Search

Numerical simulations are required to thermophysically characterize Oxia Planum, the landing site of the mission ExoMars 2022. A drilling system is installed on the ExoMars rover, and it will be able to analyze down to 2 meters in the subsurface of Mars. The spectrometer Ma_MISS (Mars Multispectral Imager for Subsurface, Coradini and Da Pieve, 2001) will investigate the lateral wall of the borehole generated by the drill, providing hyperspectral images. It is not fully clear if water ice can be found in the subsurface at Oxia Planum. However, Ma_MISS has the capability to characterize and map the presence of possible ices, in particular water ice. We performed simulations of the subsurface temperatures by varying the thermal inertia, and we quantified the effects of self-heating. Moreover, we quantified the heat released by the drilling operations, by exploring different frictional coefficients and angular drill velocities, in order to evaluate the lifetime of possible water ice.

Hydrothermal processes in impact environments on water-rich bodies such as Mars and Earth are relevant to the origins of life. Dawn mapping of dwarf planet (1) Ceres has identified similar deposits within Occator crater. Here we show using Dawn high-resolution stereo imaging and topography that Ceres’ unique composition has resulted in widespread mantling by solidified water- and salt-rich mud-like impact melts with scattered endogenic pits, troughs, and bright mounds indicative of outgassing of volatiles and periglacial-style activity during solidification. These features are distinct from and less extensive than on Mars, indicating that Occator melts may be less gas-rich or volatiles partially inhibited from reaching the surface. Bright salts at Vinalia Faculae form thin surficial precipitates sourced from hydrothermal brine effusion at many individual sites, coalescing in several larger centers, but their ages are statistically indistinguishable from floor materials, allowing for but not requiring migration of brines from deep crustal source(s)., Dawn mission’s second extended phase provided high resolution observations of Occator crater of the dwarf planet Ceres. Here, the authors show stereo imaging and topographic maps of this crater revealing the influence of crustal composition on impact related melt and hydrothermal processes, and compare features to those on Mars, Earth and the Moon.

Ceres is the largest body in the Main Belt, and it is characterized by a large abundance of water ice in its interior. This feature is suggested by its relatively low bulk density (2162 kg m−3), while its partial differentiation into a rocky core and icy crust is suggested by several geological and geochemical features: minerals and salts produced by aqueous alteration, icy patches on the surface, and lobate morphology interpreted as surface flows. In this work, we explore how the composition can influence the characteristics of thermal convection in the crust of Ceres. Our results suggest that the onset of thermal convection is difficult and when it occurs, it is short lived, which could imply that Ceres preserved deep liquid until present, as recently suggested by the work of Castillo-Rogez et al. Moreover, cryovolcanism could be driven by diapirism (chemical convection) rather than thermal convection.

The Ma_MISS spectrometer is integrated within the drilling system of the Rosalind Franklin ExoMars rover. This paper reports the on-ground calibration campaign performed on the spectrometer. Here, we focus on the spectral calibration of the instrument. The experimental setup used to carry out calibration is described, and the methods used for data processing and key parameters retrieval are explained. In particular, the spectral parameters such as (i) pixel central wavelengths, (ii) spectral response function, (iii) spectral resolution, (iv) sampling, and (v) range are determined. In a follow-up paper, the linearity and radiometric calibrations are described, while in De Sanctis et al. [Planet. Sci. J. 3, 142 (2022)], the validation of spectral measurements performed on synthetic and natural rock targets is presented.

We analyzed the surface of Vesta at visible wavelengths, using the data of the Visible and InfraRed mapping spectrometer (VIR) on board the Dawn spacecraft. We mapped the variations of various spectral parameters on the entire surface of the asteroid, and also derived a map of the lithology. We took advantage of the recent corrected VIR visible data to map the radiance factor at 550 nm, three color composites, two spectral slopes, and a band area parameter relative to the 930 nm crystal field signature in pyroxene. Using the howardite-eucrite-diogenite (HED) meteorites data as a reference, we derived the lithology of Vesta using the variations of the 930 nm and 506 nm (spin-forbidden) band centers observed in the VIR dataset. Our spectral parameters highlight a significant spectral diversity at the surface of Vesta. This diversity is mainly evidenced by impact craters and illustrates the heterogeneous subsurface and upper crust of Vesta. Impact craters also participate directly in this spectral diversity by bringing dark exogenous material to an almost entire hemisphere. Our derived lithology agrees with previous results obtained using a combination of infrared and visible data. We therefore demonstrate that it is possible to obtain crucial mineralogical information from visible wavelengths alone. In addition to the 506 nm band, we identified the 550 nm spin-forbidden one. As reported by a laboratory study for synthetic pyroxenes, we also do not observe any shift of the band center of this feature across the surface of Vesta, and thus across different mineralogies, preventing use of the 550 nm spin-forbidden band for the lithology derivation. Finally, the largest previously identified olivine rich-spot shows a peculiar behavior in two color composites but not in the other spectral parameters., Comment: 23 pages, 11+7 figures

The identification of NH4-bearing phyllosilicates on Ceres poses the question on the NH4-carrier phase(s) and in this study we describe the laboratory production and IR spectroscopic measurements of a suite of ten NH4-phyllosilicates, starting from the corresponding NH4-free minerals. For each mineral, we prepared three types of powder samples: raw (R), ammoniated (A), and leached (L). All samples have been spectrally characterized by means of visible/infrared spectroscopy in the INAF-IAPS laboratories with the FieldSpec Pro in the 0.35–2.5 µm range, and with the FT-IR, using a Vertex 80 spectrometer operating in the range of 2–14 µm. The samples were also measured with the SPectral IMager, an imaging spectrometer operating in the spectral range 0.2–5.1 µm, which is a replica of the VIR spectrometer on-board Dawn spacecraft. Reflectance spectra of the ammoniated clays show bands near 1.56 µm, 2.05 µm, 2.12 µm, 3.06 µm, 3.25 µm, 3.55 µm, 4.2 µm, 5.7 µm and 7.0 µm that are related to the presence of nitrogen complexes. Treatment of phyllosilicates with ammonia shows that different minerals behave in different ways: NH4+ ions are easily accepted by the smectites, while other non-expandable structures do not accept these ions. The obtained results can be used to better constrain the NH4-bearing species present on Ceres and, possibly, other bodies of the solar system.

