Search

Background: Careful preoperative planning in revision cases with complex acetabular defects is crucial for optimal surgery outcome. However, in many cases, computed tomography (CT) scans cannot give a clear understanding of the pelvic destruction. Three-dimensional (3D) models-based on CT data can help surgeon in planning of complex acetabular reconstruction. Materials and Methods: We used 3D plaster pelvic models in 17 revision cases. There were 5 patients with Paprosky II C acetabular defects, 2 patients with Paprosky IIIA defects, and 10 patients with Paprosky IIIB defects (3 patients among them with pelvic discontinuity). We used 3D printer and digital 3D models based on CT scan data for 3D models printing. In 3 cases with Paprosky IIIB defects, we implanted custom-made acetabular components with the porous coating, also printed on the 3D printer. Results: In 14 cases, we used trabecular metal (TM) augments with TM cups. In 100% of cases, number and type of planned and used augments were same. In 9 (64.3%) cases, size of planned and used cups was same. In other cases, the difference was not >2 mm. Conclusions: Use of 3D plaster models for the revision hip arthroplasty planning with complex acetabular defects has shown high accuracy in the clear understanding of acetabular bone deficiency.

Background: Conversion from failed bipolar hemiarthroplasty (HA) to total hip arthroplasty (THA) presents a great challenge to orthopedic surgeons for bipolar head removal and cup placement with or without change of femoral stem. Conversion THA after failed bipolar arthroplasty is known to offer both symptomatic and functional improvement. This study evaluates the midterm functional outcome and complications, especially dislocation associated with femoral head diameter, after conversion THA. Materials and Methods: Forty eight hips with the conversion of bipolar HA to THA were followed up for an average 6.2 years (range 2.0–11.5 years). Twenty one hips had conversion surgery to THA using metal-on-metal articulation (28 or 32 mm head). Nine hips used ceramic-on-ceramic (28–40 mm) and eighteen hips used large head metal-on-metal bearing (>40 mm). Outcome was evaluated using Harris Hip Score (HHS) and Western Ontario McMaster Universities Osteoarthritis Index (WOMAC) score. The radiographs were analyzed for evidence of osteolysis and/or loosening. The complications were evaluated, especially dislocation with different femoral head diameter. Results: Average HHS significantly improved from 42 preoperatively to 86 postoperatively and the average WOMAC score also significantly improved from 47 to 22 postoperatively. Radiological evaluation showed all the femoral components were stable. There was one acetabular component loosening, which required revision 9 years after conversion to THA. One dislocation and one recurrent dislocation were recorded in isolated acetabular revision hip; whereas one dislocation, one recurrent dislocation, and one trochanteric nonunion occurred in the hips with revision of both components. All dislocations occurred in hips with a femoral head size of 28 mm (P = 0.052). The cup and femoral head interval length was the most significant factor contributing to dislocation (P = 0.013). Conclusions: Conversion THA after failed bipolar HA offers a reliable pain relief and functional improvement. To prevent dislocation, it is highly recommended to use a larger diameter femoral head, especially where the cup size is big.

Background: Untreated Perthes disease can lead to osteoarthritis by the fourth decade. The treatment is conservative for children 10 years of age at presentation. All patients had limitation of abduction and internal rotation. Eight patients (53.33%) had pain at the hip and 12 patients (80%) had limp. Mean time between diagnosis and corrective surgery was 3 weeks. Results: The evaluation was done using caput index (CI) and epiphyseal quotient (EQ) and articulotrochanteric distance radiologically, range of motion and Harris Hip Score for clinical outcome. All the measurements were carried out on pre- and postoperative X-rays after 3 years followup and compared with the contralateral normal hip. After a mean followup period of 3.4 years, we noted the statistically significant difference between pre- and postoperative values. We noted that all (100%) children in Stage IB, IIA and 50% children in Stage IIB achieved satisfactory results. There was a significant change (P = 0.000) in CI among all the patients after surgery. The final EQ after 3 years of VDRO was 0.606 and was significant (P = 0.0000). Conclusion: In our opinion, based on the encouraging short term radiological and clinical outcomes, VDRO may be regarded as a treatment procedure for late presenting Perthes disease in stage IB, IIA, IIB.

