Search

Objectives: To compare the mandibular posterior space available before treatment and the distance of molar distalization achieved after mandibular dentition distalization with microimplants., Materials and Methods: A total of 66 Class I or III adult patients (mean age = 24.46 ± 4.89 years) who underwent molar distalization using microimplants were retrospectively included. The posterior space available distal to the second molar before treatment and the distance of distalization achieved after treatment were measured using axial cone-beam computed tomography images (0, 2, 4, and 6 mm apical to the second molar root furcation). Changes in lingual cortical thickness and molar root length after treatment were examined. Paired t-test or Wilcoxon signed-rank test was performed to compare measurements before and after treatment. Spearman correlation analysis was performed to assess the relationship between thinning of the cortical plate and root resorption., Results: Achieved distalization distance was significantly greater than pretreatment posterior space available by 0.8 mm at all root levels (P < .001). The difference was greater toward the root apex level and greater in the Class III group than the Class I group. Lingual cortical thickness was significantly decreased after treatment along with resorption of the second molar distal root (P < .001). In addition, a positive correlation was found between thinning of the cortical plate and distal root resorption of the molar (P < .001)., Conclusions: Achieved distalization distance of the mandibular molar using microimplants was greater than the pretreatment posterior space available. Thinning of the lingual cortex and root resorption were observed after distalization., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

Background: The aim of this study was to compare and evaluate three AI-assisted cephalometric analysis platforms-CephX, WeDoCeph, and WebCeph-with the traditional digital tracing method using NemoCeph software., Material and Method: A total of 1500 lateral cephalometric films that met the inclusion criteria were classified as Class I, Class II, and Class III. Subsequently, 40 patients were randomly selected from each class. These selected films were uploaded to 3 AI-assisted cephalometric analysis platforms and analyzed without any manual intervention. The same films were also analyzed by an orthodontist using the NemoCeph program., Results: The results revealed significant differences in key angular measurements (ANB, FMA, IMPA, and NLA) across Class I, II, and III patients when comparing the four cephalometric analysis methods (WebCeph, WeDoCeph, CephX, and NemoCeph). Notably, ANB (p < 0.05), FMA (p < 0.001), IMPA (p < 0.001), and NLA (p < 0.001) varied significantly. Linear measurements also differed, with significant differences in U1-NA (p = 0.002) and Co-A (p = 0.002) in certain classes. Repeated measurement analysis revealed variation in SNA (p = 0.011) and FMA (p = 0.030), particularly in the Class II NemoCeph group, suggesting method-dependent variability., Conclusion: AI-assisted cephalometric analysis platforms such as WebCeph, WeDoCeph, and CephX give rise to notable variation in accuracy and reliability compared to traditional manual digital tracing, specifically in terms of angular and linear measurements. These results emphasize the importance of meticulous selection and assessment of analysis methods in orthodontic diagnostics and treatment planning., (© 2024. The Author(s).)

Introduction: Social media enhanced access to information, making it easier to share dental treatments., Objective: This study aimed to conduct a descriptive analysis of the clinical cases published on the Align® Global Gallery platform., Material and Methods: A retrospective cross-sectional study of 1,582 cases was conducted, data extracted referred to the following basic information: case number; patient's age; reported gender; Invisalign® package modality; treatment time; aligner exchange protocol; total number of aligners per arch; type of retainers, and inclusion of initial and final panoramic and cephalometric radiographs., Results: The majority were young (mean age 24.6 years, SD = 11.6), female patients (69.1%) with Class I malocclusion (39.4%) and crowding (77.9%). Comprehensive treatment was common (66.5%), with an average treatment time of 18 months (SD = 8.56; 95% CI = 17.6-18.5), with the most frequently reported aligner exchange protocol being 7 days (49.5%), with an average of 50.6 aligners in the upper arch (SD = 26.9; 95% CI = 49.2-51.9), and 48.7 in the lower arch (SD = 26.1; 95% CI = 47.4-50.0). Arch expansion (66.9%) and interproximal reduction (59.7%) were common approaches, while extractions were rare (4.3%). In most cases, initial lateral cephalometric (80.4%) and panoramic (93.3%) radiographs were presented. However, the final radiograph count dropped, with lateral cephalometric at 69.2%, and panoramic at 82.2% of cases., Conclusion: Cases in the Align®Global Gallery mostly feature Class I patients with crowded teeth, treated with expansion and interproximal reduction. The absence of standardized information and post-treatment data restricts the applicability of these findings to broader Invisalign® treatment trends.

Background: This study aims to verify Bolton's values for tooth size ratios and to evaluate possible relationships to different occlusal traits using precise digital measurement methods., Materials and Methods: Including 1000 consecutively selected patients from three study centres a digital, partially automated model analysis was performed utilizing the software OnyxCeph. The measurements comprised tooth width for calculation of anterior (AR) and overall ratio (OR) as a percentage, arch width, length, perimeter, overjet, overbite, space analysis in millimetre and the assessment of the angle classification., Results: AR and OR were significantly increased compared to Bolton's ratios of 77.2% (AR) and 91.3% (OR). In the gender comparison, male patients showed larger tooth size ratios, especially in the OR. Patients with Angle Class II/1 and II/2 had smaller tooth size ratios than patients with Angle Class III and I. Thus, patients with Angle Class II/1 had the largest tooth diameters in all maxillary teeth and with Angle Class II/2 the smallest tooth sizes in the mandible. The largest tooth widths in the lower jaw were observed in the Angle Class III patient group. Furthermore, a negative correlation from AR/OR to overjet, overbite, and available space in lower jaw as well as a positive correlation to available space in upper jaw was detected., Conclusions: There is a clear correlation between the tooth size ratios and the present dysgnathia as well as other orthodontically relevant occlusal traits. This prior knowledge about our patients is extremely important to create an individualized treatment plan and enable sufficient occlusion. To achieve a functionally good occlusion with correct overjet and overbite, it is essential that the maxillary and mandibular teeth are proportional in size. Any deviation from the ideal patient in terms of tooth size, number, shape, or arch must be considered in the pre-therapeutic treatment plan in combination with the existing dysgnathia in order to be able to achieve a stable anterior and posterior occlusion with appropriate adjustments to the therapy post-therapeutically., (© The Author(s) 2024. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

