Search

Background: This systematic review assessed the effectiveness of photodynamic therapy (PDT) in patients with recurrent oral squamous cell carcinoma (OSCC). Methods: Clinical studies on recurrent OSCC treated with PDT alone were included. Combined treatment strategies were excluded. The search was performed on Medline/Pubmed, Cochrane Library, Embase, Web of Science and ClinicalTrials.gov, manual search, and grey literature. Results: The eleven included studies were observational. The risk of bias and methodological quality were evaluated using the Newcastle-Ottawa Quality Assessment Scale. The studies reported the use of hematoporphyrin derivative, PhotofrinⓇ, FoscanⓇ and 5-aminolevulinic acid. Data on treatment response and survival was collected. Secondarily, postoperative courses and patient's quality of life/acceptance were reported whenever available. PhotofrinⓇ and FoscanⓇ were the most used photosensitisers, with more complete responses. Lesions responding less favourably were on posterior regions or deep-seated in the tissue. Conclusions: Although treatment response differs between treatment protocols, PDT stands as a viable treatment option to be considered, as it can achieve therapeutic results and disease-free, long-lasting periods. Partial treatment responses may be of interest when achieving eligibility for other treatment strategies. Despite this study's limitations, which considered four photosensitisers, PhotofrinⓇ was the most used but more recent photosensitisers like FoscanⓇ have greater chemical stability, tissue penetration, and may be more efficacious on recurrent OSCC.

Background: The emergence of new hydraulic calcium silicate cements has revolutionized endodontics, addressing the limitations of mineral trioxide aggregate (MTA). The aim of this study is to assess and compare the marginal adaptation of two calcium silicate-based cements (White ProRoot MTA® and TotalFill® BC RRM Fast Set PuttyTM), when creating apical plugs for teeth with open apices. Methods: twenty-four single-rooted teeth were divided into two groups—GMTA (plug with MTA®) and GTBC (plug with TotalFill® BC RRM Fast Set PuttyTM)—and were sectioned at 1 mm and 2 mm from the apex. The transverse sections were analyzed with scanning electron microscopy and the marginal adaptation of the cements was measured with ImageJ® 1.3 software. Statistical analysis (IBM® SPSS® statistics software version 27) was performed and statistical significance was set at 0.05 (p < 0.05). Results: There was a significant difference in the apical region, favoring White ProRoot MTA®, with a lower percentage of marginal adaptation failure (1.32 ± 4.47), presenting a statistically significant difference in the apical region (p = 0.029) but not in the cervical region of the apical plugs (p = 0.774). Conclusions: White ProRoot MTA® showed superior marginal adaptation in the apical section compared to TotalFill® BC RRM Fast Set PuttyTM.

Currently, composite resins have become the material of choice for the restoration of posterior teeth. Although bulk-fill resins represent a tempting alternative due to their lower complexity and faster use, some dentists are reluctant to use this material. The objective is to compare the performance of bulk-fill resins and conventional resins in direct restorations of posterior teeth based on the literature. The databases that were used to carry out the research were PubMed/MEDLINE, Embase, the Cochrane Library and the WOS. This umbrella literature review complies with PRISMA standards and assesses the quality of studies using the AMSTAR 2 tool. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered low to moderate. The overall meta-analysis, although without statistical significance, favours mostly the use of conventional resin, as it is about five times more likely to obtain a favourable result than bulk-fill resin. Bulk-fill resins result in a simplification of the clinical process of posterior direct restorations, which is an advantage. The performance in terms of several properties of bulk-fill resins and conventional resins showed that they present similar behaviour.

(1) Background: Coronal microleakage can lead to endodontic treatment failure. This study aimed to compare the sealing ability of different temporary restorative materials used during endodontic treatment. (2) Methods: Eighty sheep incisors were collected, uniformized in length, and access cavities were performed, except for in the negative control group, where the teeth were left intact. The teeth were divided into six different groups. In the positive control group, the access cavity was made and left empty. In the experimental groups, access cavities were restored with three different temporary materials (IRM®, Ketac™ Silver, and Cavit™) and with a definitive restorative material (Filtek Supreme™). The teeth were submitted to thermocycling, and two and four weeks later, they were infiltrated with 99mTcNaO4, and nuclear medicine imaging was performed. (3) Results: Filtek Supreme™ obtained the lowest infiltration values. Regarding the temporary materials, at two weeks, Ketac™ Silver presented the lowest infiltration, followed by IRM®, whereas Cavit™ presented the highest infiltration. At four weeks, Ketac™ Silver remained with the lowest values, whereas Cavit™ decreased the infiltration, comparable to IRM®. (4) Conclusion: Regarding temporary materials, Ketac™ Silver had the lowest infiltration at 2 and 4 weeks, whereas the highest infiltration was found in the Cavit™ group at two weeks and in the IRM® group at 4 weeks.

