Search

Background: Globally, the cultivation of cotton is constrained by its tendency for extended periods of growth. Early maturity plays a potential role in rainfed-based multiple cropping system especially in the current era of climate change. In the current study, a set of 20 diverse Gossypium hirsutum genotypes were evaluated in two crop seasons with three planting densities and assessed for 11 morphological traits related to early maturity. The study aimed to identify genotype(s) that mature rapidly and accomplish well under diverse environmental conditions based on the two robust multivariate techniques called multi-trait stability index (MTSI) and multi-trait genotype-ideotype distance index (MGIDI). Results: MTSI analysis revealed that out of the 20 genotypes, three genotypes, viz., NNDC-30, A-2, and S-32 accomplished well in terms of early maturity traits in two seasons. Furthermore, three genotypes were selected using MGIDI method for each planting densities with a selection intensity of 15%. The strengths and weaknesses of the genotypes selected based on MGIDI method highlighted that the breeders could focus on developing early-maturing genotypes with specific traits such as days to first flower and boll opening. The selected genotypes exhibited positive genetic gains for traits related to earliness and a successful harvest during the first and second pickings. However, there were negative gains for traits related to flowering and boll opening. Conclusion: The study identified three genotypes exhibiting early maturity and accomplished well under different planting densities. The multivariate methods (MTSI and MGIDI) serve as novel approaches for selecting desired genotypes in plant breeding programs, especially across various growing environments. These methods offer exclusive benefits and can easily construe and minimize multicollinearity issues. [ABSTRACT FROM AUTHOR]

Water deficit stress triggers various physiological and biochemical changes in plants, substantially affecting both overall plant defense response and thus nutritional quality of tomatoes. The aim of this study was to assess the antioxidant defense response and nutritional quality of different tomato genotypes under water deficit stress. In this study, six tomato genotypes were used and subjected to water deficit stress by withholding water for eight days under glass house conditions. Various physiological parameters from leaves and biochemical parameters from tomato fruits were measured to check the effect of antioxidant defense response and nutritional value. Multi-trait genotypeideotype distance index (MGIDI) was used for the selection of genotypes with improved defense response and nutritional value under water deficit stress condition. Results indicated that all physiological parameters declined under stress conditions compared to the control. Notably, NBH-362 demonstrated resilience to water deficit stress, improving both defense response and nutritional quality which is evident by an increase in proline (16.91%), reducing sugars (20.15%), total flavonoids (10.43%), superoxide dismutase (24.65%), peroxidase (14.7%), and total antioxidant capacity (29.9%), along with a decrease in total oxidant status (4.38%) under stress condition. Overall, the findings suggest that exposure to water deficit stress has the potential to enhance the nutritional quality of tomatoes. However, the degree of this enhancement is contingent upon the distinct genetic characteristics of various tomato genotypes. Furthermore, the promising genotype (NBH-362) identified in this study holds potential for future utilization in breeding programs. [ABSTRACT FROM AUTHOR]

Abstract Background Globally, the cultivation of cotton is constrained by its tendency for extended periods of growth. Early maturity plays a potential role in rainfed-based multiple cropping system especially in the current era of climate change. In the current study, a set of 20 diverse Gossypium hirsutum genotypes were evaluated in two crop seasons with three planting densities and assessed for 11 morphological traits related to early maturity. The study aimed to identify genotype(s) that mature rapidly and accomplish well under diverse environmental conditions based on the two robust multivariate techniques called multi-trait stability index (MTSI) and multi-trait genotype-ideotype distance index (MGIDI). Results MTSI analysis revealed that out of the 20 genotypes, three genotypes, viz., NNDC-30, A-2, and S-32 accomplished well in terms of early maturity traits in two seasons. Furthermore, three genotypes were selected using MGIDI method for each planting densities with a selection intensity of 15%. The strengths and weaknesses of the genotypes selected based on MGIDI method highlighted that the breeders could focus on developing early-maturing genotypes with specific traits such as days to first flower and boll opening. The selected genotypes exhibited positive genetic gains for traits related to earliness and a successful harvest during the first and second pickings. However, there were negative gains for traits related to flowering and boll opening. Conclusion The study identified three genotypes exhibiting early maturity and accomplished well under different planting densities. The multivariate methods (MTSI and MGIDI) serve as novel approaches for selecting desired genotypes in plant breeding programs, especially across various growing environments. These methods offer exclusive benefits and can easily construe and minimize multicollinearity issues.

Abstract Climate change has brought an alarming situation in the scarcity of fresh water for irrigation due to the present global water crisis, climate variability, drought, increasing demands of water from the industrial sectors, and contamination of water resources. Accurately evaluating the potential of future rice genotypes in large-scale, multi-environment experiments may be challenging. A key component of the accurate assessment is the examination of stability in growth contexts and genotype-environment interaction. Using a split-plot design with three replications, the study was carried out in nine locations with five genotypes under continuous flooding (CF) and alternate wet and dry (AWD) conditions. Utilizing the web-based warehouse inventory search tool (WIST), the water status was determined. To evaluate yield performance for stability and adaptability, AMMI and GGE biplots were used. The genotypes clearly reacted inversely to the various environments, and substantial interactions were identified. Out of all the environments, G3 (BRRI dhan29) had the greatest grain production, whereas G2 (Binadhan-8) had the lowest. The range between the greatest and lowest mean values of rice grain output (4.95 to 4.62 t ha-1) was consistent across five distinct rice genotypes. The genotype means varied from 5.03 to 4.73 t ha-1 depending on the environment. In AWD, all genotypes out performed in the CF system. With just a little interaction effect, the score was almost zero for several genotypes (E1, E2, E6, and E7 for the AWD technique, and E5, E6, E8, and E9 for the CF method) because they performed better in particular settings. The GGE biplot provided more evidence in support of the AMMI study results. The study's findings made it clear that the AMMI model provides a substantial amount of information when evaluating varietal performance across many environments. Out of the five accessions that were analyzed, one was found to be top-ranking by the multi-trait genotype ideotype distance index, meaning that it may be investigated for validation stability measures. The study's findings provide helpful information on the variety selection for the settings in which BRRI dhan47 and BRRI dhan29, respectively, performed effectively in AWD and CF systems. Plant breeders might use this knowledge to choose newer kinds and to design breeding initiatives. In conclusion, intermittent irrigation could be an effective adaptation technique for simultaneously saving water and mitigating GHG while maintaining high rice grain yields in rice cultivation systems.

