Search

Traditional surgical planning (TSP) and virtual surgical planning (VSP) have been used in bimaxillary osteotomy planning. The time is taken in the planning time and operating stages, and the working/doctor/total time of either approach are useful determinants of the efficiency of the operating method and quality of care. This systematic review and meta-analysis examined if VSP has a comparative advantage over TSP in the bimaxillary osteotomy. Cochrane Library, PubMed, EMBASE, and Google Scholar were used as databases to collect studies that met the outlined inclusion criteria based on PRISMA. Eight of 759 studies were considered to meet the eligibility criteria, and six fit for meta-analysis. The findings demonstrated significant VSP advantage over TSP in planning time (Z = 3.97 (P < 0.00001), WMD = −5.29 (CI −7.90 to −2.68)). While more time-efficient than TSP, the difference with VSP was not significant during surgery (Z = 0.44 (P = 0.66), WMD = −0.10 (CI −0.51 to 0.34)). The study used random effects due to the high I2 of the planning mean differences. The continued evolution of VSP and improved application knowledge will be important in reducing the time of planning and surgery, thus improving the outcomes of the complex bimaxillary osteotomy. The current evidence shows that VSP significantly performs better than TSP in reducing the bimaxillary osteotomy planning time, but the timing difference is not significant during surgery. Future analysis will benefit from using studies with standard research and reporting metrics and procedures, thus improving evidence-based clinical practice.

In sialendoscopy, ducts are dilated and the salivary glands are irrigated with saline. Contrast-enhanced ultrasound sialendoscopy (CEUSS), using microbubbles, may facilitate the monitoring of irrigation solution penetration in the ductal system and parenchyma. It is imperative to test CEUSS for its safety and feasibility in Sjögren’s syndrome (SS) patients. CEUSS was performed on 10 SS patients. The primary outcomes were safety, determined by the occurrence of (serious) adverse events ((S)AEs), and feasibility. The secondary outcomes were unstimulated and stimulated whole saliva (UWS and SWS) flow rates, xerostomia inventory (XI), clinical oral dryness score, pain, EULAR Sjögren’s syndrome patient reported index (ESSPRI), and gland topographical alterations. CEUSS was technically feasible in all patients. Neither SAEs nor systemic reactions related to the procedure were observed. The main AEs were postoperative pain (two patients) and swelling (two patients). Eight weeks after CEUSS, the median UWS and SWS flow had increased significantly from 0.10 to 0.22 mL/min (p = 0.028) and 0.41 to 0.61 mL/min (p = 0.047), respectively. Sixteen weeks after CEUSS, the mean XI was reduced from 45.2 to 34.2 (p = 0.02). We conclude that CEUSS is a safe and feasible treatment for SS patients. It has the potential to increase salivary secretion and reduce xerostomia, but this needs further investigation.

Incidence of oropharyngeal squamous cell carcinoma (OPSCC) is increasing globally and the human papillomavirus (HPV) has been linked to this increase. This study aimed to present a comprehensive overview of OPSCC trends in incidence rates by age group and investigate differences in risk factors profile. Netherlands Cancer Registry data from 1989-2018 were analyzed to calculate the annual percentage change (APC) over European standardized incidence rates by gender and age group using joinpoint regression software. Smoking, alcohol drinking and HPV-status were available for 2015-2018. During 1989-2018, 13 048 cases of OPSCC were reported with a male-to-female ratio of 2.1:1. The overall incidence rate increased by 5.4% (APC) annually from 1989 to 1996 but slowed thereafter by 1.2%. Significant declines were found in patients of 35-44 years (APCs -3.7%). Adults aged 45-59 years displayed significant increases from 1989 to 2001, followed by a significant decline. In patients >= 60 years, the incidence rates increased overall, with APC for women being consistently higher than men. The data on HPV status was available for 69% of the patients, of whom 47% were HPV+. Smoking and alcohol consumption were more prevalent, that is 75 and 76 % respectively. The declining trends of OPSCC for Dutch people aged 35-44 years from 1989 to 2018 and for those aged 45-59 years from 2002 onwards are inconsistent to trends reported elsewhere in the developed countries. The prevalence of smoking and drinking alcohol was quite high in all age groups, whereas the proportion of HPV-positivity was relatively low.

There has been an increasing trend in oral squamous cell carcinoma (OSCC) in patients under 45 years of age. The aim of this study was to evaluate the burden of OSCC in the Netherlands between 1989 and 2018 among young adults (age 20 34 years) when compared to adults (age 35-44 years), and to describe the burden in older groups as well, utilizing cancer registry data to characterize incidence patterns by age, sex, and risk factors. A total of 18,963 cases of OSCC were reported. The overall incidence rate, as measured by annual percentage change (APC), increased significantly from 1989 to 2010 by 1.3% per year (95% confidence interval (CI) 0.9-1.7%) but decreased thereafter by -0.9% (95% CI -2.5% to 0.7%). Annual incidence increased significantly by 2.4% (95% CI 1.1-3.8%) for patients aged 20-34 years, while it decreased for those aged 35-44 years by -0.9% (95% CI -1.7% to 0.0%). In patients older than 60 years, incidence rates increased overall (60-74 years: APC 1.8%, 95% CI 1.5-2.1%; >= 75 years: APC 1.5%, 95% CI 1.2-1.9%). Overall, 66.5% of patients were smokers and 65.3% were alcohol consumers. The marked differences in incidence within the young age subgroups warrants further investigation to elucidate any likely disparity in biological process and clinical outcomes in these populations.

This study aimed to analyze the efficacy of stem cell-based tissue engineering for the treatment of alveolar cleft (AC) and cleft palate (CP) defects in animal models. Systematic review and meta-analysis. Preclinical studies on alveolar cleft repair in maxillofacial practice. Electronic search was performed using PubMed, Embase, and Cochrane databases. Pre-clinical studies, where stem cell-based tissue engineering was used in the reconstruction of AC and CP in animal models were included. Quality of the selected articles was evaluated using SYRCLE (SYstematic Review Centre for Laboratory animal Experimentation). Review of alveolar cleft bone augmentation interventions in preclinical models. Outcome parameters registered were new bone formation (NBF) and/or bone mineral density (BMD). Thirteen large and twelve small animal studies on AC (21) and CP (4) reconstructions were included. Studies had an unclear-to-high risk of bias. Bone marrow mesenchymal stem cells were the most widely used cell source. Meta-analyses for AC indicated non-significant benefits in favor of: (1) scaffold + cells over scaffold-only (NBF P = .13); and (2) scaffold + cells over empty control (NBF P = .66; BMD P = .31). Interestingly, dog studies using regenerative grafts showed similar to superior bone formation compared to autografts. Meta analysis for the CP group was not possible. AC and CP reconstructions are enhanced by addition of osteogenic cells to biomaterials. Directions and estimates of treatment effect are useful to predict therapeutic efficacy and guide future clinical trials of bone tissue engineering.

Objective To evaluate the outcomes of Secondary Alveolar Bone Grafting (SABG) in patients treated either in daycare or with multiple day hospitalization (MDH) in relation to costs and complication rates. Design Retrospective comparative cohort study. Setting The data was collected from two settings: Postoperative daycare or MDH after oral cleft surgery in an Academic Medical Center in The Netherlands. Patients Data of 137 patients with unilateral Cleft lip, alveolus, and palate (CLAP) treated between 2006-2018 were evaluated. Registered clinical variables: age, gender, cleft subtype, bone donor site, type of hospitalization, length of stay, additional surgery, complications, surgeons, and costs. Interventions Closure of the alveolar cleft with/without closure of the anterior palate. Main outcome measures Univariate analyses. Results Of the 137 patients, 46.7% were treated in MDH, and 53.3% in daycare. Total costs for daycare were significantly lower ( P Conclusions Daycare after alveolar cleft surgery is about as safe as MDH, but significantly cheaper.

