Search

Da tempo si sentiva l’esigenza in ambito scientifico di produrre un testo che contenesse in modo completo ed esaustivo tutto ciò che bisogna sapere in merito alla prevenzione dentale, soprattutto se si osserva il notevole progresso fatto negli ultimi decenni dalla medicina in questo campo. Infatti, le acquisizioni recenti da un punto di vista nutrizionale ed odontoiatrico non riguardano solamente la sfera della terapia, ma anche quella della prevenzione. Inoltre, l’interesse delle Scienze della Nutrizione ormai è rivolto decisamente anche verso l’Odontoiatria e, conseguentemente, verso quella materia strettamente connessa a tale branca della medicina e denominata Igiene Dentale.

In cases of severe horizontal atrophy, implant placement requires bone reconstruction procedures. The aim of this randomized controlled trial is to compare the outcomes of bone augmentation with simultaneous implant placement using the shell technique to the outcomes of guided bone regeneration (GBR) in cases of severely horizontal bone atrophy. This study was designed as a monocentric, parallel-group, randomized controlled trial with a six-month follow-up. Among the primary outcomes of this study, peri-implant bone regeneration and peri-implant bone defect closure were selected. Forty-four patients were recruited and equally divided between two groups. In the GRB group, a horizontal regeneration of 2.31 ± 0.23 mm was observed opposed to a horizontal regeneration of 2.36 ± 0.17 mm in the shell group (p = 0.87). A volumetric increase was observed in both groups, with an increase of 0.30 ± 0.12 cm3 in the GBR group and an increase of 0.39 ± 0.09 cm3 in the shell group, highlighting a significant difference between the two groups (p = 0.02). In conclusion, bone augmentation with simultaneous implant placement using the shell technique or guided bone regeneration in horizontal bone atrophy are both predictable therapeutic options.

Edentulous patients' quality of life can be greatly diminished by the use of a badly fitting removable prosthesis, as many aspects of social life become notably impaired. The object of this study was to evaluate if treating these patients with a two implants mandibular overdenture could improve their quality of life as measured with the Italian version of the OHIP-14 (Oral Health Impact Profile). Edentulous patients, in good clinical condition, were selected. Two implants were placed following the recommended guidelines and three months after new mandibular dentures were manufactured, implants were uncovered and connected to the prosthesis using LOCATOR abutments. OHIP-14 was measured at baseline, one month after delivery and one year after delivery. An improvement was observed even after one month (with a mean reduction of 17 points in OHIP) and that improvement appeared to be stable at the one-year follow-up. Mandibular overdentures can improve a patient's quality of life when compared to a tissue-supported removable complete denture, as long as the patient is subjected to an appropriate follow-up as the retentive rings of the attachment can deteriorate even after two years and lose a great deal of retentive capabilities.

High levels of cholesterol and triglycerides may have a negative effect on the immune system and bone health, leading to lower bone mineral density, an increased risk of osteoporosis, and bone fractures, and could therefore also be related to a significant worsening of peri-implant health. The purpose of the following study was to evaluate whether the altered lipid profile in patients who undergo implant insertion surgery represents a prognostic factor capable of influencing clinical outcomes. This prospective observational study was conducted on 93 subjects; patients were required to have taken blood tests to obtain triglycerides (TG), total cholesterol, low-density lipoprotein (LDL), and high-density lipoprotein (HDL) levels prior to the surgical procedure to classify them according to current American Heart Association guidelines. The outcomes considered were marginal bone loss (MBL) 3 years after implant placement, full-mouth plaque score (FMPS), and full-mouth bleeding score (FMBS) 3 years after surgery. A statistically significant correlation was found between hypertriglyceridemia and MBL as well as between total cholesterol and MBL. There is no statistically significant correlation between the variables analyzed and the secondary outcomes 3 years after implant placement. Peri-implant marginal bone loss may be influenced by hyperlipidemia. However, further studies are needed, with larger samples and more extensive follow-ups, to confirm these results.

