Search

A multi-instrument study of the regolith of Jezero crater floor units by the Perseverance rover has identified three types of regolith: fine-grained, coarse-grained, and mixed-type. Mastcam-Z, Wide Angle Topographic Sensor for Operations and eNgineering, and SuperCam Remote Micro Imager were used to characterize the regolith texture, particle size, and roundedness where possible. Mastcam-Z multispectral and SuperCam laser-induced breakdown spectroscopy data were used to constrain the composition of the regolith types. Fine-grained regolith is found surrounding bedrock and boulders, comprising bedforms, and accumulating on top of rocks in erosional depressions. Spectral and chemical data show it is compositionally consistent with pyroxene and a ferric-oxide phase. Coarse-grained regolith consists of 1-2 mm well-sorted gray grains that are found concentrated around the base of boulders and bedrock, and armoring bedforms. Its chemistry and spectra indicate it is olivine-bearing, and its spatial distribution and roundedness indicate it has been transported, likely by saltation-induced creep. Coarse grains share similarities with the olivine grains observed in the S & eacute;& iacute;tah formation bedrock, making that unit a possible source for these grains. Mixed-type regolith contains fine-and coarse-grained regolith components and larger rock fragments. The rock fragments are texturally and spectrally similar to bedrock within the M & aacute;az and S & eacute;& iacute;tah formations, indicating origins by erosion from those units, although they could also be a lag deposit from erosion of an overlying unit. The fine and coarse-grained types are compared to their counterparts at other landing sites to inform global, regional, and local inputs to regolith formation within Jezero crater. The regolith characterization presented here informs the regolith sampling efforts underway by Perseverance.Plain Language Summary We used multiple instruments on the Perseverance rover to describe three populations of loose sediments found on the floor of Jezero crater by their grain sizes and chemical compositions. The smallest population has grains that are small sand-sized (80-530 mu m) and a mixture of minerals commonly found on Mars, including pyroxene that is present in local rocks and airborne dust found globally. These grains are the easiest to move by wind, so could have distal regional sources as well. Larger gray grains that are 1-2 mm in size and rounded contain olivine. These grains move along the surface, pushed by the impacts of smaller grains that are lifted by the wind. Their size and composition are very similar to olivine grains found in nearby in-place rocks, indicating that they may have a more local source. Finally, there are larger pieces of rocks that have broken down from the erosion of local in-place rocks over time and mix with the other types of grains. Loose sediments within the Jezero crater described here can be compared to loose sediments studied at other landing sites on Mars to help understand how Jezero sediments are formed and transported.

Answering the question of whether life ever existed on Mars is a key goal of both NASA's and ESA's imminent Mars rover missions. The obfuscatory effects of oxidizing salts, such as perchlorates and sulfates, on organic matter during thermal decomposition analysis techniques are well established. Less well studied are the transformative effects of iron oxides and (oxy)hydroxides, which are present in great abundances in the martian regolith. We examined the products of flash pyrolysis-gas chromatography-mass spectrometry (a technique analogous to the thermal techniques employed by past, current, and future landed Mars missions) which form when the cyanobacteria Arthrospira platensis are heated in the presence of a variety of Mars-relevant iron-bearing minerals. We found that iron oxides/(oxy)hydroxides have transformative effects on the pyrolytic products of cyanobacterial biomolecules. Both the abundance and variety of molecular species detected were decreased as iron substrates transformed biomolecules, by both oxidative and reductive processes, into lower fidelity alkanes, aromatic and aryl-bonded hydrocarbons. Despite the loss of fidelity, a suite that contains mid-length alkanes and polyaromatic hydrocarbons and/or aryl-bonded molecules in iron-rich samples subjected to pyrolysis may allude to the transformation of cyanobacterially derived mid-long chain length fatty acids (particularly unsaturated fatty acids) originally present in the sample. Hematite was found to be the iron oxide with the lowest transformation potential, and because this iron oxide has a high affinity for codeposition of organic matter and preservation over geological timescales, sampling at Mars should target sediments/strata that have undergone a diagenetic history encouraging the dehydration, dihydroxylation, and oxidation of more reactive iron-bearing phases to hematite by looking for (mineralogical) evidence of the activity of oxidizing, acidic/neutral, and either hot or long-lived fluids.

