Search

Catalysis and translocation of multisubunit DNA-directed RNA polymerases underlie all cellular mRNA synthesis. RNA polymerase II (Pol II) synthesizes eukaryotic pre-mRNAs from a DNA template strand buried in its active site. Structural details of catalysis at near-atomic resolution and precise arrangement of key active site components have been elusive. Here, we present the free-electron laser (FEL) structures of a matched ATP-bound Pol II and the hyperactive Rpb1 T834P bridge helix (BH) mutant at the highest resolution to date. The radiation-damage-free FEL structures reveal the full active site interaction network, including the trigger loop (TL) in the closed conformation, bonafide occupancy of both site A and B Mg2+, and, more importantly, a putative third (site C) Mg2+ analogous to that described for some DNA polymerases but not observed previously for cellular RNA polymerases. Molecular dynamics (MD) simulations of the structures indicate that the third Mg2+ is coordinated and stabilized at its observed position. TL residues provide half of the substrate binding pocket while multiple TL/BH interactions induce conformational changes that could allow translocation upon substrate hydrolysis. Consistent with TL/BH communication, a FEL structure and MD simulations of the T834P mutant reveal rearrangement of some active site interactions supporting potential plasticity in active site function and long-distance effects on both the width of the central channel and TL conformation, likely underlying its increased elongation rate at the expense of fidelity. [ABSTRACT FROM AUTHOR]

This study evaluated the effects of post-calcination on the charge properties and active sites of Mg/Al layered double hydroxide-decorated spent coffee ground biochars (LDH MgAl @SCGB) governing adsorption behaviors and mechanisms of arsenic (As V ) and antimony (Sb V ) anions from aqueous phases. Post-calcinated LDH MgAl @SCGB (PLDH MgAl @SCGB) exhibited higher adsorption capacities for As V and Sb V compared to spent coffee ground biochars (SCGB) and LDH MgAl @SCGB as post-calcination of LDH MgAl @SCGB enhanced the charge properties (surface zeta potential at pH 7.0: SCGB = -21.8 mV, LDH MgAl @SCGB = 28.5 mV, and PLDH MgAl @SCGB = 34.4 mV) and increased active sites by eliminating the anions (i.e., Cl - ions) and water molecules at its interlayers. The calculated kinetic, intra-particle diffusion, and isotherm parameters indicated that the chemisorption and intra-particle diffusion were mainly responsible for the adsorption of As V and Sb V by SCGB, LDH MgAl @SCGB, and PLDH MgAl @SCGB. Moreover, post-calcination of LDH MgAl @SCGB enhanced its selectivity toward As V and Sb V by reinforcing the electrostatic surface complexation via its improvement of charge properties. Since PLDH MgAl @SCGB exhibited the excellent reusability for the adsorption of As V (reuse efficiency >63.6%) and Sb V (reuse efficiency >52.1%), it can be concluded that post-calcination of LDH MgAl @SCGB is a promising method for improving the adsorption capacities for As V and Sb V in real water matrices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Coronary artery disease (CAD) is characterized by narrowing and subsequent blockade of coronary arteries, and imposes a significant health and economic burden. Stent and scaffold devices are introduced in advanced CAD to improve vascular stability and restore blood flow. Although in vitro flow systems like the Chandler loop have been developed to enhance the understanding of interactions between device materials, their coatings, and vascular cells, imaging-based in vitro analysis of device performance is limited. In this study, we established a novel stent flow chamber system designed to assess the thrombogenicity of bioresorbable magnesium scaffold (RMS) and stent materials in vitro. Additionally, we compared the thrombogenicity - an important clinical parameter in stent performance - of the Magmaris-316 L stainless steel stent with its predecessors, Magmaris RMS and a prototype of the third-generation RMS (DREAMS 3G). Analysis of platelet adhesion and coverage of the different devices under flow conditions demonstrated that the Magmaris RMS exhibits reduced thrombogenicity compared to the Magmaris-316 L stainless steel stent. Moreover, thrombogenicity of the DREAMS 3G prototype, composed of BIOmag material, is further decreased compared to its predecessors. The observed reduction in thrombogenicity of the DREAMS 3G prototype in vitro suggests additional improvements in clinical safety and efficacy, highlighting its promise for treating CAD. Future research on this prototype may thus open avenues for analyzing other blood components and patient-derived endothelial cells. In line with the 3R principles, this approach may also help reduce the need for animal testing., (© 2024. The Author(s).)

Obg, a GTPase, binds to the premature 50S ribosomal subunit and facilitates recruitment of rproteins and rRNA processing to form the mature 50S subunit. This binding depends on nucleotide-induced conformational changes (GDP/GTP). However, the mechanism by which Obg undergoes conformational changes to associate with the premature 50S subunit is unknown. Therefore, 1000 ns molecular dynamics simulations were conducted to investigate this mechanism. Visualization of the simulated trajectory showed that in GDP and GTP-bound states, the C-domain moved towards the SwI region, while in GTP-Mg 2+ and ppGpp-bound states, the C-domain shifted towards the N-tails. Further, positioning these conformations of Obg on the 50S subunit suggests possible mechanisms by which the GTP-Mg 2+ bound state is responsible for recruiting rprotein, as well as the impact of the absence of Mg 2+ in the GTP-bound state. Furthermore, the study provides insights into the conformational changes that may lead to the dissociation of the GDP-bound state from the 50S subunit and explores the potential role of the ppGpp-bound state in inhibiting 70S ribosome formation. Additionally, RMSF and community network analyses reveal how internal dynamics and intricate connections within Obg affect C-domain motion., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Although significant progress in developing biodegradable magnesium alloy materials in cardiovascular stents has been achieved recently, they still face challenges such as rapid in vivo corrosion degradation, inferior blood compatibility, and limited re-endothelialization after the implantation. Hydrogel coating that can catalyze the liberation of gas signal molecules offers a good solution to alleviate the corrosion rate and enhance the biocompatibility of magnesium and its alloys. In this study, based on alkaline heat treatment and construction of polydopamine coating on the surface of magnesium alloy, sodium alginate/carboxymethyl chitosan (SA/CMCS) gel was simultaneously covalently grafted onto the surface to build a natural polymer hydrogel coating, and selenocystamine (SeCA) and CO release molecules (CORM-401) were respectively immobilized on the surface of the hydrogel coating to ameliorate the anticoagulant performance and accelerate endothelial cells (ECs) growth by catalyzing the release of endogenous gas signal molecules (NO or CO). The findings verified that the as-prepared hydrogel coating can catalyze the liberation of CO or NO and significantly improve the corrosion resistance of magnesium alloy. At the same time, owing to the excellent hydrophilicity of the hydrogel coating, the good anticoagulant property of sodium alginate, and the ability of CMCS to promote the ECs growth, the modified magnesium alloy could significantly improve the albumin adsorption while preventing the adsorption of fibrinogen, hence significantly augmenting the anticoagulant properties and promoting the ECs growth. Under the catalytic release of NO or CO, the released gas molecules further enhanced hemocompatibility and promoted endothelial cell (EC) growth and the expression of vascular endothelial growth factor (VEGF) and NO of ECs. Therefore, the bioactive coatings that can catalyze the release of NO or CO have potential applications in constructing surface bioactive coatings for magnesium alloy materials used for intravascular stents., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The rate of photosynthesis and, thus, CO 2 fixation, is limited by the rate of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco). Not only does Rubisco have a relatively low catalytic rate, but it also is promiscuous regarding the metal identity in the active site of the large subunit. In Nature, Rubisco binds either Mg(II) or Mn(II), depending on the chloroplastic ratio of these metal ions; most studies performed with Rubisco have focused on Mg-bound Rubisco. Herein, we report the first crystal structure of a Mn-bound Rubisco, and we compare its structural properties to those of its Mg-bound analogues., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