At the beginning of the Ceres investigation, the Dawn-NASA mission discovered a large bright spot (BS) in the Occator crater floor. Several other smaller bright spots were discovered during the following phases of the mission. In this paper, a complete survey for the detection of BS on the Ceres surface have been made by using the hyperspectral data acquired by Visible and Infrared Mapping Spectrometer (VIR). The hyperspectral images span the spectral range from 0.2 to 5 μm, by using two channel, the VIS channel with a spectral sampling of 1.8 nm and a IR channel with a spectral sampling of 9.8 nm. Finally a catalogue of 92 BS has been compiled and their compositional properties have been examined. In particular, five spectral parameters have been applied to perform the analysis: the photometrically corrected reflectance and four band depths, related to spectral absorptions at 2.7 μm (OH fundamental indicative of phyllosilicates), at 3.05 μm (due to ammoniated clays), at 3.4 and 4.0 μm (carbonate overtones). The 90% of BS are impact-related features (ejecta, crater rim, crater floor, crater wall). The two brightest BS, Cerealia and Vinalia Faculae, are located on the Occator crater floor. Most of BSs show features similar to the average Ceres surface, which has low reflectance and is composed of Mg-phyllosilicates and ammoniated clays, with a reduced abundance of Mgsbnd Ca carbonates. Cerealia and Vinalia Faculae are a peculiar BS family, with a high abundance of Na-carbonates and Al-rich phyllosilicates. Oxo and a companion bright spot represents a third category, depleted in phyllosilicates and with a high to moderate albedo. Carbonate composition ranges from Mg/Ca to Na components. Haulani, Ernutet, Kupalo, and other two BS's represent another group, with intermediate properties between the typical BS and the Oxo family: they are moderately rich in carbonates and slightly depleted in Mg- and ammoniated phyllosilicates. The four families probably explain a single evolutionary path followed by the BS from the formation to their maturity: initially the very fresh bright spots would possess characteristics similar to Cerealia and Vinalia Faculae; with time, salts and OH volatilize and a light mixing with surrounding material would produce Oxo-like BS's; additional strong mixing would form Haulani-like BS, which finally become a typical bright spots.

Occator Crater on dwarf planet Ceres hosts the so-called faculae, several areas with material 5 to 10 times the albedo of the average Ceres surface: Cerealia Facula, the brightest and largest, and several smaller faculae, Vinalia Faculae, located on the crater floor. The mineralogy of the whole crater is analyzed in this work. Spectral analysis is performed from data of the VIR instrument on board the Dawn spacecraft. We analyse spectral parameters of all main absorption bands, photometry, and continuum slope. Because most of the absorption features are located in a spectral range affected by thermal emission, we developed a procedure for thermal removal. Moreover, quantitative modeling of the measured spectra is performed with a radiative transfer model in order to retrieve abundance and grain size of the identified minerals. Unlike the average Ceres surface that contains a dark component, Mg-Ca-carbonate, Mg-phyllosilicates, and NH4-phyllosilicates, the faculae contain mainly Na-carbonate, Al-phyllosilicates, and NH4-chloride. The present work establishes unambiguously the presence of NH4-chloride thanks to the high-spatial resolution data. Vinalia and Cerealia Faculae show significant differences in the concentrations of these minerals, which have been analyzed. Moreover, heterogeneities are also found within Cerealia Facula that might reflect different deposition events of bright material. An interesting contrast in grain size is found between the center (10-60 μm) and the crater floor/peripheral part of the faculae (100-130 μm), pointing to different cooling time of the grains, respectively faster and slower, and thus to different times of emplacement. This implies the faculae formation is more recent than the crater impact event, consistent with other observations reported in this special issue. For some ejecta, we derived larger concentrations of minerals producing the absorption bands, and smaller grains with respect to the surrounding terrain. This may be related to heterogeneities in the material pre-existent to the impact event.

An essential part of the Exomars 2022 payload is the Mars Multispectral Imager for Subsurface Studies (Ma_MISS) experiment hosted by the drill system. Ma_MISS is a visible and near-infrared (0.4–2.3 μm) miniaturized spectrometer with an optical head inside the drill tip capable of observing the drill borehole with a spatial resolution of 120 μm. Here we report on how the Ma_MISS hyperspectral information provides in situ investigation of the subsurface at very fine resolution, prior to the collection of the samples that will be manipulated and crushed for further analysis by the analytical laboratory on the rover. Ma_MISS is the instrument that will closely investigate the subsurface mineralogical characteristics in its original geologic context at depths never reached before in Mars exploration. Ma_MISS recognizes all the major spectral features of the clays, basaltic, and minor phases expected at the ExoMars landing site, Oxia Planum. The high spatial resolution on the borehole wall is such that single grains of about 100 μm can be distinguishable in the assemblage of minerals observed by Ma_MISS. The spatial distribution of the mineralogies within the borehole walls is associated with the rocks and the processes that put these materials in place and possibly altered them with time, characterizing the habitats found in the stratigraphic record, indicating which ones are the most suitable to have held or to be holding nowadays traces of life.

We present new spectral observations using ground-based telescopes of 23 putative V-type asteroids, selected according to colour surveys in the visible from the Moving Objects Catalogue of the Sloan Digital Sky Survey and near-infrared from the Moving Objects VISTA catalogue. 10 asteroids are orbiting in the middle main belt, while five in the outer part of the main asteroid belt. For the observed asteroids, we assign a taxonomical classification and confirm the basaltic nature for 16 of them. The high-quality spectra in the UV range, obtained with the X-Shooter spectrograph at ESO, allowed the identification of the Fe2+ forbidden transition of pyroxene for 10 asteroids. This band is centred at 506.5 nm, and it is diagnostic of the Ca-content in the pyroxene form. We determined a low Fe-content composition for asteroids (2452) Lyot, (5758) Brunini, (7675) Gorizia, (9197) Endo, (22308) 1990 UO4, (36118) 1999 RE135, (66905) 1999 VC160, and (189597) 2000 WG119, and a composition more rich in Fe for asteroids (75661) 2000 AB79 and (93620) 2000 UQ70. We also present a dynamical investigation of V-type asteroids in the middle and outer main belt. The principal finding of these simulations is that the middle and outer V-types are more likely to be associated with some families, which were considered as possibly originated from the break up of a partially or totally differentiated parent body by diverse studies. This reinforces the hypothesis that the identified V-type in the region were not originated from (4) Vesta and that the number of differentiated objects in the middle and outer main belt must have been much larger than previously assumed.

