Search

The current investigation focuses on the effect of different concentrations of green coffee bean powder (GCBp) on the physicochemical, microbiological, and sensory characteristics of whole wheat bread (WWB). C1 bread formulation (containing 1% GCBp) exhibited the highest loaf volume, suggesting optimal fermentation. Moisture analysis revealed minor alterations in the moisture retention attributes of the bread formulations. Impedance analysis suggested that C1 exhibited the highest impedance with a high degree of material homogeneity. Swelling studies suggested similar swelling properties, except C5 (containing 5% GCBp), which showed the lowest swelling percentage. Furthermore, color and microcolor analysis revealed the highest L* and WI in C1. Conversely, higher concentrations of GCBp reduced the color attributes in other GCBp-containing formulations. FTIR study demonstrated an improved intermolecular interaction in C1 and C2 (containing 2% GCBp) among all. No significant variation in the overall textural parameters was observed in GCBp-introduced formulations, except C2, which showed an improved gumminess. Moreover, the TPC (total phenolic content) and microbial analysis revealed enhanced antioxidant and antimicrobial properties in GCBp-incorporated formulations compared to Control (C0, without GCBp). The sensory evaluation showed an enhanced appearance and aroma in C1 compared to others. In short, C1 showed better physicochemical, biological, and sensory properties than the other formulations.

Oleogels, which are traditionally utilized to reduce saturated and trans fats in bakery foods, have recently shown promising applications in non-bakery foods, particularly in the enhancement of their food texture and cooking qualities. This study investigates the impact of incorporating stearic acid-containing candelilla wax–groundnut oil oleogel in various proportions on the production of whole wheat pasta. Five different pasta samples were prepared by replacing water with oleogels in varying concentrations (2.5%, 5%, 10%, and 15%), and their physicochemical attributes were evaluated using a range of analytical methods for both cooked and uncooked pasta (like microscopy, colorimetry, dimensional analysis, texture, cooking qualities, moisture content, and FTIR). Significant differences in width, thickness, and color properties were observed between the control sample (0% oleogel) and those containing oleogel, with notable variations in surface texture and color intensities, particularly with the higher oleogel content (p < 0.05). Cooked pasta exhibited lower L* values and higher a* values than uncooked pasta. Stereo zoom microscope and field emission scanning electron microscope (FESEM) micrographs demonstrated a change in the pasta surface topology and microstructures. Dark spots on the pasta with greater oleogel concentrations (samples with 10% and 15% oleogel replacement) suggest the formation of starch–lipid complexes. Cooking induced pore formation, which was more pronounced when the oleogel content was increased, impacted the water absorption capacity, swelling index, and moisture content. The cooked samples exhibited higher moisture content and improved polymer network stability compared to the uncooked ones, indicating the potential of oleogel incorporation to modulate pasta properties in a concentration-dependent manner. These findings underscore the versatility of oleogels when their applications are diversified in non-bakery foods to enhance food texture and quality.

The shelf life of whole wheat bread (WWB) significantly impacts its freshness and overall quality. This research investigated the impact of chitosan lactate (CL) on various characteristics influencing the shelf life of WWB, including its physical, chemical, textural, antimicrobial, and sensory attributes. These characteristics were evaluated by conducting various experiments such as physical inspection, moisture, impedance, swelling, color, texture, FTIR, microbiological, and sensory analysis. CL with different concentrations was incorporated into WWB formulations: P0.0 (0.0% w/w CL, control), P0.5 (0.5% w/w CL), P1.0 (1.0% w/w CL), P2.0 (2.0% w/w CL), and P3.0 (3.0% w/w CL). The inclusion of CL promoted the Maillard reaction (MR) compared to P0.0. The promotion of MR resulted in the formation of a shinier crust, which increased as the CL content was increased. P0.5 comprised large-sized pores and exhibited increased loaf height. CL-containing WWB formulations showed an increased moisture content and decreased impedance values compared to the control. FTIR analysis of P0.5 demonstrated the enhanced interaction and bonding of water molecules. P0.5 demonstrated optimal textural, colorimetric, and antimicrobial properties compared to other formulations. The sensory attributes of WWBs remain unchanged despite CL addition. In conclusion, P0.5 exhibited optimal characteristics associated with better quality and prolonged shelf life.

