Search

Low-resolution analog-to-digital converters (ADCs) and hybrid beamforming have emerged as efficient solutions to reduce power consumption with satisfactory spectral efficiency (SE) in massive multiple-input multiple-output (MIMO) systems. In this paper, we investigate the performance of a hybrid receiver in uplink massive MIMO orthogonal frequency-division multiplexing (OFDM) systems with low-resolution ADCs and oversampling. Considering both the temporal and spatial correlation of the quantization distortion (QD), we derive a closed-form approximation of the frequency-domain QD covariance matrix, which facilitates the evaluation of the system SE. Then we jointly design the analog and baseband combiners to maximize the SE. The formulated problem is significantly challenging due to the constant-modulus constraint of the analog combiner and its coupling with the digital one. To overcome the challenges, we transform the objective function into an equivalent but more tractable form and then iteratively update the analog and digital combiner. Numerical simulations verify the superiority of the proposed algorithm compared to the considered benchmarks and show the resilience of the hybrid receiver to beam squint for low-resolution systems. Furthermore, the results show that the proposed hybrid receiver design with oversampling can achieve significantly higher energy efficiency compared to the digital one., Comment: 6 pages, 4 figures, submitted to GlobeCom 2024

Low-resolution analog-to-digital converters (ADCs) have emerged as a promising technology for reducing power consumption and complexity in massive multiple-input multiple-output (MIMO) systems while maintaining satisfactory spectral and energy efficiencies (SE/EE). In this work, we first identify the essential properties of optimal quantization and leverage them to derive a closed-form approximation of the covariance matrix of the quantization distortion. The theoretical finding facilitates the system SE analysis in the presence of low-resolution ADCs. We then focus on the joint optimization of the transmit-receive beamforming and bit allocation to maximize the SE under constraints on the transmit power and the total number of active ADC bits. To solve the resulting mixed-integer problem, we first develop an efficient beamforming design for fixed ADC resolutions. Then, we propose a low-complexity heuristic algorithm to iteratively optimize the ADC resolutions and beamforming matrices. Numerical results for a $64 \times 64$ MIMO system demonstrate that the proposed design offers $6\%$ improvement in both SE and EE with $40\%$ fewer active ADC bits compared with the uniform bit allocation. Furthermore, we numerically show that receiving more data streams with low-resolution ADCs can achieve higher SE and EE compared to receiving fewer data streams with high-resolution ADCs., Comment: 13 pages, 14 figures

Low-resolution analog-to-digital converters (ADCs) have emerged as an efficient solution for massive multiple-input multiple-output (MIMO) systems to reap high data rates with reasonable power consumption and hardware complexity. In this paper, we analyze the performance of oversampling in uplink massive MIMO orthogonal frequency-division multiplexing (MIMO-OFDM) systems with low-resolution ADCs. Considering both the temporal and spatial correlation of the quantization distortion, we derive an approximate closed-form expression of an achievable sum rate, which reveals how the oversampling ratio (OSR), the ADC resolution, and the signal-to-noise ratio (SNR) jointly affect the system performance. In particular, we demonstrate that oversampling can effectively improve the sum rate by mitigating the impact of the quantization distortion, especially at high SNR and with very low ADC resolution. Furthermore, we show that the considered low-resolution massive MIMO-OFDM system can achieve the same performance as the unquantized one when both the SNR and the OSR are sufficiently high. Numerical simulations confirm our analysis., Comment: 5 papges, 5 figures, to be appeared in IEEE SPAWC2023

We investigate the beam squint effect in uniform planar arrays (UPAs) and propose an efficient hybrid beamforming (HBF) design to mitigate the beam squint in multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems operating at terahertz band. We first analyze the array gain and derive the closed-form beam squint ratio that characterizes the severity of the beam squint effect on UPAs. The effect is shown to be more severe with a higher fractional bandwidth, while it can be significantly mitigated when the shape of a UPA approaches a square. We then focus on the HBF design that maximizes the system spectral efficiency. The design problem is challenging due to the frequency-flat nature and hardware constraints of the analog beamformer. We overcome the challenges by proposing an efficient decoupling design in which the digital and analog beamformers admit closed-form solutions, which facilitate practical implementations. Numerical results validate our analysis and show that the proposed HBF design is robust to beam squint, and thus, it outperforms the state-of-the-art methods in wideband massive MIMO systems., Comment: 6 pages, 7 figures, to be appeared in IEEE ICC2023

Hybrid multiple-input multiple-output (MIMO) is an attractive technology for realizing extreme massive MIMO systems envisioned for future wireless communications in a scalable and power-efficient manner. However, the fact that hybrid MIMO systems implement part of their beamforming in analog and part in digital makes the optimization of their beampattern notably more challenging compared with conventional fully digital MIMO. Consequently, recent years have witnessed a growing interest in using data-aided artificial intelligence (AI) tools for hybrid beamforming design. This article reviews candidate strategies to leverage data to improve real-time hybrid beamforming design. We discuss the architectural constraints and characterize the core challenges associated with hybrid beamforming optimization. We then present how these challenges are treated via conventional optimization, and identify different AI-aided design approaches. These can be roughly divided into purely data-driven deep learning models and different forms of deep unfolding techniques for combining AI with classical optimization.We provide a systematic comparative study between existing approaches including both numerical evaluations and qualitative measures. We conclude by presenting future research opportunities associated with the incorporation of AI in hybrid MIMO systems., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Hybrid beamforming (HBF) is a key enabler for wideband terahertz (THz) massive multiple-input multiple-output (mMIMO) communications systems. A core challenge with designing HBF systems stems from the fact their application often involves a non-convex, highly complex optimization of large dimensions. In this paper, we propose HBF schemes that leverage data to enable efficient designs for both the fully-connected HBF (FC-HBF) and dynamic sub-connected HBF (SC-HBF) architectures. We develop a deep unfolding framework based on factorizing the optimal fully digital beamformer into analog and digital terms and formulating two corresponding equivalent least squares (LS) problems. Then, the digital beamformer is obtained via a closed-form LS solution, while the analog beamformer is obtained via ManNet, a lightweight sparsely-connected deep neural network based on unfolding projected gradient descent. Incorporating ManNet into the developed deep unfolding framework leads to the ManNet-based FC-HBF scheme. We show that the proposed ManNet can also be applied to SC-HBF designs after determining the connections between the radio frequency chain and antennas. We further develop a simplified version of ManNet, referred to as subManNet, that directly produces the sparse analog precoder for SC-HBF architectures. Both networks are trained with an unsupervised training procedure. Numerical results verify that the proposed ManNet/subManNet-based HBF approaches outperform the conventional model-based and deep unfolded counterparts with very low complexity and a fast run time. For example, in a simulation with 128 transmit antennas, it attains a slightly higher spectral efficiency than the Riemannian manifold scheme, but over 1000 times faster and with a complexity reduction of more than by a factor of six (6)., Comment: This paper has been submitted to IEEE Transaction on Signal Processing