We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrated radiance factor at 550 nm, with two color composites and three spectral slopes between 400 and 950 nm. We have made these maps available for the community via the Aladin Desktop software. Ceres surface shows diverse spectral behaviors in the visible range. The color composite and the spectral slope between 480 and 800 nm highlight fresh impact craters and young geologic formations of endogenous origin, which appear bluer than the rest of the surface. The steep slope before 465 nm displays very distinct variations and may be a proxy for the absorptions caused by the $O_2^{-}$ -> $Fe^{3+}$ or the $2Fe^{3+}$ -> $Fe^{2+} + Fe^{4+}$ charge transfer, if the latter are found to be responsible for the drop in this spectral range. We notice several similarities between the spectral slopes and the abundance of phyllosilicates detected in the infrared by the VIR, whereas no correlation can be clearly established with carbonate species. The region of the Dantu impact crater presents a peculiar spectral behavior (especially through the color and the spectral slope before 465 nm) suggesting a change in composition or in the surface physical properties that is not observed elsewhere on Ceres., 22 pages, 14 + 5 figures. Published online on Astronomy and Astrophysics on 07-10-2020

The European Space Agency’s Rosetta mission1 has acquired unprecedented measurements of the surface of the nucleus of comet 67P/Churyumov–Gerasimenko (hereafter, 67P), the composition of which, as determined by in situ and remote-sensing instruments, including the VIRTIS instrument2, seems to be an assemblage of ices, minerals and organic material3. We performed a refined analysis of infrared observations of the nucleus of 67P carried out by the VIRTIS-M hyperspectral imager. We find that the overall shape of the infrared spectrum of 67P is similar to that of other carbon-rich outer Solar System objects, suggesting a possible genetic link with them. More importantly, we also confirm the complex spectral structure of the wide 2.8–3.6 µm absorption feature populated by fainter bands. Among these, we unambiguously identify the presence of aliphatic organics by their ubiquitous 3.38 µm, 3.42 µm and 3.47 µm bands. This infrared detection of aliphatic species on a cometary surface has strong implications for the evolutionary history of the primordial Solar System and is evidence that comets provide an evolutionary link between interstellar material and Solar System bodies4. A refined analysis of infrared observations of comet 67P/Churyumov–Gerasimenko from the VIRTIS instrument on board the Rosetta spacecraft has revealed the presence of aliphatic organic molecules on the comet nucleus.

We present an analysis of the areal distribution of spectral parameters derived from the VIR imaging spectrometer on board NASA/Dawn spacecraft. Specifically we studied the Occator quadrangle of Ceres, which is bounded by latitudes 22°S to 22°N and longitudes 214°E to 288°E, as part of the overall study of Ceres’ surface composition reported in this special publication. The spectral parameters used are the photometrically corrected reflectance at 1.2 µm, the infrared spectral slope (1.1–1.9 µm), and depths of the absorption bands at 2.7 µm and 3.1 µm that are ascribed to hydrated and ammoniated materials, respectively. We find an overall correlation between 2.7 µm and 3.1 µm band depths, in agreement with Ceres global behavior, and band depths are shallower and the spectral slope is flatter for younger craters, probably due to physical properties of regolith such as grain size. Spectral variations correlated with the tali geological unit also suggest differences in physical properties. The deepest band, indicating enrichment of ammoniated phyllosilicates, are associated with ejecta generated by impacts that occurred in southern quadrangles. The most peculiar region of this quadrangle is the Occator crater (20°N 240°E). The internal crater area contains two faculae, which are the brightest areas on Ceres due to exposure of sodium carbonates, and by two types of ejecta, dark and bright, with different spectral properties, probably due to different formation, evolution or age.

This article presents the spectral parameter maps used in this Surface Composition of Ceres Special Issue. The definition and use of spectral parameters has always played a fundamental role in understanding the properties and composition of a planetary surface. Mapping proper spectral parameters shows the global mineralogical diversity across Ceres. In this work, we discuss the production process of Ceres spectral parameter maps derived by the data of the Visible and Infrared mapping spectrometer (VIR) onboard NASA’s Dawn mission. We describe the data processing of the VIR spectra and the procedure to retrieve the geometries (latitude, longitude and illumination angles) of the acquired data. Spectra and geometries are used to project and mosaic this data to produce Geographic Information System-compatible spectral parameters maps of Ceres. An overview of the variability of the data across the quadrangles is given, addressing the specific analysis to each quadrangle mapping paper included in this special issue.

The dwarf planet Ceres is a heavily cratered rocky body, and complex craters with a central peak are widely observed on its surface. These types of craters form when a large body impacts the surface, generating extreme temperatures and pressures. During the impact event a large volume of rock is raised from the subsurface and a central uplift is formed. The material composing the central uplift is called crater central peak material (ccp) and the spectral analysis of such geologic areas can provide information about the composition of Ceres’ subsurface. Reflectance spectra of 32 ccps, acquired by the VIR spectrometer on board the NASA/Dawn spacecraft, were analyzed and shows absorption bands located at about 2.7, 3.1, 3.4 and 4.0 µm which are also common on the Cerean surface. These absorptions are related, respectively, to Mg-phyllosilicates, NH4-phyllosilicates and Mg/Ca-carbonates. The spectral parameters considered in this work are: spectral slopes estimated between 1.2 µm and 1.9 µm, band depths at 2.7-, 3.1-, 3.4- and 4.0-µm, and band centers near 4.0-µm. The ccps spectral parameters were analyzed in conjunction with other Cerean parameters, such as the estimated depth of excavation of the material composing the central peak, in order to search for correlations and information about Ceres’ subsurface. Central peak material located polewards show stronger 2.7- and 3.1-µm band depths with respect to those at the equatorial region, suggesting that subsurface deposits closer to poles are probably richer in Mg- and NH4-phyllosilicates. The 3.4-µm spectral feature is also deeper in ccps located at poleward latitudes, similar to the phyllosilicates. Conversely, the 4.0-µm band does not show this trend with latitude. An increase in both 3.1- and 3.4-µm band depths with the estimated depth of excavation indicates that the spectral feature at 3.4-µm is the result of different contributions from carbonates and NH4-phyllosilicates, as expected. However, depending on their relative influence, the shape of the 3.4-µm spectral feature can vary. Phyllosilicates and carbonates are the resulting products of aqueous alteration of chondritic material and, given the increasing abundance of such minerals (in particular ammoniated phyllosilicates) with depth of excavation, it is likely that our investigation involved subsurface layers nearby the boundary between the volatile-rich crust and the silicate-rich mantle. Na-carbonate is found in the crater central peak material of Ernutet, Haulani and Ikapati, characterized by an estimated depth of excavation of about 6–9 km, where deposits of sodium carbonates could be locally present.

Impact craters of different geological ages, sizes and morphologies are not only the most obvious surface features on Ceres’ surface. The investigation of their spectral properties in combination with Ceres’ geology and topography reveals not only lateral compositional variations in Ceres’ surface material but also possible stratigraphic differences within Ceres’ crust. Spectral properties of impact craters with different ages do show distinct trends implying variations with increasing exposure duration of the impact material onto Ceres’ surface. Local concentrations of H2O ice and carbonates are associated with the youngest, either recently emplaced or excavated, surface deposits. On the contrary, regionally higher amounts of ammoniated phyllosilicates originate from deeper regions of Ceres’ crust and strengthen the theory of ammonia being a primordial constituent of Ceres. The blue spectral slope, clearly associated with relatively weak absorptions of OH-bearing and/or ammoniated phyllosilicates, is limited to fresh impact material. Either, the blue spectral slope diminishes slowly with increasing geologic age due to space weathering processes, or shortly as a result of gravitation-induced slumping, forming a fine and loosely consolidated regolith.

