Search

The effect of high-pressure treatment (350 MPa, 6 min, 20 °C) combined with sodium chloride (1.5–3.0%) and phosphates (0.25–0.5%) on the texture, water retention, color and thermal properties was assessed in pork meat batters. A principal component analysis was used to identify the relationship between thermal denaturation and the functional properties of pork meat proteins. The hardening effect of high pressure was correlated with the appearance of a high-pressure-induced myofibrillar protein structure. The structure was destabilized by sodium chloride and phosphates, which counteracted the high-pressure effect on pork batter texture. Cooking yield and water-holding capacity were improved by the interaction between sodium chloride and phosphates under pressure. The interaction between high pressure, sodium chloride and phosphates also changed the color of the cooked pork meat batters. The modifications of these technological properties could be related to protein denaturation through the effects of high pressure, salt, phosphates and the appearance of a salt-induced component. Industrial relevance High-pressure treatment can produce low-salt and polyphosphate-free batters due to synergetic effects on texture and water-holding capacity. Moreover, the application of high pressure to meat products at high ionic strength does not affect the products' texture and water binding properties.

The effects of High Pressure (HP) on the solubility, aggregation and sedimentation of calcium-supplemented soybean proteins present in soybean protein isolate (SPI), and protein fractions enriched in β-conglycinin and glycinin were analyzed in this work. Calcium addition (up to 0.0075 mol/L) to soybean protein dispersions (1% w/v - pH 8.0) provoked the formation of insoluble aggregates with a very large size. HP treatments split those particles. The size of the HP-formed aggregates was a function of HP intensity, of calcium concentration and of protein composition of samples. 400 and 600 MPa improved the solubility of calcium-added soybean proteins in the three protein samples assayed. At certain calcium concentrations and HP levels, these soluble proteins were involved in the formation of macroaggregates. The velocity of sedimentation of insoluble proteins in calcium-enriched SPI dispersions decreased markedly after HP treatment. This work provides information that may be useful for the handling of complexes formed from soybean proteins and calcium, in order to obtain species with different characteristics regarding solubility and molecular weight. Industrial relevance: The knowledge provided by this work may promote the use of high pressure in the food industry. Indeed high pressure increases the solubility of calcium-added soybean proteins and, in the case of the insoluble ones, slows down their settling. These features may allow the incorporation of calcium-added soybean proteins to different kinds of enriched drinks. © 2012 Elsevier Ltd. Fil: Añon, Maria Cristina. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina Fil: De Lamballerie, M.. Centre National de la Recherche Scientifique; Francia Fil: Speroni Aguirre, Francisco José. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina

For years, high-pressure processing has been viewed as useful for pasteurizing food while maintaining the quality of fresh food. However, even at moderate pressure, this process is not without effects on food, especially on meat products. These effects are especially important because pressure greater than 400 MPa is generally necessary to achieve efficient microbial inactivation. In this review, recent advances in the understanding of the impacts of high pressure on the overall quality of raw and processed meat are discussed. Many factors, including meat product formulation and processing parameters, can influence the efficiency of high pressure in pasteurizing meat products. It appears that new strategies are applied either (i) to improve the microbial inactivation that results from high pressure while minimizing the adverse effects of high pressure on meat quality or (ii) to take advantage of changes in meat attributes under high pressure. Most of the time, multiple preservation factors or techniques are combined to produce safe, stable, and high-quality food products. Among the new applications of high-pressure techniques for meat and meat-derivative products are their use in combination with temperature manipulation to texturize and pasteurize new meat products simultaneously.