The biosorption is considered to be highly efficient for the separation of radionuclide from radioactive wastewater. Herein, the crosslinked chitosan assisted EDTA intercalated Ca-Mg-Al layered double hydroxides composite foam (CS-EDTA-LDH) was synthesized by combining EDTA intercalation and freeze-drying methods. The macroporous and ultralight properties of CS-EDTA-LDH facilitates its rapid adsorption and facile recovery, and the inorganic/organic incorporation can avoid pore collapse and provide numerous adsorption sites, while the EDTA intercalation can enhance the complex capture of U(VI). The CS-EDTA-LDH presents various functional groups (carboxyl, hydroxyl and amino groups) for U(VI) adsorption, and the adsorption capacity for U(VI) reached 272.3 mg/g at pH 5.0 and 298 K. The adsorption kinetics of U(VI) conformed to PSO equation, whereas the isotherms conformed to the Freundlich model, indicating heterogeneous adsorption with diffusion process as a rate-controlling step. The thermodynamic parameters indicate that U(VI) adsorption by CS-EDTA-LDH is endothermic and spontaneous in nature. The adsorption mechanism is related to the synergic complexation by multi-functional groups, ion exchange, and possible isomeric substitution. Overall, CS-EDTA-LDH could be a promising biosorbent for the cleanup of radioactive pollution due to its high performance for U(VI) adsorption and facile recovery., Competing Interests: Declaration of competing interest None., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Magnesium is the most promising absorbable metallic implant material for bone regeneration and alloy WE43 is already FDA approved for cardiovascular applications. This study investigates the cyto- and biocompatibility of novel additively manufactured (AM) porous WE43 scaffolds as well as their osteogenic potential and degradation characteristics in an orthotopic canine bone defect model. The cytocompatibility was demonstrated using modified ISO 10993-conform extract-based indirect and direct assays, respectively. Additionally, degradation rates of WE43 scaffolds were quantified in vitro prior to absorption tests in vivo. Complete blood cell counts, blood biomarker analyses, blood trace element analyses as well as multi-organ histopathology demonstrated excellent biocompatibility of porous y WE43 scaffolds for bone defect repair. Micro-CT analyses further showed a relatively higher absorption rate during the initial four weeks upon implantation (i.e., 36 % ± 19 %) than between four and 12 weeks (41 % ± 14 %), respectively. Of note, the porous WE43 implants were surrounded by newly formed bony tissue as early as four weeks after implantation when unmineralized trabecular ingrowth was detected. After 12 weeks, a substantial amount of mineralized bone was detected inside and around the gradually disappearing implants. This first study on AM porous WE43 implants in canine bone defects demonstrates the potential of this alloy for in vivo applications in humans. Our data further underscore the need to control initial bulk absorption kinetics through surface modifications., Competing Interests: Declaration of competing interest The authors declare that the research was conducted without any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024. Published by Elsevier B.V.)

The clarification conditions and the selection of the clarification agent are pivotal in eliminating the haze components from red grape juice (RGJ) while minimizing the loss of functional color components. In this context, we synthesized a water glass-based APTES functionalized magnesium silica aerogel (MSA-NH 3 ) incorporating 61.44 molecules/nm 2 of amine groups, resulting in a positively charged zeta potential value of 33.9 mV (pH 3.4) for clarification of RGJ by targeting negatively charged polyphenols. The optimum clarification conditions using MSA-NH 3 were determined as 0.18 g MSA-NH 3 /L RGJ, 20 °C, and 60 min through the application of Box-Behnken design. Under these conditions, MSA-NH 3 exhibited excellent adsorption of haze components (3.61 NTU), outperforming the commercial bentonite-gelatine combination (BGC) (5.45 NTU). Furthermore, it exhibited greater efficacy in preserving anthocyanins while adsorbing browning components. MSA-NH 3 has a high potential to serve as a functional alternative clarification agent in the beverage industry due to its promising clarification performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

With excessive Mn(Ⅱ) and Cu(Ⅱ) pollution in aquatic environments posing potential health risks to inhabitants, the emergence of carbon capture, utilization and storage (CCUS) technology has promoted the improvement of heavy metal remediation technologies. Using hydrothermal sediment as a crystal seed, rhamnolipid was used to mediate biomimetic mineralization to prepare hydrated magnesium carbonate (HMC) composites to enhance the Mn(Ⅱ)/Cu(Ⅱ) adsorption performance of alginate hydrogels. Hydrothermal sediment is beneficial for accelerating biomimetic mineralization, while rhamnolipid can induce a crystalline phase transformation from dypingite to nesquehonite. The addition of sediment significantly enhanced the compressive mechanical properties and thermal stability of the hydrogels. The adsorption performances of the nesquehonite and dypingite hydrogels were better for Mn(II) and Cu(II), respectively. An increase in the amount of sediment improved the adsorption of Cu(II) by the hydrogels appropriately, resulting in stronger selectivity for Cu(II). The adsorption of Mn(II) and Cu(II) on the hydrogel beads was thermodynamically spontaneous. The inhibitory effects of sodium dodecyl benzene sulfonate (SDBS), fulvic acid (FA) and alginate on Cu(II) adsorption were more obvious than those of bovine serum albumin (BSA). Both the complexation of functional groups on alginate and mineralization by HMC participated in the adsorption of Mn(II) and Cu(II)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this work, we analyzed the electrophoretic behavior of a double crossover (DX) DNA motif in various counter ions. The influence of the type and concentration of counter ions on electrophoretic behavior is different for the DX motif compared to a duplex of the same molecular weight. Higher concentrations of divalent ions Mg 2+ and Ca 2+ in the gel and running buffer reduce the electrophoretic migration of the DX motif. This effect is less pronounced in the monovalent ion Na + while K + ion did not have any significant effect on the electrophoretic behavior.

An acellular bovine bone matrix modified to release Magnesium ions (Mg 2+ ) (ABBM-Mg) was prepared and evaluated for its potential in osteogenesis and mandibular defect repair. Mg 2+ was incorporated into ABBM using an ion exchange method. The microstructure and mechanical properties of both ABBM and ABBM-Mg were analyzed using SEM and a biomechanical testing machine. Cytocompatibility, cell adhesion, and osteogenic differentiation were assessed using various methods including CCK-8, Live/Dead staining, SEM, ALP staining, and qPCR analysis in MC3T3-E1 cells. Additionally, a mandibular defect model in rats was established. The bone defect repair outcomes were evaluated using Micro-CT, histological HE staining, and Masson staining. The study showed that mineralization containing magnesium was redeposited on the surface of the three-dimensional porous ABBM, and the ABBM-Mg scaffold promoted cell proliferation and osteogenic differentiation compared to the ABBM scaffold. In the rat mandibular defect model, the ABBM-Mg scaffold demonstrated superior bone repair ability. This study successfully incorporated Mg 2+ into ABBM without significantly affecting its microstructure and compressive strength. Furthermore, ABBM-Mg showed sustained release of Mg 2+ which enhanced cell proliferation, adhesion, and osteogenic differentiation in vitro, and promoted mandibular defect healing in rats. This research opens up new possibilities for the clinical application of functionalized acellular bone matrix., (© 2024. The Author(s).)