We studied the distribution in the Urvara–Yalode region of Ceres (latitudes 21–66°S, longitudes 180–360°E) of main spectral parameters derived from the VIR imaging spectrometer onboard the NASA/Dawn spacecraft, as an overall study of Ceres mineralogy reported in this special issue. In particular, we analyzed the distribution of reflectance at 1.2 µm, band depth at 2.7 and 3.1 µm, ascribed to magnesium and ammoniated phyllosilicates, respectively. Whereas the average band depths of this region are lower than eastern longitudes, reflecting the E-W dichotomy of abundance of phyllosilicates on Ceres, spectral variations inside this region are observed in the following units: (a) the central peak of the Urvara crater (45.9°S, 249.2°E, 170 km in diameter), showing a deep 3.1 µm band depth, indicating an ammonium enrichment; (b) the cratered terrain westwards of the Yalode basin (42.3°S, 293.6°E, 260 km in diameter), where absorption bands are deeper, probably due to absence of phyllosilicates depletion following the Yalode impact; (c) the hummocky cratered floor of Yalode and Besua (42.4°S, 300.2°E) craters, characterized by lower albedo and band depths, probably due to different roughness; (d) Consus (21°S 200°E) and Tawals (39.1°S, 238°E) craters, whose albedo and band depths decreasing could be associated to different grain size or abundance of dark materials. Twenty-two small scale (i.e., lower than 400 m) bright spots are observed: because their composition is similar to the Ceres average, a strong mixing may have occurred since their formation.

Ceres has been explored by NASA/Dawn spacecraft, which allowed for the discovery of the main mineralogical and compositional characteristics of Ceres' surface. Here, we use mainly data from the Visible and InfraRed imaging spectrometer (VIR) in order to investigate the main spectral characteristics of the quadrangle Ac-H-2 Coniraya, one of the 15 quads in which Ceres' surface has been divided. Coniraya quadrangle is characterized by the presence of mostly highly degraded impact craters of diameters between 50 and 200 km and clusters of small to midsize impact craters. Although the composition over the quadrangle appears to be quite uniform, significant differences have been detected between different craters by spectral parameters analysis and spectral modeling. Ernutet crater presents two regions with very peculiar band at 3.4 μm, typical of organics aliphatic material. One region result to be correlated with larger amount of carbonates, the other region does not present such correlation. Ikapati crater shows strong absorption bands at 4.0 μm, indicating the presence of Na-carbonates in the floor and ejecta. Ikapati, Gaue and other craters present smaller spectral features of NH4 and/or OH stretching, suggesting a volatile depletion process induced by the heating of the impact event.

This paper focuses on the identification and distribution of compositional units and their stratigraphic relationships in the Fejokoo quadrangle of Ceres (Ac-5) located between 21–66°N and 270–360°E and named after one of its prominent and well-preserved impact craters, Fejokoo (centered at 26°N and 312°E). In this quadrangle, we observed that hydroxylated- (OH-rich) and ammoniated- (NH4-rich) phyllosilicates are present everywhere, in various abundances; low abundance is observed on bright terrains and higher abundances are observed on lobate materials associated with craters. Carbonates are mostly correlated with the high-albedo areas surrounding Oxo (359.7°E, 42.2°N) and other major craters, and are mixed with Ceres’ most common surface composition type (i.e. low albedo, phyllosilicate-rich material). There are a few locations where carbonates and phyllosilicates co-exist, indicating a range of geological or chemical processes produced them in co-existence. No correlation between the surface composition and the age of the craters was found. Instead, the composition observed on impact craters depends on the size of the impact and the composition of the different stratigraphic layers excavated. The compositional interpretation inferred from Dawn's visible-infrared spectrometer data of the Fejokoo quadrangle is consistent with the presence of an internal ocean that produced carbonates and phyllosilicates via aqueous alteration of minerals.

Mineralogical maps of the Ac-H-11 Sintana and the Ac-H-12 Toharu quadrangles of the dwarf planet Ceres were produced in order to access the composition of this planetary body. We used data from NASA's Dawn spacecraft, in particular the spectra returned by VIR, the imaging spectrometer on board. Different spectral parameters in the infrared range have been computed to study the composition of this portion of Ceres’ surface and its large and small scale variability. We studied the variation and distribution of the phyllosilicate bands at 2.73 µm and 3.07 µm, the reflectance at 1.2 µm, and the overall spectrum in specific locations. We did not observe variations of the center of the bands at 2.73 µm and 3.07 µm, with the exception of a few pixels in the Kupalo crater. We found that this southern region, extending from 0° to 180° and from 21°S to 66°S, show an overall increase of phyllosilicate band intensity from the equatorial areas to the southern areas. Superimposed to the large-scale trend, we observe many smaller localized variations of band intensity. The observed variations can indicate large and small-scale heterogeneities in the abundance of the different species in the Ceres subsurface. However, the small-scale variation that is mostly associated with young craters, can be also due to processes related with impacts, such as de-hydration or delivery of exogenous material that, mixed with the original surface, could change the band intensity. Several craters, such as Kupalo and Juling, show a different composition with respect to the background, displaying water ice and sodium carbonates.

Quadrangle Ac-H-08 Nawish is located in the equatorial region of Ceres (Lat 22°S-22°N, Lon 144°E- 216°E), and it has variable mineralogy and geology. Here, we report on the mineralogy using spectra from the Visible and InfraRed (VIR) mapping spectrometer onboard the NASA Dawn mission. This quadrangle has two generally different regions: the cratered highlands of the central and eastern sector, and the eastern lowlands. We find this dichotomy is also associated with differences in the NH4-phyllosilicates distribution. The highlands, in the eastern part of the quadrangle, appear depleted in NH4-phyllosilicates, conversely to the lowlands, in the north-western side. The Mg-phyllosilicates distribution is quite homogeneous across Nawish quadrangle, except for few areas. The 2.7 µm band depth is lower in the south-eastern part, e.g. in the Azacca ejecta and Consus crater ejecta, and the band depth is greatest for the Nawish crater ejecta, and indicates the highest content of Mg-phyllosilicates of the entire quadrangle. Our analysis finds an interesting relationship between geology, mineralogy, topography, and the age in this quadrangle. The cratered terrains in the highlands, poor in NH4 phyllosilicates, are older (2 Ga). Conversely, the smooth terrain, such as with Vindimia Planitia, is richer in ammonia-bearing phyllosilicates and is younger (1 Ga). At the local scale, Ac-H-8 Nawish, displays several interesting mineralogical features, such as at Nawish crater, Consus crater, Dantu and Azzacca ejecta, which exhibit localized Na-carbonates deposits. This material is superimposed on the cratered terrains and smooth terrains and shows the typical depletion of phyllosilicates, already observed on Ceres in the presence of Na-carbonates.

