Search

The functionalization of endohedral metallofullerenes by halogenation has not been previously reported and remains a challenging endeavor in carbon nanoscience. In this work, we show that halogenation of endohedral metallofullerenes is predicted to be feasible based on thermodynamic grounds by means of DFT computations, combined with in situ experimental investigations. Computed bond energies for the chlorination, fluorination and hydrogenation of endohedral metallofullerenes that span a range of cage sizes are found to be comparable to those of known halogenated and hydrogenated empty fullerenes. Therefore, we propose that new forms of functionalized metallofullerenes should be synthesized under appropriate experimental conditions, despite many prior unsuccessful attempts. Indeed, we experimentally show for the first time that M@C2n (M = metal) metallofullerenes and the prototypical Sc3N@C80 clusterfullerene can be fluorinated by two different routes under the typical ‘harsh’ gas phase conditions of metallofullerene plasma synthesis, and at lower extents that could avoid cage degradation. The combination of halogenation and metal encapsulation offers the potential to create new radical-quenched, functionalized endohedral metallofullerenes that possess stable, large-gap carbon cages. These results open new avenues for the synthesis and stabilization of encapsulated molecular nanocarbons.

The formation of the smallest fullerene, C28, was recently reported using gas phase experiments combined with high-resolution FT-ICR mass spectrometry. An internally located group IV metal stabilizes the highly strained non-IPR C28 cage by charge transfer (IPR = isolated pentagon rule). Ti@C44 also appeared as a prominent peak in the mass spectra, and U@C28 was demonstrated to form by a bottom-up growth mechanism. We report here a computational analysis using standard DFT calculations and Car–Parrinello MD simulations for the family of the titled compounds, aiming to identify the optimal cage for each endohedral fullerene and to unravel key aspects of the intriguing growth mechanisms of fullerenes. We show that all the optimal isomers from C26 to C50 are linked by a simple C2 insertion, with the exception of a few carbon cages that require an additional C2 rearrangement. The ingestion of a C2 unit is always an exergonic/exothermic process that can occur through a rather simple mechanism, with the most energetically demanding step corresponding to the closure of the carbon cage. The large formation abundance observed in mass spectra for Ti@C28 and Ti@C44 can be explained by the special electronic properties of these cages and their higher relative stabilities with respect to C2 reactivity. We further verify that extrusion of C atoms from an already closed fullerene is much more energetically demanding than forming the fullerene by a bottom-up mechanism. Independent of the formation mechanism, the present investigations strongly support that, among all the possible isomers, the most stable, smaller non-IPR carbon cages are formed, a conclusion that is also valid for medium and large cages.

An ultimate goal in carbon nanoscience is to decipher formation mechanisms of highly ordered systems. Here, we disclose chemical processes that result in formation of high-symmetry clusterfullerenes, which attract interest for use in applications that span biomedicine to molecular electronics. The conversion of doped graphite into a C80 cage is shown to occur through bottom-up self-assembly reactions. Unlike conventional forms of fullerene, the iconic Buckminsterfullerene cage, I h-C60, is entirely avoided in the bottom-up formation mechanism to afford synthesis of group 3-based metallic nitride clusterfullerenes. The effects of structural motifs and cluster–cage interactions on formation of compounds in the solvent-extractable C70–C100 region are determined by in situ studies of defined clusterfullerenes under typical synthetic conditions. This work establishes the molecular origin and mechanism that underlie formation of unique carbon cage materials, which may be used as a benchmark to guide future nanocarbon explorations., An understanding of how caged carbon materials self-assemble from doped graphite is a long-standing challenge. Here, the authors show that distinct bottom-up processes lead to the synthesis of high-symmetry clusterfullerenes.