Objective: This study aimed to investigate the normal volumetric space and variations in the measurements of different landmarks in adults with different skeletal relations of the maxilla and the mandible based on CBCT data. The study also analyses these landmarks to locate any correlations., Background: Numerous studies in orthodontics have found a relationship between orthodontic treatment and changes in the anatomy and function of the airway. Severe changes in airway morphology can cause breathing difficulties, lower quality of life, and even result in life-threatening conditions such as obstructive sleep apnoea. Consequently, orthodontic diagnosis and treatment planning require a thorough understanding of the airway space and its function., Methods: The present retrospective study was conducted using CBCT records of 120 adult patients, containing 40 samples of each skeletal class (20 males and 20 females). The boundaries were defined for the 3 major regions: the nasopharynx, the oropharynx, and the hypopharynx. Various measurements were recorded across these regions, as well as selective cephalometric landmarks. The obtained data was used to calculate average and standard deviation, while regression analysis was used to evaluate correlations and t-test was used to test statistical significance of gender differences., Results: The results demonstrate that skeletal Class III individuals exhibit a reduced airway volume in the nasopharynx compared to other groups, whereas skeletal Class II individuals displayed a diminished airway volume in the hypopharynx. A strong correlation was observed for Sella turcica parameters. There were no significant differences in skeletal parameters across genders. Nasopharynx cavity volume demonstrated significant differences between skeletal Class I-Class III as well as between skeletal Class II-Class III. Hypopharynx cavity volume also demonstrated significant differences between skeletal Class I-Class II and between skeletal Class II-Class III., Conclusion: The major findings are the presence of a reduced nasopharyngeal volume in skeletal Class III malocclusions while skeletal Class II individuals displayed a diminished hypopharyngeal volume, making these critical areas to consider during the diagnostic and orthodontic treatment planning stages. This study also revealed a consistent correlation between Sella turcica parameters across various facial skeletal profiles, with skeletal Class II patients exhibiting a distinct pattern and skeletal Class I and Class III demonstrating an average relationship., (© 2024. The Author(s).)

Background: Facial divergence during growth and development affects both the anterior and posterior alveolar bone dimensions in the maxilla and mandible, and the dentoalveolar compensation mechanism in severe vertical skeletal discrepancies remains unclear., Aims: To evaluate the: (1) difference in dentoalveolar heights among subjects with different vertical facial patterns; (2) association between the dentoalveolar bone height and other cephalometric variables; (3) effect of sex on dentoalveolar height measurements., Material and Methods: Non-growing subjects with skeletal Class I (0°

Objective: The present study aimed to evaluate the mandibular bone structure of patients with different malocclusions by using fractal dimension (FD) analysis on dental panoramic radiographic images., Material and Methods: Pre-treatment panoramic radiographic images of 103 patients were included in the study and divided into 3 groups as Class I (group 1: 0

Objective: To three-dimensionally evaluate the position and morphology of the TMJ in skeletal Class I with variable degrees of overbite and overjet in comparison with normal peers., Methods: Pretreatment CBCT scans of 126 adults were retrieved. Based on the severity of overjet and overbite, the sample was divided into three main groups and six subgroups (18 patients each): the first group with a normal overbite and variable overjet degree and the second group with normal overjet and variable overbite degree. These six subgroups were compared with a third control group of normal overjet and overbite., Results: There were significant differences in vertical condylar position, vertical and anteroposterior condylar inclinations, condylar height, and significant posterior condylar positioning in severe deep overbite, compared with the control group., Conclusion: There were significant changes in the TMJ components in severe deep overbite cases. Therefore, sever deep overbite could be considered a predisposing factor for temporomandibular disorders.

Background: Many indices have been suggested to help orthodontists in predicting the ideal dental arch width. One of these was Pont's index which was established by Pont. He suggested equations to predict the ideal maxillary dental arch width (interpremolar and intermolar) from the combined mesiodistal width of the maxillary incisors. This study aimed to test the applicability of Pont's index as an orthodontic diagnostic tool in Egyptian population and to compare the results with those obtained from studies of different ethnic subjects., Methods: This study was performed using dental casts of 184 Egyptian individuals (82 males and 102 females; age range, 19-24 years). The casts were divided into 46 casts with normal occlusion, 46 casts with class I, 46 casts with class II and 46 casts with class III malocclusion, according to Angle's classification. Alginate impressions were taken for all patients and poured immediately using dental plaster. The real models were transformed into digital models using three-dimensional laser scanner to allow digital model analysis. Predicted arch widths were calculated using Pont's equations. The predicted values were compared to the measured values., Results: Intra class correlation coefficient (ICC) (absolute agreement) between measured and predicted arch widths was determined. Poor absolute agreement was found between measured arch width values and the corresponding values calculated according to Pont's index., Conclusion: According to the results of this study, Pont's index is not a reliable method for predicting the ideal dental arch widths in Egyptian populations., (© 2024. The Author(s).)

Background: The determining effect of facial hard tissues on soft tissue morphology in orthodontic patients has yet to be explained. The aim of this study was to clarify the hard-soft tissue relationships of the lower 1/3 of the face in skeletal Class II-hyperdivergent patients compared with those in Class I-normodivergent patients using network analysis., Methods: Fifty-two adult patients (42 females, 10 males; age, 26.58 ± 5.80 years) were divided into two groups: Group 1, 25 subjects, skeletal Class I normodivergent pattern with straight profile; Group 2, 27 subjects, skeletal Class II hyperdivergent pattern with convex profile. Pretreatment cone-beam computed tomography and three-dimensional facial scans were taken and superimposed, on which landmarks were identified manually, and their coordinate values were used for network analysis., Results: (1) In sagittal direction, Group 2 correlations were generally weaker than Group 1. In both the vertical and sagittal directions of Group 1, the most influential hard tissue landmarks to soft tissues were located between the level of cemento-enamel junction of upper teeth and root apex of lower teeth. In Group 2, the hard tissue landmarks with the greatest influence in vertical direction were distributed more forward and downward than in Group 1. (2) In Group 1, all the correlations for vertical-hard tissue to sagittal-soft tissue position and sagittal-hard tissue to vertical-soft tissue position were positive. However, Group 2 correlations between vertical-hard tissue and sagittal-soft tissue positions were mostly negative. Between sagittal-hard tissue and vertical-soft tissue positions, Group 2 correlations were negative for mandible, and were positive for maxilla and teeth., Conclusion: Compared with Class I normodivergent patients with straight profile, Class II hyperdivergent patients with convex profile had more variations in soft tissue morphology in sagittal direction. In vertical direction, the most relevant hard tissue landmarks on which soft tissue predictions should be based were distributed more forward and downward in Class II hyperdivergent patients with convex profile. Class II hyperdivergent pattern with convex profile was an imbalanced phenotype concerning sagittal and vertical positions of maxillofacial hard and soft tissues., (© 2024. The Author(s).)

