Search

Efficacy of a pilot plant steam treatment system in controlling Listeria monocytogenes contamination of King Salmon is evaluated.

Three nanocomposite materials with the same nominal stoichiometric thermite composition of 2Al-3CuO were prepared by three different methods: ultrasonic mixing (USM) of constituent nanopowders, electrospraying (ES), and arrested reactive milling (ARM). Prepared powders were placed in a 6.7-mm diameter, 0.5-mm-deep cavity in a brass substrate and ignited by electro-static discharge. The experiments were performed in air, argon, and helium. The mass of powder removed from the sample holder after ignition was measured in each test. Using a multi-anode photo-multiplier tube coupled with a spectrometer, time-resolved light emission traces produced by the ignited samples were recorded in the range of wavelengths of 373–641 nm. Time-resolved temperatures were then determined by fitting the recorded spectra assuming Planck’s black body emission. Temporal pressure generated by ignition events in the enclosed chamber showed that the powder’s combustion properties were tied to both their preparation technique as well as the environment they were ignited in. We found that agglomeration of nanoparticles hindered combustion of USM powders; while it was not observed for the ES powders. In oxygen-free gas environments, lower temperatures and pressures were observed for USM and ES powders prepared using starting nano-particles. For the ES powders, the effect of gas environment was less significant, which was interpreted considering that ES materials included gasifying nitrocellulose binder, enhancing heat, and mass transfer between individual Al and CuO particles. Higher pressures and temperatures were observed in inert environments for the ARM-prepared powder. [ABSTRACT FROM AUTHOR]

Nanocomposite powders with aluminum as a fuel and oxides of molybdenum, copper, bismuth, and iron as oxidizers were prepared by arrested reactive milling. The powders were placed in 0.5-mm-thick layers and ignited by electrostatic discharge (ESD) in air. In different tests, time-resolved light emission was recorded at 568 nm or in the range of 373–641 nm. The amount of material consumed was recorded as well. Time-resolved temperatures were determined. Two distinct ignition regimes were observed. Prompt ignition occurred within 10 µs of the electric discharge, comparable to what had previously been observed for corresponding powder monolayers. This ignition mode was observed for composites with Bi2O3and Fe2O3ignited with a 12-kV discharge, whereas it only occurred at higher spark voltage (20 kV) and energy for CuO and MoO3composites. Delayed ignition, occurring after 0.1–1 ms following the discharge, was observed for all composites with consistently stronger light emission. Analysis of quenched, partially burned particles showed that the original nanostructure was preserved after prompt ignition but not after delayed ignition. It is proposed that prompt ignition represents direct ESD initiation of composite particles rapidly and adiabatically preheated to high temperatures while keeping the nanostructure intact, resulting in a heterogeneous reaction consuming most of the aluminum. Delayed ignition occurs when particles preheated to lower temperatures start oxidizing at much lower rates, leading to cloud combustion, in which thermal interaction between individual aerosolized burning particles is substantial. During this process, the nanostructure may be lost. Temperature measurements show that nanocomposites with CuO and MoO3burned superadiabatically with flame temperatures exceeding thermodynamic predictions. [ABSTRACT FROM PUBLISHER]

Aims: To determine the effect of chlorine on mixed bacterial biofilms on stainless steel (SS) and conveyor belt surfaces. Methods and Results: Biofilms were exposed to pH-adjusted (6·5) and non-pH-adjusted solutions of chlorine (200, 400 and 600 ppm) for either 2, 10 or 20 min and survivors enumerated. There were significant differences in cell death relating to chlorine concentration and exposure time for the cells attached to the SS, with solutions adjusted to pH 6·5 being more effective at reducing numbers. In contrast, on conveyor belt surfaces cell numbers decreased by less than two logs after 20 min regardless of treatment. Conclusions: Chlorine effectiveness is dependent on its concentration, solution pH, exposure time, the nature of the surface and the microbial species present. Significance and Impact of Study: In the interests of food safety it is important that sanitizer users are aware of the conditions that effect their performance. [ABSTRACT FROM AUTHOR]

Between 1953 and 1962, 21 patients presented with bronchial strictures. Bronchial reconstruction was carried out on 15 of these while a dermal graft was employed in another six patients. The follow-up period, therefore, is between 10 and 20 years. Bronchial structures lend themselves to satisfactory reconstruction. This review, however, showed that late contraction of a dermal graft may occur even two years after operation. [ABSTRACT FROM PUBLISHER]

The changes in pulmonary compliance have been studied under conditions of total body hypothermia. Five groups of sheep were used; two groups were controls—one for the effects of anaesthesia and the other for normothermic biventricular bypass. The third group was cooled using a femoro-femoral arterio-venous shunt to 20°-23° C. The fourth group was cooled to 15° C. and rewarmed using the Drew technique. The excised lungs of the remaining sheep were studied at 37° and 15° C. (fifth group). The controls showed little change in compliance. The cooled animals showed a decrease in compliance. In the group subjected to hypothermia by the Drew technique, the rewarming phase initially brought a return towards normal compliance. As the temperature rose to 24°-30° C. the improvement in compliance ceased and thereafter compliance decreased for two hours after rewarming. Histologically the lungs were normal. There was no compliance change caused by cooling the excised lungs. [ABSTRACT FROM PUBLISHER]