This study aimed to evaluate and compare the microleakage of composite resin restorations under a total-etch adhesive system applied with two different techniques, with and without cure. Cavities were made on the buccal surface of twenty-six intact teeth and subsequently restored with bulk-fill flow composite resin (SDR®® flow+) and conventional resin (Spectra™ ST HV). Two experimental groups were created, one where the total-etch adhesive (Prime & Bond Active®) was cured and another where the adhesive was not cured before placing the flowable resin. Two control groups were also created, negative and positive. After the restorations were finished the, teeth were submerged in a solution of sodium pertechnetate (99mTcNaO4) for 3 h to evaluate the microleakage. The results showed more infiltration of radioisotopes characterized by the highest total count values of microleakage in group 1 (cured adhesive) and in the positive control. Group 2 (noncured adhesive) and the negative control showed lower values. We therefore considered that these groups were similar since their p-value was less than 0.05, with no statistically significant difference. Group 4 showed a statistically significant increase in relation to group 3 (p = 0.027). We concluded that the method of bulk-fill composite resins with noncured adhesive agents can have a positive effect on the longevity of bond strengths, with reduced microleakage.

Hybrid bioactive composite resins combine the benefits of glass ionomer cements with composite resins. Its self-adhesiveness is achieved through functional polyacrylic acids and carboxylic groups, hybridizing the smear layer and establishing ionic interactions between calcium and dentin. These materials are defined as having good aesthetics, moisture tolerance, durability, simplicity in technique and handling and are able to maintain a low microfiltration rate while releasing calcium, phosphate and fluorine. The aim of the present study was to evaluate microleakage in restorations using Surefill One™ bioactive resin. The null hypothesis is that this type of resin does not obtain a lower microleakage rate when compared to other materials. An in vitro study was carried out using thirty-six premolars and molars extracted for orthodontic reasons. Identical preparations were thus performed in all of them (Class V with 4 mm mesio-distal, 3 mm occluso-gingival and 3 mm in depth) and divided into different experimental groups: one positive control, one negative control and two tests with bioactive composite resin and conventional composite resin (Surefill One™ and Spectra™ ST HV, respectively). Through quantitative techniques using nuclear medicine, it was possible to evaluate microleakage through the use of a radioactive isotope, technetium. Radioactivity emitted by the specimens was detected by a gamma camera. The different groups were compared using the Kruskal–Wallis test and the Games–Howell test for multiple comparisons. The results of the experimental study point to statistically significant differences between the test groups (p = 0.002) with increased microleakage in the bioactive composite resin group. Based on the present microleakage study, it was possible to conclude that the bioactive composite resin (Surefill One™) does not reduce the microleakage rate when compared to a conventional nanohybrid composite resin (Spectra™ ST HV). However, Surefill One™ can be used in temporary restorations, primary teeth and in cases of tissue remineralization, thus avoiding more invasive procedures.

After the elimination of dental caries lesions, some microorganisms may remain viable in the tooth structure. Thus, cavity disinfection is an important procedure. The aim of this study was to evaluate the effect of cavity disinfectants on the adhesion to dentin of permanent teeth. Sixty molars were ground flat and randomly assigned to six groups: control; chlorhexidine; Aloe vera; glutaraldehyde; EDTA; ethanol. Cavity disinfectants were applied, rinsed, and air-dried. The restorations were performed with the aid of polyethylene tubes. Shear bond strength, work to detachment, and shear modulus were evaluated. All data were statistically analyzed and the level of significance was set at 5%. The control group showed the lowest shear bond strength (8.34 ± 2.68 MPa). Aloe vera showed the lowest work to debonding (2284 J/m2) while chlorhexidine showed the highest (9347 J/m2). Regarding the shear modulus, ethanol, chlorhexidine, and EDTA presented similar values to the control group (216.11 kPa), and glutaraldehyde and Aloe vera presented values twice as high. The use of chlorhexidine, ethanol, EDTA, glutaraldehyde, and Aloe vera did not impair the adhesion established between the dentin of permanent teeth and composite resin. Even though there is a need for clinical studies to support these findings, all disinfectants seem to be good choices as pretreatment agents.

Background: Obturation represents a critical step in endodontic treatment, which relies on a core material and a sealer. This study aims to evaluate the sealing ability and bond strength to the root canal walls of an epoxy resin-based sealer (AH-Plus®, Dentsply Sirona, Johnson City, TN, USA) and a bioceramic sealer (GuttaFlow Bioseal®, Coltène/Whaledent, GmbH + Co. KG, Langenau, Germany). Methods: Thirty-eight maxillary anterior teeth with single roots and identical round sections were separated into two experimental groups according to the root canal sealers used, namely, G1 = AH-Plus® and G2 = GuttaFlow Bioseal®, and two control groups, specifically, G3 = the negative control and G4 = the positive control. The sealing capacity was measured by the penetration of the radioactive isotope 99mTc. For the push-out test, the compressive force test was performed in a universal machine and the force was applied by exerting pressure on the surface of the material to be tested in the apical to the coronal direction and using three test points with different diameters. Results: GuttaFlow Bioseal® exhibited superior sealing ability compared to AH-Plus® (p = 0.003). Regarding the bond strength, AH-Plus® provided higher adhesion values than GuttaFlow Bioseal® in the three sections of the tooth root (p = 0.001). Conclusions: GuttaFlow Bioseal® had significantly better sealing ability than AH-Plus® but lower adhesion values in the three zones of the root canal, with statistically significant differences between the groups. However, it is important to note that for the action of endodontic sealers to be maximized, the root-filling technique must be most appropriate.

