Search

Abstract Cranial radiation therapy (RT) for brain cancers is often associated with the development of radiation-induced cognitive dysfunction (RICD). RICD significantly impacts the quality of life for cancer survivors, highlighting an unmet medical need. Previous human studies revealed a marked reduction in plasma brain-derived neurotrophic factor (BDNF) post-chronic chemotherapy, linking this decline to a substantial cognitive dysfunction among cancer survivors. Moreover, riluzole (RZ)-mediated increased BDNF in vivo in the chemotherapy-exposed mice reversed cognitive decline. RZ is an FDA-approved medication for ALS known to increase BDNF in vivo. In an effort to mitigate the detrimental effects of RT-induced BDNF decline in RICD, we tested the efficacy of RZ in a cranially irradiated (9 Gy) adult mouse model. Notably, RT-exposed mice exhibited significantly reduced hippocampal BDNF, accompanied by increased neuroinflammation, loss of neuronal plasticity-related immediate early gene product, cFos, and synaptic density. Spatial transcriptomic profiling comparing the RT + Vehicle with the RT + RZ group showed gene expression signatures of neuroprotection of hippocampal excitatory neurons post-RZ. RT-exposed mice performed poorly on learning and memory, and memory consolidation tasks. However, irradiated mice receiving RZ (13 mg/kg, drinking water) for 6–7 weeks showed a significant improvement in cognitive function compared to RT-exposed mice receiving vehicle. Dual-immunofluorescence staining, spatial transcriptomics, and biochemical assessment of RZ-treated irradiated brains demonstrated preservation of synaptic integrity and mature neuronal plasticity but not neurogenesis and reduced neuroinflammation concurrent with elevated BDNF levels and transcripts compared to vehicle-treated irradiated brains. In summary, oral administration of RZ represents a viable and translationally feasible neuroprotective approach against RICD.

This research aimed to develop lead-free polymer composites based on poly-methyl methacrylate (PMMA) and embedded with tungsten carbide (WC) micro and nanoparticles for use in radiation protection applications. PMMA was filled with 20 %, 40 %, and 60 % by weight of WC micro- and nanoparticles. The shielding features of the proposed polymer mixtures were evaluated at different radioactive sources of different energies using the HPGe detector. The results revealed that the investigated composites containing micro and nano-structured WC particles showed superior radiation shielding at 81 keV due to the K-edge of the W element occurring at 69.5 keV. The findings also demonstrated that composites loaded with WC nanoparticles were more effective in shielding gamma radiation than those loaded with WC microparticles, even at the same filler wt.%. Furthermore, the sample containing 60 % by weight of nano-WC, coded as P-60nWC, had superior shielding performance than other polymer-based composites reported in the literature. Thus, the proposed nano-WC/PMMA composites can be effectively employed in radiation facilities as alternative environmentally and lead-free radiation shielding materials to protect people and the environment from the harmful risks of gamma radiation.

Abstract This study helps in managing waste glass and greening the environment by incorporating laboratory waste glass into mortar production to make an eco-friendly shielding material against gamma rays. The efficiency of using waste glass powder as a cement replacement or addition in mortar production was studied by using two waste glass sizes: micro glass (particle size range from 10.09 to 24.73 μm) and nano glass (particle size range from 10.57 to 26.42 nm) to design different mortar specimens with varying percentages of fine glass powder from 0 to 30%. Compressive strength and flexure strength were evaluated to determine mechanical properties. The results indicated that adding WGP to mortar positively affects the characteristics of cementitious composites. The linear and mass attenuation coefficients of the samples were experimentally determined using a NaI detector and various radioactive sources (Am-241, Ba-133, Eu-152, Cs-137, and Co-60) with gamma energies ranging from 59.53 to 1332 keV. The obtained coefficients were then compared to the theoretical values of the composites using XCOM software to verify their accuracy. Additionally, the half-value layer, tenth-value layer, mean free path, and effective atomic number were computed. Furthermore, the results revealed that the mortar sample with 30% nano additive glass was the most effective in reducing gamma radiation.

Abstract This study aims to investigate the effectiveness of iron oxide (Fe2O3) and carbon black in micro and nanoscales incorporated into an epoxy adhesive matrix for gamma-ray attenuation. The composites were prepared via a simple and cost-effective synthesis method. The grain size of powder NPs was measured using a transmission electron microscope (TEM), and the particle size was about 20 ± 5 nm and 31.46 ± 2 nm for carbon and Fe2O3, respectively. The morphological properties were characterized by a scanning electron microscope, which indicated the excellent dispersion of NPs, which blocked almost all pores of the composite and increased the capability of radiation attenuation. In addition, the chemical composition of samples using energy dispersive X-rays (EDX) and the compressive strength were measured. Furthermore, the linear and mass attenuation coefficients were determined experimentally for incident photon energies of 59.51–1408.01 keV emitted from γ-ray sources using the sodium iodide scintillation detector NaI. A comparison was conducted between the experimental data and theoretical results that obtained from XCOM software, examined the validity of the experimental results. The relation deviation rate was found to vary between 0.0008 and 2.83%. Furthermore, the measurement of the relation deviation rate between the linear attenuation coefficients of micro and nano composites revealed a range of values between 1 and 25%. Also, shielding parameters such as half-value layer (HVL), tenth-value layer (TVL), mean free path (MFP), and effective atomic number (Zeff) were measured. Moreover, the equivalent atomic number (Zeq), absorption, and exposure buildup factors for prepared samples were calculated. The results showed that the incorporation of Fe2O3 NPs enhanced the shielding capability of the composites, as evidenced by the significant reduction in gamma-ray transmission. The composite materials exhibited excellent mechanical strength, making them suitable for practical applications in radiation shielding. Furthermore, it was determined that the elevation in N-Fe2O3 concentration resulted in a direct increase in the linear attenuation coefficient, from 0.314 to 0.519 cm−1 at 0.5951 MeV and from 0.099 to 0.124 cm−1 at 0.662 MeV. Nevertheless, a slight increase was discerned in the identified mass attenuation coefficients at 0.1332 and 0.1408 MeV. The experimental data for MFP, HVL, and TVL demonstrate that the EFeC4 sample exhibits optimal performance, with values of 1.9, 1.3, and 4.4 cm at 0.5951 MeV, and at 0.661 MeV, the values are 8.04, 5.57, and 18.52 cm, while at 0.1408 MeV, the values are 12.06, 8.36, and 27.78 cm, respectively. Overall, this research highlights the potential of iron oxide-carbon/epoxy composites as efficient and reliable materials for gamma-ray protection in various fields, including nuclear power plants, medical facilities, and space exploration.