A significant amount of logging residue is produced during roundwood harvesting. Logs are often left in forest sites due to, for example, ecological or logistical aspects. Taking into account the fact that the number of studies focused on changes in the properties of the residue is very low, it was decided to conduct research on the effect of a three-year storage period in forest stands on the chemical properties and energy potential of the wood. The research design allowed for the determination of changes during up to three years of storage. The performed analysis showed a highly negative impact on the characteristics of the material. These adverse effects were probably caused by the activity of microorganisms such as fungi and bacteria, as evidenced by the increased concentrations of ergosterol and low-molecular-weight organic acids. Moreover, it was found that wood stored for three years was characterized by a lower cellulose content; an increased percentage of lignin; a reduced content of sterols (desmosterol, stigmasterol, lanosterol and β-sitosterol) and phenolic acids; and reduced antioxidant activity, as determined with the ABTS+ method. Storing logs also led to a reduction in the energy potential of the residues, as shown by a reduction in net and gross calorific value and an increased ash content.

This study investigated the effects of incorporating stearic acid (SAC) in candelilla wax (CW) and groundnut oil (GO) oleogel with potential health benefits as an alternative to saturated fats in processed foods. Results showed that SAC possesses crystal habit-modifying properties on the oleogels, causing its average crystallite size to increase, as observed through polarized light microscopy and XRD analysis. Additionally, SAC caused an increase in ordering within the crystallite network as a result of the decrease in d-spacing. Interestingly, the firmness of the oleogels remained unaffected, even at a higher fraction of SAC. It is believed to be due to the interference caused by the crystallization of high-melting SAC within the fine crystal network of CW-GO oleogel. However, adding 3 mg of SAC significantly increased the work of the shear of the oleogel (SAC3), which decreased the spreadability. As observed through colorimetric analysis, SAC3 showed a dense and uniform distribution of prominent bright crystals with minimal amorphous regions, leading to a high whiteness index. SAC3 also demonstrated the highest compactness and dislocation density among the oleogels, likely due to the formation of prominent crystals. However, SAC did not affect the overall oleogel crystallization rate. SAC3 had delayed secondary crystallization and thermal equilibrium by having a prolonged crystallization time of CW crystals. In the case of controlled delivery studies, the addition of SAC improved CPCR. On the other hand, CPCR decreased with the increase in SAC amount, where SAC3 showed a moderate curcumin release ability among the oleogels.

Heart rate variability (HRV) has emerged as an essential non-invasive tool for understanding cardiac autonomic function over the last few decades. This can be attributed to the direct connection between the heart’s rhythm and the activity of the sympathetic and parasympathetic nervous systems. The cost-effectiveness and ease with which one may obtain HRV data also make it an exciting and potential clinical tool for evaluating and identifying various health impairments. This article comprehensively describes a range of signal decomposition techniques and time-series modeling methods recently used in HRV analyses apart from the conventional HRV generation and feature extraction methods. Various weight-based feature selection approaches and dimensionality reduction techniques are summarized to assess the relevance of each HRV feature vector. The popular machine learning-based HRV feature classification techniques are also described. Some notable clinical applications of HRV analyses, like the detection of diabetes, sleep apnea, myocardial infarction, cardiac arrhythmia, hypertension, renal failure, psychiatric disorders, ANS Activity of Patients Undergoing Weaning from Mechanical Ventilation, and monitoring of fetal distress and neonatal critical care, are discussed. The latest research on the effect of external stimuli (like consuming alcohol) on autonomic nervous system (ANS) activity using HRV analyses is also summarized. The HRV analysis approaches summarized in our article can help future researchers to dive deep into their potential diagnostic applications.

The objective of this study was to extract the rapeseed protein from by-products and further examine the effect of lab-made rapeseed protein on the droplet size, microstructure, colour, encapsulation and apparent viscosity of emulsions. Rapeseed protein-stabilised emulsions with an increasing gradient of milk fat or rapeseed oil (10, 20, 30, 40 and 50%, v/v) were fabricated using a high shear rate homogenisation. All emulsions showed 100% oil encapsulation for 30 days of storage, irrespective of lipid type and the concentration used. Rapeseed oil emulsions were stable against coalescence, whereas the milk fat emulsion showed a partial micro-coalescence. The apparent viscosity of emulsions raised with increased lipid concentrations. Each of the emulsions showed a shear thinning behaviour, a typical behaviour of non-Newtonian fluids. The average droplet size was raised in milk fat and rapeseed oil emulsions when the concentration of lipids increased. A simple approach to manufacturing stable emulsions offers a feasible hint to convert protein-rich by-products into a valuable carrier of saturated or unsaturated lipids for the design of foods with a targeted lipid profile.

