Search

Since the 1940s, infrared (IR) detection and imaging at wavelengths in the two atmospheric windows of 3 to 5 and 8 to 14 μm has been extensively researched. Through several generations, these detectors have undergone considerable developments and have found use in various applications in different fields including military, space science, medicine and engineering. For the most recently proposed generation, these detectors are required to achieve high-speed detection with spectral and polarization selectivity while operating at room temperature. Antenna coupled IR detectors appear to be the most promising candidate to achieve these requirements and has received substantial attention from research in recent years. This paper sets out to present a review of the antenna coupled IR detector family, to explore the main concepts behind the detectors as well as outline their critical and challenging design considerations. In this context, the design of both elements, the antenna and the sensor, will be presented individually followed by the challenging techniques in the impedance matching between both elements. Some hands-on fabrication techniques will then be explored. Finally, a discussion on the coupled IR detector is presented with the aim of providing some useful insights into promising future work.

Abstract: The femtosecond-fast transport in metal–insulator–metal (MIM) tunnel diodes makes them attractive for applications such as ultra-high frequency rectenna detectors and solar cells, and mixers. These applications impose severe requirements on the diode current–voltage I(V) characteristics. For example, rectennas operating at terahertz or higher frequencies require diodes to have low resistance and adequate nonlinearity. To analyze and design MIM diodes with the desired characteristics, we developed a simulator based on the transfer-matrix method, and verified its accuracy by comparing simulated I(V) characteristics with those measured in MIM diodes that we fabricated by sputtering, and also with simulations based on the quantum transmitting boundary method. Single-insulator low-resistance diodes are not sufficiently nonlinear for efficient rectennas. Multi-insulator diodes can be engineered to provide both low resistance and substantial nonlinearity. The improved performance of multi-insulator diodes can result from either resonant tunneling or a step change in tunneling distance with voltage, either of which can be made to dominate by the appropriate choice of insulators and barrier thicknesses. The stability of the interfaces in the MIIM diodes is confirmed through a thermodynamic analysis. [Copyright &y& Elsevier]

In this paper, a novel arrangement for dual-band millimeter-wave and infrared focal plane array based on slot-antenna-coupled metal-oxide-metal diodes is demonstrated. The receiving properties for millimeter-wave and infrared antenna-coupled detector pixels are presented. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 46: 78–80, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20906 [ABSTRACT FROM AUTHOR]

Since the 1940s, infrared (IR) detection and imaging at wavelengths in the two atmospheric windows of 3 to 5 and 8 to 14 μm has been extensively researched. Through several generations, these detectors have undergone considerable developments and have found use in various applications in different fields including military, space science, medicine and engineering. For the most recently proposed generation, these detectors are required to achieve high-speed detection with spectral and polarization selectivity while operating at room temperature. Antenna coupled IR detectors appear to be the most promising candidate to achieve these requirements and has received substantial attention from research in recent years. This paper sets out to present a review of the antenna coupled IR detector family, to explore the main concepts behind the detectors as well as outline their critical and challenging design considerations. In this context, the design of both elements, the antenna and the sensor, will be presented individually followed by the challenging techniques in the impedance matching between both elements. Some hands-on fabrication techniques will then be explored. Finally, a discussion on the coupled IR detector is presented with the aim of providing some useful insights into promising future work. [ABSTRACT FROM AUTHOR]