Search

Integrated access and backhaul (IAB) technology is a flexible solution for network densification. IAB nodes can also be deployed in moving nodes such as buses and trains, i.e., mobile IAB (mIAB). As mIAB nodes can move around the coverage area, the connection between mIAB nodes and their parent macro base stations (BSs), IAB donor, is sometimes required to change in order to keep an acceptable backhaul link, the so called topology adaptation (TA). The change from one IAB donor to another may strongly impact the system load distribution, possibly causing unsatisfactory backhaul service due to the lack of radio resources. Based on this, TA should consider both backhaul link quality and traffic load. In this work, we propose a load balancing algorithm based on TA for IAB networks, and compare it with an approach in which TA is triggered based on reference signal received power (RSRP) only. The results show that our proposed algorithm improves the passengers worst connections throughput in uplink (UL) and, more modestly, also in downlink (DL), without impairing the pedestrian quality of service (QoS) significantly., Comment: Paper submitted to Journal of Communication and Information Systems (JCIS)

As the number of user equipments increases in fifth generation (5G) and beyond, it is desired to densify the cellular network with auxiliary nodes assisting the base stations. Examples of these nodes are integrated access and backhaul (IAB) nodes, network-controlled repeaters (NCRs) and reconfigurable intelligent surfaces (RISs). In this context, this work presents a system level overview of these three nodes. Moreover, this work evaluates through simulations the impact of network planning aiming at enhancing the performance of a network used to cover an outdoor sport event. We show that, in the considered scenario, in general, IAB nodes provide an improved signal to interference-plus-noise ratio and throughput, compared to NCRs and RISs. However, there are situations where NCR outperforms IAB due to higher level of interference caused by the latter. Finally, we show that the deployment of these nodes in unmanned aerial vehicles (UAVs) also achieves performance gains due to their aerial mobility. However, UAV constraints related to aerial deployment may prevent these nodes from reaching results as good as the ones achieved by their stationary deployment., Comment: Paper submitted to IEEE Systems Journal

To address the need of coverage enhancement in the fifth generation (5G) of wireless cellular telecommunications, while taking into account possible bottlenecks related to deploying fiber based backhaul (e.g., required cost and time), the 3rd generation partnership project (3GPP) proposed in Release 18 the concept of network-controlled repeaters (NCRs). NCRs enhance previous radio frequency (RF) repeaters by exploring beamforming transmissions controlled by the network through side control information. In this context, this paper introduces the concept of NCR. Furthermore, we present a system level model that allows the performance evaluation of an NCR-assisted network. Finally, we evaluate the network deployment impact on the performance of NCR-assisted networks. As we show, with proper network planning, NCRs can boost the signal to interference-plus-noise ratio (SINR) of the user equipments (UEs) in a poor coverage of a macro base station. Furthermore, celledge UEs and uplink (UL) communications are the ones that benefit the most from the presence of NCRs., Comment: Paper accepted for publication in the conference proceedings of "19th International Symposium on Wireless Communication Systems" (ISWCS)

In fifth generation (5G) wireless cellular networks, millimeter wave spectrum opens room for several potential improvements in throughput, reliability, latency, among other aspects. However, it also brings challenges, such as a higher influence of blockage which may significantly limit the coverage. In this context, network-controlled repeaters (NCRs) are network nodes with low complexity that represent a technique to overcome coverage problems. In this paper, we introduce the NCR concept and study its performance gains and deployment options. Particularly, presenting the main specifications of NCR as agreed in 3rd generation partnership project (3GPP) Rel-18, we analyze different NCR deployments in an urban scenario and compare its performance with alternative deployments. As demonstrated, with a proper network planning and beamforming design, NCR is an attractive solution to cover blind spots the base stations (BSs) may have., Comment: Submmited to IEEE Communications Standards Magazine

Millimeter wave (mmWave) and sub-THz communications, foreseen for sixth generation (6G), suffer from high propagation losses which affect the network coverage. To address this point, smart entities such as network-controlled repeaters (NCRs) have been considered as cost-efficient solutions for coverage extension. NCRs, which have been standardized in 3rd generation partnership project Release 18, are radio frequency repeaters with beamforming capability controlled by the network through side control information. Another challenge raised by the adoption of high frequency bands is the use of large bandwidths. Here, a common configuration is to divide a large frequency band into multiple smaller subbands. In this context, we consider a scenario with NCRs where signaling related to measurements used for radio resource management is transmitted in one subband centered at frequency $f_c$ and data transmission is performed at a different frequency $f_c + \Delta f$ based on the measurements taken at $f_c$. Here, a challenge is that the array radiation pattern can be frequency dependent and, therefore, lead to beam misalignment, called beam squinting. We characterize beam squinting in the context of subband operation and propose a solution where the beam patterns to be employed at a given subband can be adjusted/compensated to mitigate beam squinting. Our results show that, without compensation, the perceived signal to interference-plus-noise ratio (SINR) and so the throughput can be substantially decreased due to beam squinting. However, with our proposed compensation method, the system is able to support NCR subband signaling operation with similar performance as if signaling and data were transmitted at the same frequency., Comment: Submitted to IEEE Transactions on Vehicular Technology

