Search

Tailoring the losses of optical systems within the frame of non-Hermitian physics has appeared very fruitful in the last few years. In particular, the description of exceptional points (EPs) with coupled resonators have become widespread. The on-chip realization of these functionalities is highly significant for integrated nanophotonics, but requires fine control techniques of the nanodevice properties. Here, we demonstrate pump-controlled directional emission of two coupled nanolasers that distantly interact via an integrated waveguide. This coupling scheme unusually enables both frequency- and loss-couplings between two cavities, which can be advantageously exploited to reach EPs by either detuning the cavities or controlling the gain of nanolasers. The system can be readily reconfigured from bidirectional to unidirectional emission by adjusting the pump power.

Chip-scale multimode optomechanical systems have unique benefits for sensing, metrology and quantum technologies relative to their single-mode counterparts. Slot-mode optomechanical crystals enable sideband resolution and large optomechanical couplings of a single optical cavity to two microwave-frequency mechanical modes. Still, previous implementations have been limited to nanobeam geometries, whose effective quantum cooperativity at ultralow temperatures is limited by their low thermal conductance. In this work, we design and experimentally demonstrate a two-dimensional mechanical-optical-mechanical (MOM) platform that dispersively couples a slow-light slot-guided photonic-crystal waveguide mode and two slow-sound $\sim 7$ GHz phononic wire modes localized in physically distinct regions. We first demonstrate optomechanical interactions in long waveguide sections, unveiling acoustic group velocities below 800 m/s, and then move on to mode-gap adiabatic heterostructure cavities with a tailored mechanical frequency difference. Through optomechanical spectroscopy, we demonstrate optical quality factors $Q \sim 10^5$, vacuum optomechanical coupling rates, $g_o/2\pi$, of 1.5 MHz and dynamical backaction effects beyond the single-mode picture. At larger power and adequate laser-cavity detuning, we demonstrate regenerative optomechanical oscillations involving a single mechanical mode, extending to both mechanical modes through modulation of the input laser drive at their frequency difference. This work constitutes an important advance towards engineering MOM systems with nearly degenerate mechanical modes as part of hybrid multipartite quantum systems.

Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the MHz and the GHz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in GHz phononic devices, signal processing, and optical comb sensing applications., Comment: 10 pages

Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while non-piezoelectric demonstrations have been inefficient. In this work, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation via mechanical lasing around 6.8 GHz. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties., Comment: 13 pages, 4 main text figures, 6 appendix figures

Chaos enables the emergence of randomness in deterministic physical systems. Therefore it can be exploited for the conception of true random number generators (RNG) mandatory in classical cryptography applications. Meanwhile, nanomechanical oscillators, at the core of many on-board functionalities such as sensing, reveal as excellent candidates to behave chaotically. This is made possible thanks to intrinsic mechanical nonlinearities emerging at the nanoscale. Here we present a platform gathering a nanomechanical oscillator and its integrated capacitive actuation. Using a modulation of the resonant force induced by the electrodes, we demonstrate chaotic dynamics and study how it depends on the dissipation of the system. The randomness of a binary sequence generated from a chaotic time trace is evaluated and discussed such that the generic parameters enabling successful random number generation can be established. This demonstration makes use of concepts which are sufficiently general to be applied to the next generation of nano-electro-optomechanical systems., Comment: 8 pages, 5 figures

Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications., Comment: 50 pages

Vibrational resonance amplifies a weak low-frequency signal by use of an additional non-resonant high-frequency modulation. The realization of weak signal enhancement in integrated nonlinear optical nanocavities is of great interest for nanophotonic applications where optical signals may be of low power. Here, we report experimental observation of vibrational resonance in a thermo-optically bistable photonic crystal optomechanical resonator with an amplification up to +16 dB. The characterization of the bistability can interestingly be done using a mechanical resonance of the membrane, which is submitted to a strong thermo-elastic coupling with the cavity., Comment: 10 pages, 5 figures

Cavity optomechanical systems enable fine manipulation of nanomechanical degrees of freedom with light, adding operational functionality and impacting their appeal in photonic technologies. We show that distinct mechanical modes can be exploited with a temporally modulated laser drive to steer between bistable steady states induced by changes of cavity radiation pressure. We investigate the influence of thermo-optic nonlinearity on these Floquet dynamics and find that it can inhibit or enhance the performance of the coupling mechanism in contrast to their often performance limiting character. Our results provide new techniques for the characterization of thermal properties and the control of optomechanical systems in sensing and computational applications

Synchronization and chaos are two well known and ubiquitous phenomena in nature. Interestingly, under specific conditions, coupled chaotic systems can display synchronization in some of their observables. Here, we experimentally investigate bichromatic synchronization on the route to chaos of two non-identical mechanically coupled optomechanical nanocavities. Electromechanical near-resonant excitation of one of the resonators evidences hysteretic behaviors of the coupled mechanical modes which can, under amplitude modulation, reach the chaotic regime. The observations, allowing to measure directly the full phase space of the system, are accurately modeled by coupled periodically forced Duffing resonators thanks to a complete calibration of the experimental parameters. This shows that, besides chaos transfer from the mechanical to the optical frequency domain, spatial chaos transfer between the two nonidentical subsystems occurs. Upon simultaneous excitations of the coupled membranes modes, we also demonstrate bichromatic chaos synchronization between quadratures at the two distinct carrier frequencies of the normal modes. Their respective quadrature amplitudes are consistently synchronized thanks to the modal orthogonality breaking induced by the nonlinearity. Meanwhile, their phases show complex dynamics with imperfect synchronization in the chaotic regime. Our generic model agrees again quantitatively with the observed synchronization dynamics. These results set the ground for the experimental study of yet unexplored collective dynamics of e.g synchronization in arrays of strongly coupled, nanoscale nonlinear oscillators for applications ranging from precise measurements to multispectral chaotic encryption and random bit generation, and to analog computing, to mention a few.