Search

A conventional optical cavity supports modes which are confined because they are unable to leak out of the cavity. Bound state in continuum (BIC) cavities are an unconventional alternative, where light can leak out, but is confined by multimodal destructive interference. BICs are a general wave phenomenon, of particular interest to optics, but BICs and multimodal interference have never been demonstrated at the nanoscale. Here, we demonstrate the first nanophotonic cavities based on BIC-like multimodal interference. This novel confinement mechanism for deep sub-wavelength light shows orders of magnitude improvement in several confinement metrics. Specifically, we obtain cavity volumes below 100x100x3nm^3 with quality factors about 100, with extreme cases having 23x23x3nm^3 volumes or quality factors above 400. Key to our approach, is the use of pristine crystalline hyperbolic dispersion media (HyM) which can support large momentum excitations with relatively low losses. Making a HyM cavity is complicated by the additional modes that appear in a HyM. Ordinarily, these serve as additional channels for leakage, reducing cavity performance. But, in our experiments, we find a BIC-like cavity confinement enhancement effect, which is intimately related to the ray-like nature of HyM excitations. In fact, the quality factors of our cavities exceed the maximum that is possible in the absence of higher order modes. The alliance of HyM with BICs in our work yields a radically novel way to confine light and is expected to have far reaching consequences wherever strong optical confinement is utilized, from ultra-strong light-matter interactions, to mid-IR nonlinear optics and a range of sensing applications.

Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour deposition (CVD) of single layer graphene (SLG) matrices comprising up to ~12000 individual single crystals (SCs), grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ~80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ~5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ~0.25, 0.45, 0.75, 1 dB V-1 for device lengths ~30, 60, 90, 120 {\mu}m. The data rate is up to 20 Gbps. Encapsulation with single-layer hBN is used to protected SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. Our full process flow (from growth to device fabrication) enables the commercial implementation of graphene-based photonic devices., Comment: 30 pages, 9 Figures

We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 ${\mu}$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices., Comment: 15 pages, 11 figures. Published under ACS AuthorChoice license

We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-quality scalable graphene and low contact resistance. By demonstrating this high-speed CVD graphene EAM modulator integrated on Si photonics and the scalable approach, we are confident that graphene can satisfy the main requirements to be a competitive technology for photonics.