Climate change has brought an alarming situation in the scarcity of fresh water for irrigation due to the present global water crisis, climate variability, drought, increasing demands of water from the industrial sectors, and contamination of water resources. Accurately evaluating the potential of future rice genotypes in large-scale, multi-environment experiments may be challenging. A key component of the accurate assessment is the examination of stability in growth contexts and genotype-environment interaction. Using a split-plot design with three replications, the study was carried out in nine locations with five genotypes under continuous flooding (CF) and alternate wet and dry (AWD) conditions. Utilizing the web-based warehouse inventory search tool (WIST), the water status was determined. To evaluate yield performance for stability and adaptability, AMMI and GGE biplots were used. The genotypes clearly reacted inversely to the various environments, and substantial interactions were identified. Out of all the environments, G3 (BRRI dhan29) had the greatest grain production, whereas G2 (Binadhan-8) had the lowest. The range between the greatest and lowest mean values of rice grain output (4.95 to 4.62 t ha-1) was consistent across five distinct rice genotypes. The genotype means varied from 5.03 to 4.73 t ha-1 depending on the environment. In AWD, all genotypes out performed in the CF system. With just a little interaction effect, the score was almost zero for several genotypes (E1, E2, E6, and E7 for the AWD technique, and E5, E6, E8, and E9 for the CF method) because they performed better in particular settings. The GGE biplot provided more evidence in support of the AMMI study results. The study's findings made it clear that the AMMI model provides a substantial amount of information when evaluating varietal performance across many environments. Out of the five accessions that were analyzed, one was found to be top-ranking by the multi-trait genotype ideotype distance index, meaning that it may be investigated for validation stability measures. The study's findings provide helpful information on the variety selection for the settings in which BRRI dhan47 and BRRI dhan29, respectively, performed effectively in AWD and CF systems. Plant breeders might use this knowledge to choose newer kinds and to design breeding initiatives. In conclusion, intermittent irrigation could be an effective adaptation technique for simultaneously saving water and mitigating GHG while maintaining high rice grain yields in rice cultivation systems. [ABSTRACT FROM AUTHOR]

Drought stress constricts crop production around the world. Employing high-yielding cultivars with drought tolerance might be the ideal professional approach to coping with its detrimental outcomes. As a result, the current study was performed to investigate the sensitivity and tolerance of nine wheat genotypes to drought stress. In a randomized block design experiment, nine wheat genotypes were subjected to four water treatments: 100%, 85%, 70%, and 55% of the available water (AW). Four water regimes in two growing seasons were counted as eight environmental zones. The leaf's water relations and photosynthetic pigment were estimated, as well as growth and yield parameters. Univariate and multivariate statistical approaches, including the new method of multi-trait genotype–ideotype distance (MGIDI), were used for evaluation. The analysis of variance revealed that genotype, environment, and their interactions had a highly significant effect on all traits. The same trend was shown by the additive main effects and multiplicative interaction (AMMI) analysis of variance for grain yield across the environments. The AMMI biplot study indicated that the G8 genotype is the most stable in terms of water stress. The G7 genotype can withstand droughts up to 55% of the available water, while the G8 and G3 genotypes can withstand droughts up to 70% of the available water. Based on all examined traits, this index was used to identify the stable genotypes G7, G8, and G3, which can therefore be suggested for cultivation during drought conditions. Furthermore, we found a positive correlation between the MGIDI, ANOVA, and tolerance index results, indicating that the same desirable genotypes of G7 and G8 were identified by these procedures as being highly tolerant and stable across a range of soil moisture conditions. Based on MGIDI analysis, we can recommend that the G7 genotype exhibits higher grain yield and yield-related traits with the best drought-tolerant indices. [ABSTRACT FROM AUTHOR]

Rice (Oryza sativa L.) stands as a important cereal sustaining over half of the world’s population. This study delves into the challenges confronting breeders in the realm of crop improvement, specifically focusing on the intricate task of designing an ideotype—a genotype amalgamating diverse attributes for optimal performance. Traditional methodologies, exemplified by the Smith–Hazel (SH) index, grapple with issues such as multicollinearity and the complexities of economic weighting decisions. In response to these challenges, the Multi-Trait Genotype–Ideotype Distance Index (MGIDI), conceptualized by Olivoto and Nardino (2021), emerges as a ground breaking approach. Principal Component Analysis (PCA) aids in the reduction of trait dimensionality, revealing four key factors that collectively contribute to 79.444% of total variability. The Scree plot guides factor selection, ensuring a targeted analysis. The MGIDI index computation yields a total genetic gain of 273.025%, with specific traits like spikelet fertility and seedling dry weight exhibiting significant gains. Six high-performing rice accessions—SM227, NLR33892, MTU3626, 239(3), SMB3, and 405C3 were identified through MGIDI. These identified genotypes serve as valuable resources for developing recombinant populations, aligning with sustainable and effective crop improvement strategies. Additionally, these promising varieties exhibit strengths across various traits, offering potential for simultaneous trait improvement in future breeding programmes. The efficiency of MGIDI is highlighted through its innovative application in simultaneous trait selection, underscoring its significance across a wide range of crops.

The Multitrait Genotype Ideotype Distance Index (MGIDI) is a strong and adaptable technique for choosing superior genotypes of diverse crops based on numerous attributes. It is a multivariate selection indicator that incorporates different characteristic information into a single value and ranks genotypes based on their distance from an ideal genotype. Breeders can use variable selection criteria including weighting traits and assessing genetic strengths and weaknesses. It organizes attributes into components and chooses optimal genotypes based on many traits using principal component analysis. This review covered the available information regarding the background, applications, prospects, and limitations of MGIDI for crop improvement and breeding in this research. We discussed the significant discoveries and consequences of several studies that used MGIDI to enhance the productivity, excellence, and flexibility of numerous crops, such as bush yam, barley, cassava, cucumber, guar, lentil, maize, rice, bean, soybean, wheat, etc. Additionally, we talked about some of the potential applications of MGIDI for breeding and crop improvement, such as tolerance to salinity, stability analysis, tolerance to waterlogging, mechanism of drought response, performance in agronomy and tuber quality, nutritional value and productivity, adaptability, increased yield, early maturity, and stress resistance etc. Following the upward trend, MGIDI can be considered as a valuable index technique for selection of crop genotypes that can address food security, climate change, and nutritional quality problems worldwide. We expect that this study will spark more research and use of MGIDI in different crops characteristics, contributing to the improvement of plant breeding science.