The anti-viral drug hydroxychloroquine (HCQ) has captivated significant interest in the pharmaceutical field, as it is a quinolone derivative. Its unrestrained occurrence causes prominent health hazards owing to its persistent, carcinogenic, recalcitrant, and teratogenic nature. Herein, in this work, an experimental investigation was carried out toward the photocatalytic degradation of HCQ drug using magnesium zirconate (MgZrO 3 ) nanoparticles as an effective photocatalyst. A comprehensive characterizations of the as-synthesized material was carried out. The photocatalytic degradation of the HCQ drug was examined with various sources of light energies. The obtained outcomes indicated that ±85% of HCQ was degraded using a MgZrO 3 photocatalyst within 30 min of the reaction time under UV-visible (ultraviolet) light irradiation. Further, other significant operational parameters such as various catalyst dosages, HCQ concentrations, pH, scavengers, and salts were examined. The degradation studies revealed that the reaction followed pseudo-first-order kinetics. Hence, this perovskite-type MgZrO 3 has grasped profound attention in environmental remediation, significantly in photocatalytic degradation of HCQ drug. This comprehensive research offers green synthesis strategy as a substantial framework for providing effective photocatalyst that addresses contemporary water pollution issues linked to notable results. This aids in targeting era-driven advancements toward a clean and safe future environment.

The inorganic biopolymer polyphosphate (polyP) occurs in all domains of life and affects myriad cellular processes. A longstanding observation is polyP's frequent proximity to chromatin, and, in many bacteria, its occurrence as magnesium (Mg 2+ )-enriched condensates embedded in the nucleoid region, particularly in response to stress. The physical basis of the interaction between polyP, DNA and Mg 2+ , and the resulting effects on the organization of the nucleoid and polyP condensates, remain poorly understood. Here, using a minimal system of polyP, Mg 2+ , and DNA, we find that DNA can form shells around polyP-Mg 2+ condensates. These shells show reentrant behavior, that is, they form within a window of Mg 2+ concentrations, representing a tunable architecture with potential relevance in other multicomponent condensates. This surface association tunes condensate size and DNA morphology in a manner dependent on DNA length and concentration, even at DNA concentrations orders of magnitude lower than found in the cell. Our work also highlights the remarkable capacity of two primordial inorganic species to organize DNA., (© 2024. The Author(s).)

The aim of this study was to evaluate safety and efficacy of a poly-L-lactic acid (PLLA)-coated magnesium (Mg)-Dysprosium (Dy) membrane in guided bone regeneration (GBR) using a rabbit calvarium model. The microstructure of the Mg-Dy membrane surface and thickness of the PLLA coating were examined. In vitro degradation and cytotoxicity test was conducted. The in vivo study used 24 white male rabbits with two 8 mm-diameter defects created on the calvaria; 12 defects were randomly assigned per group: (1) Negative control, (2) positive control, (3) uncoated Mg, and (4) PLLA-coated Mg group. Specimens were harvested at 4, 8, and 12 weeks postoperatively for radiological, histological, and histomorphometric analyses. The PLLA-coated Mg-Dy membrane showed a low degree of degradation, indicating that the coating exerted a protective effect. In the cytotoxicity test, no deformed or degenerated cells were observed. In the in vivo study, radiographic and histomorphometric analyses indicated favorable new bone formation and maintenance of the graft material for PLLA-coated Mg group. PLLA-coated Mg group, compared to the uncoated counterpart, restored the bony contour more completely, without inducing significant inflammatory response. Our results support the safety and efficacy of PLLA-coated Mg-Dy membranes for GBR both in vitro and in vivo., (© 2024. The Author(s).)

Herein, Mg/Al-loaded sludge-based biochar was prepared via electro-assisted impregnation. The structure and chemical analysis of modified sludge-based biochar (MgSBC-0.5(@Al) showed that the material was loaded with MgO and Al2O3. The specific surface area of MgSBC-0.5(@Al) was 11.27 times higher than that of unmodified sludge-based biochar (SBC). The simultaneous adsorption performance of MgSBC-0.5(@Al for ammonia nitrogen (NH4+-N) and phosphate phosphorus (PO43--P) was studied. The maximum adsorption capacities of MgSBC-0.5(@Al for NH4+-N and PO43--P at 298 K were 65.19 and 92.10 mg·g-1, respectively, 4.45 and 6.28 times higher than those of SBC. The external and internal elemental compositions of the modified and unmodified biochar specimens were quantitatively characterized using inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, and X-ray fluorescence spectrometry. The results emphasized the importance of Mg-loading for NH4+-N and PO43--P capture. MgO was mainly loaded on the surface of biochar, enabling adsorption through chemical reactions. Analysis showed that the adsorption of NH4+-N and PO43--P on the modified biochar proceeded simultaneously through multiple mechanisms. Particularly, the adsorption of NH4+-N and PO43--P occurred through the precipitation of struvite and physical adsorption, with PO43--P also adsorbed through the formation of MgHPO4 and CaHPO4. Other data indicated that Al, Ca, and Fe had a trapping effect on the adsorbate. Importantly, the biochar after adsorption could be used as a soil amendment., Competing Interests: NO authors have competing interests., (Copyright: © 2024 Wang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Natural polymers and synthetic polymers have been extensively studied as scaffold materials, with the former offering advantages such as biocompatibility, biodegradability, and structural similarity to the natural extracellular matrix (ECM). However, the use of natural polymers in extrusion-based 3D printing has been limited by their poor mechanical properties and challenging rheological properties. In this study, gelatin and sodium alginate were utilized as scaffold materials, with the addition of Ca 2+ and Mg 2+ components to enhance their physical and chemical properties, and influence early cell behavior. Subsequently, these materials were fabricated into scaffolds using 3D printing. Our results demonstrated that the addition of Ca 2+ and Mg 2+ could improve the compactness of the 3D network structure, mechanical strength, swelling properties and degradation properties of methacrylated gelatin/methacrylated sodium alginate (GelMA/SAMA) composite hydrogel. In vitro cell tests revealed that the GelMA/SAMA composite hydrogel exhibited negligible cytotoxicity and promoted early cell viability, particularly with the higher concentration of Mg 2+ in the material. Notably, the extrusion 3D printing process successfully produced GelMA/SAMA scaffolds. These results collectively indicate that GelMA/SAMA composite scaffolds hold promise as potential biomaterials for tissue engineering applications.

The sustainable development strategy shifts water treatment from pollution removal to resource recovery. Here, an electrochemical resource-recovery anaerobic membrane bioreactor (eRAnMBR) that employed a magnesium plate and conductive membrane as dual anodes is presented and shows excellent performance in carbon, nitrogen, and phosphorus recovery, as well as 95% membrane anti-fouling. The Mg 2+ released alters the physicochemical properties of sludge, unblocking the cake layer, and recovers ammonium and phosphate, yielding 60.64% purity and 0.08 g d -1 struvite deposited onto cathode to be separated from sludge. The enhanced direct interspecies electron transfer, along with hydrogen evolution and alkalinity increase due to the electrochemical reactions, significantly increase methane yield and purity (93.97%) of the eRAnMBR. This increased internal energy can cover the additional electricity and electrode consumption. This integrated eRAnMBR reactor boasts the benefits of short process, low maintenance, and low carbon footprint, introducing a concept for the next generation of wastewater treatment., (© 2024. The Author(s).)

