Search

The solar chromosphere was daily observed in the Ca ii K line at the Mount Wilson Observatory from 1915 August to 1985 July. A digitized data base was created, which includes synoptical maps of the chromosphere in Ca ii intensity from Carrington rotations 827 to 1764. We have used the data base to investigate rotation and its differential of the chromosphere and the quiet chromosphere. The chromosphere is found to rotate faster than sunspots, but the difference in their rotation rates decreases with decreasing latitude, and near the equator they rotate at nearly the same speed. The chromosphere is obviously faster than the quiet photosphere and slightly faster than the quiet chromosphere at low latitudes, but slightly slower than the quiet chromosphere at middle latitudes. The differential degree of the rotation rate at low latitudes, ranging from largest to smallest in order, is found to be: sunspots, the chromosphere, the quiet photosphere, and the quiet chromosphere. The differential of the rotation rate is found to be different in different solar cycles for the chromosphere and the quiet chromosphere. Helioseismology observations suggest that these findings are plausible.

Synoptic maps of Ca II K-normalized intensity at ±40° latitude belt from Carrington rotations 827 (1915 August 10) to 1764 (1985 July 7) are utilized to investigate the long-term variation of the quiet chromospheric differential rotation within solar activity cycles through removing some large values of Ca II-normalized intensity. The equatorial rotation rate of the quiet chromosphere is found to be smaller than that of the chromosphere, and the absolute value of the parameter B is also found to be smaller for the quiet chromosphere than for the chromosphere on the whole, especially during periods of solar cycle maxima. Therefore, we induce that the differential of rotation rate in the quiet chromosphere seems to be enhanced by large-scale magnetic fields. The north–south asymmetry in the solar rotation is also investigated, and the asymmetry coefficients of the chromosphere and the quiet chromosphere are positively correlated in solar cycles 15–17, while they are negatively correlated in solar cycles 18–21.

Lysine acetylation in histone tails is a key post-translational modification that controls transcription activation. Histone deacetylase complexes remove histone acetylation, thereby repressing transcription and regulating the transcriptional output of each gene. Although these complexes are drug targets and crucial regulators of organismal physiology, their structure and mechanisms of action are largely unclear. Here, we present the structure of a complete human SIN3B histone deacetylase holo-complex with and without a substrate mimic. Remarkably, SIN3B encircles the deacetylase and contacts its allosteric basic patch thereby stimulating catalysis. A SIN3B loop inserts into the catalytic tunnel, rearranges to accommodate the acetyl-lysine moiety, and stabilises the substrate for specific deacetylation, which is guided by a substrate receptor subunit. Our findings provide a model of specificity for a main transcriptional regulator conserved from yeast to human and a resource of protein-protein interactions for future drug designs.

Direct numerical simulation data obtained from four pairs of turbulent, lean hydrogen–air, complex-chemistry flames are analysed to explore the influence of molecular diffusion on flame surface density, displacement speed $S_d$ and the flame surface density transport equation terms. Each pair involves (i) a flame where mixture-averaged molecular diffusivities are adopted and Lewis number $Le$ is significantly less than unity and (ii) an equidiffusive flame where all molecular diffusivities are set equal to molecular heat diffusivity of the mixture and $Le=1$ , with other things being equal. Reported results show that significantly higher turbulent burning rates simulated in the former flames result mainly from an increase in the local fuel consumption rate, whereas an increase in flame surface area plays a secondary role, especially in more intense turbulence. The rate increase stems from (i) an increase in the peak local fuel consumption rate and (ii) an increase in a width of a zone where the rate is significant. The latter phenomenon is of more importance in richer flames and both phenomena are most pronounced in the vicinity of the flame leading edges, thus indicating a crucial role played by the leading edge of a premixed turbulent flame in its propagation. Moreover, mean displacement speed differs significantly from the laminar flame speed even in the equidiffusive flames, varies substantially across flame brush and may be negative at the leading edges of highly turbulent flames.

