Search

Scientific reports 11(1), 22311 (2021). doi:10.1038/s41598-021-01774-6, During the last decades discussions were taking place on the existence of global, non-thermal structural changes in biological macromolecules induced by Terahertz (THz) radiation. Despite numerous studies, a clear experimental proof of this effect for biological particles in solution is still missing. We developed a setup combining THz-irradiation with small angle X-ray scattering (SAXS), which is a sensitive method for detecting the expected structural changes. We investigated in detail protein systems with different shape morphologies (bovine serum albumin, microtubules), which have been proposed to be susceptible to THz-radiation, under variable parameters (THz wavelength, THz power densities up to 6.8 mW/cm$^2$, protein concentrations). None of the studied systems and conditions revealed structural changes detectable by SAXS suggesting that the expected non-thermal THz-induced effects do not lead to alterations of the overall structures, which are revealed by scattering from dissolved macromolecules. This leaves us with the conclusion that, if such effects are present, these are either local or outside of the spectrum and power range covered by the present study., Published by Macmillan Publishers Limited, part of Springer Nature, [London]

Excitation frequencies in the terahertz (THz) range are expected to lead to functionally relevant domain movements within the biological macromolecules such as proteins. The possibility of examining such movements in an aqueous environment is particularly valuable since here proteins are not deprived of any motional degrees of freedom. Small angle x-ray scattering (SAXS) is a powerful method to study the structure and domain movements of proteins in solution. Here, we present a microfluidic cell for SAXS experiments, which is also transparent for THz radiation. Specifically, cell dimensions and material were optimized for both radiation sources. In addition, the polystyrene cell can be 3D printed and easily assembled. We demonstrate the practicality of our design for SAXS measurements on several proteins in solution.

The P13 macromolecular crystallography beamline, based on the low-emittance source PETRA III, enables X-ray diffraction experiments on macromolecular crystals over a wide wavelength range (0.7–3.1 Å). The beam has a variable focus size and a small divergence enabling data collection on micrometre-sized crystals., The macromolecular crystallography P13 beamline is part of the European Molecular Biology Laboratory Integrated Facility for Structural Biology at PETRA III (DESY, Hamburg, Germany) and has been in user operation since mid-2013. P13 is tunable across the energy range from 4 to 17.5 keV to support crystallographic data acquisition exploiting a wide range of elemental absorption edges for experimental phase determination. An adaptive Kirk­patrick–Baez focusing system provides an X-ray beam with a high photon flux and tunable focus size to adapt to diverse experimental situations. Data collections at energies as low as 4 keV (λ = 3.1 Å) are possible due to a beamline design minimizing background and maximizing photon flux particularly at low energy (up to 1011 photons s−1 at 4 keV), a custom calibration of the PILATUS 6M-F detector for use at low energies, and the availability of a helium path. At high energies, the high photon flux (5.4 × 1011 photons s−1 at 17.5 keV) combined with a large area detector mounted on a 2θ arm allows data collection to sub-atomic resolution (0.55 Å). A peak flux of about 8.0 × 1012 photons s−1 is reached at 11 keV. Automated sample mounting is available by means of the robotic sample changer ‘MARVIN’ with a dewar capacity of 160 samples. In close proximity to the beamline, laboratories have been set up for sample preparation and characterization; a laboratory specifically equipped for on-site heavy atom derivatization with a library of more than 150 compounds is available to beamline users.

At a resting sarcomere length of approximately 2.2 µm bony fish muscles put into rigor in the presence of BDM (2,3-butanedione monoxime) to reduce rigor tension generation show the normal arrangement of myosin head interactions with actin filaments as monitored by low-angle X-ray diffraction. However, if the muscles are put into rigor using the same protocol but stretched to 2.5 µm sarcomere length, a markedly different structure is observed. The X-ray diffraction pattern is not just a weaker version of the pattern at full overlap, as might be expected, but it is quite different. It is compatible with the actin-attached myosin heads being in a different conformation on actin, with the average centre of cross-bridge mass at a higher radius than in normal rigor and the myosin lever arms conforming less to the actin filament geometry, probably pointing back to their origins on their parent myosin filaments. The possible nature of this new rigor cross-bridge conformation is discussed in terms of other well-known states such as the weak binding state and the ‘roll and lock’ mechanism, we speculate that we may have trapped most myosin heads in an early attached strong actin-binding state in the cross-bridge cycle on actin.

An integrated environment for biological small-angle X-ray scattering (BioSAXS) at the high-brilliance P12 synchrotron beamline of the EMBL (DESY, Hamburg) allows for a broad range of solution scattering experiments. Automated hardware and software systems have been designed to ensure that data collection and processing are efficient, streamlined and user friendly., A high-brilliance synchrotron P12 beamline of the EMBL located at the PETRA III storage ring (DESY, Hamburg) is dedicated to biological small-angle X-ray scattering (SAXS) and has been designed and optimized for scattering experiments on macromolecular solutions. Scatterless slits reduce the parasitic scattering, a custom-designed miniature active beamstop ensures accurate data normalization and the photon-counting PILATUS 2M detector enables the background-free detection of weak scattering signals. The high flux and small beam size allow for rapid experiments with exposure time down to 30–50 ms covering the resolution range from about 300 to 0.5 nm. P12 possesses a versatile and flexible sample environment system that caters for the diverse experimental needs required to study macromolecular solutions. These include an in-vacuum capillary mode for standard batch sample analyses with robotic sample delivery and for continuous-flow in-line sample purification and characterization, as well as an in-air capillary time-resolved stopped-flow setup. A novel microfluidic centrifugal mixing device (SAXS disc) is developed for a high-throughput screening mode using sub-microlitre sample volumes. Automation is a key feature of P12; it is controlled by a beamline meta server, which coordinates and schedules experiments from either standard or nonstandard operational setups. The integrated SASFLOW pipeline automatically checks for consistency, and processes and analyses the data, providing near real-time assessments of overall parameters and the generation of low-resolution models within minutes of data collection. These advances, combined with a remote access option, allow for rapid high-throughput analysis, as well as time-resolved and screening experiments for novice and expert biological SAXS users.

