Search

This study compares the clinical performances of two lithium disilicate (Initial LiSi press vs. Initial LiSi Block, GC Corp.) and a 3D printed resin (Temp Print, GC Corp.) partial crown using modified United States Public Health Service (USPHS) evaluation criteria and survival rates after one year of clinical service. Eighty-nine partial adhesive restorations on posterior teeth were realized using different materials: Group 1 used Initial LiSi press, Group 2 used Initial LiSi Block, and Group 3 used Temp Print. An analog workflow was used to realize the restoration of Group 1, while a fully digital workflow was used for Groups 2 and 3. The modified USPHS parameters, together with periodontal parameters, were collected at baseline and at the one-year recall. Contingency tables to assess for significant differences of success over time in each group were used. All modified USPHS parameters showed Alpha or Bravo; no Charlie was recorded. No statistically significant difference emerged between the three groups in any of the assessed variables (p > 0.05). All modified USPHS scores were compatible with the outcome of clinical success, no restoration was replaced or repaired, and the survival rate was 100% at the one-year recall. No difference was found between the traditional and digital workflows used to fabricate the restorations.

The main objectives of the present prospective clinical study were to evaluate the survival and success rates of implant-supported zirconia single crowns fabricated with a full digital workflow for the rehabilitation of mono- and bilateral agenesis of maxillary lateral incisors after 2 years of clinical function; biological and technical parameters affecting the prosthetic restorations were recorded, as well as the patient-satisfaction score. Twenty-two patients showing mono- or bilateral agenesis of the maxillary lateral incisors were included in this study, and a total of 30 narrow-diameter implants were inserted. Thirty screw-retained monolithic cubic zirconia single crowns with internal connections were fabricated. Objective outcome evaluations were performed by means of the Functional Implant Prosthodontic Score, whereas the patient-satisfaction score was evaluated using Visual Analog Scales. Descriptive statistics were performed and the Kaplan–Meier analysis was run to analyze time-to-event data. After 2 years of clinical function, the overall FIPS found in the present study was 9.2, whereas the average patient-satisfaction score was 8.7. The Kaplan–Meier analysis at the 2-year follow-up reported a cumulative survival rate of 100% and a cumulative success rate of 93.3%. The implant-prosthetic rehabilitation with a full digital workflow proved to be an effective and reliable procedure for the functional and aesthetic treatment of the agenesis of maxillary lateral incisors in the short-term. Clinical investigations with wider sample populations and longer observational follow-ups could be useful to validate, in the long-term, the clinical outcomes of the present prospective clinical study.

The article analyses the political performance of the technical object “algorithm” by drawing on Gilbert Simondon's philosophy of technics. The first part studies the reduction of society and politics to the automatic functioning typical of algorithmic governmentality, tracking it back to the ideological assumptions implicit in the cybernetic model of the automaton. The second part shows that only a critique of such model allows for a departure from those assumptions and for the theorisation of algorithmic technology in view of a possible government of algorithms.

Pressed lithium disilicate is largely used for veneer manufacturing, but a new block formulation has recently been released on the market. This study evaluated the clinical performance of milled lithium disilicate veneers (LiSi Block, GC Co., Tokyo, Japan) realized with a fully digital or hybrid workflow using modified United States Public Health Service (USPHS) evaluation criteria and survival rates after 24 months of clinical service together with the patient’s satisfaction using the Visual Analog Scale (VAS). A total of 105 veneers on natural anterior teeth were made on twenty-nine patients with LiSi Block (GC, Tokyo, Japan). Patients were randomly divided into three groups: Group 1, 35 veneers realized with a completely digital workflow using Trios 3 (3Shape A/S, Copenhagen, Denmark); Group 2, 35 veneers realized with a completely digital workflow using Experimental IOS (GC, Tokyo, Japan); and Group 3, 35 veneers realized with a hybrid workflow. The restorations were followed up for 24 months, and the modified USPHS evaluation was performed at baseline, 12 months, and 24 months together with periodontal evaluation. Repeated measures two-way ANOVA and the Tukey test were applied to compare the modified USPHS method values (α = 0.05). STATISTICA 10.0 software and SIGMAPLOT 12.0 software were used to perform statistical analysis. There were no statistically significant differences between the three groups and with the interaction of group vs. time periods. The satisfaction scores of 7.35 ± 1.8 and 9.4 ± 0.37 were recorded before and after treatment, respectively. Milled lithium disilicate veneers showed a good clinical outcome after 2 years of clinical service. No difference was found between fully digital or hybrid workflow.

ABSTRACTThis 1:30,000 scale geological map describes Oxia Planum, Mars, the landing site for the ExoMars Rosalind Franklin rover mission. The map represents our current understanding of bedrock units and their relationships prior to Rosalind Franklin’s exploration of this location. The map details 15 bedrock units organised into 6 groups and 7 textural and surficial units. The bedrock units were identified using visible and near-infrared remote sensing datasets. The objectives of this map are (i) to identify where the most astrobiologically relevant rocks are likely to be found, (ii) to show where hypotheses about their geological context (within Oxia Planum and in the wider geological history of Mars) can be tested, (iii) to inform both the long-term (hundreds of metres to ∼1 km) and the short-term (tens of metres) activity planning for rover exploration, and (iv) to allow the samples analysed by the rover to be interpreted within their regional geological context.

Background: Reconstruction of mandibular bone defects is a surgical challenge, and microvascular reconstruction is the current gold standard. The field of tissue bioengineering has been providing an increasing number of alternative strategies for bone reconstruction.Methods: In this preclinical study, the performance of two bioengineered scaffolds, a hydrogel made of polyethylene glycol-chitosan (HyCh) and a hybrid core-shell combination of poly (L-lactic acid)/poly (ε-caprolactone) and HyCh (PLA-PCL-HyCh), seeded with different concentrations of human mesenchymal stromal cells (hMSCs), has been explored in non-critical size mandibular defects in a rabbit model. The bone regenerative properties of the bioengineered scaffolds were analyzed by in vivo radiological examinations and ex vivo radiological, histomorphological, and immunohistochemical analyses.Results: The relative density increase (RDI) was significantly more pronounced in defects where a scaffold was placed, particularly if seeded with hMSCs. The immunohistochemical profile showed significantly higher expression of both VEGF-A and osteopontin in defects reconstructed with scaffolds. Native microarchitectural characteristics were not demonstrated in any experimental group.Conclusion: Herein, we demonstrate that bone regeneration can be boosted by scaffold- and seeded scaffold-reconstruction, achieving, respectively, 50% and 70% restoration of presurgical bone density in 120 days, compared to 40% restoration seen in spontaneous regeneration. Although optimization of the regenerative performance is needed, these results will help to establish a baseline reference for future experiments.