Most studies on functionality of soybean proteins have been made with total protein isolates, with the drawback to limit the knowledge of phenomena due to the important complexity of protein composition. In this study we have tried to better understand the behavior of soy emulsions by using their two partially purified fractions: β-conglycinin (7S) and glycinin (11S). Furthermore, we have assessed the combined effect of temperature (20-60 ºC) and high pressure (0.1-600 MPa) on physicochemical, microstructural and rheological properties of oil-in-water emulsions prepared with 7S or 11S proteins at 7% (w/v). Our results show that 7S and 11S emulsions behaved differently under the combined treatments and that 7S protein was responsible for the global properties of soybean emulsions, whereas 11S proteins exerted a negligible effect. From 400 MPa and at 60 ºC, we have noticed for 7S emulsions an increase of flocculation and gelation, largely confirmed by confocal microscopy due to aggregation between adsorbed and aqueous 7S proteins. Globally we have evidenced that temperature reinforces the effect of high pressure and that the threshold to obtain some changes is 400 MPa. The very different behavior of 7S and 11S proteins in emulsions under treatments could help to orientate their commercial use as function of planed treatments Fil: Puppo, Maria Cecilia. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina Fil: Beaumal, Valérie. Instituto National de Recherches Agronomiques. Biopolymères Interactions Assemblages; Francia Fil: Speroni Aguirre, Francisco José. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina Fil: De Lamballerie, M.. Genie Des Procedes - Environnement - Agro-alimentaire. Genie Des Procedes - Environnement - Agro-alimentaire Sede Oniris; Francia. Centre National de la Recherche Scientifique; Francia Fil: Añon, Maria Cristina. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina Fil: Anton, Marc. Instituto National de Recherches Agronomiques. Biopolymères Interactions Assemblages; Francia

We investigated the influence of pH and osmolarity on the high-pressure-induced gelatinization of waxy corn and waxy rice starches in salt solutions, and the properties of the resulting gels. Gelatinization kinetics, the gel swelling power of starches, their structure and their rheological properties were studied for starch suspensions treated at 500 MPa. Gelatinization took place mostly in the first 15 min of the pressure treatment and both the gelatinization speed and the maximal level of gelatinized starch decreased with increasing osmolarity. pH had a minor influence on gelatinization kinetics differing from one starch to another. The resulting gels appeared as a mix of a gel and starch granules with a higher proportion of native granules with increasing osmolarity. Gel strength and swelling were positively correlated to their proportion of gelatinized starch. Thus, gels with different structures and gelatinization levels can be obtained under pressure depending on pH and osmolarity.

The freezing process at different steps of breadmaking is widely used to improve fresh bread availability for the consumer. The consequences of a freezing step on wheat dough and bread, and the way to reduce its negative impacts have been studied for years. Nevertheless, few works report studies on gluten-free doughs and breads. This work investigates the effect of unfermented frozen dough process on the properties of gluten-free dough and the quality of bread. Rheological oscillation tests showed that viscoelastic properties were unchanged for fresh and thawed doughs. However flow tests exhibit an effect of freezing on consistency index and flow behaviour index. Regarding the quality of bread, gluten-free breads obtained by frozen dough process had lower specific volumes and harder crumbs than conventional gluten-free breads (unfrozen breads). Distribution of gas cells was more homogeneous with a freezing step. Crust colour characteristics were also modified by the freezing step.

The effects of calcium and high pressure (HP) treatment on the thermal properties of soybean proteins were analyzed in soybean protein isolate (SPI), a β-conglycinin-enriched fraction (7SEF), a glycinin-enriched fraction (11SEF), and whey protein concentrate (WPC). For β-conglycinin, the temperature of denaturation (Td) decreased with up to 12.5 mM or 6.2 mM calcium in SPI and 7SEF, respectively. This parameter increased when calcium was more concentrated. The Td of glycinin increased for every assayed calcium concentration. The values of changes in Td (ΔTd) depended on calcium concentration and the proportion of β-conglycinin and glycinin in the samples. Activation energy decreased for glycinin in the presence of calcium. HP treatment promoted denaturation of β-conglycinin and glycinin. Calcium protected both proteins in SPI, 7SEF and 11SEF at 200 MPa, and protected glycinin in SPI and 7SEF at 400 and 600 MPa. Nevertheless, calcium increased the degree of denaturation of β-conglycinin in 7SEF at 600 MPa. In the absence of calcium, partially-HP-denatured polypeptides exhibited the same or lower Td than controls, whereas in its presence, they exhibited higher Tds than their respective controls.