Summary The formation and release of outer membrane vesicles (OMVs) is a phenomenon observed in many bacteria, including Legionella pneumophila. During infection, this human pathogen primarily invades alveolar macrophages and replicates within a unique membrane-bound compartment termed Legionella-containing vacuole. In the current study, we analysed the membrane architecture of L. pneumophila OMVs by small-angle X-ray scattering and biophysically characterized OMV membranes. We investigated the interaction of L. pneumophila OMVs with model membranes by Forster resonance energy transfer and Fourier transform infrared spectroscopy. These experiments demonstrated the incorporation of OMV membrane material into liposomes composed of different eukaryotic phospholipids, revealing an endogenous property of OMVs to fuse with eukaryotic membranes. Cellular co-incubation experiments showed a dose- and time-dependent binding of fluorophore-labelled OMVs to macrophages. Trypan blue quenching experiments disclosed a rapid internalization of OMVs into macrophages at 37 and 4°C. Purified OMVs induced tumour necrosis factor-α production in human macrophages at concentrations starting at 300 ng ml−1. Experiments on HEK293-TLR2 and TLR4/MD-2 cell lines demonstrated a dominance of TLR2-dependent signalling pathways. In summary, we demonstrate binding, internalization and biological activity of L. pneumophila OMVs on human macrophages. Our data support OMV membrane fusion as a mechanism for the remote delivery of virulence factors to host cells.

Protein expression and purification 88(2), 243 - 247 (2013). doi:10.1016/j.pep.2013.01.010, The glycolytic enzyme pyruvate kinase (PK) generates ATP from ADP through substrate-level phosphorylation powered by the conversion of phosphoenolpyruvate to pyruvate. In contrast to other bacteria, Enterobacteriaceae, such as pathogenic yersiniae, harbour two pyruvate kinases encoded by pykA and pykF. The individual roles of these isoenzymes are poorly understood. In an attempt to make the Yersinia enterocolitica pyruvate kinases PykA and PykF amenable to structural and functional characterisation, we produced them untagged in Escherichia coli and purified them to near homogeneity through a combination of ion exchange and size exclusion chromatography, yielding more than 180 mg per litre of batch culture. The solution structure of PykA and PykF was analysed through small angle X-ray scattering which revealed the formation of PykA and PykF tetramers and confirmed the binding of the allosteric effector fructose-1,6-bisphosphate (FBP) to PykF but not to PykA, Published by Academic Press, Orlando, Fla.

The subunit ε of bacterial F 1 F O ATP synthases plays an important regulatory role in coupling and catalysis via conformational transitions of its C-terminal domain. Here we present the first low-resolution solution structure of ε of Mycobacterium tuberculosis ( Mt ε) F 1 F O ATP synthase and the nuclear magnetic resonance (NMR) structure of its C-terminal segment ( Mt ε 103–120 ). Mt ε is significantly shorter (61.6 Å) than forms of the subunit in other bacteria, reflecting a shorter C-terminal sequence, proposed to be important in coupling processes via the catalytic β subunit. The C-terminal segment displays an α-helical structure and a highly positive surface charge due to the presence of arginine residues. Using NMR spectroscopy, fluorescence spectroscopy, and mutagenesis, we demonstrate that the new tuberculosis (TB) drug candidate TMC207, proposed to bind to the proton translocating c -ring, also binds to Mt ε. A model for the interaction of TMC207 with both ε and the c -ring is presented, suggesting that TMC207 forms a wedge between the two rotating subunits by interacting with the residues W15 and F50 of ε and the c -ring, respectively. T19 and R37 of ε provide the necessary polar interactions with the drug molecule. This new model of the mechanism of TMC207 provides the basis for the design of new drugs targeting the F 1 F O ATP synthase in M. tuberculosis .

PhzE utilizes chorismate and glutamine to synthesize 2-amino-2-desoxyisochorismate (ADIC) in the first step of phenazine biosynthesis. The PhzE monomer contains both a chorismate-converting menaquinone, siderophore, tryptophan biosynthesis (MST) and a type 1 glutamine amidotransferase (GATase1) domain connected by a 45-residue linker. We present here the crystal structure of PhzE from Burkholderia lata 383 in a ligand-free open and ligand-bound closed conformation at 2.9 and 2.1 Å resolution, respectively. PhzE arranges in an intertwined dimer such that the GATase1 domain of one chain provides NH(3) to the MST domain of the other. This quaternary structure was confirmed by small angle x-ray scattering. Binding of chorismic acid, which was found converted to benzoate and pyruvate in the MST active centers of the closed form, leads to structural rearrangements that establish an ammonia transport channel approximately 25 Å in length within each of the two MST/GATase1 functional units of the dimer. The assignment of PhzE as an ADIC synthase was confirmed by mass spectrometric analysis of the product, which was also visualized at 1.9 Å resolution by trapping in crystals of an inactive mutant of PhzD, an isochorismatase that catalyzes the subsequent step in phenazine biosynthesis. Unlike in some of the related anthranilate synthases, no allosteric inhibition was observed in PhzE. This can be attributed to a tryptophan residue of the protein blocking the potential regulatory site. Additional electron density in the GATase1 active center was identified as zinc, and it was demonstrated that Zn(2+), Mn(2+), and Ni(2+) reduce the activity of PhzE.

Nuclear hormone receptors (NHRs) control numerous physiological processes through the regulation of gene expression. The present study provides a structural basis for understanding the role of DNA in the spatial organization of NHR heterodimers in complexes with coactivators such as Med1 and SRC-1. We have used SAXS, SANS and FRET to determine the solution structures of three heterodimer NHR complexes (RXR-RAR, PPAR-RXR and RXR-VDR) coupled with the NHR interacting domains of coactivators bound to their cognate direct repeat elements. The structures show an extended asymmetric shape and point to the important role played by the hinge domains in establishing and maintaining the integrity of the structures. The results reveal two additional features: the conserved position of the ligand-binding domains at the 5' ends of the target DNAs and the binding of only one coactivator molecule per heterodimer, to RXR's partner.