Fullerenes that encapsulate clusters of atoms represent a fundamental interest in chemistry, materials, and carbon science due to their unique properties and nanoscale structures. Numerous cages that feature a combination of carbon, metal, and heteroatom-based clusters have been discovered since, for example, Sc3NC@C80 was first reported. Nanocarbon reactions that underlie formation of such compounds, however, are not well understood. Here, we experimentally investigate intramolecular reactions of metallofullerenes in the gas phase by means of laser-based techniques, analyzed by high magnetic field Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. A variety of structurally defined clusterfullerene cages (e.g., Sc3N@C68, Sc3N@C78, etc.) are probed under energetic conditions to decipher reactions that may lead to encapsulation of C atoms, as well as clusterfullerenes that include metal-loss products. An aim of the present work is to identify mechanistic processes and principles that guide formation of metallofullerenes that entrap carbon, metal, and heteroatom-based clusters.

A new cage isomer of C70, Sc2S@C2(7892)–C70, has been isolated and characterized by mass spectrometry, UV-Vis-NIR absorption spectroscopy, cyclic voltammetry and DFT calculations. The combined experimental and computational studies lead to the unambiguous assignment of the cage symmetry to C2(7892)–C70. The comparison between Sc2S@C2(7892)–C70 and related endohedral structures has been discussed. A close structural resemblance between Sc2S@C2(7892)–C70 and Sc2S@Cs(10528)–C72 suggests that the conversion of these two molecules may be the result of a simple insertion of C2 and the structural difference between Sc2S@C2(7892)–C70 and Sc3N@C2v(7854)–C70 shows that the nature and geometry of the encaged cluster plays an important role on the selection of the non-IPR cage.

DOI: 10.1021/acs.inorgchem.5b02414 Different structures have been proposed so far for the C92 isomer that encapsulates M3N (M = La, Ce, Pr). We show here that the electrochemical properties of the predicted most abundant (thermodynamic) isomer for La3N@C92 does not agree with experiment. After a systematic search within the huge number of possible C92 isomers, we propose other candidates with larger electrochemical gaps for La3N@C92 before its structure could be finally determined by X-ray crystallography. We do not discard that the thermodynamic isomer could be detected in future experiments though.

DOI: 10.1021/acs.inorgchem.5b02414 Different structures have been proposed so far for the C92 isomer that encapsulates M3N (M = La, Ce, Pr). We show here that the electrochemical properties of the predicted most abundant (thermodynamic) isomer for La3N@C92 does not agree with experiment. After a systematic search within the huge number of possible C92 isomers, we propose other candidates with larger electrochemical gaps for La3N@C92 before its structure could be finally determined by X-ray crystallography. We do not discard that the thermodynamic isomer could be detected in future experiments though.

We have observed new mechanistic insight into the formation of metallic nitride clusterfullerenes from doped graphite by use of laser-based plasma synthesis techniques, analyzed by ultrahigh resolution 9.4 tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. These online chemical sampling techniques provide a route to investigate underexplored nanocarbon reactions that take place under the harsh conditions of metallofullerene synthesis, and are expected to be applicable to macroscopic production methods. Here, we report efforts to form various clusterfullerenes by laser vaporization and extend these techniques as new avenues for investigation of exohedral functionalization (e.g., fluorination of Sc3N@C80) and heteroatom-doping of endohedral fullerenes. This work was supported by NSF Division of Materials Research through DMR-11-57490 and the State of Florida.

An understanding of chemical formation mechanisms is essential to achieve effective yields and targeted products. One of the most challenging endeavors is synthesis of molecular nanocarbon. Endohedral metallofullerenes are of particular interest because of their unique properties that offer promise in a variety of applications. Nevertheless, the mechanism of formation from metal-doped graphite has largely eluded experimental study, because harsh synthetic methods are required to obtain them. Here we report bottom-up formation of mono-metallofullerenes under core synthesis conditions. Charge transfer is a principal factor that guides formation, discovered by study of metallofullerene formation with virtually all available elements of the periodic table. These results could enable production strategies that overcome long-standing problems that hinder current and future applications of metallofullerenes. An understanding of the formation mechanism of endohedral metallofullerenes may pave the way towards targeted synthesis of these nanomaterials. Here, the authors investigate their bottom-up synthesis and determine that charge transfer plays a key role in their formation.

