Search

Background The risk of femoral neck fracture progressively increases with age. However, the reasons behind this consistent increase in the fracture risk can't be completely justified by the decrease in the bone mineral density. The objective of this study was to analyze the correlation between various bone structural features and age. Study Design & Methods A total of 29 consecutive patients who suffered an intracapsular hip fracture and underwent joint replacement surgery between May 2012 and March 2013 were included in this study. A 2 cm × 1 cm O cylindrical trabecular bone sample was collected from the femoral heads and preserved in formaldehyde. Bone mineral density (BMD), microarchitecture, organic content and crystallography were analyzed using a Dual-energy X-ray absorptiometry scan, micro-CT scan, and high resolution magic-angle-spinning-nuclear magnetic resonance (MAS-NMR), respectively. Statistical correlations were made using Spearman´s or Pearson´s correlation tests depending on the distribution of the continuous variables. Results The mean patient age was 79.83 ± 9.31 years. A moderate negative correlation was observed between age and the hydrogen content in bone (1H), which is an indirect estimate to quantify the organic matrix (r = −0.512, p = 0.005). No correlations were observed between BMD, trabecular number, trabecular thickness, phosphorous content, apatite crystal size, and age (r = 0.06, p = 0.755; r = −0.008, p = 0.967; r = −0.046, p = 0.812; r = −0.152, p = 0.430, respectively). A weak positive correlation was observed between Charlson´s comorbidity index (CCI) and c-axis of the hydroxiapatite (HA) crystals (r = −0.400, p = 0.035). Conclusion The femoral head relative protein content progressively decreases with age. BMD was not correlated with other structural bone parameters and age. Patients with higher comorbidity scores had larger HA crystals. The present results suggest that the progressive increase in the hip fracture risk in elderly patients could be partially explained by the lower bone protein content in this age group.

The stunning optical properties of upconverting nanoparticles (UCNPs) have inspired promising biomedical technologies. Nevertheless, their transfer to aqueous media is often accompanied by intense luminescence quenching, partial dissolution by water, and even complete degradation by molecules such as phosphates. Currently, these are major issues hampering the translation of UCNPs to the clinic. In this work, a strategy is developed to coat and protect β-NaYF4UCNPs against these effects, by growing a hydrophobic polymer shell (HPS) through miniemulsion polymerization of styrene (St), or St and methyl methacrylate mixtures. This allows one to obtain single core@shell UCNPs@HPS with a final diameter of≈60–70nm. Stability studies reveal that these HPSs serve as a very effective barrier, impeding polar molecules to affect UCNPs optical properties. Even more, it allows UCNPs to withstand aggressive conditions such as high dilutions (5µgmL−1), high phosphate concentrations (100mm), and high temperatures (70°C).The physicochemical characterizations prove the potential of HPSs to overcome the current limitations of UCNPs. This strategy, which can be applied to other nanomaterials with similar limitations, paves the way toward more stable and reliable UCNPs with applications in life sciences.

Purpose A new type of diazonium-based adhesive has been recently developed by our team to bind dental alloys (Titanium, stainless steel, and cobalt chromium) to dental polymers. Here, we explored the endurance of the resulting adhesive after thermal-cycling and autoclave aging. Materials and methods Polished samples of titanium (Ti), stainless steel (SS) and cobalt chromium (Co-Cr) were coated with a diazonium-based adhesive. Untreated samples served as controls (n = 12 per each condition). X-ray photoelectron spectroscopy (XPS) was performed to characterize the elemental compositions of the different surfaces. Biocompatibility of the coated alloys was assessed with human gingival fibroblasts (HGF). Inductively coupled plasma (ICP) and total organic carbon (TOC) analyses were used to quantify the ions and organic matters released from the diazonium coated alloys. Endurance of the adhesives was assessed by exposing the samples to autoclaving and thermal-cycling. The tensile strength of the poly(methylmethacrylate) (PMMA)-alloy bond was also tested. Results Results of mechanical testing demonstrated a higher endurance of the coated CoCr, Ti, and SS compared to the uncoated alloys. The human fibroblasts cultured on the substrates remained alive and metabolically active, and the coatings did not release significant amounts of toxic chemicals in solutions. Conclusions The results further support the use of diazonium-based adhesives as new coupling agents for dental applications.