Objectives: Mandibular retromolar (predominantly cortical) and maxillary tuberosity (predominantly cancellous) bone grafts are used in patients undergoing maxillary sinus floor elevation (MSFE) for dental implant placement. The aim of this retrospective cohort study was to investigate whether differences exist in bone formation and vascularization after grafting with either bone source in patients undergoing MSFE. Methods: Fifteen patients undergoing MSFE were treated with retromolar (n = 9) or tuberosity (n = 6) bone grafts. Biopsies were taken 4 months postoperatively prior to dental implant placement, and histomorphometrically analyzed to quantify bone and osteoid area, number of total, apoptotic, and receptor activator of nuclear factor-κB ligand (RANKL)-positive osteocytes, small and large-sized blood vessels, and osteoclasts. The grafted area was divided in three regions (caudal-cranial): RI, RII, and RIII. Results: Bone volume was 40% (RII, RIII) higher and osteoid volume 10% (RII) lower in retromolar compared to tuberosity-grafted areas. Total osteocyte number and number of RANKL-positive osteocytes were 23% (RII) and 90% (RI, RII) lower, but osteoclast number was higher (retromolar: 12, tuberosity: 0) in retromolar-grafted areas. The total number of blood vessels was 80% (RI) to 60% (RIII) lower, while the percentage of large-sized blood vessels was 86% (RI) to 25% (RIII) higher in retromolar-grafted areas. Number of osteocyte lacunae and apoptotic osteocytes were similar in both bone grafts used. Conclusions: Compared to the retromolar bone, tuberosity bone showed increased bone vitality and vascularization in patients undergoing MSFE, likely due to faster bone remodeling or earlier start of new bone formation. Therefore, tuberosity bone grafts might perform better in enhancing bone regeneration.

Objectives c-Met, a receptor tyrosine kinase, is involved in the growth, invasion and metastasis of a variety of cancers. In a set of cell lines from several solid tumors, a five-fold increase in c-Met expression after irradiation has been reported. This study aimed to assess if c-Met is likewise abundantly expressed in oral tongue squamous cell carcinoma (OTSCC) upon exposure to irradiation, followed by a Met-induced biological response. Materials and methods Six OTSCC cell lines were exposed to gamma radiation doses of 2, 4, and 6 Gray. The changes in c-Met protein levels were assessed by western blot and flow cytometry. c-Met gene expression, cell migration, proliferation and cell cycle assays were performed as phenotypic readouts. Results Irradiation resulted in upregulation of c.Met in all cell lines with different time kinetics. On average the cells displayed minimal c-Met expression on their surface ranging from 5 to 30% of total protein. Abrupt downregulation of c-Met surface expression occurred one hour after radiation but recovered 48 h post-radiation. Intracellularly, the highest level of expression was found on day 5 after radiation exposure. Irradiation induced aggressive invasive potential of the cells as determined in cell migration assays, particularly in cell lines with the highest c-Met expression. Conclusions These results provide novel insights into both intracellular and extracellular dynamics of c-Met expression profiles upon irradiation of OTSCC cells in vitro. It might also suggest that radiation enhances cell migration, indicative of invasiveness, through c-Met up-regulation, at least for certain types of OTSCC cells.

Purpose of Review Bone regeneration plays an important role in contemporary clinical treatment. Bone tissue engineering should result in successful bone regeneration to restore congenital or acquired bone defects in the human skeleton. Osteocytes are thought to have a governing role in bone remodeling by regulating osteoclast and osteoblast activity, and thus bone loss and formation. In this review, we address the so far largely unknown role osteocytes may play in bone tissue regeneration. Recent Findings Osteocytes release biochemical signaling molecules involved in bone remodeling such as prostaglandins, nitric oxide, Wnts, and insulin-like growth factor-1 (IGF-1). Treatment of mesenchymal stem cells in bone tissue engineering with prostaglandins (e.g., PGE2, PGI2, PGF2α), nitric oxide, IGF-1, or Wnts (e.g., Wnt3a) improves osteogenesis. Summary This review provides an overview of the functions of osteocytes in bone tissue, their interaction with other bone cells, and their role in bone remodeling. We postulate that osteocytes may have a pivotal role in bone regeneration as well, and consequently that the bone regeneration process may be improved effectively and rapidly if osteocytes are optimally used and stimulated.

O prolapso de órgão pélvico (POP) é resultado do enfraquecimento dos tecidos de sustentação e de suspensão dessa região, incluindo os músculos levantadores do ânus, a fáscia endopélvica, os ligamentos e a parede vaginal. Sabe-se que os fatores de risco mais importantes para o POP, como gravidez, parto vaginal e aumento da pressão intra-abdominal, causam lesão nos tecidos do assoalho pélvico. Assim, é possível que um processo de cicatrização imperfeito desses tecidos possa afetar sua homeostase e contribuir para o desenvolvimento do POP. Dessa forma, o objetivo deste artigo é revisar a fisiologia da cicatrização de tecidos do assoalho pélvico e discutir os fatores que interferem nesse processo. Para isso, foi feita uma revisão da literatura na base de dados do MEDLINE até 2017. Percebeu-se que, assim como na pele, a cicatrização das lesões do assoalho pélvico ocorre em quatro fases (hemostasia, inflamação, proliferação e remodelação), porém a duração de cada fase é maior nas diferentes estruturas do assoalho pélvico. Além disso, a pressão constante no assoalho pélvico está associada ao aumento da atividade da colagenase, afetando negativamente a cicatrização, enquanto o estrogênio melhora as propriedades mecânicas do tecido estirado e parece ser benéfico para a cicatrização das lesões na parede vaginal. De acordo com a literatura, os músculos, nervos, ligamentos ou parede vaginal danificados não recuperam totalmente suas características prévias. Desse modo, conclui-se que uma cicatrização imperfeita no assoalho pélvico resulta em tecidos com composição e propriedades mecânicas alteradas, o que pode levar à incidência ou progressão do POP.

OBJECTIVE: Oral tongue squamous cell carcinoma (OTSCC) frequently harbors non-functional p53 and depends on G2/M checkpoint mediated by WEE1. WEE1 suppression has been identified as a promising anti-tumor strategy. This study investigated the capacity of WEE1 kinase inhibitor (MK-1775) and its underlying mechanisms in enhancing radiation responses of OTSCC cells in vitro.MATERIALS AND METHODS: WEE1 kinase expression and its downstream target (CDK1) were investigated in OTSCC versus normal oral tissue. A synergistic combination of MK-1775 with radiation on OTSCC cell lines with different p53 statuses was assessed by viability assay. The radio-sensitizing effects of MK-1775 on apoptosis, cell cycle, DNA damage, and mitotic entry were also determined.RESULTS: Irradiation enhanced CDK1 expression in all tested cell lines, though the effect was far more pronounced in p53 mutated cell lines. MK-1775 exhibited inhibitory effects against the survival of all cell lines and enhanced their response to the radiation. These effects were strongly elicited by induction of apoptosis and lethal mitosis, but less likely by abrogation of radiation-induced G2 arrest.CONCLUSION: These results demonstrate the efficacy of MK-1775 in enhancing the radiation effect on OTSCC in vitro associated with a significant apoptotic death rate, identifying WEE1 inhibitor as a potent radiosensitizer in OTSCC irrespective of p53 mutational status.