The formulation of gluten-free bread, which will be suitable for patients with coeliac disease, was optimized to provide bread similar to French bread. The effects of the presence of hydrocolloids and the substitution of the flour basis by flour or proteins from different sources were studied. The added ingredients were (1) hydrocolloids (carboxymethylcellulose [CMC], guar gum, hydroxypropylmethylcellulose [HPMC], and xanthan gum), and (2) substitutes (buckwheat flour, whole egg powder, and whey proteins). The bread quality parameters measured were specific volume, dry matter of bread, crust color, crumb hardness, and gas cell size distribution. Specific volume was increased by guar gum and HPMC. Breads with guar gum had color characteristics similar to French bread. Hardness decreased with the addition of hydrocolloids, especially HPMC and guar. Breads with guar gum had the most heterogeneous cell size distribution, and guar gum was therefore selected for further formulations. Bread prepared with buckwheat flour had improved quality: an increased specific volume, a softer texture, color characteristics, and gas-cell size distribution similar to French bread. Bread with 1.9% guar gum (w/w, total flour basis) and 5% buckwheat flour (of all flours and substitutes) mimicked French bread quality attributes.

Salmon fillets were frozen either by pressure shift freezing (PSF, 200 MPa, − 18 °C or 100 MPa, − 10 °C) or by air-blast freezing (ABF, − 30 °C, 1 m/s or 4 m/s) or direct-contact freezing, and then stored at − 20 °C for 6 months. The influence of these treatments on the microstructure of Salmon fillets was studied. The equivalent diameter of the intracellular ice crystals were 14.69 ± 4.11, 5.52 ± 2.11, and 30.65 ± 6.31 μm for the samples subjected respectively to PSF at 100, 200 MPa and ABF (− 30 °C, 4 m/s) after 2 days of storage. Smaller and more regular intracellular ice crystals were observed in fillets frozen by PSF (200 MPa) compared with PSF (100 MPa), ABF and direct-contact frozen ones. Significant differences were observed between the size of the ice crystals obtained after conventional freezing process and PSF. Large and extracellular ice crystals were observed in fillets frozen by ABF (1 m/s) and direct-contact frozen. Minimal changes in the size of ice crystals were observed during a 3 months storage. Industrial relevance This paper compares different freezing methods and subsequent frozen storage with respect to their effect on microstructures of salmon fillets. Pressure shift freezing at 200 MPa was superior to conventional freezing regarding small and regular ice crystal formation. Interestingly, during frozen storage for up to 3 months the high quality product obtained via pressure freezing at 200 MPa could be retained. For longer storage periods lower pressures (100 MPa) seem sufficient to achieve stable ice crystals.

Effects of pressure-shift freezing and/or pressure-assisted thawing on the quality of sea bass muscle were evaluated and compared with conventional (air-blast) frozen and thawed samples. Microstructural analysis showed a marked decrease of muscle cell damage for pressure-assisted frozen samples. According to differential scanning calorimetry (DSC), protein extractability, and SDS-PAGE results, high-pressure treatment (200 MPa) produced a partial denaturation with aggregation and insolubilization of the myosin, as well as alterations of the sarcoplasmic proteins. Only small differences between high-pressure processes (freezing or/and thawing) were registered. High-pressure-treated systems led to a decrease of water holding capacity but differences between high-pressure and conventional methods disappeared after cooking. Muscle color showed important alterations due to high-pressure treatments (increasing L* and b*).

High-pressure processing is finding a growing interest in the food industry. Among the advantages of this emerging process is the ability to favorably freeze and thaw food. This study aims at comparing the effect of different freezing and thawing processes on the quality of Atlantic salmon fillets. Atlantic salmon (Salmo salar) samples were frozen by Pressure-Shift Freezing (PSF, 200 MPa, -18 degrees C) and Air-Blast Freezing (ABF, -30 degrees C, 4 m/s). Samples were stored 1 mo at -20 degrees C and then subjected to different thawing treatments: Air-Blast Thawing (ABT, 4 degrees C, 4 m/s), Immersion Thawing (IMT, 20 degrees C), and Pressure-Assisted Thawing (PAT, 200 MPa, 20 degrees C). Changes in texture, color, and drip loss were investigated. The toughness of the PSF samples was higher than that of the ABF sample. The modification of color was more important during high-pressure process than during the conventional process. The PSF process reduced thawing drip compared with ABF. The presence of small ice crystals in the pressure-shift frozen sample is probably the major reason leading to the reduced drip volumes. The freezing process was generally much more influent on quality parameters than the thawing process. These results show the interaction between freezing and thawing processes on selected quality parameters.