The effectiveness of Volterra equalization (VE) is analyzed to improve the performance of a metropolitan area network (MAN), characterized by directly-modulated (DM) vertical-cavity surface-emitting laser (VCSEL) sources combined with coherent detection, in order to target both high capacity and hundreds of km reaches. VE, which is a well-known nonlinear equalization technique, is used to cope not only with the distortion introduced by the real implementation of direct discrete multi-tone (DMT) modulation of the VCSEL, but also with the nonlinear impairments. A suitable experimentation, in case of 25-GHz spaced dense wavelength division multiplexed (DWDM) propagation, allows to validate a simulation tool, developed to provide a systematic analysis of the supported capacity per VCSEL, with and without VE. Simulations permit to analyze the effects of VE for different channel spacings (25, 50 and $100\,$ GHz) and for different standard single-mode fiber (SSMF) lengths (up to $200\,$ km), focusing on the evolution of the capacity per channel in case of different launch powers and optical signal-to-noise ratios. The dependence of the VE effectiveness is evaluated also in terms of spectral behavior. VE allows to achieve up to 13%-capacity increase, assuring 50 Gb/s rate per polarization per VCSEL, in case of DWDM transmission and after 200-km propagation, as targeted by the considered MAN applications.

Information reconciliation (IR) is a key step in quantum key distribution (QKD). In recent years, blind reconciliation based on low-density parity-check (LDPC) codes has replaced Cascade as a standard de facto since it guarantees efficient IR without a priori quantum bit error rate estimation and with limited interactivity between the parties, which is essential in high key-rate and long-distance QKD links. In this article, a novel blind reconciliation scheme based on rateless protograph LDPC codes is proposed. The rate adaptivity, essential for blind reconciliation, is obtained by progressively splitting LDPC check nodes, which ensures a number of degrees of freedom larger than puncturing in code design. The protograph nature of the LDPC codes allows us to use the same designed codes with a large variety of sifted-key lengths, enabling block length flexibility, which is important in largely varying key-rate link conditions. The code design is based on a new protograph discretized density evolution tool.

Human coronaviruses are a continuous threat to the human population and have limited antiviral treatments, and the recent COVID-19 pandemic sparked interest in finding new antiviral strategies, such as natural products, to combat emerging coronaviruses. Rapid efforts in the scientific community to identify effective antiviral agents for coronaviruses remain a focus to minimize mortalities and global setbacks. In this study, an essential oil derived from Myrtus communis L. (MEO) is effective against HCoV-229E and HCoV-OC43 virus infections in comparison to two FDA-approved drugs, Remdesivir and Nirmatrelvir. Gas-chromatography and mass spectrometry were used to identify the chemical composition of MEO. Slight antioxidant activity was observed in MEO, indicating a role in oxidative stress. A dose–response curve measuring the EC50 indicates a high potency against HCoV-229E and HCoV-OC43 virus infections on Huh7.5 cells with low cytotoxicity using a PrestoBlue cell viability assay. Our findings demonstrate that MEO exhibits potent antiviral activity against HCoV-229E and HCoV-OC43 on Huh7.5 cells within a low-cytotoxicity range, but not on SARS-CoV-2. Artificial bacterial chromosome plasmids that expressed SARS-CoV-2 used for replicon—to determine viral replication and viral assembly/egress on HEK293T/17 cells—and virus-like particles on Huh7.5-AT cells—to determine viral entry and assembly/egress—showed no antiviral activity with MEO in comparison to Remdesivir. This study reveals the potential effectiveness of MEO as an alternative natural remedy to treat human coronaviruses and a potential antiviral agent for future coronavirus infections.

Background: Response to antipsychotics is subject to a wide interindividual variability, due to genetic and non-genetic factors. Several single nucleotide polymorphisms (SNPs) have been associated with response to antipsychotics in genome-wide association studies (GWAS). Polygenic risk scores (PRS) are a powerful tool to aggregate into a single measure the small effects of multiple risk alleles.Materials and methods: We studied the association between a PRS composed of SNPs associated with response to antipsychotics in GWAS studies (PRSresponse) in a real-world sample of patients (N = 460) with different diagnoses (schizophrenia spectrum, bipolar, depressive, neurocognitive, substance use disorders and miscellaneous). Two other PRSs composed of SNPs previously associated with risk of schizophrenia (PRSschizophrenia1 and PRSschizophrenia2) were also tested for their association with response to treatment.Results: PRSresponse was significantly associated with response to antipsychotics considering the whole cohort (OR = 1.14, CI = 1.03–1.26, p = 0.010), the subgroup of patients with schizophrenia, schizoaffective disorder or bipolar disorder (OR = 1.18, CI = 1.02–1.37, p = 0.022, N = 235), with schizophrenia or schizoaffective disorder (OR = 1.24, CI = 1.04–1.47, p = 0.01, N = 176) and with schizophrenia (OR = 1.27, CI = 1.04–1.55, p = 0.01, N = 149). Sensitivity and specificity were sub-optimal (schizophrenia 62%, 61%; schizophrenia spectrum 56%, 55%; schizophrenia spectrum plus bipolar disorder 60%, 56%; all patients 63%, 58%, respectively). PRSschizophrenia1 and PRSschizophrenia2 were not significantly associated with response to treatment.Conclusion: PRSresponse defined from GWAS studies is significantly associated with response to antipsychotics in a real-world cohort; however, the results of the sensitivity-specificity analysis preclude its use as a predictive tool in clinical practice.

Background: The reduction in joint load is a potential beneficial factor in managing osteoarthritis of the temporomandibular joint (TMJ). This paper aims to compare the effectiveness of the intramuscular injection of botulinum toxin (BTX-A) as an adjunct to TMJ arthrocentesis plus viscosupplementation with arthrocentesis plus viscosupplementation alone in the management of TMJ osteoarthritis. Methods: A pilot clinical retrospective study examined TMJ osteoarthritis treatments. Patients were divided into two groups: Group A received BTX-A injections and arthrocentesis with viscosupplementation, while Group B received only arthrocentesis with viscosupplementation. The study assessed outcomes based on mouth opening (MO), pain at rest (PR), pain at mastication (PF), and masticatory efficiency (ME) at various time points (baseline (T0), 1 week (T1), 2 weeks (T2), 3 weeks (T3), and 4 weeks (T4)) up to 2 months after treatment. Results: The study included two groups, each with five patients. Group A received five weekly sessions of arthrocentesis plus viscosupplementation and a single BTX-A injection during the first arthrocentesis appointment. Group B underwent the five-session protocol of arthrocentesis plus viscosupplementation alone. MO, PF, PR, and ME improved quickly in T2 in both groups, but the improvement was of greater importance over the following weeks and lasted longer in Group A. Conclusions: Arthrocentesis with viscosupplementation associated with BTX-A was found to be more effective than arthrocentesis alone in improving clinical outcomes. This suggests that patients with TMJ osteoarthritis and myofascial pain may benefit from reduced muscle tone and joint load.