Astrobiology seeks to understand the limits of life and to determine the physiology of organisms in order to better assess the habitability of other worlds. To successfully achieve these goals we require microorganisms from environments on Earth that approximate to extraterrestrial environments in terms of physical and/or chemical conditions. The most challenging of these environments with respect to sample collection, isolation and cultivation of microorganisms are anoxic environments. In this paper, an approach to this challenge was implemented within the European Union's MASE (Mars Analogues for Space Exploration) project. In this review paper, we aim to provide a set of methods for future field work and sampling campaigns. A number of anoxic environment based on characteristics that make them analogous to past and present locations on Mars were selected. They included anoxic sulphur-rich springs (Germany), the salt-rich Boulby Mine (UK), a lake in a basaltic context (Iceland), acidic sediments in the Rio Tinto (Spain), glacier samples (Austria) and permafrost samples (Russia and Canada). Samples were collected under strict anoxic conditions to be used for cultivation and genomic community analysis. Using the samples, a culturing approach was implemented to enrich anaerobic organisms using a defined medium that would allow for organisms to be grown under identical conditions in future physiological comparisons. Anaerobic microorganisms were isolated and deposited with the DSMZ (Deutsche Sammlung von Mikroorganismen und Zellkulturen GmbH) culture collection to make them available to other scientists. In MASE, the selected organisms are studied with respect to survival and growth under Mars relevant stresses. They are artificially fossilized and the resulting biosignatures studied and used to investigate the efficacy of life detection instrumentation for planetary missions. Some of the organisms belong to genera with medical and environmental importance such asYersiniaspp., illustrating how astrobiology field research can be used to increase the availability of microbial isolates for applied terrestrial purposes.

Panoramic camera systems on robots exploring the surface of Mars are used to collect images of terrain and rock outcrops which they encounter along their traverse. Image mosaics from these cameras are essential in mapping the surface geology and selecting locations for analysis by other instruments on the rover's payload. 2‐D images do not truly portray the depth of field of features within an image, nor their 3‐D geometry. This paper describes a new 3‐D visualization software tool for geological analysis of Martian rover‐derived Digital Outcrop Models created using photogrammetric processing of stereo‐images using the Planetary Robotics Vision Processing tool developed for 3‐D vision processing of ExoMars PanCam and Mars 2020 Mastcam‐Z data. Digital Outcrop Models are rendered in real time in the Planetary Robotics 3‐D Viewer PRo3D, allowing scientists to roam outcrops as in a terrestrial field campaign. Digitization of point, line, and polyline features is used for measuring the physical dimensions of geological features and communicating interpretations. Dip and strike of bedding and fractures is measured by digitizing a polyline along the contact or fracture trace, through which a best fit plane is plotted. The attitude of this plane is calculated in the software. Here we apply these tools to analysis of sedimentary rock outcrops and quantification of the geometry of fracture systems encountered by the science teams of NASA's Mars Exploration Rover Opportunity and Mars Science Laboratory rover Curiosity. We show the benefits PRo3D allows for visualization and collection of geological interpretations and analyses from rover‐derived stereo‐images., Earth and Space Science, 5 (7), ISSN:2333-5084

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca 10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.