Guided bone regeneration (GBR) is a reconstructive procedure for treating atrophic alveolar ridges. This study aims to assess the correlation between different glycemic control levels and clinical findings in patients undergoing horizontal GBR before implant placement. The study population consisted of all patients requiring horizontal GBR. Patients were divided into three groups based on HbA1c levels: non-diabetic normoglycemic patients (HbA1c < 5.7%), non-diabetic hyperglycaemic patients (HbA1c < 6.5%), and patients with controlled diabetes (HbA1c < 7%). The primary outcomes were the horizontal (mm) and vertical (mm) dimensional changes of the alveolar ridge 6 months after the procedure. The study sample consisted of 54 patients. Sixty-eight implants (95.8%) were classified as "successful," meaning the possibility of inserting a standard-sized implant following the GBR (diameter ≥ 4 mm). There was a statistically significant difference between the three groups in terms of horizontal gain at 6 months: in particular, there was a statistically significant difference between group 1 and group 2 (p = 0.026) and between group 1 and group 3 (p = 0.030). The present investigation showed that patients with HbA1c levels below 7% could undergo GBR and obtain a statistically significant horizontal bone gain.

Il libro prende in considerazione gli aspetti fondamentali della relazione tra le due discipline ed è rivolto anzitutto a coloro che si interessano di Scienze Odontostomatologiche sia in ambito accademico che in ambito strettamente professionale: odontoiatri generici e specialisti in Chirurgia Orale e Ortognatodonzia; medici di base e specialisti in Chirurgia Maxillo-Facciale, Otorinolaringoiatria, Gastroenterologia; igienisti dentali. Si rivolge quindi a professionisti e docenti impegnati nel settore della Nutrizione (nutrizionisti clinici, biologi nutrizionisti, dietisti, farmacisti), e infine a tutti coloro che volessero ampliare la loro formazione medica.

To develop an Italian version of the Orofacial Esthetic Scale (OES-I), validated in a prosthodontic and non-prosthodontic patients' cohort, for clinicians and researchers to use in their practice.

Introduction. Full-arch, implant-supported hybrid restorations, employing tilted implants, can offer an efficient way of treating edentulous patients. Several factors, such as the timing of implant placement and the inclination of the fixture, can have a detrimental effect on their stability. This retrospective study is aimed at discerning the role played by those factors. Materials and Methods. Patients treated with full-arch, implant supported restorations were selected for this study; cone-beam computed tomography (CBCT) images, taken 3 months and 3 years after delivery of the final restoration, as well as peri-implant values, were obtained and compared; bone loss was measured on four sites for each implant and then averaged. These patients were recalled, and the OHIP-5 questionnaire was administered. Results. 21 patients, with a mean age of 53 years, were included in the present analysis. 108 implants were placed, and 25 Toronto prostheses were delivered. According to a mixed-model analysis, tilted implants (0.51, p < 0.001) had a higher rate of bone loss, while implants placed in a healed ridge suffered less bone loss than immediate implants (-0.21, p < 0.001). Patient-level variables have a significant effect on this variable, as implants coming from the same subject share a similar risk of bone loss. The mean response to the self-administered OHIP-5 questionnaire was 1.53 +/- 0.29; other variables did not have a statistically significant effect on this outcome. Discussion/Conclusions. The results of the present study show that Toronto bridges prostheses are an efficient procedure for treating edentulous patients, as their oral-related quality of life is reported as satisfactory even 7 years after delivery of the restoration. Tilted and immediate implants are more at risk of bone loss. Implants coming from the same subject share a similar risk of bone loss.