Objective: To investigate the accuracy of artificial intelligence-assisted growth prediction using a convolutional neural network (CNN) algorithm and longitudinal lateral cephalograms (Lat-cephs)., Materials and Methods: A total of 198 Japanese preadolescent children, who had skeletal Class I malocclusion and whose Lat-cephs were available at age 8 years (T0) and 10 years (T1), were allocated into the training, validation, and test phases (n = 161, n = 17, n = 20). Orthodontists and the CNN model identified 28 hard-tissue landmarks (HTL) and 19 soft-tissue landmarks (STL). The mean prediction error values were defined as 'excellent,' 'very good,' 'good,' 'acceptable,' and 'unsatisfactory' (criteria: 0.5 mm, 1.0 mm, 1.5 mm, and 2.0 mm, respectively). The degree of accurate prediction percentage (APP) was defined as 'very high,' 'high,' 'medium,' and 'low' (criteria: 90%, 70%, and 50%, respectively) according to the percentage of subjects that showed the error range within 1.5 mm., Results: All HTLs showed acceptable-to-excellent mean PE values, while the STLs Pog', Gn', and Me' showed unsatisfactory values, and the rest showed good-to-acceptable values. Regarding the degree of APP, HTLs Ba, ramus posterior, Pm, Pog, B-point, Me, and mandibular first molar root apex exhibited low APPs. The STLs labrale superius, lower embrasure, lower lip, point of lower profile, B', Pog,' Gn' and Me' also exhibited low APPs. The remainder of HTLs and STLs showed medium-to-very high APPs., Conclusion: Despite the possibility of using the CNN model to predict growth, further studies are needed to improve the prediction accuracy in HTLs and STLs of the chin area., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Objective: The objective of the study was to elucidate the association between cranial base (Bjork-Jarabak analysis), midsagittal cross-sectional area of the airway in the pharyngeal region (MCSA-PR) data and pharyngeal-airway volume (PAV) and develop a model that could help clinicians predict PAV using two-dimensional (2D) data (Bjork polygon and MCSA-PR)., Materials and Methods: Pre-treatment lateral cephalometric radiographs and magnetic resonance imaging (MRI) scans of 82 women were categorized into three anteroposterior skeletal groups based on ANB angle: Class I (n = 29), 1.5° ≤ ANB≤5.1°; Class II (n = 26), ANB >5.1°; Class III (n = 27), ANB <1.5°. The Bjork polygon, MCSA-PR data from cephalograms and PAV data from MRI scans were examined. Intergroup comparisons were performed using the Kruskal-Wallis test and one-way analysis of variance (ANOVA), with pairwise comparisons conducted using the Bonferroni-corrected Mann-Whitney U-test for the Kruskal-Wallis test and Bonferroni-corrected multiple comparison test for one-way ANOVA. Forward multiple linear regression was used to create model equations for predicting PAV., Results: MCSA-PR and anterior (N-S) and posterior (S-Ar) cranial-base lengths were positively correlated with the PAV. We developed four models; three operated at the group level, and one encompassed the entire sample. Notably, all models could effectively explain the variance in the PAV data. The model for the Class I group was the strongest (adjusted R 2  = 0.77)., Conclusion: Our findings indicate the remarkable potential of the MCSA-PR, N-S and Bjork sum angles (BSA) as predictors of the PAV and the relevance of 2D cephalometric and cranial-base parameters in predicting the three-dimensional (3D) pharyngeal-airway size., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objectives: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT)., Design: Cross-sectional., Setting: Dentistry department of University., Subjects: Subjects comprised CBCT images of 150 adult patients, including 300 rami., Methods and Materials: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup., Results: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications., Conclusion: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objectives: The aim of our study is to compare the relationship between hand-wrist and cervical vertebra maturation stages with chronological age and to investigate the effect of malocclusion type on the relationship between these methods., Materials and Methods: Hand-wrist and cephalometric radiographs of 1000 patients (526 females, 474 males) with a mean age of 13.41 ± 1.83 were analyzed. The methods of Bacetti et al. were used for the cervical vertebra maturation stage, and Björk, Grave and Brown's methods were used for the hand-wrist maturation stage. One-way ANOVA test was applied to compare skeletal classes between them. Tukey post hoc test was used to determine the differences. The relationship between the malocclusion type, cervical vertebra and hand-wrist maturation stages was evaluated with the Spearman correlation test., Results: Spearman's correlation coefficient was 0.831, 0.831 and 0.760 in Class I, II and III females, respectively. In males, it was calculated as 0.844, 0.889 and 0.906, respectively. When sex and malocclusion were not differentiated, the correlation was found to be 0.887. All were statistically significant (P < 0.001). The highest correlation was observed in class III males, while the lowest was found in class III females., Conclusion: Cervical vertebrae can be used safely to assess pubertal spurt without hand-wrist radiography. Diagnosing growth and development stages from cephalometric images is important in reducing additional workload and preventing radiation risk., (© 2024. The Author(s).)

Background: There have been reports of unique dental morphological features amongst Latin American and Hispanic populations, and this might invalidate the use of current orthodontic diagnostic tools within this population. There are no tooth size/tooth ratio normative standards for the Hispanic population, despite overwhelming evidence about differences in tooth size between racial groups., Objective: This study aimed to determine whether there are significant differences in 3-D tooth shape between patients with Angle Class I, Class II, and Class III dental malocclusion in the Hispanic population., Methodology: Orthodontic study models representing Hispanic orthodontic patients with Angle Class I, II, and III dental malocclusions scanned using an intra-oral scanner. The scanned models were digitized and transferred to a geometric morphometric system. Tooth size shape were determined, quantified, and visualized using contemporary geometric morphometric computational tools using MorphoJ software. General Procrustes Analysis (GPA) and canonical variates analysis (CVA) used to delineate the features of shape that are unique to each group., Result: The study revealed differences in tooth shape between the different dental malocclusion groups on all twenty-eight teeth that were studied; the pattern of shape differences varied between the teeth and the dental malocclusions. The MANOVA test criteria, F approximations, and P-values show that shape in all the groups was significantly different < 0.05., Conclusion: This study revealed differences in tooth shape between the different dental malocclusions on all teeth, and the pattern of shape differences varied between the different dental malocclusions group., (© 2023. The Author(s).)

Introduction: The purposes of this retrospective study were to investigate the buccal and lingual alveolar bone thickness values of the posterior teeth in patients with asymmetrical skeletal Class III malocclusion and compare them with patients with symmetrical skeletal Class III and Class I malocclusion., Methods: Seventy-eight cone-beam computed tomography scans were classified into 3 groups according to the sagittal pattern and menton deviation: asymmetrical Class III (n = 26), symmetrical Class III (n = 26), and symmetrical Class I (n = 26). The buccal and lingual alveolar bone thickness of the first molar and premolars in the maxilla and mandible were measured at 3, 6, and 8 mm apical to the cementoenamel junction and the apical and middle levels of the root. Measurements were compared among the 3 groups., Results: In the asymmetrical Class III group, the buccal alveolar bone along the distobuccal root of the maxillary first molar on the deviated side was thinner by 1.07 to 1.10 mm than that in the symmetrical Class I group at 6-mm, 8-mm, and middle-level planes (P <0.001, P <0.01, and P <0.001). The buccal alveolar bone thickness along the distal and mesial roots of the mandibular first molar on the deviated side was thinner by 1.28 to 1.85 mm, and by 0.72 to 1.21 mm, respectively (P <0.001 and P <0.01), than that in the symmetrical Class I group at 6-mm, 8-mm, apical and middle-level planes., Conclusions: In this preliminary study, patients with skeletal Class III malocclusion showed thinner buccal and lingual alveolar bone in the posterior teeth than subjects with Class I malocclusion. Particular attention should be paid to buccal alveolar bone thickness along the distobuccal root of the maxillary and distal root of the mandibular first molar to prevent periodontal complications in decompensation. Future studies should involve larger sample sizes, more repeatable and comprehensive measuring and statistical methods., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: To emphasize the importance of diagnosis and discuss the therapeutic approaches that can be used in the orthodontic treatment of Class I malocclusion associated with two impacted maxillary canines. The opening of spaces for traction of these teeth by means of rapid maxillary expansion or extraction of maxillary premolars was contraindicated in the case reported. Therefore, it was decided to open spaces with projection of incisors., Results: The obtained results were satisfactory, as a good occlusion was obtained, with adequate functional guides, as well as an improvement in the facial appearance., Conclusion: The projection of the incisors prior to traction of the impacted maxillary canines proved to be a valid option in the case described. Ten years after completion of treatment, the case is stable, maintaining periodontal health.