The Caries Management by Risk Assessment (CAMBRA) protocol consists of analyzing the patient’s profile by assessing the risk and protective factors and assigning a risk level to the patient to allow an individualized treatment plan, which combines restorative treatments with a preventive chemical therapy. This systematic review and critical appraisal aim to evaluate the effectiveness of the CAMBRA protocol in reducing the incidence of caries lesions and oral bacterial load. An electronic search was carried out in the Cochrane Library, PubMed, Web of Science, Scopus, and Embase databases. Clinical studies evaluating the incidence of dental caries lesions and/or the reduction of cariogenic bacterial load (Streptococcus mutans and/or Lactobacilli spp.), with at least an intervention group that follows the CAMBRA protocol and a control group published up until January 2022, were included. The methodological quality assessment of the included clinical studies was assessed through the Revised Cochrane risk-of-bias tool for randomized trials (RoB 2). The quality of the case-control study was evaluated according to the Methodological Index for Non-Randomized Studies (ROBINS-I). There is currently no scientific evidence to recommend the integration of the CAMBRA protocol into clinical practice. The results reported by the studies included in the systematic review do not suggest a decrease in the incidence of dental caries lesions and/or bacterial load. There is a clear need for the development of new clinical studies with an adequate methodology and follow-up, both for the CAMBRA protocol and for its components individually.

Direct pulp capping consists of a procedure in which a material is directly placed over the exposed pulp to maintain dental vitality. Although still widely used in clinical practice, previous in vitro studies found that the biomaterial Life® presented high cytotoxicity, leading to cell death. This study aimed to identify the Life® constituents responsible for its cytotoxic effects on odontoblast-like cells (MDPC-23). Aqueous medium conditioned with Life® was subjected to liquid–liquid extraction with ethyl acetate. After solvent removal, cells were treated with residues isolated from the organic and aqueous fractions. MTT and Trypan blue assays were carried out to evaluate the metabolic activity and cell death. The organic phase residue promoted a significant decrease in metabolic activity and increased cell death. On the contrary, no cytotoxic effects were observed with the mixture from the aqueous fraction. Spectroscopic and spectrometric methods allowed the identification of the toxic compounds. A mixture of the regioisomers ortho, para, and meta of N-ethyl-toluenesulfonamide was identified as the agent responsible for the toxicity of biomaterial Life® in MDPC-23 cells. These findings contribute to improving biomaterial research and development.

This study aimed to assess the cytotoxicity of commercially available adhesive strategies—etch-and-rinse (Adper™ Scotchbond™ 1 XT, 3M ESPE, St. Paul, MN, USA, SB1), self-etch (Clearfil™ SE Bond 2, Kuraray Noritake Dental Inc., Tokyo, Japan, CSE), and universal (Scotchbond™ Universal, 3M Deutschland GmbH, Neuss, Germany, SBU). MDPC-23 cells were exposed to adhesives extracts in different concentrations and exposure times. To access cell metabolic activity, viability, types of cell death, and cell cycle, the MTT assay, SRB assay, double labeling with annexin V and propidium iodide, and labeling with propidium iodide/RNAse were performed, respectively. Cultures were stained with May-Grünwald Giemsa for qualitative cytotoxicity assessment. The SB1, CSE, and SBU extracts determined a significant reduction in cell metabolism and viability. This reduction was higher for prolonged exposures, even for less concentrated extracts. CSE extracts significantly reduced the cell’s metabolic activity at higher concentrations (50% and 100%) from 2 h of exposure. After 24 and 96 h, a metabolic activity reduction was verified for all adhesives, even at lower concentrations. These changes were dependent on the adhesive, its concentration, and the incubation time. Regarding cell viability, SBU extracts were the least cytotoxic, and CSE was significantly more cytotoxic than SB1 and SBU. The adhesives determined a reduction in viable cells and an increase in apoptotic, late apoptosis/necrosis, and necrotic cells. Moreover, on cultures exposed to SB1 and CSE extracts, a decrease in the cells in S and G2/M phases and an increase in the cells in G0/G1 phase was observed. Exposure to SBU led to an increase of cells in the S phase. In general, all adhesives determined cytotoxicity. CSE extracts were the most cytotoxic and were classified as having a higher degree of reactivity, leading to more significant inhibition of cell growth and destruction of the cell’s layers.

