Search

Your search keyword '"MIM Switch"' showing total 5 results
Start Over Descriptor "MIM Switch"
5 results on '"MIM Switch"'

1. Design and Simulation of a MIM Capacitor Type RF MEMS Switch for Surface Radar Application

Author

Susmitha, Akula, Sravani, Thiparani, Yogitha, Bhogadula, Keerthika, G., Sonali, M., Ashok Kumar, P., Girija Sravani, K., Srinivas Rao, K., Angrisani, Leopoldo, Series Editor, Arteaga, Marco, Series Editor, Panigrahi, Bijaya Ketan, Series Editor, Chakraborty, Samarjit, Series Editor, Chen, Jiming, Series Editor, Chen, Shanben, Series Editor, Chen, Tan Kay, Series Editor, Dillmann, Ruediger, Series Editor, Duan, Haibin, Series Editor, Ferrari, Gianluigi, Series Editor, Ferre, Manuel, Series Editor, Hirche, Sandra, Series Editor, Jabbari, Faryar, Series Editor, Jia, Limin, Series Editor, Kacprzyk, Janusz, Series Editor, Khamis, Alaa, Series Editor, Kroeger, Torsten, Series Editor, Liang, Qilian, Series Editor, Ming, Tan Cher, Series Editor, Minker, Wolfgang, Series Editor, Misra, Pradeep, Series Editor, Möller, Sebastian, Series Editor, Mukhopadhyay, Subhas, Series Editor, Ning, Cun-Zheng, Series Editor, Nishida, Toyoaki, Series Editor, Pascucci, Federica, Series Editor, Qin, Yong, Series Editor, Seng, Gan Woon, Series Editor, Veiga, Germano, Series Editor, Wu, Haitao, Series Editor, Zhang, Junjie James, Series Editor, Panda, Ganapati, editor, Satapathy, Suresh Chandra, editor, Biswal, Birendra, editor, and Bansal, Ramesh, editor

Published
2019
Full Text
View/download PDF

2. Electronically Re-Configurable, Non-Volatile, Nano-Ionics-Based RF-Switch on Paper Substrate for Chipless RFID Applications

Author

Jayakrishnan Methapettyparambu Purushothama, Arnaud Vena, Brice Sorli, and Etienne Perret

Subjects
CBRAM, MIM switch, chipless RFID, RF-switch, electronically reconfigurable switch, Technology
Abstract

This article reports the first results of a Nafion®-based, solid state, non-volatile, electronically reconfigurable Radio Frequency (RF)-switch integrated to a co-planar waveguide transmission line (CPW) in shunt mode, on a flexible paper substrate. The switch is based on a metal–insulator–metal structure formed respectively using Silver–Nafion–aluminum switching layers. The presented device is fully passive and shows good performance till 3 GHz, with an insertion loss less than 3 dB in the RF-on state and isolation greater than 15 dB in the RF-off state. Low-power direct current pulses in the range 10 V/0.5 mA and −20 V/0.15 A are used to operate the switch. The device was fabricated in an ambient laboratory condition, without the use of any clean room facilities. A brief discussion of the results and potential application of this concept in a re-configurable chipless RFID tag is also given in this article. This study is a proof of concept of fabrication of electronically re-configurable and disposable RF-electronic switches on low cost and flexible substrates, using a process feasible for mass production.

Published
2018
Full Text
View/download PDF

3. Electronically Re-Writable Chipless RFID Tag Using Solid State Metal-Insulator-Metal Switches on Paper Substrate

Author

Etienne Perret, Brice Sorli, Arnaud Vena, M.P. Jayakrishnan, Laboratoire de Conception et d'Intégration des Systèmes (LCIS), Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Université Grenoble Alpes [2016-2019] (UGA [2016-2019]), Institut d’Electronique et des Systèmes (IES), Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS), Matériaux, MicroCapteurs et Acoustique (M2A), and Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS)-Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS)

Subjects
Materials science, business.industry, Programmable metallization cell, 010401 analytical chemistry, Rewritable Chipless RFID, Reconfigurability, 020206 networking & telecommunications, 02 engineering and technology, CBRAM, 01 natural sciences, Capacitance, Optical switch, Signature (logic), 0104 chemical sciences, Resonator, Chipless RFID, [SPI]Engineering Sciences [physics], [SPI.ELEC]Engineering Sciences [physics]/Electromagnetism, Electrical length, MIM Switch, 0202 electrical engineering, electronic engineering, information engineering, Optoelectronics, business
Abstract