Background: In tissue engineering, cellularization of scaffolds has typically been performed by seeding the cells after scaffold fabrication. 3D-printing technology now allows bioprinting of cells encapsulated in a hydrogel simultaneously with the scaffold material. Here, we aimed to investigate whether bioprinting or cell seeding post-printing is more effective in enhancing responses of pre-osteoblastic MC3T3-E1 cell line derived from mouse calvaria. Methods: Two methods were used for incorporation of pre-osteoblasts in poly(lactic-co-glycolic acid)/β-tricalcium phosphate (PLGA/β-TCP) scaffolds: first, seeding the cells after scaffold printing, and second, bioprinting of alginate-encapsulated cells between PLGA/β-TCP struts. AlamarBlue® assay was used to determine cell retention and proliferation. Live/dead staining and picrosirius red staining were used to assess cell viability and collagen deposition, respectively. Alkaline phosphatase activity was measured to assess the osteoblastic phenotype of pre-osteoblasts. Results: Cell retention was 51 ± 5% in cell-seeded and 87 ± 3% in bioprinted scaffolds, whereas cell viabilities were 87 ± 2% and 78 ± 4%, respectively. Cell proliferation was higher on cell-seeded scaffolds (day 7: 2.5-fold, day 14: 4.0-fold, day 21: 4.7-fold) compared with bioprinted scaffolds (1.2-fold, 2.1-fold, and 3.9-fold, respectively). At day 21, the voids between PLGA/β-TCP struts were covered with cell-deposited collagenous matrix in both scaffold types. Alkaline phosphatase activity was higher (3.4-fold) on cell-seeded scaffolds compared with bioprinted scaffolds. Conclusion: Our data demonstrate that encapsulation of pre-osteoblasts in alginate and printing inside PLGA/β-TCP scaffolds enhances cell retention but decreases cell proliferation and osteogenic differentiation compared to seeding cells on scaffolds post-printing. This might have important implications for bone tissue engineering. Lay Summary: Bioprinting, i.e., printing of hydrogel-encapsulated cells alone or in combination with scaffold material, presents an attractive tool for fabrication of customized tissue equivalents as opposed to conventional cell seeding on tissue engineering scaffolds. However, the function of the printed cells might be adversely affected by the hydrogel encapsulation and printing process. Our aim was to investigate whether bioprinting of alginate-encapsulated pre-osteoblasts in poly(lactic-co-glycolic) acid/β-tricalcium phosphate scaffold is more effective in enhancing cell retention, proliferation, and osteogenic differentiation as opposed to cell seeding post-printing. Our studies showed that the bioprinted scaffold had enhanced cell retention capacity, but impaired cell proliferation and osteogenic differentiation compared to the cell-seeded scaffold. These findings might have important implications for the improvement of alginate-based bioinks with, e.g., (natural) bioactive peptides for bioprinting of bone tissue engineering scaffolds. [Figure not available: see fulltext.].

Current cell-based bone tissue regeneration strategies cannot cover large bone defects. K-carrageenan is a highly hydrophilic and biocompatible seaweed-derived sulfated polysaccharide, that has been proposed as a promising candidate for tissue engineering applications. Whether κ-carrageenan can be used to enhance bone regeneration is still unclear. In this study, we aimed to investigate whether κ-carrageenan has osteogenic potential by testing its effect on pre-osteoblast proliferation and osteogenic differentiation in vitro. Treatment with κ-carrageenan (0.5 and 2 mg/mL) increased both MC3T3-E1 pre-osteoblast adhesion and spreading at 1 h. K-carrageenan (0.125–2 mg/mL) dose-dependently increased pre-osteoblast proliferation and metabolic activity, with a maximum effect at 2 mg/mL at day three. K-carrageenan (0.5 and 2 mg/mL) increased osteogenic differentiation, as shown by enhanced alkaline phosphatase activity (1.8-fold increase at 2 mg/mL) at day four, and matrix mineralization (6.2-fold increase at 2 mg/mL) at day 21. K-carrageenan enhanced osteogenic gene expression (Opn, Dmp1, and Mepe) at day 14 and 21. In conclusion, κ-carrageenan promoted MC3T3-E1 pre-osteoblast adhesion and spreading, metabolic activity, proliferation, and osteogenic differentiation, suggesting that κ-carrageenan is a potential osteogenic inductive factor for clinical application to enhance bone regeneration.

Five years ago in this journal we described our research into 3D bioprinting of ear cartilage for the purpose of making personalized cartilage implants for facial reconstruction. 3D bioprinting makes it possible to place living cells in a biodegradable scaffold to give a 3D structure to the tissue. We are able to develop a hybrid auricular cartilage implant model. However, Long term in vivo experiments are needed to test preclinical applicability. Nevertheless, the work presented in our studies provides a potential strategy for the use of biofabricated tissue constructs in the clinic. In short, 3D bioprinting is still in its infancy and has no direct clinical application yet. Before the step to the clinic can be made, the technique still has to go through a preclinical phase in which it is investigated how the 3D printed tissue would appear in vivo.

Background One of the main challenges with conventional scaffold fabrication methods is the inability to control scaffold architecture. Recently, scaffolds with controlled shape and architecture have been fabricated using three-dimensional printing (3DP). Herein, we aimed to determine whether the much tighter control of microstructure of 3DP poly(lactic-co-glycolic) acid/β-tricalcium phosphate (PLGA/β-TCP) scaffolds is more effective in promoting osteogenesis than porous scaffolds produced by solvent casting/porogen leaching. Methods Physical and mechanical properties of porous and 3DP scaffolds were studied. The response of pre-osteoblasts to the scaffolds was analyzed after 14 days. Results TThe 3DP scaffolds had a smoother surface (Ra: 22 ± 3 µm) relative to the highly rough surface of porous scaffolds (Ra: 110 ± 15 µm). Water contact angle was 112 ± 4° on porous and 76 ± 6° on 3DP scaffolds. Porous and 3DP scaffolds had the pore size of 408 ± 90 and 315 ± 17 µm and porosity of 85 ± 5% and 39 ± 7%, respectively. Compressive strength of 3DP scaffolds (4.0 ± 0.3 MPa) was higher than porous scaffolds (1.7 ± 0.2 MPa). Collagenous matrix deposition was similar on both scaffolds. Cells proliferated from day 1 to day 14 by fourfold in porous and by 3.8-fold in 3DP scaffolds. Alkaline phosphatase (ALP) activity was 21-fold higher in 3DP scaffolds than porous scaffolds. Conclusion The 3DP scaffolds show enhanced mechanical properties and ALP activity compared to porous scaffolds in vitro, suggesting that 3DP PLGA/β-TCP scaffolds are possibly more favorable for bone formation.

Three-dimensional (3D) bioprinting of patient-specific auricular cartilage constructs could aid in the reconstruction process of traumatically injured or congenitally deformed ear cartilage. To achieve this, a hydrogel-based bioink is required that recapitulates the complex cartilage microenvironment. Tissue-derived decellularized extracellular matrix (dECM)-based hydrogels have been used as bioinks for cell-based 3D bioprinting because they contain tissue-specific ECM components that play a vital role in cell adhesion, growth, and differentiation. In this study, porcine auricular cartilage tissues were isolated and decellularized, and the decellularized cartilage tissues were characterized by histology, biochemical assay, and proteomics. This cartilage-derived dECM (cdECM) was subsequently processed into a photo-crosslinkable hydrogel using methacrylation (cdECMMA) and mixed with chondrocytes to create a printable bioink. The rheological properties, printability, and in vitro biological properties of the cdECMMA bioink were examined. The results showed cdECM was obtained with complete removal of cellular components while preserving major ECM proteins. After methacrylation, the cdECMMA bioinks were printed in anatomical ear shape and exhibited adequate mechanical properties and structural integrity. Specifically, auricular chondrocytes in the printed cdECMMA hydrogel constructs maintained their viability and proliferation capacity and eventually produced cartilage ECM components, including collagen and glycosaminoglycans (GAGs). The potential of cell-based bioprinting using this cartilage-specific dECMMA bioink is demonstrated as an alternative option for auricular cartilage reconstruction.