Increasing maize production by expanding to marginal areas in the tropics faces substantial challenges, such as drought and acidic soil. Acidic soils may have low availability of plant nutrients because of the soil's low pH and heavy metals. This study aimed to a) elucidate the response of maize genotypes under optimum and acidic soil, b) determine the correlation between several tolerance indices, and c) predict the response to selection performance based on multiple traits. Thirty-six genotypes, including six checks, laid out in an augmented RCBD, had three replications for the checks under optimum and acidic soil conditions in Bogor, Indonesia. Acidic soil induced late flowering and reduced agronomic performance and yield traits. Genotype, environment, and genotype-byenvironment interaction (GEI) had highly significant (P < 0.01) effects on yield and several traits. G05, G15, and G20 were tolerant and high-yielding genotypes evaluated and ranked using tolerance indices. The mean productivity (MP), harmonic mean (HM), geometric mean productivity (GMP), and stress tolerance index (STI) showed significant correlations with yield under both conditions. The multi-trait genotype-ideotype distance index (MGIDI) suggested that genotypes G15 and G20 were better selections in acidic soil, whereas G05's was better in the tolerance index values. Using tolerance indices can help determine the most tolerant genotypes, whereas the multiple-trait index enables researchers to assess the performance of genotypes and identify the most effective traits. These two parameters require recommendations as tools for describing tolerant genotypes in acidic soils in tropical maize breeding programs. [ABSTRACT FROM AUTHOR]

Water deficit stress triggers various physiological and biochemical changes in plants, substantially affecting both overall plant defense response and thus nutritional quality of tomatoes. The aim of this study was to assess the antioxidant defense response and nutritional quality of different tomato genotypes under water deficit stress. In this study, six tomato genotypes were used and subjected to water deficit stress by withholding water for eight days under glass house conditions. Various physiological parameters from leaves and biochemical parameters from tomato fruits were measured to check the effect of antioxidant defense response and nutritional value. Multi-trait genotype-ideotype distance index (MGIDI) was used for the selection of genotypes with improved defense response and nutritional value under water deficit stress condition. Results indicated that all physiological parameters declined under stress conditions compared to the control. Notably, NBH-362 demonstrated resilience to water deficit stress, improving both defense response and nutritional quality which is evident by an increase in proline (16.91%), reducing sugars (20.15%), total flavonoids (10.43%), superoxide dismutase (24.65%), peroxidase (14.7%), and total antioxidant capacity (29.9%), along with a decrease in total oxidant status (4.38%) under stress condition. Overall, the findings suggest that exposure to water deficit stress has the potential to enhance the nutritional quality of tomatoes. However, the degree of this enhancement is contingent upon the distinct genetic characteristics of various tomato genotypes. Furthermore, the promising genotype (NBH-362) identified in this study holds potential for future utilization in breeding programs.

Multi-environment trials (MET) are crucial for selecting genotypes that are well-suited to different environmental conditions. Incorporating multiple traits in the analysis can provide more reliable recommendations for selecting genotypes with desirable traits, including resistance to the Mungbean Yellow Mosaic Virus (MYMV) and high yield potential. The use of a Multi-Trait Stability Index (MTSI) is a good approach for analyzing the stability of genotypes across multiple traits under MYMV stress. In the present investigation, the performance of thirteen green gram genotypes were evaluated for traits such as yield, plant height, number of branches per plant, and resistance to MYMV. The main objective of the study is to identify highly productive and stable mung bean genotypes resistant to MYMV. MTSI can be calculated by combining information on the performance of genotypes across multiple traits and environmental conditions to provide a single index that indicates the overall stability of genotypes across traits and environments. The results helped to identify two green gram genotypes (Yadadri and JNG-18) that were high-yielding with stable resistance to MYMV stress across multiple environmental conditions. This can provide useful information to breeders for the development of suitable genotypes against MYMV in the affected areas.

In Bangladesh, sweet potato holds the fourth position as a crucial carbohydrate source, trailing rice, wheat, and potato. However, locally grown sweet potato varieties often display limited stability and yield. To tackle this challenge, diverse selection methods and statistical models were utilized to pinpoint sweet potato genotypes showcasing both stability and superior yield and quality traits. In the initial two years, multiple selection methods were employed to narrow down the collections based on preferences for yield and its contributing traits. Subsequently, a multi-environment trial (MET) was conducted in the following year to pinpoint superior and stable genotypes with desirable yield and quality characteristics. An integrated approach involving the Multi-Trait Genotype Ideotype Distance Index (MGIDI), Factor Analysis and Ideotype-Design (FAI-BLUP), and Smith-Hazel Index (SH) led to the identification of 71 superior sweet potato genotypes out of a total of 351 in the initial growing season. In the subsequent season, the MGIDI selection index was applied to the 71 genotypes, resulting in the selection of 11 top-performing genotypes. This selection process was complemented by a detailed analysis of the strengths and weaknesses of the selected genotypes. In the MET, the mixed effect model, specifically the linear mixed model (LMM), identified significant genotypic and genotype-environment interaction (GEI) variances. This points to elevated heritability and selection accuracy, ultimately boosting the model's reliability. By combining the strengths of LMM and additive main effects and multiplicative interaction (AMMI), the best linear unbiased prediction (BLUP) index identified H20 as the top-performing genotype for marketable root yield (MRY), H37 for dry weight of root (DW), H8 for beta carotene (BC) and H41 for vitamin c (VC). These genotypes surpassed the overall average in the WAAS index. For simultaneous stability and high performance, the WAASBY index selected H37 for MRY, H6 for DW, H61 for BC, and H3 for VC. Finally, genotypes H3 and H20 were selected using multi-trait stability index (MTSI), as they possessed high performance and stability. Based on the selection sense, the objective has been achieved with regards to the trait MRW, which serves as a major criterion for a superior variety of sweet potato.