International audience; In this article, we present the design and results of an electronically re-writable chipless RFID tag on paper substrate. This tag consists of two resonators build around a modified shorted dipole, integrated with a non-volatile Metal-Insulator-Metal (MIM) switch, which tunes the electrical length of each resonator to resonate at two different frequencies, depending on state of the switch. One can electronically reconfigure the tag using low power DC pulses to change its RF signature. The integrated MIM switch has a layer architecture of Silver-Nafion-Aluminum, formed exclusively using an in-house process in ambient laboratory conditions, notably without the use of any 'clean room' facilities. Operating mechanism of the tag is validated with the help of developed electrical equivalent model. This study proves the concept of realizing 'electronically reconfigurable' chipless tags on flexible and low cost substrates, with a fabrication process compatible with mass production.

Published
2019

4. Solid-State Conductive-Bridging Reconfigurable RF-Encoding Particle for Chipless RFID Applications

Author

Etienne Perret, M.P. Jayakrishnan, Brice Sorli, Arnaud Vena, Laboratoire de Conception et d'Intégration des Systèmes (LCIS), Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Université Grenoble Alpes [2016-2019] (UGA [2016-2019]), Institut d’Electronique et des Systèmes (IES), Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS), Matériaux, MicroCapteurs et Acoustique (M2A), and Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS)-Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS)

Subjects
Computer science, Programmable metallization cell, business.industry, 020208 electrical & electronic engineering, Electrical engineering, 020206 networking & telecommunications, 02 engineering and technology, Chipless RFID, CBRAM, Condensed Matter Physics, RF Switch, Resonator, [SPI.ELEC]Engineering Sciences [physics]/Electromagnetism, RF switch, Electrical length, Proof of concept, MIM Switch, 0202 electrical engineering, electronic engineering, information engineering, Radio frequency, Electrical and Electronic Engineering, business, Electrical conductor
Abstract

We report the design and first results of a reconfigurable RF-encoding particle (REP) for chipless RFID tag, based on a Nafion conductive-bridging random-access memory cell. The developed tag consists of a modified shorted dipole as REP, equipped with a copper–Nafion–aluminum metal–insulator–metal (MIM) nonvolatile ionic-bridging switch. The MIM switch is similar to an RC parallel network, which tunes the electrical length of the resonator. The chipless tags switch between two different resonant frequencies, in the set and reset states of the switch. An electrical model is also developed for the REP to explain the mechanism of switching. The experimental results are in close agreement with the simulation results using commercial electromagnetic simulators. This letter is a proof of concept of electronically reconfigurable chipless tags based on integrated switches which have the potential to be directly printed along with the tag.

Published
2018

5. Electronically Re-Configurable, Non-Volatile, Nano-Ionics-Based RF-Switch on Paper Substrate for Chipless RFID Applications.

Author

Methapettyparambu Purushothama, Jayakrishnan, Vena, Arnaud, Sorli, Brice, and Perret, Etienne

Subjects
RADIO frequency identification systems, WAVEGUIDES, METAL-insulator-metal devices, ALUMINUM-silver alloys, ADAPTIVE computing systems
Abstract

This article reports the first results of a Nafion®-based, solid state, non-volatile, electronically reconfigurable Radio Frequency (RF)-switch integrated to a co-planar waveguide transmission line (CPW) in shunt mode, on a flexible paper substrate. The switch is based on a metal–insulator–metal structure formed respectively using Silver–Nafion–aluminum switching layers. The presented device is fully passive and shows good performance till 3 GHz, with an insertion loss less than 3 dB in the RF-on state and isolation greater than 15 dB in the RF-off state. Low-power direct current pulses in the range 10 V/0.5 mA and −20 V/0.15 A are used to operate the switch. The device was fabricated in an ambient laboratory condition, without the use of any clean room facilities. A brief discussion of the results and potential application of this concept in a re-configurable chipless RFID tag is also given in this article. This study is a proof of concept of fabrication of electronically re-configurable and disposable RF-electronic switches on low cost and flexible substrates, using a process feasible for mass production. [ABSTRACT FROM AUTHOR]

Published
2018
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results