The aim of this study was to evaluate and compare the sealing ability of two calcium silicate-based sealers (TotalFill BC RRM Fast Set Putty and White ProRoot MTA) when used as apical plugs in immature teeth through nuclear medicine. Single-rooted extracted teeth (n = 34) had their crowns and root tip sectioned to obtain 14 mm long root segments to simulate an in vitro apexification model. Were created two experimental groups, namely MTA (n = 12) and BC (n = 12), and two control groups, PG (positive group, n = 5) and NG (negative group, n = 5). On the 4th day after placing the respective apical plug, the apical portions of the teeth were submerged in a solution of sodium pertechnetate (99mTcNaO4) for 3 h. Statistical analysis showed a significant difference between the MTA group and the controls (p < 0.05). The BC group had a significant difference regarding the negative control (p < 0.001) but showed no statistical significance regarding the positive control (p = 0.168). There was a statistically significant difference (p = 0.009) between the BC group (7335.8 ± 2755.5) and the MTA group (4059.1 ± 1231.1), where the last showed less infiltration. Within the limitations of this study, White ProRoot MTA had a significantly better sealing ability than TotalFill BC RRM Fast Set Putty.

Esthetics is an increasing concern for patients, particularly in anterior teeth. The current approaches to manage the esthetic demands include options such as prosthodontic rehabilitation, orthodontic treatment, and direct restorations. Direct restorative procedures for anterior teeth have become a reliable alternative, since current composite materials can mimic teeth’s esthetics and function perfectly. This article describes two clinical cases of anterior esthetic rehabilitations where the direct reshaping of the four maxillary incisors was performed using the buccolingual layering technique with the help of a silicone index. In Case 1, a diastema closure was also performed, whereas in Case 2, the replacement of old restorations was also carried out. It was possible to achieve excellent final esthetic results in both cases, recovering the smile symmetry, and both patients were satisfied. The literature supports the use of direct restorations in the anterior region with very good long-term prognosis. It is a minimally invasive approach that is reversible, repairable, cost-effective, and when combined with layering techniques and adequate restorative materials, it is possible to achieve good esthetic and functional outcomes. However, regular maintenance appointments are mandatory, and all cases should be carefully planned to ensure predictable and long-lasting results.

Despite developments and advances in dental materials which allow for greater restorative performance, there are still challenges and questions regarding the formulation of new compositions and chemical reactions of materials used in restorative dentistry. The aim of this study was to assess and compare the mechanical and tribological characteristics of a bioactive resin, a composite resin, and a glass ionomer. Twenty specimens of each material were divided into two groups: one control group (n = 10), not subjected to thermocycling, and one test group (n = 10) submitted to thermocycling. The Vickers microhardness test was carried out and surface roughness was evaluated. The tribological sliding indentation test was chosen. The bioactive resin had the lowest hardness, followed by the composite resin, and the glass ionomer. The bioactive resin also showed greater resistance to fracture. For the tribological test, the wear rate was lower for the bioactive resin, followed by the composite resin, and the glass ionomer. The bioactive resin presented a smooth surface without visible cracks, while the other materials presented a brittle peeling of great portions of material. Thus, the bioactive resin performs better in relation to fracture toughness, wear rate and impact absorption than the composite resin and much better than the glass ionomer.

Pre-eruptive enamel lesions occur during tooth formation and include fluorosis, traumatic hypomineralization, and molar incisor hypomineralization. Minimally invasive treatment approaches, such as microabrasion, should be considered for these cases. This article presents a case series of three patients with pre-eruptive enamel defects in esthetically compromised tooth regions which were treated with the microabrasion technique: two fluorosis cases, moderate and advanced, and one hypomineralization case of traumatic etiology. In Cases 1 and 3, there was a significant improvement in esthetics with a total resolution of the enamel defects. However, a slight yellowish coloration may be detected at close observation. In Case 2 (advanced fluorosis), although there was no full resolution of the white spots, there was a clear improvement in esthetics. Microabrasion is a safe and effective, minimally invasive treatment for pre-eruptive enamel lesions. It does not require local anesthesia, it is less destructive than restorative interventions, and allows good esthetic outcomes with no significant postoperative sensitivity. Its efficacy is directly related to the lesions’ severity and depth. Although there are some limitations, further improvement can be achieved with dental bleaching. More invasive treatments might be considered if results are still unsatisfactory.

