Search

Abstract In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real time for scintillation in FSO links. The optical front-end of the receiver is entirely integrated in a silicon photonic chip hosting a 2D Optical Antenna Array and a self-adaptive analog Programmable Optical Processor made of a mesh of tunable Mach–Zehnder interferometers. The photonic chip acts as an adaptive interface to couple turbulent FSO beams to single-mode guided optics, enabling energy and cost-effective operation, scalability to systems with a larger number of apertures, modulation-format and data-protocol transparency, and pluggability with commercial fiber optics transceivers. Experimental results demonstrate the effectiveness of the proposed receiver with optical signals at a data rate of 10 Gbit/s transmitted in indoor FSO links where different turbulent conditions, even stronger than those expected in outdoor links of hundreds of meters, are reproduced.

Implantable cell replacement therapies promise to completely restore the function of neural structures, possibly changing how we currently perceive the onset of neurodegenerative diseases. One of the major clinical hurdles for the routine implementation of stem cell therapies is poor cell retention and survival, demanding the need to better understand these mechanisms while providing precise and scalable approaches to monitor these cell-based therapies in both pre-clinical and clinical scenarios. This poses significant multidisciplinary challenges regarding planning, defining the methodology and requirements, prototyping and different stages of testing. Aiming toward an optogenetic neural stem cell implant controlled by a smart wireless electronic frontend, we show how an iterative development methodology coupled with a modular design philosophy can mitigate some of these challenges. In this study, we present a miniaturized, wireless-controlled, modular multisensor platform with fully interfaced electronics featuring three different modules: an impedance analyzer, a potentiostat and an optical stimulator. We show the application of the platform for electrical impedance spectroscopy-based cell monitoring, optical stimulation to induce dopamine release from optogenetically modified neurons and a potentiostat for cyclic voltammetry and amperometric detection of dopamine release. The multisensor platform is designed to be used as an opto-electric headstage for future in vivo animal experiments.

Reconfigurable wavelength-selective devices are essential components of flexible optical networks. Here the authors show a silicon-photonic add-drop multiplexer meeting the strict requirements of telecom systems in terms of broadband operation range, hitless tunability and polarization transparency.

Spontaneous Raman microscopy reveals the chemical composition of a sample in a label-free and non-invasive fashion by directly measuring the vibrational spectra of molecules. However, its extremely low cross section prevents its application to fast imaging. Stimulated Raman scattering (SRS) amplifies the signal by several orders of magnitude thanks to the coherent nature of the nonlinear process, thus unlocking high-speed microscopy applications that provide analytical information to elucidate biochemical mechanisms with subcellular resolution. Nevertheless, in its standard implementation, narrowband SRS provides images at only one frequency at a time, which is not sufficient to distinguish constituents with overlapping Raman bands. Here, we report a broadband SRS microscope equipped with a home-built multichannel lock-in amplifier simultaneously measuring the SRS signal at 32 frequencies with integration time down to 44 µs, allowing for detailed, high spatial resolution mapping of spectrally congested samples. We demonstrate the capability of our microscope to differentiate the chemical constituents of heterogeneous samples by measuring the relative concentrations of different fatty acids in cultured hepatocytes at the single lipid droplet level and by differentiating tumor from peritumoral tissue in a preclinical mouse model of fibrosarcoma.

Abstract Real‐time control of multiple cascaded devices is a key requirement for the development of complex silicon photonic circuits performing new sophisticated optical functionalities. This article describes how the dithering technique can be leveraged in combination with non‐invasive light probes to independently control the working point of many photonic components. The standard technique is extended by introducing the concept of orthogonal dithering signals to simultaneously discriminate the effect of different actuators, while the idea of frequency re‐use is discussed to limit the complexity of control systems in cascaded architectures. After a careful analysis of the problem, the article presents an automated feedback strategy to tune and lock photonic devices in the maxima/minima of their transfer functions with given response speed and sensitivity. The trade‐offs of this approach are discussed in detail to provide guidelines for the design of the feedback loop. Experimental demonstrations on a mesh of Mach‐Zehnder interferometers and on cascaded ring resonators are discussed to validate the proposed control architecture in different scenarios and applications.

Abstract Malaria remains the most important mosquito‐borne infectious disease worldwide, with 229 million new cases and 409.000 deaths in 2019. The infection is caused by a protozoan parasite which attacks red blood cells by feeding on hemoglobin and transforming it into hemozoin. Despite the WHO recommendation of prompt malaria diagnosis, the quality of microscopy‐based diagnosis is frequently inadequate while rapid diagnostic tests based on antigens are not quantitative and still affected by non‐negligible false negative/positive results. PCR‐based methods are highly performant but still not widely used in endemic areas. Here, a diagnostic tool (TMek), based on the paramagnetic properties of hemozoin nanocrystals in infected red blood cells (i‐RBCs), is reported on. Exploiting the competition between gravity and magnetic forces, i‐RBCs in a whole blood specimen are sorted and electrically detected in a microchip. The amplitude and time evolution of the electrical signal allow for the quantification of i‐RBCs (in the range 10–105 i‐RBC µL−1) and the distinction of the infection stage. A preliminary validation study on 75 patients with clinical suspect of malaria shows on‐field operability, without false negative and a few false positive results. These findings indicate the potential of TMek as a quantitative, stage‐selective, rapid test for malaria.

Integrated optical biosensors are gaining increasing attention for their exploitation in lab-on-chip platforms. The standard detection method is based on the measurement of the shift of some optical quantity induced by the immobilization of target molecules at the surface of an integrated optical element upon biomolecular recognition. However, this requires the acquisition of said quantity over the whole hybridization process, which can take hours, during which any external perturbation (e.g., temperature and mechanical instability) can seriously affect the measurement and contribute to a sizeable percentage of invalid tests. Here, we present a different assay concept, named Opto-Magnetic biosensing, allowing us to optically measure off-line (i.e., post hybridization) tiny variations of the effective refractive index seen by microring resonators upon immobilization of magnetic nanoparticles labelling target molecules. Bound magnetic nanoparticles are driven in oscillation by an external AC magnetic field and the corresponding modulation of the microring transfer function, due to the effective refractive index dependence on the position of the particles above the ring, is recorded using a lock-in technique. For a model system of DNA biomolecular recognition we reached a lowest detected concentration on the order of 10 pm, and data analysis shows an expected effective refractive index variation limit of detection of 7.5×10−9 RIU, in a measurement time of just a few seconds.

We characterize a novel micro-sensor with pairs of interdigitated combs of microelectrodes designed to detect particles in air. We evaluate the sensor’s response to 1 µm Polystyrene Latex (PSL) particles experimentally and crosscheck the results with simulations. Experiment and simulation show good consistency. Based on the promising results we propose a redesign of the capacitive particle sensor with respect to PM2.5.