The Mars Science Laboratory Curiosity rover has been traversing strata at the base of Aeolis Mons (informally known as Mount Sharp) since September 2014. The Murray formation makes up the lowest exposed strata of the Mount Sharp group and is composed primarily of finely laminated lacustrine mudstone intercalated with rare crossbedded sandstone that is prodeltaic or fluvial in origin. We report on the first three drilled samples from the Murray formation, measured in the Pahrump Hills section. Rietveld refinements and FULLPAT full pattern fitting analyses of X-ray diffraction patterns measured by the MSL CheMin instrument provide mineral abundances, refined unit-cell parameters for major phases giving crystal chemistry, and abundances of X-ray amorphous materials. Our results from the samples measured at the Pahrump Hills and previously published results on the Buckskin sample measured from the Marias Pass section stratigraphically above Pahrump Hills show stratigraphic variations in the mineralogy; phyllosilicates, hematite, jarosite, and pyroxene are most abundant at the base of the Pahrump Hills, and crystalline and amorphous silica and magnetite become prevalent higher in the succession. Some trace element abundances measured by APXS also show stratigraphic trends; Zn and Ni are highly enriched with respect to average Mars crust at the base of the Pahrump Hills (by 7.7 and 3.7 times, respectively), and gradually decrease in abundance in stratigraphically higher regions near Marias Pass, where they are depleted with respect to average Mars crust (by more than an order of magnitude in some targets). The Mn stratigraphic trend is analogous to Zn and Ni, however, Mn abundances are close to those of average Mars crust at the base of Pahrump Hills, rather than being enriched, and Mn becomes increasingly depleted moving upsection. Minerals at the base of the Pahrump Hills, in particular jarosite and hematite, as well as enrichments in Zn, Ni, and Mn, are products of acid-sulfate alteration on Earth. We hypothesize that multiple influxes of mildly to moderately acidic pore fluids resulted in diagenesis of the Murray formation and the observed mineralogical and geochemical variations. The preservation of some minerals that are highly susceptible to dissolution at low pH (e.g., mafic minerals and fluorapatite) suggests that acidic events were not long-lived and that fluids may not have been extremely acidic (pH>2pH>2). Alternatively, the observed mineralogical variations within the succession may be explained by deposition in lake waters with variable Eh and/or pH, where the lowermost sediments were deposited in an oxidizing, perhaps acidic lake setting, and sediments deposited in the upper Pahrump Hills and Marias Pass were deposited lake waters with lower Eh and higher pH.

International audience; The artificial mineralization of a polyresistant bacterial strain isolated from an acidic, oligotrophic lake was carried out to better understand microbial (i) early mineralization and (ii) potential for further fossilisation. Mineralization was conducted in mineral matrixes commonly found on Mars and Early-Earth, silica and gypsum, for 6 months. Samples were analyzed using microbiological (survival rates), morphological (electron microscopy), biochemical (GC-MS, Microarray immunoassay, Rock-Eval) and spectroscopic (EDX, FTIR, RAMAN spectroscopy) methods. We also investigated the impact of physiological status on mineralization and long-term fossilisation by exposing cells or not to Mars-related stresses (desiccation and radiation). Bacterial populations remained viable after 6 months although the kinetics of mineralization and cell-mineral interactions depended on the nature of minerals. Detection of biosignatures strongly depended on analytical methods, successful with FTIR and EDX but not with RAMAN and immunoassays. Neither influence of stress exposure, nor qualitative and quantitative changes of detected molecules were observed as a function of mineralization time and matrix. Rock-Eval analysis suggests that potential for preservation on geological times may be possible only with moderate diagenetic and metamorphic conditions. The implications of our results for microfossil preservation in the geological record of Earth as well as on Mars are discussed. Redrawing the history of early life on Earth requires being able to assess if microstructures present in the oldest terrestrial rocks are of biological origin or not. Such assessments are still very challenging mainly due to the degradation of microbial remains during diagenesis and to microbial-like morphologies abiotically produced. Several Archaean rocks could nevertheless be described as ancient unambiguous biological systems, representative of the early-Earth fossil record, like strata of South Africa and Australia containing evidence of phototrophic 1–6 and heterotrophic microbial. To better understand the processes leading to microfossil formation and preservation, artificial mineralization of microorganisms, also called fossilisation, was first undertaken by Oehler and Schopf with the silicification of