Superparamagnetic iron nanoparticles (SPIONs) have become one of the most useful colloidal systems in nanomedicine. We report here the preparation of new hybrid core@shell systems based on SPION nanoparticles coated with a SiO

During the last four decades, the use of nanoparticles has become an important topic in the fields of nanotechnology. Their potential applications in high diversity areas of research make them practically irreplaceable tools in medicine, biomaterials, catalysis, etc. There are countless methods to afford nanoparticles; however, the reduction of ionic species into atomic material is probably one of the most used pathways to generate nanoparticles in a consistent and controlled manner. In the chemical and biological bottom–up approach, the soluble material is reduced to insoluble atomic clusters which grow until a nanoparticle dispersion occurs. For carrying out these kinds of processes, reagents from multiple sources and different intrinsic properties can be used, thanks to their redox potential. This introductory chapter aims to describe the main redox agents used for the colloidal nanoparticle synthesis, from the most classical to the newest chemistry pathways.

This work reports the study of ZnO-based anodes for the photoelectrochemical regeneration of the oxidized form of nicotinamide adenine dinucleotide (NAD+). The latter is the most important coenzyme for dehydrogenases. However, the high costs of NAD+ limit the use of such enzymes at the industrial level. The influence of the ZnO morphologies (flower-like, porous film, and nanowires), showing different surface area and crystallinity, was studied. The detection of diluted solutions (0.1 mM) of the reduced form of the coenzyme (NADH) was accomplished by the flower-like and the porous films, whereas concentrations greater than 20 mM were needed for the detection of NADH with nanowire-shaped ZnO-based electrodes. The photocatalytic activity of ZnO was reduced at increasing concentrations of NAD+ because part of the ultraviolet irradiation was absorbed by the coenzyme, reducing the photons available for the ZnO material. The higher electrochemical surface area of the flower-like film makes it suitable for the regeneration reaction. The illumination of the electrodes led to a significant increase on the NAD+ regeneration with respect to both the electrochemical oxidation in dark and the only photochemical reaction. The tests with formate dehydrogenase demonstrated that 94% of the regenerated NAD+ was enzymatically active.

11 pags., 7 figs., 1 tab., In this work, we present a luminescence platform that can be used as point of care system for determining the presence and concentration of specific oligonucleotide sequences. This sensor exhibited a limit of detection as low as 50 fM by means of: (i) the use of single-stranded DNA (ssDNA) functionalized magnetic microparticles that captured and concentrated ssDNA-upconverting nanoparticles (ssDNA-UCNPs) on a solid support, when the target sequence (miR-21-5p DNA-analogue) was in the sample, and (ii) a photoligation reaction that covalently linked the ssDNA-UCNPs and the ssDNA magnetic microparticles, allowing stringent washes. The presented sensor showed a similar limit of detection when the assays were conducted in samples containing total miRNA extracted from human serum, demonstrating its suitability for detecting small specific oligonucleotide sequences under real-like conditions. The strategy of combining UCNPs, magnetic microparticles, and a photoligation reaction provides new insight into low-cost, rapid, and ultra-sensitive detection of oligonucleotide sequences., This work was supported by Ministerio de Economía y Competi- tividad (MAT2017-83111R and PID2019-106820RB-C21), Ministerio de Ciencia, Innovacion, y Universidades (MICINN, RTI2018-094859) and Comunidad de Madrid (B2017/BMD-3867 RENIM-CM) co-financed by European Structural and Investment Fund. D.M.G. thanks UCM-Santander for a predoctoral contract (CT17/17- CT18/17) and a Postdoctoral Orientation Period (POP) contract. P. S. I. thanks CONICYT for a predoctoral contract (N° 21161052). F. V. D. thanks to European Commission for a YEI program contract (PEJD-2018-PRE/IND-9118). TEM images were obtained at the National Center for Electron Microscopy (UCM, Madrid) facility

Advanced materials interfaces 10(16), 2100915 (2021). doi:10.1002/admi.202100915, Published by Wiley-VCH, Weinheim