Subunit alpha of the Escherichia coli F(1)F(O) ATP synthase has been produced, and its low-resolution structure has been determined. The monodispersity of alpha allowed the studies of nucleotide-binding and inhibitory effect of 4-Chloro-7-nitrobenzofurazan (NBD-Cl) to ATP/ADP-binding. Binding constants (K ( d )) of 1.6 microM of bound MgATP-ATTO-647N and 2.9 microM of MgADP-ATTO-647N have been determined from fluorescence correlation spectroscopy data. A concentration of 51 microM and 55 microM of NBD-Cl dropped the MgATP-ATTO-647N and MgADP-ATTO-647N binding capacity to 50% (IC(50)), respectively. In contrast, no effect was observed in the presence of N,N'-dicyclohexylcarbodiimide. As subunit alpha is the homologue of subunit B of the A(1)A(O) ATP synthase, the interaction of NBD-Cl with B of the A-ATP synthase from Methanosarcina mazei Gö1 has also been shown. The data reveal a reduction of nucleotide-binding of B due to NBD-Cl, resulting in IC(50) values of 41 microM and 42 microM for MgATP-ATTO-647N and MgADP-ATTO-647N, respectively.

The bone morphogenetic protein (BMP)-1/tolloid metalloproteinases are evolutionarily conserved enzymes that are fundamental to dorsal–ventral patterning and tissue morphogenesis. The lack of knowledge regarding how these proteinases recognize and cleave their substrates represents a major hurdle to understanding tissue assembly and embryonic patterning. Although BMP-1 and mammalian tolloid (mTLD) are splice variants, it is puzzling why BMP-1, which lacks 3 of the 7 noncatalytic domains present in all other family members, is the most effective proteinase. Using a combination of single-particle electron microscopy, small-angle X-ray scattering, and other biophysical measurements in solution, we show that mTLD, but not BMP-1, forms a calcium-ion-dependent dimer under physiological conditions. Using a domain deletion approach, we provide evidence that EGF2, which is absent in BMP-1, is critical to the formation of the dimer. Based on a combination of structural and functional data, we propose that mTLD activity is regulated by a substrate exclusion mechanism. These results provide a mechanistic insight into how alternative splicing of the Bmp1 gene produces 2 proteinases with differing biological activities and have broad implications for regulation of BMP-1/mTLD and related proteinases during BMP signaling and tissue assembly.

The protein family of membrane-anchored extended synaptotagmin-like proteins (E-Syts) was recently discovered in humans. E-Syt1 to 3 each contain at least one transmembrane domain and three or five C2 domains. To investigate the whole C2 area of murine E-Syt2, highly pure recombinant E-Syt2 (rE-Syt2) covering all three C2 domains was isolated. The structure of rE-Syt2 was studied by small-angle X-ray scattering (SAXS) providing a three-dimensional image of a protein with three C2 domains. Calcium binding of rE-Syt2 triggered structural rearrangements and initiated reversible multimerization of the protein in vitro. Quantitative analysis of the calcium binding revealed an apparent binding constant of 100 μM. This is the first structural study of a multi-C2 protein, presumably involved in Ca-dependent signalling events.

The physico-chemical properties of three fully hydrated monoacyl maltoside glycolipids were investigated with Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS). The different synthesized maltoside glycoconjugates vary in the length and saturation of the fatty acid moiety, whereas the constant head group region contains a beta-linked maltose with a OC(2)-NH spacer. The compounds with saturated acyl chains showed a complex pattern of temperature-dependent behaviour, regarding the adopted three-dimensional aggregate structure of the molecules and the main phase transition from the gel to liquid crystalline phase of the acyl chains. A substitution of the saturated acyl chain with an unsaturated acyl chain led to a complete change of the structural preferences, from a high ordered stacking of the bilayers to an unilamellar arrangement of completely disordered and fluid membranes. The presence of the NH group in the spacer, compared to the compounds lacking the NH group allows the formation of a hydrogen bonding network, which influences the observed phase properties. The results of these studies of the hydrated monoacylated maltose glycolipids are discussed in relation to the thermotropic phase properties of the pure compounds in the absence of water.

An automated sample changer for small-angle X-ray scattering (SAXS) on protein in solution is reported. The technical implementation and integration to a synchrotron-based SAXS beamline is described., There is a rapidly increasing interest in the use of synchrotron small-angle X-ray scattering (SAXS) for large-scale studies of biological macromolecules in solution, and this requires an adequate means of automating the experiment. A prototype has been developed of an automated sample changer for solution SAXS, where the solutions are kept in thermostatically controlled well plates allowing for operation with up to 192 samples. The measuring protocol involves controlled loading of protein solutions and matching buffers, followed by cleaning and drying of the cell between measurements. The system was installed and tested at the X33 beamline of the EMBL, at the storage ring DORIS-III (DESY, Hamburg), where it was used by over 50 external groups during 2007. At X33, a throughput of approximately 12 samples per hour, with a failure rate of sample loading of less than 0.5%, was observed. The feedback from users indicates that the ease of use and reliability of the user operation at the beamline were greatly improved compared with the manual filling mode. The changer is controlled by a client–server-based network protocol, locally and remotely. During the testing phase, the changer was operated in an attended mode to assess its reliability and convenience. Full integration with the beamline control software, allowing for automated data collection of all samples loaded into the machine with remote control from the user, is presently being implemented. The approach reported is not limited to synchrotron-based SAXS but can also be used on laboratory and neutron sources.