The scientific objectives of the ExoMars rover are designed to answer several key questions in the search for life on Mars. In particular, the unique subsurface drill will address some of these, such as the possible existence and stability of subsurface organics. PanCam will establish the surface geological and morphological context for the mission, working in collaboration with other context instruments. Here, we describe the PanCam scientific objectives in geology, atmospheric science, and 3-D vision. We discuss the design of PanCam, which includes a stereo pair of Wide Angle Cameras (WACs), each of which has an 11-position filter wheel and a High Resolution Camera (HRC) for high-resolution investigations of rock texture at a distance. The cameras and electronics are housed in an optical bench that provides the mechanical interface to the rover mast and a planetary protection barrier. The electronic interface is via the PanCam Interface Unit (PIU), and power conditioning is via a DC-DC converter. PanCam also includes a calibration target mounted on the rover deck for radiometric calibration, fiducial markers for geometric calibration, and a rover inspection mirror. Key Words: Mars—ExoMars—Instrumentation—Geology—Atmosphere—Exobiology—Context. Astrobiology 17, 511–541.

Recent orbital and landed missions have provided substantial evidence for ancient liquid water on the martian surface as well as evidence of more recent sedimentary deposits formed by water and/or ice. These observations raise serious questions regarding an independent origin and evolution of life on Mars. Future missions seek to identify signs of extinct martian biota in the form of biomarkers or morphological characteristics, but the inherent danger of spacecraft-borne terrestrial life makes the possibility of forward contamination a serious threat not only to the life detection experiments, but also to any extant martian ecosystem. A variety of cold and desiccation-tolerant organisms were exposed to 40 days of simulated martian surface conditions while embedded within several centimeters of regolith simulant in order to ascertain the plausibility of such organisms’ survival as a function of environmental parameters and burial depth. Relevant amino acid biomarkers associated with terrestrial life were also analyzed in order to understand the feasibility of detecting chemical evidence for previous biological activity. Results indicate that stresses due to desiccation and oxidation were the primary deterrent to organism survival, and that the effects of UV-associated damage, diurnal temperature variations, and reactive atmospheric species were minimal. Organisms with resistance to desiccation and radiation environments showed increased levels of survival after the experiment compared to organisms characterized as psychrotolerant. Amino acid analysis indicated the presence of an oxidation mechanism that migrated downward through the samples during the course of the experiment and likely represents the formation of various oxidizing species at mineral surfaces as water vapor diffused through the regolith. Current sterilization protocols may specifically select for organisms best adapted to survival at the martian surface, namely species that show tolerance to radical-induced oxidative damage and low water activity environments. Additionally, any hypothetical martian ecosystems may have evolved similar physiological traits that allow sporadic metabolism during periods of increased water activity.

Udgivelsesdato: March 25 The nature and concentrations of the local environments in a series of deuterated jarosite (nominally AFe3(SO4)2(OD)6 with A = K, Na, and D3O) samples with different levels of iron and cation vacancies have been determined by 2H MAS NMR spectroscopy at ambient temperatures. Three different local deuteron environments, Fe2OD, FeOD2, and D2O/D3O+, can be separated based on their very different Fermi contact shifts of delta approximate to 237, 70, and 0 ppm, respectively. The FeOD2 group arises from the charge, compensation of the Fe3+ vacancies, allowing the concentrations of the vacancies to be readily determined. Analysis of the 2 H quadrupole interaction indicates that the FeOD2 groups are mobile, undergoing rapid 180 degrees flips on the NMR time scale; the D2O/D3O+ species (located on the A sites) undergo close to isotropic motion, whereas the Fe20D groups are rigid and are hydrogen-bonded to nearby sulfate 0 atoms, with a (Fe)OD-O(S) distance of 2.79(4) angstrom. No evidence for the intrinsic protonation reaction Fe2OH + H3O+ -> Fe2OH2 + H2O is found in the hydronium jarosite, suggesting that this mechanism is not the cause of the anomalous magnetic behavior of this material. The results illustrate that 2H MAS NMR spectroscopy is an excellent probe of the local environments and defects, on the atomic/molecular level, providing information that is complementary to diffraction techniques and that will help to rationalize the magnetic properties of these materials.