Purpose Understanding the factors that influence prosocial behaviour during the COVID-19 pandemic is essential due to the disruption to healthcare provision. Methods We conducted an in-depth, mixed-methods cross-sectional survey, from 2 May 2020 to 15 June 2020, of medical students at medical schools in the United Kingdom. Data analysis was informed by Latané and Darley’s theory of prosocial behaviour during an emergency. Results A total of 1145 medical students from 36 medical schools responded. Although 947 (82.7%) of students were willing to volunteer, only 391 (34.3%) had volunteered. Of the students, 92.7% understood they may be asked to volunteer; however, we found deciding one’s responsibility to volunteer was mitigated by a complex interaction between the interests of others and self-interest. Further, concerns revolving around professional role boundaries influenced students’ decisions over whether they had the required skills and knowledge. Conclusion We propose two additional domains to Latané and Darley’s theory that medical students consider before making their final decision to volunteer: ‘logistics’ and ‘safety’. We highlight modifiable barriers to prosocial behaviour and provide suggestions regarding how the conceptual framework can be operationalized within educational strategies to address these barriers. Optimizing the process of volunteering can aid healthcare provision and may facilitate a safer volunteering process. Key messages What is already known on this topic: There is a discrepancy between the number of students willing to volunteer during pandemics and disasters, and those who actually volunteer. Understanding the factors that influence prosocial behaviour during the current COVID-19 pandemic and future pandemics and disasters is essential. What this study adds: We expanded on Latané and Darley’s theory of prosocial behaviour in an emergency and used this to conceptualize students’ motivations to volunteer, highlighting a number of modifiable barriers to prosocial behaviour during the COVID-19 pandemic. How this study might affect research, practice, or policy: We provide suggestions regarding how the conceptual framework can be operationalized to support prosocial behaviours during emergencies for the ongoing COVID-19 pandemic and future crises.

Upon infecting a host cell, the reticulate body (RB) form of the Chlamydia bacteria simply proliferates by binary fission for an extended period. Available data show only RB units in the infected cells 20 hours post infection (hpi), spanning nearly half way through the development cycle. With data collected every 4 hpi, conversion to the elementary body (EB) form begins abruptly at a rapid rate sometime around 24 hpi. By modeling proliferation and conversion as simple birth and death processes, it has been shown that the optimal strategy for maximizing the total (mean) EB population at host cell lysis time is a bang-bang control qualitatively replicating the observed conversion activities. However, the simple birth and death model for the RB proliferation and conversion to EB deviates in a significant way from the available data on the evolution of the RB population after the onset of RB-to-EB conversion. By working with a more refined model that takes into account a small size threshold eligibility requirement for conversion noted in the available data, we succeed in removing the deficiency of the previous models on the evolution of the RB population without affecting the optimal bang-bang conversion strategy.

BACKGROUND AND PURPOSE: Chronic carotid artery occlusion remains a poorly understood risk factor for subsequent stroke, and potential revascularization is dependent on understanding the anatomy and nature of the occlusion. Luminal imaging cannot assess the nature of an occlusion, so the internal structure of the occlusion must be inferred. The present study examines the signal characteristics of symptomatic and asymptomatic carotid occlusion that may point to management differentiation. MATERIALS AND METHODS: We prospectively recruited patients who were diagnosed with chronic carotid artery occlusion defined as longer than 4 weeks and confirmed by DSA. All patients underwent high-resolution MR vessel wall imaging examinations after enrollment. Baseline characteristics, vessel wall imaging features, and DSA features were collected and evaluated. The vessel wall imaging features included segment involvement, signal intensity, contrast enhancement, and vessel wall thickness. The symptomatic and asymptomatic chronic carotid artery occlusions were compared. RESULTS: A total of 44 patients with 48 lesions were included in this study from February 2020 to December 2020. Of the 48 lesions, 35 (72.9%) were symptomatic and 13 (27.1%) were asymptomatic. There was no difference in baseline and DSA features. On vessel wall imaging, C1 and C2 were the most commonly involved segments (91.7% and 68.8%, respectively). Compared with symptomatic lesions, asymptomatic lesions were more often isointense (69.2%) in the distal segment (P = .03). Both groups had diffuse wall thickening (80% and 100%). CONCLUSIONS: Signal characteristics between those with symptomatic and asymptomatic carotid artery occlusions differ in a statistically significant fashion, indicating a different structure of the occlusion.