The effect of horror sound on electro-cardiac activity is not yet sufficiently explored despite recommendable research on different genres of music and sound. Detecting the impact of these stimuli is a complex task. The current study intends to automatically detect the horror-sound induced cardiac changes using wavelet coefficient-based features extracted from the electrocardiograph signals and several machine learning models. The statistical comparison of these features in the two data groups suggests a significant change in different feature values after exposure to horror sound while watching a horror clip. The statistically discriminative features were employed as input to nine machine learning (ML) models, namely Naïve Bayes, Fast large margin, Logistic regression, generalized linear model, Decision tree, Random Forest, deep learning, gradient boosted tree, and Support vector machine. The performance of these ML models was compared using different performance measures, including accuracy, precision, F-measure, sensitivity, specificity, and area under the curve (AUC). The results suggest the gradient boosted tree is the best performing model in differentiating the horror sound-induced changes in the ECG signals.

Nowadays, due to a higher resistance to drugs, antibiotics, and antiviral medicaments, new ways of fighting pathogens are intensively studied. The alternatives for synthesized compositions are natural products, most of which have been known in natural medicine for a long time. One of the best-known and intensively investigated groups are essential oils (EOs) and their compositions. However, it is worth noting that the method of application can play a second crucial part in the effectiveness of the antimicrobial activity. EOs possess various natural compounds which exhibit antimicrobial activity. One of the compositions which is based on the five main ingredients of eucalyptus, cinnamon, clove, rosemary, and lemon is named “five thieves’ oil” (Polish name: olejek pięciu złodziei) (5TO) and is used in natural medicine. In this study, we focused on the droplet size distribution of 5TO during the nebulization process, evaluated by the microscopic droplet size analysis (MDSA) method. Furthermore, viscosity studies, as well as UV-Vis of the 5TO suspensions in medical solvents such as physiological salt and hyaluronic acid, were presented, along with measurements of refractive index, turbidity, pH, contact angle, and surface tension. Additional studies on the biological activity of 5TO solutions were made on the P. aeruginosa strain NFT3. This study opens a way for the possible use of 5TO solutions or emulsion systems for active antimicrobial applications, i.e., for surface spraying.

Flaxseed proteins exhibit functionalities interesting for the food industry, including antioxidant capacity. Antioxidant activity depends on the protein composition and the presence of phenolic compounds extracted with them from the matrix. The research focused on the effect of subsequent protein extractions (water, salt and alkaline) of flaxseed meals (of three cultivars) on the protein fraction composition and its relations to antioxidant capacity. The protein and phenolic profiles and antioxidant functionalities (in antiradical ORAC and emulsion assays) were analysed. Spectroscopic characteristics of the fractions (fluorometric and FT-IR analysis) were also included. Our study has shown the effect of fractionation on the share of proteins at MW from 56–38 kDa (globulin-like) and p-coumaric and ferulic) were extracted with flaxseed proteins. Their contents were fraction-dependent and the highest in AEF. The concentration of phenolics in AEF corresponded with the highest antiradical capacity (ORAC) compared with the other fractions. However, the SEF showed a higher ability to inhibit oxidation in emulsions than AEF, which could be associated with the higher content of the low MW proteins.

Radiation is an example of one of the techniques used for pasteurization and sterilization in various packaging systems. There is a high demand for the evaluation of the possible degradation of new composites, especially based on natural raw materials. The results of experimental research that evaluated the impact of radiation technology on biodegradable and compostable packaging materials up to 40 kGy have been presented. Two commercially available flexible composite films based on aliphatic–aromatic copolyesters (AA) were selected for the study, including one film with chitosan and starch (AA-CH-S) and the other with thermoplastic starch (AA-S). The materials were subjected to the influence of ionizing radiation from 10 to 40 kGy and then tests were carried out to check their usability as packaging material for the food industry. The results showed that the mechanical properties of AA-S films improved due to the radiation-induced cross-linking processes, while in the case of AA-CH-S films, a considerable decrease in the elongation at break was observed. The results also showed a decrease in the WVTR in the case of AA-S and no changes in barrier properties in the case of AA-CH-S. Both materials revealed no changes in the odor analyzed by sensory analysis. In the case of the AA-S films, the higher the radiation dose, the faster the biodegradation rate. In the case of the AA-CH-S film, the radiation did not affect biodegradation. The performed research enables the evaluation of the materials intended for direct contact with food. AA-CH-S was associated with unsatisfactory parameters (exceeding the overall migration limit and revealing color change during storage) while AA-S showed compliance at the level of tests carried out. The study showed that the AA-CH-S composite did not show a synergistic effect due to the presence of chitosan.