Being one of the most successful surgeries in the history of medicine, the indications for total hip arthroplasty have widened and are increasingly being offered to younger and fitter patients. This has also led to high expectations for longevity and outcomes. Acetabular cup position has a significant impact on the results of hip arthroplasty as it affects dislocation, abductor muscle strength, gait, limb lengths, impingement, noise generation, range of motion (ROM), wear, loosening, and cup failure. The variables in cup position are depth, height, and angular position (anteversion and inclination). The implications of change in depth of center of rotation (COR) are medialized versus anatomical positioning. As opposed to traditional medialization with beneficial effects on joint reaction force, the advantages of an anatomical position are increasingly recognized. The maintained acetabular offset offers advantages in terms of ROM, impingement, cortical rim press fit, and maintaining medial bone stock. The height of COR influences muscle activity and limb lengths and available bone stock for cup support. On the other hand, ideal angular position remains a matter of much debate and reliably achieving a target angular position remains elusive. This is not helped by variations in the way we describe angular position, with operative, radiologic, or anatomic definitions being used variably to describe anteversion and inclination. Furthermore, pelvic tilt plays a major role in functional positions of the acetabulum. In addition, commonly used techniques of positioning often do not inform us of the real orientation of the pelvis on operating table, with possibility of significant adduction, flexion, and external rotation of the pelvis being possibilities. This review article brings together the evidence on cup positioning and aims to provide a systematic and pragmatic approach in achieving the best position in individual cases.

Background: Total hip arthroplasty (THA) is now an increasingly common procedure for people sustaining acetabular fractures. The incidence of acetabular fractures among the elderly population is increasing, and contemporary treatment aims to avoid the risks of prolonged incumbency associated with poor bone stock for fixation or inability to comply with limited weightbearing in this patient group. The concept of acute hip arthroplasty as a treatment for acetabular fracture is, therefore, becoming more topical and relevant. Our systematic review investigates whether THAs for acetabular fractures should be performed acutely, with a short delay, or as a late procedure for posttraumatic osteoarthritis (PTOA) if it develops. Materials and Methods: Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines were followed when undertaking this systematic review. Detailed searches were performed on three different databases, using keywords, such as “acetabular fracture,” “acetabular trauma,” “total hip arthroplasty,” “hip arthroplasty,” and “hip prosthesis.” Studies from 1975 to September 2016 were included in the study. All studies included in the review were independently critically appraised by two of the authors. Results: Forty three studies were included in this review. Only two of them actually compared acute and delayed THAs for acetabular fractures with the rest focusing on one or the other. Results were comparable between acute and late THAs in terms of aseptic loosening, operative time, blood loss, Harris Hip Score, and ability to mobilize postoperatively without aid. Complication rates, however, were much higher in the acute group. Conclusion: Evidence based on this topic is scarce and therefore we have to be cautious about drawing a definitive conclusion. The findings of this systematic review do suggest, however, that acute THAs should be considered in elderly patients, where fixation is not possible, or when their health and ability to rehabilitate are poor. It should also be considered in patients where PTOA is very likely, or where there is already some preexisting degenerative osteoarthritis.

The results of modern cemented and uncemented total hip arthroplasties are outstanding and both systems have their advantages and disadvantages. This paper aims to examine the designs of different types of prostheses, some history behind their development and the reported results. Particular emphasis is placed on cemented stem design and the details of cementing technique.

Total hip arthroplasty (THA) has become one of the most reliable and patient-requested surgical interventions in all medicine. The procedure can be performed using a variety of surgical approaches, but the posterior approach, direct lateral approach, and direct anterior approach are by far the most common across the globe. This article highlights the history and technique for each of these common approaches. A review of outcomes and complications for each approach are also provided. Each approach has its own unique advantages and disadvantages, but all can be safely and successful utilized for THA. Strong, convincing, high-quality studies comparing the different approaches are lacking at this time. Surgeons are therefore recommended to choose whichever approach they are most comfortable and experienced using. Though not described here, THA can also be done using the anterolateral approach (also known as the Watson Jones approach) as well as the two-incision approach. In addition, recently, some surgeons are utilizing the so-called direct superior approach for THA. While these approaches are far less commonly utilized, they are recognized as viable alternatives to traditional approaches.

Biomechanics of the hip joint describes how the complex combination of osseous, ligamentous, and muscular structures transfers the weight of the body from the axial skeleton into the appendicular skeleton of the lower limbs. Throughout history, several biomechanical studies based on theoretical mathematics, in vitro, in vivo as well as in silico models have been successfully performed. The insights gained from these studies have improved our understanding of the development of mechanical hip pathologies such as osteoarthritis, hip fractures, and developmental dysplasia of the hip. The main treatment of end-stage degeneration of the hip is total hip arthroplasty (THA). The increasing number of patients undergoing this surgical procedure, as well as their demand for more than just pain relief and leading an active lifestyle, has challenged surgeons and implant manufacturers to deliver higher function as well as longevity with the prosthesis. The science of biomechanics has played and will continue to play a crucial and integral role in achieving these goals. The aim of this article, therefore, is to present to the readers the key concepts in biomechanics of the hip and their application to THA.