Electrically assisted (EA) microforming has pervasive benefits for the fabrication of high-performance microproducts. In this research, the coupled effect between the microstructural size effect and pulsed current on the flow characteristics of 304 stainless steel sheets along thickness direction was explored by using EA micro-compression tests. The results revealed that the strain hardening rate and the deformation stress of 304 stainless steel decreases during the EA deformation, especially when the current density exceeds 57.16 A/mm2. Besides, the effect of grain size on the micro-scaled compression is gradually weakened with the augment of current density and plastic strain. The electron backscatter diffraction (EBSD) results showed in the perspective of microstructure that the decrease of flow stress and strain hardening rate with the rise of pulsed current density is related to the reduction of dislocation density and texture strength due to the dynamic recrystallization during EA deformation. The pulsed current suppresses the grain refinement of fine-grained material and promotes that of coarse-grained material, and the recrystallization rate of EA deformation increases with the decrease of initial grain size. In addition, the recrystallization texture induced by the pulsed current can promote grain deflection and weakens the effect of twins in coarse-grained material. That can explain the reason for the weakening of the grain size effect. The findings in the research have important guiding significance for understanding the coupled mechanism of electroplastic and grain size effect on the flow characteristics of difficult-to-deform material, and further promoting the application of EA micro-rolling of high-strength materials.

Membrane technology is cost effective solution for CO2 removal from natural gas. However, there is challenges during its application depending on the polymer material characteristic. Understanding on the polymer fundamental and transport properties, will enable proper design of pre-treatment and operating conditions that suits its capability envelope. Diffusivity selective membrane favors high pressure and high temperature conditions and vice versa for solubility selective polymer. On top of that, the robustness and durability of the resultant membrane, need to be evaluated with multicomponent mixture to understand the effect of competitive sorption, plasticization and aging phenomena that will seriously impacting the membrane performance during its application.

To analyze the clinical characteristics, diagnosis, treatment and outcome of patients with thrombotic thrombocytopenic purpura (TTP). The clinical data of 69 adult patients with TTP were retrospectively analyzed. There were 19 males and 50 females with a median age of 42 (18-79) years. PLASMIC score 6-7 was recognized in 82.8% (53/64) patients. The activity of von Willebrand factor-cleaving protease (ADAMTS13), which was detected in 21 patients before treatment, was less than 5% in 17 patients and 5%-10% in 3 patients. All 69 patients were treated with plasma exchange (PEX) and/or fresh frozen plasma infusion (PI), 43 of whom were also given glucocorticoid. In addition to PEX/PI and glucocorticoid, rituximab and/or immunosuppressants were administrated in 20 patients. The median follow-up time was 12 (1-57) months. The remission rate was 69.6%, while the relapse rate was 11.6%. The 2-year overall survival (OS) rate was 69.6%±5.5%. The univariate and multivariate analysis showed that relapsed/refractory disease was an independent risk factor for OS. The 2-year OS rate of relapsed/refractory patients was significantly lower than that of the rest patients (41.5%±9.8% vs. 83.7%±5.6%,回顾性分析2017年10月至2020年10月郑州大学第一附属医院血栓性血小板减少性紫癜（TTP）患者的临床特点、诊治及转归。收集69例成人TTP患者的临床资料，其中男19例、女50例，中位年龄42（18~79）岁。64例可进行PLASMIC评分的患者，53例（82.8%）患者PLASMIC评分为6~7分。21例在治疗前检测血管性血友病因子裂解酶（ADAMTS13）活性，17例ADAMTS13活性5%，3例为5%~10%，10%的患者仅1例。69例患者均行血浆置换（PEX）和/或新鲜冰冻血浆输注（PI）治疗，其中43例加用糖皮质激素治疗，另有20例在PEX/PI+糖皮质激素治疗基础上联合利妥昔单抗和/或免疫抑制剂。69例患者中位随访时间12（1~57）个月，治疗后缓解率69.6%，复发率11.6%，2年总生存（OS）率为69.6%±5.5%。对可能影响OS的因素进行单因素及多因素分析，结果显示复发难治是影响OS的独立危险因素，26例复发难治患者2年OS率显著低于43例非复发难治者（41.5%±9.8% 比 83.7%±5.6%，

Deeper and broader sequencing of circulating tumor DNA (ctDNA) has identified a wealth of cancer markers in the circulation, resulting in a paradigm shift towards data science-driven liquid biopsies in oncology. Although panel sequencing for actionable mutations in plasma is moving towards the clinic, the next generation of liquid biopsies is increasingly shifting from analyzing digital mutation signals towards analog signals, requiring a greater role for machine learning. Concomitantly, there is an increasing acceptance that these cancer signals do not have to arise from the tumor itself. In this Opinion, we discuss the opportunities and challenges arising from increasingly complex cancer liquid biopsy data.