Modifications of emulsifying properties of soybean protein isolates (SPI) by high-pressure processing have been studied. SPI solutions at 10 g/l in two pH conditions: alkaline (pH 8: SPI8) and acidic (pH 3: SPI3) were treated by high-pressure at various pressure levels (200, 400 and 600 MPa for 10 min at 10 °C). Oil-in-water emulsions (30/70) were prepared with untreated and high-pressure treated SPI3 and SPI8. Emulsifying properties (oil droplet size, flocculation, interfacial protein concentration and composition) were evaluated. Pressure processing of SPI8 from 200 MPa induced a reduction of droplet size and an increase of depletion flocculation, not observed with SPI3. Bridging flocculation decreased and percentage of adsorbed proteins increased when pressure was applied, whatever the pH conditions. High-pressure treatment induced more ability to proteins, and particularly β-7S and A-11S polypeptides, to be adsorbed at the oil–water interface. At pH 3, high-pressure processing seemed to improve emulsifying properties that have declined due to acidification.

This study deals with the effect of high pressure [50-500 MPa] and time of treatment [20-900 s] on the reaction between myofibrils and cathepsin D from bovine post mortem meat, using Surface Response Methodology. We shown that every high pressure treatment enhanced activity of cathepsin D as evaluated on haemoglobin as a substrate or on control meat myofibrils. We also put in evidence that cathepsin D could carry out the hydrolysis of high pressure treated myofibrils. At last we studied the action of pressurised cathepsin D on pressurised myofibrils, and proved that the hydrolysis was increasing up to 170 MPa and then decreased; above 300 MPa the activity was lower than with control cathepsin D and control myofibrils. Thus above 300 MPa recognition of natural substrate is affected by high pressure induced modifications. These results may help to explain why high pressure treatment of post rigor meat is not able to increase tenderness.

High pressure treatment is a mild treatment concerning the nutritional characteristics: for instance vitamins content is very few affected by high-pressure treatment. But the impact of high-pressure on protein digestibility remains poorly understood. This work presents effect of high-pressure treatment on in vitro digestibility of meat and lupin proteins. Two high-pressure conditions (200 and 500 MPa 10 min.) and a heat treatment of 95 °C, 30 min were studied. In vitro digestibility was evaluated with a pepsin reaction. Results show than for both type of proteins, samples pressurised at 500 MPa were the most hydrolysed. Meat proteins were less hydrolysed than control either after heat or 200 MPa treatment. Lupin proteins where more hydrolysed than control after heat or 200 MPa treatment. Thus we revealed that high-pressure treatment presents an effect on the in vitro digestibility of proteins, opening a new perspective of investigations.

Myofibrillar proteins were extracted from post rigor bovine meat with a potassium phosphate/potassium chloride buffer. Viscoelastic properties of myofibrillar properties were studied in a 0.6MKCl buffer, at pH = 6, used in an oscillating mode. Enthalpy patterns were determined with a differential scanning calorimeter. SDS PAGE was performed. Results show that high pressure processing denatures myofibrillar proteins, which result in a decrease of myofibrillar protein extractability. Moreover, the viscoelastic properties of myofibrillar extracts are modified by a preliminary high-pressure treatment of meat. The storage modulus (G′) versus temperature graph presents an intermediate peak; the height of this peak and the final value (90°C) are dependant on the level of pressure. Finally, enthalpy and electrophoresis patterns allow us to understand myofibrillar protein modifications induced by high hydrostatic pressure processing of meat.

International audience; Our study focuses on a foodborne pathogen, Campylobacter, which is responsible for the most frequent bacterial enteritis worldwide. Membrane integrity of Campylobacter jejuni NCTC 11168 cells treated at high pressure (300 MPa, 20 degrees C, 10 min) at pH 7.0 and pH 5.6 was measured by fluorescence spectroscopy of propidium iodide (PI) uptake. The percentage of membrane-damaged cells by high pressure, in which PI is allowed to penetrate, was determined using two calibration methods based on the PI fluorescence signal obtained with cells killed either by a heat treatment (80 degrees C for 15 min) or by a pressure treatment (400 MPa, 20 degrees C, 10 min). Both calibrations were shown to be statistically different (P < 0.05), particularly at acidic pH, suggesting that a difference in the penetration of PI into bacterial cells might depend on the mode of cell inactivation. These results corroborate the fact that the mechanism of microbial inactivation by high pressure is pH-dependent.