An understanding of details of the interaction mechanisms of bacterial endotoxins (lipopolysaccharide, LPS) with the oxygen transport protein hemoglobin is still lacking, despite its high biological relevance. Here, a biophysical investigation into the endotoxin:hemoglobin interaction is presented which comprises the use of various rough mutant LPS as well as free lipid A; in addition to the complete hemoglobin molecule from fetal sheep extract, also the partial structure α-chain and the heme-free sample are studied. The investigations comprise the determination of the gel-to-liquid crystalline phase behaviour of the acyl chains of LPS, the ultrastructure (type of aggregate structure and morphology) of the endotoxins, and the incorporation of the hemoglobins into artificial immune cell membranes and into LPS. Our data suggest a model for the interaction between Hb and LPS in which hemoglobins do not react strongly with the hydrophilic or with the hydrophobic moiety of LPS, but with the complete endotoxin aggregate. Hb is able to incorporate into LPS with the longitudinal direction parallel to the lipid A double-layer. Although this does not lead to a strong disturbance of the LPS acyl chain packing, the change of the curvature leads to a slightly conical molecular shape with a change of the three-dimensional arrangement from unilamellar into cubic LPS aggregates. Our previous results show that cubic LPS structures exhibit strong endotoxic activity. The property of Hb on the physical state of LPS described here may explain the observation of an increase in LPS-mediating endotoxicity due to the action of Hb.

The full-length, two-domain response regulator RegX3 from Mycobacterium tuberculosis is a dimer stabilized by three-dimensional domain swapping. Dimerization is known to occur in the OmpR/PhoB subfamily of response regulators upon activation but has previously only been structurally characterized for isolated receiver domains. The RegX3 dimer has a bipartite intermolecular interface, which buries 2357 A(2) per monomer. The two parts of the interface are between the two receiver domains (dimerization interface) and between a composite receiver domain and the effector domain of the second molecule (interdomain interface). The structure provides support for the importance of threonine and tyrosine residues in the signal transduction mechanism. These residues occur in an active-like conformation stabilized by lanthanum ions. In solution, RegX3 exists as both a monomer and a dimer in a concentration-dependent equilibrium. The dimer in solution differs from the active form observed in the crystal, resembling instead the model of the inactive full-length response regulator PhoB.

Bluetongue virus (BTV) non-structural protein 2 (NS2) belongs to a class of highly conserved proteins found in members of the orbivirus genus of the reoviridae. NS2 forms large multimeric complexes, localizes to cytoplasmic inclusion bodies in the infected cells and binds non-sequence specifically single-stranded RNA (ssRNA). Due to its ability to bind ssRNA, it has been suggested that the protein is involved in the selection and condensation of the BTV ssRNA segments prior to genome encapsidation. We have previously determined the crystal structure of the 177 amino acid N-terminal domain, sufficient for ssRNA binding ability of NS2, to 2.4 A resolution. The C-terminal domain, as determined at low resolution using small-angle X-ray scattering, is an elongated dimer. This domain expressed in insect cells is phosphorylated at S249 and S259. Electron microscopy of the full-length protein shows a variety of species with the largest having a ring-like appearance. Based on the electron micrographs, the crystal structure of the N-terminal domain and the structure of the C-terminal domain reported here, we propose a model for a decamer of the full-length protein. This decamer changes conformation upon binding of a non-hydrolysable ATP analogue.

The small-angle X-ray scattering beamline X33 of the European Molecular Biology Laboratory (EMBL) at the DORIS III storage ring [Deutsches Elektronen Synchrotron (DESY) Hamburg] was used for more than two decades to study the structure of non-crystalline biological systems. During recent years the beamline's scope has changed and is now predominantly used to analyze solutions of biological macromolecules. Owing to renewed interest in solution scattering studies from the biological community, the workload on the beamline has steadily increased. A major upgrade of X33 was performed to improve the beamline stability and data quality, to shorten the measurement time and to ensure user-friendly operation. The upgrade involved all major components of the beamline, including the optical system (monochromator, mirror, slits, beam monitors), electronics, control and acquisition software, X-ray detector system and the sample environment. The upgrade improved the brilliance by a factor of about three and the measuring time was reduced by a factor of seven. The knowledge and experience gained during the implementation of the upgrades to X33, may aid the design process for the BioSAXS beamline to be constructed for the PETRA-3 facility at DESY.

Acta crystallographica / D 71(1), 67 - 75(2015). doi:10.1107/S1399004714026959, Small-angle X-ray scattering (SAXS) of macromolecules in solution is in increasing demand by an ever more diverse research community, both academic and industrial. To better serve user needs, and to allow automated and high-throughput operation, a sample changer (BioSAXS Sample Changer) that is able to perform unattended measurements of up to several hundred samples per day has been developed. The Sample Changer is able to handle and expose sample volumes of down to 5 µl with a measurement/cleaning cycle of under 1 min. The samples are stored in standard 96-well plates and the data are collected in a vacuum-mounted capillary with automated positioning of the solution in the X-ray beam. Fast and efficient capillary cleaning avoids cross-contamination and ensures reproducibility of the measurements. Independent temperature control for the well storage and for the measurement capillary allows the samples to be kept cool while still collecting data at physiological temperatures. The Sample Changer has been installed at three major third-generation synchrotrons: on the BM29 beamline at the European Synchrotron Radiation Facility (ESRF), the P12 beamline at the PETRA-III synchrotron (EMBL@PETRA-III) and the I22/B21 beamlines at Diamond Light Source, with the latter being the first commercial unit supplied by Bruker ASC., Published by Wiley-Blackwell, Oxford

The presence of an isoform of glyceraldehyde-3-phosphate dehydrogenase (kmGAPDH1p) associated with the cell wall of a flocculent strain of Kluyveromyces marxianus was the first report of a non-cytosolic localization of a glycolytic enzyme, but the mechanism by which the protein is transported to the cell surface is not known. To identify structural features that could account for the multiple localizations of the protein, the three-dimensional structure of kmGAPDH1p was determined by x-ray crystallography and small angle x-ray scattering. The x-ray crystallographic structure of kmGAPDH1p revealed a dimer, although all GAPDH homologs studied thus far have a tetrameric structure with 222 symmetry. Interestingly, the structure of kmGAPDH1p in solution revealed a tetramer with a 70 degrees tilt angle between the dimers. Moreover, the separation between the centers of the dimers composing the kmGAPDH1p tetramer diminished from 34 to 30 A upon NAD(+) binding, this latter value being similar to the observed in the crystallographic models of GAPDH homologs. The less compact structure of apo-kmGAPDH1p could already be the first image of the transition intermediate between the tetramer observed in solution and the dimeric form found in the crystal structure, which we postulate to exist in vivo because of the protein's multiple subcellular localizations in this yeast species.