Introduction: In addition to macro and microvascular complications that are associated with the disease, hyperglycaemia is also a risk factor for several oral complications. The aim of this study is to establish a relationship between dental caries in patients with type 1 diabetes mellitus treated with multiple insulin injections and that of individuals without diabetes. It is also an aim to characterize the oral hygiene habits of this population. Material and Methods: An observational clinical study of analytical and cross-sectional nature was conducted. Thirty patients with type 1 diabetes mellitus and 30 individuals without diabetes were observed and questioned about information regarding their medical history. Oral examination was conducted according to the standards of the World Health Organization and ICDAS was used for caries detection. Statistical analysis was performed and the significance level was set at 5%. Results: Patients with diabetes mellitus showed similar caries levels to that of individuals without diabetes. Patients with diabetes mellitus had a higher dental plaque index. Only 10% of the patients having episodes of nocturnal hypoglycaemia brush their teeth after glucose intake. Discussion: Although there’s some controversy in the literature regarding the prevalence of caries in patients with diabetes mellitus, the results are in agreement with a great number of studies. However, patients with diabetes mellitus have a higher plaque index which can be associated with a higher risk for developing certain oral pathologies. Conclusion: No statistically significant association was found between type 1 diabetes mellitus and dental caries.

Some authors have been proposing the use of cavity disinfectants in order to reduce, or even eliminate, the effect of the microorganisms present in a dental cavity before a restoration is placed. The aim of this study was to evaluate the effect of different cavity disinfectants on bond strength and clinical success of composite and glass ionomer restorations on primary teeth. The research was conducted using Cochrane Library, PubMed/MEDLINE, SCOPUS, and Web of Science for articles published up to February 2021. The search was performed according to the PICO strategy. The evaluation of the methodological quality of each in vitro study was assessed using the CONSORT checklist for reporting in vitro studies on dental materials. Sixteen in vitro studies and one in situ study fulfilled the inclusion criteria and were analyzed. Chlorhexidine was the most studied cavity disinfectant, and its use does not compromise dentin bonding. Sodium hypochlorite is a promising alternative, but more research on its use is required to clearly state that it can safely be used as a cavity disinfectant for primary teeth. Although other disinfectants were studied, there is a low-level evidence attesting their effects on adhesion, therefore their use should be avoided.

The surface smoothness of composite restorations affects not only their esthetic appearance but also other properties. Thus, rough surfaces can lead to staining, plaque accumulation, gingival irritation, recurrent caries, abrasiveness, wear kinetics, and tactile perception by the patient. The aim of this study was to evaluate the influence of irrigation during the finishing and polishing of composite resin restorations. A systematic search of the PubMed, Cochrane Library, EMBASE, Web of Science, and Clinical Trials databases was conducted. Papers published up to 11 February 2021 were considered. The quality of each study was assessed using the modified Consolidated Standards of Reporting Trials checklist for reporting in vitro studies on dental materials. No clinical studies were identified. Six in vitro studies were included, reporting changes in physical and esthetic properties. After performing a methodological quality assessment of the studies, some limitations were identified, the main limitation being the heterogeneous methodology across studies. The evidence resulting from this systematic review did not favor either wet or dry finishing/polishing procedures. There is a clear need for well-designed studies focusing on the comparison of dry/wet finishing/polishing with standard protocols to evaluate the differences among different materials and methods.

The aim of this study was to determine the effect of acidic beverages on the mechanical characteristics of a nanofilled composite resin and of a glass ionomer. Thirty specimens of each restorative material were produced and were evaluated at three different time points: before immersion (T0), after a 7 day immersion (T1) and after a 14 day immersion (T2) in water, beer and a soft drink. The studied parameters were microhardness and surface roughness. At T2, composite resin and glass ionomer specimens immersed in water, beer and the soft drink showed a statistically significant decrease in microhardness compared to T0 results. The surface roughness of composite resin specimens decreased between T0 and T1/T2 after immersion in beer and soft drink. A statistically significant increase was found between the roughness of glass ionomer specimens immersed in each one of the beverages at T0 and T1/T2. It is essential that clinicians are aware not only of available restorative materials, its characteristics and best handling techniques but also of the importance of performing an adequate assessment of patients’ dietary habits, thus making it possible to offer patients quality treatments with a predictable prognosis and longevity.

Cavity disinfection becomes an important step before a dental restorative procedure. The disinfection can be obtained cleaning the dental cavity with antimicrobial agents before the use of adhesive systems. The aim of this study was to conduct a systematic review on the effect of different cavity disinfectants on restorations’ adhesion and clinical success. A search was carried out through the Cochrane Library, PubMed, and Web of Science. In vitro and in situ studies reporting results on dentin bond strength tests, and clinical studies published until August 2020, in English, Spanish and Portuguese were included. The methodological quality assessment of the clinical studies was carried out using the Revised Cochrane risk-of-bias tool. Chlorhexidine could preserve adhesion to dentin. EDTA and ethanol had positive results that should be further confirmed. Given the significant lack of scientific evidence, the use of lasers, fluoridated agents, sodium hypochlorite, or other products as cavity disinfectants should be avoided. Chlorhexidine is a safe option for cavity disinfection with adequate preservation of adhesion to dentin. Moreover, future researches should be focused on the efficacy of these disinfectants against cariogenic bacteria and their best application methods.