Sunflower is the most important oil crop ranked as fourth edible oil in the world. The study was conducted in Northern Ethiopia during 2017–2019 cropping seasons using randomized completely block design with three replications. The objective was to decipher the genotype by environment interaction (GEI) in multi-environment trials (MET) and identify adaptable sunflower genotypes. Combined ANOVA, AMMI ANOVA and Eberhart and Rusell regression were analyzed, and GGE bi-plots, AMMI1 and AMMI2 bi-plots, Principal component Analysis (PCA), multi-trait genotype–ideotype distance index (MGIDI), correlation network plot for sunflower traits were sketched. AMMI stability measures, Best Linear Unbiased Prediction (BLUP) based indexes; parametric and non-parametric statistics were computed using R-statistical software. In the AMMI ANOVA the main effects of the environment (E) (54.18 % SS), genotype (G) (16.9 % SS) and GEI (23.50 % SS) were significant (p

Context: Breeding for early maturity and higher yield is the principal objective in genetic improvement of Indian soybean. Yellow Mosaic Disease caused by Mungbean Yellow Mosaic India Virus (MYMIV) causes 80% yield loss in soybean. Aims: This study aimed to develop early maturing, MYMIV resistant and high yielding soybean genotypes for enhancing soybean production and expanding the land area under cropping. Methods: MYMIV resistance was introgressed from G. soja in to a widely adaptable cultivar JS 335 through a series of four generations of backcrosses and by evaluating derived progeny against MYMIV at a disease hot spot. Key results: An extra-early maturing (71 days) genetic stock called NRC 252 was developed, which can be a potential gene donor in breeding for early maturing soybean varieties. Introgression lines YMV 1, YMV 2, YMV 11 and YMV 16 with MYMIV resistance and higher yield performance over recurrent parent and other check varieties were identified and characterised. Biplot analysis, assessing the main effect of genotype and the interaction of genotype with environment, revealed an ideal genotype with respect to 100-seed weight and grain yield that was also promising under sugarcane-soybean intercropping system in spring season. Conclusions: Alleles from wild type soybean could improve yield attributing traits and MYMIV resistance in cultivated soybean. Improved genotypes such as YMV 1, YMV 2, YMV 11 and YMV 16 were found superior to the recurrent parent JS 335 as well as other check varieties. Implications: The genotypes developed in the present study will help in reducing the damage caused by MYMIV disease and expansion of the area of soybean cultivation through intercropping with sugarcane. Genes conferring economically important traits, like disease resistance, were successfully introgressed from wild type soybean Glycine soja. We developed improved genotypes with resistance to mungbean yellow mosaic India virus, and high grain yield, within the genetic background of a more widely adaptable soybean variety; and developed the earliest-maturing soybean breeding material (71 days). The resulting genotypes are suitable for intercropping with sugarcane and have implications for enhancing soybean production in India. [ABSTRACT FROM AUTHOR]

Multiple abiotic stresses negatively impact wheat production all over the world. We need to increase productivity by 60% to provide food security to the world population of 9.6 billion by 2050; it is surely time to develop stress-tolerant genotypes with a thorough comprehension of the genetic basis and the plant's capacity to tolerate these stresses and complex environmental reactions. To approach these goals, we used multivariate analysis techniques, the additive main effects and multiplicative interaction (AMMI) model for prediction, linear discriminant analysis (LDA) to enhance the reliability of the classification, multi-trait genotype-ideotype distance index (MGIDI) to detect the ideotype, and the weighted average of absolute scores (WAASB) index to recognize genotypes with stability that are highly productive. Six tolerance multi-indices were used to test twenty wheat genotypes grown under multiple abiotic stresses. The AMMI model showed varying differences with performance indices, which disagreed with the trait and genotype differences used. The G01, G12, G16, and G02 were selected as the appropriate and stable genotypes using the MGIDI with the six tolerance multi-indices. The biplot features the genotypes (G01, G03, G11, G16, G17, G18, and G20) that were most stable and had high tolerance across the environments. The pooled analyses (LDA, MGIDI, and WAASB) showed genotype G01 as the most stable candidate. The genotype (G01) is considered a novel genetic resource for improving productivity and stabilizing wheat programs under multiple abiotic stresses. Hence, these techniques, if used in an integrated manner, strongly support the plant breeders in multi-environment trials. [ABSTRACT FROM AUTHOR]

Drought stress constricts crop production around the world. Employing high-yielding cultivars with drought tolerance might be the ideal professional approach to coping with its detrimental outcomes. As a result, the current study was performed to investigate the sensitivity and tolerance of nine wheat genotypes to drought stress. In a randomized block design experiment, nine wheat genotypes were subjected to four water treatments: 100%, 85%, 70%, and 55% of the available water (AW). Four water regimes in two growing seasons were counted as eight environmental zones. The leaf’s water relations and photosynthetic pigment were estimated, as well as growth and yield parameters. Univariate and multivariate statistical approaches, including the new method of multi-trait genotype–ideotype distance (MGIDI), were used for evaluation. The analysis of variance revealed that genotype, environment, and their interactions had a highly significant effect on all traits. The same trend was shown by the additive main effects and multiplicative interaction (AMMI) analysis of variance for grain yield across the environments. The AMMI biplot study indicated that the G8 genotype is the most stable in terms of water stress. The G7 genotype can withstand droughts up to 55% of the available water, while the G8 and G3 genotypes can withstand droughts up to 70% of the available water. Based on all examined traits, this index was used to identify the stable genotypes G7, G8, and G3, which can therefore be suggested for cultivation during drought conditions. Furthermore, we found a positive correlation between the MGIDI, ANOVA, and tolerance index results, indicating that the same desirable genotypes of G7 and G8 were identified by these procedures as being highly tolerant and stable across a range of soil moisture conditions. Based on MGIDI analysis, we can recommend that the G7 genotype exhibits higher grain yield and yield-related traits with the best drought-tolerant indices.