The treatment landscape for metastatic renal cell carcinoma (mRCC) has undergone significant transformations in recent years. The introduction of novel combination therapies involving tyrosine kinase inhibitors (TKI) and immune checkpoint inhibitors has resulted in improved oncological outcomes compared to traditional TKI monotherapy. In this evolving paradigm, the pivotal role of the multidisciplinary tumor board is underscored, particularly in shaping the therapeutic trajectory for patients eligible for locoregional interventions like cytoreductive nephrectomy and metastasectomy. In cases where systemic treatment is deemed appropriate, the absence of direct comparisons among the various combination therapies complicates the selection of a first-line approach. The clinician is faced with the challenge of making decisions based on patient-specific factors such as performance status, risk classification according to the International Metastatic Renal Cell Carcinoma Database Consortium, comorbidities, and disease characteristics, including the number and location of metastases and tumor histology. Considering these concerns, we propose, as a member of a Tuscany Interdisciplinary Uro-Oncologic Group, an algorithm to streamline the decision-making process for mRCC patients, offering guidance to clinicians in their day-to-day clinical practice.

The push for environmental sustainability has accelerated the acceptance of electric vehicles, as well as the exploration of electrified Non-Road Mobile Machinery. This study emphasizes the challenges of electrifying off-highway machinery, which include the many machinery layouts and the presence of Small- and Medium-sized Enterprises in the market. Recognizing the barriers faced by these companies, this paper shows how modeling and simulation can be effective tools for system integration and control optimization, even when lacking extensive expertise in the topic. However, it emphasizes the need for user-friendly modeling tools and methods adaptable to the operational needs of Small- and Medium-sized Enterprises. This study presents a case study of a retrofitted battery-electric hydraulic material handler. The machinery is simulated using Simscape, and the accuracy of the model is confirmed through experimental validation. By simulating a rational duty cycle, this study proposes two solutions for performance enhancement while maintaining the integrity of the hydraulic system. These solutions offer a balanced compromise between energy consumption and productivity and a novel control algorithm to minimize energy consumption. Most importantly, the two proposed solutions can be easily switched by the operator, which can decide to favor productivity over energy saving based on driving needs.

This report describes acidic microbial mats containing cyanobacteria that are strongly associated to precipitated minerals in the source area of Río Tinto. Río Tinto (Huelva, Southwestern Spain) is an extreme acidic environment where iron and sulfur cycles play a fundamental role in sustaining the extremely low pH and the high concentration of heavy metals, while maintaining a high level of microbial diversity. These multi-layered mineral deposits are stable all year round and are characterized by a succession of thick greenish-blue and brownish layers mainly composed of natrojarosite. The temperature and absorbance above and below the mineral precipitates were followed and stable conditions were detected inside the mineral precipitates. Different methodologies, scanning and transmission electron microscopy, immunological detection, fluorescence in situ hybridization, and metagenomic analysis were used to describe the biodiversity existing in these microbial mats, demonstrating, for the first time, the existence of acid-tolerant cyanobacteria in a hyperacidic environment of below pH 1. Up to 0.46% of the classified sequences belong to cyanobacterial microorganisms, and 1.47% of the aligned DNA reads belong to the Cyanobacteria clade.

Cavitating lung tumors occur in approximately 10-15% of the patients, are more commonly associated with squamous histology, and are typically located in the lung parenchyma. Herein we describe an exceedingly rare series of 5 patients, 4 of whom treatment-naïve, whose tumor caused the disruption of the normal airway anatomy at the level of lobar or segmental bronchi, leading to the formation of an endoscopically-visible cavity which ended up in the lung parenchyma or even into the pleural space. Sex (3 males, 2 females), smoking habit (2 never smokers, 2 former smokers, 1 current smoker), and histology (3 adenocarcinoma, 2 squamous cell carcinoma) were heterogeneous, but the 4 patients treatment-naïve presented with metastatic disease, poor ECOG performance status, similar clinical complaints of long duration, and lack of actionable mutations. The only patient who exhibited a meaningful response to treatment had the lowest symptoms’ duration, the smallest size of the cavitated mass, and the best performance status at the time of diagnosis. This series provides the first comprehensive description of a rare presentation of lung cancer characterized by similar clinical complaints, delayed diagnosis and poor prognosis.

The possibility to steer floating cells dispersed in water by means of flexural plate waves (FPWs) generated by a 9 mm $\times9$ mm piezoelectric MEMS transducer has been explored. The MEMS transducer has a squared cavity etched out in a silicon substrate formed by a 6 mm $\times6$ mm composite diaphragm made of a piezoelectric aluminum nitride (AlN) layer on top of a doped silicon plate. The piezoelectric layer can be electrically actuated by means of metal interdigital transducers (IDTs) placed over the AlN film at the diaphragm edges. Cell alignment has been sought for by inducing standing FPWs in the diaphragm and in the contacting water layer in the cavity by the one-dimensional (1D) acoustic field pattern obtained by exciting two IDTs located symmetrically with respect to the diaphragm centre. The working principle has been validated by means of 2D finite element modelling and simulations. The MEMS transducer has been fabricated using the PiezoMUMPs process and experimentally tested by exploiting a tailored front-end electronic circuit. Inactive fibroblast cells with an approximate diameter of $15~\mu \text{m}$ have been dispersed in demineralized water within the cavity at a concentration in the order of 105 cells/ml. By applying sinusoidal excitation signals to faced IDTs with zero phase shift and peak amplitude of 10 V, lines of cells spaced by half wavelength $\lambda $ /2 = $56~\mu \text{m}$ have been achieved at 12.5 MHz, in good agreement with theoretical predictions and simulation results.

Abstract Background Pulmonary arterial hypertension is a progressive, debilitating condition characterized by increased resistance in the pulmonary arterial circulation. Current treatments for pulmonary arterial hypertension include endothelin receptor antagonists such as bosentan, sitaxentan, ambrisentan, macitentan, and oral prostacyclin receptor agonists such as selexipag. Endothelin receptor antagonists have been associated with liver injury, while hepatotoxicity was not reported for selexipag. Although genetic variability has been indisputably associated with variability in drug response, no study has been designed until now to assess its effects on the pharmacokinetics of endothelin receptor antagonists or selexipag. Case presentation We report the case of a 58-year-old female Caucasian patient with a dramatic increase in plasma levels of transaminases after treatment with macitentan and selexipag, drugs whose risk of causing liver injury has so far been considered limited. After therapy discontinuation, plasma levels of transaminases returned to baseline, thus suggesting a role of these drugs in the observed hepatotoxicity. After pharmacological counseling, we decided to introduce ambrisentan for the patient’s treatment. After 7 months of treatment, no liver injury has been reported. To evaluate the role of genetic factors in the observed hepatotoxicity, we genotyped the patient for single-nucleotide polymorphisms previously associated with macitentan, ambrisentan, or selexipag metabolism. We found a genetic profile associated with a poor metabolizer (PM) phenotype for CYP2C8 and CYP2C9, key enzymes for elimination of both macitentan and selexipag. The reported results suggest that an allelic profile associated with low activity for CYP2C8 and CYP2C9 enzyme could be a potential risk factor for macitentan and selexipag-induced liver injury and could provide a possible marker for early identification of subjects at higher risk of developing hepatotoxicity. Conclusions A multidisciplinary approach based on clinical evaluation, as well as pharmacological counseling and evaluation of the patient’s genetic profile, might be useful for identification of patients with a high chance of drug-induced liver injury, avoiding unnecessary risks in therapy selection and prescription.