The sealers used for root canal treatment should be biocompatible for the peri-radicular tissues, to evaluate the cytotoxic effects of GuttaFlow® bioseal sealer and to compare them with AH26® epoxy resin. Culture media were conditioned with the GuttaFlow® bioseal and AH26® pellets. MDPC-23 odontoblast cell cultures were treated with conditioned medium and serial dilutions. To evaluate the metabolic activity and cellular viability, the MTT and SRB assays were performed. To determine the production of reactive oxygen species, the DHE and DCF-DA probes were used. Cell cycle and cell-death types were assessed by cytometry, and to evaluate the mineralization capacity, the Alizarin Red S coloration was used. Statistical analysis was performed using analysis of variance (ANOVA) when normality was found and Kruskal-Wallis on the opposite case. For the comparison with normality values, the Student t-test was used. Cells exposed to the GuttaFlow® bioseal conditioned medium maintained high metabolic activities, except at higher concentrations. Likewise, viability was maintained, but a significant decrease was observed after exposure to the highest concentration (p < 0.001), associated with cell death by late apoptosis and necrosis. When cell cultures were exposed to AH26®, metabolic activity was highly compromised, resulting in cell death. An imbalance in the production of peroxides and superoxide anion was observed. GuttaFlow® bioseal showed higher biocompatibility than AH26®.

Bisphosphonate-associated osteonecrosis of the jaw (BRONJ), a post-surgical non-healing wound condition, is one of the most common side effects in patients treated with nitrogen-containing bisphosphonates. Its physiopathology has been related with suppression of bone turnover, of soft tissue healing and infection. Biphasic calcium phosphates (BCP) are used as a drug delivery vehicle and as a bone substitute in surgical wounds. Due to their capacity to adsorb zoledronate, it was hypothesized these compounds might have a protective effect on the soft tissues in BRONJ wounds. To address this hypothesis, a reproducible in vivo model of BRONJ in Wistar rats was used. This model directly relates chronic bisphosphonate administration with the development of osteonecrosis of the jaw after tooth extraction. BCP granules were placed in the alveolus immediately after tooth extraction in the test group. The animals were evaluated through nuclear medicine, radiology, macroscopic observation, and histologic analysis. Encouragingly, calcium phosphate ceramics were able to limit zoledronate toxicity in vivo and to favor healing, which was evidenced by medical imaging (nuclear medicine and radiology), macroscopically, and through histology. The studied therapeutic option presented itself as a potential solution to prevent the development of maxillary osteonecrosis.

Tooth whitening procedures are increasing; however, side effects can occur, such as damage to pulp cells, by the whitening products. This study aims to assess the cellular effects promoted by a whitening product, namely, the oxidative stress fostered by the active agent hydrogen peroxide, with and without photoactivation. Additionally, if cellular recovery occurred, we intended to determine the time point where cells recover from the tooth whitening induced damage. Human fibroblasts were exposed to hydrogen peroxide, Zoom®, Zoom® + irradiation, and irradiation alone. The following analysis was performed: metabolic activity evaluation by the MTT assay; cell viability, mitochondrial membrane potential, peroxides production, superoxide radical production, and reduced glutathione expression by flow cytometry. We determined the IC50 value for all groups, and a dose-dependent cytotoxic effect was verified. At the times analyzed, hydrogen peroxide groups showed no metabolic activity recovery while a cell recovery was observed after 24 h (Zoom®) and 48 h (Zoom® + irradiation). Cell death was seen in hydrogen peroxide and Zoom® + irradiation groups, mainly by apoptosis, and the irradiation had a cytotoxic effect per se. This in vitro study supports that whitening products with moderate hydrogen peroxide (HP) concentration have a temporary effect on cells, allowing a cellular recovery.

Background: Indirect restorations using composites with ceramic fillings can be an alternative to ceramic veneering and direct composite restorations for the treatment of posterior teeth. The aim of this study was the evaluation of the mechanical and tribological properties of a ceromer. Materials and Methods: Sixty specimens were produced and divided into two groups: one control group not submitted to thermocycling (n = 20) and one test group submitted to 5000 cycles of thermocycling (n = 40). The studied parameters were microhardness, surface roughness and the coefficient of friction (scratch test). Results: The ceromer exhibits a reduction of polymerization shrinkage, higher wear, and fracture resistance than the composite resins. The studied ceromer presented good mechanical properties, even after being submitted to thermocycling. Roughness was the property most affected, increasing 25.8%, microhardness decreased by 10.5% and the coefficient of friction increased by 4.2%. Conclusions: In certain situations, ceromers can be an alternative to composite resins and ceramics, providing an aesthetic, conservative and longevity option.