Fibrillin-1 is a 330-kDa multidomain extracellular matrix protein that polymerizes to form 57-nm periodic microfibrils, which are essential for all tissue elasticity. Fibrillin-1 is a member of the calcium-binding EGF repeat family and has served as a prototype for structural analyses. Nevertheless, both the detailed structure of fibrillin-1 and its organization within microfibrils are poorly understood because of the complexity of the molecule and the resistance of EGF arrays to crystallization. Here, we have used small-angle x-ray scattering and light scattering to analyze the solution structure of human fibrillin-1 and to produce ab initio structures of overlapping fragments covering 90% of the molecule. Rather than exhibiting a uniform rod shape as current models predict, the scattering data revealed a nonlinear conformation of calcium-binding EGF arrays in solution. This finding has major implications for the structures of the many other EGF-containing extracellular matrix and membrane proteins. The scattering data also highlighted a very compact, globular region of the fibrillin-1 molecule, which contains the integrin and heparan sulfate-binding sites. This finding was confirmed by calculating a 3D reconstruction of this region using electron microscopy and single-particle image analysis. Together, these data have enabled the generation of an improved model for microfibril organization and a previously undescribed mechanism for microfibril extensibility.

Bacterial class I release factors (RFs) are seen by cryo-electron microscopy (cryo-EM) to span the distance between the ribosomal decoding and peptidyl transferase centers during translation termination. The compact conformation of bacterial RF1 and RF2 observed in crystal structures will not span this distance, and large structural rearrangements of RFs have been suggested to play an important role in termination. We have collected small-angle X-ray scattering (SAXS) data from E. coli RF1 and from a functionally active truncated RF1 derivative. Theoretical scattering curves, calculated from crystal and cryo-EM structures, were compared with the experimental data, and extensive analyses of alternative conformations were made. Low-resolution models were constructed ab initio, and by rigid-body refinement using RF1 domains. The SAXS data were compatible with the open cryo-EM conformation of ribosome bound RFs and incompatible with the crystal conformation. These conclusions obviate the need for assuming large conformational changes in RFs during termination.

Previous low-angle X-ray diffraction studies of various vertebrate skeletal muscles have shown the presence of two rich layer-line patterns, one from the myosin heads and based on a 429 A axial repeat, and one from actin filaments and based on a repeat of about 360-370 A. In addition, meridional intensities have been seen from C-protein (MyBP-C; at about 440 A and its higher orders) and troponin (at about 385 A and its orders). Using preparations of intact, relaxed, bony fish fin muscles and the ID-02 low-angle X-ray camera at the ESRF with a 10 m camera length we have now seen numerous, hitherto unreported, sampled, X-ray layer-lines many of which do not fit onto the previously observed repeats and which require interpretation. The new reflections all fall on the normal ("vertical") hexagonal lattice row-lines in the highly sampled, almost "crystalline", low-angle diffraction X-ray patterns from bony fish muscle, indicating that they all arise from the muscle A-band. However, they do not fall on a single axial repeat. In direct confirmation of our previous analysis, some of these new reflections are explained by the interaction in resting muscle between the N-terminal ends of myosin-bound C-protein molecules with adjacent actin filaments, possibly through the Pro-Ala-rich region. Other newly observed reflections lie on a much longer repeat, but they are most easily interpreted in terms of the arrangement of troponin on the actin filaments. If this is so, then the implication is that the actin filaments and their troponin complexes are systematically arranged in the fish muscle A-band lattice relative to the myosin head positions, and that these newly observed X-ray reflections, when fully analysed, will report on the shape and distribution of troponin molecules in the resting muscle A-band. The less certain contributions of titin and nebulin to these new reflections have also been tested and are described. Many of the new reflections do not appear to come from these known structures. There must be structural features of the A-band that have not yet been described.

The formation and release of outer membrane vesicles (OMVs) is a phenomenon observed in many bacteria, including Legionella pneumophila. During infection, this human pathogen primarily invades alveolar macrophages and replicates within a unique membrane-bound compartment termed Legionella-containing vacuole. In the current study, we analysed the membrane architecture of L. pneumophila OMVs by small-angle X-ray scattering and biophysically characterized OMV membranes. We investigated the interaction of L. pneumophila OMVs with model membranes by Förster resonance energy transfer and Fourier transform infrared spectroscopy. These experiments demonstrated the incorporation of OMV membrane material into liposomes composed of different eukaryotic phospholipids, revealing an endogenous property of OMVs to fuse with eukaryotic membranes. Cellular co-incubation experiments showed a dose- and time-dependent binding of fluorophore-labelled OMVs to macrophages. Trypan blue quenching experiments disclosed a rapid internalization of OMVs into macrophages at 37 and 4 °C. Purified OMVs induced tumour necrosis factor-α production in human macrophages at concentrations starting at 300 ng ml(-1). Experiments on HEK293-TLR2 and TLR4/MD-2 cell lines demonstrated a dominance of TLR2-dependent signalling pathways. In summary, we demonstrate binding, internalization and biological activity of L. pneumophila OMVs on human macrophages. Our data support OMV membrane fusion as a mechanism for the remote delivery of virulence factors to host cells.

Using the high flux of a third generation synchrotron sources at ESRF and ELETTRA, structural changes of the chaperonin system GroE were analyzed by time-resolved small angle scattering. A fast mixing device were established which permits determination of the solution scattering parameters of the E.coli chaperonin system GroE in time slices of 300msec. Using this device, the r eaction pathway of the two component system, GroEL and GroES was analyzed.