Background Vascular injury during minimally invasive total hip arthroplasty (THA) is uncommon, yet a well-recognized and serious issue. It emerges because of non-visibility of vascular structures proximal to the pelvic bone during reaming, drilling holes, and fixing of screws. Numerous studies have found that screw fixation during cementless THA is beneficial for the initial stability of cup; yet, no anatomical guidelines support angular eccentric screw fixation. Materials and methods In this study, we obtained the pelvic arterial-phase computed tomographic data of thirty eight humans and reconstructed the three-dimensional models of osseous and vessel structures. We performed the surgical simulation to fix these structures with cementless cups and screws with angular eccentricities. Results The effect of screw eccentricities (angular eccentricities of ±17° and ±34°) on the vascular injury was determined. Measurement between screw and adjoining vessels was performed and analyzed statistically to ascertain a comparative risk study for blood vessels that are not visible during surgery. Conclusion Authors similarly discussed the significant absence of appreciation of quadrant systems proposed by Wasielewski et al. on eccentric screws. Adjustment of quadrant systems provided by Wasielewski et al. is required for acetabular implants with eccentric holes for fixation of acetabular screws.

Despite the initial promise of metal-on-metal (MoM) implants as the ideal bearing surface for hip replacements and resurfacings, high short term failure rates due to an adverse reaction to metal debris (ARMD) have led to a dramatic reduction in the number of MoM implants used in the modern era. With over one million patients worldwide having undergone hip operations utilizing a MoM bearing surface, the long term outcomes for such patients remains unknown, and there is much debate as to the most effective management of these patients. Although several regulatory bodies have released guidelines on the management of patients with MoM hips, these recommendations remain open to interpretation, and the most effective management for these patients remains unclear. The aim of this review is to compare the current guidelines for managing patients with MoM hips and also to discuss established ARMD risk factors, evidence regarding the optimum management for patients with MoM hips, and the indications for revision surgery. Furthermore, although specialized laboratory tests and imaging can be used to facilitate clinical decision making, over-reliance on any single tool should be avoided in the decision making process, and surgeons should carefully consider all findings when determining the most appropriate course of action.

Background: Crowe type IV developmental dysplasia of hip (DDH), subtrochanteric shortening osteotomy is required to restore the hip joint. Several approaches have been described for subtrochanteric shortening osteotomy. Several osteotomy fixation techniques have been defined for Crowe type IV DDH. This study evaluates the outcomes of subtrochanteric shortening osteotomy fixed with a combination of split onlay autograft and distal fluted femoral stem. Materials and Methods: A retrospective study was carried out on 41 hips of 37 patients treated with total hip replacement for Crowe type IV developmental dysplasia of the hip by subtrochanteric transverse osteotomy and fixed with split intercalary autograft by two cables. A femoral stem with proximal coated and distally fluted was used. The patients were evaluated at a mean of 34 months (range 12–68 months) for union time, leg equalization, and clinical outcomes. Results: Mean time of union was 13.5 ± 4.6 weeks (range 6–24 weeks). Intraoperative instability of the osteotomy site (n = 16) that was encountered at the trial stage was restored properly by this surgical protocol. Leg length discrepancies were improved to 1.4 ± 0.8 cm (range 0–3 cm). Harris scores were improved from 47.7 ± 10.8 (range 30–68) to 88 ± 5.6 (range 72–98) (P < 0.05) points. There was no nonunion. Conclusions: Distally well-fitted stem and strengthening of fixation with split intercalary autograft promote additional rotational stability and improve bone union.

Background: Poliomyelitis is a viral, nervous system disease that affects both the upper and the lower extremities. The treatment of severe coxarthrosis in these patients with total hip arthroplasty (THA) has been widely questioned because of the high risk of subsequent complications. The aim of the present study was to describe both radiological and medium term clinical results in a series of patients with post polio residual paralysis that underwent THA. Materials and Methods: We report a retrospective review of a series of 5 five patients diagnosed with severe coxarthrosis secondary to post polio residual paralysis who were operated between 2008 and 2012. Uncemented THA was performed in all cases by the same surgeon. Clinical evaluation was carried out using the Harris Hip Score (HHS) at the preoperative visit, at 6 months, and annually after surgery. Results: The median age was 47 years, and the median followup was 55 months (interquartile range P25–P75: range 31–72 months). According to the HHS, a significant clinical improvement was observed in all patients with a median score of 81 points (interquartile range P25–P75: range 74–89) at 1 year of followup. A case of relapsing dislocation that required revision surgery of the implant was recorded. No cases of component loosening were found. Conclusion: THA surgery in patients with post polio residual paralysis is a complex procedure with a significant complication rate, but a predictable clinical improvement may encourage surgeons to perform in patients with severe coxarthrosis and moderate functional expectations.