Scientists are concerned about the health risks associated with consuming a diet high in saturated fats. In this regard, oleogels have been used as a shortening substitute by researchers. This present study evaluated the role of stearyl alcohol (SA)-, and Span-60 (SP)-tailored sunflower wax/sunflower oil oleogels upon butter replacement in whole wheat batter and cake. The evaluation of the cake batter under PLM microscopy revealed that a complete replacement of butter with SA-containing oleogels, i.e., Sa-C, showed homogenously distributed smaller gas cells. A uniform distribution of gas cells assists in stabilization and contributes to the porosity of the cake. The DSC and FTIR studies confirmed the prominent melting of amylose-lipid complexes in batter Sa-C. The baked cake Sa-C showed the existence of large pores in the cake matrix, which may have assisted in softening the cake. Further, low starch–lipid interactions were also observed in the FTIR spectra of Sa-C cake crumbs. The SR studies of cake crumbs revealed a higher stress-relaxing ability in Sa-C from the control. Although there were no observed variations in the cake hardness values, Sa-C showed a reduction in the chewiness from the control. This current study suggests the possibility of using emulsifier-tailored oleogels as a potential substitute for butter in the baking formulation.

Developments in the field of nanostructures open new ways for designing and manufacturing innovative materials. Here, we focused on new original ways of calculating energy changes during the substitution of foreign ions into the structure of apatites and bioapatites. Using these tools, the energetic costs of ion exchanges were calculated for the exemplary cases known from the literature. It was established that the most costly were ion exchanges of some cations inside apatites and of anions, and the least costly exchanges in tetrad channel positions. Real energy expenses for bioapatites are much smaller in comparison to mineral apatites due to the limited involvement of magnesium and carbonates in the structure of hard tissues. They are of the order of several electron volts per ion. The rigorous dependences of the energy changes and crystallographic cell volumes on the ionic radii of introduced cations were proved. The differentiation of the positioning of foreign ions in locations of Ca(I) and Ca(II) could be calculated in the case of a Ca-Pb reaction in hydroxyapatite. The energetic effects of tooth aging were indicated. The ability of energy change calculation during the ion exchange for isomorphic substances widens the advantages resulting from X-ray diffraction measurements.

Early detection of the dysfunction of the cardiac autonomic regulation (CAR) may help in reducing cannabis-related cardiovascular morbidities. The current study examined the occurrence of changes in the CAR activity that is associated with the consumption of bhang, a cannabis-based product. For this purpose, the heart rate variability (HRV) signals of 200 Indian male volunteers, who were categorized into cannabis consumers and non-consumers, were decomposed by Empirical Mode Decomposition (EMD), Discrete Wavelet transform (DWT), and Wavelet Packet Decomposition (WPD) at different levels. The entropy-based parameters were computed from all the decomposed signals. The statistical significance of the parameters was examined using the Mann–Whitney test and t-test. The results revealed a significant variation in the HRV signals among the two groups. Herein, we proposed the development of machine learning (ML) models for the automatic classification of cannabis consumers and non-consumers. The selection of suitable input parameters for the ML models was performed by employing weight-based parameter ranking and dimension reduction methods. The performance indices of the ML models were compared. The results recommended the Naïve Bayes (NB) model developed from WPD processing (level 8, db02 mother wavelet) of the HRV signals as the most suitable ML model for automatic identification of cannabis users.

The bark of Frangula alnus Mill (FAM), the so-called alder buckthorn, has been widely investigated for its medicinal properties, especially its laxative effects and the bioactive properties of the plant material extract. Still, there is no wider study devoted to its antibacterial properties. This is important in the context of its impact on probiotic gut bacteria. The aim of the research was to recognize the effect of FAM extract on bacterial cells, and to determine how the bioactive properties and composition of the extract are influenced by the type of solvent used for the extraction. To find the most suitable conditions for the FAM extraction, we used four solvent solutions with different polarities, including water, methanol, ethanol, and isopropanol. We assessed the quality and composition of the extracts with spectral analysis, using spectrophotometric (FTIR, UV-Vis) and chromatographic methods (GC-MS). Finally, we analyzed the extractant impact of the extracts on the selected bacterial cells. The results showed that the chemical diversity of the extracts increased with the increase in solvent polarity, in which the abundance of frangulin, the main bioactive compound in buckthorn bark, was confirmed. Pseudomonas fluorescens ATCC 17400 was particularly sensitive to the action of extracts, whereas other strains of the Pseudomonas genus showed practically no adverse effects. Ethanolic extracts had the strongest effect on most of the selected bacteria strains. We found that the probiotic Lactobacillus strain, which represents intestinal microflora, has no direct effect on probiotic microorganisms. The research shown FAM extracts can be safe for probiotic bacteria present in human gut microflora. Moreover, the study indicated that contact with the extracts may reduce the total permeability of the bacterial membranes. This opens up the possibility of using FAM extracts as a factor regulating transport into cells, which may be used to support the action of other bioactive substances.