Abstract Melt quenching technique was used to create Bismuth Boro-Silicate nano glasses with compositions of 45SiO2-10CaO- 25Na2O- xBi2O3- (20-x) B2O3 (where x is 0, 5, 10, 15, and 20 mol %). Standard point sources AM-241, Ba-133, Co-60, Cs-137, and Eu-152 were used in the radiation experiment to evaluate the attenuation coefficients spanning the energy range of 59.51 keV to 1048.01 keV. The findings show that adding Bi2O3 in place of B2O3 increases the following: radiation protection efficiency (RPE%), transmission factor (TF%), absorption buildup factor values (ABF), exposure buildup factor values (EBF), mass attenuation coefficients (MACs), linear attenuation coefficients (LACs), and radiation protection efficiency (RPE%). In comparison to lead glass, these findings demonstrate the potential of nano Bismuth Boro-Silicate glass as a radiation shielding material.

Abstract Rice straw is considered an agricultural waste harmful to the environment, which is abundant in most parts of the world. From this point, the present study is devoted to preparing new composites of two types of glue based on rice straw as a plentiful, low-cost matrix. Straw glue samples were prepared by mixing 20% wt. of rice straw with 80% wt. of animal glue (RS-An) and polyvinyl acetate (RS-PVAC) at different thicknesses of 1, 2, and 3 cm. The chemical composition of the prepared samples was identified by energy dispersive X-ray analysis and their morphology was examined using a scanning electron microscope. The mechanical test explored that RS-An and RS-PVAC respectively required a stress of 25.2 and 25.5 MPa before reaching the breaking point. γ-ray shielding performance was analyzed and determined at numerous photon energies from 0.059 to 1.408 MeV emitted from five-point γ-rays sources using NaI (Tl). Linear attenuation coefficient was calculated by obtaining the area under the peak of the energy spectrum observed from Genie 2000 software in the presence and absence of the sample. The experimental results of mass attenuation coefficient were compared with theoretical data of XCOM software with relative deviation ranging from 0.10 to 2.99%. Geant4 Monte Carlo simulation code was also employed to validate the experimental results. The relative deviation of XCOM and Geant4 outcomes was 0.09–1.77%, which indicates a good agreement between them. Other radiation shielding parameters such as half value layer (HVL), tenth value layer, and mean free path were calculated in three ways: experimentally, theoretically from the XCOM database, and by simulation using Geant4 code. Additionally, effective atomic number (Zeff), effective atomic number (Neff), equivalent atomic number (Zeq), and buildup factors were evaluated. It was confirmed that the γ-ray shielding properties were further boosted by mixing rice straw with the animal glue compared to the synthetic one.

2-Guanidinobenzimidazole (BIG) and Imidiazole (I) ligands were utilized to synthesize Cu(II), VO(II), Ag(I), and Pd(II) as mixed ligand complexes. All studied molecules were characterized through various spectral, analytical and computational studies to find out their chemical structure. TGA was applied to identify the occurrence of H2O molecules besides the mono-nuclear property of isolated complexes. These complexes were proved through DFT study to confirm the coordinating site that was proposed and displays the optimal three-dimensional structures of the studied compounds. The binding affinity of the tested complexes with CT-DNA has been tested through agarose gel, electronic spectroscopy and viscosity measurements. Furthermore, the studied molecules might bind to CT-DNA electrostatically through exterior contact, replacement, intercalation and groove surface binding with good affinity. In-vitro anti-bacterial, anti-fungi, cytotoxic and antioxidant activities are performed for all studied compounds. MOE-docking simulation results indicate promising inhibitory features of BIGIPd complexes, in agreement with in-vitro results.

Abstract Radioactive iodine isotopes especially 131I are used for diagnosis and treatment of different types of cancer diseases. Due to the leak of radioactive iodine into the patient’s urine in turn, the wastewater would be contaminated, so it is worth preparing a novel adsorption green material to remove the radioactive iodine from wastewater efficiently. The removal of 127I and 131I contaminants from aqueous solution is a problem of interest. Therefore, this work presents a new study for removing the stable iodine 127I− and radioactive iodine 131I from aqueous solutions by using the novel nano adsorbent (Nano ZnO/MWCNTs) which is synthesized by the arc discharge method. It is an economic method for treating contaminated water from undesired dissolved iodine isotopes. The optimal conditions for maximum removal are (5 mg/100 ml) as optimum dose with shacking (200 rpm) for contact time of (60 min), at (25 °C) in an acidic medium of (pH = 5). After the adsorption process, the solution is filtrated and the residual iodide (127I−) is measured at a maximum UV wavelength absorbance of 225 nm. The maximum adsorption capacity is (15.25 mg/g); therefore the prepared nano adsorbent (Nano ZnO/MWCNTs) is suitable for treating polluted water from low iodide concentrations. The adsorption mechanism of 127I− on to the surface of (Nano ZnO/MWCNTs) is multilayer physical adsorption according to Freundlich isotherm model and obeys the Pseudo-first order kinetic model. According to Temkin isotherm model the adsorption is exothermic. The removal efficiency of Nano ZnO/MWCNTs for stable iodine (127I−) from aqueous solutions has reached 97.23%, 89.75%, and 64.78% in case of initial concentrations; 0.1843 ppm, 0.5014 ppm and 1.0331 ppm, respectively. For the prepared radio iodine (131I−) solution of radioactivity (20 µCi), the dose of nano adsorbent was (10 mg/100 ml) and the contact time was (60 min) at (pH = 5) with shacking (200 rpm) at (25 °C). The filtration process was done by using a syringe filter of a pore size (450 nm) after 2 days to equilibrate. The removal efficiency reached (34.16%) after the first cycle of treatment and the percentage of residual radio iodine was (65.86%). The removal efficiency reached (94.76%) after five cycles of treatment and the percentage of residual radio iodine was (5.24%). This last percentage was less than (42.15%) which produces due to the natural decay during 10 days.