This study aims to select soybean lines with desirable nutraceutical characteristics under specific meteorological conditions in the selection environments. The experiment was conducted during the 2021/2022 harvest at Escola Fazenda, Regional University of the Northwest of the State of Rio Grande do Sul, located in Augusto Pestana- RS, Brazil. The experimental design was augmented blocks, with 27 populations of F2 generation, 118 lines of F5 generation, 70 lines of F8 generation, and 15 soybean cultivars as interim checks, arranged in three replications. The chemical composition of soybeans was evaluated using Near Infrared Spectroscopy - NIRS method to analyze various nutritional components. The IRC050 genotype exhibited a nutraceutical profile characterized by an increment in stearic fatty acid (STEAR) and reduction in fiber (FB) and mineral material (MM) contents. Among the F5 generation, the following genotypes were selected based on their nutraceutical traits: L174F5, L307F5, L322F5, L205F5, L190F5, L196F5, L219F5, L183F5, L301F5, L172F5, L198F5, L182F5, L319F5, L21F5, L188F5, L217F5, L302F5, L315F5, L36F5, L318F5, L211F5, L165F5, L321F5, and L179F5. The indirect selection of genotypes with higher levels of linoleic acid and protein was facilitated using the enzyme peroxidase.

Abstract Background Commonly, several traits are assessed in agronomic experiments to better understand the factors under study. However, it is also common to see that even when several traits are available, researchers opt to follow the easiest way by applying univariate analyses and post-hoc tests for mean comparison for each trait, which arouses the hypothesis that the benefits of a multi-trait framework analysis may have not been fully exploited in this area. Results In this paper, we extended the theoretical foundations of the multi-trait genotype-ideotype distance index (MGIDI) to analyze multivariate data either in simple experiments (e.g., one-way layout with few treatments and traits) or complex experiments (e.g., with a factorial treatment structure). We proposed an optional weighting process that makes the ranking of treatments that stands out in traits with higher weights more likely. Its application is illustrated using (1) simulated data and (2) real data from a strawberry experiment that aims to select better factor combinations (namely, cultivar, transplant origin, and substrate mixture) based on the desired performance of 22 phenological, productive, physiological, and qualitative traits. Our results show that most of the strawberry traits are influenced by the cultivar, transplant origin, cultivation substrates, as well as by the interaction between cultivar and transplant origin. The MGIDI ranked the Albion cultivar originated from Imported transplants and the Camarosa cultivar originated from National transplants as the better factor combinations. The substrates with burned rice husk as the main component (70%) showed satisfactory physical proprieties, providing higher water use efficiency. The strengths and weakness view provided by the MGIDI revealed that looking for an ideal treatment should direct the efforts on increasing fruit production of Albion transplants from Imported origin. On the other hand, this treatment has strengths related to productive precocity, total soluble solids, and flesh firmness. Conclusions Overall, this study opens the door to the use of MGIDI beyond the plant breeding context, providing a unique, practical, robust, and easy-to-handle multi-trait-based framework to analyze multivariate data. There is an exciting possibility for this to open up new avenues of research, mainly because using the MGIDI in future studies will dramatically reduce the number of tables/figures needed, serving as a powerful tool to guide researchers toward better treatment recommendations.

Yield is a complex parameter of rice due to its polygonal nature, sometimes making it difficult to coat the selection process in the breeding program. In the current study, 34 elite rice genotypes were assessed to evaluate 3 locations for the selection of desirable rice cultivars suitable for multiple environments based on genetic diversity. In variance analysis, all genotypes have revealed significant variations (p ≤ 0.001) for all studied characters, signifying a broader sense of genetic variability for selection purposes. The higher phenotypic coefficient of variation (PCV) and genotypic coefficient of variation (GCV) were found for yield-associated characteristics such as the number of grains panicle−1 (GP), panicles hill−1 (PPH), and tillers hill−1 (TILL). All of the characters had higher heritability (greater than 60%) and higher genetic advance (greater than 20%), which pointed out non-additive gene action and suggested that selection would be effective. The most significant traits causing the genotype variants were identified via principal component analysis. In the findings of the cluster analysis, 34 elite lines were separated into 3 categories of clusters, with cluster II being chosen as the best one. The relationship matrix between each elite cultivar and traits was also determined utilizing a heatmap. Based on multi-trait genotype-ideotype distance index (MGIDI), genotypes Gen2, Gen4, Gen14, Gen22, and Gen30 in Satkhira; Gen2, Gen6, Gen7, Gen15, and Gen30 in Kushtia; and Gen10, Gen12, Gen26, Gen30, and Gen34 in Barishal were found to be the most promising genotypes. Upon validation, these genotypes can be suggested for commercial release or used as potential breeding material in crossing programs for the development of cultivars suitable for multiple environments under the future changing climate. [ABSTRACT FROM AUTHOR]

Maize (Zea mays L.) production in tropical equatorial regions faces significant challenges due to agroclimatic and soil fertility variability, necessitating the evaluation of maize hybrid adaptability and phenotypic stability across diverse agroecosystems. This study compares the effectiveness of the additive main effects and multiplicative interaction (AMMI) and multi-trait genotype-ideotype distance (MGIDI) models for identifying superior maize hybrids well-suited to the equatorial climate. Fifteen genotypes, including 13 hybrid candidates and two popular commercial varieties (BISI 2 and NASA 29), were analyzed in 10 distinct environments in Indonesia over three consecutive years (2018–2020). The ANOVA method used in the AMMI model analyzed variance into three major components, with PCA analysis indicating that environments (E), genotypes (G), and their interaction (G × E) had a highly significant effect on yield (p

Multiple abiotic stresses negatively impact wheat production all over the world. We need to increase productivity by 60% to provide food security to the world population of 9.6 billion by 2050; it is surely time to develop stress-tolerant genotypes with a thorough comprehension of the genetic basis and the plant’s capacity to tolerate these stresses and complex environmental reactions. To approach these goals, we used multivariate analysis techniques, the additive main effects and multiplicative interaction (AMMI) model for prediction, linear discriminant analysis (LDA) to enhance the reliability of the classification, multi-trait genotype-ideotype distance index (MGIDI) to detect the ideotype, and the weighted average of absolute scores (WAASB) index to recognize genotypes with stability that are highly productive. Six tolerance multi-indices were used to test twenty wheat genotypes grown under multiple abiotic stresses. The AMMI model showed varying differences with performance indices, which disagreed with the trait and genotype differences used. The G01, G12, G16, and G02 were selected as the appropriate and stable genotypes using the MGIDI with the six tolerance multi-indices. The biplot features the genotypes (G01, G03, G11, G16, G17, G18, and G20) that were most stable and had high tolerance across the environments. The pooled analyses (LDA, MGIDI, and WAASB) showed genotype G01 as the most stable candidate. The genotype (G01) is considered a novel genetic resource for improving productivity and stabilizing wheat programs under multiple abiotic stresses. Hence, these techniques, if used in an integrated manner, strongly support the plant breeders in multi-environment trials.