The advantages of immediate implant placement for patients include a reduced number of surgical procedures and a shorter overall treatment time. Disadvantages include a higher risk of aesthetic complications. The aim of this study was to compare xenogeneic collagen matrix (XCM) versus a subepithelial connective tissue graft (SCTG) used for soft tissue augmentation in combination with immediate implant placement without provisionalization. Forty-eight patients requiring a single implant-supported rehabilitation were selected and assigned to one of two surgical procedures: immediate implant with SCTG (SCTG group) or immediate implant with XCM (XCM group). Marginal changes in the peri-implant soft tissue and the facial soft tissue thickness (FSTT) were assessed after 12 months. Secondary outcomes included peri-implant health status, aesthetics, patient satisfaction, and perceived pain. All of the implants placed were successfully osseointegrated, resulting in 1-year survival and success rates of 100%. The patients in the SCTG group had a significantly lower mid-buccal marginal level (MBML) recession (P = 0.021) and a greater increase in FSTT (P < 0.001) than the patients in the XCM group. Using xenogeneic collagen matrix during immediate implant placement significantly increased FSTT from the baseline, leading to good aesthetic and patient satisfaction results. However, the connective tissue graft yielded better MBML and FSTT results.

Objective: The introduction of CAD/CAM and the development of zirconia-based restorations have allowed clinicians to use less expensive materials and faster manufacturing procedures. The purpose of the study was to analyze the differences, in terms of mechanical and biological complication, in multiunit zirconia fixed dental prosthesis (FPDs) on posterior implants produced using a digital workflow. Method and Materials. This study was a retrospective investigation, and patients treated with screw-retained monolithic or partial veneer FPDs on dental implants were selected. Periapical radiographs were taken at baseline and at the 3-year follow-up. Complications were recorded and classified as technical and biological ones. Results: The study population included 25 patients. The occlusal and interproximal corrections were not clinically significant. In the study sample, the survival rate and success rate of the FPDs after 3 years were 100% and 96%, respectively. One implant failed immediately after placement. Conclusion: Monolithic zirconia FPDs and partial veneer FPDs showed a 100% survival rate, presenting an interesting alternative to metal ceramic restorations. The partial veneer FPDs had a higher technical complication rate than the monolithic FPDs; however, no statistically significant difference was found.

Diabetes represents a challenge in implant therapy because hyperglycemia may negatively affect bone regeneration, directly compromising clinical outcomes and increasing clinical failures. The aim of this retrospective study is to analyse the prognostic significance of HbA1c levels in patients undergoing implant placement associated with horizontal guided bone regeneration. Thirty-four patients were divided into 3 groups according to their HbA1c levels: nondiabetic normoglycemic patients (HbA1c < 5.7%), nondiabetic hyperglycemic patients (HbA1c < 6.5%), and controlled diabetic patients (HbA1c < 7%). Primary outcomes were dimensional changes in height (VDH) and width (DW) of the peri-implant defect. Secondary outcomes were evaluations of periodontal parameters of adjacent tooth sites, wound healing, marginal bone loss (MBL), and survival and success rates. At T 1 (6 months), mean VDH values in groups 1, 2, and 3 were, respectively, 0.07, 0.5, and 0.25 mm. Mean DW values in those same groups were, respectively, 0.07, 0.38, and 0.33 mm. HbA1c levels were not statistically related to VDH and DW values at T 1. No statistically significant differences were observed in MBL between groups (p = 0.230). Implant survival and success rates were, respectively, 98% and 96%. Simultaneous guided bone regeneration is a feasible procedure for the treatment of horizontal bone deficiencies in controlled diabetic patients.

Purpose: This is a systematic review and meta-analysis to estimate the overall prevalence of Proximal Contact Loss (PCL) and determine the distribution and clinical features of proximal contact loss. Methods: This systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. As this was a systematic review of prevalence, the condition, context, and population framework was followed. The focus question was: What is the prevalence and distribution of PCL in implant-supported restorations? Two investigators independently examined the literature in four databases (Medline, Scopus, Web of Science, and Cochrane) for suitable articles published before November 11, 2020, with no start-date restriction; an additional search was conducted by hand. A standardized data extraction chart was utilized to extract the relevant information from the selected studies. Results: Fifteen studies met the inclusion criteria. A total of 11,699 restorations were evaluated in the final sample. The overall prevalence was 20% at the implant-restoration level (among 4984 implants) and 26.6% at the contact point level (among 2603 contact points). The frequency of proximal contact loss was higher on the mesial side, both at the implant-restoration level (13.8%) and at the contact point level (21.9%), than on the distal side, where the prevalence was 3.3% and 11.0%, respectively. The event rate in the maxilla and in the mandible at the contact level was 21.4% and 21.9%, respectively. Conclusions: Proximal contact loss is a frequent complication. Approximately, 29% of contact points develop this condition, which may cause food impaction and damage to the interproximal tissues.