The measured nitrogen-to-carbon ratio in comets is lower than for the Sun, a discrepancy which could be alleviated if there is an unknown reservoir of nitrogen in comets. The nucleus of comet 67P/Churyumov-Gerasimenko exhibits an unidentified broad spectral reflectance feature around 3.2 micrometers, which is ubiquitous across its surface. On the basis of laboratory experiments, we attribute this absorption band to ammonium salts mixed with dust on the surface. The depth of the band indicates that semivolatile ammonium salts are a substantial reservoir of nitrogen in the comet, potentially dominating over refractory organic matter and more volatile species. Similar absorption features appear in the spectra of some asteroids, implying a compositional link between asteroids, comets, and the parent interstellar cloud., Comment: Main manuscript and Supplementary material document, Accepted for publication in Science on February 14, 2020

Chlorinated compounds have been recently identified or suggested to exist in a number of planetary bodies such as Ceres, Europa, Ganymede, Enceladus and Mars, on the basis of remote sensing and in-situ measurements as well as Earth-based telescopic observations. Sodium and magnesium-bearing chlorinated compounds with different levels of hydration have been suggested to reach the surface of these bodies through ascending flows from the interior; thus, such materials could be geochemically related to the putative presence of subsurface liquid reservoirs and could bring precious information about those layers' salty composition. Laboratory spectroscopic data of chlorinated salts carried out at temperatures representative of real planetary bodies, fundamental to correctly interpret the observational data, are currently missing or incomplete. Here we present laboratory reflectance spectra of two hydrated magnesium chlorides, namely MgCl2•2H2O and MgCl2•6H2O, measured at three different grain sizes and at twelve temperature values in the range 80÷295 K. All spectra have been measured in the visible and infrared spectral range 0.5÷4.7 μm. We examined the absorption features and related spectral parameters as a function of both temperature and grain size. These reflectance spectra, as far as the infrared range beyond 2.5 μm is concerned, are the first measured and published at cryogenic temperatures, therefore these data may prove very useful for the interpretation and modeling of remote sensing spectral data from planetary missions. In particular, this new dataset will be helpful in applying spectral unmixing models to past and future observations of some icy satellites, Mars, Ceres, and possibly other Solar System bodies.

The surface mineralogy of dwarf planet Ceres appears to be dominated by products of rock–fluid interactions, such as phyllosilicates—some of which are NH4-bearing—and carbonates1–3. Elemental concentrations derived from the inferred mineral mixing fractions, however, do not match measurements of H, C, K and Fe on Ceres4. A complicating factor in assessing Ceres’s unique surface composition is the secular accretion of asteroids typical of chondritic compositions. Here we show that Ceres’s mineral and elemental data can be explained by the presence of carbonaceous chondritic-like materials (~50–60 vol%), possibly due to infalling asteroids, admixed with aqueously altered endogenic materials that contain higher-than-chondritic concentrations of carbon. We find that Ceres’s surface may contain up to 20 wt% of carbon, which is more than five times higher than in carbonaceous chondrites. The coexistence of phyllosilicates, magnetite, carbonates and a high carbon content implies rock–water alteration played an important role in promoting widespread carbon chemistry. These findings unveil pathways for the synthesis of organic matter, with implications for their transport across the Solar System. Infrared and neutron spectroscopic observations by Dawn give contrasting results on the elemental composition of Ceres’s surface, which can be reconciled by assuming that Ceres’s surface contains ~20 wt% of carbon, coming from impacts by carbonaceous asteroids and/or generated by extensive aqueous alteration.

Since its arrival at Ceres, DAWNs Framing Camera has been imaging the dwarf planet at different altitudes, using 8 different filters. Based on these images, global clear filter mosaics, digital terrain models, and global color mosaics were produced. These datasets are basis for the derived photogeologic map of the Ac2 Coniraya quadrangle, located between 0° and 90° eastern longitude and between 20° and 40° northern latitude. Crater size frequency distribution (CSFD) measurements have been applied to derive the stratigraphic history of the identified geologic units in the Ac2 Coniraya quadrangle. Based on these investigations, we found that the Ac2 Coniraya quadrangle shows evidence for a long geologic history lasting over 3.5 Ga. Most of the identified geologic units are related to impact cratering at different periods of time. While the oldest unit identified in the Ac2 Coniraya quadrangle, the cratered terrain, shows an absolute model age (AMA) of 3.3 to 3.5 Ga, the youngest units, including fresh impact craters and lobate flows, show AMAs of < 100 Ma. The large number of different sized impact craters excavated a variety of materials with different colors and albedo, indicative of a heterogeneous crustal composition, including water or volatiles. Pits identified at Ikapati craters smooth deposits might further indicate the presence of volatiles in the subsurface. Furthermore, our mapping of the Ac2 Coniraya quadrangle shows that possible H 2 O ice in the crust is heterogeneously distributed, as lobate flows, bright spots, and pits are only found at certain locations, related to relatively fresh impact craters.

Ceres is the largest object in the main belt and is a wet body with a complex geological and chemical history. Its surface is composed of opaque materials, phyllosilicates, ammoniated-bearing minerals, carbonates, water ice, and salts. Recently, aliphatic organics, whose origin is still uncertain, have also been detected on the Ceres surface by the imaging spectrometer Visible and Infrared Spectrometer (VIR) on board Dawn. Here, using VIR spectra, acquired with a high spatial resolution (< 100 m), we have analysed the organic-rich areas, their spectral characteristics, and the associated mineralogy. The new VIR spectra in the 3.2-3.6 µm spectral range have been compared to organic standard compounds measured in the laboratory, to investigate more deeply the nature of the organic matter on Ceres. The mineralogy appears quite complex, and the organic matter is often associated with a larger amount of ammoniated phases and carbonates. The detailed spectral analysis, as well as the laboratory comparison, reveal the presence of a band at 2.99-3 μm, likely associated with organic or inorganic NH-compounds (amine or salts), and the organic matter may be characterized by a rather low abundance of oxygen atoms. Spectral models of the organic material indicate that hundreds of meters-size areas can be very rich in aliphatic organics, with an estimated organic amount larger than the quantity normally found in CC meteorites. The mineralogical context and the retrieved amounts suggest that the aliphatic organic is likely a Ceres' endogenous product, and we formulate a hypothesis for the formation and evolution of the organic matter inside Ceres.