Background: Commonly, several traits are assessed in agronomic experiments to better understand the factors under study. However, it is also common to see that even when several traits are available, researchers opt to follow the easiest way by applying univariate analyses and post-hoc tests for mean comparison for each trait, which arouses the hypothesis that the benefits of a multi-trait framework analysis may have not been fully exploited in this area. Results: In this paper, we extended the theoretical foundations of the multi-trait genotype-ideotype distance index (MGIDI) to analyze multivariate data either in simple experiments (e.g., one-way layout with few treatments and traits) or complex experiments (e.g., with a factorial treatment structure). We proposed an optional weighting process that makes the ranking of treatments that stands out in traits with higher weights more likely. Its application is illustrated using (1) simulated data and (2) real data from a strawberry experiment that aims to select better factor combinations (namely, cultivar, transplant origin, and substrate mixture) based on the desired performance of 22 phenological, productive, physiological, and qualitative traits. Our results show that most of the strawberry traits are influenced by the cultivar, transplant origin, cultivation substrates, as well as by the interaction between cultivar and transplant origin. The MGIDI ranked the Albion cultivar originated from Imported transplants and the Camarosa cultivar originated from National transplants as the better factor combinations. The substrates with burned rice husk as the main component (70%) showed satisfactory physical proprieties, providing higher water use efficiency. The strengths and weakness view provided by the MGIDI revealed that looking for an ideal treatment should direct the efforts on increasing fruit production of Albion transplants from Imported origin. On the other hand, this treatment has strengths related to productive precocity, total soluble solids, and flesh firmness. Conclusions: Overall, this study opens the door to the use of MGIDI beyond the plant breeding context, providing a unique, practical, robust, and easy-to-handle multi-trait-based framework to analyze multivariate data. There is an exciting possibility for this to open up new avenues of research, mainly because using the MGIDI in future studies will dramatically reduce the number of tables/figures needed, serving as a powerful tool to guide researchers toward better treatment recommendations. [ABSTRACT FROM AUTHOR]

High salinity levels affect 20% of the cultivated area and 9%--34% of the irrigated agricultural land worldwide, ultimately leading to yield losses of crops. The current study evaluated seven salt tolerance-related traits at the seedling stage in a set of 138 pre-breeding lines (PBLs) and identified 63 highly significant marker-trait associations (MTAs) linked to salt tolerance. Different candidate genes were identified in in silico analysis, many of which were involved in various stress conditions in plants, including glycine-rich cell wall structural protein 1-like, metacaspase-1, glyceraldehyde-3-phosphate dehydrogenase GAPA1, and plastidial GAPA1. Some of these genes coded for structural protein and participated in cell wall structure, some were linked to programmed cell death, and others were reported to show abiotic stress response roles in wheat and other plants. In addition, using the Multi-Trait Genotype-Ideotype Distance Index (MGIDI) protocol, the best-performing lines under salt stress were identified. The SNPs identified in this study and the genotypes with favorable alleles provide an excellent source to impart salt tolerance in wheat. [ABSTRACT FROM AUTHOR]

Yield is a complex parameter of rice due to its polygonal nature, sometimes making it difficult to coat the selection process in the breeding program. In the current study, 34 elite rice genotypes were assessed to evaluate 3 locations for the selection of desirable rice cultivars suitable for multiple environments based on genetic diversity. In variance analysis, all genotypes have revealed significant variations (p ≤ 0.001) for all studied characters, signifying a broader sense of genetic variability for selection purposes. The higher phenotypic coefficient of variation (PCV) and genotypic coefficient of variation (GCV) were found for yield-associated characteristics such as the number of grains panicle−1 (GP), panicles hill−1 (PPH), and tillers hill−1 (TILL). All of the characters had higher heritability (greater than 60%) and higher genetic advance (greater than 20%), which pointed out non-additive gene action and suggested that selection would be effective. The most significant traits causing the genotype variants were identified via principal component analysis. In the findings of the cluster analysis, 34 elite lines were separated into 3 categories of clusters, with cluster II being chosen as the best one. The relationship matrix between each elite cultivar and traits was also determined utilizing a heatmap. Based on multi-trait genotype-ideotype distance index (MGIDI), genotypes Gen2, Gen4, Gen14, Gen22, and Gen30 in Satkhira; Gen2, Gen6, Gen7, Gen15, and Gen30 in Kushtia; and Gen10, Gen12, Gen26, Gen30, and Gen34 in Barishal were found to be the most promising genotypes. Upon validation, these genotypes can be suggested for commercial release or used as potential breeding material in crossing programs for the development of cultivars suitable for multiple environments under the future changing climate.

Multi-environment trials (MET) are crucial for selecting genotypes that are well-suited to different environmental conditions. Incorporating multiple traits in the analysis can provide more reliable recommendations for selecting genotypes with desirable traits, including resistance to the Mungbean Yellow Mosaic Virus (MYMV) and high yield potential. The use of a Multi-Trait Stability Index (MTSI) is a good approach for analyzing the stability of genotypes across multiple traits under MYMV stress. In the present investigation, the performance of thirteen green gram genotypes were evaluated for traits such as yield, plant height, number of branches per plant, and resistance to MYMV. The main objective of the study is to identify highly productive and stable mung bean genotypes resistant to MYMV. MTSI can be calculated by combining information on the performance of genotypes across multiple traits and environmental conditions to provide a single index that indicates the overall stability of genotypes across traits and environments. The results helped to identify two green gram genotypes (Yadadri and JNG-18) that were high-yielding with stable resistance to MYMV stress across multiple environmental conditions. This can provide useful information to breeders for the development of suitable genotypes against MYMV in the affected areas., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Hosam O. El-ansary reports financial support was provided by 10.13039/501100002383King Saud University., (© 2024 The Authors.)