Abstract In this study, highly selenite-resistant strains belonging to Brevundimonas diminuta (OK287021, OK287022) genus were isolated from previously operated single chamber microbial fuel cell (SCMFC). The central composite design showed that the B. diminuta consortium could reduce selenite. Under optimum conditions, 15.38 Log CFU mL-1 microbial growth, 99.08% Se(IV) reduction, and 89.94% chemical oxygen demand (COD) removal were observed. Moreover, the UV–visible spectroscopy (UV) and Fourier transform infrared spectroscopy (FTIR) analyses confirmed the synthesis of elemental selenium nanoparticles (SeNPs). In addition, transmission electron microscopy (TEM) and scanning electron microscope (SEM) revealed the formation of SeNPs nano-spheres. Besides, the bioelectrochemical performance of B. diminuta in the SCMFC illustrated that the maximum power density was higher in the case of selenite SCMFCs than those of the sterile control SCMFCs. Additionally, the bioelectrochemical impedance spectroscopy and cyclic voltammetry characterization illustrated the production of definite extracellular redox mediators that might be involved in the electron transfer progression during the reduction of selenite. In conclusion, B. diminuta whose electrochemical activity has never previously been reported could be a suitable and robust biocatalyst for selenite bioreduction along with wastewater treatment, bioelectricity generation, and economical synthesis of SeNPs in MFCs.

Abstract This study not only provides an innovative technique for producing rigid polyurethane foam (RPUF) composites, but it also offers a way to reuse metallurgical solid waste. Rigid polyurethane (RPUF) composite samples have been prepared with different proportions of iron slag as additives, with a range of 0–25% mass by weight. The process of grinding iron slag microparticles into iron slag nanoparticles powder was accomplished with the use of a high-energy ball mill. The synthesized samples have been characterized using Fourier Transform Infrared Spectroscopy, and Scanning Electron Microscope. Then, their radiation shielding properties were measured by using A hyper-pure germanium detector using point sources 241Am, 133 BA, 152 EU, 137Cs, and 60Co, with an energy range of 0.059–1.408 MeV. Then using Fluka simulation code to validate the results in the energy range of photon energies of 0.0001–100 MeV. The linear attenuation coefficient, mass attenuation coefficient, mean free path, half-value layer and tenth-value layer, were calculated to determine the radiation shielding characteristics of the composite samples. The calculated values are in good agreement with the calculated values. The results of this study showed that the gamma-ray and neutron attenuation parameters of the studied polyurethane composite samples have improved. Moreover, the effect of iron slag not only increases the gamma-ray attenuation shielding properties but also enhances compressive strength and the thermal stability. Which encourages us to use polyurethane iron-slag composite foam in sandwich panel manufacturing as walls to provide protection from radiation and also heat insulation.

Abstract This work evaluated the electrochemical, physical, biochemical, and molecular characterization of electrogens from a graphite felt anode when zinc oxide on activated carbon (ZnO/AC) was used as a cathodic electrocatalyst in a double-chambered microbial fuel cell (DCMFC). The electrochemical polarization behavior of the DCMFC showed that ZnO/AC had a higher power density (PDmax) of 89 mW m−2 with a corresponding cell current density (CD) of 248 mA m−2 and a voltage output of 395 mV, which was higher than those of the blank electrode used as a benchmark (PDmax of 68 mW m−2 at a CD of 161 mA m−2 and a voltage of 421 mV). Furthermore, scanning electron microscopy and transmission electron microscopy revealed that the morphology and interior properties of the strains varied among the rods (bacilli), spirals (vibrios), and spheres (diplococci, staphylococci and streptococci). In addition, biochemical characterization via the Vitek2 compact system and molecular analysis via 16 S rRNA and 18 S rRNA gene sequencing revealed the occurrence of nine prevalent species that were correlated with Sphingobacterium spiritivorum, Ochrobactrum anthropicus, Pseudomonas mendocina, Stenotrophomonas maltophilia, Leuconostoc mesenteroides, Staphylococcus equorum, Bacillus subtilis HQ334981.1, Kocuria kristinae KC581674.1 and Saccharomyces cerevisiae NR111007.1. Consequently, the present study outlines different characterization strategies for electrogenic microbes that play an important role in the overall performance of DCMFC for scaling up and managing existing environmental pollution for sustainable energy generation.

Abstract This research aimed to examine the radiation shielding properties of unique polymer composites for medical and non-medical applications. For this purpose, polymer composites, based on poly methyl methacrylate (PMMA) as a matrix, were prepared and reinforced with micro- and nanoparticles of ZrO2 fillers at a loading of 15%, 30%, and 45% by weight. Using the high purity germanium (HPGe) detector, the suggested polymer composites’ shielding characteristics were assessed for various radioactive sources. The experimental values of the mass attenuation coefficients (MAC) of the produced composites agreed closely with those obtained theoretically from the XCOM database. Different shielding parameters were estimated at a broad range of photon energies, including the linear attenuation coefficient (μ), tenth value layer (TVL), half value layer (HVL), mean free path (MFP), effective electron density (Neff), effective atomic number (Zeff), and equivalent atomic number (Zeq), as well as exposure buildup factor (EBF) and energy absorption buildup factor (EABF) to provide more shielding information about the penetration of γ-rays into the chosen composites. The results showed that increasing the content of micro and nano ZrO2 particles in the PMMA matrix increases μ values and decreases HVL, TVL, and MFP values. P-45nZ sample with 45 wt% of ZrO2 nanoparticles had the highest μ values, which varied between 2.6546 and 0.0991 cm−1 as γ-ray photon energy increased from 0.0595 to 1.408 MeV, respectively. Furthermore, the highest relative increase rate in μ values between nano and micro composites was 17.84%, achieved for the P-45nZ sample at 59.53 keV. These findings demonstrated that ZrO2 nanoparticles shield radiation more effectively than micro ZrO2 even at the same photon energy and filler wt%. Thus, the proposed nano ZrO2/PMMA composites can be used as effective shielding materials to lessen the transmitted radiation dose in radiation facilities.