The value of aesthetic dentistry has precipitated several developments in the investigation of dental materials related to this field. The free marketing of these products is a problem and it is subject to various interpretations regarding its legality. There are several techniques for tooth whitening, the most used one being the external bleaching. It is the later version of such technique that poses the greatest danger of ingesting the product. The present study analysed the systemic effect of these products when they are swallowed.Objective This experimental study aimed to observe the effects of a tooth whitening product, whose active agent is 6% hydrogen peroxide, on the gastric mucosa of healthy and non-tumour gastric pathology animals.Material and Methods Fifty Wistar-Han rats were used and then distributed into 5 groups, one for control and four test groups in which the bleaching product was administered in animals with and without non-tumour gastric pathology (induced by the administration of 1 sample of 50% ethanol and 5% of drinking water during 6 days) at different times of study by gavage. There was a decrease in body weight in animals of groups handled during the study period, which was most pronounced in IV and VA groups. Changes in spleen weight relative to body weight revealed no statistically significant changes. An analysis of the frequency was performed on the results of macroscopic observation of the gastric mucosa.Results The gastric mucosa revealed lesions in all manipulated groups, being more frequent in groups III and IV. It appears that there is a synergism when using hydrogen peroxide and 50% ethanol in the same group.Conclusion Therefore, it seems that there are some signs of toxicity 3 to 4 days after administration of 6% hydrogen peroxide. The prescription of these therapies must be controlled by the clinician and the risks must be minimized.

Traumatic dental injury can result in avulsion of anterior teeth. In young patients, it is a challenge to the dental professional because after replantation, late complications such as ankylosis require tooth extraction. Although prosthetic and orthodontic treatment, and implant placement have been described as the options for intervention, autogenous tooth transplantation could be an effective procedure in growing patients if there is a suitable donor tooth available. This case presents the treatment of a patient who suffered a traumatic injury at 9 years old with avulsion of tooth 21, which had been replanted, and intrusion of tooth 11. Both teeth ankylosed; thus they were removed and autotransplantation of premolars was carried out. After transplantation, the tooth underwent root canal treatment because of pulpal necrosis. Orthodontic treatment began 3 months after transplantation and during 7 years' follow-up the aesthetics and function were maintained without signs of resorption.

Aim: The aim of this study was to assess the enamel matrix derivative (EMD) as biomaterial used in autogenous tooth transplantation. Material and Methods: The study consisted of 3 beagle dogs, 5 months old, in which six incisors and six premolars were transplanted to mechanically prepared recipient alveolar sockets. One group of teeth was transplanted to a recipient bed, with EMD in the root surface. The second groups of teeth were transplanted using saline solution in the root surface. Every week, clinical examinations were done. Nine weeks later, the animals were killed and the specimens decalcified and prepared for histological and imunohistochemical analysis. Periodontal healing was evaluated by undertaking histomorphometric investigation and analyzed using the Mann- Whitney test (P = 0.05). Results: In both groups, all the transplanted teeth survived. Between the experimental groups, there was statistically significant difference in the complete healing (P = 0.004). There was statistically significant difference between the treatment group in the occurrence of inflammatory root resorption (P = 0.015) and the occurrence of replacement root resorption (P = 0.041). Conclusions: Emdogain gel used on the surface of transplanted teeth improves the occurrence of complete healing and reduces root resorption.

The incorporation of functional monomers in dental adhesive systems promotes chemical interaction with dental substrates, resulting in higher adhesion forces when compared to micromechanical adhesion only. The 10-MDP monomer, whose chemical structure allows for a polar behavior which is favorable to adhesion, also promotes the protection of collagen fibers through the formation of MDP-calcium salts. This systematic review aimed to characterize the interface created by 10-MDP containing adhesive systems through an evaluation of the following parameters: Formation of nano-layered structures, capacity to produce an acid-base resistant zone, and adhesion stability. The research was conducted using PubMed, Cochrane Library, Web of Science and Embase, limited to English, Spanish, and Portuguese articles. The research was done according to the PICO strategy. The 10-MDP monomer has the capacity to produce an acid-base resistant zone on the adhesive interface, which increases the response to acid-base challenges. The adhesion established by these systems is stable over time. To have the best of these adhesive solutions, a scrubbing technique must be used to apply the adhesive system on dental substrates, in order to improve monomers infiltration and to create a stable bond. Time must be given for the solution to infiltrate, hybridize and form the MDP-Ca, improving adhesive stability.