Zinc oxide nanoparticles (ZnO NPs) are currently among the most promising nanomaterials for theranostics. However, they suffer from some drawbacks that could prevent their application in nanomedicine as theranostic agents. The doping of ZnO NPs can be effectively exploited to enhance the already-existing ZnO properties and introduce completely new functionalities in the doped material. Herein, we propose a novel synthetic approach for iron-doped ZnO (Fe:ZnO) NPs as a multifunctional theranostic nanoplatform aimed at cancer cell treatment. Pure ZnO and Fe:ZnO NPs, with two different levels of iron doping, were synthesized by a rapid wet-chemical method and analyzed in terms of morphology, crystal structure and chemical composition. Interestingly, Fe:ZnO NPs featured bioimaging potentialities thanks to superior optical properties and novel magnetic responsiveness. Moreover, iron doping provides a way to enhance the electromechanical behavior of the NPs, which are then expected to show enhanced therapeutic functionalities. Finally, the intrinsic therapeutic potentialities of the NPs were tested in terms of cytotoxicity and cellular uptake with both healthy B lymphocytes and cancerous Burkitt’s lymphoma cells. Furthermore, their biocompatibility was tested with a pancreatic ductal adenocarcinoma cell line (BxPC-3), where the novel properties of the proposed iron-doped ZnO NPs can be potentially exploited for theranostics.

Smart nanoparticles for medical applications have gathered considerable attention due to an improved biocompatibility and multifunctional properties useful in several applications, including advanced drug delivery systems, nanotheranostics and in vivo imaging. Among nanomaterials, zinc oxide nanoparticles (ZnO NPs) were deeply investigated due to their peculiar physical and chemical properties. The large surface to volume ratio, coupled with a reduced size, antimicrobial activity, photocatalytic and semiconducting properties, allowed the use of ZnO NPs as anticancer drugs in new generation physical therapies, nanoantibiotics and osteoinductive agents for bone tissue regeneration. However, ZnO NPs also show a limited stability in biological environments and unpredictable cytotoxic effects thereof. To overcome the abovementioned limitations and further extend the use of ZnO NPs in nanomedicine, doping seems to represent a promising solution. This review covers the main achievements in the use of doped ZnO NPs for nanomedicine applications. Sol-gel, as well as hydrothermal and combustion methods are largely employed to prepare ZnO NPs doped with rare earth and transition metal elements. For both dopant typologies, biomedical applications were demonstrated, such as enhanced antimicrobial activities and contrast imaging properties, along with an improved biocompatibility and stability of the colloidal ZnO NPs in biological media. The obtained results confirm that the doping of ZnO NPs represents a valuable tool to improve the corresponding biomedical properties with respect to the undoped counterpart, and also suggest that a new application of ZnO NPs in nanomedicine can be envisioned.

12 p.-5 fig., Optical probes operating in the second near-infrared window (NIR-II, 1,000-1,700 nm), where tissues are highly transparent, have expanded the applicability of fluorescence in the biomedical field. NIR-II fluorescence enables deep-tissue imaging with micrometric resolution in animal models, but is limited by the low brightness of NIR-II probes, which prevents imaging at low excitation intensities and fluorophore concentrations. Here, we present a new generation of probes (Ag2S superdots) derived from chemically synthesized Ag2S dots, on which a protective shell is grown by femtosecond laser irradiation. This shell reduces the structural defects, causing an 80-fold enhancement of the quantum yield. PEGylated Ag2S superdots enable deep-tissue in vivo imaging at low excitation intensities (, Authors thank Dr A. Benayas (CICECO, U. Aveiro, Portugal), Prof G. Lifante and Prof J. García Sole (UAM) for helpful discussions. This work has been founded by Ministerio de Economı́a y Competitividad-MINECO (MAT2017-83111R and MAT2016-75362-C3-1-R) and the Comunidad de Madrid (B2017/BMD-3867 RENIM-CM) co-financed by European Structural and Investment Fund. D.M.-G. thanks UCM-Santander for a predoctoral contract (CT17/17-CT18/17). We thank the staff at the ICTS-National Centre for Electron Microscopy at the UCM for the help in the electron microscopy studies and C.M. at the beamline BL22-CLAESS of the Spanish synchrotron ALBA for his help in the XANES experiments. We also thank J.G.I at the Ultrafast Laser Laboratory at UCM for his help and fruitful discussion. Y.S. acknowledges the support from the China Scholarship Council (CSC File No. 201806870023). Additional funding was provided by the European Commission Horizon 2020 project NanoTBTech, the Fundación para la Investigación Biomédica del Hospital Universitario Ramón y Cajal project IMP18_38 (2018/0265). Ajoy K. Kar and Mark D. Mackenzie acknowledge support from the UK Engineering and Physical Sciences Research Council (Project CHAMP, EP/M015130/1). C. Jacinto thanks the financial support of the Brazilian agencies: CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico) through the grants: Projeto Universal Nr. 431736/2018-9 and Scholarship in Research Productivity 1C under the Nr. 304967/20181; FINEP (Financiadora de Estudos e Projetos) through the grants INFRAPESQ-11 and INFRAPESQ-12; FAPEAL (Fundação de Amparo à Pesquisa do Estado de Alagoas) grant Nr. 1209/2016. H. D. A. Santos was supported by a graduate studentship from CNPq and by a sandwich doctoral program (PDSE-CAPES) developed at Universidad Autonoma de Madrid, Spain, Project Nr. 88881/2016-01.