Abstract Recently, there has been a surge of interest in the application of radiation-shielding materials. One promising research avenue involves using free-lead metal oxides/polymer composites, which have been studied for their radiation shielding and characterization properties. This study reinforced the dimethylpolysiloxane (silicone rubber) composites with micro- and nano-sized particles of tin oxide, cadmium oxide, and bismuth oxide as additive materials. The composites were tested with 20 and 50 weight fractions, and their attenuation coefficients were measured using a NaI(TI) detector at gamma-ray energies ranging from 59.54 to 1408.01 keV. Also, the thermal and mechanical properties of the composites were observed and compared with those of free silicone rubber. The results showed that the 50% nano metal oxide/SR composites exhibited better thermal stability and attenuation properties than the other composites, also possessing unique attributes such as lightweight composition and exceptional flexibility. Consequently, this composite material holds immense potential for safeguarding vital organs, including the eyes and gonads, during radiological diagnosis or treatment procedures. Its exceptional ability to absorb a significant portion of incident rays makes it an invaluable asset in the field of radiation protection.

Abstract Hexavalent chromium [Cr(VI)] is one of the most carcinogenic and mutagenic toxins, and is commonly released into the environemt from different industries, including leather tanning, pulp and paper manufacturing, and metal finishing. This study aimed to investigate the performance of dual chamber microbial fuel cells (DMFCs) equipped with a biocathode as alternative promising remediation approaches for the biological reduction of hexavalent chromium [Cr(VI)] with instantaneous power generation. A succession batch under preliminary diverse concentrations of Cr(VI) (from 5 to 60 mg L−1) was conducted to investigate the reduction mechanism of DMFCs. Compared to abiotic-cathode DMFC, biotic-cathode DMFC exhibited a much higher power density, Cr(VI) reduction, and coulombic efficiency over a wide range of Cr(VI) concentrations (i.e., 5–60 mg L−1). Furthermore, the X-ray photoelectron spectroscopy (XPS) revealed that the chemical functional groups on the surface of biotic cathode DMFC were mainly trivalent chromium (Cr(III)). Additionally, high throughput sequencing showed that the predominant anodic bacterial phyla were Firmicutes, Proteobacteria, and Deinococcota with the dominance of Clostridiumsensu strict 1, Enterobacter, Pseudomonas, Clostridiumsensu strict 11 and Lysinibacillus in the cathodic microbial community. Collectively, our results showed that the Cr(VI) removal occurred through two different mechanisms: biosorption and bioelectrochemical reduction. These findings confirmed that the DMFC could be used as a bioremediation approach for the removal of Cr(VI) commonly found in different industrial wastewater, such as tannery effluents. with simultaneous bioenergy production.

The evaluation of propulsion systems used in UAVs is of paramount importance to enhance the flight endurance, increase the flight control performance, and minimize the power consumption. This evaluation, however, is typically performed experimentally after the preliminary hardware design of the UAV is completed, which tends to be expensive and time-consuming. In this paper, a comprehensive theoretical UAV propulsion system assessment is proposed to assess both static and dynamic performance characteristics via an integrated simulation model. The approach encompasses the electromechanical dynamics of both the motor and its controller. The proposed analytical model estimates the propeller and motor combination performance with the overarching goal of enhancing the overall efficiency of the aircraft propulsion system before expensive costs are incurred. The model embraces an advanced blade element momentum theory underpinned by the development of a novel mechanism to predict the propeller performance under low Reynolds number conditions. The propeller model utilizes XFOIL and various factors, including post-stall effects, 3D correction, Reynolds number fluctuations, and tip loss corrections to predict the corresponding aerodynamic loads. Computational fluid dynamics are used to corroborate the dynamic formulations followed by extensive experimental tests to validate the proposed estimation methodology.

Abstract Herein, the adsorption of methyl orange (MO), a dangerous anionic dye, from an aqueous solution was investigated using a novel magnetic nanocomposite adsorbent. A nanocomposite entitled manganese chromium-layered double oxide/cobalt spinel ferrite, (MnCr)-LDO5wt.%/CoFe2O4, which links the interlayer structural characteristics of layered double oxides (LDOs) with the magnetic properties of spinel ferrites (SFs) was synthesized using the eco-friendly co-precipitation technique. Determination of structural parameters, crystallite size, and micro-strain was done using X-ray diffraction (XRD) analysis. Transmission electron microscopy (TEM) was used to determine grain shape and size. Surface analysis was performed using X-ray photoelectron spectroscopy (XPS) to identify elements and oxidation states present in the prepared nanocomposite. Vibrating sample magnetometer (VSM) was utilized to examine the magnetic characteristic. A comprehensive comparative study about the effectiveness and durability of CoFe2O4 and (MnCr)5wt.%/CoFe2O4 as nanoadsorbents for MO was conducted. Numerous variables, including contact time, MO concentration, adsorbent dosage, and pH were tested for their effects on the adsorption removal percentages. The findings showed that the maximum removal percentage was 86.1% for 25 ppm of MO was for 0.1 g/100 mL of (MnCr)-LDO5wt.%/CoFe2O4 at pH = 3. Investigations of isotherms and kinetics were conducted under batch conditions. The Langmuir isotherm matched the experimental data, for both nanoadsorbents, quite well due to the homogeneous distribution of active sites. Adsorption kinetics data were found to be compatible with intra-particle diffusion and pseudo-second order models for CoFe2O4 and (MnCr)5wt.%/CoFe2O4, respectively. A total of five adsorption–desorption cycles were performed to determine the prepared adsorbents’ recyclable nature.