Emerging natural-based polymers and materials progress and new technology innovations open the way for unique food products with high nutritional value development. In this regard, oleogel may be essential in replacing fatty acids from food products. In this study, we researched the effects of varied soy lecithin (SYL) concentrations on the various physicochemical characteristics of soy wax (SW)/refined soybean oil (RSO) oleogels. These oleogels had a soft texture. The microscopic analysis of the oleogels suggested that the thickness, length, and density of the wax crystals (needle-shaped) varied as the SYL content was changed. Colorimetric analysis indicated that the oleogels were slightly yellowish. FTIR spectrometry helped analyze the functional groups of the raw materials and the oleogels. All the functional groups present in the raw materials could be accounted for within the oleogels. The only exception is the hydrogen-bonding peak in SW, which was not seen in the FTIR spectrum of the oleogels. It was found that at a critical SYL content, the oleogel showed a stable and repeatable wax network structure. This can be described by the presence of the uniformly distributed fat crystal network in the sample. The DSC analysis revealed that the oleogel samples were thermo-reversible, with their melting and crystallization temperatures ~43 °C and ~22 °C, respectively. In gist, it can be concluded that the incorporation of SYL can impact the color, wax crystal network characteristics, thermal characteristics, and mechanical characteristics of the oleogels in a composition-dependent manner.

The current study aims to evaluate the effect of tamarind gum (TG) on the optical, mechanical, and drug release potential of poly(vinyl alcohol) (PVA)-based films. This involves preparing PVA-TG composite films with different concentrations of TG through a simple solvent casting method. The addition of TG has enhanced the phase separation and aggregation of PVA within the films, and it becomes greater with the increase in TG concentration. Brightfield and polarized light micrographs have revealed that aggregation is favored by forming crystalline domains at the PVA-TG interface. The interconnected network of PVA-TG aggregates influenced the swelling and drying properties of the films. Using Peleg’s analysis, the mechanical behavior of films was determined by their stress relaxation profiles. The addition of TG has made no significant changes to the firmness and viscoelastic properties of films. However, long-durational relaxation times indicated that the interconnected network might break down in films with higher TG concentration, suggesting their brittleness. The controlled release of ciprofloxacin in HCl solution (0.5% (w/v)) appears to decrease with the increase in TG concentration. In fact, TG has inversely affected the impedance and altered the ionic conductivity within the films. This seems to have directly influenced the drug release from the films as the mechanism was found to be non-Fickian diffusion (based on Korsmeyer–Peepas and Peppas–Sahlin kinetic models). The antimicrobial study using Escherichia coli was carried out to evaluate the activity of the drug-loaded films. The study proves that TG can modulate the properties of PVA films and has the potential to fine-tune the controlled release of drugs from composite films.

The current study deciphers the processing of different proportions of white flour and whole wheat flour (100:0, 75:25, 50:50: 25:75, and 0:100) into a pizza base using yeast-based fermentation. The bread making using the yeast system resulted in significant changes in the characteristics of bread, ranging from the porous structure development to the crumb cellular structure modifications. An increase in the proportions of whole wheat flour resulted in the formation of golden yellow pizza bases. The lightness of the crust was decreased, whereas the yellowness index was increased as the whole wheat flour contents were increased. The pore size of the pizza base was decreased while the pore density was increased as the whole wheat flour content was raised within the bread. The microscopic study also showed the formation of porous structures on the bulk of the pizza base. The texture analysis of the bread also suggested an increase in the formation of the rigid network structure when the amount of whole wheat flour was increased. The springiness, cohesiveness, and resilience were comparable for all the prepared samples. On the other hand, the values for hardness, gumminess, and chewiness showed an increasing trend with the increase in the whole wheat flour content. The impedance of the samples decreased when there was an increase in the whole wheat flour content. Overall, the pizza base that was developed with 50% whole wheat flour and 50% white flour ratio displayed acceptably firm yet sufficient viscoelastic properties for human consumption.