We describe the procedures and results of a geological field analysis campaign in the Río Tinto area. This geologically/biologically well-documented site with its rock/water/biology interaction represents an ideal open-air laboratory where to collect spectral data and samples useful for testing space instruments. During the field campaign, we collected a large set of VIS-NIR (0.35–2.5 μm) measurements using the ASD FieldSpec4 portable spectrometer both on biosignature-bearing rocks and on alteration hydrated products (sulfates, clays, oxides, etc.). Furthermore, as a comparison to the data collected in the field, we report the results of the micro-Raman analyses carried out in the laboratory on the collected mineral/rock samples. This work was conducted in the framework of the Mars Multispectral Imager for Subsurface Studies (Ma_MISS) instrument that is a miniaturized visible and near-infrared (VIS-NIR) spectrometer (0.5–2.3 μm) devoted to the Martian subsurface exploration and integrated into the drilling system of the ESA Rosalind Franklin rover mission. Ma_MISS will acquire spectral data on the Martian subsurface from the excavated borehole wall. The scientific results obtained by this campaign confirm that the Río Tinto site is important for enriching the scientific community’s grasp on the Martian environment and for obtaining key information on the mineralogical and geochemical evolution of the Martian surface/subsurface. In addition, this work provides crucial preparation for the exploitation and interpretation of the scientific data that the Ma_MISS instrument will supply during the active phase of the mission. This activity is also useful for defining the priorities of the astrobiological objectives on the ground.

The paper provides a survey of Norbert Wiener’s scientific work prior to the publication of Cybernetics. Within it, an attempt is made to identify the philosophical-scientific background of cybernetics and to reconstruct the generative process of its main concepts. In conclusion, on the basis of this inquiry, a novel definition of “what we talk about when we talk about cybernetics” is proposed and, on this basis, opens up the need for its critical questioning by philosophy.

Auditory stimulation activates brain areas associated with higher cognitive processes, like the prefrontal cortex (PFC), and plays a role in postural control regulation. However, the effects of specific frequency stimuli on upright posture maintenance and PFC activation patterns remain unknown. Therefore, the study aims at filling this gap. Twenty healthy adults performed static double- and single-leg stance tasks of 60s each under four auditory conditions: 500, 1000, 1500, and 2000 Hz, binaurally delivered through headphones, and in quiet condition. Functional near-infrared spectroscopy was used to measure PFC activation through changes in oxygenated hemoglobin concentration, while an inertial sensor (sealed at the L5 vertebra level) quantified postural sway parameters. Perceived discomfort and pleasantness were rated through a 0–100 visual analogue scale (VAS). Results showed that in both motor tasks, different PFC activation patterns were displayed at the different auditory frequencies and the postural performance worsened with auditory stimuli, compared to quiet conditions. VAS results showed that higher frequencies were considered more discomfortable than lower ones. Present data prove that specific sound frequencies play a significant role in cognitive resources recruitment and in the regulation of postural control. Furthermore, it supports the importance of exploring the relationship among tones, cortical activity, and posture, also considering possible applications with neurological populations and people with hearing dysfunctions.

Several dermal substitutes are available on the market, but there is no precise indication that helps surgeons choose the proper one. Few studies have tried to compare different xenogeneic bioengineered products, but no objective bio-parametric comparison has been made yet. Fifteen patients who underwent skin reconstruction with Integra® or Pelnac® were retrospectively evaluated. After at least 12 months of follow-up, an objective and quantitative assessment of several skin biophysical properties, such as color, texture, elasticity, hydration, glossiness and trans-epidermal water loss, were measured with non-invasive skin measurement devices. The grafted skin showed a reduction of the superficial hydration level and a tendency to lower values of trans-epidermal water loss with both dermal substitutes. Melanic and hemoglobin pigmentation were higher in comparison to the donor site in both groups, while a melanic pigmentation increase versus the surrounding skin was seen just with Integra®. Finally, the skin was found to be more elastic when reconstructed with Integra®. The skin barrier appeared to be intact in both groups. Hence, these substitutes are valuable means of skin regeneration. Integra® seems to be more advantageous for reconstructing areas that need more skin flexibility.

The use of essential oil (EO) in treating infected wounds is still challenging. A lot of effort has been made to make such an application more convenient. Recently, microneedles (MNDs) have been considered as a smart dermal delivery system to overcome the poor absorption and distribution, low bioavailability, and skin penetration of some drugs. The aim of our study is to evaluate the wound healing activity of juniper-EO-loaded MNDs (EO MNDs) against wounds with bacterial and fungal infection. The Polyvinylpyrrolidone (PVP) MNDs were prepared using the gel-filled mold technique and loaded with juniper EO. In vivo models were created and wounds on rats were infected with two clinically isolated bacterial strains Pseudomonas aeruginosa and Staphylococcus aureus. Furthermore, Candida albicans was used to mimic fungal infection and juniper EO MNDs were tested. The obtained results showed an improvement in wound healing which started from the third day after application of the juniper EO MNDs, and at the sixth day post-infection, the treated wounds were significantly smaller than untreated wounds. A complete healing was shown by the 12th day after infection. Furthermore, our cytotoxicity results showed a cytotoxic effect of juniper EO MNDs on epithelial cells, which explained the faster wound healing in rats. Our study showed that juniper EO MNDs represent a novel strategy in EO delivery with minimal invasion. Juniper EO MNDs demonstrated significant antimicrobial activity against both the bacterial strains Pseudomonas aeruginosa and Staphylococcus aureus and against one fungal strain, Candida albicans. Finally, application of juniper EO MNDs exerted promising activity in the treatment and healing of wound infection.

Cariprazine (CAR) is an antipsychotic drug for the treatment of schizophrenia (SCZ) and bipolar disorder (BD), and it acts as a partial agonist on the dopamine receptors (DR), D2, and D3. Although many single nucleotide polymorphisms (SNPs) in genes coding for these receptors are known to influence response to antipsychotics, to date, no study on CAR pharmacogenetics exists. In this pilot study, we investigated the relationship between SNPs in DRD2 (rs1800497 and rs6277) and DRD3 (rs6280), and response to CAR treatment, evaluated by the psychometric Brief Psychiatric Rating Scale (BPRS), in a cohort of Caucasian patients. We found a significant association between DRD2 rs1800497 and rs6277 and response to CAR treatment. When genotypes were combined into an arbitrary score, the receiver operating characteristic curve analysis showed that using a cut-off value of −2.5 the response to CAR treatment could be predicted with a positive likelihood ratio of 8.0. Our study report, for the first time, a correlation between SNPs in DRD2 and response to CAR treatment. After confirmation in a larger cohort of patients, our results could open the way for the identification of new tools for the provision of response to CAR treatment.