Abstract Background The upflow anaerobic sludge blanket (UASB) reactors rely on bacterial communities to break down pollutants in wastewater (municipal or industrial). Methods and results In this study, a novel combination of UASB followed by aerobic treatment has been proposed for the treatment of municipal wastewater focusing on bacterial communities using high-throughput sequencing and parasite removal in this novel combination of reactors. Moreover, economic estimation of the compact unit composed of two overlapping UASB reactors, followed by a downflow hanging non-woven fabric (DHNW) reactor, the anaerobic baffled reactor (ABR), and chlorine unit was investigated in this study based on community populations of 1000 and 10,000 inhabitants, with a municipal plant capacity of 54,000 and 540,000 m3/year. Cost estimation was conducted based on two scenarios, one considering the contingency cost and auxiliary facility, and the other excluding them. Non-metric multidimensional scaling (nMDS) revealed that the treatment stages structured the microbial communities. Proteobacteria was the most prevalent phylum in all treatment stages, followed by Bacteroidota in most stages. Firmicutes and Actinobacteria were also present in significant amounts. The treatment system achieved from 40 to 66.67% removal of parasites (parasitic nematode, Cryptosporidium, and microsporidia). Redundancy analysis (RDA) indicated a strong positive correlation between chemical and biological oxygen demand (COD/BOD) with Campylobacterales and could be used as a bioindicator of treatment performance. Conclusion These findings can inform the development of more efficient and sustainable wastewater treatment systems that take into account microbial ecology and economic considerations.

Abstract This study investigates the gamma radiation shielding properties of cement–ball clay matrix composites doped with micro- and nano-sized cadmium oxide (CdO) particles. The linear attenuation coefficient (LAC) was determined using a sodium iodide (NaI) detector and five radioactive point sources with energies ranging from 59.5 to 1408 keV. The LAC values obtained were compared to the XCOM database and found to be in good agreement. The composites' half-value layer (HVL), tenth value layer (TVL), mean free path (MFP), effective atomic number (Zeff), equivalent atomic number (Zeq), and absorption buildup factor (EABF) were determined. The results showed that the addition of CdO particles improved the radiation-shielding behavior of the composites and increasing the weight fraction of CdO particles increased the shielding effectiveness. The results also illustrated that when nano-sized CdO particles were compared to their micro-sized counterparts, there was a significant enhancement in radiation shielding effectiveness. For instance, a composite material composed of 50% cement, 41.7% ball clay, and 3.8% nano CdO at an energy level of 0.0595 MeV exhibited a remarkable 12.2% increase in attenuation, surpassing the performance of the micro-sized sample with an equivalent concentration. Similarly, another composite consisting of 50% cement, 33.3% ball clay, and 16.7% nano CdO demonstrated a significant 15.4% increase in attenuation at the same energy level, when compared to the micro-sized sample. The study demonstrates the potential of CdO-doped cement–ball clay matrix composites for gamma radiation shielding applications.

Abstract Background The application of exopolysaccharide-producing bacteria (EPS) in dual chamber microbial fuel cells (DCMFC) is critical which can minimize the chemical oxygen demand (COD) of molasses with bioelectricity production. Hence, our study aimed to evaluate the EPS production by the novel strain Bacillus piscis by using molasses waste. Therefore, statistical modeling was used to optimize the EPS production. Its structure was characterized by UV, FTIR, NMR, and monosaccharides compositions. Eventually, to highlight B. piscis' adaptability in energy applications, bioelectricity production by this organism was studied in the BCMFC fed by an optimized molasses medium. Results B. piscis OK324045 characterized by 16S rRNA is a potent EPS-forming organism and yielded a 6.42-fold increase upon supplementation of molasses (5%), MgSO4 (0.05%), and inoculum size (4%). The novel exopolysaccharide produced by Bacillus sp. (EPS-BP5M) was confirmed by the structural analysis. The findings indicated that the MFC's maximum close circuit voltage (CCV) was 265 mV. The strain enhanced the performance of DCMFC achieving maximum power density (PD) of 31.98 mW m−2, COD removal rate of 90.91%, and color removal of 27.68%. Furthermore, cyclic voltammetry (CV) revealed that anodic biofilms may directly transfer electrons to anodes without the use of external redox mediators. Additionally, CV measurements made at various sweep scan rates to evaluate the kinetic studies showed that the electron charge transfer was irreversible. The SEM images showed the biofilm growth distributed over the electrode’s surface. Conclusions This study offers a novel B. piscis strain for EPS-BP5M production, COD removal, decolorization, and electricity generation of the optimized molasses medium in MFCs. The biosynthesis of EPS-BP5M by a Bacillus piscis strain and its electrochemical activity has never been documented before. The approach adopted will provide significant benefits to sugar industries by generating bioelectricity using molasses as fuel and providing a viable way to improve molasses wastewater treatment.

Abstract This work is an attempt to employ the electric arc furnace (EAF) slag as a by-product material to develop an alternative and environmentally friendly material for gamma-radiation protection applications such as in medical and industrial areas. For this purpose, different concentrations of micro-sized EAF slag (0, 20, 40, 60, 80, 100, 500, and 800 phr) were incorporated as fillers in the natural rubber (NR) matrix to produce the shielding composites. In addition, nano-sized EAF slag particles were prepared by using a high-energy ball milling technique to investigate the effect of particle size on the gamma-radiation shielding properties. The synthesized micro and nano EAF/NR composites were tested as protective materials against gamma-radiation by employing NaI(Tl) scintillation detector and standard radioactive point sources (152Eu, 137Cs, 133Ba, and 60Co). Different shielding parameters such as linear and mass attenuation coefficient, half value layer (HVL), tenth value layer, mean free path, effective atomic number (Zeff), and effective electron density (Neff) were determined to assess the radiation shielding capability of the EAF/NR composites. Furthermore, equivalent atomic number (Zeq) and the exposure buildup factor values for photon energy in the range from 0.015 to 15 MeV were also computed by Geometric Progression method. The experimental results of micro EAF/NR composites showed that at 121.78 keV, EAF0 composite (without EAF slag content) had the lowest μ value of 0.1695 cm−1, while the EAF800 composite (which was loaded with 800 phr of micro EAF slag) had the highest μ value of 0.2939 cm−1 at the same energy, which in turn decreases the HVL from 4.09 to 2.36 cm, respectively. Therefore, increasing the filler weight fractions of EAF slag in the NR matrix, increases the shielding properties of the composites. Moreover, the NR composite reinforced with 800 phr of nano EAF slag has better gamma-radiation shielding efficiency compared to that filled with 800 phr of micro EAF slag. The success of this work was to prepare a flexible, lightweight, low-cost, and lead-free material with better shielding capability.