Effective management of fertilizers is essential in influencing the prevalence of insects in rice ( Oryza sativa L.) fields. Over two years (2019-20 and 2020-21), an experiment conducted at Bangladesh Rice Research Institute (BRRI), Habiganj, during the boro season aimed to identify the most effective multidimensional treatment (EMT) by testing various combinations of chemical fertilizers and its effect on rice insects. The goal was to optimize rice grain yield while minimizing harmful insect infestation and supporting natural enemies. Eight different chemical fertilizer applications were used as follows: T1 contained a full mix of nitrogen (N), phosphorus (P), potassium (K), and sulfur (S); T2 had PKS but lacked N; T3 had NKS but lacked P; T4 had NPS but lacked K; T5 had NPK but lacked S; T6 had KS but lacked N and P; T7 had PS but lacked N and K; and T8 lacked all four elements - N, P, K, and S. The relationship between the dynamics of harmful insects and natural enemies was highly positively correlated ( r  = 0.72 to 0.97). In two consecutive growing years, the 2020-21 season exhibited notably higher counts of harmful insects, with Rice Leafroller (RLR) dominating in the booting stage and White Backed Planthopper (WBPH) in mid-tillering, while Green Mirid Bug (GMB) prevailed among natural enemies across both stages, surpassing insect pest counts, notably GMB, Lady bird beetle (LBB), Carabid beetle (CDB), and Staphylinid (STD). However, the yield was notably higher in the 2019-20 growing season despite these pest pressures. Throughout the mid-tillering and booting stages, T1 consistently exhibited the highest average populations of harmful insects and natural enemies, while T7 demonstrated the lowest count of harmful insects, followed by T2 at both growth stages. Additionally, the highest grain yield (GY) was consistently recorded in T1, followed by T5, T6, and T3, with yields of 7.98 t/ha, 7.63 t/ha, 7.38 t/ha, and 7.33 t/ha, respectively. In both stages, beneficial insects prevailed over harmful ones in all fertilizer applications, with significant declines noted in T2 and T7. Factor analysis showed successful selection for EMT in the MGIDI index for all variables except INT and GY during the 2019-20 season, with selection differentials (SD) ranging from -0.10 to 8.29. However, in 2020-21, selection was achieved for all variables with SD ranging from 0.37 to 6.08. According to the MGIDI index, the top-ranked EMTs were identified as T4 and T3 for the 2019-20 period, and T3 and T5 for the 2020-21 period. The EMT shared in both years, T3, proved effective because of its positive impact on enhancing natural enemies throughout both periods (with SD ranging from 4.76 to 8.29 for 2019-20 and 3.03 to 6.08 for 2020-21), and its notable contribution to rice grain yield (SD = 0.37) in 2020-21. This study uniquely integrates EMT to optimize rice grain yield while simultaneously managing harmful insect infestations and supporting natural enemies, addressing a critical need in sustainable rice cultivation. The suggestion is to give preference to fertilizer application T3, which omits P but contains N and K, to improve rice grain yield and boost natural enemies, thereby reducing harmful insect infestation. Moreover, future investigations should concentrate on refining fertilizer blends to strike a harmony between maximizing yield and fostering ecological robustness in rice cultivation., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors. Published by Elsevier Ltd.)

In Bangladesh, sweet potato holds the fourth position as a crucial carbohydrate source, trailing rice, wheat, and potato. However, locally grown sweet potato varieties often display limited stability and yield. To tackle this challenge, diverse selection methods and statistical models were utilized to pinpoint sweet potato genotypes showcasing both stability and superior yield and quality traits. In the initial two years, multiple selection methods were employed to narrow down the collections based on preferences for yield and its contributing traits. Subsequently, a multi-environment trial (MET) was conducted in the following year to pinpoint superior and stable genotypes with desirable yield and quality characteristics. An integrated approach involving the Multi-Trait Genotype Ideotype Distance Index (MGIDI), Factor Analysis and Ideotype-Design (FAI-BLUP), and Smith-Hazel Index (SH) led to the identification of 71 superior sweet potato genotypes out of a total of 351 in the initial growing season. In the subsequent season, the MGIDI selection index was applied to the 71 genotypes, resulting in the selection of 11 top-performing genotypes. This selection process was complemented by a detailed analysis of the strengths and weaknesses of the selected genotypes. In the MET, the mixed effect model, specifically the linear mixed model (LMM), identified significant genotypic and genotype-environment interaction (GEI) variances. This points to elevated heritability and selection accuracy, ultimately boosting the model's reliability. By combining the strengths of LMM and additive main effects and multiplicative interaction (AMMI), the best linear unbiased prediction (BLUP) index identified H20 as the top-performing genotype for marketable root yield (MRY), H37 for dry weight of root (DW), H8 for beta carotene (BC) and H41 for vitamin c (VC). These genotypes surpassed the overall average in the WAAS index. For simultaneous stability and high performance, the WAASBY index selected H37 for MRY, H6 for DW, H61 for BC, and H3 for VC. Finally, genotypes H3 and H20 were selected using multi-trait stability index (MTSI), as they possessed high performance and stability. Based on the selection sense, the objective has been achieved with regards to the trait MRW, which serves as a major criterion for a superior variety of sweet potato., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Zakaria Alam reports financial support, administrative support, and equipment, drugs, or supplies were provided by 10.13039/501100005867Bangladesh Agricultural Research Institute, Bangladesh. The International Potato Centre (CIP) in Lima, Peru, arranged the article processing charge (APC) for this manuscript., (© 2024 The Author(s).)