IntroductionThe study assessed outcomes and toxicities of different treatment modalities for local and/or regional recurrent nasopharyngeal carcinoma (NPC) in a non-endemic area.MethodsPatients treated with curative intent for recurrent NPC with salvage surgery, photon-based radiotherapy, proton therapy (PT), with or without chemotherapy, at different Italian referral centers between 1998 and 2020 were included. Adverse events and complications were classified according to the Common Terminology Criteria for Adverse Events. Characteristics of the patients, tumors, treatments, and complications are presented along with uni- and multivariate analysis of prognostic factors. A survival predictive nomogram is also provided.ResultsA total of 140 patients treated from 1998 to 2020 were retrospectively assessed. Cases with lower age, comorbidity rate, stage, and shorter disease-free interval (DFI) preferentially underwent endoscopic surgery. More advanced cases underwent re-irradiation, fairly distributed between photon-based radiotherapy and PT. Age and DFI were independent factors influencing overall survival. No independent prognostic effect of treatment modality was observed. No significant difference in the morbidity profile of treatments was observed, with 40% of patients experiencing at least one adverse event classified as G3 or higher.ConclusionRecurrent NPC in a non-endemic area has dissimilar aspects compared to its endemic counterpart, suggesting the need for further studies that can guide the choice of the best treatment modality.

Dissipative Particle Dynamics (DPD) is a stochastic particle model that is able to simulate larger systems over longer time scales than atomistic modeling approaches by including the concept of coarse-graining. Whether standard DPD can cover the whole mesoscale by changing the level of coarse-graining is still an open issue. A scaling scheme originally developed by Füchslin et al. (2009) was here applied to interfacial systems as one of the most successful uses of the classical DPD method. In particular, equilibrium properties such as the interfacial tension were analyzed at different levels of coarse-graining for planar oil–water interfaces with and without surfactant. A scaling factor for the interfacial tension was found due to the combined effect of the scaling scheme and the coarse-graining parameterization. Although the level of molecular description was largely decreased, promising results showed that it is possible to conserve the interfacial tension trend at increasing surfactant concentrations, remarkably reducing modeling complexity. The same approach was also employed to simulate a droplet configuration. Both planar and droplet conformations were maintained, showing that typical domain formations of multi-component systems can be performed in DPD by means of the scaling procedure. Therefore, we explored the possibility of describing oil–water and oil–water–surfactant systems in standard DPD using a scaling scheme with the aim of highlighting its advantages and limitations.

One of the most critical aspects in intraoral impression is the detection of the finish line, particularly in the case of subgingival preparations. The aim of this in vitro study was to evaluate the accuracy among four different Intra Oral Scanners (IOSs) in scanning a subgingival vertical margins preparation (VP). A reference maxillary typodont (MT) was fabricated with a VP for full crown on #16 and #21. The MT was scanned with a laboratory scanner (Aadva lab scanner, GC, Tokyo, Japan) to obtain a digital MT (dMT) in .stl format file. A group of 40 digital casts (dIOC) were obtained by scanning the MT 10 times with four different IOSs: Trios 3, 3Shape A/S; I700, Medit; Vivascan, Ivoclar; and Experimental IOS, GC. All the obtained dIOCs were imported into an inspection software program (Geomagic Control X; 3D SYSTEMS) to be superimposed to the dMT in order to calculate trueness. Therefore, in order to calculate precision, all the scans of the same scanner group were superimposed onto the cast that obtained the best result of trueness. The results were collected as the root mean square value (RMS) on the #16 and #21 abutment surfaces and on a marginal area positioned 1 mm above and below the gingival margin. A nonparametric analysis Kruskal–Wallis test was performed to compare the RMS values obtained in the different iOS groups for trueness and precision. Statistical significance was set at 0.05. For the trueness on the #16 abutment, the Vivascan reported statistically lower values, while on the #21 abutment, Vivascan (56.0 ± 12.1) and Experimental IOS, GC (59.2 ± 2.7) performed statistically better than the others. Regarding precision, Experimental IOS, GC were significantly better than the others on #16 (10.7 ± 2.1) and in the #21 area Experimental, GC, and Trios 3 performed statistically better(16.9 ± 13.8; 18.0 ± 2.7). At the subgingival marginal level for both #16 and #21, all the IOS reported reduced accuracy compared to clinical acceptance.

PMMA (Polymethylmethacrylate) is the material of choice to fabricate denture bases. Recently, with the introduction of CAD-CAM and 3D printers in dentistry, new materials have been proposed for complete denture manufacturing. Aim: This study compared the flexural strength of different resins fabricated using different technologies (conventional, CAD-CAM-milled, and 3D-printed) and polymerization techniques. Methods: A total of 11 different resins were tested: six PMMA conventional (Acrypol R, Acrypol LL, Acrypol HI, Acrypol Fast, Acryself and Acryslef P), two milled obtained from UDMA PMMA disks (Ivotion disk and Aadva disk, control groups), two 3D-printed PMMA resins (NextDent Denture 3D+, and SprintRayEU Denture Base), and one 3D-printed composite resin (GC Temp Print). Flexural strength was measured using a universal testing machine. One-way ANOVA and Bonferroni post hoc tests were performed; the p-value was set at 0.05 to consider statistically significant differences among the groups. Spearman test was used to evaluate the correlation between polymerization technique and the flexural strength of 3D-printed resins. Results: CAD-CAM-milled specimens showed the highest flexural strength (107.87 MPa for UDMA) followed by 3D-printed composite resins (102.96 MPa). Furthermore, 3D-printed resins polymerized for 40 min with the BB cure unit showed no statistically significant differences with conventional resin groups. Moreover, in all the 3D-printed specimens, a high correlation between polymerization technique and flexural strength was found. Conclusions: In terms of flexural strength, the polymerization technique is a determinant for both acrylic and composite resins. Temp Print can be a potential alternative to fabricating removable dentures and showed promising results when used in combination with pink color resin powder.

Background: The aim of this paper is to provide a systematic review of the literature regarding the clinical use of botulinum toxin (BTX) to treat various orofacial neuropathic pain disorders (NP). Methods: A comprehensive literature search was conducted using Medline, Web of Science, and the Cochrane Library databases. Only randomized clinical trials (RCT) published between 2003 and the end of June 2023, investigating the use of BTX to treat NP, were selected. PICO guidelines were used to select and tabulate the articles. Results: A total of 6 RCTs were selected. Five articles used BTX injections to treat classical trigeminal neuralgia, and one to treat post-herpetic neuralgia. A total of 795 patients received BTX injections. The selected studies utilised different doses and methods of injections and doses. All the selected studies concluded superiority of BTX injections over placebo for reducing pain levels, and 5 out 6 of them highlighted an improvement in the patient’s quality of life. Most of the studies reported transient and mild side effects. Conclusion: There is evidence of the efficacy of BTX injections in orofacial pain management. However, improved study protocols are required to provide direction for the clinical use of BTX to treat various orofacial neuropathic pain disorders.