International audience; We have investigated how morphological biosignatures (i.e., features related to life) might be identified with an array of viable instruments within the framework of robotic planetary surface operations at Mars. This is the first time such an integrated lab-based study has been conducted that incorporates space-qualified instrumentation designed for combined in situ imaging, analysis, and geotechnics ( sampling). Specimens were selected on the basis of feature morphology, scale, and analogy to Mars rocks. Two types of morphological criteria were considered: potential signatures of extinct life ( fossilized microbial filaments) and of extant life (crypto-chasmoendolithic microorganisms). The materials originated from a variety of topical martian analogue localities on Earth, including impact craters, high-latitude deserts, and hydrothermal deposits. Our in situ payload included a stereo camera, microscope, Mossbauer spectrometer, and sampling device ( all space-qualified units from Beagle 2), and an array of commercial instruments, including a multi-spectral imager, an X-ray spectrometer ( calibrated to the Beagle 2 instrument), a micro-Raman spectrometer, and a bespoke (custom-designed) X-ray diffractometer. All experiments were conducted within the engineering constraints of in situ operations to generate realistic data and address the practical challenges of measurement. Our results demonstrate the importance of an integrated approach for this type of work. Each technique made a proportionate contribution to the overall effectiveness of our "pseudo-payload" for biogenic assessment of samples yet highlighted a number of limitations of current space instrument technology for in situ astrobiology.

Light-toned layered deposits are widespread on Mars in different geographical and geological settings and many different processes have been suggested to explain their formation, including lacustrine, sub-ice volcanism, weathering of basalts, pyroclastic, impact base surge and dust airfall. Interplay between airfall and aeolian processes with groundwater fluctuations leading to episodes of evaporite precipitation, interaction between lacustrine deposition and hydrothermal vents or large mud volcanoes, groundwater upwelling leading to spring deposits precipitation and/or mud volcanoes deposition have been also proposed. In order to contribute to this discussion, we present the recently published results on the Equatorial Layered Deposits (ELDs) of Arabia Terra in Firsoff crater and on the adjacent plateau. We produced a detailed geological map that included a survey of the relative stratigraphic relations and crater count dating. We reconstructed the geometry of the layered deposits and inferred some compositional constraints. We analyzed the sedimentary structures and textures observable at the available scale both inside and outside the craters. ELDs drape and onlap the plateau materials of Late Noachian age while they are unconformably covered by Early and Middle Amazonian units. ELDs show the presence of polyhydrated sulfates. Layer morphologies, albedo, structure, composition and stratigraphic setting enable us to include the ELDs in Firsoff crater and the surrounding plateau in the wider frame of the sulfate-bearing layered deposits seen elsewhere on Mars at the Noachian-Hesperian transition. ELDs found in craters and in the plateau can be distinguished from each other on the basis of basin-scale morphologies (kilometers-thick crater bulges vs 100s meter-thick sheet drape deposits) and local-scale morphologies (rounded shape, sub-circular depressions, raised rims, bowl-shaped appearance and serrated layer vs flat-topped bodies or dune fields with cross stratification). These morphologic differences suggest that genetic processes might at least partly be different, too. In the crater ELDs consist of mounds made of breccia sometimes displaying an apical pit laterally grading into a light-toned layered unit disrupted in a meter-scale polygonal pattern. These units are frequently associated with fissure ridges suggestive of subsurface sources. We interpret the ELDs inside the craters as spring deposits, originated by fluid upwelling through the pathways likely provided by the fractures related to the crater formations, and debouching at the surface through the fissure ridges and the mounds leading to evaporite precipitation. On the plateau, ELDs consist of rare mounds, flat-lying deposits and cross-bedded dune-fields. We interpret these mounds as possible smaller spring deposits, the flat-lying deposits as playa deposits, and the cross-bedded dune-fields as aeolian deposits. Groundwater fluctuations appear to be the major factor controlling ELDs deposition, leading to different depositional environments depending on the physiography of the basin.