Fluorescent particles are of particular interest as probes and active agents for biomedical, pharmaceutical, and food applications. Here, we present two strategies for incorporation of core-shell acrylic fluorescent nanoparticles (NPs) with Rhodamine B (RhB) as a dye into a chitosan (CS) matrix. We selected two variants of NPsRhB immobilisation in a CS membrane and biopolymeric CS beads. Modification of the method for production of the biopolymer cover/transporter of nanoparticles allowed two series of hydrogels loaded with nanoparticles to be obtained with a similar concentration of the aqueous solution of the nanoparticles. Microscopic analysis showed that the NPs were nonuniformly distributed in millimetre-sized CS beads, as well as membranes, but the fluorescence signal was strong. The composition of CS layers loaded with nanoparticles (CS/NPsRhB) showed water vapour barrier properties, characterised by the contact angle of 71.8°. Finally, we incorporated NPsRhBCS beads into a gelatine matrix to check their stability. The results confirmed good stability of the NPsRhBCS complex system, and no dye leakage was observed from the beads and the membranes. The proposed complex system demonstrated promising potential for further use in bioimaging and, thus, for the development of advanced diagnostic tools.

This study aimed to determine the use of selected vegetables (pumpkin, cauliflower, broccoli, carrot) as carriers of potassium iodide (KI) and potassium iodate (KIO3) by determining changes in iodine content under various conditions of impregnation as the degree of hydration, impregnated sample temperature, and impregnation time. The influence of these conditions on iodine contents in vegetables after their fortification and storage (21 °C/230 days) was analyzed. The results showed that all selected vegetables could be efficient iodine carriers. However, the conditions of the impregnation process are crucial for fortification efficiency, particularly the degree of hydration and the temperature of the impregnated samples before drying. The results showed that the lowest iodine content was in samples fortified at 4 °C and 1:4 hydration. On the other hand, the highest reproducibility of iodine was for the following fortification conditions: temperature of −76 °C and hydration of 1:1. The studies confirmed the higher stability of iodine in KIO3 form compared to KI. To increase recovery of the introduced iodine in the product after drying, using the conditioning step at 4 °C is not recommended. We recommend freezing vegetables immediately after the impregnation process

β-Carotene (vitamin A precursor) and α-tocopherol, the utmost energetic form of vitamin E (VE), are known to be fat-soluble vitamins (FSVs) and essential nutrients needed to enhance the growth and metabolic functions of the human body. Their deficiencies are linked to numerous chronic disorders. Loading of FSVs within nanoemulsions could increase their oxidative stability and solubility. In this research, VE and β-Carotene (BC) were successfully co-entrapped within oil-in-water nanoemulsions of carrier oils, including tuna fish oil (TFO) and medium-chain triglycerides (MCTs), stabilized by modified starch and Tween-80. These nanoemulsions and free carrier oils loaded with vitamins were stored for over one month to investigate the impact of storage circumstances on their physiochemical characteristics. Entrapped bioactive compounds inside the nanoemulsions and bare oil systems showed a diverse behavior in terms of oxidation. A more deficiency of FSVs was found at higher temperatures that were more noticeable in the case of BC. VE behaved like an antioxidant to protect BC in MCT-based nanoemulsions, whereas it could not protect BC perfectly inside the TFO-loaded nanoemulsions. However, cinnamaldehyde (CIN) loading significantly enhanced the oxidative stability and FSVs retention in each nanoemulsion. Purity gum ultra (PGU)-based nanoemulsions comprising FSVs and CIN presented a greater BC retention (42.3%) and VE retention (90.1%) over one-month storage at 40 °C than Twee 80. The superior stability of PGU is accredited to the OSA-MS capabilities to produce denser interfacial coatings that can protect the entrapped compounds from the aqueous phase. This study delivers valuable evidence about the simultaneous loading of lipophilic bioactive compounds to enrich functional foods.

Hemp (Cannabis sativa L.) is a herbaceous anemophilous plant that belongs to the Cannabinaceae family. The cannabis seed (hemp) has long been utilized as a food source and is commercially important as an edible oil source. In this review, the positive and negative health effects of cannabis, the relationship between cannabis and various diseases, and the use of cannabis in various food products have been discussed. In addition, the scientific literature on the potential use of cannabis and its derivatives as a dietary supplement for the prevention and treatment of inflammatory and chronic degenerative diseases in animals and humans has been reviewed. Cannabis is being developed as a key ingredient in a variety of food items, including bakery, confectionery, beverages, dairy, fruits, vegetables, and meat. Hemp seeds are high in readily digestible proteins, lipids, polyunsaturated fatty acids (PUFA), insoluble fiber, carbs, and favorable omega-6 PUFA acid to omega-3 PUFA ratio and have high nutritional value. The antioxidants of cannabis, such as polyphenols, help with anxiety, oxidative stress, and the risk of chronic illnesses, including cancer, neurological disorders, digestive problems, and skin diseases. Cannabis has been shown to have negative health impacts on the respiratory system, driving, and psychomotor functions, and the reproductive system. Overall, the purpose of this research is to stimulate more in-depth research on cannabis’s adaptation in various foods and for the treatment of chronic illnesses.