Introduction: A side effect observed in cases treated with extractions is the instability of orthodontic space closure., Objective: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch., Methods: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening., Results: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure., Conclusions: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

Introduction: Computer-aided design and manufacturing (CAD-CAM) systems have assisted orthodontists to position brackets virtually. The purpose of this study was to evaluate if a CAD-CAM system could predict the orthodontic treatment outcome of patients with Angle Class I malocclusion with mild crowding or spacing and with no need for orthodontic extraction., Methods: Using the American Board of Orthodontics Cast-Radiograph Evaluation (ABO-CRE) and color map superimposition, the treated occlusion was compared with the virtual final occlusion of 24 young adults with Class I occlusion. Using eXceed software (eXceed, Witten, Germany), we created the final occlusion prediction for each patient (virtual set up group). A digital model of the final occlusion of each patient was created (treated occlusion group). ABO-CRE score was used to compare groups. In addition, a color map was created for all subjects to access the mean and range values between the virtual set up model and treated occlusion model of each patient. Random and systematic errors were calculated. In addition, chi-square and t test were used., Results: Comparisons between virtual set up occlusion and treated occlusion showed statistically significant differences in 3 out of 7 measurements: interproximal contact score was larger for treated than virtual occlusion (0.45 mm and 0.04 mm, respectively), and the treated occlusion showed larger values than the virtual occlusion for occlusal contacts (14.13 mm and 7.62 mm, respectively) and overjet (7.37 mm and 0.66 mm, respectively). Although the treated occlusion showed a larger score than the virtual occlusion (50.41 mm and 34.58 mm, respectively), there is no significant difference between both. Root angulation decreased (from 1.95 ± 1.29 to 0.65 ± 0.71) because of the treatment., Conclusions: ABO-CRE overall score presents no difference between groups. In addition, CAD-CAM setup occlusion closely predicts the final teeth alignment and leveling with interarch relationships showing less ABO-CRE score deduction., (Copyright © 2020 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: To compare the temporomandibular joint (TMJ) morphological characteristics in people with Class II versus Class I sagittal skeletal relationship and to identify other factors that influence the TMJ dimensions., Material and Methods: This cross-sectional and retrospective study evaluated 188 people divided into two groups, 92 cone-beam computed tomographies (CBCTs) and lateral radiographs (LR) of people with Skeletal class II relationship with Class II division 1 malocclusion versus 96 CBCTs and LR of people with Class I skeletal relationship and Class I malocclusion (controls). The CBCTs included people of both sexes, aged between 15 and 65 years old. The 3D Imaging Carestream Software was used to evaluate the condyle height and neck width, mediolateral and anteroposterior condyle dimensions, the shape of the glenoid fossa and condyle in the CBCTs. Likewise, the ANB angle, the Wits appraisal and other measurements were evaluated on LR. Besides, Mann-Whitney U, Chi 2 and multiple linear regression tests were performed. The significance level was set at P˂0.05., Results: The mediolateral and anteroposterior condyle dimensions were smaller in class II people (1.82mm and 0.29mm, respectively) than class I people (P<0.05). Likewise, height and neck width of condyle were smaller in class II people (0.73mm and 0.40mm, respectively) than class I people (P<0.05). Multiple linear regression identified mainly the ANB angle as a factor (P<0.05) that influenced the dimensions, decreasing the condyle dimensions in skeletal class II relationship., Conclusions: People with skeletal class II relationship showed smaller condyle dimension values than class I people. A decrease in the dimensions of the eminence and the condyle could be expected when the ANB angle increases., (Copyright © 2020 Elsevier Masson SAS. All rights reserved.)

Introduction: The collum angle that defines the crown root angulation of the single rooted teeth plays an important in treatment planning., Objective: To compare the collum angle (crown root angulation) of maxillary and mandibular anterior teeth in different skeletal malocclusions using Cone Beam Computed Tomography (CBCT)., Materials and Methods: Sixty subjects were categorized into four groups (fifteen subjects in each group) Class I, Class II division 1, Class II division 2 malocclusion and Class III based on Angle classification, Wits and ANB. The collum angle of maxillary and mandibular anterior teeth was measured using CBCT. One way ANOVA, Post hoc comparison with Tukey HSD and Paired t-test were used to analyse the measured data., Results: The collum angle of corresponding right and left side teeth were averaged. Thus, the mean and standard deviation of the collum angle (n-30) were generated for maxillary and mandibular central incisors, lateral incisors, and canines. A statistically significant increase was observed in the maxillary central incisors of Class II division 2 and mandibular lateral incisors of class III malocclusion. The collum angle was increased in mandibular canines of Class III malocclusion when compared with class I and Class II division 2 malocclusion. The collum angle was negative in mandibular central incisors of Class II division 2. No statistically significant difference was observed in the mean collum angle between the right and left side anterior teeth in all the four groups., Conclusion: A variation in Collum angle was observed between the maxillary and mandibular anterior teeth and malocclusions. The effect of these variations in collum angle in torque expression and biomechanics should be kept in mind by the orthodontist before treatment planning especially in Class II division 2 malocclusion., (Copyright © 2020 CEO. Published by Elsevier Masson SAS. All rights reserved.)

The aim of this study was to evaluate the differences in sella dimensions and shape between growing patients with Class I, Class II, and Class III skeletal malocclusions, evaluated through morphometric analysis. Seventy-eight subjects aged between 9 and 13 years were selected and assigned to either the Class I, Class II, or Class III groups according to the measured ANB angle (the angle between the Nasion, skeletal A-point and skeletal B-point). Six landmarks were digitised to outline the shape of the sella turcica. Linear measurements of the sella length and depth were also performed. Procrustes superimposition, principal component analysis, and canonical variate analysis were used to evaluate the differences in sella shape between the three groups. A one-way MANOVA and Tukey's or Games-Howell tests were used to evaluate the presence of differences in sella dimensions between the three groups, gender, and age. The canonical variate analysis revealed a statistically significant difference in sella shape between the Class I and the Class II groups, mostly explained by the CV1 axis and related to the posterior clinoidal process and the floor of the sella. No differences were found regarding linear measurements, except between subjects with different age. These differences in sella shape, that are present in the earlier developmental stages, could be used as a predictor of facial growth, but further studies are needed.

This case report shows the orthodontic treatment of four first premolar extractions of a 14-year-old teenager presenting a dental Class I malocclusion with a severe retrognathic mandible. It reflects conflicting views on objectives between the orthodontist who takes into account the facial balance and the patient who only desires a tooth alignment., (Copyright © 2019 CEO. Published by Elsevier Masson SAS. All rights reserved.)

