Search

Chromia (Cr2O3) is a magnetoelectric oxide which permits voltage-control of the antiferromagnetic (AFM) order, but it suffers technological constraints due to its low Neel Temperature (TN ~307 K) and the need of a symmetry breaking applied magnetic field to achieve reversal of the Neel vector. Recently, boron (B) doping of Cr2O3 films led to an increase TN > 400 K and allowed the realization of voltage magnetic-field free controlled N\'eel vector rotation. Here, we directly image the impact of B doping on the formation of AFM domains in Cr2O3 thin films and elucidate the mechanism of voltage-controlled manipulation of the spin structure using nitrogen vacancy (NV) scanning probe magnetometry. We find a stark reduction and thickness dependence of domain size in B-doped Cr2O3 (B:Cr2O3) films, explained by the increased germ density, likely associated with the B doping. By reconstructing the surface magnetization from the NV stray-field maps, we find a qualitative distinction between the undoped and B-doped Cr2O3 films, manifested by the histogram distribution of the AFM ordering, i.e., 180 degree domains for pure films, and 90 degree domains for B:Cr2O3 films. Additionally, NV imaging of voltage-controlled B-doped Cr2O3 devices corroborate the 90 degeree rotation of the AFM domains observed in magnetotransport measurement.

Boron (B) alloying transforms the magnetoelectric antiferromagnet Cr2O3 into a multifunctional single-phase material which enables electric field driven {\pi}/2 rotation of the N\'eel vector. Nonvolatile, voltage-controlled N\'eel vector rotation is a much-desired material property in the context of antiferromagnetic spintronics enabling ultra-low power, ultra-fast, nonvolatile memory, and logic device applications. N\'eel vector rotation is detected with the help of heavy metal (Pt) Hall-bars in proximity of pulsed laser deposited B:Cr2O3 films. To facilitate operation of B:Cr2O3-based devices in CMOS environments, the N\'eel temperature, TN, of the functional film must be tunable to values significantly above room temperature. Cold neutron depth profiling and x-ray photoemission spectroscopy depth profiling reveal thermally activated B-accumulation at the B:Cr2O3/ vacuum interface in thin films deposited on Al2O3 substrates. We attribute the B-enrichment to surface segregation. Magnetotransport data confirm B-accumulation at the interface within a layer of about 50 nm thick where the device properties reside. Here TN enhances from 334 K prior to annealing, to 477 K after annealing for several hours. Scaling analysis determines TN as a function of the annealing temperature. Stability of post-annealing device properties is evident from reproducible N\'eel vector rotation at 370 K performed over the course of weeks.

Powder samples have been suggested as a pathway to fabricate isotropic magnetoelectric (ME) materials which effectively only have a pseudoscalar or monopole ME response. We demonstrate that random distribution of ME grains alone does not warrant isotropic ME response because the activation of a non-vanishing ME response requires a ME field cooling protocol which tends to induce preferred axes. We investigate the evolution of ME susceptibility in powder chromia samples for various ME field cooling protocols both theoretically and experimentally. In particular, we work out the theoretical expressions for ME susceptibility for powder Chromia in the framework of statistical mechanics where Boltzmann factors weigh the orientation of the N\'eel vector relative to the local orientation of the c-axis of a grain. Previous approximations oversimplified the thermodynamic nature of the annealing process giving rise to misleading conclusions on the role of the magnitude of the applied product of electric and magnetic fields on the ME response. In accordance with our refined theory, a strong dependence of the functional form of $\alpha$ vs. $T$ of Chromia powders on the ME field cooling protocol is observed. It shows that Chromia powder is not generically an isotropic ME effective medium but provides a pathway to realize the elusive isotropic ME response., Comment: Submitted to Physical Review B

We report direct imaging of boundary magnetization associated with antiferromagnetic domains in magnetoelectric epitaxial Cr2O3 thin films using diamond nitrogen vacancy microscopy. We found a correlation between magnetic domain size and structural grain size which we associate with the domain formation process. We performed field cooling, i.e., cooling from above to below the N\'eel temperature in the presence of magnetic field, which resulted in the selection of one of the two otherwise degenerate 180 degree domains. Lifting of such a degeneracy is achievable with a magnetic field alone due to the Zeeman energy of a weak parasitic magnetic moment in Cr2O3 films that originates from defects and the imbalance of the boundary magnetization of opposing interfaces. This boundary magnetization couples to the antiferromagnetic order parameter enabling selection of its orientation. Nanostructuring the Cr2O3 film with mesa structures revealed reversible edge magnetic states with the direction of magnetic field during field cooling.

The near-field Coulomb interaction between a nano-emitter and a graphene monolayer results in strong F\"orster-type resonant energy transfer and subsequent fluorescence quenching. Here, we investigate the distance dependence of the energy transfer rate from individual, i) zero-dimensional CdSe/CdS nanocrystals and ii) two-dimensional CdSe/CdS/ZnS nanoplatelets to a graphene monolayer. For increasing distances $d$, the energy transfer rate from individual nanocrystals to graphene decays as $1/d^4$. In contrast, the distance dependence of the energy transfer rate from a two-dimensional nanoplatelet to graphene deviates from a simple power law, but is well described by a theoretical model, which considers a thermal distribution of free excitons in a two-dimensional quantum well. Our results show that accurate distance measurements can be performed at the single particle level using graphene-based molecular rulers and that energy transfer allows probing dimensionality effects at the nanoscale., Comment: Main text (+ 5 figures) and Supporting Information (+ 7 figures)

We show how the weak field magneto-conductance can be used as a tool to characterize epitaxial graphene samples grown from the C or the Si face of Silicon Carbide, with mobilities ranging from 120 to 12000 cm^2/(V.s). Depending on the growth conditions, we observe anti-localization and/or localization which can be understood in term of weak-localization related to quantum interferences. The inferred characteristic diffusion lengths are in agreement with the scanning tunneling microscopy and the theoretical model which describe the "pure" mono-layer and bilayer of graphene [MacCann et al,. Phys. Rev. Lett. 97, 146805 (2006)].

This review on graphene, a one atom thick, two-dimensional sheet of carbon atoms, starts with a general description of the graphene electronic structure as well as a basic experimental toolkit for identifying and handling this material. Owing to the versatility of graphene properties and projected applications, several production techniques are summarized, ranging from the mechanical exfoliation of high quality graphene to the direct growth on carbides or metal substrates and from the chemical routes using graphene oxide to the newly developed approach at the molecular level. The most promising and appealing properties of graphene are summarized from an exponentially growing literature, with a particular attention to matching production methods to characteristics and to applications. In particular, we report on the high carrier mobility value in suspended and annealed samples for electronic devices, on the thickness-dependent optical transparency and, in the mechanical section, on the high robustness and full integration of graphene in sensing device applications. Finally, we emphasize on the high potential of graphene not only as a post-silicon materials for CMOS device application but more ambitiously as a platform for post-CMOS molecular architecture in electronic information processing., Comment: Review article: 21 pages, 243 references, 10 figures. Accepted for publication in Carbon, 2010

In this Letter, we present the patterning, exfoliation and micromanipulation of thin graphitic discs which are subsequently connected and patterned into sub-100nm wide ribbons with a resist-free process using Focused Ion Beam (FIB) lithography and deposition. The electronic transport properties of the double side-gated nanoribbons are then investigated down to 40 K and interpreted with a simple model of 1D array of tunnelling junctions., Comment: Revised version: more detailed description of control experiments. 5 pages, 4 figures, submitted to Small (Wiley-VCH). Added supporting information (Figs S1 to S8)