Health care spending in Italy is high and continues to increase; assessing the long-term health and economic outcomes of new therapies is essential. Atopic dermatitis (AD) is a chronic, pruritic, immune-mediated inflammatory dermatosis, a clinical condition that significantly affects patients’ quality of life at a high cost and requires continuous care. This retrospective study aimed to assess the direct cost and adverse drug reactions (ADRs) of Dupilumab and patients’ clinical outcomes. All AD patients treated with Dupilumab at the Sassari University Hospital, Italy, between January 2019 and December 2021 were included. Eczema Area Severity Index, Dermatology Life Quality Index, and Itch Numeric Rating Scale scores were measured. ADRs and drug expenses were analyzed. A statistically significant posttreatment improvement was observed for all the indices measured: EASI (P

Se analizaron las propiedades psicométricas de un instrumento adecuado para medir reputación en el ámbito bancario, y su adaptación al ámbito sanitario con la finalidad de determinar si el cuestionario confiere fiabilidad y validez para ser aplicado en estudios futuros en usuarios del sector salud. Investigación de orden cualitativa con confirmación de instrumento. Se aplicó una fase piloto a 97 pacientes. La aplicación del instrumento reestructurado se aplicó a una muestra de 323 hombres y mujeres que asistieron a la Clínica Odontológica de la Universidad Andrés Bello de la sede Concepción (Chile). Durante la fase piloto y aplicación del instrumento se aplicaron dos análisis factoriales exploratorios, la Prueba de Bartlett, el coeficiente de Kaiser-Meyer-Olkin (KMO) y el Análisis de componentes principales (ACP) y el método de Varimax con normalización Kaiser. Durante la fase de análisis de aplicabilidad del instrumento igualmente se aplicaron dos análisis factoriales confirmatorios para las Compromiso relacional (RC), Intención de comportamiento (BI) y valor relacional (VR). Según los resultados obtenidos el instrumento inicialmente creado por Khan, Kadir y Wahab para el área bancaria puede considerarse un instrumento confiable y sólido para estimar la reputación en el área de la salud. Se piensa que la adaptación realizada al instrumento exhibe propiedades psicométricas apropiadas y consistentes con el instrumento original. El medir el valor relacional puede favorecer de gran manera a determinar el comportamiento futuro de los usuarios que acostumbran a visitar a un organismo asociado al sector sanitario.

The aim of this study was to evaluate the efficacy of activated irrigants (EDTA e NaOCL) during the cleansing of root walls, of the smear layer, of the debris, and gutta-percha after the preparation of the restorative space. Twenty single and multi-rooted (n = 20) have been collected. All samples were prepared by the same operator, using Nickel-titanium rotating instruments (Mtwo) through the Simultaneous Shaping Technique. The continuous-wave of condensation technique of obturation was used. To all specimens, the restorative space has been made, leaving 5 mm of apical gutta-percha, and postoperative periapical X-rays were performed. The samples were randomly divided into two groups: Group (A): cleansing of the root walls with ultrasonic activation of the irrigants (NEWTRON P5 XS; Satelec Acteon); Group (B): radicular walls wash without ultrasonic activation of endodontic irrigants (NaOCl 5.25% and EDTA 17%). Both dental sample groups were cut longitudinally with a low-speed saw (Isomet); the samples were observed by using a scanning electron microscope (Jeol, Jsm-6060LV) in order to evaluate: (1) the amount of debris/smear layer; (2) the mount of obstruction of dentinal tubules found in the two groups; and (3) evaluation of the presence of gutta-percha. Then, the other five samples each group (with and without ultrasonic activation) were prepared following the same protocol. Then, a universal bonding system (G-Praemio Bond, GC) and a layer of a flowable resin composite (Gaenial Flow, GC) were light-cured and used on top of the prepared root canal walls. The samples were cut in two pieces along the long axis of the root. Then, half sample teeth were kept in an acidic solution (37% HCl) for 48 h in order to completely dissolve dental structures and to have a direct view of resin tags formation under SEM. The other half was prepared to observe the adhesive interface under SEM. The amount of debris was not satisfactory in 9 out of 10 cases in Group B, while in Group A, which has been treated with ultrasounds, the result was either good or great in most of the samples. For the sample group treated with ultrasound, the tubules were evaluated as perfectly clean in 9 out of 10 cases, instead, the results are unsatisfactory for 9 out of 10 cases of group B not treated with ultrasound. Differences between Group A and B were statistically significant. With respect to the presence of debris and tubules obstruction treatment with ultrasonic activation, it offers with no doubt better results. When ultrasonic activation is used in combination with endodontic irrigants, a clean dentin substrate is be obtained for the adhesion of restorative materials, but in order to confirm the findings of this study, further in vivo trials are needed.

We are recently faced with a progressive evolution of the therapeutic paradigm for radioiodine refractory differentiated thyroid cancer (RAI-R DTC), since the advent of tissue agnostic inhibitors. Thus, tumor genotype assessment is always more relevant and is playing a crucial role into clinical practice. We report the case of an elderly patient with advanced papillary thyroid carcinoma (PTC) harboring RET-CCDC6 fusion with four co-occurring mutations involving PI3KCA, TP53, and hTERT mutations, treated with pralsetinib under a compassionate use program. Despite the high histological grade and the coexistence of aggressive RET co-mutations, an impressive metabolic and structural tumor response has been obtained, together with a patient’s prolonged clinical benefit. A timely comprehensive molecular testing of those cases wild-type for the common thyroid carcinoma BRAF V600E-like and RAS-like driver mutations may uncover actionable gene rearrangements that can be targeted by highly selective inhibitors with great potential benefit for the patients.

The aim of this study was to assess adaptation and bonding to root canal dentin of discontinuous (short) glass fiber-reinforced composite to intra-radicular dentin (DSGFRC). Methods: Seventy virgin human teeth were extracted and then endodontically treated; then samples were randomly divided into 7 groups (n = 10), based on the materials’ combinations as follows: Group 1, a two-bottle universal adhesive + DSGFRC; Group 2, a single-component universal adhesive + DSGFRC; Groups 3 and 4, the same materials of Goups 1 and 2 were used but after cleaning of the canal walls with 17% EDTA and final irrigation with 5.25% NaOCl Ultrasound Activated (UA); Group 5, traditional prefabricated fiber posts were luted after being silanized with G-Multi Primer; Groups 6 and 7, like Group 5 but after ultrasonic irrigation (UA). All sample roots were cut 1 mm thick (n = 10) to be evaluated regarding root canal adaptation using a light microscope and scanning electron microscope (SEM) and push-out bond strength. These results were statistically analyzed by Kruskal–Wallis analysis of variance by ranks. The level of significance was set at p < 0.05. Results: Bond strength forces varied between 6.66 and 8.37 MPa and no statistically significant differences were recorded among the groups. By microscopic examination, it was noted that ultrasonic irrigation increased the adaptation of the materials to the dentin surface. Conclusions: Within the limitations of this in vitro study, it may be concluded that when DSGFRC was used for intracanal anchorage in the post-endodontic reconstruction, similar push-out retentive force and strength to those of traditional fiber posts cemented with particulate filler resin composite cements were achieved.