STATEMENT OF PROBLEM: The technology behind optical scanners has greatly improved recently, making their dental application advantageous. While their accuracy is now comparable with that of conventional impression materials, whether these techniques have other advantages is unclear.PURPOSE: The purpose of this systematic review and meta-analysis was to determine whether digital scanning for implant-supported restorations is more time-efficient and convenient for the patient.MATERIAL AND METHODS: The study was conducted on September 23, 2020 using 4 different databases (Medline, Cochrane, Web of Science, Scopus) searching for clinical studies that compared the time needed and/or patient perceptions between those who had undergone the digital scanning procedure and those who had undergone conventional impression making.RESULTS: Twelve studies met the inclusion criteria for qualitative and quantitative analysis. Outcome variables were measured as standard mean differences (SMDs) by following a fixed-effects model or random-effects model (in the case of high heterogeneity). Digital scanning was more time-efficient and was preferred by patients for all 4 analyzed outcomes (comfort, anxiety, nausea, time perception).CONCLUSIONS: Digital scanning was found to be more time-efficient and convenient than conventional impression making for implant-supported restorations. Additional randomized controlled trials are needed to confirm the findings of this review.

The digital workflow and the application of Computer-Aided Manufacturing (CAM) to prosthodontics present the clinician with the possibility of adopting new materials that confer several advantages. Especially in the case of zirconia, these innovations have profoundly changed daily practice. This paper compares the satisfaction and perception of patients who received implant-supported single crowns (SC) and fixed partial dentures (FPD) made from zirconia, either monolithic or partially veneered, after 3 years of follow-up; the success and survival rate of these restorations were also measured. Forty patients, who had been previously treated with implant-supported SC or FPD, either monolithic or partially veneered, and submitted to a yearly maintenance program, were recalled 3 years after their treatment and requested to complete an 8-question questionnaire regarding their perceptions of the treatment. Any mechanical or biological complication that had occurred from the time of delivery was also recorded. Patients that experienced ≥1 complication were less likely to be prone to repeat the treatment. The 3-year success rate was 92.6% for monolithic restoration and 92.3% for partially veneered restoration, while the survival rate was 100% for both restorations. The 3-year follow-up found that monolithic and partially veneered zirconia restorations are both well-accepted treatment options, and patients preferred the veneered restorations (0.76, p < 0.05) from an aesthetic point of view. According to our results, monolithic and veneered zirconia restorations are both reliable treatment options and are both equally accepted by patients.

The purpose of this clinical research was to evaluate peri-implant marginal changes around immediate implants placed either with the application of SCTG or XCM or without soft tissue grafting. A total of 48 patients requiring a single implant-supported restoration in the anterior jaw were selected for inclusion. Three surgical procedures were performed, as follows: type 1 implant with subepithelial connective tissue graft (SCTG), type 1 implant with xenogenic collagen matrix (XCM), and type 1 implant without soft tissue augmentation (NG) (control group). The marginal change of peri-implant soft tissue, facial soft tissue thickness (FSTT), peri-implant health status, esthetics, and patient satisfaction were assessed at one year after surgery. All of the placed implants showed a survival rate of 100%. No significant differences in FSTT were recorded between the SCTG group and the XCM group after treatment (P > 0.05), while the NG group presented a significant difference (P < 0.05). Patients in the NG group lost significantly more in the buccal marginal level than did patients in the SCTG group and those in the XCM group (P < 0.05). The favourable success rate recorded in all groups confirmed immediate tooth replacement as a choice of treatment for a missing anterior single tooth. The NG group presented significant changes of FSTT and buccal marginal level, while XCM constituted a viable alternative to SCTG.