IntroductionWe established a promising sialendoscopic treatment for in vivo enhancement of salivation in salivary glands affected by Sjögren’s syndrome (SS). In this technique, the ducts of the salivary glands are irrigated with saline and steroids. This allows for dilatation of ductal strictures and removal of debris. Unfortunately, it is not possible to assess the delivery and penetration of saline or medications in the ductal system and parenchyma. To address this problem, we will conduct contrast-enhanced ultrasound sialendoscopy (CEUSS) using sulphur hexafluoride microbubbles. To the best of our knowledge, microbubbles have never been used for the treatment of salivary glands in SS. It is, therefore, imperative to test this application for its safety and feasibility.Methods and analysisA single-arm phase I study will be performed in 10 SS patients. Under local anaesthesia, ultrasound (US) guided infusion of the parotid and submandibular glands with microbubbles will be performed. Continuous US imaging will be used to visualise the glands, including the location of strictures and occlusions. Main outcomes will be the evaluation of safety and technical feasibility of the experimental treatment. Secondary outcomes will consist of determinations of unstimulated whole mouth saliva flow, stimulated whole mouth saliva flow, stimulated parotid saliva flow, clinical oral dryness, reported pain, xerostomia, disease activity, salivary cytokine profiles and clinical SS symptoms. Finally, salivary gland topographical alterations will be evaluated by US.Ethics and disseminationEthical approval for this study was obtained from the Medical Ethics Committee of the Amsterdam University Medical Centre, Amsterdam, The Netherlands (NL68283.029.19). data will be presented at national and international conferences and published in a peer-reviewed journal. The study will be implemented and reported in line with the Standard Protocol Items: Recommendations for Interventional Trials’ statement.Trial registration numbersThe Netherlands Trial Register: NL7731, MREC Trial Register: NL68283.029.19; Pre-results.

Fluid flow dynamics and oxygen-concentration in 3D-printed scaffolds within perfusion bioreactors are sensitive to controllable bioreactor parameters such as inlet flow rate. Here we aimed to determine fluid flow dynamics, oxygen-concentration, and cell proliferation and distribution in 3D-printed scaffolds as a result of different inlet flow rates of perfusion bioreactors using experiments and finite element modeling. Pre-osteoblasts were treated with 1 h pulsating fluid flow with low (0.8 Pa; PFFlow) or high peak shear stress (6.5 Pa; PFFhigh), and nitric oxide (NO) production was measured to validate shear stress sensitivity. Computational analysis was performed to determine fluid flow between 3D-scaffold-strands at three inlet flow rates (0.02, 0.1, 0.5 ml/min) during 5 days. MC3T3-E1 pre-osteoblast proliferation, matrix production, and oxygen-consumption in response to fluid flow in 3D-printed scaffolds inside a perfusion bioreactor were experimentally assessed. PFFhigh more strongly stimulated NO production by pre-osteoblasts than PFFlow. 3D-simulation demonstrated that dependent on inlet flow rate, fluid velocity reached a maximum (50–1200 μm/s) between scaffold-strands, and fluid shear stress (0.5–4 mPa) and wall shear stress (0.5–20 mPa) on scaffold-strands surfaces. At all inlet flow rates, gauge fluid pressure and oxygen-concentration were similar. The simulated cell proliferation and distribution, and oxygen-concentration data were in good agreement with the experimental results. In conclusion, varying a perfusion bioreactor's inlet flow rate locally affects fluid velocity, fluid shear stress, and wall shear stress inside 3D-printed scaffolds, but not gauge fluid pressure, and oxygen-concentration, which seems crucial for optimized bone tissue engineering strategies using bioreactors, scaffolds, and cells.

In the field of rare bone diseases in particular, a broad care team of specialists embedded in multidisciplinary clinical and research environment is essential to generate new therapeutic solutions and approaches to care. Collaboration among clinical and research departments within a University Medical Center is often difficult to establish, and may be hindered by competition and non-equivalent cooperation inherent in a hierarchical structure. Here we describe the “collaborative organizational model” of the Amsterdam Bone Center (ABC), which emerged from and benefited the rare bone disease team. This team is often confronted with pathologically complex and under-investigated diseases. We describe the benefits of this model that still guarantees the autonomy of each team member, but combines and focuses our collective expertise on a clear shared goal, enabling us to capture synergistic and innovative opportunities for the patient, while avoiding self-interest and possible harmful competition.

In bone tissue engineering, prediction of forces induced to the native bone during normal functioning is important in the design, fabrication, and integration of a scaffold with the host. The aim of this study was to customize the mechanical properties of a layer-by-layer 3D-printed poly(ϵ-caprolactone) (PCL) scaffold estimated by finite element (FE) modeling in order to match the requirements of the defect, to prevent mechanical failure, and ensure optimal integration with the surrounding tissue. Forces and torques induced on the mandibular symphysis during jaw opening and closing were predicted by FE modeling. Based on the predicted forces, homogeneous-structured PCL scaffolds with 3 different void sizes (0.3, 0.6, and 0.9 mm) were designed and 3D-printed using an extrusion based 3D-bioprinter. In addition, 2 gradient-structured scaffolds were designed and 3D-printed. The first gradient scaffold contained 2 regions (0.3 mm and 0.6 mm void size in the upper and lower half, respectively), whereas the second gradient scaffold contained 3 regions (void sizes of 0.3, 0.6, and 0.9 mm in the upper, middle and lower third, respectively). Scaffolds were tested for their compressive and tensile strength in the upper and lower halves. The actual void size of the homogeneous scaffolds with designed void size of 0.3, 0.6, and 0.9 mm was 0.20, 0.59, and 0.95 mm, respectively. FE modeling showed that during opening and closing of the jaw, the highest force induced on the symphysis was a compressive force in the transverse direction. The compressive force was induced throughout the symphyseal line and reduced from top (362.5 N, compressive force) to bottom (107.5 N, tensile force) of the symphysis. Compressive and tensile strength of homogeneous scaffolds decreased by 1.4-fold to 3-fold with increasing scaffold void size. Both gradient scaffolds had higher compressive strength in the upper half (2 region-gradient scaffold: 4.9 MPa; 3 region-gradient scaffold: 4.1 MPa) compared with the lower half (2 region-gradient scaffold: 2.5 MPa; 3 region-gradient scaffold: 2.7 MPa) of the scaffold. 3D-printed PCL scaffolds had higher compressive strength in the scaffold layer-by-layer building direction compared with the side direction, and a very low tensile strength in the scaffold layer-by-layer building direction. Fluid shear stress and fluid pressure distribution in the gradient scaffolds were more homogeneous than in the 0.3 mm void size scaffold and similar to the 0.6 mm and 0.9 mm void size scaffolds. In conclusion, these data show that the mechanical properties of 3D-printed PCL scaffolds can be tailored based on the predicted forces on the mandibular symphysis. These 3D-printed PCL scaffolds had different mechanical properties in scaffold building direction compared with the side direction, which should be taken into account when placing the scaffold in the defect site. Our findings might have implications for improved performance and integration of scaffolds with native tissue.