The occupational risk of operators using display screen equipment (DSE) is usually evaluated according to the extent of time spent in active operator–DSE interactions. Risk assessment is based on activity data collected through questionnaires. We evaluated an original and innovative system that can objectively assess active operator–DSE interactions by collecting electrical impulses generated by the activation of mouse, keyboard and a camera that collects attentive eye-screen fixation. The main aim of this study was to evaluate the system’s performance on an employee sample involved in the task of active reading and copying at a DSE workstation connected to the system. In the context of mandatory health surveillance at work, we enrolled 38 DSE operators with normal neuropsychological and eye assessments who were required to complete two predefined reading and writing tasks. The obtained results show that the system is able to collect activity data derived from operator–DSE interactions through screen fixation, keyboard tapping and mouse handling. In the copying task, the session duration as recorded by the system was highly related to the screen fixation time. In the copying task, mouse and keyboard activities were more strongly related to session duration than screen fixation. For the copying task, it was also possible to obtain individual profiles of operator–DSE interactions while performing the same standardized tasks. Collected data can allow an objective evaluation of active time spent by DSE operators at their workstations, thus allowing a more accurate occupational health risk assessment and management. Prospective analysis of individual operator–DSE interaction profiles can favor the setup of targeted preventive and organizational interventions from an of even wider worker wellbeing perspective.

Abstract Background The favourable safety profile and the increasing confidence with immune checkpoint inhibitors (ICIs) might have boosted their prescription in frail patients with short life expectancies, who usually are not treated with standard chemotherapy. Methods The present analysis aims to describe clinicians’ attitudes towards ICIs administration during late stages of life within a multicenter cohort of advanced cancer patients treated with single agent PD-1/PD-L1 checkpoint inhibitors in Italy. Results Overall, 1149 patients with advanced cancer who received single agent PD-1/PD-L1 checkpoint inhibitors were screened. The final study population consisted of 567 deceased patients. 166 patients (29.3%) had received ICIs within 30 days of death; among them there was a significantly higher proportion of patients with ECOG-PS ≥ 2 (28.3% vs 11.5%, p

Climate change represents one of the major drivers of habitat modification that is affecting a wide variety of environments. In coastal environments, great effort is being put in trying to understand and forecast the possible effects of such processes, and the Sea-Level Rise (SLR) is one of the most investigated phenomena. This paper describes the possible effects of different 2100 sea-level scenarios related to greenhouse gas mitigation policies (Representative Concentration Pathways - RCPs). This work was conducted on a supralittoral habitat situated in Genova (Ligurian Sea), and has covered an eventual change of environmental conditions driven by SLR, which might impact the Culicid Acartomyiamariae, a resident species. The wave run-up stemming from the different RCPs was simulated using the XBeach model, and to infer SLR effects on A. mariae life cycle; the results were coupled with data obtained from field surveys. The model outputs highlighted a variation in the wave run-up oscillations under common wave conditions, which might affect the supralittoral area in terms of water input and hydric balance, and the A. mariae life cycle, which is highly dependent on temperature and salinity.

BackgroundBRAF and MEK inhibitors target therapies (TT) and AntiPD1 immunotherapies (IT) are available first-line treatments for BRAF v600 mutant metastatic melanoma patients. ECOG PS (E), baseline LDH (L), and baseline number of metastatic sites (N) are well-known clinical prognostic markers that identify different prognostic categories of patients. Direct comparison between first-line TT and IT in different prognostic categories could help in first line treatment decision.MethodsThis is a retrospective analysis conducted in 14 Italian centers on about 454 metastatic melanoma patients, divided in 3 groups: group A—patients with E = 0, L within normal range, and N less than 3; group B—patients not included in group A or C; group C—patients with E > 0, L over the normal range, and N more than 3. For each prognostic group, we compared TT and IT in terms of progression free survival (PFS), overall survival (OS), and disease control rate (DCR).ResultsIn group A, results in 140 TT and 36 IT-treated patients were, respectively, median PFS 35.5 vs 11.6 months (HR (95% CI) 1.949 (1.180–3.217) p value 0.009); median OS not reached vs 55 months (HR (95% CI) 1.195 (0.602–2.373) p value 0.610); DCR 99% vs 75% p value

IntroductionPasireotide (PAS) is a novel somatostatin receptor ligands (SRL), used in controlling hormonal hypersecretion in both acromegaly and Cushing’s Disease (CD). In previous studies and meta-analysis, first-generation SRLs were reported to be able to induce significant tumor shrinkage only in somatotroph adenomas. This systematic review and meta-analysis aim to summarize the effect of PAS on the shrinkage of the pituitary adenomas in patients with acromegaly or CD.Materials and methodsWe searched the Medline database for original studies in patients with acromegaly or CD receiving PAS as monotherapy, that assessed the proportion of significant tumor shrinkage in their series. After data extraction and analysis, a random-effect model was used to estimate pooled effects. Quality assessment was performed with a modified Joanna Briggs’s Institute tool and the risk of publication bias was addressed through Egger’s regression and the three-parameter selection model.ResultsThe electronic search identified 179 and 122 articles respectively for acromegaly and CD. After study selection, six studies considering patients with acromegaly and three with CD fulfilled the eligibility criteria. Overall, 37.7% (95%CI: [18.7%; 61.5%]) of acromegalic patients and 41.2% (95%CI: [22.9%; 62.3%]) of CD patients achieved significant tumor shrinkage. We identified high heterogeneity, especially in acromegaly (I2 of 90% for acromegaly and 47% for CD), according to the low number of studies included.DiscussionPAS treatment is effective in reducing tumor size, especially in acromegalic patients. This result strengthens the role of PAS treatment in pituitary adenomas, particularly in those with an invasive behavior, with progressive growth and/or extrasellar extension, with a low likelihood of surgical gross-total removal, or with large postoperative residual tissue.Systematic Review Registrationhttps://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42022328152, identifier CRD42022328152

BackgroundThe classification of sinonasal carcinomas (SNCs) is a conundrum. Consequently, prognosis and prediction of response to non-surgical treatment are often unreliable. The availability of prognostic and predictive measures is an unmet need, and the first logical source of information to be investigated is represented by the clinicopathological features of the disease. The hypothesis of the study was that clinicopathological information on SNC could be exploited to better predict prognosis and chemoradiosensitivity.MethodsAll patients affected by SNC who received curative treatment, including surgery, at the Unit of Otorhinolaryngology—Head and Neck Surgery of the University of Brescia between October 1998 and February 2019 were included in the analysis. The institutional series was reviewed and a survival analysis was performed. Machine learning and multivariable statistical methods were employed to develop, analyze, and test 3 experimental classifications (classification #1, based on cytomorphological, histomorphological, and differentiation information; classification #2, based on differentiation information; and classification #3, based on locoregional extension) of SNC, based on the inherent clinicopathological information. The association of experimental classifications with prognosis and chemoradiosensitivity was tested.ResultsThe study included 145 patients. From a prognostic standpoint, the machine learning-generated classification of SNC provided better prediction than the current World Health Organization classification. However, the prediction of the chemoradiosensitivity of SNC was not achievable.ConclusionsReorganization of clinicopathological information, with special reference to those related to tumor differentiation, can improve the reliability of prognosis of SNC. Prediction of chemoradiosensitivity remains an unmet need and further research is required.