Abstract Sheets of high-density polyethylene (HDPE) loaded with magnesium oxide in micro and nano were synthesized with different weight percentages of micro-MgO (0,5,10,20 and 30% by weight) and nano-MgO (5 and 30%) and shaped in form of disc and dog bone shape. The morphological, mechanical, and attenuation characteristics of each concentration were determined. The linear attenuation coefficients (LAC) of the prepared discs were calculated using a well-calibrated scintillation detector and five standard gamma-ray point sources (241Am, 133Ba, 137Cs, 60Co and 152Eu). The LAC was theoretically calculated for HDPE/micro-MgO composites using XCOM software. A good agreement between the theoretical and experimental results was observed. The comparison between micro and nano-MgO as a filler in HDPE was evaluated. The results proved that the loaded nano-MgO in different proportions of HDPE produced greater attenuation coefficients than its micro counterpart. The addition of nano MgO with different weight percentage led to a significant improvement in the mechanical properties of HDPE, the ultimate force and ultimate stress increased as the concentration of nano MgO increased, and the young modulus of HDPE also increased with increasing concentration of micro and nano MgO.

Abstract This paper introduces a new approach of testing piezoelectric nanofibers as antibacterial mat. In this work, both Polyvinylidene fluoride (PVDF) and PVDF embedded with thermoplastic polyurethane nanofibers are synthesized as nanofibers mat via electrospinning technique. Then, such mat is analyzed as piezoelectric material to generate electric voltage under different mechanical excitations. Furthermore, morphological and chemical characteristics have been operated to prove the existence of beta sheets piezoelectricity of the synthesized nanofibers mats. Then, the synthesized nanofibers surfaces have been cyclically stretched and exposed to bacteria specimen. It has been noticed that the generated voltage and the corresponding localized electric field positively affect the growth of bacteria and reduces the formation of K. penomenue samples bacteria colonies. In addition, the effect of both stretching frequency and pulses numbers have been studied on the bacteria count, growth kinetics, and protein leakage. Our contribution here is to introduce an innovative way of the direct impact of the generated electric field from piezoelectric nanofibers on the reduction of bacteria growth, without depending on traditional anti-bacterial nanoparticles. This work can open a new trend of the usability of piezoelectric nanofibers through masks, filters, and wound curing mats within anti-bacterial biological applications.

Abstract In this work, morphological and attenuation parameters of gamma ray protection were studied. Dimethyl polysiloxane (Silicon Rubber) Mixed with micro-size and nano-size lead oxide particles at different weight percentage were prepared. The morphological structure of PbO/SR composites was investigated by SEM test, according to SEM images the nano PbO particles are more uniform micro PbO particles. The radiation attenuation test was carried out using 3ʺ × 3ʺ NaI (TI) detector for (Am-241), (Cs-137), (Co-60), (Ba-133), and (Eu-152). The effect on attenuation property of SR-PbO shown that the increase of PbO filler significantly increases the linear attenuation coefficient and improve the other radiation protection parameters especially at low gamma energy. It's found that a significant agreement between the experimental result and theoretical result from Xcom program. In this study it's found matrix filled with nano-PbO have higher gamma shielding ability compared to micro-PbO matrix at the same filler concentration. It can say that SR-nano PbO has a higher radiation protection than SR-micro PbO compositions.

In the current study, the PbO compound was used in order to optimize the gamma-ray shielding properties of the polypropylene polymers. A series of polypropylene doped PbO were performed using various PbO concentrations varied between 0 and 50 wt%. The experimental measurement for the density of the fabricated sample showed that the samples’ density varied between 0.902 ± 0.004 and 1.645 ± 0.007 g/cm3, raising the PbO doping concentration between 0 wt% and 50 wt%. Furthermore, the scanning electron microscope was utilized to illustrate the distribution and morphology of the fabricated polypropylene doped PbO concentrations. The gamma-ray shielding capacity of the fabricated polypropylene doped PbO was examined and evaluated experimentally using a sodium iodide scintillation detector and different point sources in the gamma-ray energy interval between 0.059 and 1.408 MeV. The experimental results were affirmed via the Geant4 code, which depended on the Monte Carlo simulation. The difference recorded between the experimental and Geant4 calculations for the fabricated samples shielding properties was lies in between ±4%. The recorded linear attenuation coefficient at gamma-ray energy of 0.244 MeV varied between 0.1148 and 0.5837 cm−1, raising the PbO doping concentration between 0 wt% and 50 wt%. Moreover, the half-value thickness decreased with increasing the PbO doping ratio.

Carbon nanotubes (CNTs) are considered as a promising nanomaterial for a variety of applications. It has desirable physicochemical characteristics of high surface area, superior mechanical and thermal strength, and electrochemical activity. In this study, CNTs decorated with silver nanoparticles (AgNPs) were manufactured by an arc discharge technique. As a result, etching produces stable AgNPs-CNTs aqueous suspensions of pure silver and carbon electrodes in ethanol vapor condensed in water. UV- visible photometer, x-ray Diffraction, transmission electron microscope, and energy dispersive x-ray characterized the synthesized AgNPs-CNTs. The synthesized AgNPs-CNTs crystals showed CNTs formation of an average 9.5 nm, with intermediate length position of about 75.8 nm decorated by homogeneous spherical AgNPs of average size 15.2 nm. The antibacterial efficiency of AgNPs-CNTs against Pseudomonas aeruginosa was established at a series of concentrations (45 g ml ^−1 : 0.0879 g ml ^−1 ) while values for the MIC and MBC were determined. The MIC and MBC levels were found to be (>5.625 μ g ml ^−1 ) and (>11.25 μ g/ml) respectively. The bacteria cytotoxicity was evaluated through LDH and protein leakage levels. Treated samples with 3.2 μ g ml ^−1 AgNPs-CNTs revealed significant injuries in the cell membrane by two times greater in LDH and protein leakage levels than samples treated by 5.0 μ g ml ^−1 AgNPs. Results in this work substantiate the synergistic effect of combining AgNPs with CNTs to enhanced antibacterial properties and performance compared to AgNPs alone. The efficiency of using synthesized AgNPs-CNTs showed high antibacterial potential against Pseudomonas aeruginosa in a concentration-dependent manner. The arc discharge method can be adapted to incorporate different materials or change the synthesis conditions, allowing for the production of AgNPs-CNTs with tailored properties for specific applications.