Magnesium ions play an important immune-regulatory role during bone repair. For this study, we prepared micro-nano bioactive glass (MNBG) containing magnesium, which can release magnesium, silicon, and calcium ions and has a positive impact on osteogenic differentiation and vascular regeneration. In this study, MgMNBG was compounded and combined with poly(lactic-co-glycolic acid (PLGA) and polycaprolactone (PCL) for 3D printing. Afterwards, the physicochemical properties and bone repair performance of the scaffolds were evaluated through in vitro and in vivo experiments. We also investigated the effects of MgMNBG on osteogenic differentiation, immune regulation, and vascular regeneration. The results showed that MgMNBG can inhibit inflammation and promote osteogenesis and angiogenesis by regulating macrophages. PLGA/PCL/MgMNBG scaffolds have good osteogenic and angiogenic effects, and the composite scaffolds have excellent bone repair performance and potential application value., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Epidural fibrosis is a primary contributor to the failure of laminectomy surgeries, leading to the development of failed back surgery syndrome (FBSS). Post-laminectomy, neutrophils infiltrate the surgical site, generating neutrophil extracellular traps (NETs) that contribute to epidural fibrosis. Reactive oxygen species (ROS) play a pivotal role in mediating NETs formation. Molecular hydrogen, recognized for its selective antioxidant properties and biosafety, emerges as a potential therapeutic gas in suppressing epidural fibrosis. In this study, we developed an in-situ hydrogen release hydrogel that inhibits the formation of NETs and mitigates epidural scarring. Biodegradable magnesium (Mg) microspheres served as a hydrogen source, coated with PLGA to regulate hydrogen release. These microspheres (Mg@PLGA) were then incorporated into a PLGA-PEG-PLGA thermosensitive hydrogel (Mg@PLGA@Gel), providing a surgical implant for sustained, long-term hydrogen release. In vitro experiments confirmed the biocompatibility of the system, demonstrating that hydrogen produced by Mg@PLGA effectively neutralizes neutrophil intracellular ROS and inhibits NETs formation. Histological analyses, including H&E staining, MRI, Masson staining, and immunohistochemistry, collectively indicate that Mg@PLGA@Gel is biocompatible and effectively inhibits epidural fibrosis post-laminectomy. Furthermore, Mg@PLGA@Gel inhibits ROS accumulation and NETs formation at the surgical site. These findings suggest that Mg@PLGA@Gel ensures continuous, therapeutic hydrogen concentration, providing relief from epidural fibrosis in a laminectomy mouse model. STATEMENT OF SIGNIFICANCE., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Calcium alginate is one of the most widely employed matrices in regenerative medicine. A downside is its heterogeneity, due to the poorly controllable character of the gelation of sodium alginate (NaAlg), i.e. the commonly used alginate salt, with calcium. Here, we have used magnesium alginate (MgAlg) as an alternative precursor of calcium alginate. MgAlg coils, more compact and thus less entangled than those of NaAlg, allow for an easier diffusion of calcium ions, whereas Mg is exchanged with calcium more slowly than Na; this allows for the formation of a material (Ca(Mg)Alg) with a more reversible creep behaviour than Ca(Na)Alg, due to a more homogeneous - albeit lower - density of elastically active cross-links. We also show that Ca(Mg)Alg supports better than Ca(Na)Alg the network development and function of embedded (rat cortical) neurons: they show greater neurite extension and branching at 7 and 21 days (Tubb3 and Map2 immunofluorescence) and better neuronal network functional maturation / more robust and longer-lasting activity, probed by calcium imaging and microelectrode array electrophysiology. Overall, our results unveil the potential of MgAlg as bioactive biomaterial for enabling the formation of functional neuron-based tissue analogues., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Gabriella Panuccio, Gemma Palazzolo, Giulia Della Rosa, Natalia Gostynska, John Ephraim report financial support was provided by Italian Institute of Technology. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Pure zinc exhibits low mechanical properties, making it unsuitable for use in guided bone regeneration (GBR) membranes. The present study focused on the preparation of Zn alloy GBR films using powder metallurgy, resulting in Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR films. The tensile strength of the pure Zn GBR film measured 85.9 MPa, while an elongation at break was 13.5%. In contrast, Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR films demonstrated significantly higher tensile strengths of 145.3 and 164.4 MPa, respectively, whereas elongations at break were 30.2% and 19.3%. The addition of Ti, Fe, and Mg substantially enhanced the mechanical properties of the zinc alloys. Corrosion analysis revealed that Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR membranes exhibited corrosion potentials of -1.298 and -1.316 V, respectively, with corresponding corrosion current densities of 12.11 and 13.32 μA/cm 2 . These values were translated to corrosion rates of 0.181 and 0.199 mm/year, indicating faster corrosion rates compared to pure Zn GBR membranes, which displayed a corrosion rate of 0.108 mm/year. Notably, both Zn-based alloy GBR membranes demonstrated excellent cytocompatibility, with a cytotoxicity rating of 0-1 in 25% leachate. Additionally, these membranes exhibited favorable osteogenic ability, as evidenced by the quantitative bone volume/tissue volume ratios (BV/TV) of new bone formation, which reached 30.3 ± 1.4% and 65.5 ± 1.8% for the Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR membranes, respectively, after 12 weeks of implantation. These results highlighted the significant potential for facilitating new bone growth. The proposed Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg alloy GBR membranes showed promise as viable biodegradable materials for future clinical studies.

Riboswitches regulate downstream gene expression by binding to specific small molecules or ions with multiple mechanisms to transfer the binding information. In the case of the fluoride riboswitch, the transcription termination signal is conveyed through a transient excited state (ES). In this work, we performed conventional molecular dynamics (MD) simulations, totaling 180 μs, to obtain the ES structure and investigate the mechanism underlying information transmission in Mg 2+ /F - binding within the fluoride riboswitch aptamer. The Mg 2+ /F - binding pocket exhibits various conformations in its apo form. A series of ES structures were extracted from the MD trajectories of the apo form. The dynamics of the Mg 2+ /F - binding pocket influenced key pair A40-U48 in ES structures. The pathway connecting the binding pocket to the pair involves interactions between the phosphate groups of U7 and G8 and the nucleobases of G8-C47-U48. Our work presents a structural ensemble of the ES and elucidates a pathway for transferring Mg 2+ /F - binding information, thereby facilitating the understanding of how the holo-like apo state achieves transcriptional repression.

The implications of retained strain on in vitro and in vivo degradation behavior as well as cytocompatibility of the Mg-4Zn-0.5Ca-0.8Mn alloy is comprehensively studied. The retained strain is induced in homogenized specimens by hard-plate hot forging (HPHF) at a temperature (523 K) lower than the recrystallization temperature of the alloy. The retained strain generated during deformation process deteriorated the corrosion response of the deformed alloy as compared to its homogenized counterpart. The strained area of deformed specimen with high dislocation density promoted defect generation (oxygen vacancies) in the film and facilitated preferential migration of ions, consequently leading to formation of a nonuniform product film with low protectiveness. In addition to strain magnitude, the distribution of retained strain also influenced the product film properties in the deformed specimens. An even distribution of retained strain improved the uniformity of the product film to certain extent by providing greater film coverage, resulting in higher film resistance. After 24 h of immersion, the protectiveness of the film was further improved in this specimen due to annihilation of defects through homogeneous ionic migration, which led to the development of a uniform and stable film that restricted further ionic diffusion. The dissolution of Zn(OH) 2 into Zn 2+ ions was promoted at lower pH, resulting in enhanced antimicrobial activity in the specimen with the lowest degradation. Besides, the specimen with stable product film not only minimized the rate of further degradation but also served as an interface for new bone growth, as evident from in vivo studies.

Scaffolds play a crucial role in bone tissue engineering to support the defect area through bone regeneration and defect reconstruction. Promising tissue regeneration without negative repercussions and avoidance of the lifelong presence inside the body make bioresorbable metals prosper in the field of regenerative medicine. Recently, Zn and its alloys have emerged as promising biodegradable materials for their moderate degradation rate and satisfactory biocompatibility. Nevertheless, it is very challenging for cells to adhere and grow over the Zn surface alone, which influences the tissue-implant integration. In this study, an attempt has been made to systematically investigate the bioactivity responses in terms of in vitro hemocompatibility, cytotoxicity, antibacterial activity, and in vivo biocompatibility of newly developed Zn-2Cu-0.5Mn/Mg alloy scaffolds with different surface roughness. The rough surface of Zn-2Cu-0.5Mg shows the highest degradation rate of 0.16 mm/yr. The rough surface exhibits a prominent role in the adsorption of protein, further enhancing cell adhesion. Concentration-dependent alloy extract shows the highest cell proliferation for 12.5% of the extract with a maximum cell viability of 101% in Zn-2Cu-0.5Mn and 108% in Zn-2Cu-0.5Mg after 3 d. Acceptable hemolysis percentages (less than 5%) with promising anticoagulation properties are observed for all of the conditions. Enhanced antibacterial ( Staphylococcus aureus and Escherichia coli ) activity due to a significant effect of ions illustrates the maximum killing effect on the bacterial colony for the rough Zn-2Cu-0.5Mg alloy. In addition, it is observed that for rough Zn-2Cu-0.5Mn/Mg alloys, the inflammatory response is minimal after subcutaneous implantation, and neo-bone tissue forms in the defect areas of the rat femur with satisfactory biosafety response. The osseointegration property of the Zn-2Cu-0.5Mg alloy is comparable to that of the Zn-2Cu-0.5Mn alloy. Therefore, the rough surface of the Zn-2Cu-0.5Mg alloy has the potential to enhance biocompatibility and promote better osseointegration activity with host tissues for various biomedical applications.