The authors here propose a chemical reaction that forms ammoniated phyllosilicates on Ceres. This process could trigger at a very low temperature, suggesting Ceres evolution in a region different from its current location.

A passive flexible patch for human skin temperature measurement based on contact sensing and contactless interrogation is presented. The patch acts as an RLC resonant circuit embedding an inductive copper coil for magnetic coupling, a ceramic capacitor as the temperature-sensing element and an additional series inductor. The temperature affects the capacitance of the sensor and consequently the resonant frequency of the RLC circuit. Thanks to the additional inductor, the dependency of the resonant frequency from the bending of the patch has been reduced. Considering a curvature radius of the patch of up to 73 mm, the maximum relative variation in the resonant frequency has been reduced from 812 ppm to 7.5 ppm. The sensor has been contactlessly interrogated by a time-gated technique through an external readout coil electromagnetically coupled to the patch coil. The proposed system has been experimentally tested within the range of 32–46 °C, giving a sensitivity of −619.8 Hz/°C and a resolution of 0.06 °C.

Erythema annulare centrifugum (EAC) is a rare erythema characterized by erythematous and urticarial papules or annular plaques that enlarges centrifugally. The lesions usually involve the thighs and the legs. Several disorders are occasionally associated with EAC, infections, including mycoses, bacteria, or viruses and drugs have also been regarded as possible causes of this eruption. We present a 42-year-old dark-skinned woman affected by recurrent EAC that appeared secondary to influenza type A (H1N1). Histopathology showed a superficial form of EAC. In our case, a previous cytomegalovirus and Epstein-Barr virus (EBV) infection were identified and no underlying other diseases were found. Clarithromycin with calcipotriol betamethasone treatment was temporarily efficacious. In the last 3 years, the lesions started to appear every 2 weeks and tended to regress with local treatment after a variable period. We believe that the latent cytomegalovirus and the reactivity induced by EBV combined with influenza can determine, in our case, a cell mediate cutaneous immune response, which leads to the peculiar inflammatory disease known as EAC.

The origin of blue ejecta around the fresh craters of dwarf planet Ceres is unknown. Here, the authors show that the blue color results from high porosity of the surface, induced by sublimation of ice-phyllosilicate mixture produced by impacts.

IntroductionCariprazine is a third-generation antipsychotic, approved for the treatment of schizophrenia and bipolar disorder and used off-label for schizoaffective disorder and treatment-resistant depression. Cariprazine is a partial agonist at dopamine receptors D2 and D3 and serotonin receptor 5HT1A and an antagonist at serotonin receptors 5HT2B and 5HT2A. It is metabolized by CYP3A4 in desmetyl-cariprazine and didesmethyl-cariprazine, both active metabolites with a half-life of 1–2 days and 2–3 weeks, respectively.Case ReportHere we show the cases of 3 outpatients diagnosed with bipolar I disorder (two patients) and schizoaffective disorder (one patients) and characterized by low adherence to treatment, satisfactory cognitive and personal functioning and average disease severity to whom we administered cariprazine as a monotherapy, on a two-times a week schedule (i.e., every 72–96 h). We evaluated response to treatment and disease remission according to conventional definitions, using rating scales BPRS, PANSS and BDI-II. Two-times a week treatment was set either after a disease relapse (one patient), after a sustained remission obtained with daily administration of cariprazine (one patient) or since our first evaluation (one patient). After 4 weeks of treatment all three patients satisfied criteria for response to treatment and remission, a result that was sustained for 8 (in one patients) and 12 months (in other two patients) and still ongoing.DiscussionReported results support our hypothesis that long half-lives of cariprazine and its metabolites provide an adequate therapeutic response with a two-times a week administration. In selected patients, cariprazine administered as a “oral long-acting” seems effective in treating acute episodes of illness and in sustaining remission, combining advantages of oral and long-acting injectable antipsychotics concerning therapeutic alliance.

Abstract Background Advanced computer-aided design and computer-aided manufacturing (CAD-CAM) technology led to the introduction of an increasing number of machinable materials suitable for dental prostheses. One of these materials is polyetheretherketone (PEEK), a high performance polymer recently used in dentistry with favorable physical, mechanical and chemical properties. The purpose of this study was to review the current published literature on the use of PEEK for the fabrication of dental prostheses with CAD-CAM techniques. Methods Electronic database searches were performed using the terms “PEEK”, “CAD-CAM”, “dental”, “dentistry” to identify studies related to the use of PEEK for the fabrication of CAD-CAM prostheses. The search period spanned from January 1990 through February 2020. Both in vivo and in vitro studies in English were eligible. Review articles and the references of the included publications were searched to identify relevant articles. Results A great number of in vitro studies are available in the current literature pointing out the noticeable properties of PEEK. The use of PEEK has been recommended for a wide range of CAD-CAM fabricated fixed and removable dental prostheses. PEEK was additionally recommended for occlusal splints, intra-radicular posts, implant abutments, customized healing abutments and provisional restorations. However, only a few clinical studies were identified. Conclusions PEEK could be considered as a viable alternative for CAD-CAM fixed and removable dental prostheses to well-established dental materials. Due to the scarcity of clinical data, clinical trials are needed to assess the long-term performance of PEEK prostheses.

Introduction: Supernumerary teeth are frequently reported in dental clinical practice; however, eruption in nasal cavities and paranasal sinuses is an extremely rare clinical entity. Case Report: We report two cases with a history of recurrent nasal discharge and obstruction. In both cases, clinical and radiological findings confirmed the presence of an inverted supernumerary tooth erupted in the sinonasal cavities (i.e., the right nasal fossa and left maxillary sinus, respectively). We managed the cases with transnasal endoscopic approach. A survey of the English literature identified 69 documented cases with intranasal supernumerary teeth within January 1st, 1886 to December 31st, 2017. Conclusion: Inverted supernumerary teeth should be considered among the potential causes of unilateral nasal obstruction and rhinosinusitis and included in differential diagnoses among the fibro-osseous lesions of the sinonasal cavities.