Introdução: A diabetes mellitus tipo 1 e a saúde oral relacionam-se de forma estrita e recíproca, reconhecendo-se nos pacientes diabéticos uma maior suscetibilidade a uma grande variedade de patologias orais. O objetivo do presente estudo consistiu em investigar a relação entre a prevalência da cárie dentária em indivíduos diabéticos tipo 1 tratados com bomba infusora de insulina e a de indivíduos não diabéticos. Material e Métodos: Realizou-se um estudo clínico observacional, analítico e transversal. Incluíram-se no grupo de estudo 30 indivíduos adultos com diabetes mellitus tipo 1 tratados com bomba infusora de insulina (selecionados do Centro Hospitalar da Universidade de Coimbra) e no grupo de controlo 30 doentes não diabéticos (selecionados por entre os acompanhantes dos primeiros). Os elementos de ambos os grupos foram observados entre janeiro e maio de 2015, na Faculdade de Medicina da Universidade de Coimbra, por um médico dentista. A avaliação clínica foi acompanhada do preenchimento de um formulário clínico adaptado aos objetivos da investigação. Para análise estatística assumiu-se um nível de significância de 5%. Resultados: O grupo de estudo apresentou valores semelhantes de índice de cárie dentária e de placa bacteriana aos registados no grupo de controlo. Não se registaram diferenças estatisticamente significativas entre os dois grupos no que diz respeito a hábitos de higiene oral e à frequência de visitas ao médico dentista. Discussão: Embora a dieta dos doentes diabéticos seja menos abundante em hidratos de carbono, prevendo uma menor exposição a alimentos cariogénicos, o elevado número de refeições ingeridas de forma fracionada pode aumentar o risco de cárie, uma vez que o valor de pH crítico para desmineralização é atingido mais vezes ao longo do dia. No entanto, a existência de uma patologia crónica pode determinar um elevado nível de cuidados preventivos gerais, inclusivamente resultando numa melhoria global do seu nível de saúde oral, o que poderá justificar os resultados obtidos. Conclusão: A presença de diabetes mellitus tipo 1 em doentes tratados com bomba de insulina não está associada a um aumento da prevalência de lesões de cárie dentária.

Bisphosphonate-related osteonecrosis of the jaws (BRONJ) is a severe complication that has recently emerged in patients treated with intravenous bisphosphonates for malignant diseases. This complication usually presents after a minor local trauma during a dental treatment. Several etiopathogenic mechanisms of this pathological condition have been proposed, but no model can explain all morphological changes observed at the macroscopic and microscopic level. BRONJ is likely to be related to direct toxicity in the bone and soft tissue cells, due to nitrogen-containing bisphosphonates. This review elucidates the clinical indications and mechanism of action of bisphosphonates, reports some clinical diagnostic criteria for BRONJ, describe the histopathological criteria for BRONJ diagnosis, the potential triggering pathways and the available treatment strategies.

Introdução: A diabetes mellitus é uma doença endócrina onde estão envolvidas as hormonas produzidas pelos ilhéus de Langerhans. A diabetes mellitus pode afetar várias funções do sistema imunitário do indivíduo, predispondo-o para a inflamação crónica, degradação progressiva dos tecidos e diminuição da reparação tecidular. Das alterações provocadas por esta doença ao nível da cavidade oral pode-se destacar a xerostomia, disgeusia, alterações periodontais, aumento da suscetibilidade à infeção e alterações tanto ao nível da polpa dentária como nos tecidos periapicais. Objetivos: O objetivo deste trabalho é avaliar a influência da diabetes mellitus ao nível dos tecidos periapicais e no sucesso dos tratamentos endodônticos nestes doentes. Material e Métodos: Foram analisados 737 casos clínicos tratados na consulta da Área de Medicina Dentária, a que foram feitos tratamentos endodônticos não cirúrgicos, entre os anos de 2003 e 2012. Destes foram selecionados os doentes com diabetes mellitus, num total de 32, dos quais 23 se dispuseram a vir à consulta e a participar neste estudo. Os dados recolhidos foram analisados no software Statistical Package for the Social Sciences, versão 19, a um nível de significância de 5%. Resultados: Foram avaliados 37 dentes no grupo teste e 25 no grupo controlo. Para os parâmetros analisados relativos ao diagnóstico pulpar, mobilidade, presença de fístula, dor à percussão horizontal e vertical, avaliação da restauração definitiva e intervalo de tempo entre a consulta de obturação e a restauração definitiva e/ou a consulta de controlo, não foram verificadas diferenças estatisticamente significativas (p > 0,05). Em relação à avaliação do sucesso dos tratamentos endodônticos realizados, este foi de 62% no grupo de teste e de 80% no grupo controlo (p > 0,05). Conclusões: Os resultados deste estudo não são conclusivos em relação ao aumento da prevalência da periodontite apical nos doentes diabéticos. Em relação à avaliação do sucesso dos tratamentos endodônticos analisados verificou-se que a percentagem de sucesso nos doentes diabéticos é mais baixa, embora não seja estatisticamente significativa. Por este motivo e dadas as limitações deste estudo, não se pode afirmar que doentes com diabetes mellitus têm maior predisposição para o desenvolvimento de lesões periradiculares ou que o sucesso dos tratamentos endodônticos nestes doentes esteja comprometido. É importante, no entanto, que sejam desenvolvidos mais estudos de forma a caracterizar as alterações pulpares e periradiculares e a avaliar a prevalência da periodontite apical e sua progressão em doentes com diabetes mellitus.