Acinetobacter baumannii ( A. baumannii ) challenges clinical infection treatment due to its resistance to various antibiotics. Multiple resistance genes in the core genome or mobile elements contribute to multidrug resistance in A. baumannii . Macrolide phosphotransferase gene mphE has been identified in A. baumannii , which is particularly relevant to macrolide antibiotics. Here, we determined the structure of MphE protein in three states: the apo state, the complex state with erythromycin and guanosine triphosphate (GTP), and the complex state with azithromycin and guanosine. Interestingly, GTP and two magnesium ions were observed in the erythromycin-bound MphE complex. This structure captured the active state of MphE, in which the magnesium ions stabilized the active site and assisted the transfer of phosphoryl groups. Based on these structures, we verified that the conserved residues Asp29, Asp194, His199, and Asp213 play an important role in the catalytic phosphorylation of MphE leading to drug resistance. Our work helps to understand the molecular basis of drug resistance and provides reference targets for optimizing macrolide antibiotics.

Mosquito-borne flaviviruses including dengue, Zika, yellow fever, and regional encephalitis produce a large amount of short subgenomic flaviviral RNAs during infection. A segment of these RNAs named as xrRNA1 features a multi-pseudoknot (PK)-associated structure, which resists the host cell enzyme (XRN1) from degrading the viral RNA. We investigate how this long-range RNA PK folds in the presence of counterions, specifically in a mix of monovalent (K + ) and divalent (Mg 2+ ) salts at physiological concentrations. In this study, we use extensive explicit solvent molecular dynamics (MD) simulations to characterize the RNA ion environment of the folded RNA conformation, as determined by the crystal structure. This allowed us to identify the precise locations of various coordinated RNA-Mg 2+ interactions, including inner-sphere/chelated and outer-sphere coordinated Mg 2+ . Given that RNA folding involves large-scale conformational changes, making it challenging to explore through classical MD simulations, we investigate the folding mechanism of xrRNA1 using an all-atom structure-based RNA model with a hybrid implicit-explicit treatment of the ion environment via the dynamic counterion condensation model, both with and without physiological Mg 2+ concentration. The study reveals potential folding pathways for this xrRNA1, which is consistent with the results obtained from optical tweezer experiments. The equilibrium and free energy simulations both capture a dynamic equilibrium between the ring-open and ring-close states of the RNA, driven by a long-range PK interaction. Free energy calculations reveal that with the addition of Mg 2+ ions, the equilibrium shifts more toward the ring-close state. A detailed analysis of the free energy pathways and ion-mediated contact probability map highlights the critical role of Mg 2+ in bridging G50 and A33. This Mg 2+ -mediated connection helps form the long-range PK which in turn controls the transition between the ring-open and ring-close states. The study underscores the critical role of Mg 2+ in the RNA folding transition, highlighting specific locations of Mg 2+ contributing to the stabilization of long-range PK connections likely to enhance the robustness of Xrn1 resistance of flaviviral xrRNAs.

Biodegradable polymer-based nanocomposite coatings provide multiple advantages to modulate the corrosion resistance and cytocompatibility of magnesium (Mg) alloys for biomedical applications. Biodegradable poly(glycerol sebacate) (PGS) is a promising candidate used for medical implant applications. In this study, we synthesized a new PGS nanocomposite system consisting of hydroxyapatite (HA) and magnesium oxide (MgO) nanoparticles and developed a spray coating process to produce the PGS nanocomposite layer on pretreated Mg substrates, which improved the coating adhesion at the interface and their cytocompatibility with bone marrow derived mesenchymal stem cells (BMSCs). Prior to the spray coating process of polymer-based nanocomposites, the Mg substrates were pretreated in alkaline solutions to enhance the interfacial adhesion strength of the polymer-based nanocomposite coatings. The addition of HA and MgO nanoparticles (nHA and nMgO) to the PGS matrix, as well as the alkaline pretreatment of the Mg substrates, significantly enhanced the interfacial adhesion strength when compared with the PGS coating on the nontreated Mg control. The average BMSC adhesion densities were higher on the PGS/nHA/nMgO coated Mg than the noncoated Mg controls under direct contact conditions. Moreover, the addition of nHA and nMgO to the PGS matrix and coating the nanocomposite onto Mg substrates increased the average BMSC adhesion density when compared with the PGS/nHA/nMgO coated titanium (Ti) and PGS coated Mg controls under direct contact. Therefore, the spray coating process of PGS/nHA/nMgO nanocomposites on Mg substrates or other biodegradable metal substrates could provide a promising surface treatment strategy for biodegradable implant applications.

In surgical medicine, suturing is the standard treatment for large incisions, yet traditional sutures are limited in functionality. Electrical stimulation is a non-pharmacological therapy that promotes wound healing. In this context, we designed a passive and biodegradable mechanoelectric suture. The suture consists of multi-layer coaxial structure composed of (poly(lactic-co-glycolic acid), polycaprolactone) and magnesium to allow safe degradation. In addition to the excellent mechanical properties, the mechanoelectrical nature of the suture grants the generation of electric fields in response to movement and stretching. This is shown to speed up wound healing by 50% and reduce the risk of infection. This work presents an evolution of the conventional wound closure procedures, using a safe and degradable device ready to be translated into clinical practice., (© 2024. The Author(s).)

Metal ions have important roles in supporting the catalytic activity of DNA-regulating enzymes such as topoisomerases (topos). Bacterial type II topos, gyrases and topo IV, are primary drug targets for fluoroquinolones, a class of clinically relevant antibacterials requiring metal ions for efficient drug binding. While the presence of metal ions in topos has been elucidated in biochemical studies, accurate location and assignment of metal ions in structural studies have historically posed significant challenges. Recent advances in X-ray crystallography address these limitations by extending the experimental capabilities into the long-wavelength range, exploiting the anomalous contrast from light elements of biological relevance. This breakthrough enables us to confirm experimentally the locations of Mg 2+ in the fluoroquinolone-stabilized Streptococcus pneumoniae topo IV complex. Moreover, we can unambiguously identify the presence of K + and Cl - ions in the complex with one pair of K + ions functioning as an additional intersubunit bridge. Overall, our data extend current knowledge on the functional and structural roles of metal ions in type II topos., Competing Interests: Competing interests statement:The authors declare no competing interest.

A key factor in biomineralization is the use of organic molecules to direct the formation of inorganic materials. However, identification of molecules that can selectively produce the calcium carbonate polymorphs calcite or aragonite has proven extremely challenging. Here, we use a phage display approach to identify proteins - rather than the short peptides typically identified using this method - that can direct calcium carbonate formation. A 1.3 × 10 10 library of Affimer proteins was displayed on modified M13 phage, where an Affimer is a ≈13 kDa protein scaffold that displays two variable regions of 9-13 residues. The phage displaying the Affimer library were then screened in binding assays against calcite and aragonite at pH 7.4, and four different strongly-binding proteins were identified. The two aragonite-binding proteins generated aragonite when calcium and magnesium ions were present at a 1 : 1 ratio, while the calcite-binding proteins produce magnesium-calcite under the same conditions. Calcite alone formed in the presence of all four proteins in the absence of magnesium ions. In combination with molecular dynamics simulations to evaluate the conformations of the proteins in solution, this work demonstrates the importance of conformation in polymorph control, and highlights the importance of magnesium ions, which are abundant in seawater, to reduce the energetic barriers associated with aragonite formation.