Global navigation satellite systems (GNSS) have been proved to be an excellent technology for retrieving precipitable water vapor (PWV). In GNSS meteorology, PWV at a station is obtained from a conversion of the zenith wet delay (ZWD) of GNSS signals received at the station using a conversion factor which is a function of weighted mean temperature (Tm) along the vertical direction in the atmosphere over the site. Thus, the accuracy of Tm directly affects the quality of the GNSS-derived PWV. Currently, the Tm value at a target height level is commonly modeled using the Tm value at a specific height and a simple linear decay function, whilst the vertical nonlinear variation in Tm is neglected. This may result in large errors in the Tm result for the target height level, as the variation trend in the vertical direction of Tm may not be linear. In this research, a new global grid-based Tm empirical model with a horizontal resolution of 1∘ × 1∘ , named GGNTm, was constructed using ECMWF ERA5 monthly mean reanalysis data over the 10-year period from 2008 to 2017. A three-order polynomial function was utilized to fit the vertical nonlinear variation in Tm at the grid points, and the temporal variation in each of the four coefficients in the Tm fitting function was also modeled with the variables of the mean, annual, and semi-annual amplitudes of the 10-year time series coefficients. The performance of the new model was evaluated using its predicted Tm values in 2018 to compare with the following two references in the same year: (1) Tm from ERA5 hourly reanalysis with the horizontal resolution of 5∘ × 5∘; (2) Tm from atmospheric profiles from 428 globally distributed radiosonde stations. Compared to the first reference, the mean RMSEs of the model-predicted Tm values over all global grid points at the 950 and 500 hPa pressure levels were 3.35 and 3.94 K, respectively. Compared to the second reference, the mean bias and mean RMSE of the model-predicted Tm values over the 428 radiosonde stations at the surface level were 0.34 and 3.89 K, respectively; the mean bias and mean RMSE of the model's Tm values over all pressure levels in the height range from the surface to 10 km altitude were −0.16 and 4.20 K, respectively. The new model results were also compared with that of the GTrop and GWMT_D models in which different height correction methods were also applied. Results indicated that significant improvements made by the new model were at high-altitude pressure levels; in all five height ranges, GGNTm results were generally unbiased, and their accuracy varied little with height. The improvement in PWV brought by GGNTm was also evaluated. These results suggest that considering the vertical nonlinear variation in Tm and the temporal variation in the coefficients of the Tm model can significantly improve the accuracy of model-predicted Tm for a GNSS receiver that is located anywhere below the tropopause (assumed to be 10 km), which has significance for applications requiring real-time or near real-time PWV converted from GNSS signals.

Jujube–cotton intercropping system is a common efficient practice in China, especially in Xinjiang, Northwest China. While setting up two jujube–cotton intercropping systems, we planted two or four rows of cotton between two rows of jujube to study the formation of yield and factors influencing yield of 1-year jujube on intercropping cotton. The results indicated that photosynthetic/physiological characteristics of cotton in different planting patterns were significantly different only from the squaring stage to prophase of the boll opening stage, and the soil plant analyzer development value were not different all the time. Under the influence of jujube shading, the net photosynthetic rate, stomatal conductance, transpiration rate, and yield of cotton in a four-row cotton intercropping pattern (Int-4) and a two-row cotton intercropping pattern (Int-2) were significantly decreased compared with those of one-row cotton (Sole) and the intercellular CO2 concentration increased. There was no significant difference between Int-2 and Int-4 in above photosynthetic/physiological characteristics. The higher planting density makes the harvested number and boll number of Int-4 superior. Compared to the Int-2, the yield of Int-4 increased significantly by 10.50%, and the economic benefits from high to low were Int-4 > Int-2 > Sole. Therefore, we concluded that an appropriate increase of cotton planting density is beneficial to the high yield of cotton in a jujube–cotton intercropping system, because it is conducive to increasing the income of farmers.