The discovery of novel catalytic materials showing unprecedented properties and improved functionalities represents a major challenge to design advanced oxidation processes for wastewater purification. In this work, antimony (Sb) doping is proposed as a powerful approach for enhancing the photo- and piezocatalytic performances of piezoelectric zinc oxide (ZnO) thin films. To investigate the role played by the dopant, the degradation of Rhodamine-β (Rh-β), a dye pollutant widely present in natural water sources, is studied when the catalyst is irradiated by ultraviolet (UV) light or ultrasound (US) waves. Depending on the doping level, the structural, optical, and ferroelectric properties of the catalyst can be properly set to maximize the dye degradation efficiency. Independently of the irradiation source, the fastest and complete dye degradation is observed in the presence of the doped catalyst and for an optimal amount of the inserted dopant. Among ZnO:Sb samples, the most doped one (5 at. %) shows improved UV light absorption and photocatalytic properties. Conversely, the piezocatalytic efficiency is maximized using the lowest Sb amount (1 at. %). The superior ferroelectric polarization observed in this case highly favors the adsorption of electrically charged species, in particular of the dye in the protonated form (Rh-β+) and of OH-, to the catalyst surface and the production of hydroxyl radicals responsible for dye degradation.

Metallic nanostructures have the potential to modify the anti-Stokes emission of upconverting nanoparticles (UCNPs) by coupling their plasmon resonance with either the excitation or the emission wavelength of the UCNPs. In this regard gold nanoparticles (AuNPs) have often been used in sensors for UCNP luminescence quenching or enhancement, although systematic studies are still needed in order to design optimal UCNP-AuNP based biosensors. Amidst mixed experimental evidence of quenching or enhancement, two key factors arise: the nanoparticle distance and nanoparticle size. In this work, we synthesize AuNPs of different sizes to assess their influence on the luminescence of UCNPs. We find that strong luminescence quenching due to resonance energy transfer is preferentially achieved for small AuNPs, peaking at an optimal size. A further increase in the AuNP size is accompanied by a reduction of luminescence quenching due to an incipient plasmonic enhancement effect. This enhancement counterbalances the luminescence quenching effect at the biggest tested AuNP size. The experimental findings are theoretically validated by studying the decay rate of the UCNP emitters near a gold nanoparticle using both a classical phenomenological model and the finite-difference time-domain method. Results from this study establish general guidelines to consider when designing sensors based on UCNPs-AuNPs as donor-quencher pairs, and suggest the potential of plasmon-induced luminescence enhancement as a sensing strategy.

In this work, we explore a photochemical ligation reaction to covalently modify oligonucleotide-conjugated upconverting nanoparticles (UCNPs) in the presence of a specific target DNA sequence. The target sequence acts as a hybridization template, bringing together a biotinylated photoactivatable oligonucleotide probe and the oligonucleotide probe that is attached to UCNPs. The illumination of the UCNPs by NIR light to generate UV emission internally or illuminating the photoactivatable probe directly by an external UV light promotes the photochemical ligation reaction, yielding covalently biotin functionalized UCNPs that can be selectively captured in streptavidin-coated microwells. Following this strategy, we developed a DNA sensor with a limit of detection of 1 × 10-18 mol per well (20 fM). In addition, we demonstrate the possibility to create UCNP patterns on the surface of solid supports upon NIR illumination that are selectively formed under the presence of the target oligonucleotide.