Sunflower is the most important oil crop ranked as fourth edible oil in the world. The study was conducted in Northern Ethiopia during 2017-2019 cropping seasons using randomized completely block design with three replications. The objective was to decipher the genotype by environment interaction (GEI) in multi-environment trials (MET) and identify adaptable sunflower genotypes. Combined ANOVA, AMMI ANOVA and Eberhart and Rusell regression were analyzed, and GGE bi-plots, AMMI1 and AMMI2 bi-plots, Principal component Analysis (PCA), multi-trait genotype-ideotype distance index (MGIDI), correlation network plot for sunflower traits were sketched. AMMI stability measures, Best Linear Unbiased Prediction (BLUP) based indexes; parametric and non-parametric statistics were computed using R-statistical software. In the AMMI ANOVA the main effects of the environment (E) (54.18 % SS), genotype (G) (16.9 % SS) and GEI (23.50 % SS) were significant (p < 0.001). The genotypic Likely-hood Ratio Test revealed significant for all traits. The AMMI bi-plot and the GGE bi-plots selected G10 and G2 as the most adaptable genotypes. CV, HMGV, RPGV, HMRPGV, P i , GAI, KRS, S (3) and S (6) also identified G10 as the most stable genotype. Based on the MGIDI, G10 (MGIDI = 1.45) and G5 (MGIDI = 2.19) are selected and these genotypes are recommended for further cultivation in Tigray., Competing Interests: The authors are composition of researchers and instructor in different disciplines like crop production and protection. These authors contributed in different parts of the research planning, implementation, data collection, data analysis, manuscript drafting and editing. Every member contributed in the research is included in this manuscript. Hence, the authors declare that there are no conflicts of interest. Furthermore, this investigation received no specific fund from any funding agency, commercial or not-for-profit sectors., (© 2024 The Authors. Published by Elsevier Ltd.)

The dataset primarily focused on selecting genotypes of sweet oranges based on their phenotypic performances. The dataset resulted significant variations in the best linear unbiased predictions (BLUPs) of 20 out of 21 traits, including leaves, flowers, fruits, and seeds. A strong positive correlation (r= 0.73 to 0.95) was observed among the majority of morphological traits. The sweet orange genotypes demonstrated considerable genetic variance, surpassing 65% for almost all traits, with a selection accuracy exceeding 92%. Using the multi-trait genotype-ideotype distance index (MGIDI), CS Jain-001 emerged as the top-ranked genotype, followed by BAU Malta-3 and CS Jain-002 in order of desirability. The broad sense heritability of selected traits was above 75.60%, and the selection gain reached a maximum of 12.60. These identified genotypes show promise as potential parent donors in breeding programs, leveraging their strengths and weaknesses to develop promising varieties in Bangladesh., (© 2024 The Author(s).)

Guar, the most popular vegetable, is tolerant of drought and is a valuable industrial crop enormously grown across India, Pakistan, USA, and South Africa for pharmaceutically and cosmetically usable galactomannan (gum) content present in seed endosperm. Guar genotypes with productive traits which could perform better in differential environmental conditions are of utmost priority for genotype selection. This could be achieved by employing multivariate trait analysis. In this context, Multi-Trait Stability Index (MTSI) and Multi-Trait Genotype-Ideotype Distance Index (MGIDI) were employed for identifying high-performing genotypes exhibiting multiple traits. In the current investigation, 85 guar accessions growing in different seasons were assessed for 15 morphological traits. The results obtained by MTSI and MGIDI indexes revealed that, out of 85, only 13 genotypes performed better across and within the seasons, and, based on the coincidence index, only three genotypes (IC-415106, IC-420320, and IC-402301) were found stable with high seed production in multi-environmental conditions. View on strengths and weakness as described by the MGIDI reveals that breeders concentrated on developing genotype with desired traits, such as quality of the gum and seed yield. The strength of the ideal genotypes in the present work is mainly focused on high gum content, short crop cycle, and high seed yield possessing good biochemical traits. Thus, MTSI and MGIDI serve as a novel tool for desired genotype selection process simultaneously in plant breeding programs across multi-environments due to uniqueness and ease in interpreting data with minimal multicollinearity issues.

Yield is a complex parameter of rice due to its polygonal nature, sometimes making it difficult to coat the selection process in the breeding program. In the current study, 34 elite rice genotypes were assessed to evaluate 3 locations for the selection of desirable rice cultivars suitable for multiple environments based on genetic diversity. In variance analysis, all genotypes have revealed significant variations ( p ≤ 0.001) for all studied characters, signifying a broader sense of genetic variability for selection purposes. The higher phenotypic coefficient of variation (PCV) and genotypic coefficient of variation (GCV) were found for yield-associated characteristics such as the number of grains panicle -1 (GP), panicles hill -1 (PPH), and tillers hill -1 (TILL). All of the characters had higher heritability (greater than 60%) and higher genetic advance (greater than 20%), which pointed out non-additive gene action and suggested that selection would be effective. The most significant traits causing the genotype variants were identified via principal component analysis. In the findings of the cluster analysis, 34 elite lines were separated into 3 categories of clusters, with cluster II being chosen as the best one. The relationship matrix between each elite cultivar and traits was also determined utilizing a heatmap. Based on multi-trait genotype-ideotype distance index (MGIDI), genotypes Gen2, Gen4, Gen14, Gen22, and Gen30 in Satkhira; Gen2, Gen6, Gen7, Gen15, and Gen30 in Kushtia; and Gen10, Gen12, Gen26, Gen30, and Gen34 in Barishal were found to be the most promising genotypes. Upon validation, these genotypes can be suggested for commercial release or used as potential breeding material in crossing programs for the development of cultivars suitable for multiple environments under the future changing climate.

Guar, the most popular vegetable, is tolerant of drought and is a valuable industrial crop enormously grown across India, Pakistan, USA, and South Africa for pharmaceutically and cosmetically usable galactomannan (gum) content present in seed endosperm. Guar genotypes with productive traits which could perform better in differential environmental conditions are of utmost priority for genotype selection. This could be achieved by employing multivariate trait analysis. In this context, Multi-Trait Stability Index (MTSI) and Multi-Trait Genotype-Ideotype Distance Index (MGIDI) were employed for identifying high-performing genotypes exhibiting multiple traits. In the current investigation, 85 guar accessions growing in different seasons were assessed for 15 morphological traits. The results obtained by MTSI and MGIDI indexes revealed that, out of 85, only 13 genotypes performed better across and within the seasons, and, based on the coincidence index, only three genotypes (IC-415106, IC-420320, and IC-402301) were found stable with high seed production in multi-environmental conditions. View on strengths and weakness as described by the MGIDI reveals that breeders concentrated on developing genotype with desired traits, such as quality of the gum and seed yield. The strength of the ideal genotypes in the present work is mainly focused on high gum content, short crop cycle, and high seed yield possessing good biochemical traits. Thus, MTSI and MGIDI serve as a novel tool for desired genotype selection process simultaneously in plant breeding programs across multi-environments due to uniqueness and ease in interpreting data with minimal multicollinearity issues. [ABSTRACT FROM AUTHOR]