In the present work the effect of high pressure (HP) treatment in the presence of NaCl on the thermal behavior of soybean proteins was analyzed by differential scanning calorimetry. The thermograms obtained have shown that NaCl addition increased the thermal stability – increase in temperatures of denaturation (Td) – of both glycinin and β-conglycinin. HP treatments increased thermal stability of glycinin, but decreased that of β-conglycinin. High NaCl concentrations decreased (in glycinin) or inverted (in β-conglycinin) the effects of HP on thermal stability. Cooperativity of denaturation of glycinin was enhanced by NaCl and HP. Cooperativity of denaturation of β-conglycinin was enhanced by HP and also by NaCl at 0.2 mol/L but decreased with the combination of treatments. Salt addition increased the enthalpy, ΔH, of denaturation of glycinin and β-conglycinin, being this effect stronger on glycinin. HP treatment provoked the denaturation of both protein fractions. The presence of NaCl protected glycinin against HP-denaturation at any assayed salt concentration and pressure level, while β-conglycinin was only protected at 200 and 400 MPa, but was more denaturated at 600 MPa in the presence of 0.6 mol/L of NaCl. Industrial relevance: The knowledge provided by this work may be useful in the handling of high pressure-treated food with high NaCl content (e.g. meat emulsions, smallgoods) where soybean proteins are used as additives, in order to choose high pressure values to achieve their denaturation or predict the effects of ulterior thermal treatments. Thus, this knowledge may be useful to increase the use of high pressure in food industry. Highlights: ► High pressure treatments denaturated soybean proteins. ► The degree of denaturation achieved by high pressure was modified by NaCl presence. ► Sign and extent of the effects depended on protein nature, NaCl concentration and high pressure level. ► Cooperativity of thermal denaturation was affected by NaCl and previous high pressure treatment. Fil: Añon, Maria Cristina. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina Fil: De Lamballerie, Marie. Genie Des Procedes - Environnement - Agro-alimentaire. Genie Des Procedes - Environnement - Agro-alimentaire Sede Oniris; Francia Fil: Speroni Aguirre, Francisco José. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina

Bacillus sporothermodurans produces highly resistant endospores that can survive ultra-high-temperature treatment in milk. The induction of endospore germination before a heat treatment could be an efficient method to inactivate these bacteria and ensure milk sterility. In this work, the rate of spore germination of B. sporothermodurans LTIS27 was measured in distilled water after high-pressure treatments with varying pressure (50–600 MPa), treatment temperature (20–50 °C), pressure-holding time (5–30 min) and post-pressurization incubation time (30–120 min) at 37 °C or 4 °C. The results showed that pressure-induced germination was maximal (62%) after a treatment at 200 MPa and 20 °C and increased with pressure-holding time and post-pressurization incubation time. Treatment temperature had no significant effect on germination. A central composite experimental design with three factors (pressure, pressure-holding time, and post-pressurization incubation time) using response surface methodology was used to optimize the germination rate in distilled water and in skim milk. No factor interaction was observed. Germination was induced at lower pressure and was faster in milk than in distilled water, but complete germination was not reached. The optimum germination obtained with experimental data was 5.0 log cfu/mL in distilled water and 5.2 log cfu/mL in milk from 5.7 log cfu/mL of spores initially present in the suspension. This study shows the potential of using high hydrostatic pressure to induce the germination of B. sporothermodurans spores in milk before a heat treatment.

The effect of calcium and high-pressure (HP) treatment on the heat gelation of soybean proteins was investigated. In the presence of calcium (2 to 25 mM), the gelation of dispersions of soybean protein isolate (SPI), a beta-conglycinin-enriched fraction (7SEF), and a glycinin-enriched fraction (11SEF) started with protein having a lower degree of denaturation. The gels from these dispersions had greater stiffness than the samples without added calcium. HP treatment had different effects on heat-induced gelation depending on the presence of calcium and on the nature of the proteins. In the absence of calcium, gels with low stiffness were formed after HP treatment, compared with untreated samples, and regardless of the sample type (SPI, 7SEF, 11SEF). In the presence of calcium, gel stiffness was increased after HP treatment of dispersions containing beta-conglycinin (SPI and 7SEF), while the opposite effect was observed for 11SEF. In the presence of calcium, HP treatment promoted a greater contribution of hydrophobic interactions in SPI and 7SEF. In the dispersions containing beta-conglycinin, these conditions also promoted the appearance of a heterogeneous distribution of molecular sizes, from enormous aggregates to dissociated species. Our results suggest that, in the presence of calcium, HP treatment has an opposite effect on the ability of glycinin and beta-conglycinin to participate in the formation of a 3-dimensional network upon heating.