This investigation is to concentrate on the effect of thermal radiation on free convection of a Cu-water nanofluid in a differentially heated cavity containing a solid square block placed in the middle. The upper and lower dividers of the cavity are kept as thermally protected; The coupled equations of mass, momentum, and energy are governed the mathematical model. Finite difference method is used to solve the governing equations. All internal surfaces of the cavity are deemed as a diffused emitters and reflectors for radiation. The impacts of relevant parameters, the Rayleigh number (103?Ra?106), volume fraction of nanoparticles (0.0???0.04) and thermal radiation (Rd = 0, 1, 5, and 10), are explored. For various values of the flow parameters, the values for local and average Nusselt number are calculated. It is observed that the local and averaged Nusselt numbers are increased with an increase in the Rayleigh number and volume fraction of nanoparticles. Also, the temperature distribution of the fluid increases with an increase in the radiation parameter.

Five strategies were recommended by the American Association of Clinical Endocrinologists/American College of Endocrinology (AACE/ACE) guidelines for the treatment of postmenopausal osteoporosis (PMO) patients with a very high fracture risk. We aimed to assess their cost-effectiveness in the United States (US).A microsimulation Markov model was created to compare the cost-effectiveness of five treatment strategies, including zoledronate, denosumab, abaloparatide, teriparatide, and romosozumab in PMO patients with a recent fracture from the healthcare perspective of the US. The data used in the model were obtained from published studies or online resources. Base-case analysis, one-way deterministic sensitivity analysis (DSA) and probability sensitivity analysis (PSA) were conducted for 65-, 70-, 75-, and 80-year-old patients.In base case, at 65 years, zoledronate was the cheapest strategy. The incremental cost-effectiveness ratios (ICER, which represent incremental costs per QALY gained) of denosumab, teriparatide, abaloparatide, and romosozumab against zoledronate were $13,020/QALY (quality-adjusted years), $477,331 /QALY, $176,287/QALY, and $98,953/QALY, respectively. Under a willing-to-pay (WTP, which means the highest price a consumer will pay for one unit of a good of service) threshold of $150,000/QALY, denosumab and romosozumab were cost-effective against zoledronate. The PSA results showed that denosumab was the most cost-effective option with WTP thresholds of $50,000/QALY, $100,000/QALY and $150,000/QALY. The results were similar in other age groups. The DSA results indicated that the most common parameters that have important influence on the outcome were drug persistence, incidence of adverse events, the efficacy of drugs on hip fractures and the cost of the drug.Among PMO patients with a very high fracture risk in the US, zoledronate is the cheapest strategy and denosumab is the most cost-effective choice among these five strategies.

The concern about gene doping has remained high in horseracing and other equestrian competitions. Our laboratory has previously developed a duplex quantitative polymerase chain reaction (qPCR) assay capable of detecting in equine blood the human erythropoietin (hEPO) transgene and equine tubulin α 4a (TUBA4A) gene as an internal control the latter providing quality control over DNA extraction and qPCR. This study aimed to optimize the method for routine testing of regulatory samples. The use of an automated DNA extraction system has increased the sample throughput, consistency of DNA extraction, and recovery of reference materials. The use of reduced concentration of primers and hydrolysis probe for internal control minimized their competition with transgene amplification and improved the assay sensitivity. Spike-in of an exogenous internal control at low concentration for plasma analysis has also been validated. Using the new workflow, four duplex qPCR assays have been developed for the detection of transgenes, namely, hEPO, human growth hormone (hGH), insulin-like growth factor 1 (hIGF-1), and equine EPO (eEPO). The estimated limits of detection (LODs) of each transgene were 2000 copies/mL of blood and 200 copies/mL of plasma. This method could detect the presence of transgene in blood and plasma collected from a horse administered intramuscularly (IM) with recombinant adeno-associated virus (rAAV) carrying the hEPO transgene. A longer detection time was observed in blood than in plasma. The methods have been applied to the screening of over a thousand official racehorse samples since June 2020 for the presence of these transgenes.

Ultrasonic vibration (UV) assisted forming technology has been proved beneficial for lowering manufacturing issues and improving the forming qualities of metallic products. However, the deformation behavior of ultrathin-walled microtube under the assistance of UV has not been clearly revealed due to the coupling effect of acoustic softening and size effect. In this research, UV assisted tensile test was performed on ultrathin superalloy sheets with different grain sizes to construct the constitutive model. The experimental results revealed that the grain size does not change the softening mechanism in ultrasonic-assisted microforming of ultrathin superalloy sheet. Whereas, the maximum acoustic softening value is shifted down with increasing grain size, indicating that the threshold of ultrasonic energy absorption is affected by grain size effect. A constitutive model considering the coupled effects of ultrasonic softening and crystal size was developed, and the logistic function is introduced into the acoustic term to describe the saturation of ultrasonic energy absorption. Based on the experimental and modeling results, the ultrasonic-assisted microdrawing process of the ultrathin-walled capillary was explored. The dimensional accuracy and surface appearance of the microformed capillary were significantly enhanced with increasing UV amplitude, and the ductility of capillaries after the UV assisted drawing is improved without loss of tensile strength under appropriate amplitude. Therefore, the ultrasonic-assisted microforming technology provides an efficient way for the coordinated regulation of forming quality and mechanical property of difficult-to-deform tubular micropart.