BACKGROUND AIMS: After a myocardial infarction (MI) atherosclerosis is accelerated leading to destabilization of the atherosclerotic plaque. mesenchymal stromal cells are a promising therapeutic option for atherosclerosis. Previously, we demonstrated a novel stem cell delivery technique, with adipose stem cells coupled to microbubbles (i.e., StemBells) as therapy after MI. In this study, we aim to investigate the effect of StemBell therapy on atherosclerotic plaques in an atherosclerotic mouse model after MI.METHODS: MI was induced in atherosclerotic Apolipoprotein E-deficient mice that were fed a high-fat Western diet. Six days post-MI, the mice received either 5 × 105/100 µL StemBells or vehicle intravenously. The effects of StemBell treatment on the size and stability of aortic root atherosclerotic plaques and the infarcted heart were determined 28 days post-MI via (immuno)histological analyses. Moreover, monocyte subtypes and lipids in the blood were studied.RESULTS: StemBell treatment resulted in significantly increased cap thickness, decreased intra-plaque macrophage density and increased percentage of intra-plaque anti-inflammatory macrophages and chemokines, without affecting plaque size and serum cholesterol/triglycerides. Furthermore, StemBell treatment significantly increased the percentage of anti-inflammatory macrophages within the infarcted myocardium but did not affect cardiac function nor infarct size. Finally, also the average percentage of anti-inflammatory monocytes in the circulation was increased after StemBell therapy.DISCUSSION: StemBell therapy increased cap thickness and decreased intra-plaque inflammation after MI, indicative of stabilized atherosclerotic plaque. It also induced a shift of circulating monocytes and intra-plaque and intra-cardiac macrophages towards anti-inflammatory phenotypes. Hence, StemBell therapy may be a therapeutic option to prevent atherosclerosis acceleration after MI.

Objectives: Synthetic biphasic calcium phosphate (BCP) with a hydroxyapatite/ß-tricalcium phosphate (HA/ß-TCP) ratio of 60/40 (BCP60/40) is successfully used as alternative for autologous bone in patients undergoing maxillary sinus floor elevation (MSFE) for dental implant placement. A high percentage of HA in BCP60/40 may hamper efficient scaffold remodeling. Osteogenesis and neovascularization are pivotal in effective bone regeneration. We aimed to investigate whether differences exist in osteogenic and/or vasculogenic potential of BCP60/40 and BCP20/80 in patients undergoing MSFE. Materials and methods: Twenty patients undergoing MSFE were treated with BCP60/40 (n = 10) or BCP20/80 (n = 10). Bone and graft volumes were determined by micro-computed tomography and histomorphometrical analysis of biopsies of the augmented region. Osteoid volumes, number of osteoclasts, and blood vessels were determined by histomorphometrical analysis. The biopsies were taken 6.5 months (26 weeks) postoperatively prior to dental implant placement. Results: Bone and osteoid volumes were 9.7% and 0.8% higher at the most cranial side of the BCP20/80 biopsies compared to the BCP60/40 biopsies. Graft volumes, number of osteoclasts, and blood vessels were similar in both groups. Conclusions: BCP20/80 showed enhanced osteogenic potential in patients undergoing MSFE compared to BCP60/40, due to either a faster bone remodeling rate or an earlier start of bone formation in BCP20/80-treated patients, suggesting that a higher TCP content positively contributes to the bone remodeling rate. Therefore, BCP20/80 might perform better, at least in the short term, as a scaffold for bone augmentation in the MSFE model than BCP60/40 as more bone is formed, and more osteoid is deposited at the cranial side in BCP20/80-treated patients compared to BCP60/40-treated patients. However, catch-up of BCP60/40 in the long term cannot be ruled out.

This study focuses on the development of a universal mathematical model for drug release kinetics from liposomes to allow in silico prediction of optimal conditions for fine-tuned controlled drug release. As a prelude for combined siRNA-drug delivery, nanoliposome formulations were optimized using various mole percentages of a cationic lipid (1,2-dioleoyl-3-trimethylammonium-propane, DOTAP) in the presence or absence of 3 mol% distearoyl phosphoethanolamine, polyethylene glycol (PEG–2000mDSPE). Outcome parameters were particle size, zeta potential, entrapment efficiency, in vitro drug release, and tumor cell kill efficiency. The optimized formula (containing 20% DOTAP with 3% DSPE-mPEG(2000) was found to be stable for six months, with round-shaped particles without aggregate formation, an average diameter of 71 nm, a suitable positive charge, and 89% drug encapsulation efficiency (EE). The 41% drug release during 6 h confirmed controlled release. Furthermore, the release profiles as functions of pH and temperature were investigated and the kinetics of the drug release could adequately be fitted to Korsmeyer–Peppas’ model by multiple regression analysis. The statistical parameters confirmed good conformity of final models. Functionality of the novel cationic liposome formulations (± DOX) was tested on osteosarcoma (OS) cell lines. Increased OS cell toxicity (1.3-fold) was observed by the DOX-loaded vs. the free DOX. A feasibility pilot showed that siRNA could be loaded efficiently as well. In conclusion, we have established a predictive mathematical model for the fine-tuning of controlled drug release from liposomal formulations, while creating functional drug-delivery liposomes with potential for siRNA co-delivery to increase specificity and efficacy. (Figure presented.)

Background: There is a great interest in developing biomarkers to enhance early detection and clinical management of tongue squamous cell carcinoma (TSCC). However, the developmental path towards a clinically valid biomarker remains extremely challenging. Ideally, the initial key step in moving a newly discovered biomarker towards clinical implementation is independent replication. Therefore, the focus of this review is on biomarkers that consistently showed clinical relevance in two or more publications. Methods: We searched PubMed database for relevant papers across different TSCC sample sources, i.e., body fluids (saliva, serum/plasma) and tissues. No restriction regarding the date of publication was applied except for immunohistochemistry (IHC); only studies published between 2010 and June 2017 were included. Results: The search strategy identified 1429 abstracts, of which 96 papers, examining 150 biomarkers, were eventually included. Of these papers, 66% were exploratory studies evaluating single or a panel of biomarkers in one publication. Ultimately, based on studies that had undergone validation for their clinical relevance in at least two independent studies, we identified 10 promising candidates, consisting of different types of molecules (IL-6, IL-8, and Prolactin in liquid samples; HIF-1α, SOX2, E-cadherin, vimentin, MALAT1, TP53, and NOTCH1 in tissue biopsies).Conclusions: Although more exploratory research is needed with newer methods to identify biomarkers for TSCC, rigorous validation of biomarkers that have already shown unbiased assessment in at least two publications should be considered a high priority. Further research on these promising biomarkers or their combination in multi-institutional studies, could provide new possibilities to develop a specific panel for early diagnosis, prognosis, and individualized treatments.

Objective In this study we prepared a novel formulation of liposomal doxorubicin (L- DOX). The drug dose was optimized by analyses of cellular uptake and cell viability of osteosarcoma (OS) cell lines upon exposure to nanoliposomes that contained varying DOX concentrations. We intended to reduce the cytotoxicity of DOX and improve characteristics of the nanosystems. Materials and Methods In this experimental study, we prepared liposomes by the pH gradient hydration method. Various characterization tests that included dynamic light scattering (DLS), cryogenic transmission electron microscopy (Cryo-TEM) imaging, and UV- Vis spectrophotometry were employed to evaluate the quality of the nanocarriers. In addition, the CyQUANT® assay and fluorescence microscope imaging were used on various OS cell lines (MG-63, U2-OS, SaOS-2, SaOS-LM7) and Human primary osteoblasts cells, as novel methods to determine cell viability and in vitro transfection efficacy. Results We observed an entrapment efficiency of 84% for DOX within the optimized liposomal formulation (L-DOX) that had a liposomal diameter of 96 nm. Less than 37% of DOX released after 48 hours and L-DOX could be stored stably for 14 days. L-DOX increased DOX toxicity by 1.8-4.6 times for the OS cell lines and only 1.3 times for Human primary osteoblasts cells compared to free DOX, which confirmed a higher sensitivity of the OS cell lines versus Human primary osteoblasts cells for L-DOX. We deduced that L- DOX passed more freely through the cell membrane compared to free DOX. Conclusion We successfully synthesized a stealth L-DOX that contained natural phospholipid by the pH gradient method, which could encapsulate DOX with 84% efficiency. The resulting nanoparticles were round, with a suitable particle size, and stable for 14 days. These nanoparticles allowed for adequately controlled DOX release, increased cell permeability compared to free DOX, and increased tumor cell death. L-DOX provided a novel, more effective therapy for OS treatment.