NASA’s Dawn spacecraft acquired images and hyperspectral data of Ceres by means of FC and VIR instruments, and identified some widespread bright areas or bright spots (BS). The most peculiar BS is inside Occator crater and it is characterized by spectral properties very dissimilar from the rest of Ceres’ surface. To perform a mineralogical analysis, absorption bands in reflectance spectra must be properly isolated by removal of continuum, and related descriptors (such as band centers and band depths) can be computed. The method for continuum removal must be applicable to all Ceres spectra, relative to different areas, so that a comparison among spectral parameters can be made and mineralogical interpretation can be achieved. This work focuses on the definition of the most appropriate continuum to isolate absorption bands located at ∼3.1, ∼3.4 and ∼4.0 µm. The ∼3.1 µm feature is related to ammoniated phyllosilicates, while the ∼3.4 and ∼4.0 µm absorption bands are indicative of carbonates. Thermal emission affects the continuum for these bands in the VIR spectral range, which extends up to 5.1 µm, moreover all thermal-removed reliable data stop at 4.2 µm. This implies that the shoulder of bands at longer wavelength cannot be identified. We therefore defined alternative continua, i.e., a linear and two polynomial ones, able to describe spectra of any area (i.e. bright or dark) and regardless of spatial resolution. We found that the linear definition satisfies these requirements best. For the first time, we performed an error evaluation on band depths and band centers introduced by the applied method, which is relevant for comparison of spectral parameters of Ceres regions and to better interpret mineralogy and photometric effects.

Thermal inertia is a key information to quantify the physical status of a planetary surface; it can be retrieved by comparison between theoretical and observed temperature diurnal profiles. We have calculated the surface temperature for a set of locations on Ceres' surface with a thermophysical model that provides temperature as a function of thermal conductivity and roughness, and we have determined the values of those parameters for which the best fit with the observed data is obtained. The observed temperatures have been retrieved form spatially-resolved data from the Dawn mission. In our previous work [Rognini et al., 2019], we have found that the average thermal inertia for the overall surface of Ceres is low (from 1 to 15 to 60 ​J ​m−2 ​s−½ K−1), as expected according to the general trend observed in the Solar System for atmosphere-less bodies, while the thermal inertia of the very bright faculae found in the floor of the Occator crater could not be well defined. Using more recently acquired VIR high resolution data we find that the central part of the Cerealia facula displays a thermal anomaly ( ~ 10 K above the average) compatible with a higher thermal inertia with respect to the surrounding regions, while the Vinalia facula does not display any consequently could have a grain size comparable with the Ceres’ surface average.

The origin of basaltic asteroids found in the middle and outer main belt is an open question. These asteroids are not dynamically linked to the Vesta collisional family and can be the remnants of other large differentiated asteroids present in the early phases of the main belt but destroyed long ago. Spectroscopic investigation of some V-type asteroids in the middle-outer belt, classified as such by their SLOAN photometric colours (Ivezić et al.) and WISE albedos (Masiero et al.), has revealed that their spectra are more similar to other taxonomic classes, like -Q, R, S, or A (Jasmim et al. and Oszkiewicz et al.). Here, we report about the observation, in the near-infrared spectral range, of five V-type asteroids located beyond 2.5 au. These observations allowed us to infer their taxonomic classification. Two asteroids, (21238) Panarea (observed in a previous campaign but here included for comparison) and (105041) 2000 KO41, confirm their basaltic nature. For asteroids (10800) 1992 OM8 and (15898) Kharasterteam a taxonomic classification is more uncertain, being either Q- or S-type. Asteroid (14390) 1990 QP10 classification is difficult to ascribe to the known taxonomic classes, maybe due to the low-quality spectrum. Further observations are desirable for this asteroid.

Prior to the arrival of the Dawn spacecraft at Ceres, the dwarf planet was anticipated to be ice‐rich. Searches for morphological features related to ice have been ongoing during Dawn's mission at Ceres. Here we report the identification of pitted terrains associated with fresh Cerean impact craters. The Cerean pitted terrains exhibit strong morphological similarities to pitted materials previously identified on Mars (where ice is implicated in pit development) and Vesta (where the presence of ice is debated). We employ numerical models to investigate the formation of pitted materials on Ceres and discuss the relative importance of water ice and other volatiles in pit development there. We conclude that water ice likely plays an important role in pit development on Ceres. Similar pitted terrains may be common in the asteroid belt and may be of interest to future missions motivated by both astrobiology and in situ resource utilization., Key Points Fresh complex craters on Ceres host distinctive pitted terrains that are morphologically similar to pitted materials on Mars and VestaPitted terrains on Ceres likely form via the rapid volatilization of molecular H2O entrained in impact materialsPitted terrains may be common morphological markers of volatile‐rich near‐surface material in the asteroid belt

Data acquired at Ceres by the visible channel of the Visible and InfraRed mapping spectrometer (VIR) on board the NASA Dawn spacecraft are affected by the temperatures of both the visible (VIS) and the infrared (IR) sensors, which are respectively a CCD and a HgCdTe array. The variations of the visible channel temperatures measured during the sessions of acquisitions are correlated with variations in the spectral slope and shape for all the mission phases. The infrared channel (IR) temperature is more stable during the acquisitions, nonetheless it is characterized by a bi-modal distribution whether the cryocooler (and therefore the IR channel) is used or not during the visible channel operations. When the infrared channel temperature is high (175K, i.e. not in use and with crycooler off), an additional negative slope and a distortion are observed in the spectra of the visible channel. We developed an empirical correction based on a reference spectrum for the whole data set; it is designed to correct the two issues related to the sensor temperatures that we have identified. The reference spectrum is calculated to be representative of the global Ceres' surface. It is also made of data acquired when the visible and infrared channel temperatures are equal to the ones measured during an observation of the Arcturus star by VIR, which is consistent with several ground-based observations. The developed correction allows reliable analysis and mapping to be performed by minimizing the artifacts induced by fluctuations of the VIS temperature. Thanks to this correction, a direct comparison between different mission phases during which VIR experienced different visible and infrared channel temperatures is now possible., Comment: The following article has been accepted by Review of Scientific Instruments on 24 November 2019. After it is published, it will be found at this link: https://publishing.aip.org/resources/librarians/products/journals/

The surface and internal structure of Ceres show evidence of a global process of aqueous alteration, indicating the existence of an ocean in the past. However, it is not clear whether part of this ocean is still present and whether residual fluids are still circulating in the dwarf planet. These fluids may be exposed in a geologically young surface, and the most promising site to verify the occurrence of present fluids on Ceres is Cerealia Facula dome, in Occator crater. This very young facula exhibits minerals that are relatively rare in our Solar System, the formation of which requires the presence of liquid water in combination with hydrothermal activity. Here we report the discovery of hydrated sodium chloride on Cerealia Facula. These newly identified chloride salts are concentrated on the top of the dome, close to a system of radial fractures. The spatial distribution of the hydrated phase suggests that chloride salts are the solid residue of deep brines that reached the surface only recently, or are still ascending. These salts are very efficient in maintaining Ceres’s warm internal temperature and lowering the eutectic temperature of the brines, in which case ascending salty fluids may exist in Ceres today. Spectroscopic data obtained at high spatial resolution from Dawn detected the presence of fresh chloride salts at Cerealia Facula on Ceres. The spatial distribution of the hydration level of these salts suggests that they surfaced a maximum of a few centuries ago and that the upwelling of salty fluids may still be active.