We report here hematite-rich concretions observed in the sandstone of the Mesoproterozoic Vindhyan Supergroup of rocks occurring in parts of Bihariya, Uttar Pradesh, northern India. These concretions are similar to `blueberries' from Mars and their terrestrial analogues reported from the Jurassic Navajo Sandstone in Utah, USA. The presence of diagenetically formed hematite concretions gave the first confirmation of the presence of liquid water in the red planet in the past. We report here the detailed morphology, petrography, mineral chemistry, magnetic susceptibility characteristics and spectral radiometric data of hematite-rich concretions observed in the Vindhyan sandstone. These are compared with `blueberries' from Mars and other similar terrestrial analogues reported from different parts of the world. In spite of similarities, these hematite-rich concretions are strikingly distinct in having a nucleus and alternate iron-rich and iron-poor rims unlike other global occurrences. In addition, we document here outcrop scale evidence of possible fluid pathways considered responsible for the development of the concretions.

Processes that operate at planetary surfaces have the potential to record a history of planetary evolution in the form of sedimentary rocks. This is important because our experience on Earth shows that sediments and sedimentary rocks are the dominant archive of high-resolution proxies of present and past tectonic, climatic, and biological processes. Our understanding of the evolution of Earth’s very ancient climate and paleobiological records derives from detailed examination of the mineralogical, textural, and geochemical signatures preserved in the sedimentary rock record. Sedimentary rocks were first recognized on Mars less than a decade ago (Malin and Edgett, 2000). Recent interpretations of data collected by the Mars Express and Mars Reconnaissance Orbiter spacecraft have confirmed the surprising abundance of these sedimentary rocks, the past role of water on the martian surface, and the similarity—in some cases—to sedimentary rocks formed on Earth. Thick sulfaterich deposits invite comparison to terrestrial evaporites (Grotzinger et al., 2005). In other cases, clay-rich strata are interpreted as the terminal deposits of source-to-sink systems with well-developed fluvial networks in the upper reaches of watersheds that date back to a much wetter period in Mars’ earliest history (Ehlmann et al., 2008; Metz et al., 2009). However, these Earth-like depositional systems contrast with other deposits that may be unique in the Solar System: for example, vast terrains as large as Earth’s continents covered by thick veneers of strata that may derive entirely from settling out of wind-transported dust (Bridges et al., 2010). Whatever their origin, it is now clear that the sedimentary rocks of Mars represent a new frontier for research. Mars science is in its golden era of exploration—the past decade of orbiter and landed missions has produced an extraordinary amount of new data relevant to the analysis of sediments and sedimentary rocks, and robust international programs exist for future missions. To help stimulate discussion of these data, the First International Conference on Mars Sedimentology and Stratigraphy was convened in El Paso, Texas, in April 2010. The contents of this white paper represent the most significant findings of the conference, with additional information provided by the coauthors, and focus on seven key questions for future investigation by the sedimentary geology community.

International audience; Executive Summary This report documents the work of the Mid-Range Rover Science Analysis Group (MRR-SAG), which was assigned to formulate a concept for a potential rover mission that could be launched to Mars in 2018. Based on programmatic and engineering considerations as of April 2009, our deliberations assumed that the potential mission would use the Mars Science Laboratory (MSL) sky-crane landing system and include a single solar-powered rover. The mission would also have a targeting accuracy of 7km (semimajor axis landing ellipse), a mobility range of at least 10km, and a lifetime on the martian surface of at least 1 Earth year. An additional key consideration, given recently declining budgets and cost growth issues with MSL, is that the proposed rover must have lower cost and cost risk than those of MSL--this is an essential consideration for the Mars Exploration Program Analysis Group (MEPAG). The MRR-SAG was asked to formulate a mission concept that would address two general objectives: (1) conduct high-priority in situ science and (2) make concrete steps toward the potential return of samples to Earth. The proposed means of achieving these two goals while balancing the trade-offs between them are described here in detail. We propose the name Mars Astrobiology Explorer-Cacher (MAX-C) to reflect the dual purpose of this potential 2018 rover mission. A key conclusion is that the capabilities needed to carry out compelling, breakthrough science at the martian surface are the same as those needed to select samples for potential sample return to document their context. This leads to a common rover concept with the following attributes