Bone tissue engineering techniques are a promising alternative for the use of autologous bone grafts to reconstruct bone defects in the oral and maxillofacial region. However, for successful bone regeneration, adequate vascularization is a prerequisite. This review presents and discusses the application of stem cells and new strategies to improve vascularization, which may lead to feasible clinical applications. Multiple sources of stem cells have been investigated for bone tissue engineering. The stromal vascular fraction (SVF) of human adipose tissue is considered a promising single source for a heterogeneous population of essential cells with, amongst others, osteogenic and angiogenic potential. Enhanced vascularization of tissue-engineered grafts can be achieved by different mechanisms: vascular ingrowth directed from the surrounding host tissue to the implanted graft, vice versa, or concomitantly. Vascular ingrowth into the implanted graft can be enhanced by (i) optimizing the material properties of scaffolds and (ii) their bioactivation by incorporation of growth factors or cell seeding. Vascular ingrowth directed from the implanted graft towards the host tissue can be achieved by incorporating the graft with either (i) preformed microvascular networks or (ii) microvascular fragments (MF). The latter may have stimulating actions on both vascular ingrowth and outgrowth, since they contain angiogenic stem cells like SVF, as well as vascularized matrix fragments. Both adipose tissue-derived SVF and MF are cell sources with clinical feasibility due to their large quantities that can be harvested and applied in a one-step surgical procedure. During the past years, important advancements of stem cell application and vascularization in bone tissue regeneration have been made. The development of engineered in vitro 3D models mimicking the bone defect environment would facilitate new strategies in bone tissue engineering. Successful clinical application requires innovative future investigations enhancing vascularization.

OBJECTIVES: The aim of the present study was to assess the outcomes of radical and conservative treatment approaches of solid/multicystic and unicystic ameloblastoma in terms of recurrence rates.MATERIAL AND METHODS: A systematic review and meta-analysis was conducted based on the PRISMA statement. Search was performed using PubMed, Embase, SCOPUS, and Web of Science for articles published from January 1969 until March 2018. Quality assessment of the selected articles was conducted using the Quality Appraisal of Case Series Studies Checklist. The meta-analysis was performed using the MedCalc program.RESULTS: The search strategy yielded 6,984 articles; 20 studies met the eligibility criteria and were included in the meta-analysis. The pooled recurrence rate of solid/multicystic ameloblastomas following radical treatment was 8%, while conservative treatment caused recurrences in 41%. For unicystic ameloblastomas, these values were 3% and 21%, respectively. The risk of recurrences in both types of ameloblastomas following radical treatment was lower than following conservative treatment.CONCLUSIONS: The present study showed statistically significant differences in recurrence favoring radical treatment for both unicystic and solid/multicystic ameloblastoma. The solid/multicystic type showed more recurrences than the unicystic type. Unfortunately, since only retrospective studies were available, the evidence is less strong as wished for.

The aim of this study was to design and manufacture an easily assembled cartilage implant model for auricular reconstruction. First, the printing accuracy and mechanical properties of 3D‐printed poly‐ε‐caprolactone (PCL) scaffolds with varying porosities were determined to assess overall material properties. Next, the applicability of alginate as cell carrier for the cartilage implant model was determined. Using the optimal outcomes of both experiments (in terms of (bio)mechanical properties, cell survival, neocartilage formation, and printing accuracy), a hybrid auricular implant model was developed. PCL scaffolds with 600 μm distances between strands exhibited the best mechanical properties and most optimal printing quality for further exploration. In alginate, chondrocytes displayed high cell survival (~83% after 21 days) and produced cartilage‐like matrix in vitro. Alginate beads cultured in proliferation medium exhibited slightly higher compressive moduli (6 kPa) compared to beads cultured in chondrogenic medium (3.5 kPa, p > .05). The final auricular mold could be printed with 300 μm pores and high fidelity, and the injected chondrocytes survived the culture period of 21 days. The presented hybrid auricular mold appears to be an adequate model for cartilage tissue engineering and may provide a novel approach to auricular cartilage regeneration for facial reconstruction. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1711–1721, 2019.

In bone tissue engineering, the intrinsic hydrophobicity and surface smoothness of three-dimensional (3D)-printed poly(ε-caprolactone) scaffolds hamper cell attachment, proliferation and differentiation. This intrinsic hydrophobicity of poly(ε-caprolactone) can be overcome by surface modifications, such as surface chemical modification or immobilization of biologically active molecules on the surface. Moreover, surface chemical modification may alter surface smoothness. Whether surface chemical modification or immobilization of a biologically active molecule on the surface is more effective to enhance pre-osteoblast proliferation and differentiation is currently unknown. Therefore, we aimed to investigate the osteogenic response of MC3T3-E1 pre-osteoblasts to chemically surface-modified and RGD-immobilized 3D-printed poly(ε-caprolactone) scaffolds. Poly(ε-caprolactone) scaffolds were 3D-printed consisting of strands deposited layer by layer with alternating 0°/90° lay-down pattern. 3D-printed poly(ε-caprolactone) scaffolds were surface-modified by either chemical modification using 3 M sodium hydroxide (NaOH) for 24 or 72 h, or by RGD-immobilization. Strands were visualized by scanning electron microscopy. MC3T3-E1 pre-osteoblasts were seeded onto the scaffolds and cultured up to 14 d. The strands of the unmodified poly(ε-caprolactone) scaffold had a smooth surface. NaOH treatment changed the scaffold surface topography from smooth to a honeycomb-like surface pattern, while RGD immobilization did not alter the surface topography. MC3T3-E1 pre-osteoblast seeding efficiency was similar (44%-54%) on all scaffolds after 12 h. Cell proliferation increased from day 1 to day 14 in unmodified controls (1.9-fold), 24 h NaOH-treated scaffolds (3-fold), 72 h NaOH-treated scaffolds (2.2-fold), and RGD-immobilized scaffolds (4.5-fold). At day 14, increased collagenous matrix deposition was achieved only on 24 h NaOH-treated (1.8-fold) and RGD-immobilized (2.2-fold) scaffolds compared to unmodified controls. Moreover, 24 h, but not 72 h, NaOH-treated scaffolds, increased alkaline phosphatase activity by 5-fold, while the increase by RGD immobilization was only 2.5-fold. Only 24 h NaOH-treated scaffolds enhanced mineralization (2.0-fold) compared to unmodified controls. In conclusion, RGD immobilization (0.011 μg mg-1 scaffold) on the surface and 24 h NaOH treatment of the surface of 3D-printed PCL scaffold both enhance pre-osteoblast proliferation and matrix deposition while only 24 h NaOH treatment results in increased osteogenic activity, making it the treatment of choice to promote bone formation by osteogenic cells.