While total hip arthroplasty remains one of the most reliable procedures with excellent, cost-effective outcomes, there remains controversy in the choice of implant in terms of method of fixation, bearing surface, and size of the femoral head, especially in the younger population. This review looks at the possible information base that surgeons can explore before choosing the implant that they are comfortable with. It also looks at the findings of various registries, which readers can use in the process of informed consent. We have provided certain recommendations with specific reference to the method of fixation, bearing surface, and head size that can be backed by the available registry data. However, the information provided should be used only after considering local, financial, and patient-specific issues that surgeons encounter on a daily basis during their practice.

International audience; The identification of a dysferlin-deficient animal model that accurately displays both the physiological and behavior aspects of human dysferlinopathy is critical for the evaluation of potential therapeutics. Disease progression in dysferlin-deficient mice is relatively mild, compared to the debilitating human disease which manifests in impairment of particular motor functions. Since there are no other known models of dysferlinopathy in other species, locomotor proficiency and muscular anatomy through MRI (both lower leg and hip region) were evaluated in dysferlin-deficient B6.A-Dysf prmd /GeneJ (Bla/J) mice to define disease parameters for therapeutic assessment. Despite the early and progressive gluteal muscle dystrophy and significant fatty acid accumulation, the emergence of significant motor function deficits was apparent at approximately 1 year of age for standard motor challenges including the rotarod, a marble bury test, grip strength, and swimming speed. Earlier observations of decreased performance for Bla/J mice were evident during extended monitoring of overall exploration and rearing activity. Comprehensive treadmill gait analyses of the Bla/J model indicated significant differences in paw placement angles and stance in relation to speed and platform slope. At 18 months of age, there was no significant difference in the life expectancy of Bla/J mice compared to wild type. Consistent with progressive volume loss and fatty acid accumulation in the hip region observed by MRI, mass measurement of individual muscles confirmed gluteal and psoas muscles were the only muscles demonstrating a significant decrease in muscle mass, which is analogous to hip-girdle weakness observed in human dysferlin-deficient patients. Collectively, this longitudinal analysis identifies consistent disease parameters that can be indicators of efficacy in studies developing treatments for human dysferlin deficiency.

Introduction : dans la parésie spastique, l’examen de mouvements actifs isolés ignore la fatigabilité centrale. A la marche, la limitation de flexion active de hanche en phase oscillante peut provenir d’une hyperactivité prédominante du droit fémoral (profil « antérieur »), des extenseurs de hanche (grand fessier/ischio-jambiers, « profil postérieur »), ou d’une hyperactivité mixte. Nous avons exploré les profils de fatigabilité de flexion de hanche en efforts répétés dans l’hémiparésie. Méthode : étude prospective, descriptive sur 18 patients hémiparétiques ayant une amplitudemaximale de flexion active de hanche (FHmax) debout ≥60°, filmés pendant 3 séries de 30 secondes de FHmax répétées genou fléchi (5 minutes de repos entre chaque). Les angles FH et FG (flexion de genou) étaient mesurés toutes les 5 secondes sur capture d’écran (Angle Meter™). A T0 (1er mouvement) et T30 (dernier mouvement), on classait les patients en trois profils selon FG à FHmax, FGFHmax : antérieur (FGFHmax≤95% FHmax), mixte (95%FHmax

International audience; Microarchitecture of trabecular bone is a very important component of bone quality in osteoporosis and a determinant of vertebral fracture in men with low bone mineral density (BMD). In contrast to women, male osteoporosis is, in most cases, secondary. The relationships between microarchitecture and different risk factors have never been evaluated in men. About 152 men with low BMD at the lumbar spine or hip (BMD, T-score < -2.5) were included in this study. Risk factors were: age, BMI, alcohol intake, corticosteroid therapy, hypogonadism, and chronic diseases. Transiliac bone biopsies were obtained and histomorphometry was done on an image analyzer; the following parameters were measured: cortical thickness (Ct.Th), trabecular bone volume (BV/TV), trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N), interconnectivity Index (ICI), star volume of the bone marrow, and strut analysis with node and free-end count. The 50 men with two risk factors had a lower BMD, lower Ct.Th and a significant higher star volume than those with one factor or idiopathic osteoporosis. The 26 men with at least three risk factors, had a lower BMD, a reduction of BV/TV and Ct.Th and a marked disorganization of the trabecular network (increased Tb.Sp, ICI, star volume, and free-end to free-end struts). The prevalence of vertebral fractures was higher in these patients. When the main risk factor was considered, a marked decrease in trabecular bone connectivity was observed in hypogonadic men. In osteoporotic men, higher the number of risk factors, lower the connectivity of trabecular network and higher the vertebral fracture risk.