Struvite recovery shows significant potential for simultaneously recovering nitrogen (N) and phosphorus (P) from swine wastewater but is challenged by the occurrence and transformation of antibiotic residuals. Electrochemically mediated struvite precipitation with sacrificial magnesium anode (EMSP-Mg) is promising due to its automation and chemical-free merits. However, the fate of antibiotics remains underexplored. We investigated the behavior of sulfadiazine (SD), an antibiotic frequently detected but less studied than others within the EMSP-Mg system. Significantly less SD (≤ 5%) was co-precipitated with recovered struvite in EMSP-Mg than conventional chemical struvite precipitation (CSP) processes (15.0 to 50.0%). The reduced SD accumulation in struvite recovered via EMSP was associated with increased pH and electric potential differences, which likely enhanced the electrostatic repulsion between SD and struvite. In contrast, the typical strategies used in enhancing P removal in the EMSP-Mg system, including increasing the Mg/P ratio or the Mg-release rates, have shown negligible effects on SD adsorption. Furthermore, typical coexisting ions (Ca 2+ , Cl - , and HCO 3 - ) inhibited SD adsorption onto recovered products. These results provide new insights into the interactions between antibiotics and struvite within the EMSP-Mg system, enhancing our understanding of antibiotic migration pathways and aiding the development of novel EMSP processes for cleaner struvite recovery., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Infected bone defects are one of the most challenging problems in the treatment of bone defects due to the high antibiotic failure rate and the lack of ideal bone grafts. In this paper, inspired by clinical bone cement filling treatment, α-c phosphate (α-TCP) with self-curing properties is composited with β-tricalcium phosphate (β-TCP) and constructed a bionic cancellous bone scaffolding system α/β-tricalcium phosphate (α/β-TCP) by low-temperature 3D printing, and gelatin is preserved inside the scaffolds as an organic phase, and later loaded with a metal-polyphenol network structure of tea polyphenol-magnesium (TP-Mg) nanoparticles. The scaffolds mimic the structure and components of cancellous bone with high mechanical strength (>100 MPa) based on α-TCP self-curing properties through low-temperature 3D printing. Meanwhile, the scaffolds loaded with TP-Mg exhibit significant inhibition of Staphylococcus aureus (S.aureus) and promote the transition of macrophages from M1 pro-inflammatory to M2 anti-inflammatory phenotype. In addition, the composite scaffold also exhibits excellent bone-enhancing effects based on the synergistic effect of Mg 2+ and Ca 2+ . In this study, a multifunctional ceramic scaffold (α/β-TCP@TP-Mg) that integrates anti-inflammatory, antibacterial, and osteoinduction is constructed, which promotes late bone regenerative healing while modulating the early microenvironment of infected bone defects, has a promising application in the treatment of infected bone defects., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

The Mg-ion battery faces significant limitations due to its liquid electrolyte, which suffers from inherent issues such as leakage and the growth of Mg dendrites. In contrast, gel polymer electrolytes (GPEs) offer heightened safety, a wide voltage window, and excellent flexibility, making them a promising alternative with outstanding electrochemical performance. In this study, a cyano-modified cellulose (CEC) GPE was engineered to aim at enhancing ion transportation and promoting uniform ion-flux through interactions between N and Mg 2+ ions. The resulting CEC-based GPE demonstrated a high ionic conductivity of 1.73 mS cm -1 at room temperature. Furthermore, it exhibited remarkable Mg plating/stripping performance (coulombic efficiency ∼96.7 %) and compatibility with electrodes. Importantly, when employed in a Mo6S8//Mg battery configuration, the CEC GPE displayed exceptional cycle stability, with virtually no degradation observed even after 650 cycles at 1C, thereby significantly advancing Mg-ion battery technology due to its excellent electrochemical properties. This study provides valuable insights into the molecular engineering of cellulose-based GPEs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Rapid and effective simultaneous removal of algal and extracellular organic matter (EOM) is essential for algal blooms water emergency treatment. In this study, a composite material was prepared by physical and chemical interaction between La-montmorillonite (La-MMT) and Mg/Al-layered double hydroxide (LDHs), and its removal effect of algal and extracellular organic matters (EOM) was investigated. The results showed that the removal rate of chlorophyll a ( chl-a ) was 96.8% within 2 h when the LDHs/La-MMT 2:1 dosage was 1.0 g/L. Three-dimensional fluorescence characteristic spectra and parallel factor analysis showed that the removal of EOM by composite material mainly reflected in the removal of humus-like substances. The reaction heat of composite material for the algal solution was -32.7 J/g. Zeta potential changed from -25.7 mV to -16.9 mV, the main treatment mechanisms of composite material were surface adsorption, complexation precipitation, charge neutralisation, and ion exchange. These findings herein proposed that composite material was a potential and proper treating agent for removing algal cells and EOM from algal blooms water.