In patients undergoing maxillary sinus floor elevation (MSFE) for dental implant placement, bone substitutes are currently evaluated as alternatives for autologous bone. However, bone substitutes have only osteoconductive properties and lack osteoinductive potential. Therefore, this phase I study evaluated the potential additive effect on bone regeneration by the addition of freshly isolated, autologous but heterologous stromal vascular fraction (SVF), which is highly enriched with adipose stromal/stem cells when compared with native adipose tissue. From 10 patients, SVF was procured using automatic processing, seeded on either β-tricalcium phosphate (n = 5) or biphasic calcium phosphate carriers (n = 5), and used for MSFE in a one-step surgical procedure. Primary objectives were feasibility and safety. The secondary objective was efficacy, evaluated by using biopsies of the augmented area taken 6 months postoperatively, concomitant with dental implant placement. Biopsies were assessed for bone, graft, and osteoid volumes. No adverse effects were reported during the procedure or follow-up (≥3 years). Bone and osteoid percentages were higher in study biopsies (SVF supplemented) than in control biopsies (ceramic only on contralateral side), in particular in β-tricalcium phosphate-treated patients. Paired analysis on the six bilaterally treated patients revealed markedly higher bone and osteoid volumes using microcomputed tomography or histomorphometric evaluations, demonstrating an additive effect of SVF supplementation, independent of the bone substitute. This study demonstrated for the first time the feasibility, safety, and potential efficacy of SVF seeded on bone substitutes for MSFE, providing the first step toward a novel treatment concept that might offer broad potential for SVF-based regenerative medicine applications.SignificanceThis is the first-in-human study using freshly isolated, autologous adipose stem cell preparations (the stromal vascular fraction [SVF] of adipose tissue) applied in a one-step surgical procedure with calcium phosphate ceramics (CaP) to increase maxillary bone height for dental implantations. All 10 patients received CaP plus SVF on one side, whereas bilaterally treated patients (6 of 10) received CaP only on the opposite side. This allowed intrapatient evaluation of the potential added value of SVF supplementation, assessed in biopsies obtained after 6 months. Feasibility, safety, and potential efficacy of SVF for bone regeneration were demonstrated, showing high potential for this novel concept.

Objectives: To evaluate the global incidence of ameloblastoma and to provide a profile of ameloblastoma patients. Material and Methods: A systematic review and meta-analysis was conducted. Searches were performed in PubMed, EMBASE, SCOPUS, and Web of Science for articles published from 1969 to 2018 for the global incidence and from 1995 to 2018 for the profile of ameloblastoma patients. Results: Seven studies on the incidence rate of ameloblastoma were included in the meta-analysis. These studies only covered Europe, Africa, and Australia. The pooled incidence rate was 0.92 per million person-years (95% CI: 0.57–1.49), with significant heterogeneity between studies. Forty-two articles provided profile data of 6,446 ameloblastoma patients. Mean age was 34 years and the peak age incidence in the third decade of life. In Europe and North America, ameloblastoma mostly occurred at an older age when compared to Africa and South America. A slight male preference (53%) was found, and the mandible appeared to be the preferred site. The most common type of ameloblastoma was multicystic. The histopathologic patterns were mostly follicular and plexiform. Conclusions: This is the first study assessing the global incidence of ameloblastoma. The pooled incidence rate was determined to be 0.92 per million person-years.

Intervertebral disk (IVD) degeneration is commonly described by loss of height and hydration. However, in the first stage of IVD degeneration, this loss has not yet occurred. In the current study, we use an ex vivo degeneration model to analyze the changes in IVDs mechanical behavior in the first phase of degeneration. We characterize these changes by stretched-exponential fitting, and suggest the fitted parameters as markers for early degeneration. Enzymatic degeneration of healthy lumbar caprine IVDs was induced by injecting 100 μL of Chondroïtinase ABC (Cabc) into the nucleus. A no-intervention and phosphate buffered saline (PBS) injected group were used as controls. IVDs were cultured in a bioreactor for 20 days under diurnal, simulated-physiological loading (SPL) conditions. Disk deformation was continuously monitored. Changes in disk height recovery behavior were quantified using stretched-exponential fitting. Disk height, histological sections, and water- and glycosaminoglycan (GAG)-content measurements were used as gold standards for the degenerative state. Cabc injection caused significant GAG loss from the nucleus and had detrimental effects on poro-elastic mechanical properties of the IVDs. These were progressive over time, with a propensity toward more linear recovery behavior. On histological sections, both PBS and Cabc injected IVDs showed moderate degeneration. A small GAG loss yields changes in IVD recovery behavior, which can be quantified with stretched-exponential fitting. Parameters changed significantly compared to control. Studies on disk degeneration and biomaterial engineering for degenerative disk disease (DDD) could benefit from focusing on IVD biomechanical behavior rather than height and water-content, as a marker for early disk degeneration.

Fateme Haghiralsadat,1–3 Ghasem Amoabediny,3–5 Samira Naderinezhad,4 Behrouz Zandieh-Doulabi,6 Tymour Forouzanfar,5 Marco N Helder5 1Department of Life Science Engineering, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran; 2Department of Orthopaedic Surgery, VU University Medical Center, MOVE Research Institute Amsterdam, Amsterdam, the Netherlands; 3Department of Nano Biotechnology, Research Center for New Technologies in Life Science Engineering, 4Department of Biotechnology and Pharmaceutical Engineering, School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran; 5Department of Oral and Maxillofacial Surgery, VU University Medical Center, MOVE Research Institute Amsterdam, 6Department of Oral Cell Biology and Functional Anatomy, Academic Center for Dentistry Amsterdam (ACTA), Vrije Universiteit Amsterdam and University of Amsterdam, MOVE Research Institute, Amsterdam, the Netherlands Purpose: Osteosarcoma (OS) mostly affects children and young adults, and has only a 20%–30% 5-year survival rate when metastasized. We aimed to create dual-targeted (extracellular against EphA2 and intracellular against JNK-interacting protein 1 [JIP1]), doxorubicin (DOX)-loaded liposomes to treat OS metastatic disease. Materials and methods: Cationic liposomes contained N-[1-(2,3-dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl-sulfate (DOTAP), cholesterol, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and distearoyl-phosphatidylethanolamine–methyl-poly(ethylene glycol) (DSPE–mPEG) conjugate. EphA2 targeting was accomplished by conjugating YSA peptide to DSPE–mPEG. Vesicles were subsequently loaded with DOX and JIP1 siRNA. Results: Characteristics assessment showed that 1) size of the bilayered particles was 109nm; 2) DOX loading efficiency was 87%; 3) siRNA could be successfully loaded at a liposome:siRNA ratio of >24:1; and 4) the zeta potential was 18.47mV. Tumor-mimicking pH conditions exhibited 80% siRNA and 50.7% DOX sustained release from the particles. Stability studies ensured the protection of siRNA against degradation in serum. OS cell lines showed increased and more pericellular/nuclear localizations when using targeted vesicles. Nontargeted and targeted codelivery caused 70.5% and 78.6% cytotoxicity in OS cells, respectively (free DOX: 50%). Targeted codelivery resulted in 42% reduction in the siRNA target, JIP1 mRNA, and 46% decrease in JIP1 levels. Conclusion: Our dual-targeted, DOX-loaded liposomes enhance toxicity toward OS cells and may be effective for the treatment of metastatic OS. Keywords: MAP kinase 8 interacting protein 1, MAPK8IP1, functionalization, cationic liposome, intracellular targeting, extracellular targeting

Bone mass is important for dental implant success and is regulated by mechanoresponsive osteocytes. We aimed to investigate the relationship between the levels and orientation of tensile strain and morphology and orientation of osteocytes at different dental implant positions in the maxillary bone. Bone biopsies were retrieved from eight patients who underwent maxillary sinus-floor elevation with β-tricalcium phosphate prior to implant placement. Gap versus free-ending locations were compared using 1) a three-dimensional finite-element model of the maxilla to predict the tensile strain magnitude and direction and 2) histology and histomorphometric analyses. The finite-element model predicted larger, differently directed tensile strains in the gap versus free-ending locations. The mean percentage of mineralised residual native-tissue volume, osteocyte number (mean ± standard deviations: 97 ± 40/region-of-interest), and osteocyte shape (~90% elongated, ~10% round) were similar for both locations. However, the osteocyte surface area was 1.5-times larger in the gap than in the free-ending locations, and the elongated osteocytes in these locations were more cranially caudally oriented. In conclusion, significant differences in the osteocyte surface area and orientation seem to exist locally in the maxillary bone, which may be related to the tensile strain magnitude and orientation. This might reflect local differences in the osteocyte mechanosensitivity and bone quality, suggesting differences in dental implant success based on the location in the maxilla.