Diet and nutrition are generally categorized as modifiable lifestyle risk factors for the development of periodontal disease because diet may influence a person’s inflammatory status. This study aimed to evaluate the efficacy of the application of a diet plan focused on reducing inflammation and oxidative stress in treating periodontitis. Subjects suffering from periodontitis were divided into two groups. Both groups underwent non-surgical periodontal therapy, and in the optimized diet (OD) group, this treatment was associated with a diet plan. The sample consisted of 60 subjects; 32 (53%) were treated in the non-optimized diet group (ND group) and 28 (47%) in the OD group. In both groups, the periodontal treatment significantly improved the recorded periodontal outcomes between T0 and T1 (FMPS, FMBS, CAL, PPD). Inter-group differences were not statistically significant (p < 0.05). The linear regression models showed that the optimized diet was associated with a higher reduction in PPD and FMBS after the treatment, while patients who had higher LDL levels (over 100 mg/mL) had a less favorable improvement of PPD. The application of an improved diet plan can increase the reduction in PPD and FMBS after non-surgical periodontal therapy when compared with periodontal treatment alone.

(1) Background: Ankyloglossia, or tongue-tie is a condition, in which the tip of tongue cannot protrude beyond the lower incisor teeth because of short frenulum linguae, often containing scar tissue. Limitations of movement are the most important clinical symptoms of this condition, together with feeding, speech, and mechanical problems. (2) Methods: the present study included two groups of patients (group A and group B) including, respectively, 29 and 32 patients (61 patients total), aged from 8 to 12 and presenting ankyloglossia classified according to the Kotlow’s classification. The patients in group A underwent a common surgical procedure. For the patients of group B, a diode laser device (K2 mobile laser, Dentium, Korea) with a micro-pulsed wavelength of 980 ± 10 nm and power of 1.2 watts was used. The post-surgical discomfort of the patients (recording the pain perceived immediately after the end of the anesthesia and during the following week, using the Numeric Rating Scale (NRS) system) and healing characteristics (recorded using the Early Wound Healing Score or EHS) were evaluated. (3) Results: The results shows that the pain in the patients who underwent laser-assisted frenectomy is significantly reduced (p < 0.001) when compared to those who underwent conventional surgical frenectomy, both immediately after surgery (with a reduction in the average NRS of 80.6%) and after the first week (with a reduction in the average NRS of 86.58%). Additionally, in the same patients, an augmentation in the average value of the EHS of 45% was recorded, highlighting significantly (p <0.001) better quality in the healing of the wound within the 24 h after surgery. Moreover, other advantages observed in the use of laser assisted-frenectomy are the absence of bleeding and, consequently, a clear operative field; no need to use sutures; no need to take painkillers or antibiotics after surgery; and having a faster recovery and less time needed to perform the operation. (

Zirconium dioxide (ZrO2) is an inert ceramic with excellent physical properties so as to be called “ceramic steel.” Its first use in the orthopedics dates back to 1969 and since then has been continuously increasing in the construction of prosthetic implants. In recent years its use, for a good osseointegration and its esthetic characteristics, has increased in dentistry. In this chapter the authors analyzed the “aging” of zirconia and its biocompatibility, for example, the ability not to induce immune or adverse responses in the host organism. Specifically they evaluated the cellular response of zirconia in vitro and in vivo. The lack of carcinogenicity and locality and systemic toxicity combined with the strength of the material and its ability to promote osseointegration make this material an ideal coating of prosthetic implants. However, further studies are needed to improve the biomedical use of zirconia to improve surface configurations and prevent material aging.