Abstract Background Internalin A (InlA) is a critical virulence factor which mediates the initiation of Listeria monocytogenes infection by the oral route in permissive hosts. The interaction of InlA with the host cell ligand E-cadherin efficiently stimulates L. monocytogenes entry into human enterocytes, but has only a limited interaction with murine cells. Results We have created a surface display library of randomly mutated InlA in a non-invasive heterologous host Lactococcus lactis in order to create and screen novel variants of this invasion factor. After sequential passage through a murine cell line (CT-26), multiple clones with enhanced invasion characteristics were identified. Competitive index experiments were conducted in mice using selected mutations introduced into L. monocytogenes EGD-e background. A novel single amino acid change was identified which enhanced virulence by the oral route in the murine model and will form the basis of further engineering approaches. As a control a previously described EGD-InlAm murinized strain was also re-created as part of this study with minor modifications and designated EGD-e InlAm*. The strain was created using a procedure that minimizes the likelihood of secondary mutations and incorporates Listeria-optimized codons encoding the altered amino acids. L. monocytogenes EGD-e InlAm* yielded consistently higher level murine infections by the oral route when compared to EGD-e, but did not display the two-fold increased invasion into a human cell line that was previously described for the EGD-InlAm strain. Conclusions We have used both site-directed mutagenesis and directed evolution to create variants of InlA which may inform future structure-function analyses of this protein. During the course of the study we engineered a murinized strain of L. monocytogenes EGD-e which shows reproducibly higher infectivity in the intragastric murine infection model than the wild type, but does not display enhanced entry into human cells as previously observed. This murinized L. monocytogenes strain will provide a useful tool for the analysis of the gastrointestinal phase of listeriosis.

Abstract Background The foodborne, gram-positive pathogen, Listeria monocytogenes, is capable of causing lethal infections in compromised individuals. In the post genomic era of L. monocytogenes research, techniques are required to identify and validate genes involved in the pathogenicity and environmental biology of the organism. The aim here was to develop a widely applicable method to tag L. monocytogenes strains, with a particular emphasis on the development of multiple strain competitive index assays. Results We have constructed a new site-specific integrative vector, pIMC, based on pPL2, for the selection of L. monocytogenes from complex samples. The pIMC vector was further modified through the incorporation of IPTG inducible markers (antibiotic and phenotypic) to produce a suite of four vectors which allowed the discrimination of multiple strains from a single sample. We were able to perform murine infection studies with up to four EGDe isolates within a single mouse and showed that the tags did not impact upon growth rate or virulence. The system also allowed the identification of subtle differences in virulence between strains of L. monocytogenes commonly used in laboratory studies. Conclusion This study has developed a competitive index assay that can be broadly applied to all L. monocytogenes strains. Improved statistical robustness of the data was observed, resulting in fewer mice being required for virulence assays. The competitive index assays provide a powerful method to analyse the virulence or fitness of L. monocytogenes in complex biological samples.

The article lists books on the history of political thought, including "The British Marxist Historians: An Introductory Analysis," by Harvey J. Kaye, "Politics and Language in Dryden's Poetry," by Steven N. Zwicker and "The State and Political Theory," by Martin Carnoy.

Even in the setting of optimal resuscitation in high-income countries severe sepsis and septic shock have a mortality of 20-40%, with antibiotic resistance dramatically increasing this mortality risk. To develop a reference dataset enabling the identification of common bacterial targets for therapeutic intervention, we applied a standardized genomic, transcriptomic, proteomic and metabolomic technological framework to multiple clinical isolates of four sepsis-causing pathogens: Escherichia coli, Klebsiella pneumoniae species complex, Staphylococcus aureus and Streptococcus pyogenes. Exposure to human serum generated a sepsis molecular signature containing global increases in fatty acid and lipid biosynthesis and metabolism, consistent with cell envelope remodelling and nutrient adaptation for osmoprotection. In addition, acquisition of cholesterol was identified across the bacterial species. This detailed reference dataset has been established as an open resource to support discovery and translational research., (© 2023. The Author(s).)

Bacterial histidine kinases are promising targets for new antimicrobial agents. In antibacterial therapy, such agents could inhibit bacterial growth by targeting essential two-component regulatory systems or resensitize bacteria to known antibiotics by blocking stress responses upon cell wall or cell membrane damage. However, (i) activity assays using truncated kinase proteins, that is, the cytoplasmic domains containing the conserved histidine residue for phosphorylation, have been shown to produce artifacts, and (ii) the purification of the full-length histidine kinases is complicated. Here, we describe a standard protocol for the recombinant expression and purification of functional full-length histidine kinases and other membrane proteins from Gram-positive bacteria that do not harbor more than two trans-membrane domains in an Escherichia coli host. This guide also presents in vitro and in vivo phosphorylation assays to screen for new antimicrobial compounds that target bacterial histidine kinases, either using a traditional radioactively labeled ATP assay to quantify histidine kinase phosphorylation or Phos-tag acrylamide gel electrophoresis to examine histidine kinase phosphorylation through mobility shift in the polyacrylamide gel. In addition, we describe the use of Phos-tag combined with a western blot approach to visualize the phosphorylation of a response regulator in vivo., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Mutation acquisition is a major mechanism of bacterial antibiotic resistance that remains insufficiently characterised. Here we present RM-seq, a new amplicon-based deep sequencing workflow based on a molecular barcoding technique adapted from Low Error Amplicon sequencing (LEA-seq). RM-seq allows detection and functional assessment of mutational resistance at high throughput from mixed bacterial populations. The sensitive detection of very low-frequency resistant sub-populations permits characterisation of antibiotic-linked mutational repertoires in vitro and detection of rare resistant populations during infections. Accurate quantification of resistance mutations enables phenotypic screening of mutations conferring pleiotropic phenotypes such as in vivo persistence, collateral sensitivity or cross-resistance. RM-seq will facilitate comprehensive detection, characterisation and surveillance of resistant bacterial populations ( https://github.com/rguerillot/RM-seq ).