Hybrid beamforming (HBF) transceiver architectures based on frequency-independent phase shifters (PS-HBF) are sensitive to the phases and physical directions with limited capability to compensate for the detrimental effects of the beam squint. Motivated by the fact that switches are phase-independent and more power/cost efficient than PSs, we consider the switch-based HBF (SW-HBF) for wideband large-scale multiple-input multiple-output systems in this paper. We first derive a closed-form expression of the beam squint ratio and compare the expected array gains of both SW-HBF and PS-HBF architectures. The results show that SW-HBF is more robust to the beam squint effect. We then focus on the SW-HBF designs to maximize the spectral efficiency (SE) in both single-user and multiuser systems, which are both non-convex mixed-integer problems. For the former, by combining the tabu search (TS) method and projected gradient ascend (PGA), we propose an efficient heuristic PGA-TS algorithm to design analog beamformers while the digital ones admit closed-form solutions. For the latter, we develop a two-step algorithm based on fractional programming and the PGA-TS method. Simulations show that the proposed SW-HBF schemes are efficient and can outperform PS-based HBF architectures in terms of both SE and energy efficiency in terahertz communication systems., Comment: 15 pages, 15 figures

Switch-based hybrid beamforming (SW-HBF) architectures are promising for realizing massive multiple-input multiple-output (MIMO) communications systems because of their low cost and low power consumption. In this paper, we study the performance of SW-HBF in a wideband multi-carrier MIMO communication system considering the beam squint effect. We aim at designing the switch-based combiner that maximizes the system spectral efficiency (SE). However, the design problem is challenging because the analog combing matrix elements are binary variables. To overcome this, we propose tabu search-based (TS) SW-HBF schemes that can attain near-optimal performance with reasonable computational complexity. Furthermore, we compare the total power consumption and energy efficiency (EE) of the SW-HBF architecture to those of the phase-shifter-based hybrid beamforming (PS-HBF) architecture. Numerical simulations show that the proposed algorithms can efficiently find near-optimal solutions. Moreover, the SW-HBF scheme can significantly mitigate the beam squint effect and is less affected by the number of subcarriers than PS-HBF. It also provides improved SE and EE performance compared to PS-HBF schemes., Comment: 6 pages, 8 figures, to appear in the Proceedings of the 25th International ITG Workshop on Smart Antennas (WSA 2021)

Hybrid beamforming is considered a key enabler to realize millimeter wave (mmWave) multiple-input multiple-output (MIMO) communications due to its capability of considerably reducing the number of costly and power-hungry radio frequency chains in the transceiver. However, in mmWave MIMO orthogonal frequency-division multiplexing (MIMO-OFDM) systems, hybrid beamforming design is challenging because the analog precoder and combiner are required to be shared across the whole employed bandwidth. In this paper, we propose closed-form solutions to the problem of designing the analog precoder/combiner in a mmWave MIMO-OFDM system by maximizing the upper bound of the spectral efficiency. The closed-form solutions facilitate the design of analog beamformers while guaranteeing state-of-art performance. Numerical results show that the proposed algorithm attains a slightly improved performance with much lower computational complexity compared to the considered benchmarks., Comment: 5 pages, 5 figures, to appear in the proceedings of VTC2021-Fall

Admission control is an effective solution to managing a wireless network with a large user set. It dynamically rejects users in bad conditions, and thereby guarantees high quality-of-service (QoS) for the others. Unfortunately, a frequently-varying admissible user set requests remarkable power to continually re-establish the transmission link. Hence, we explore the stability of admissible user set, and formulate a joint long-term admission control and beamforming problem for a network with one multi-antenna base station (BS) and multiple single-antenna users. We consider the downlink transmission in a time period containing multiple time slices. By jointly optimizing the admissible users and the BS transmit beamformers in different time slices, we aim to minimize the total power cost, including not only the power for QoS guarantee, but also the power for user status switching. Due to the NP-hardness of the problem, we develop two (offline and online) algorithms to find some efficient suboptimal solutions. The offline algorithm requires all channel state information (CSI), and solves the admissible users and beamformers in different time slices in one shot, based on successive upper-bound minimization (SUM). To support real-time data transmission, we further design an alternating direction method of multipliers (ADMM)-based online algorithm, which outputs the admissible users and beamformers in different time slices successively, utilizing the previous admissible user set, the actual value of current CSI, and the distribution of future CSI. Simulations validate the performance of the two algorithms, and show that the online algorithm is an efficient practical alternative to the offline algorithm., Comment: 12 pages, 13 figure