Search

Photogeologic principles can be used to suggest possible sequences of events that result in the present planetary surface. The most common method of evaluating the absolute age of a planetary surface remotely is to count the number of impact craters that have occurred after the surface formed, with the assumption that the craters occur in a spatially random fashion over time. Using additional assumptions, craters that have been partially modified by later geologic activity can be used to assess the time frames for an interpreted sequence of events. The total number of craters on Venus is low and the spatial distribution taken by itself is nearly indistinguishable from random. The overall implication is that the Venusian surface is much closer to Earth in its youthfulness than the other, smaller inner solar system bodies. There are differing interpretations of the extent to which volcanism and tectonics have modified the craters and of the regional and global sequences of geologic events. Consequently, a spectrum of global resurfacing views has emerged. These range from a planet that has evolved to have limited current volcanism and tectonics concentrated in a few zones to a planet with Earth-like levels of activity occurring everywhere at similar rates but in different ways. Analyses of the geologic record have provided observations that are challenging to reconcile with either of the endmember views. The interpretation of a global evolution with time in the nature of geologic activity relies on assumptions that have been challenged, but there are other observations of areally extensive short-lived features such as canali that are challenging to reconcile with a view of different regions evolving independently. Future data, especially high-resolution imaging and topography, can provide the details to resolve some of the issues. These different global-evolution viewpoints must tie to assessments of present-day volcanic and tectonic activity levels that can be made with the data from upcoming missions., Space Science Reviews, 219 (4), ISSN:1572-9672, ISSN:0038-6308

The Space Exploration Synthetic Aperture Radar (SESAR) is a P-band radar instrument for planetary applications being developed at the NASA Goddard Space Flight Center (GSFC). This radar will enable unprecedented surface and near-subsurface measurements of planetary bodies including the Moon, Mars, and asteroids. The radar will measure full polarimetry at meter-scale resolution while featuring a low power, lightweight, beamforming design, specifically developed to meet stringent requirements of planetary instruments. The ongoing prototype development is maturing the SESAR technology for upcoming planetary mission opportunities.

Lobate debris aprons (LDA), lineated valley fill (LVF), and concentric crater fill (CCF) on Mars, interpreted to be debris-covered glaciers, possess craters with a suite of distinct interior landforms (called “ring-mold craters”) that have been attributed to the presence of glacial ice at depth or surface modification processes. We tested current hypotheses for the formation of ring-mold craters by conducting a comprehensive analysis of the size and morphology of 16,457 impact craters ≥125 m in diameter formed within glacial deposits in Deuteronilus Mensae. Two major groups, bowl-shaped craters and ring-mold craters, are found, with at least nine distinct crater types. While there is statistical difference in median diameters between these crater types, this difference is relatively small and is within the estimated uncertainty in diameter measurements and may be related to more enhanced erosion of the rims of ring-mold craters. Clear degradation sequences are observed, supporting a role for post-impact modification in producing at least some of the diversity in crater landforms. The spatial density of ring-mold craters is also directly correlated with the development of LDA, LVF, and CCF surface textures. Flow lineations cross-cut two ring-mold crater types but they maintain their circular planforms in some cases, suggesting that the craters initially formed completely within mantling layers deposited after glacial flow had ceased. We also find analogous craters in non-glacial units; glacial ice is therefore not required to form the observed morphologic diversity. Our observations are most consistent with formation of crater landforms by emplacement and modification of at least two depositional episodes of icy dust (i.e., “mantle”). This mantle was initially tens of meters in thickness to support crater formation, and has experienced much downwasting and erosion since emplacement. Derived crater retention ages of 460 Ma for LDA, LVF, and CCF features in the region therefore reflect deposition of mantle units and only give a very minimum age for the formation of LDA, LVF, and CCF.