The aim of this work is to study the radiation shielding properties of cement samples with waste glass incortated into its composition. The mass attenuation coefficient (MAC) of the samples were experimentally determined to evaluate their radiation shielding ability. The experimental coefficient was evaluated using NaI detector for gamma energies between 59.53 keV and 1408.01 keV using different radioactive point sources Am-241, Eu-152, Co-60, and Cs-137, and the gamma transmission parameters half-value layer, mean free path, and transmission factor were calculated. The theoretical coefficient of the composites was determined using Geant4 and XCOM software. The results were also compared against Geant4 and XCOM simulations by calculating the relative deviation between the values to determine the accuracy of the results. In addition the mechanical properties (including Compressive and porosity) as well as the thermogravimetric analysis were tested for the present samples. Overall, it was concluded that the cement sample with 50% waste glass has the greatest shielding potential for radiation shielding applications and is a useful way to reuse waste glass.

Abstract Background Although microbial fuel cells (MFCs) represent a promising technology for capturing renewable energy from wastewater, their scaling-up is significantly limited by a slow-rate cathodic oxygen reduction reaction (ORR) and the development of a resilient anodic microbial community. In this study, mixed transition metal oxides of nickel and copper (Ni and Cu), supported on a graphene (G) (NiO–CuO/G) electrocatalyst, were synthesized and tested as a cost-effective cathode for ORR in MFCs. Electrochemical measurements of electrocatalyst were conducted using a rotating disk electrode (RDE) and linear sweep voltammetry (LSV) in a neutral electrolyte, and compared with a benchmark Pt/C catalyst. Furthermore, the long-term performance of the as-synthesized electrocatalyst was evaluated in a single-chamber MFC by measuring organic matter removal and polarization behavior. The successful enrichment of electroactive biofilm was also monitored using transmission electron microscopy and the Vitek2 compact system technique. Results When compared with the benchmark platinum cathode, the NiO–CuO/G electrocatalyst exhibited high selectivity toward ORR. The rotating disk electrode (RDE) experiments reveal that ORR proceeds via a 4-electron ORR mechanism. Furthermore, the NiO–CuO/G electrocatalyst also exhibited a high power density of 21.25 mW m−2 in an air-cathode MFC, which was slightly lower than that of Pt/C-based MFC (i.e., 50.4 mW m−2). Biochemical characterization of the most abundant bacteria on anodic biofilms identified four genera (i.e., Escherichia coli, Shewanella putrefaciens, Bacillus cereus, and Bacillus Thuringiensis/mycoides) that belonged to Gammaproteobacteria, and Firmicutesphyla. Conclusions This study demonstrates that the NiO–CuO/G cathode had an enhanced electrocatalytic activity toward ORR in a pH-neutral solution. This novel mixed transition metal oxide electrocatalyst could replace expensive Pt-based catalysts for MFC applications.

Abstract Pregnant women are potentially more susceptible to respiratory tract infections making them a high‐risk group. We describe the successful management of a 35‐year‐old pregnant woman, G3, P1, with a history of a cesarean section who tested positive for COVID‐19 at 26 weeks and required critical care support.

Abstract Background The development of powerful and flexible management addresses is due to the improvement of deeply reliable gadgets and the advancement of the concept of cellular. The cellular principle was a major way of solving the wavelength crowding problem and the user capacity. It offered high capacity without major technological changes with limited allocation in spectrum. Wireless communication is an innovation in media transmission that allows remote transmission in all types of terrain between convenient gadgets. For estimating a transmitter 's radio coverage area, propagation models that anticipate the mean signal strength for an arbitrary transmitter–receiver separation distance are crucial as they are called large-scale propagation models so even though they define the average signal strength over long periods of time and large distances from the transmitter. Results Developed propagation models are presented according to the measured path loss values in exemplary urban and suburban areas at the operating frequency of 3.5 ghz by using the regression analysis. The measurements are implemented by using a spectrum analyzer FSH6 to get the channel response as shown in the stated tables and graphs. Based on the obtained results, it was observed that the path loss could be calculated as a function of distance and during the practical measurements 32 m was precise as a presumption for the break point distance. The values of path loss exponent (n) are defined and calculated for both of urban and suburban regions. Measurements results are analyzed and compared in order to study their influence for every specific environment. It was noticed that any radio signal will suffer attenuation when it travels from the transmitter to the receiver as a variety of various phenomena give rise to this radio path loss. Conclusions The interaction between both the electromagnetic radiation and the environment tends to decrease the quality of the signal being sent from the transmitter to the destination which causes the loss of the path. Propagation models are the basis for channel estimation, as they attempt to identify how a radio transmission changes from the transmitter to the receiver throughout its path. The gained results from this research will be supportive for the arrangement of network planners and researchers as proof and directory materials before future location establishment.

Abstract Background Microalgae cells can be identified as a potential source for new and renewable energy. The economic investigation for biodiesel and bio-active compound production from the microalgae community (Bloom), which are collected from the high rate algal pond (HRAP) constructed to treat municipal wastewater at Zenin wastewater treatment plant, Giza, was the main target of study. Results The microscopical examination showed that Scenedesmus obliquus is the dominant species. The total carotenoids were extracted using jojoba oil and determined by high-performance liquid chromatography (HPLC) to reach 81.44 μg/g. The biodiesel production through acid transesterification reaction recorded 70.6% of fatty acid methyl ester content with high cetane number (44) and low acid value. Such results prove that the obtained biodiesel has better ignition quality. The total phenolic and flavonoid compounds have been derived from the remaining biomass to give 5.36 ± 0.03 and 1.50 ± 0.19 mg/g respectively. Finally, total proteins and carbohydrates content in algal cells were recorded 54.3 and 1.5 mg/g successively Conclusion The preliminary economic evaluation showed that the production of biodiesel and carotenoids from the microalgae growing in municipal wastewater can be considered, as a techno-economic feasible process.