A wide number of drug nanocarriers have emerged to improve medical therapies, and in particular to achieve controlled delivery of drugs, genes or gene expression-modifying compounds, or vaccine antigens to a specific target site. Of the nanocarriers, lipid-based and polymeric nanoparticles are the most widely used. Lipid-based systems like niosomes and liposomes are non-toxic self-assembly vesicles with an unilamellar or multilamellar structure, which can encapsulate hydrophobic/hydrophilic therapeutic agents. Polymeric nanoparticles, usually applied as micelles, are colloidal carriers composed of biodegradable polymers. Characteristics such as loading capacity, drug release rate, physical and chemical stability, and vesicle size are highly dependent on experimental conditions, and material and method choices at the time of preparation. To be able to develop effective methods for large scale production and to meet the regulatory requirements for eventual clinical implementation of nanocarriers, one needs to have in-depth knowledge of the principles of nanoparticle preparation. This review paper presents an overview of different preparation methods of polymeric and novel lipid-based (niosome and solid lipid) nanoparticles.

Supplemental Digital Content is available in the text., Background: In the human ear and nose, cartilage plays a key role in establishing its form and function. Interestingly, there is a noticeable paucity on biochemical, structural, and mechanical studies focused on facial cartilage. Such studies are needed to provide elementary knowledge that is fundamental to tissue engineering of cartilage. Therefore, in this study, a comparison is made of the biochemical, structural, and mechanical differences between ear, ala nasi, and septum on the extracellular matrix (ECM) level. Methods: Cartilage samples were harvested from 10 cadaveric donors. Each sample was indented 10 times with a nanoindenter to determine the effective Young’s modulus. Structural information of the cartilage was obtained by multiple-photon laser scanning microscopy capable of revealing matrix components at subcellular resolution. Biochemistry was performed to measure glycosaminoglycan (GAG), DNA, elastin, and collagen content. Results: Significant differences were seen in stiffness between ear and septal cartilage (P = 0.011) and between ala nasi and septal cartilage (P = 0.005). Elastin content was significantly higher in ear cartilage. Per cartilage subtype, effective Young’s modulus was not significantly correlated with cell density, GAG, or collagen content. However, in septal cartilage, low elastin content was associated with higher stiffness. Laser microscopy showed a distinct difference between ear cartilage and cartilage of nasal origin. Conclusion: Proposed methods to investigate cartilage on the ECM level provided good results. Significant differences were seen not only between ear and nasal cartilage but also between the ala nasi and septal cartilage. Albeit its structural similarity to septal cartilage, the ala nasi has a matrix stiffness comparable to ear cartilage.

Cationic liposomes have been investigated as non-viral vectors for gene delivery for more than a decade to overcome challenges associated with viral gene delivery. However, due to instability of liposomes, siRNA delivery is still a serious problem. In this study, we developed stealth PEGylated liposome formulations and focused on the effects of PEGylated liposomes on parameters related to size, zeta potential, polydispersity index, siRNA-loading efficiency and long-term stability of the siRNA-liposome complex. We were able to generate siRNA lipoplexes that could be very efficiently loaded, did not aggregate, could be stored at 4 °C for at least 6 months with only marginal release (1–5%) of siRNA and enhanced intracellular delivery of siRNA. Moreover, we could demonstrate that PEGylation positively contributed to all these parameters compared to liposomes, which were not PEGylated. The prepared lipoplex was successfully silenced J1P1 expression in MG-63 osteosarcoma cell line. In conclusion, our novel PEGylated liposomes have high potential for systemic delivery of siRNA and can improve in vivo stability of free siRNA and also siRNA lipoplexes.

Introduction Low-back pain (LBP) has been correlated to the presence of intervertebral disc (IVD) degeneration on T2-weighted (T2w) MRI. It remains challenging, however, to accurately stage degenerative disc disease (DDD) based on T2w MRI and measurements of IVD height, particularly for early DDD. Several quantitative MRI techniques have been introduced to detect changes in matrix composition signifying early DDD. In this study, we correlated quantitative T2, T1rho and Apparent Diffusion Coefficient (ADC) values to disc mechanical behavior and gold standard early DDD markers in a graded degenerated lumbar IVD caprine model, to assess their potential for early DDD detection. Methods Lumbar caprine IVDs were injected with either 0.25 U/ml or 0.5 U/ml Chondroitinase ABC (Cabc) to trigger early DDD-like degeneration. Injection with phosphate-buffered saline (PBS) served as control. IVDs were cultured in a bioreactor for 20 days under axial physiological loading. High-resolution 9.4 T MR images were obtained prior to intervention and after culture. Quantitative MR results were correlated to recovery behavior, histological degeneration grading, and the content of glycosaminoglycans (GAGs) and water. Results Cabc-injected IVDs showed aberrancies in biomechanics and loss of GAGs without changes in water-content. All MR sequences detected changes in matrix composition, with T1rho showing largest changes pre-to-post in the nucleus, and significantly more than T2 and ADC. Histologically, degeneration due to Cabc injection was mild. T1rho nucleus values correlated strongest with altered biomechanics, histological degeneration score, and loss of GAGs. Conclusions T2- and T1rho quantitative MR-mapping detected early DDD changes. T1rho nucleus values correlated better than T2 and ADC with biomechanical, histological, and GAG changes. Clinical implementation of quantitative MRI, T1rho particularly, could aid in distinguishing DDD more reliably at an earlier stage in the degenerative process.

Additive manufacturing is the process of joining materials to create objects from digital 3-dimensional (3D) model data, which is a promising technology in oral and maxillofacial surgery. The management of lost craniofacial tissues owing to congenital abnormalities, trauma, or cancer treatment poses a challenge to oral and maxillofacial surgeons. Many strategies have been proposed for the management of such defects, but autogenous bone grafts remain the gold standard for reconstructive bone surgery. Nevertheless, cell-based treatments using adipose stem cells combined with osteoconductive biomaterials or scaffolds have become a promising alternative to autogenous bone grafts. Such treatment protocols often require customized 3D scaffolds that fulfill functional and esthetic requirements, provide adequate blood supply, and meet the load-bearing requirements of the head. Currently, such customized 3D scaffolds are being manufactured using additive manufacturing technology. In this review, 2 of the current and emerging modalities for reconstruction of oral and maxillofacial bone defects are highlighted and discussed, namely human maxillary sinus floor elevation as a valid model to test bone tissue-engineering approaches enabling the application of 1-step surgical procedures and seeding of Good Manufacturing Practice-level adipose stem cells on computer-aided manufactured scaffolds to reconstruct large bone defects in a 2-step surgical procedure, in which cells are expanded ex vivo and seeded on resorbable scaffolds before implantation. Furthermore, imaging-guided tissue-engineering technologies to predetermine the surgical location and to facilitate the manufacturing of custom-made implants that meet the specific patient's demands are discussed. The potential of tissue-engineered constructs designed for the repair of large oral and maxillofacial bone defects in load-bearing situations in a 1-step surgical procedure combining these 2 innovative approaches is particularly emphasized.