mold interface was observed using scanning electron microscopy (1500×). For FS and ME, specimens were prepared according to the ISO 4049 specifications (n = 10). Statistical analysis of the data was performed with one-way ANOVA and the Tukey test. TPH Spectrum presented significantly higher LPS values (29.45 µm). Grandio had significantly higher mean values for FS (141.07 MPa) and ME (13.91 GPa). The relationship between modulus of elasticity and polymerization shrinkage is the main challenge for maintenance of the adhesive interface, thus composites presenting high shrinkage values, associated with a high modulus of elasticity tend to disrupt the adhesive interface under polymerization.

Dentistry is renewed day after day through the results of qualified researches. The approach as regards carious dentin removal is goingthrough questioning and innovation. The scope of this study was to perform a literature review in the sense of elucidating questions pertaining to the problem of whether or not it is necessary to completely remove carious dentin, and the possibility of performing restoration in a single session, in addition to a discussion about which type of material should be applied in this type of substrate. After analyzing the referenced articles, it was concluded that the stepwise treatment controls caries progression; there is a trend in the literature to partially remove the carious dentin in deep lesions and perform definitive restoration; Calcium hydroxide cement is a classical liner in these situations, while glass ionomer cement and resinous materials are other possibilities of materials that can be in close contact with the remaining dentin.