Although magnesium alloy has received tremendous attention in biodegradable cardiovascular stents, the poor in vivo corrosion resistance and limited endothelialization are still the bottlenecks for its application in cardiovascular stents. Fabrication of the multifunctional bioactive coating with excellent anti-corrosion on the surface is beneficial for rapid re-endothelialization and the normal physiological function recovery of blood vessels. In the present study, a bioactive hydrogel coating was established on the surface of magnesium alloy by copolymerization of sulfobetaine methacrylate (SBMA) and acrylamide (AM) via ultraviolet (UV) polymerization, followed by the immobilization of fucoidan (Fu). The results showed that the as-prepared multifunctional hydrogel coating could enhance the corrosion resistance and the surface wettability of the magnesium alloy surface, endowing it with the ability of selective albumin adsorption; meanwhile, it could augment biocompatibility. The following introduction of fucoidan on the surface could further improve the hemocompatibility characterized by reducing protein adsorption, minimizing hemolysis, and preventing platelet aggregation and activation. Additionally, the immobilized fucoidan promoted endothelial cell (EC) growth, as well as up-regulated the expression of vascular endothelial growth factor (VEGF) and nitric oxide (NO) in endothelial cells (ECs). Consequently, this research paves a novel approach to developing a versatile bioactive coating for magnesium alloy surfaces and lays a foundation in cardiovascular biomaterials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, the interaction of pure Mg and WE43 alloy under the presence of osteoblast (OB) and osteoclast (OC) cells and their influence on the degradation of materials have been deeply analyzed. Since OB and OC interaction has an important role in bone remodeling, we examined the surface morphology and dynamic changes in the chemical composition and thickness of the corrosion layers formed on pure Mg and WE43 alloy by direct monoculture and coculture of pre-differentiated OB and OC cells in vitro. Electrochemical techniques examined the corrosion performance. The corrosion products were characterized using a combination of the focused ion beam (FIB), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). Cell viability and morphology were assessed by fluorescent microscopy and SEM. Our findings demonstrate cell spread and attachment variations, which differ depending on the Mg substrates. It was clearly shown that cell culture groups delayed degradation processes with the lowest corrosion rate observed in the presence of OBOC coculture for the WE43 substrate. Ca-P enrichment was observed in the outer-middle region of the corrosion layer but only after 7 days of OBOC coculture on WE43 and after 14 days on the pure Mg specimens. STATEMENT OF SIGNIFICANCE: Magnesium metallic materials that can degrade over time provide distinct opportunities for orthopedic application. However, there is still a lack, especially in elucidating cell-material interface characterization. This study investigated the influence of osteoblast-osteoclast coculture in direct Mg-material contact. Our findings demonstrated that pre-differentiated osteoblasts and osteoclasts cocultured on Mg substrates influenced the chemistry of the corrosion layers. The cell spread and attachment were Mg substrate-dependent. The findings of coculturing bone cells directly on Mg materials within an in vitro model provide an effective approach for studying the dynamic degradation processes of Mg alloys while also elucidating cell behavior and their potential contribution to the degradation of these alloys., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Pullulan-based composite film can be a potential alternative packing material to non-environmentally friendly plastic wrap (PE) to preserve fresh-cut carrots. However, many developed pullulan-based composites either have high water vapor permeability (WVP) and high mechanical strength or vice versa, which limits the practicality of the developed packaging materials for potential commercialization. Herein, Abelmoschus manihot gum (AMG)/pullulan/magnesium L-ascorbate (MLA) was created as a green composite film (APL) to preserve fresh-cut carrots. The optimal amount of MLA was found to be 10 % (APL10), demonstrating a balance of lower WVP and greater mechanical strength and antioxidant performance than many pullulan-based films. This effectively solved many problems faced by other pullulan-based packaging films. After the fresh-cut carrots were packed with the composite film for 4 days, it was found that APL10 was effective in preserving the quality of carrots, in terms of freshness, weight loss rate, Vitamin C (VC), and malondialdehyde (MDA) content after 4 days of storage, much better than non-biodegradable PE. Thus, based on these findings, it is concluded that APL films have huge potential as a green packaging material for food to replace PE in the future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study evaluated the effect of solvent acids on the structure and corrosion resistance performance of chitosan (CS) film on MAO-treated AZ31B magnesium (Mg) alloy. Initially, CS solutions were prepared in four solvent acids: acetic acid (HAc), lactic acid (LA), hydrochloric acid (HCl), and citric acid (CA). The CS films were subsequently deposited on MAO-treated AZ31B Mg alloy via a dip-coating technique. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FT-IR), contact angle measurement, and atomic force microscopy (AFM) were employed to characterize the surface and cross-sectional morphology as well as chemical composition. Furthermore, the samples were subjected to potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) tests to assess their resistance against corrosion in simulated body fluid (SBF). These results indicated that the CS film prepared with LA exhibited the lowest surface roughness (R a  = 31.2 nm), the largest contact angle (CA = 98.50°), and the thickest coating (36 μm). Additionally, it demonstrated superior corrosion protection performance, with the lowest corrosion current density (I corr  = 3.343 × 10 -7 A/cm 2 ), highest corrosion potential (E corr  = -1.49 V), and highest polarization resistance (R p  = 5.914 × 10 4  Ω·cm 2 ) in SBF. These results indicated that solvent acid types significantly influenced their interactions with CS. Thus, the structure and corrosion protection performance of CS films can be optimized by selecting an appropriate solvent acid., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

As key mediators in a wide array of signaling events, phosphoinositides (PIPs) orchestrate the recruitment of proteins to specific cellular locations at precise moments. This intricate spatiotemporal regulation of protein activity often necessitates the localized enrichment of the corresponding PIP. We investigate the extent and thermal stabilities of phosphatidylinositol-4-phosphate (PI(4)P), phosphatidylinositol-4,5-bisphosphate (PI(4,5)P 2 and phosphatidylinositol-3,4,5-trisphosphate (PI(3,4,5)P 3 ) clusters with calcium and magnesium ions. We observe negligible or minimal clustering of all examined PIPs in the presence of Mg 2+ ions. While PI(4)P shows in the presence of Ca 2+ no clustering, PI(4,5)P 2 forms with Ca 2+ strong clusters that exhibit stablity up to at least 80°C. The extent of cluster formation for the interaction of PI(3,4,5)P 3 with Ca 2+ is less than what was observed for PI(4,5)P 2 , yet we still observe some clustering up to 80°C. Given that cholesterol has been demonstrated to enhance PIP clustering, we examined whether bivalent cations and cholesterol synergistically promote PIP clustering. We found that the interaction of Mg 2+ or Ca 2+ with PI(4)P remains extraordinarily weak, even in the presence of cholesterol. In contrast, we observe synergistic interaction of cholesterol and Ca 2+ with PI(4,5)P 2 . Also, in the presence of cholesterol, the interaction of Mg 2+ with PI(4,5)P 2 remains weak. PI(3,4,5)P 3 does not show strong clustering with cholesterol for the experimental conditions of our study and the interaction with Ca 2+ and Mg 2+ was not influenced by the presence of cholesterol., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Over recent years, we have been living under a pandemic, caused by the rapid spread of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV2). One of the major virulence factors of Coronaviruses is the Non-structural protein 1 (Nsp1), known to suppress the host cells protein translation machinery, allowing the virus to produce its own proteins, propagate and invade new cells. To unveil the molecular mechanisms of SARS-CoV2 Nsp1, we have addressed its biochemical and biophysical properties in the presence of calcium, magnesium and manganese. Our findings indicate that the protein in solution is a monomer and binds to both manganese and calcium, with high affinity. Surprisingly, our results show that SARS-CoV2 Nsp1 alone displays metal-dependent endonucleolytic activity towards both RNA and DNA, regardless of the presence of host ribosome. These results show Nsp1 as new nuclease within the coronavirus family. Furthermore, the Nsp1 double variant R124A/K125A presents no nuclease activity for RNA, although it retains activity for DNA, suggesting distinct binding sites for DNA and RNA. Thus, we present for the first time, evidence that the activities of Nsp1 are modulated by the presence of different metals, which are proposed to play an important role during viral infection. This research contributes significantly to our understanding of the mechanisms of action of Coronaviruses., (© 2024. The Author(s).)

Oral ulcers are a common oral mucosal disease that seriously affect the quality of life. Traditional drug treatments have shown unsatisfactory efficacy and potential adverse reactions. In this study, curcumin-loaded multifunctional magnesium metal-organic framework-embedded hyaluronic acid-soluble microneedles patches were developed to optimize treatment strategies for oral ulcers. This microneedles patch achieves efficient release of curcumin and Mg 2+ in the ulcer through precisely targeted delivery and controllable release mechanism, significantly regulates inflammation, promotes cell migration and angiogenesis, and accelerates the ulcer healing process. At the same time, the synergistic effect of curcumin and gallic acid effectively alleviated oxidative stress, while the backplate ε-poly-L-lysine and needle tip Mg 2+ jointly constructed an antibacterial barrier to effectively inhibit pathogens. Verification using an oral ulcer rat model showed that the microneedles patch exhibited excellent therapeutic effects. This not only opens up a new avenue for clinical oral treatment but also marks a breakthrough in nanobiomaterials science and drug delivery technology and heralds a broad prospect in the field of oral ulcer treatment in the future., (© 2024. The Author(s).)

Tissue engineering scaffolds are three-dimensional structures that provide an appropriate environment for cellular attachment, proliferation, and differentiation. Depending on their specific purpose, these scaffolds must possess distinct features, including appropriate mechanical properties, porosity, desired degradation rate, and cell compatibility. This investigation aimed to fabricate a new nanocomposite scaffold using a 3D printing technique composed of poly(ε-caprolactone) (PCL)/Gelatin (GEL)/ordered mesoporous calcium-magnesium silicate (om-CMS) particles. Different weight ratios of om-CMS were added and optimized, and a series of scaffolds were constructed for comparison purposes, including PCL 50%/Gel 50%, PCL 50%/Gel 45%/om-CMS%5, and PCL 50%/Gel 40%/om-CMS%10. The optimized weight ratio of om-CMS was 10% without leaving behind negative effects on the filaments' structure. The scaffolds' physical and chemical properties were assessed using various techniques, and their degradation rate, bioactivity potential, cell viability, attachment, and ALP activity were evaluated in vitro. The results demonstrated that the PCL 50%/Gel 40%/om-CMS10% scaffold had promising potential for further studies in bone tissue regeneration., (© 2024. The Author(s).)