The final output signal quality of TDICCD is related to the key parameters such as working mode, output mode, signal-to-noise ratio, dynamic range and so on. We can improve these parameters of TDICCD by reasonably designing the sensor clocking. Therefore, this text discussed four methods of improved TDICCD sensor clocking to solve some problem in TDICCD application based on using the principle of TDICCD. The technique of TDICCD Taps merging can reduce the number of TDICCD Taps, which helps to reduce the size of the TDICCD rear-end circuit significantly; The technique of TDICCD continuous transfer clocking can improve the charge transfer efficiency, which helps to promote the final signal-to-noise ratio; The technique of pixel binning clocking can enlarge the dynamic range of image; The technique of TDICCD area-array working mode can extend the field of TDICCD working; The principle, derivation process, clocking sequence diagram and application range of these clocking design schemes are given in this paper. At the same time, it also explains its actual effect and the matters to be noted.

Background Studies report that survival outcomes in patients with non-muscle-invasive bladder cancer (NMIBC) are worse when cystectomy is delayed. However, no systematic evidence is available. Objective The aim of this study was to systematically review the literature to compare the long-term survival outcomes of patients with high-grade NMIBC (T1G3, including carcinoma in situ) who have early cystectomy compared to deferred radical cystectomy post-diagnosis. Materials and methods A systematic review was carried out by searching MEDLINE and related databases (Google Scholar, National Health Service Evidence) for all relevant studies published from 1946 to present. Additional studies were identified through following the references of relevant papers. Studies were included if they met the following criteria: inclusion of at least 30 patients having high-grade NMIBC, 2 groups treated with either early or deferred cystectomy with a clear temporal cut-off between groups and reported data on survival rate of at least 5 years. Results Literature was systematically reviewed, and 10 studies were included, totaling 1,516 patients who underwent either primary cystectomy or deferred cystectomy. It was found that patients who underwent early cystectomy show improved 5- to 10-year cancer-specific survival (relative risk = 0.81, p = 0.029) suggesting a significant survival benefit when compared to deferred cystectomy. Conclusions This study provides systematically gathered evidence showing benefit of early cystectomy. Despite this result, radical cystectomy greatly impairs quality of life and represents overtreatment for a significant minority. This result highlights the importance of a decisive treatment plan to minimize treatment delay.

The citral compound that contributes to the strong-lemony odour of lemongrass has high volatility and low physicochemical stability. To overcome the problems, the inclusion complex of the encapsulation technique was applied with rice starch as a coating material to improve the stability and protect against any unfavourable reaction. Therefore, this study was conducted to determine the structural characterization, citral retention and thermal properties of native rice starch, gelatinised rice starch, inclusion complex of rice starch–citral compound, and inclusion complex of rice starch–lemongrass extract. Lemongrass extract and standard citral compound were homogenised into rice starch dispersion at 80oC for 15 mins and freeze-dried at −50.0±2.0oC. The formation of the inclusion complex powder was determined using different analyses including morphological structure using the scanning electron microscope, crystallinity structure was determined with X-ray diffractometer, identification and quantification of citral compound using HS-SPME-GC-FID and the thermal properties of inclusion complex analyzed using differential scanning calorimetry. The microstructure of both inclusion complex of rice starch-lemongrass extract and rice starch-citral compound exhibited a laminated multiangular shape with crumble formation together with the characteristics of V-type pattern of crystalline complexes. The low degree of crystallinity of the inclusion complex of rice starch–lemongrass extract obtained high in citral entrapment (29.34±3.13%) with the highest concentration of citral retention (7.33±0.78 ppm). Both inclusion complex of rice starch-citral compound and rice starch-lemongrass extract displayed an endothermic peak at 138oC, which is attributed to an inclusion complex occurrence with significant difference (p