Background: Corticotomy-assisted rapid orthodontics is a widely used method for speeding up conventional orthodontics. This study (i) evaluates the effects of corticotomy alone, corticotomy combined with bone graft, and corticotomy with platelet-rich fibrin (PRF) on vestibular alveolar bone thickness in patients with class I malocclusion; (ii) compares the treatment time with a conventional orthodontic therapy group, and (iii) investigates the periodontal health of patients who have undergone corticotomy-assisted rapid orthodontics., Methods: The patients were divided into 3 groups: Group 1 (n = 10) underwent corticotomy alone; Group 2 (n = 10) underwent corticotomy combined with bone graft, and Group 3 (n = 10) underwent corticotomy combined with PRF. In the following stage, vestibular alveolar bone thicknesses were evaluated using 3-dimensional cone-beam computed tomography images., Results: The findings showed that Group 2 achieved a more significant augmentation of the vestibular alveolar bone than Groups 1 and 3 (P = 0.001, P = 0.003), while corticotomy-assisted rapid orthodontics decreased treatment times. Sufficient alveolar bone thickness and preservation of the periodontal health were achieved when the corticotomy procedure was either combined with a bone graft or with PRF in the Class-I malocclusion patients., Conclusion: Bone grafts provided better bone thickness at the buccal surface of the anterior teeth of the mandible and maxilla, whereas the thickness of the keratinized gingiva was better with PRF.

Introduction: The mouth plays an important role in the overall aesthetic appearance of the face. The aims of this study were to determine the optimal antero-posterior (AP) lip position relative to various rotations of the nasal tip and assess the impact of the nasolabial angle on facial aesthetics., Material and Methods: Three-dimensional facial volumes, in motion, of one Caucasian male and one Caucasian female with a Class I malocclusion and an orthognathic profile were modified to alter the nasal tip rotation (3 rotations) and the AP lips position (6 positions). 72 generated models were created in two and three-dimensions. Generated models were rated online by 60 dentists, 60 orthodontists and 60 laypeople, using a Visual Analogue Scale. Scores were analysed according to lip position, rater's profession and gender., Results: General agreement was found between all groups on the most and least preferred lip positions. No differences between male and female raters were found. All raters were more influenced by the 3-dimensional rotating facial volume than by 2-dimensional angles. Similar angular values for the nasolabial angles were found in the most and least preferred profiles, showing that the most influential factor in facial aesthetics was the lip position, and stressing the need to evaluate each component of the nasolabial angle independently., Conclusion: The lip position was the determinant factor in facial aesthetics with little influence of the nose tip rotation. Three-dimensional evaluation of the nose and lip were needed to establish a soft tissue-based treatment plan., (Copyright © 2019 CEO. Published by Elsevier Masson SAS. All rights reserved.)

Scissor bite often remains unnoticed by patients although it can adversely affect facial symmetry, jaw growth, and mastication. This case report illustrates the efficacy of temporary skeletal anchorage devices (TSADs) and a modified lingual arch in correcting severe scissor bite. A 28-year-old woman presented with severe scissor bite in the mandibular right posterior segment. To treat this condition, TSADs were used for maxillary posterior intrusion and a modified lingual arch for buccally uprighting mandibular posterior teeth. Long-term retention records demonstrate stable treatment results., (Copyright © 2019 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

The purpose of this study was to locate the landmarks both in traditionally-used two-dimensional (2D) lateral cephalogram images and newly suggested landmarks in three-dimensional (3D) cone-beam computer tomography (CBCT) images to determine possible relationships between them and determine if they could be used to classify patients of malocclusion Class I., Material and Methods: CBCT images from 30 patients with malocclusion Class I were selected from the university of Alberta Graduate Orthodontic Program database. The images were then reconstructed using the AVIZO ® software platform to visualize and locate landmarks. There were a total of forty-two landmarks chosen for analysis, which included pre-existing landmarks used in 2D imaging as well as new landmarks suggested for 3D analysis. Descriptive statistics were also assessed using SPSS statistical package to determine any skeletal and dental relationships., Results: Descriptive statistics show that the linear and angular measurements used in 2D images did not correlate well with measurements in CBCT. The lowest standard deviation obtained was 0.04 for S-GoL/N-Me with a mean of 0.70mm. The highest standard deviation was 17.46 for FH-MPL with a mean of 41.53mm., Conclusion: The traditional landmarks used for 2D analysis of malocclusion did not show specific skeletal or dental patterns for analysing and classifying 3D images as malocclusion Class I., (Copyright © 2019 Elsevier Masson SAS. All rights reserved.)

Date of birth: 4/02/97; gender: female., Pre-Treatment Documents: 13.7 years old; 09/2010., Diagnosis: Angle's class: class II subdivision. Missing teeth before treatment: none., Treatment Planning: Extractions of four first premolars 14, 24, 34, 44. Class II molar and discrepancy correction. Intercuspidation, finishing. Bimaxillary multi-bracket. Beginning of treatment: 12 years old; 10/2010., Post-Treatment Documents: 15.6 years old; 8/2012. Treatment duration: 17 months. POST-RETENTION DOCUMENTS (MINIMUM 1 YEAR): 06/2016; 19.4 years old. Retention period: unlimited. Maxilla: bonded wire from 12 to 22, vacuum-formed retainer (night-only). Mandible: bonded wire from 33 to 43, vacuum-formed retainer (night-only)., (Copyright © 2019 CEO. Published by Elsevier Masson SAS. All rights reserved.)

Date of birth: 17/11/1998; gender: female. A., Pre-Treatment Documents: 11 years old; 02/2010., Diagnosis: Angle's class: class II division 2. Missing teeth before treatment: none., Treatment Planning: Without extractions. Alignment, levelling and arch coordination with intermaxillary class II alastics. Intercuspidation, finishing. Damon's bimaxillary multi-bracket. Beginning of treatment: 12 years old; 10/2010. B., Post-Treatment Documents: 14 years old; 11/2012. Treatment duration: 25 months. C. POST-RETENTION DOCUMENTS (MINIMUM 1 YEAR): 09/2016; 18 years old. Retention period: unlimited. Maxilla: vacuum-formed retainer (night-only). Mandible: bonded wire from 33 to 43., (Copyright © 2019. Published by Elsevier Masson SAS.)