Durum wheat metallothionein (dMT), a plant type 1 metallothionein, with a long “hinge” region between metal coordinating cysteine clusters, is efficient cadmium (Cd) chelator. In this work, biophysical features of purified recombinant holo-dMT, its demetallated form (apo-dMT) and the reconstituted Cd5-dMT are compared to obtain insight into the structure and metal binding features of this protein. Results show that the purified holo-dMT is polydisperse and has 5.3±0.5 Cd2+ ions per molecule. Demetallation followed by size exclusion chromatography yields homogeneous apo-dMT which can be reconstituted with Cd2+. Synchrotron small angle X-ray scattering (SAXS) demonstrates that apo-dMT, at pH 2.0, is flexible and extended in solution. According to UV-vis, CD and native-PAGE data conformation of apo-dMT is sensitive to pH changes in the range 2.0 to 8.0. Reconstitution of the apo-protein at pH 8.0, with Cd2+ appears to take place in two phases during which first the monomer is folded to accommodate 5 Cd2+ ions and then reorganization into oligomeric forms allows incorporation of further metal ions. SAXS data indicate that holo-dMT has limited flexibility in structure, but its conformation is significantly more compact than that of apo-dMT. Results of UV-vis and circular dichroism spectroscopy show that the in vitro folded protein is structurally different from the purified holo-dMT with the same number of Cd2+ ions.This work was supported by Sabanci University Internal Research Fund Project No. IACF08-00514 and by the bilateral program TUBITAK-Julich Research Center projects TBAG-U-155 and TBAG-U-157.

The 95 kDa subunit a of eukaryotic V-ATPases consists of a C-terminal, ion-translocating part and an N-terminal cytosolic domain. The latter's N-terminal domain (~40 kDa) is described to bind in an acidification-dependent manner with cytohesin-2 (ARNO), giving the V-ATPase the putative function as pH-sensing receptor. Recently, the solution structure of the very N-terminal segment of the cytosolic N-terminal domain has been solved. Here we produced the N-terminal truncated form SCa₁₀₄₋₃₆₃ of the N-terminal domain (SCa₁₋₃₆₃) of the Saccharomyces cerevisiae V-ATPase and determined its low resolution solution structure, derived from SAXS data. SCa₁₀₄₋₃₆₃ shows an extended S-like conformation with a width of about 3.88 nm and a length of 11.4 nm. The structure has been superimposed into the 3D reconstruction of the related A₁A₀ ATP synthase from Pyrococcus furiosus, revealing that the SCa₁₀₄₋₃₆₃ fits well into the density of the collar structure of the enzyme complex. To understand the importance of the C-terminus of the protein SCa₁₋₃₆₃, and to determine the localization of the N- and C-termini in SCa₁₀₄₋₃₆₃, the C-terminal truncated form SCa₁₀₆₋₃₂₄ was produced and analyzed by SAXS. Comparison of the SCa₁₀₄₋₃₆₃ and SCa₁₀₆₋₃₂₄ shapes showed that the additional loop region in SCa₁₀₄₋₃₆₃ consists of the C-terminal residues. Whereas SCa₁₀₄₋₃₆₃ is monomeric in solution, SCa₁₀₆₋₃₂₄ forms a dimer, indicating the importance of the very C-terminus in structure formation. Finally, the solution structure of SCa₁₀₄₋₃₆₃ and SCa₁₀₆₋₃₂₄ will be discussed in terms of the topological arrangement of subunit a and cytoheisn-2 in V-ATPases.

The tropoelastin monomer undergoes stages of association by coacervation, deposition onto microfibrils, and cross-linking to form elastic fibers. Tropoelastin consists of an elastic N-terminal coil region and a cell-interactive C-terminal foot region linked together by a highly exposed bridge region. The bridge region is conveniently positioned to modulate elastic fiber assembly through association by coacervation and its proximity to dominant cross-linking domains. Tropoelastin constructs that either modify or remove the entire bridge and downstream regions were assessed for elastogenesis. These constructs focused on a single alanine substitution (R515A) and a truncation (M155n) at the highly conserved arginine 515 site that borders the bridge. Each form displayed less efficient coacervation, impaired hydrogel formation, and decreased dermal fibroblast attachment compared to wild-type tropoelastin. The R515A mutant protein additionally showed reduced elastic fiber formation upon addition to human retinal pigmented epithelium cells and dermal fibroblasts. The small-angle X-ray scattering nanostructure of the R515A mutant protein revealed greater conformational flexibility around the bridge and C-terminal regions. This increased flexibility of the R515A mutant suggests that the tropoelastin R515 residue stabilizes the structure of the bridge region, which is critical for elastic fiber assembly.

A setup is presented for automated high-throughput measurements of small-angle X-ray scattering (SAXS) from macromolecular solutions on the bending-magnet beamline X33 of EMBL at the storage ring DORIS-III (DESY, Hamburg). A new multi-cell compartment allows for rapid switching between in-vacuum and in-air operation, for digital camera assisted control of cell filling and for colour sample illumination. The beamline is equipped with a Pilatus 1 M-W pixel detector for SAXS and a Pilatus 300 k-W for wide-angle scattering (WAXS), and results from the use of the Pilatus detectors for scattering studies are reported. The setup provides a broad resolution range from 100 to 0.36 nm without the necessity of changing the sample-to-detector distance. A new optimized robotic sample changer is installed, permitting rapid and reliable automated sample loading and cell cleaning with a required sample volume of 40 µl. All the devices are fully integrated into the beamline control software system, ensuring fully automated and user-friendly operation (attended, unattended and remote) with a throughput of up to 15 measurements per hour.