Abstract Engineering of structure and composition is essential but still challenging for electrocatalytic activity modulation. Herein, hybrid nanostructured arrays (HNA) with branched and aligned structures constructed by cobalt selenide (CoSe2) nanotube arrays vertically oriented on carbon cloth with CoNi layered double hydroxide (CoSe2@CoNi LDH HNA) are synthesized by a hydrothermal‐selenization‐hybridization strategy. The branched and hollow structure, as well as the heterointerface between CoSe2 and CoNi LDH guarantee structural stability and sufficient exposure of the surface active sites. More importantly, the strong interaction at the interface can effectively modulate the electronic structure of hybrids through the charge transfer and then improves the reaction kinetics. The resulting branched CoSe2@CoNi LDH HNA as trifunctional catalyst exhibits enhanced electrocatalytic performance toward oxygen evolution/reduction and hydrogen evolution reaction. Consequently, the branched CoSe2@CoNi LDH HNA exhibits low overpotential of 1.58 V at 10 mA cm−2 for water splitting and superior cycling stability (70 h) for rechargeable flexible Zn‐air battery. Theoretical calculations reveal that the construction of heterostructure can effectively lower the reaction barrier as well as improve electrical conductivity, consequently favoring the enhanced electrochemical performance. This work concerning engineering heterostructure and topography‐performance relationship can provide new guidance for the development of multifunctional electrocatalysts.

Both Micro 0.5 µm and Zero valent aluminum nanoparticles 30 nm were prepared by Arc discharge technique to evaluate the efficiency of radiation detectors, where the protective layer from bulk aluminum gamma is replaced by nanoparticle aluminum layer. As well known the efficiency of the detector depends on the number of photons reach the sensitive volume of the detector. To achieve this aim Micro and nano aluminum samples were prepared, and their linear attenuation coefficients (LAC) were experimentally determined. The LAC of micro Al was compared with theoretical values obtained from XCOM and the results proved that the experimental data could adequately be used to evaluate the shielding ability of the Al samples. The results also demonstrated that at all energies, nano Al had a lower LAC. This means in the case of nano Al, the absorption of photons is lower compared to the presence of micro Al. The ratio between the number of counts in the presence of an aluminum sample (micro and nano) to the number of counts in the absence of sample was calculated. At low, moderate, and high energies and it showed that nano Al had a greater and better ratio at all energy ranges. Thus, it was concluded that aluminum nanoparticles can be used sufficiently in detectors instead of aluminum microparticles (Al-Protecting layer) to enhance their ability to detect incoming photons, especially at low energies.

Abstract Background Dielectric properties and ac conductivity were studied and correlated with the structure of a series of YBCO ceramic, doped with different doping levels ranging from 0.1 to 0.5 wt.% of magnetic nano-metal oxides, namely Mn3O4, Co3O4, and Cr2O3. The most important feature of this study was the ultrahigh values of dielectric constants at a low frequency, exactly 50 Hz. We found that the undoped YBCO has a value of ε′ equal to 6.99 × 106 at 50 Hz at room temperature which was increased to 1.09 × 108 at 120 °C, higher than any other ferroelectric material. Moreover, the value of ε′ depends on the nature and the value of the magnetic moment of the doped metal oxides. The value of ε′ is at least three orders of magnitude greater than any previously studied composites which suggest that this perovskite ceramic material can be used to create electrostatic capacitors with energy far better than the best electrode double-layer capacitors (EDLC). Additionally, ac electrical conductivity has two frequency-dependent regions, the low frequency, where σ ac is independent of frequency, and the high-frequency region where dispersion occurs. The ac conductivity measurement with frequency leads us to conclude that the conduction mechanism in the studied samples can be correlated barrier hopping (CBH) model. Results The dielectric properties of undoped YBCO ceramics at 50 Hz in temperature ranging from room temperature to 120°C were studied. It is obvious that the dielectric constant and dielectric loss of YBCO decrease with increase in frequency and temperature. It can be noticed that dielectric constant of YBCO increases at 50 Hz from 6.99 × 106 at room temperature to 1.09 × 108 at 120°C. The high values of ε′ recorded for YBCO doped with Mn3O4 varied from 9.45 × 105 to 15.5 at room temperature and 1.34 × 105 to 9.242 at 1 MHz at 120°C. For doped YBCO with Co3O4, the values of ε\ varied from 9.5 × 105 at 50 Hz to 13.24 at 1 MHz at room temperature, with changes from7.8 × 104 at 50 Hz to 53.42 at 1 MHz. For YBCO ceramic samples doped with Cr2O3, ε′ varied from 1.138 × 106 at 50 Hz to 8.38 × 103 at 1 MHz at room temperature and from 5.935 × 105 at 50 Hz to 3.53 × 103 at 1 MHz at 120°C. The ac conductivity was further studied for undoped YBCO and doped YBCO with 0.1 wt.% of nano-metal oxide of Cr2O3, Co3O4, and Mn3O4 samples. For all the studied samples, we found σ ac is typically specified to the hopping conduction and ac conductivity has a power law behavior in terms of frequency (ω). In general, there are two frequency-dependent regions for all the studied ceramic samples; in the low-frequency region, σ ac is independent of frequency whereas in the high-frequency region, dispersion occurs. The change in microwave conductivity of the studied samples with frequency (1–5 MHz) is shown in Fig. 5. It is observed that for all samples, the conductivity increases with temperatures and depends on the doped metal oxide. The values of σ ac at 5 MHz varied from − 0.4 to 1.2 for undoped YBCO, from − 0.98 to − 0.75 for 0.1 wt.%Mn3O4-YBCO sample, from − 0.25 to 0.2 for 0.1 wt.% Co2O3-YBCO sample, and from − 0.4 to 0.6 for 0.1 Wt.% Cr3O4-YBCO sample. Conclusion The primary finding in this paper is of empirical investigation. YBCO, which is a high-temperature superconductor, has a high dielectric constant ε′ ranging from 6.99 × 106 at room temperature to 1.09 × 108 at 120°C. This value is at least three orders of magnitude greater than any previously studied composites which suggest that this perovskite ceramic material can be used to create electrostatic capacitors with energy far more efficient than the best electrode double layer capacitors (EDLC).

A new mathematical solution for the geometrical and total efficiencies integrable equations of cylindrical and spherical gamma-ray detectors is proposed. The efficiencies integrable equations are based on the accurate analytical computation of the photon path length traverses within the detector active medium, and the geometrical solid angle, Ω, subtended by the source to the detector at the point of entrance. The comparison between the efficiencies calculated values by the use of both, the integrable and direct solution formulae, showing very good agreement.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.