The chemical processes that result in self-assembly of nitride clusterfullerenes are largely unknown because in situ experimental studies are not possible by conventional arc plasma discharge techniques. Here, we report the gas-phase formation of Group III-containing nitride clusterfullerenes by laser vaporization of graphite-, metal-, and heteroatom-based starting materials, conducted by online chemical sampling techniques and analyzed by ultrahigh resolution 9.4 tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. Further, structurally defined clusterfullerenes are exposed to carbon vapor produced from graphite under characteristic physicochemical synthesis conditions to elucidate cluster-cage and structural effects on nanocarbon reactions that control formation.

Thermal contributions to the free energy have to be taken into account to rationalize the formation of Gd(3)N@C(s)(39663)-C(82), a nitride endohedral metallofullerene that shows a carbon cage with two fused pentagons which is not predicted to have the lowest electronic energy among the isomers of C(82). The lower symmetry and the larger number of pyracylene units of C(s)(39663)-C(82) with respect to the cage in the lowest-energy metallofullerene, C(2v)(39705)-C(82), favor its formation at high temperatures, as seen for other similar cage isomers that encapsulate metal clusters within the C(80) and C(82) families. These cages, which share common motifs with the prototypical I(h)(7)-C(80), are all related by C(2) insertions/extrusions and Stone-Wales transformations.

10.1039/c3sc51124c A new titanium-based sulfide clusterfullerene, Ti2S@D3h(24109)-C78, has been successfully synthesized by arc-discharging graphite rods packed with pure TiO2 and graphite powder under an atmosphere of SO2 and helium. Multistage HPLC methods were utilized to isolate and purify the Ti2S@C78, and mass spectrometric characterization confirmed the composition of a Ti2S cluster within a C78 cage. UV-Vis-NIR absorption spectroscopy, electrochemical characterization and extensive DFT calculations led to the assignment of the cage symmetry to D3h(24109)-C78 and suggested an almost linear arrangement of the internal Ti2S cluster, with a formal transfer of six electrons from the cluster to the C78 cage.

A non isolated pentagon rule metallic sulfide clusterfullerene, Sc(2)S@C(s)(10528)-C(72), has been isolated from a raw mixture of Sc(2)S@C(2n) (n = 35-50) obtained by arc-discharging graphite rods packed with Sc(2)O(3) and graphite powder under an atmosphere of SO(2) and helium. Multistage HPLC methods were utilized to isolate and purify the Sc(2)S@C(72). The purified Sc(2)S@C(s)(10528)-C(72) was characterized by mass spectrometry, UV-vis-NIR absorption spectroscopy, cyclic voltammetry, and single-crystal X-ray diffraction. The crystallographic analysis unambiguously elucidated that the C(72) fullerene cage violates the isolated pentagon rule, and the cage symmetry was assigned to C(s)(10528)-C(72). The electrochemical behavior of Sc(2)S@C(s)(10528)-C(72) shows a major difference from those of Sc(2)S@C(s)(6)-C(82) and Sc(2)S@C(3v)(8)-C(82) as well as the other metallic clusterfullerenes. Computational studies show that the Sc(2)S cluster transfers four electrons to the C(72) cage and C(s)(10528)-C(72) is the most stable cage isomer for both empty C(72)(4-) and Sc(2)S@C(72), among the many possibilities. The structural differences between the reported fullerenes with C(72) cages are discussed, and it is concluded that both the transfer of four electrons to the cage and the geometrical requirements of the encaged Sc(2)S cluster play important roles in the stabilization of the C(s)(10528)-C(72) cage.

10.1016/j.crci.2011.09.004 The electronic structure of endohedral metallofullerenes is rationalized by connecting the apparently independent orbital and topological rules that explain the stability of this family of fullerenes. The separation of the 12 pentagons of the fullerene, which is maximized in order to minimize the Coulomb repulsion, is found to be correlated with the orbital energies of the cage that accepts the electron transfer from the internal cluster. An explanation for the absence of non-IPR cages in large-size EMFs is also provided.

not Available.