Vacuolar ATPases use the energy derived from ATP hydrolysis, catalyzed in the A 3 B 3 sector of the V 1 ATPase to pump protons via the membrane-embedded V O sector. The energy coupling between the two sectors occurs via the so-called central stalk, to which subunit F does belong. Here we present the first low resolution structure of recombinant subunit F (Vma7p) of a eukaryotic V-ATPase from Saccharomyces cerevisiae , analyzed by small angle X-ray scattering (SAXS). The protein is divided into a 5.5 nm long egg-like shaped region, connected via a 1.5 nm linker to a hook-like segment at one end. Circular dichroism spectroscopy revealed that subunit F comprises of 43% α-helix, 32% β-sheet and a 25% random coil arrangement. To determine the localization of the N- and C-termini in the protein, the C-terminal truncated form of F, F 1–94 was produced and analyzed by SAXS. Comparison of the F 1–94 shape with the one of subunit F showed the missing hook-like region in F 1–94 , supported by the decreased D max value of F 1–94 (7.0 nm), and indicating that the hook-like region consists of the C-terminal residues. The NMR solution structure of the C-terminal peptide, F 90–116 , was solved, displaying an α-helical region between residues 103 and 113. The F 90–116 solution structure fitted well in the hook-like region of subunit F. Finally, the arrangement of subunit F within the V 1 ATPase is discussed.

Lipopolysaccharides (LPSs) from Gram-negative bacteria are strong elicitors of the human immune systems. There is strong evidence that aggregates and not monomers of LPS play a decisive role at least in the initial stages of cell activation of immune cells such as mononuclear cells. In previous reports, it was shown that the biologically most active part of enterobacterial LPS, hexa-acyl bisphosphorylated lipid A, adopts a particular supramolecular conformation, a cubic aggregate structure. However, little is known about the size and morphology of these aggregates, regarding the fact that LPS may have strong variations in the length of the saccharide chains (various rough mutant and smooth-form LPS). Thus, in the present paper, several techniques for the determination of details of the aggregate morphology such as freeze-fracture and cryo-electron microscopy, analytical ultracentrifugation, laser backscattering analysis, and small-angle X-ray scattering were applied for various endotoxin (lipid A and different LPS) preparations. The data show a variety of different morphologies not only for different endotoxins but also when comparing different applied techniques. The data are interpreted with respect to the suitability of the single techniques, in particular on the basis of available literature data.

The addition of glycosylphosphatidylinositol (GPI) anchors to eukaryotic proteins in the lumen of the endoplasmic reticulum is catalyzed by the transamidase complex, composed of at least five subunits (PIG-K, PIG-S, PIG-T, PIG-U and GPAA1). Here PIG-K(24-337) and PIG-S(38-467) from yeast, including the residues 24-337 and 38-467 of the entire 411 and 534 residue protein, respectively, was produced in Escherichia coli and purified to homogeneity. Analysis of secondary structure by circular dichroism spectroscopy showed that yPIG-K(24-377) comprises 52% α-helix and 12% β-sheet, whereas yPIG-S(38-467) involves 58% α-helix and 18% β-sheet. The radius of gyration (R(g)) and the maximum size (D(max)) of both proteins have been analyzed by small angle X-ray scattering (SAXS) and determined to be 2.64±0.3 and 10.3±0.1 nm (yPIG-K(24-377)) as well as 3.06±0.02 nm (R(g)) and 16.9±0.4 nm (D(max)) in the case of yPIG-S(38-467), respectively. Using an ab initio approach, the first low-resolution solution structures of both proteins were restored. yPIG-K(24-377) is an elongated particle consisting of an egg-like portion and a small globular segment linked together by an 1.9 nm long stalk. yPIG-S(38-467) forms an elongated molecule in solution with a larger domain of 10.1 nm in length, a diameter of 9.1 nm and a smaller domain of 6.7 nm in length and 3.4 nm in width. The two domains of yPIG-S(38-467) are tilted relative to each other. Finally, the arrangements of PIG-K and PIG-S inside the ensemble of the transamidase complex are discussed.

The innate immune response provides a critical first-line defense against Mycobacterium tuberculosis, an intracellular pathogen that represents a major health threat world-wide. A synthetic lipopeptide (LP) mimicking the lipid moiety of the cell-wall associated 19-kDa lipoprotein from M. tuberculosis has recently been assigned an important role in the induction of an antibacterial immune response in host macrophages. Here, we present experimental data on the biological activities and the biophysical mechanisms underlying cell activation by synthetic 19-kDa M. tuberculosis-derived lipopeptide (Mtb-LP). Investigation of the geometry of the LP (i.e. the molecular conformation and supramolecular aggregate structure) and the preference for membrane intercalation provide an explanation for the biological activities of the mycobacterial LP. Cell activation by low concentrations of Mtb-LP was enhanced by the lipopolysaccharide—binding protein and CD14. However, surprisingly, we found that activation of human macrophages to induce pro- as well as antiinflammatory mediators (tumor necrosis factor(TNF)-α, Interleukin(IL)-6, IL-8, and IL-10) in response to the Mtb-LP is strongly reduced in the presence of serum. This observation could be confirmed for the immune response of murine macrophages which showed a strongly enhanced TNF-α release in the absence of serum, suggesting that the molecular mechanisms of immune recognition of the Mtb-LP are tailored to the ambient conditions of the lung.

International audience; ALIX recruits ESCRT-III CHMP4 and is involved in membrane remodeling during endosomal receptor sorting, budding of some enveloped viruses, and cytokinesis. We show that ALIX dimerizes via the middle domain (ALIX(-V)) in solution. Structural modeling based on small angle X-ray scattering (SAXS) data reveals an elongated crescent-shaped conformation for dimeric ALIX lacking the proline-rich domain (ALIX(BRO1-V)). Mutations at the dimerization interface prevent dimerization and induce an open elongated monomeric conformation of ALIX(-V) as determined by SAXS modeling. ALIX dimerizes in vivo and dimeric ALIX colocalizes with CHMP4B upon coexpression. We show further that ALIX dimerization affects HIV-1 budding. C-terminally truncated activated CHMP4B retaining the ALIX binding site forms linear, circular, and helical filaments in vitro, which can be bridged by ALIX. Our data suggest that dimeric ALIX represents the active form that interacts with ESCRT-III CHMP4 polymers and functions as a scaffolding protein during membrane remodeling processes.