Oral hygiene and regular maintenance are crucial for preserving good peri-implant health. However, available prophylaxis products and toothpastes, which are optimized for cleaning teeth, tend to contaminate and abrade implant surfaces due to their organic components and silica microparticles, respectively. This study aims to develop an organic-free implant-paste based on two-dimensional nanocrystalline magnesium phosphate gel and hydrated silica nanoparticles (20-30% w/w) for cleaning oral biofilm on titanium dental implants. The surface chemistry, morphology, and bacterial load of contaminated Ti disks before and after decontamination using prophylaxis brushing with toothpaste and implant-paste were characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and fluorescence spectroscopy. Both commercial toothpastes and implant-paste remove bacteria, however, only implant-paste protects Ti metal from abrasion and removes organic contaminants. XPS showed a significant decrease of carbon contamination from 73% ± 2 to 20% ± 2 after mechanical brushing with implant-paste compared to 41% ± 11 when brushing with commercial toothpastes (p

Forster resonant energy transfer (FRET) with upconverting nanoparticles (UCNPs) as donors and quantum dots (QDs) as acceptors has been regarded as a promising tool for biosensing applications. In this work, we use time-resolved luminescence spectroscopy to analyze the UCNP-to-QD FRET and we focus on the most relevant parameter of the FRET phenomenon, UCNP–QD distance. This distance is controlled by a nanometric silica shell around the UCNP surface. We theoretically reproduce the experimental results applying FRET theory to the distribution of emitting erbium ions in the UCNP. This simple model allows us to estimate the contribution of every erbium ion to the final FRET response and to explore different strategies to improve FRET efficiency.

Purpose This research aimed to assess whether pink-shaded anodized surfaces could enhance the adhesion of soft tissue cells compared with untreated machined titanium surfaces. Materials and methods Two types of Ti-Al-V titanium samples were prepared: machined titanium (Ti) and anodized titanium (AnoTi). The microstructure was studied by means of a scanning electron microscope. X-ray photoelectron spectroscopy (XPS) was carried out as well. The wetting properties were investigated by the sessile drop technique with water and diiodomethane. To investigate the biologic response in vitro, the epithelial cell line HaCaT and the fibroblastic cell line NHDF were used. Cell adhesion, morphology, and proliferation were evaluated. Results The microstructure of the tested surfaces was irregularly smooth for both types of samples with no relevant morphologic differences. The XPS and HR-XPS performed on the AnoTi samples confirmed the presence of Ti, O, and C, along with Ti oxides. Following the optical contact angle measurements, the anodization process induced a slight transition toward the hydrophobic regime. Consequently, the surface free energy values differed significantly between the anodized and the machined samples. Anodized Ti significantly increased the adhesion and proliferation of both epithelial cells and fibroblasts when compared with the pristine Ti controls. Conclusion Compared with the clinical standard, anodized surfaces could enhance the adhesion of the two major cell types within the peri-implant soft tissues, which makes pink anodization a promising option for implant dentistry.

Silicon-based materials present a high potential for dental implant applications, since silicon has been proven necessary for the correct bone formation in animals and humans. Notably, the addition of silicon is effective to enhance the bioactivity of hydroxyapatite and other biomaterials. The present work aims to expand the knowledge of the role exerted by hydrogen in the biological interaction of silicon-based materials, comparing two hydrogenated amorphous silicon coatings, with different hydrogen content, as means to enhance soft tissue cell adhesion. To accomplish this task, the films were produced by plasma enhanced chemical vapor deposition (PECVD) on titanium substrates and their surface composition and hydrogen content were analyzed by means of X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectrophotometry (FTIR) respectively. The surface energy and roughness were measured through optical contact angle analysis (OCA) and high-resolution mechanical profilometry respectively. Coated surfaces showed a slightly lower roughness, compared to bare titanium samples, regardless of the hydrogen content. The early cell responses of human keratinocytes and fibroblasts were tested on the above mentioned surface modifications, in terms of cell adhesion, viability and morphometrical assessment. Films with lower hydrogen content were endowed with a surface energy comparable to the titanium surfaces. Films with higher hydrogen incorporation displayed a lower surface oxidation and a considerably lower surface energy, compared to the less hydrogenated samples. As regards mean cell area and focal adhesion density, both a-Si coatings influenced fibroblasts, but had no significant effects on keratinocytes. On the contrary, hydrogen-rich films increased manifolds the adhesion and viability of keratinocytes, but not of fibroblasts, suggesting a selective biological effect on these cells.