Objectives: To clarify the associations among tongue volume, hyoid position, airway volume and maxillofacial form using cone beam computed tomography (CBCT) data for children with Class-I, Class-II and Class-III malocclusion., Setting and Sample Population: Sixty children (mean age, 9.2 years) divided into Class-I, Class-II and Class-III malocclusion groups according to the A-nasion-B angle., Material and Methods: Cone beam computed tomography was used for three-dimensional reconstruction of the maxillofacial region and airway. The hyoid position and the tongue, airway and oral cavity volumes were evaluated. Upper airway ventilation status was calculated using computational fluid dynamics. The groups were compared using analysis of variance and Kruskal-Wallis tests; relationships among the parameters were assessed using Pearson's and Spearman's rank correlation tests., Results: The tongue volume was larger in Class-III patients (50.63 cm 3 ) than in Class-I patients (44.24 cm 3 ; P < 0.05). The hyoid position was lower (49.44 cm), and anatomical balance (AB; tongue volume/oral cavity volume; 85.06%) was greater in Class-II patients than in Class-I patients (46.06 cm, 80.57%, respectively; P < 0.05 for both). The hyoid height showed a positive correlation with AB (r = 0.614; P < 0.001)., Conclusions: Children with Class-III malocclusion have large tongue volumes and small AB; the reverse is true for children with Class-II malocclusion. The hyoid position is closely associated with AB in children with malocclusion., (© 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objectives: This study was performed to compare the positions of the right and left condyles between male and female patients with different Angle malocclusions using cone-beam computed tomography (CBCT) panoramic reconstructions., Methods: The CBCT images of 60 patients (age of 18-37 years) were retrospectively evaluated. The patients were divided according to their Angle malocclusion classifications (Angle Classes I, II, and III). The condyle-to-eminence, condyle-to-fossa, and condyle-to-meatus distances were measured digitally using i-CAT software., Results: The left and right condyle-to-fossa distances were the most variable parameters among the Angle classes. The right condyle-to-eminence and right condyle-to-fossa distances were significantly different among the classes. Male patients seemed to have a greater condyle-to-fossa distance on the right side in both the Class I and III groups. The mean distance from the condyle to eminence, condyle to fossa, and condyle to meatus on the right side was the greatest in the Angle Class II group., Conclusions: In all three types of malocclusion (Angle Classes I, II, and III), the condyles on both the right and left sides were not exactly symmetric or centrally located within the glenoid fossa. This work emphasizes the differences in the condyle position between male and female patients. Furthermore, the symmetry and centricity of the condyles are not dependent on the patient's sex or type of malocclusion.

Introduction: Our objective was to analyze the characteristics that affect skeletal Class I adults with mandibular asymmetries using cone-beam computerized tomography., Methods: The sample included cone-beam computerized tomography images of 120 subjects. Asymmetry was determined by the deviation of gnathion from the midsagittal plane and classified as relative symmetry, moderate asymmetry, or severe asymmetry. Maxillary and mandibular measurements were made, and the differences between the contralateral side and the deviated side were evaluated, as well as the differences between the categories of asymmetry., Results: For patients with moderate asymmetry, there were significant differences between the contralateral and deviated sides for some measuments in the transverse and vertical planes. For those with severe asymmetry, statistically significant differences were found between the sides for all measurements, except for the measuments that evaluated the position of the mandibular condyle in the transverse and sagittal directions. Furthermore, a strong correlation was found in patients with severe asymmetry, between the deviation of the mandibular dental midline and the lateral displacement of gnathion., Conclusions: Patients with relative symmetry had a bilateral balance, whereas those with moderate and severe asymmetries showed several skeletal imbalances. A great deviation of the mandibular dental midline may indicate severe skeletal asymmetry in Class I adults., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Backgrounds: The occlusal registration of virtual models taken by intraoral scanners sometimes shows patterns which seem much different from the patients' occlusion. Therefore, this study aims to evaluate the accuracy of virtual occlusion by comparing virtual occlusal contact area with actual occlusal contact area using a plaster model in vitro., Methods: Plaster dental models, 24 sets of Class I models and 20 sets of Class II models, were divided into a Molar, Premolar, and Anterior group. The occlusal contact areas calculated by the Prescale method and the virtual occlusion by scanning method were compared, and the ratio of the molar and incisor area were compared in order to find any particular tendencies., Results: There was no significant difference between the Prescale results and the scanner results in both the molar and premolar groups (p = 0.083 and 0.053, respectively). On the other hand, there was a significant difference between the Prescale and the scanner results in the anterior group with the scanner results presenting overestimation of the occlusal contact points (p < 0.05). In Molars group, the regression analysis shows that the two variables express linear correlation and has a linear equation with a slope of 0.917. R 2 is 0.930. Groups of Premolars and Anteriors had a week linear relationship and greater dispersion., Conclusions: Difference between the actual and virtual occlusion revealed in the anterior portion, where overestimation was observed in the virtual model obtained from the scanning method. Nevertheless, molar and premolar areas showed relatively accurate occlusal contact area in the virtual model.

In his daily practice, the orthodontist is regularly asked to treat patients with one or more missing teeth. Considering their functional and esthetic specificities, and the relatively high frequency of agenesia, our interest was to focus on the permanent lateral upper incisors. Our study, based on an orthodontic population including 1000 patients, shows that about 7.8% of these patients present agenesis of at least one permanent tooth (out of which 3.6% are agenesis of the upper lateral incisor). Treatment options for these cases are multiple with several decisional factors to consider: the solutions often lead to compromises, and require a multidisciplinary coordination. Therefore, the purpose of this article, was to describe the prevalence of these agenesia based on a retrospective study, and to present two clinical cases: the first case is a bilateral agenesis of the maxillary lateral incisors treated with space opening in order to place two implant-supported restorations. The second case is an agenesis of tooth 12 treated with space reopening and the placement of a cantilever bridge. These clinical cases are presented to illustrate the multidisciplinary approach involving orthodontics, prosthodontics, and periodontology, in order to achieve the most esthetic and functional results possible., (Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.)

Aim: The aim of the study was to assess the reliability and validity of cephalometric variables from MicroScribe-3DXL., Materials and Methods: Seven cephalometric variables (facial angle, ANB, maxillary depth, U1/FH, FMA, IMPA, FMIA) were measured by a dentist in 60 Malay subjects (30 males and 30 females) with class I occlusion and balanced face. Two standard images were taken for each subject with conventional cephalometric radiography and MicroScribe-3DXL. All the images were traced and analysed. SPSS version 2.0 was used for statistical analysis with P-value was set at P<0.05., Results: The results revealed a significant statistic difference in four measurements (U1/FH, FMA, IMPA, FMIA) with P-value range (0.00 to 0.03). The difference in the measurements was considered clinically acceptable. The overall reliability of MicroScribe-3DXL was 92.7% and its validity was 91.8%., Conclusion: The MicroScribe-3DXL is reliable and valid to most of the cephalometric variables with the advantages of saving time and cost. This is a promising device to assist in diverse areas in dental practice and research., (Copyright © 2018. Published by Elsevier Masson SAS.)