Aim: The influence of environmental (temperature and pH) and biological (strain) parameters on the inactivation of Campylobacter jejuni by high hydrostatic pressure (HHP) was investigated. Methods and Results: Two clinical strains harvested in stationary phase were pressurized at 20°C and 37°C within a range of 50–400 MPa, in a phosphate (pH 7·0) or a citrate phosphate buffer (pH 5·6), for 10 min. Treatment efficiencies were determined by logarithmic comparisons of culturable cells on blood agar before and after treatment. Results were statistically compared using an anova of culturable cells after treatment to evaluate the effect of all factors. At least a 7-log reduction in cell numbers was observed for both strains. The pH and the strains had no effect on HHP treatment at 20°C while at 37°C, both pH and strain influenced significantly the HHP treatment on C. jejuni. Conclusions: The pressure efficacy on C. jejuni eradication was affected by both environmental and biological factors. Significance and Impact of the Study: Depending on the treatment conditions, C. jejuni sensitivity to HHP can significantly vary. The determination of the inactivation treatment by HPP has to be normalized considering the interaction of environmental and biological factors.

International audience; The effect of high-pressure treatment on structural and rheological properties of soybean protein dispersions was studied. A sequential high-pressure/thermal treatment was also analyzed. Dissimilar effects on soy protein isolate (SPI) and the enriched soybean protein fractions: β-conglycinin (βCEF) and glycinin (GEF) were observed. High pressure (600 MPa) promoted βCEF gelation, but did not modify the rheological properties of GEF in spite of its complete denaturation. Pressure treatment also induced the establishment of hydrophobic interactions and disulfide bonds that allowed the formation of soluble high molecular mass aggregates from the different polypeptides of both β-conglycinin and glycinin. Protein strands formation was detected in matrix microstructure of HP-treated SPI and βCEF dispersions in accordance with their rheological behavior of weak gels. In the case of GEF modifications induced by HP in the microstructure (apparition of large granules) were not accompanied by rheological changes. Heating process after HP treatment induced protein gelation. A decrease in the temperature of onset of matrix formation of SPI and βCEF samples was observed. The magnitude of this effect was proportional to the intensity of HP treatment. Contrarily, HP provoked a delay in gelation process of GEF dispersions. During the thermal cycle, previous HP treatment diminished the ability of both soybean globulins to establish hydrophobic interactions on heating and hydrogen bonds on cooling, thus obtaining gels with small elastic modulus.

High pressure processing is a novel food preservation technology, applied for over 15 years in the food industry to inactivate spoilage and pathogenic microorganisms. Many studies have shown the differential resistance of bacterial cells to high pressure. Listeria monocytogenes is a bacterium able to grow at refrigerated temperature and to survive for a long time in minimally processed foods such as raw smoked fish. The freezing process does not cause significant decline of L. monocytogenes. The phase diagram of water under pressure permits a pressure treatment under subzero temperature, without the disadvantages of freezing for food quality. The aim of this study was to estimate if combined effects of pressure and subzero temperature could increase the destruction of L. monocytogenes in buffer and in smoked salmon. We investigated effects of high pressure processing (100, 150, and 200 MPa) combined with subzero temperatures (−10, −14, and −18°C) and pH (7.0 and 4.5). Results showed that the most effective high-pressure treatment to inactivate L. monocytogenes was 200 MPa, −18°C, and pH 4.5. The relevance of pressure holding time and the synergistic effect of pressure coupled with the subzero temperature to inactivate bacteria are highlighted. Modifications of physical properties (color and texture) were a lightening of color and an increase of toughness, which might be accepted by consumers, since safety is increased.