Background: Scientific information about the effects of implant therapy following a precise workflow and patient and operators’ preferences should be considered to choose which implant treatment protocol to use, and to achieve patient’s satisfaction and functional results. The aim of this study was to analyze implant rehabilitations with a fully digital workflow and compare this approach with a conventional one. Methods: This study comprises 64 patients treated with a fully digital approach and 58 patients treated using a conventional protocol. Patient and operator centered outcomes were assessed through two visual analogue scale (VAS) questionnaires. Results: The VAS questionnaire demonstrated better results for the digital workflow concerning anxiety, convenience, taste, nausea sensation, pain and breathing difficulties (p < 0.0001). The VAS questionnaire administered to the operators showed better scores for the digital approach in relation to anxiety, convenience, difficulties of the impression procedure and the workflow (p < 0.0001). A significant reduced mean time for the digital workflow as well as a reduced number of required visits were recorded. Conclusion: The analysis of a fully digital and a conventional protocol showed better results according to patient and operators’ preferences when a fully digital approach was used.

Background: Peri-implantitis is an inflammatory disease with an increasing diffusion rate which can affect the long-term survival of a prosthetic rehabilitation. The present study focused on the decontaminating efficacy of chlorhexidine and air polishing system with sodium bicarbonate powder against Candida albicans, a microorganism which seems to have a superinfecting opportunistic role in the pathology. The aim of the authors was to investigate and compare the effectiveness of these treatments, commonly used in clinical practice. Methods: An in vitro study was conducted to analyze the effects of two widely used therapeutic aids for the disinfection of affected titanium implants: chlorhexidine (CHX) and air polishing with sodium bicarbonate powder (P). A qualitative and quantitative comparative analysis of the residual biofilm was carried out using a colorimetric assay (XTT) and scanning electron microscopy (SEM) observation. The experiment was conducted both on machined titanium surfaces and on rough sandblasted ones with the aim of bringing out differences in the therapeutic outcomes concerning the superficial texture of the implant. The null hypothesis was that no difference could be detected between the samples, regarding both the treatments performed and the nano-structural features of titanium. Results: The best results (on both types of implant surfaces) were obtained when combining the use of chlorhexidine and air polishing (C + P). A linear decrease in the optical density (OD) values recorded at three different time points (30 s, 1 min, 5 min) was also observed passing from the first to the last one. When observed under scanning electron microscope rough surfaces showed an extensive and highly structured biofilm, more complex if compared to the one encountered when analyzing machined implants. Conclusions: the present pilot study showed that rough surfaces can promote fungal adhesion and eventually hinder the outcome of a decontaminating treatment. For thi

This clinical study retrospectively analyzed cone beam computed tomography (CBCT) images to determine the potential influence of implant inclination on peri-implant marginal bone loss after 18 to 24 months of functional loading. Twenty-five consecutive patients presenting with an edentulous or partially edentulous maxilla or mandible and an adequate bone volume for receiving oral implants were selected for analysis of the marginal bone loss around tilted and/or axial implants. The study population included patients rehabilitated with Toronto bridges (TBs), fixed partial dentures (FPDs), or single crowns (SCs) on axial and/or tilted implants. The primary outcome was the CBCT analysis of peri-implant marginal bone level change, depending on inclination of implants and type of prostheses. The secondary outcome was analysis of survival and success rates of tilted and axial implants. A significant difference was observed for peri-implant buccal bone loss (mean of axials 0.42 ± 0.06; mean of tilted 0.70 ± 0.09) (P = .009). The difference in peri-implant lingual/palatal/mesial/distal bone loss was not significant between axial and tilted implants (P > .05). No significant difference was observed between the marginal bone level and the type of prostheses for both tilted and axial implants in all the assessed sites (P > .05). The success rate for both tilted and axial implants was 100%, and no complications were observed for all the prosthetic rehabilitations, with a 100% survival rate. Compared to axial implants, tilted implants showed a significant statistical difference for peri-implant buccal bone loss, but no other differences were observed for peri-implant bone loss or for implant survival and success rate. Fixed partial or total rehabilitation using tilted or axial implants, or with tilted and axial implants, could be a reliable technique with advantages to patients and operators.