Thermal inertia is a key information to quantify the physical status of a planetary surface. We derive the thermal inertia of the surface of Ceres using spatially resolved data from the Dawn mission. For each location, this quantity can be constrained by comparing theoretical and observed diurnal temperature profiles from retrieved temperatures. We calculated Ceres's surface theoretical temperatures with a thermophysical model that provides temperature as a function of thermal conductivity and roughness, and we determined the values of those parameters for which the best fit with the observed data is obtained. Our results suggest that the area of crater Haulani displays thermal inertia values (up to 130-140 J·m-2·s-½·K-1) substantially higher than the very low to low values (from 1-15 to 50-60 J·m-2·s-½·K-1) derived for the overall surface of Ceres. The results are more ambiguous for the bright faculae located in the floor of crater Occator.

Context.Particulate surfaces exhibit a surge of reflectance at low phase angles, a phenomenon referred to as the opposition effect (OE). Two mechanisms are recognized as responsible for the OE: shadow hiding (SH) and coherent backscattering. The latter is typically characterized by a small angular width of a few degrees at most and according to the theoretical prediction should exhibit wavelength and albedo dependence.Aims.We characterize the OE on the surface of Ceres using Dawn Visible InfraRed mapping spectrometer hyperspectral images at low phase angles. Furthermore, this dataset, coupled with previous observations, allows us to perform a complete spectrophotometric modeling at visual-to-infrared (VIS-IR) wavelengths (0.465–4.05μm) in the broad phase angle range ≈0°−132°.Methods.We applied Hapke’s theory to the average phase curve for Ceres. Disk-resolved properties of the OE were investigated through an empirical model.Results.Across the investigated phase angle interval, Ceres’ average phase curve exhibits a smaller back-scattering contribution for increasing wavelengths. This determines a progressive spectral reddening at larger phase angles that we hypothesize as being related to the effect of submicron roughness on the grain surface. In the OE region, the shape of the phase curves is fairly constant across the VIS range and no sharp opposition surge at very small phase angles (α< 2°) can be recognized. This would suggest a major contribution from SH to Ceres’ OE. Assuming SH as the dominant mechanism, from the OE angular width we infer a high surface porosity (≈0.9), which appears in good qualitative agreement with Ceres’ low thermal inertia. Thanks to the OE observations we derive Ceres’ VIS-IR geometric albedo with a reference value at 0.55μm of 0.098 ± 0.007. Mapping of the VIS normal albedo and OE angular width across a portion of the surface of Ceres does not reveal a spatial correlation between these quantities, consistent with SH dominating in theα= 0°−7° interval. The comparison of Ceres’V-band magnitude curve with that of other asteroids indicates that Ceres’ OE is typical of a low-albedo object and compatible with the C-class type.

This work describes the correction method applied to the dataset acquired at the asteroid (4) Vesta by the visible channel of the visible and infrared mapping spectrometer. The rising detector temperature during data acquisitions in the visible wavelengths leads to a spectral slope increase over the whole spectral range. This limits the accuracy of the studies of the Vesta surface in this wavelength range. Here, we detail an empirical method to correct for the visible detector temperature dependency while taking into account the specificity of the Vesta dataset., Comment: 6 pages, 5 figures and 1 table excluding supplementary material

Full list of authors: Cremonese, G.; Capaccioni, F.; Capria, M. T.; Doressoundiram, A.; Palumbo, P.; Vincendon, M.; Massironi, M.; Debei, S.; Zusi, M.; Altieri, F.; Amoroso, M.; Aroldi, G.; Baroni, M.; Barucci, A.; Bellucci, G.; Benkhoff, J.; Besse, S.; Bettanini, C.; Blecka, M.; Borrelli, D.; Brucato, J. R.; Carli, C.; Carlier, V.; Cerroni, P.; Cicchetti, A.; Colangeli, L.; Dami, M.; Da Deppo, V.; Della Corte, V.; De Sanctis, M. C.; Erard, S.; Esposito, F.; Fantinel, D.; Ferranti, L.; Ferri, F.; Ficai Veltroni, I.; Filacchione, G.; Flamini, E.; Forlani, G.; Fornasier, S.; Forni, O.; Fulchignoni, M.; Galluzzi, V.; Gwinner, K.; Ip, W.; Jorda, L.; Langevin, Y.; Lara, L.; Leblanc, F.; Leyrat, C.; Li, Y.; Marchi, S.; Marinangeli, L.; Marzari, F.; Mazzotta Epifani, E.; Mendillo, M.; Mennella, V.; Mugnuolo, R.; Muinonen, K.; Naletto, G.; Noschese, R.; Palomba, E.; Paolinetti, R.; Perna, D.; Piccioni, G.; Politi, R.; Poulet, F.; Ragazzoni, R.; Re, C.; Rossi, M.; Rotundi, A.; Salemi, G.; Sgavetti, M.; Simioni, E.; Thomas, N.; Tommasi, L.; Turella, A.; Van Hoolst, T.; Wilson, L.; Zambon, F.; Aboudan, A.; Barraud, O.; Bott, N.; Borin, P.; Colombatti, G.; El Yazidi, M.; Ferrari, S.; Flahaut, J.; Giacomini, L.; Guzzetta, L.; Lucchetti, A.; Martellato, E.; Pajola, M.; Slemer, A.; Tognon, G.; Turrini, D. -- This is an open access article, The SIMBIO-SYS (Spectrometer and Imaging for MPO BepiColombo Integrated Observatory SYStem) is a complex instrument suite part of the scientific payload of the Mercury Planetary Orbiter for the BepiColombo mission, the last of the cornerstone missions of the European Space Agency (ESA) Horizon + science program. The SIMBIO-SYS instrument will provide all the science imaging capability of the BepiColombo MPO spacecraft. It consists of three channels: the STereo imaging Channel (STC), with a broad spectral band in the 400-950 nm range and medium spatial resolution (at best 58 m/px), that will provide Digital Terrain Model of the entire surface of the planet with an accuracy better than 80 m; the High Resolution Imaging Channel (HRIC), with broad spectral bands in the 400-900 nm range and high spatial resolution (at best 6 m/px), that will provide high-resolution images of about 20% of the surface, and the Visible and near-Infrared Hyperspectral Imaging channel (VIHI), with high spectral resolution (6 nm at finest) in the 400-2000 nm range and spatial resolution reaching 120 m/px, it will provide global coverage at 480 m/px with the spectral information, assuming the first orbit around Mercury with periherm at 480 km from the surface. SIMBIO-SYS will provide high-resolution images, the Digital Terrain Model of the entire surface, and the surface composition using a wide spectral range, as for instance detecting sulphides or material derived by sulphur and carbon oxidation, at resolutions and coverage higher than the MESSENGER mission with a full co-alignment of the three channels. All the data that will be acquired will allow to cover a wide range of scientific objectives, from the surface processes and cartography up to the internal structure, contributing to the libration experiment, and the surface-exosphere interaction. The global 3D and spectral mapping will allow to study the morphology and the composition of any surface feature. In this work, we describe the on-ground calibrations and the results obtained, providing an important overview of the instrument performances. The calibrations have been performed at channel and at system levels, utilizing specific setup in most of the cases realized for SIMBIO-SYS. In the case of the stereo camera (STC), it has been necessary to have a validation of the new stereo concept adopted, based on the push-frame. This work describes also the results of the Near-Earth Commissioning Phase performed few weeks after the Launch (20 October 2018). According to the calibration results and the first commissioning the three channels are working very well. © 2020, The Author(s)., We gratefully acknowledge funding from the Italian Space Agency (ASI) under ASI-INAF agreement 2017-47-H.0. The SIMBIO-SYS instrument has been developed by Leonardo under ASI contract I/054/10/0.