International audience; Processing treatments such as temperature or high pressure (T/HP) can modify the structure and emulsifying properties of soybean protein isolates (SPIs). Few studies concern the processing of previously prepared oil-in-water emulsions stabilized with SPIs. Furthermore, the combined effects of T and HP were not assessed. Consequently, the aim of this study was to better understand the impact of the combined T/HP (T 20-60 degrees C/HP 0.1-600MPa) treatment on physicochemical and rheological properties of emulsions prepared with native SPIs at 7% (w/v). Our results show that the size and aggregation of oil droplets of emulsions prepared with SPI 7% (w/v) solutions are not altered by the combined T/HP treatment. Such emulsions did not flocculate or coalesce. Simultaneously, we observed a significant increase of the apparent viscosity with the intensification of pressure, which was reinforced by temperature. This phenomenon can be attributed to gelation of non-adsorbed soybean proteins facilitated by their high concentration. Furthermore, temperature seems to improve this gelation process but only until 400 MPa. For higher pressure, the combined effect of temperature and pressure conduced to dissociation of the protein aggregates, lowering gelation. This distinct behavior could be used to obtain SPI emulsions with modulated rheological properties.

Calpains (calcium-activated neutral proteases) of sea bass (Dicentrarchus labrax L.) muscle may participate in the degradation of muscle tissue during postmortem storage. These enzymes are regulated by calpastatin, their endogenous specific inhibitor. The objective of this study was to evaluate the changes encountered by the calpain system during the postmortem storage of fish muscle after high-pressure treatment. From 100 MPa, high-pressure treatment of purified calpains results in a loss of their activity as well as in the dissociation of the heterodimeric form. In muscle, the high-pressure processing decreases the initial activity of calpain. This loss in activity may be due to an inactivation by a change of structure. Initial calpastatin activity is not modified by the high-pressure treatment, but it decreases during the storage from the beginning for a treatment at 300 MPa after which calpastatin is stable during 2 d. Therefore, this study also suggests that high-pressure treatment could be a useful way to improve fish flesh quality.

High pressure processing is recently applied in the food industry to inactivate spoilage and pathogenic microorganisms. Bacterial cells exhibit various barosensibility, and the role of pressurization, depressurization and constant pressure stage remain unknown. We investigated the effect of high pressure processing on Salmonella typhimurium and Listeria monocytogenes cells at 400 and 500 MPa respectively in buffer pH 7 at 20 °C. We applied various pressurization/depressurization kinetic rates (1, 5 and 10 MPa/s for pressurization and 250, 20 and 5 MPa/s for depressurization), and various pulse series or pressure holding times. Results show that high pressure pulses reduced linearly the number of bacterial cells according to the product of pressure and time: we defined this product as a Barometric Power (BP). Reduction of both microorganisms increased when holding time increased from 5 to 20 min, and better results were obtained when the rate of pressurization and depressurization were increased.

High-pressure treatment represents a potential method to stabilize microbiologically agricultural raw materials that are sensitive to heat treatments. Low-density lipoproteins (LDL), the main contributors to the exceptional emulsifying properties of yolk, are particularly sensitive to heat treatment. In this study, high-pressure treatments have been performed on LDL, and their impact on LDL physicochemical and emulsifying properties has been assessed. LDL dispersions at two pH levels (pH 3 and 8) were treated at different pressure levels: 200, 400, and 600 MPa at 20 degrees C. LDL dispersion characteristics (solubility, aggregation, and protein denaturation) and LDL emulsifying properties (o/w 30:70 emulsions: droplet size, flocculation, and protein adsorption) of nontreated and high-pressure treated dispersions were compared. Solubility is not altered by high-pressure treatment whatever the pH, whereas aggregation and protein denaturation are drastically enhanced, in particular at pH 8. The effects of these modifications on LDL emulsifying properties are mainly a diminution of the flocculation (depletion and bridging) at this same pH. Finally, it seems that high-pressure treatment combined with an alkaline pH decreases droplet flocculation of LDL dispersions.