This work investigates interference mitigation techniques in multi-user multiple input multiple output (MU-MIMO) Intelligent Reflecting Surface (IRS)-aided networks, focusing on the base station end. Two methods of precoder design based on block diagonalization are proposed. The first method does not consider the interference caused by the IRS, seeking to mitigate only the multi-user interference. The second method mitigates both the IRS-caused interference and the multi-user interference. A comparison between both methods within an no-IRS MU-MIMO network with strong direct links is provided. The results show that, although in some circumstances IRS interference can be neglected, treating it can improve system capacity and provide higher spectral efficiency, Comment: 5 pages, 4 figures, submitted to XLI BRAZILIAN SYMPOSIUM ON TELECOMMUNICATIONS AND SIGNAL PROCESSING - SBrT 2023

Heterogeneous networks have been studied as one of the enablers of network densification. These studies have been intensified to overcome some drawbacks related to propagation in millimeter waves (mmWaves), such as severe path and penetration losses. One of the promising heterogeneous nodes is network-controlled repeater (NCR). It was proposed by the 3rd generation partnership project (3GPP) in Release 18 as a candidate solution to enhance network coverage. In this context, this work performs a system level evaluation to analyze the performance improvement that an NCR can cause in its serving cell as well as its interference impact on neighbor cells. Particularly, the results show a considerable improvement on the performance of user equipments (UEs) served by the NCR, while neighbor UEs that receive the NCR signal as interference are negatively impacted, but not enough to suffer from outage., Comment: Submitted to XLI Brazilian Symposium on Telecommunications and Signal Processing (SBrT)

Deploying access and backhaul as wireless links, a.k.a. integrated access and backhaul (IAB), is envisioned as a viable approach to enable flexible and dense networks. Even further, mobile IAB (mIAB) is a candidate solution to enhance the connectivity of user equipments (UEs) moving together. In this context, different of other works from the literature, the present work overviews the basis for the deployment of mIAB by presenting: 1) the current status of IAB standardization in the fifth generation (5G) new radio (NR); 2) a new taxonomy for state-of-the-art works regarding fixed IAB and mIAB; 3) an extensive performance analysis of mIAB based on simulation results; and 4) open challenges and potential future prospects of mIAB. Specifically, the proposed taxonomy classifies IAB works according to different perspectives and categorizes mIAB works according to the type of mobility. For each type of mobility, the main studied topics are presented. Regarding the performance evaluation, we consider an urban macro scenario where mIAB nodes are deployed in buses in order to improve the passengers connection. The results show that, compared to other network architectures, the deployment of mIAB nodes remarkably improves the passengers throughput and latency in both downlink and uplink., Comment: Submitted to "IEEE Access"

Fifth generation cellular systems support a broad range of services, including mobile broadband, critical and massive Internet of Things and are used in a variety of scenarios. In many of these scenarios, the main challenge is maintaining high throughput and ensuring proper quality of service (QoS) in irregular topologies. In multiple input multiple output systems, this challenge translates to designing linear transmit and receive beamformers that maximize the system throughput and manage QoS constraints. In this paper, we argue that this basic design task in 5G and beyond systems must be extended such that beamforming design and user scheduling are managed jointly. Specifically, we propose a fully decentralized joint beamforming design and user scheduling algorithm that manages QoS. A novel feature of this scheme is its ability to reduce the initial rate requirements in case of infeasibility. By means of simulations that model contemporary 5G scenarios, we show that the proposed decentralized scheme outperforms benchmarking algorithms that do not support minimum rate requirements and previously proposed algorithms that support QoS requirements., Comment: Accepted at IEEE Communications Standards Magazine

In this article, we study a Radio Resource Allocation (RRA) that was formulated as a non-convex optimization problem whose main aim is to maximize the spectral efficiency subject to satisfaction guarantees in multiservice wireless systems. This problem has already been previously investigated in the literature and efficient heuristics have been proposed. However, in order to assess the performance of Machine Learning (ML) algorithms when solving optimization problems in the context of RRA, we revisit that problem and propose a solution based on a Reinforcement Learning (RL) framework. Specifically, a distributed optimization method based on multi-agent deep RL is developed, where each agent makes its decisions to find a policy by interacting with the local environment, until reaching convergence. Thus, this article focuses on an application of RL and our main proposal consists in a new deep RL based approach to jointly deal with RRA, satisfaction guarantees and Quality of Service (QoS) constraints in multiservice celular networks. Lastly, through computational simulations we compare the state-of-art solutions of the literature with our proposal and we show a near optimal performance of the latter in terms of throughput and outage rate., Comment: Submitted to "Journal of Communication and Information System"

Network-assisted single-hop device-to-device (D2D) communication can increase the spectral and energy efficiency of cellular networks by taking advantage of the proximity, reuse, and hop gains when radio resources are properly managed between the cellular and D2D layers. In this paper we argue that D2D technology can be used to further increase the spectral and energy efficiency if the key D2D radio resource management algorithms are suitably extended to support network assisted multi-hop D2D communications. Specifically, we propose a novel, distributed utility maximizing D2D power control (PC) scheme that is able to balance spectral and energy efficiency while taking into account mode selection and resource allocation constraints that are important in the integrated cellular-D2D environment. Our analysis and numerical results indicate that multi-hop D2D communications combined with the proposed PC scheme can be useful not only for harvesting the potential gains previously identified in the literature, but also for extending the coverage of cellular networks., Comment: 6 pages and 7 figures