International audience; K nowledge of the surface temperature distribution of a comet's nucleus proves to be of fundamental importance for a number of reasons: the evaluation of the thermophysical properties (thermal inertia and roughness, at several spatial scales), the characterization of the thermal behaviour of peculiar surface units (for example, local ice exposures, or inherently cold material units not to be confused with shaded areas), and for the understanding of the physical processes affecting the surface and the shallow subsur-face layers (for example, sublimation of volatile compounds). The distribution of surface temperatures of a cometary nucleus, closely measured by a spacecraft, can be compared with theoretical models meant to predict the thermophysical properties of the nucleus at various depths and with previous thermal observations carried out by both Earth-based and space-based telescopes, with the goal of validating and/or improving those models 1. Furthermore, the temporal evolution of the surface temperatures, primarily driven by insolation, is critical in triggering the activity of a comet, allowing the migration of volatile compounds from the interior of the nucleus and the production of gas and dust observable with different techniques 2. In the past, thermal surveys of minor bodies were carried out using ground-based and space-based facilities. However, due to the limited spatial resolution of those observations, in most cases the derived thermal properties were only global averages, and the determined temperatures were highly model dependent. Before Rosetta, direct measurements of cometary nuclei surface temperatures were obtained during short periods for a handful of comets, namely 1P/ Halley 3 , 19P/Borrelly 4 , 9P/Tempel 1 1 and 103P/Hartley 2 5 , with a maximum spatial resolution of approximately 30 m per pixel. Here we study the surface temperature distribution of the nucleus of comet 67P/Churyumov-Gerasimenko as derived by the Visible InfraRed and Thermal Imaging Spectrometer, Mapping channel (VIRTIS-M, hereafter VIRTIS) 6 in Rosetta's early global mapping phase after comet encounter. These data cover the pre-perihelion period from 1 August to 23 September 2014, when the heliocentric distance decreased from 3.62 to 3.31 au and the spacecraft was in the altitude range 61-13 km above the surface, resulting in a spatial resolution from approximately 15 to 3 m per pixel (most data showing a resolution of 13 to 15 m per pixel). In this period, the solar phase angle ranged from 17° to 93°, which Knowledge of the surface temperature distribution on a comet's nucleus and its temporal evolution at different timescales is key to constraining its thermophysical properties and understanding the physical processes that take place at and below the surface. Here we report on time-resolved maps of comet 67P/Churyumov-Gerasimenko retrieved on the basis of infra-red data acquired by the Visible InfraRed and Thermal Imaging Spectrometer (VIRTIS) onboard the Rosetta orbiter in 2014, over a roughly two-month period in the pre-perihelion phase at heliocentric distances between 3.62 and 3.31 au from the Sun. We find that at a spatial resolution ≤15 m per pixel, the measured temperatures point out the major effect that self-heating, due to the complex shape of the nucleus, has on the diurnal temperature variation. The bilobate nucleus of comet 67P also induces daytime shadowing effects, which result in large thermal gradients. Over longer periods, VIRTIS-derived temperature values reveal seasonal changes driven by decreasing heliocentric distance combined with an increasing abundance of ice within the uppermost centimetre-thick layer, which implies the possibility of having a largely pristine nucleus interior already in the shallow subsurface.

High-resolution mapping of Ceres, Vesta and the icy satellites of Saturn, Uranus and Pluto reveals a rich variety of well-preserved impact crater morphologies on these low gravity bodies. These objects provide a natural laboratory to study effects of composition on crater formation processes under similar surface gravity conditions (though mean impact velocities vary by several factors). Simple craters occur on all these bodies but subtle differences in morphology on Ceres and Vesta are recognized. Immature complex craters (with large floor mounds but not terraces or conical central peaks) occur on Vesta and while smaller than predicted are consistent with its silicate composition. Asymmetric simple craters (with incomplete scarp development) on all bodies are likely related to differential overburden stresses in the rim, and their occurrence is consistent with lower crustal strength on icy bodies including Ceres. Immature and mature complex craters exhibit increasing degrees of complexity, including spiral floor deformation patterns (related to failure in converging floor material), central peaks, and impact melt. Cerean crater morphologic types and simple-complex transition diameters are smaller than on Vesta but similar to those on icy satellites, indicating a much weaker rheology for Ceres' outer layers under impact conditions. These are consistent with geophysical indications of a low-density water ice and probably clathrate rich outer shell. Fluidized floor deposits (impact melt or melt-solid mixtures) are significant in craters >25 km across on Ceres but absent on Saturn satellites. Central pit craters are common on Ceres (at diameters of ~75 to 150 km consistent with gravity scaling from the larger Galilean satellites) but are absent on Saturnian satellites and Charon. The contrasting impact melt and central pit behaviors on Ceres and Saturn's moons is contrary to expectation given the higher impact velocities at Saturn but might be related to lower internal temperatures, or the higher fraction of non-ice material on Ceres. The correlation or scaling of transition diameters to surface gravity is near −0.65 rather than −1, perhaps due to increased porosity on lower gravity bodies. The fundamental similarity of crater morphologies on Ceres and icy satellites, however, indicates that the weaker rheology of water ice results in similar craters even if the non-(ice+clathrate) components are as high as ~30 vol%.