Chemistry 15, 12672-12680 (2009). doi:10.1002/chem.200901410, Published by Wiley-VCH, Weinheim

A series of monoacylated glycolipids with even-numbered acyl chain lengths ranging from saturated C11 to C15 and an unsaturated C17:1 fatty acid connected by an amide in linkage to the disaccharide head groups maltose, melibiose and lactose were synthesized. The structural polymorphism of the glycolipids was investigated using Fourier-transform infrared spectroscopy and differential scanning calorimetry for the detection of the gel to liquid-crystalline acyl chain melting behaviour and small-angle X-ray scattering for the elucidation of the physical structure of the lipid aggregates. Also, the phase morphology was studied by polarizing microscopy in contact preparations. The data clearly show the existence of uni- and multilamellar structures. Although only one acyl chain is present, there is no evidence for the existence of micelles – of spherical or of cylindrical (HI) type – or of interdigitated phases. The preference for lamellar phases seems to be correlated with the intrinsic high conformational order of the amide linkage of these compounds which inhibits the formation of highly curved structures.

De novo design and chemical synthesis of proteins and their mimics are central approaches for understanding protein folding and accessing proteins with novel functions. We have previously described carbohydrates as templates for the assembly of artificial proteins, so-called carboproteins. Here, we describe the preparation and structural studies of three alpha-helical bundle carboproteins, which were assembled from three different carbohydrate templates and one amphiphilic hexadecapeptide sequence. This heptad repeat peptide sequence has been reported to lead to 4-alpha-helix formation. The low resolution solution structures of the three carboproteins were analyzed by means of small-angle X-ray scattering (SAXS) and synchrotron radiation circular dichroism (SRCD). The ab initio SAXS data analysis revealed that all three carboproteins adopted an unexpected 3+1-helix folding topology in solution, while the free peptide formed a 3-helix bundle. This finding is consistent with the calculated alpha-helicities based on the SRCD data, which are 72 and 68 % for two of the carboproteins. The choice of template did not affect the overall folding topology (that is for the 3+1 helix bundle) the template did have a noticeable impact on the solution structure. This was particularly evident when comparing 4-helix carboprotein monomers with the 2x2-helix carboprotein dimer as the latter adopted a more compact conformation. Furthermore, the clear conformational differences observed between the two 4-helix (3+1) carboproteins based on D-altropyranoside and D-galactopyranoside support the notion that folding is affected by the template, and subtle variations in template distance-geometry design may be exploited to control the solution fold. In addition, the SRCD data show that template assembly significantly increases thermostability.

The Grb2-related adaptor protein GADS plays a central role during the initial phases of signal transduction in T lymphocytes. GADS possesses N- and C-terminal Src homology 3 (SH3) domains flanking a central Src homology 2 (SH2) domain and a 126-residue region rich in glutamine and proline residues, presumed to be largely unstructured. The SH2 domain of GADS binds the adaptor protein LAT; the C-terminal SH3 domain pairs GADS to the adaptor protein SLP-76, whereas the function of the central region is unknown. High-resolution three-dimensional models are available for the isolated SH2 and C-terminal SH3 domains in complex with their respective binding partners, LAT and SLP-76. However, in part because of its intrinsic instability, there is no structural information for the entire GADS molecule. Here, we report the low-resolution structure of full-length GADS in solution using small-angle x-ray scattering (SAXS). Based on the SAXS data, complemented by gel filtration experiments, we show that full-length GADS is monomeric in solution and that its overall structural parameters are smaller than those expected for a protein with a long unstructured region. Ab initio and rigid body modeling of the SAXS data reveal that full-length GADS is a relatively compact molecule and that the potentially unstructured region retains a significant degree of structural order. The biological function of GADS is discussed based on its overall structure.

Bacteria have evolved elaborate communication strategies to co-ordinate their group activities, a process termed quorum sensing (QS). Pseudomonas aeruginosa is an opportunistic pathogen that utilizes QS for diverse activities, including disease pathogenesis. P. aeruginosa has evolved a novel communication system in which the signal molecule 2-heptyl-3-hydroxy-4-quinolone (Pseudomonas Quinolone Signal, PQS) is trafficked between cells via membrane vesicles (MVs). Not only is PQS packaged into MVs, it is required for MV formation. Although MVs are involved in important biological processes aside from signalling, the molecular mechanism of MV formation is unknown. To provide insight into the molecular mechanism of MV formation, we examined the interaction of PQS with bacterial lipids. Here, we show that PQS interacts strongly with the acyl chains and 4'-phosphate of bacterial lipopolysaccharide (LPS). Using PQS derivatives, we demonstrate that the alkyl side-chain and third position hydroxyl of PQS are critical for these interactions. Finally, we show that PQS stimulated purified LPS to form liposome-like structures. These studies provide molecular insight into P. aeruginosa MV formation and demonstrate that quorum signals serve important non-signalling functions.

Endosomal sorting complexes required for transport (ESCRT-0, ESCRT-I, ESCRT-II, and ESCRT-III) are selectively recruited to cellular membranes to exert their function in diverse processes, such as multivesicular body biogenesis, enveloped virus budding, and cytokinesis. ESCRT-III is composed of members of the charged multivesicular body protein (CHMP) family--cytosolic proteins that are targeted to membranes via yet unknown signals. Membrane targeting is thought to result in a membrane-associated protein network that presumably acts at a late budding step. Here we provide structural evidence based on small-angle X-ray scattering data that ESCRT-III CHMP3 can adopt two conformations in solution: a closed globular form that most likely represents the cytosolic conformation and an open extended conformation that might represent the activated form of CHMP3. Both the closed and open conformations of CHMP3 interact with AMSH with high affinity. Although the C-terminal region of CHMP3 is required for AMSH interaction, a peptide thereof reveals only weak binding to AMSH, suggesting that other regions of CHMP3 contribute to the high-affinity interaction. Thus, AMSH, including its MIT (microtubule interacting and transport) domain, interacts with ESCRT-III CHMP3 differently from reported Vps4 MIT domain-CHMP protein interactions.