The article presents a review of the literature on the use of polysaccharide bionanocomposites in the context of their potential use as food packaging materials. Composites of this type consist of at least two phases, of which the outer phase is a polysaccharide, and the inner phase (dispersed phase) is an enhancing agent with a particle size of 1–100 nm in at least one dimension. The literature review was carried out using data from the Web of Science database using VosViewer, free software for scientometric analysis. Source analysis concluded that polysaccharides such as chitosan, cellulose, and starch are widely used in food packaging applications, as are reinforcing agents such as silver nanoparticles and cellulose nanostructures (e.g., cellulose nanocrystals and nanocellulose). The addition of reinforcing agents improves the thermal and mechanical stability of the polysaccharide films and nanocomposites. Here we highlighted the nanocomposites containing silver nanoparticles, which exhibited antimicrobial properties. Finally, it can be concluded that polysaccharide-based nanocomposites have sufficient properties to be tested as food packaging materials in a wide spectrum of applications.

The use of natural surfactants including plant extracts, plant hydrocolloids and proteins in nanoemulsion systems has received commercial interest due to demonstrated safety of use and potential health benefits of plant products. In this study, a whey protein isolate (WPI) from a byproduct of cheese production was used to stabilize a nanoemulsion formulation that contained hempseed oil and the Aesculus hippocastanum L. extract (AHE). A Box–Behnken experimental design was used to set the formulation criteria and the optimal nanoemulsion conditions, used subsequently in follow-up experiments that measured specifically emulsion droplet size distribution, stability tests and visual quality. Regression analysis showed that the concentration of HSO and the interaction between HSO and the WPI were the most significant factors affecting the emulsion polydispersity index and droplet size (nm) (p < 0.05). Rheological tests, Fourier transform infrared spectroscopy (FTIR) analysis and L*a*b* color parameters were also taken to characterize the physicochemical properties of the emulsions. Emulsion systems with a higher concentration of the AHE had a potential metabolic activity up to 84% in a microbiological assay. It can be concluded from our results that the nanoemulsion system described herein is a safe and stable formulation with potential biological activity and health benefits that complement its use in the food industry.

New types of biological apatites have been discovered in molar sheep and horse teeth and are divided in two types. In the first and more general type, the release of Mg ions is parallel to the changes in composition of apatite leading to a final stoichiometric ratio of Ca to P ions, going from dentin depth towards the boundary of enamel with air. Inside dentin, another apatite sub-types were discovered with alternating layers of Mg-rich and C-rich apatites. The approximate formal stoichiometric relationships for these peculiar types of bioapatites are suggested. We identified two kinds of ion-exchanges responsible for formation of peculiar apatites. Various combinations of main and minor elements lead to new versions of biological apatites.

Plant-based protein sources have a characteristic aroma that limits their usage in various meat-alternative formulations. Despite being the most popular plant-based protein, the allergenicity of soy protein severely restricts the potential adoption of soy protein as an animal substitute. Thereby, allergen-free plant-protein sources need to be characterized. Herein, we demonstrate a rapid solid-phase-microextraction gas-chromatography/mass-spectrometry (SPME-GC/MS) technique for comparing the volatile aroma profile concentration of two different allergen-free plant-protein sources (brown rice and pea) and comparing them with soy protein. The extraction procedure consisted of making a 1:7 w/v aqueous plant protein slurry, and then absorbing the volatile compounds on an SPME fibre under agitation for 10 min at 40 °C, which was subsequently injected onto a GC column coupled to an MS system. Observed volatile concentrations were used in conjunction with odour threshold values to generate a Total Volatile Aroma Score for each protein sample. A total of 76 volatile compounds were identified. Aldehydes and furans were determined to be the most dominant volatiles present in the plant proteins. Both brown rice protein and pea protein contained 64% aldehydes and 18% furans, with minor contents of alcohols, ketones and other compounds. On the other hand, soy protein consisted of fewer aldehydes (46%), but a more significant proportion of furans (42%). However, in terms of total concentration, brown rice protein contained the highest intensity and number of volatile compounds. Based on the calculated odour activity values of the detected compounds, our study concludes that pea proteins could be used as a suitable alternative to soy proteins in applications for allergen-free vegan protein products without interfering with the taste or flavour of the product.

