Search

The effect of extensive and intensive green roofs on improving outdoor microclimate parameters of urban built environments is currently a worldwide focus of research. Due to the lack of reliable data for Belgrade, the impact of extensive and intensive green roof systems on mitigating the effects of urban heat islands and improving microclimatic conditions by utilizing high albedo materials in public spaces were studied. Research was conducted on four chosen urban units within existing residential blocks in the city that were representative of typical urban planning and construction within the Belgrade metropolitan area. Five different models (baseline model and four potential models of retrofitting) were designed, for which the temperature changes at pedestrian and roof levels at 07:00, 13:00, 19:00 h, on a typical summer day, and at 01:00 h, the following night in Belgrade were investigated. The ENVI-met software was used to model the simulations. The results of numerical modeling showed that utilizing green roofs in the Belgrade climatic area could reduce air temperatures in the surroundings up to 0.47, 1.51, 1.60, 1.80 °C at pedestrian level and up to 0.53, 1.45, 0.90, 1.45 °C at roof level for four potential retrofitting strategies, respectively. [ABSTRACT FROM AUTHOR]

In this paper we present a conceptual solution of modular panel for measuring health parameters of the elderly. The conceptual solution was followed by a study that analyzed the design and evaluated interface of the system. Modular panel contains sensors, processing unit, and interface enabling data acquisition and communication between the user and the medical staff. Positioning of the panel within the residential unit was determined by the categories of actions which it should provide and functional areas of typical housing unit. Interface design is based on a specific type of users and is on the basis of the type of data that should be collected and displayed. Evaluation of interface is conducted by using two user groups, where the first is made up of people older than 60 years and represents the interest group of the study, while the second group consisted of people younger than 60 years as the control group. The collected data were analyzed and the results indicate that the simplicity of the interface suits good to the users. Elderly users need more time to conduct certain commands, but most of them understood interface completely. The limitations of the system, such as lack of information provided for the users, will be considered in the future work. [ABSTRACT FROM AUTHOR]

Paper presents stress calculation in the stationary temperature domain for a hybrid structure with standard epoxy-carbon fiber composite and metallic part, showing different thermal behaviour. The thermal stress analysis is based on the finite element method. A sample problem involving such a composite plate and metallic part of structure or mould at two different temperature levels, corresponding to curing process (co-curing) and operating temperatures, respectively, is calculated and discussed. The specific properties of composite are emphasized particularly for thermal coefficients, especially if the shear coefficient is different than zero, causing completely different behaviour compared to isotropic materials. [ABSTRACT FROM AUTHOR]

A numerical study of transient three-dimensional heat conduction problem with a moving source is presented. For numerical solution Douglas-Gunn alternating direction implicit method is applied and for the moving heat source flux distribution Gaussian function is used. An influence on numerical solution of input parameters figuring in flux boundary conditions is examined. This include parameters appearing in Gaussian function and heat transfer coefficient from free convection boundaries. Sensitivity of cooling time from 800 to 500 °C with respect to input parameters is also tested. [ABSTRACT FROM AUTHOR]