Response surface methodology was used to study the simultaneous effect of two independent variables: Pressure [0 – 600 MPa] and Time [0 – 1800 s] according to a central composite design in stars. DSC thermograms of meat proteins extracted from bovine muscle and lupin (Lupinus al-bus) proteins solubilised from commercial meal were analysed to characterise modifications of protein structure leading to its denaturation to some extent by given particularly the temperature of denaturation Td and the overall enthalpy OH. Results show that the increase of high pressure treatment from 100 MPa induces a decrease of total enthalpy of both types of proteins. However the drop of the enthalpy presents different characteristics depending on protein. Each proteins system indeed reacts in a different way according to its composition.

During the ageing (acquisition of beef meat tenderness) several enzymatic systems are involved. Among them, the lysosomal enzymes, i.e. cathepsins and specially the cathepsin D, are responsible for the myofibrillar proteins alterations. Previous results have shown, after high pressure treatment of post rigor beef meat, an important increase of the toughness of meat, in spite of an increase of the cathepsin D activity was also observed. The aim of this work was to determine if the application of a high pressure treatment modified the reaction between cathepsin D and its natural substrate (myofibrils) The pressurization of cathepsin D does not modify its active site as the electrophoretic patterns and the amount of myofibrillar solubilised proteins were similar to the control. The HP treatment does not perturb the recognition between the enzyme and its natural substrate.

Response surface methodology was used to study the simultaneous effect of two independent variables: Pressure [0-600 MPa] and Time [0-1800s] according to a central composite design in stars. The significant responses were the surface hydrophobicity, the ratio-SHfree/- SHtotal and the flowing properties. Surface hydrophobicity was determined using 1- anilinonaphtalene-8 sulfonate (ANS) as hydrophobic fluorescence probe. The ratio-SHfree/- SHtotal was determined using the 5-5'-Dithiobis-2-nitrobenzoic acid. Flowing properties (flow index and viscosity coefficient) of solutions were stemmed from modelised flow curves performed with a rheometer AR1000. Results show that high pressure treatment induces an increase of the surface hydrophobicity of myofibrillar proteins (x3) from 0 MPa to 440 MPa, and from 450 MPa to 600 MPa the surface hydrophobicity is stable.TThe same trend are obtained with the sulfhydryl interactions and the rheological index n. The viscosity coefficient K decreases with the increase of pressure: the viscosity decreases in relation to a change of structure of the proteins. The statistical analysis of response show that the most important significant effects are the pressure and its quadratic effect compared with the effect of time.

This study evaluated the potentiality of high-pressure treatment to stabilise microbiologically emulsions made with yolk without causing destabilisation and gelation. The effects of two levels of treatment (200 or 500 MPa) on the properties (oil droplet size, interfacial protein concentration and composition), the rheology, and the microbiology of yolk emulsions prepared at two pH values (3.0 and 7.0) were determined. Our results showed that, oil droplet size, interfacial protein concentration and composition were not altered by the high-pressure treatments. The rheological study demonstrated that high-pressure treatment induced a significant increase of viscosity in emulsions prepared at pH 7.0, whereas no obvious thickening was noticed in emulsions prepared at pH 3.0. Furthermore, as the protein concentration increased, the effect of high-pressure was more pronounced. Microbial analysis revealed that high-pressure treatment allowed an efficient reduction of the microbial charge of emulsions and that this effect was better at acidic pH than at neutral pH. Consequently, high-pressure treatment could be used to stabilise yolk emulsions in acidic conditions.

The effects of pressure treatment (520 MPa for 260 s at 10°C) on lysosomal enzyme activities, Warner–Bratzler (WB) shear values and physico-chemical parameters of post-rigor (day 2) beef (Biceps femoris and Longissimus dorsi muscles) were investigated immediately after treatment and during ageing. Activities of cathepsin D and acid phosphatase in pressurised meat samples were higher than in controls at 2 days post-mortem and throughout storage. This increase in activities was related to the breakdown of the lysosomal membrane and/or to enzyme activation. The WB peak forces were higher for pressurised samples of both muscles at 2 days than in the control and remained higher throughout ageing. The WB shear force deformation curves from pressurised samples showed that the increase in toughness was due to the increase in shear force of the myofibrillar component and not the collagen component. Pressurised muscle led to a significant decrease in sarcomere length and higher cooking loss. Post-rigor application of high pressure induced higher catheptic activity but no conclusive effect on the post-mortem rate of tenderization or tenderness of meat was observed.