Zinc-based alloys, specifically Zn-Mg, have garnered considerable attention as promising materials for biodegradable implants due to their favorable mechanical strength, appropriate corrosion rate, and biocompatibility. Nevertheless, the alloy's lack of mechanical stability and integrity, resulting from ductility loss induced by age hardening at room temperature, hampers its practical bioapplication. In this study, ceramic nanoparticles have been successfully incorporated into the Zn-Mg alloy system, leading to a significant improvement in long-term stability as well as mechanical strength and ductility. In addition, this study represents the first investigation of Zn-based nanocomposites both in vitro and in vivo to comprehend the influence of nanoparticles on the degradation behavior and biocompatibility of the Zn system. The findings indicate that the incorporation of WC nanoparticles effectively refines and stabilizes the degradation behavior of Zn-Mg without negatively impacting the cytocompatibility of the alloy. The subcutaneous implantation and femoral implantation further prove the benefits of nanoparticle incorporation and found no negative effects. Collectively, Zn-Mg-WC nanocomposites yield great potential for implant usage.

Crevice corrosion at the implantation sites cannot be neglected in clinical applications of biodegradable zinc alloys as implants. In this study, a crevice corrosion protocol was designed to investigate the crevice corrosion behavior of the Zn-0.45Mn-0.2Mg (ZMM42) alloy for the first time, by varying crevice thicknesses in simulated body fluid (SBF) through immersion and electrochemical analysis. The results indicated that the ZMM42 alloy was susceptible to crevice corrosion in the range from 0.03 mm to 0.2 mm. When the crevice thickness was 0.05 mm, the crevice corrosion of the specimen became more severe compared to other thicknesses.

Magnesium (Mg 2+ ) is the most abundant divalent cation in the cell and is essential to nearly every biochemical reaction involving adenosine triphosphate (ATP) and its lower energy counterpart, adenosine diphosphate (ADP). In this work, we examine the solution dynamics of ADP at different concentrations and record the changes thereof due to the presence of Mg 2+ ions. Relaxation and diffusion experiments were performed on a range of ADP solutions with increasing magnesium concentration. The most significant changes of both relaxation and diffusion behaviors are observed when adding Mg 2+ up to 0.5 ADP equivalent (eq), with most of the changes complete at 1 eq. Molecular dynamics simulations also show a significant structure introduced by Mg 2+ with very stable pyramidal coordination with the phosphate oxygens. A more extended structure found in the presence of Mg 2+ is consistent with the experimental slowing of diffusion and an increase in the spin-lattice relaxation rate. We do not observe direct evidence of aggregation in solution, although translational diffusion is slowed down significantly at higher concentrations (while solvent diffusion remains constant).

Modern life requires many different metal ions, which enable diverse biochemical functions. It is commonly assumed that metal ions' environmental availabilities controlled the evolution of early life. We argue that evolution can only explore the chemistry that life encounters, and fortuitous chemical interactions between metal ions and biological compounds can only be selected for if they first occur sufficiently frequently. We calculated maximal transition metal ion concentrations in the ancient ocean, determining that the amounts of biologically important transition metal ions were orders of magnitude lower than ferrous iron. Under such conditions, primitive bioligands would predominantly interact with Fe(II). While interactions with other metals in certain environments may have provided evolutionary opportunities, the biochemical capacities of Fe(II), Fe-S clusters, or the plentiful magnesium and calcium could have satisfied all functions needed by early life. Primitive organisms could have used Fe(II) exclusively for their transition metal ion requirements., Competing Interests: Competing interests statement:The authors declare no competing interest.

A self-assembly-directed thixotropic metallohydrogel (i.e., Mg-Tetrakis) of Mg(II)-metal salt and N , N , N ', N '-tetrakis(2-hydroxy-ethyl)ethylenediamine (i.e., Tetrakis) was successfully achieved. The organic chemical component N , N , N ', N '-tetrakis(2-hydroxy-ethyl)ethylenediamine was used as a low-molecular-weight gelator, and water was employed as the gel-forming solvent. The fabricated supramolecular metallohydrogel promisingly depicted viscoelastic and mechanoelastic behaviors, which are interpreted through various rheological parameters. The thixotropic behavior of the metallohydrogel is also well characterized through this rheological study. Field emission scanning electron microscopy microstructural analyses were performed to visualize the morphological arrangements of the metallohydrogel. The anticancer properties of the synthesized metallogels are investigated through this work. The cytotoxic potential of the metallohydrogel on the MCF-7 breast cancer cell line is critically examined. Reducing the growth of breast cancer cell line MCF-7 through the treatment of gel on the colony formation assay has been explored through the work. The antimigratory potential of the metallohydrogel on the MCF-7 cell was also scrutinized. The anticancer effect of the fabricated metallohydrogel is inspected through various assay formation strategies, like wound healing assay, tumor spheroid inhibition assay, nuclear fragmentation assay, and so on. Quantitative reactive oxygen species analysis of the cancer cells by treatment with the metallohydrogel was also conducted through this study. The mechanistic apoptosis study was executed by studying the expression of various apoptotic markers like BAX, BCL2, PUMA, and NOXA.

Magnesium is a combustible metal that poses various safety risks, including fires and explosions. However, there are limited safety measures available to prevent and respond to potential fires and explosion incidents in the metal industry. In this study, the combustion process of Mg fires was closely examined using infrared thermal imaging, focusing on the effects of Mg powder size. For the experiment, Mg powder was burned by increasing the temperature to approximately 967.4 K using an ignition unit and controller equipped with a tungsten heater. Moreover, combustion velocity measurement experiments for Mg particle sizes of 75, 100, and 150 μm were conducted using the combustion velocity measurement device presented in the NFPA 484 standard. On combustion of Mg, flames are observed; smoke is emitted as demonstrated by thermal and flow visualization experiments. The combustion velocity measurement experiment results demonstrated that the greater the slope value (combustion velocity) for the combustion length over time, the faster is the combustion velocity, with the 75 μm particle size having the fastest combustion velocity. The results of this experiment can be utilized as references for Mg fire control design and to gain a better understanding of the scope of smoke and fire hazard investigation measures., Competing Interests: NO authors have competing interests., (Copyright: © 2024 Nam et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Nucleoside diphosphate kinases (NDPKs) are encoded by nme genes and exist in various isoforms. Based on interactions with other proteins, they are involved in signal transduction, development and pathological processes such as tumorigenesis, metastasis and heart failure. In this study, we report a 1.25 Å resolution structure of human homohexameric NDPK-C bound to ADP and describe the yet unknown complexes formed with GDP, UDP and cAMP, all obtained at a high resolution via X-ray crystallography. Each nucleotide represents a distinct group of mono- or diphosphate purine or pyrimidine bases. We analyzed different NDPK-C nucleotide complexes in the presence and absence of Mg 2+ and explain how this ion plays an essential role in NDPKs' phosphotransferase activity. By analyzing a nucleotide-depleted NDPK-C structure, we detected conformational changes upon substrate binding and identify flexible regions in the substrate binding site. A comparison of NDPK-C with other human isoforms revealed a strong similarity in the overall composition with regard to the 3D structure, but significant differences in the charge and hydrophobicity of the isoforms' surfaces. This may play a role in isoform-specific NDPK interactions with ligands and/or important complex partners like other NDPK isoforms, as well as monomeric and heterotrimeric G proteins. Considering the recently discovered role of NDPK-C in different pathologies, these high-resolution structures thus might provide a basis for interaction studies with other proteins or small ligands, like activators or inhibitors.