ABSTRACT: The white mulberry leaves are typically available on the market in dried or encapsulated form. It was assumed in the study that appropriate drying of leaves of the white mulberry is significant for obtaining intermediate products with high content of compounds having anti-oxidative activity. The purpose of the study was to determine the influence of the temperature of mulberry leaves air drying on the content of phenolic acids and flavonols. It has been determined that the content of these compounds in the leaves depended on the drying temperature. Drying at 60 °C favored release of phenolic acids and flavonols from complexes and/or formation of new compounds. Their total content was 22% higher than in leaves dried at 30 °C. Drying at 90 °C reduced the phenolic acid and flavonol content by 24%. The most favorable drying temperature was 60 °C.

To meet the growing interest in natural antibacterial agents, we evaluated the physicochemical and biological properties of the folk medicine known as “five thieves’ oil” (Polish name: olejek pięciu złodziei). Five thieves’ oil consists of a mixture of five oils: rosemary, lemon, clove, eucalyptus, and cinnamon. In this study, we performed gas chromatography, FTIR, and UV–vis spectroscopic analysis, as well as L-a-b color tests, contact angle determination, and surface tension determination. To verify its antibacterial activity, the metabolic activity and changes in cell membrane permeability of bacteria of the genus Pseudomonas were studied. As a result, it was found that among the constituent oils, the oils of clove and cinnamon were the least volatile and, at the same time, had the strongest antibacterial activity. However, a mix of all the oils also showed comparable activity, which was even more pronounced for the oils after 4 weeks of aging. This effect can be linked to the high content of terpene derivatives such as eugenol and cinnamaldehyde, which can cause changes in bacterial membrane permeability, affecting cell activity and survival. This study is the first to characterize the constituents of the popular folk medicine five thieves’ oil, confirming and explaining its strong antibacterial activity, thus constituting a significant contribution to contemporary health education.

In this study, two saponins-rich plant extracts, viz. Saponaria officinalis and Quillaja saponaria, were used as surfactants in an oil-in-water (O/W) emulsion based on hempseed oil (HSO). This study focused on a low oil phase content of 2% v/v HSO to investigate stable emulsion systems under minimum oil phase conditions. Emulsion stability was characterized by the emulsification index (EI), centrifugation tests, droplet size distribution as well as microscopic imaging. The smallest droplets recorded by dynamic light scattering (droplets size v. number), one day after the preparation of the emulsion, were around 50–120 nm depending the on use of Saponaria and Quillaja as a surfactant and corresponding to critical micelle concentration (CMC) in the range 0–2 g/L. The surface and interfacial tension of the emulsion components were studied as well. The effect of emulsions on environmental bacteria strains was also investigated. It was observed that emulsions with Saponaria officinalis extract exhibited slight toxic activity (the cell metabolic activity reduced to 80%), in contrast to Quillaja emulsion, which induced Pseudomonas fluorescens ATCC 17400 growth. The highest-stability samples were those with doubled CMC concentration. The presented results demonstrate a possible use of oil emulsions based on plant extract rich in saponins for the food industry, biomedical and cosmetics applications, and nanoemulsion preparations.

Fluorescent submicron particles of fluorinated methacrylate (HFMBA) with long-term stability have been synthesized and characterized with regard to their potential applications. Rhodamine B (RBITC) isothiocyanate was used as the fluorescent component. The core–shell structure of the particles effectively protected the dye against bleaching. HFBMA nanoparticle (NP) stability was confirmed after seven years of storage. Only slight differences were found in the polydispersity index (pdi) from 0.002 to 0.010. Particle size measurements were carried out using dynamic light scattering (DLS), nanoparticle tracking (NTA), and fluorescence correlation spectroscopy (FCS). The hydrodynamic diameter evaluated by different methods were in good agreement, respectively: 184–550 nm, 218–579 nm, and 236–508 nm. Particle and core morphology was estimated by using scanning and transmission electron microscopy (SEM and TEM). The ability to recognize particles in 3D as a reference sample in biological media has been confirmed by epifluorescence optical microscopy, confocal laser scanning microscopy, and super-resolution confocal microscopy (STED).