Introduction: The purpose of this study was to investigate maxillomandibular transverse widths and molar inclinations of adults with hypodivergent, normodivergent, and hyperdivergent facial patterns using cone-beam computed tomography., Methods: We evaluated Class I subjects (55 men, 66 women) who were divided into hypodivergent (<27°), normodivergent (28°-37°), and hyperdivergent (>38°) groups by their mandibular plane angles. Frontal and coronal views of the images were analyzed. Sex differences, vertical facial pattern differences, and related factors were assessed with independent 2-sample t tests, 1-way analysis of variance followed by post hoc Tukey tests, and Pearson correlation analysis., Results: The hypodivergent group had greater maxillary alveolar widths 7 mm apically from the alveolar crest. The intermolar widths and molar inclinations showed no significant differences among the groups. As the mandibular plane angles increased, interjugular widths, transverse mandibular widths, and buccolingual maxillary alveolar widths at the midroot level decreased, whereas the maxillomandibular width differences and palatal heights increased im both sexes., Conclusions: An increase in the mandibular plane angle is associated with tendencies of narrow mandibular arches, thinner maxillary alveolar bones at the midroot level, and higher palatal arches in both sexes. Intermolar widths and molar inclinations were not significantly affected by vertical facial patterns., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: Purpose of the present study was to compare external root resorption (ERR) volumetrically in maxillary incisors induced by orthodontic treatment using self-ligating brackets (Damon Q, DQ) or conventional brackets (Titanium Orthos, TO) with the help of cone-beam computed tomography (CBCT)., Patients and Methods: A sample of 32 subjects, with Angle Class I malocclusion and anterior crowding of 4-10 mm, was divided randomly into two groups: a DQ group, in which self-ligating DQ brackets with Damon archwires were used; and a TO group, in which conventional TO brackets with large Orthos archwires were applied. The study was conducted using CBCT scans taken before (T1), and near the end (9 months after the initiation of treatment; T2) of the orthodontic treatment. The extent of ERR was determined volumetrically using Mimics software. Changes in root volume were evaluated by repeated-measures analysis of variance as well as by paired and independent t-tests., Results: While significant differences were found between T1 and T2 for root volume in both groups (p < 0.05), there was no difference between the groups regarding the amount (mm 3 or relative change) of ERR (p > 0.05). Maxillary central and lateral incisors showed similar volume loss (p > 0.05). Furthermore, the TO group showed a higher prevalence of palatinal and proximal slanted RR compared with the DQ group (p < 0.05)., Conclusions: It is not possible to suggest superiority of one bracket system over the other only considering root resorption pattern or amount. Higher incidence of slanted RR found in patients treated with the TO system warrants further research to identify possible specific causes.

Aim: The aim of this study is (1) to inspect any difference in mandibular arch widths between males and females in class I and class II division 1 (class malocclusions using cone-beam computed tomography (CBCT), (2) to compare the mandibular dental and basal widths between the two groups, and (3) to investigate any possible correlation between dental and basal arch widths in both groups. Materials and methods: The CBCT images of 68 patients aged between 18 and 25 years consisted of 34 class I (17 males and 17 females) and 34 class (17 males and 17 females) who were recruited at the Department of Orthodontics, University of Damascus Dental School (Syria). Using on-demand three-dimensional (3D) on axial views, facial axis points for dental measurements and basal bone center (BBC) points for basal measurements were identified on lower canines and first molars. Dental and basal intercanine width (ICW) and intermolar width (IMW) were measured. Results: Independent t-test showed a statistically significant difference between males and females in several variables in both groups and a statistically significant difference between class I and class groups in the basal ICW for both genders and in the dental ICW for females only (p < 0.05). In class I group, Pearson's correlation coefficients between dental and basal measurements showed a strong correlation in the IMW for both genders (r > 0.73; p < 0.01) and a moderate correlation in females' ICW (r = 0.67; p < 0.01). In the class group, a moderate correlation in females' IMW (r = 0.67; p < 0.01) was found. Conclusion: Females compared with males had narrower dimensions. Class I patients had larger ICW than class II-1 patients in all measurements and had narrower IMW than class in most measurements for both genders. There were moderate-to-strong correlations between dental and basal dimensions. BBC points might be landmarks that accurately represent the basal bone arch. Clinical significance: CBCT-based assessments of dental and basal arch dimensions provide a great opportunity to accurately evaluate these aspects, to enhance clinicians' decisions regarding proper tooth movements, and to achieve good dentoalveolar intra-arch harmony. Keywords: Basal arch, Class I, Class Cone-beam computed tomography, Dental arch, Intercanine width, Intermolar width.

This article reports the case of a 24-year-old man with a large anterior open bite, mild mandibular crowding, increased overjet, no passive lip sealing, and Angle Class I malocclusion. The treatment results were achieved by mandibular molar intrusion using 1.8 × 8.5-mm mini-implants (C-implants) inserted between the mandibular first and second molars bilaterally. A 2.5-mm molar intrusion and open-bite closure occurred within 8 months. The multiloop edgewise archwire technique helped to intrude the posterior teeth. Total treatment time was 20 months. Fifty months postretention records are also presented. The patient achieved a suitable occlusion and satisfactory facial esthetics at the end of treatment and at the 50-month retention check., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Patients with bimaxillary protrusion may have an unattractive profile with a retruded chin contour. Correction of the severely protrusive anterior alveolar bone and teeth combined with a moderate open bite without orthognathic surgery can be challenging. This case report describes the orthodontic treatment of a woman with severe bimaxillary protrusion and a moderate open bite. Excellent chin morphology and facial appearance were obtained with the extraction of 4 first premolars and 4 third molars, and total distalization of both arches with 4 mini-implants, one in each quadrant between the second premolar and the first molar. The total treatment time was 30 months., (Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: To investigate the retromolar space available for molar distalization in patients with mandibular prognathism., Materials and Methods: Using cone-beam computed tomography, the posterior mandibular dimensions in 110 consecutive patients with Class I or Class III malocclusion were measured (mean age, 27.0 ± 7.1 years). The shortest linear distances from the distal root of the right mandibular second molar to the inner border of the mandibular cortex were measured at the level of root furcation and 2, 4, and 6 mm apical to the furcation along the sagittal line and the posterior line of occlusion. The retromolar distances were compared between the Class I and Class III malocclusion groups using general linear mixed models., Results: The retromolar space measured through the sagittal line showed no significant intergroup difference. Among the distances measured through the posterior line of occlusion, the space measured at depths 0 and 2 mm to the furcation were significantly greater in the Class III group than in the Class I group., Conclusions: Patients with Class III malocclusion have greater retromolar space for mandibular molar distalization along the posterior line of occlusion only at the level of the second molar furcation.

Treatment of multiple impacted teeth is challenging. Three-dimensional treatment planning can help in delivering a better outcome. This case report presents a patient with an incomplete dental transposition between the canine and lateral incisor of the maxillary right side associated with the impaction of a dilacerated right central incisor. Using a two-stage surgical exposure and augmented corticotomy, the patient's occlusion and smile esthetics were significantly improved, and Class I occlusal relationships with optimal overjet and overbite were achieved after 50 months of orthodontic treatment. Thirty-month posttreatment records revealed a stable result.

Background: In the long-lasting debate of extraction versus non-extraction treatment, the impact of extractions on the skeletal vertical dimension remains rather unclear. The aim of this retrospective research study was to obtain a bias-free sample of morphologically similar borderline patients treated with or without extraction of the four first premolars and to retrospectively evaluate the vertical changes that occurred., Methods: A borderline sample of 83 patients, 41 treated with four first premolar extractions and 42 treated without, was obtained by means of discriminant analysis applied to a previously investigated parent sample of 542 class I patients. The pretreatment and posttreatment cephalometric radiographs were analyzed digitally, and seven measurements were assessed for vertical skeletal changes. Also, average tracings between the two treatment groups were evaluated using the Procrustes superimposition method., Results: The variables of SN to Go-Gn and Y-axis showed adjusted intergroup differences of - 0.91° and - 1.11° (P = 0.04). Comparing the mean intra-group differences of all the variables simultaneously, a significant difference was found between the two treatment groups (overall P value = 0.04). In the extraction group, only the gonial angle showed a significant decrease (P = 0.01) while the overall P value evaluating the intra-group differences between pre- and posttreatment was significant (overall P value < 0.01). In the non-extraction group, the variable of N-ANS/N-Me showed a significant decrease (P = 0.02) and the overall P value evaluating the intra-group differences between pre- and posttreatment was also significant (overall P value < 0.01). Differences in treatment duration were assessed using a log-normal model and showed that extraction treatment lasted significantly longer than non-extraction treatment (P < 0.01)., Conclusions: The borderline group of patients identified by the discriminant analysis exhibited similar morphological characteristics at treatment's onset; therefore, the posttreatment changes could safely be attributed to the choice of extraction or non-extraction treatment and not to pre-existing differences. Treatment choice had an impact on the patients' vertical skeletal dimensions. Patients treated with four first premolar extractions showed a slight decrease in the vertical skeletal measurements, whereas non-extraction patient treatment showed a slight increase. The treatment time was also significantly higher in the extraction group.

Objective: The aim of this study was to compare upper airway widths among skeletal Class I malocclusion subjects with different vertical facial patterns., Methods: The sample included a total of 99 lateral cephalograms of post pubertal individuals (18.19 ± 1.76 years old). The vertical facial pattern was determined by the Vert index. The McNamara method was used to quantify upper airway widths. ANOVA test and Student's t test for independent groups were used, when normal distribution was not supported Kruskal-Wallis test and U-Mann-Whitney test were used. A multiple linear regression analysis was also performed., Results: Statistically significant differences in several nasopharyngeal widths were found among the distinct vertical facial patterns. Subjects with brachyfacial pattern presented larger nasopharyngeal widths than subjects with mesofacial (p= 0.030) or dolichofacial (p= 0.034) patterns. The larger the Vert value, the larger the nasopharyngeal widths (R2= 26.2%, p< 0.001). At the level of oropharynx no statistically significant differences were found., Conclusion: It was concluded that nasopharyngeal linear anteroposterior widths in Class I malocclusion brachyfacial are larger than in mesofacial and dolichofacial individuals. The Vert index only explained 25% of the total variability. No correlation was found for the oropharyngeal widths.

Introduction: Patients with cleft lip and palate (CLP) suffer from several esthetic and functional challenges. Comprehensive treatment of these patients involves orthognathic surgery that may lead to velopharyngeal insufficiency or reduction in lower airway. Several cases of airway insufficiency, velopharyngeal incompetence, snoring, hypopnea, and obstructive sleep apnea have been reported in subjects with CLP. The aim of this study was to compare the anteroposterior dimensions of the oropharyngeal airway at 5 levels, the height of the oropharyngeal column, and the volume of the oropharyngeal airway in subjects with and without CLP., Methods: The sample consisted of 62 patients with CLP and 42 subjects with Angle Class I malocclusion. Anteroposterior dimension, height, and volume of the oropharyngeal airway were measured using the midsagittal and axial slices obtained from 3-dimensional digital volume tomographic scans for both groups., Results: The anteroposterior dimensions of the airway were significantly reduced in the study subjects compared with the control group at the level of the postnasal spine, the base of the tongue, and the epiglottis. The airway dimensions measured on the axial sections at the level of the palatal and epiglottic plane were also significantly lower in the study group. The height and volume of the oropharyngeal airway were also significantly smaller in patients with CLP compared with subjects without CLP., Conclusions: Patients with CLP showed reduced dimensions and volumes of the oropharyngeal airway in all 3 planes compared with the control group., (Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Aim: To prospectively evaluate soft and hard tissue responses to orthodontic treatment of bimaxillary protrusion (BMP) in Dravidian population using McLaughlin, Bennett, and Trevisi (MBT) mechanics of the preadjusted edgewise appliance., Methods: Thirty-one adult (18-30 years) Class I BMP patients were treated using the above mechanics after extraction of four first premolars. Forty-five pre- and post-treatment variables on lateral cephalograms were compared using paired t-test and Pearson's correlation coefficient., Results: All linear and angular parameters pertaining to hard and soft tissues showed significant changes, indicating retraction of incisors, upper and lower lips; increase in nasolabial angle; and decrease in circumoral convexity, interlabial gap, and lip thickness. Various correlations established were (1) upper lip to upper incisor retraction 1:2.01, (2) lower lip to upper incisor retraction 1:1.5, (3) lower lip to lower incisor retraction 1:1, and (4) upper incisor retraction to nasolabial angle 1:2.02., Conclusions: Orthodontic therapy using MBT mechanics is very useful in achieving favorable hard and soft tissue changes, following four first premolar extractions in BMP. The various correlations established between incisor retraction and soft tissue parameters could prove useful to the discerning clinician.

Objective: To evaluate the pharyngeal airway space changes in complete unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP) individuals, and compare with age and sex-matched noncleft (NC) control subjects., Design: Retrospective study., Setting: Cleft and Craniofacial Centre, KK Women's and Children's Hospital, Singapore., Materials and Methods: Twenty UCLP (mean age: 13.4 ± 0.5 years), 18 BCLP (mean age: 13.5 ± 0.5 years) and 20 skeletal Class I subjects (mean age: 13.4 ± 0.6 years) were included in the study. Cone beam computed tomography scans were assessed for pharyngeal airway space (PAS) (oropharyngeal, nasopharyngeal, total airway space volume), and compared with PAS of age and sex-matched skeletal Class I NC individuals., Results: Pharyngeal airway space showed statistically significant differences in the UCLP, BCLP, and NC control subjects. Oropharyngeal (9338 ± 1108 mm 3 , P < .05), nasopharyngeal (2911 ± 401 mm 3 , P < .05), and total airway space (12 250 ± 1185 mm 3 , P < .05) volumes of BCLP individuals showed significant reduction in comparison to UCLP and NC. There were no gender differences of PAS in any of the groups tested (P > .05)., Conclusion: The pharyngeal airway space was significantly reduced in the BCLP group than were those in UCLP and control groups. This reduced PAS should be taken into account when planning treatment for these individuals.

Introduction: The Frankfort horizontal (FH) is a plane that intersects both porions and the left orbitale. However, other combinations of points have also been used to define this plane in 3-dimensional cephalometry. These variations are based on the hypothesis that they do not affect the cephalometric analysis. We investigated the validity of this hypothesis., Methods: The material included cone-beam computed tomography data sets of 82 adult subjects with Class I molar relationship. A third-party method of cone-beam computed tomography-based 3-dimensional cephalometry was performed using 7 setups of the FH plane. Six lateral cephalometric hard tissue measurements relative to the FH plane were carried out for each setup. Measurement differences were calculated for each pair of setups of the FH plane. The number of occurrences of differences greater than the limits of agreement was counted for each of the 6 measurements., Results: Only 3 of 21 pairs of setups had no occurrences for the 6 measurements. No measurement had no occurrences for the 21 pairs of setups. Setups based on left or right porion and both orbitales had the greatest number of occurrences for the 6 measurements., Conclusions: This investigation showed that significant and undesirable measurement differences can be produced by varying the definition of the FH plane., (Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)