Geomorphic and geophysical evidence supports a debris-covered glacier origin for a suite of landforms at the mid-latitudes of Mars, including lobate debris aprons (LDA), lineated valley fill (LVF), and concentric crater fill (CCF). These large reservoirs of ice and their near-surface structure provide a rich record for understanding the planet's climate and history of global volatile exchange over the past billion years. LDA, LVF, and CCF are also potential sites for future robotic and human missions but the accessibility of glacial ice for direct sampling and in situ resource utilization depends largely on the geotechnical properties of the surface debris (“supraglacial debris”), including its thickness, grain sizes, and density structure. The physical properties of this supraglacial debris layer have been poorly constrained. We use images of morphology, digital elevation models, thermal inertia data, and radar sounding data to probe the near surface of LDA, LVF, and CCF in Deuteronilus Mensae in order to place constraints on the sources, grain sizes, thickness, and stratigraphy of supraglacial debris. We find evidence for at least a two-layer stratigraphy. Layered mantle consisting of atmospherically emplaced dust and ice superposes boulder-rich sediment sourced by rockfalls glacially transported downslope. High thermal inertia, boulder-rich termini and debris bands reminiscent of medial moraines are found throughout the study region, supporting a rockfall origin for at least a fraction of the debris exposed at the surface. This supraglacial debris layer would have thickened with time from sublimation of glacial ice and liberation of englacial sediment and dust. At present, the entire supraglacial debris package is a minimum of a few meters in thickness and is likely tens of meters in thickness in many locations, possibly thinning regionally at lower latitudes and locally thinning toward the headwalls. The lack of terracing or interior structures in craters formed within LDA, LVF, and CCF and the absence of near-surface reflectors in SHARAD radar data further suggest that no strong contrasts in permittivity or strength occur at the interface of the layers.

On Venus, relatively young deposits near volcanic and coronal summits with unique radar characteristics have been proposed to be emplaced by pyroclastic density currents (PDCs). The proposed units ...

The Space Exploration Synthetic Aperture Radar (SESAR) is a new P-band radar instrument development for planetary applications that will enable unprecedented surface and near-subsurface measurements of planetary bodies including the Moon, Mars, and asteroids. The radar will measure full polarimetry at meter scale resolution, and achieve beam agility through programmable digital beamforming architecture. The radar features a low power, lightweight, modular design, specifically developed to meet stringent launch and operation requirements of planetary instruments. A prototype SESAR system is currently being developed under NASA's MATISSE (Maturation of Instruments for Solar System Exploration) program.

In its polar layered deposits (PLD), Mars possesses a record of its recent climate, analogous to terrestrial ice sheets containing climate records on Earth. Each PLD is greater than 2 ​km thick and contains thousands of layers, each containing information on the climatic and atmospheric state during its deposition, creating a climate archive. With detailed measurements of layer composition, it may be possible to extract age, accumulation rates, atmospheric conditions, and surface activity at the time of deposition, among other important parameters; gaining the information would allow us to “read” the climate record. Because Mars has fewer complicating factors than Earth (e.g. oceans, biology, and human-modified climate), the planet offers a unique opportunity to study the history of a terrestrial planet’s climate, which in turn can teach us about our own planet and the thousands of terrestrial exoplanets waiting to be discovered. During a two-part workshop, the Keck Institute for Space Studies (KISS) hosted 38 Mars scientists and engineers who focused on determining the measurements needed to extract the climate record contained in the PLD. The group converged on four fundamental questions that must be answered with the goal of interpreting the climate record and finding its history based on the climate drivers. The group then proposed numerous measurements in order to answer these questions and detailed a sequence of missions and architecture to complete the measurements. In all, several missions are required, including an orbiter that can characterize the present climate and volatile reservoirs; a static reconnaissance lander capable of characterizing near surface atmospheric processes, annual accumulation, surface properties, and layer formation mechanism in the upper 50 ​cm of the PLD; a network of SmallSat landers focused on meteorology for ground truth of the low-altitude orbiter data; and finally, a second landed platform to access ~500 ​m of layers to measure layer variability through time. This mission architecture, with two landers, would meet the science goals and is designed to save costs compared to a single very capable landed mission. The rationale for this plan is presented below. In this paper we discuss numerous aspects, including our motivation, background of polar science, the climate science that drives polar layer formation, modeling of the atmosphere and climate to create hypotheses for what the layers mean, and terrestrial analogs to climatological studies. Finally, we present a list of measurements and missions required to answer the four major questions and read the climate record. 1. What are present and past fluxes of volatiles, dust, and other materials into and out of the polar regions? 2. How do orbital forcing and exchange with other reservoirs affect those fluxes? 3. What chemical and physical processes form and modify layers? 4. What is the timespan, completeness, and temporal resolution of the climate history recorded in the PLD?

The Radar Imager for Mars’ Subsurface Experiment (RIMFAX) is a Ground Penetrating Radar on the Mars 2020 mission’sPerseverancerover, which is planned to land near a deltaic landform in Jezero crater. RIMFAX will add a new dimension to rover investigations of Mars by providing the capability to image the shallow subsurface beneath the rover. The principal goals of the RIMFAX investigation are to image subsurface structure, and to provide information regarding subsurface composition. Data provided by RIMFAX will aid Perseverance’s mission to explore the ancient habitability of its field area and to select a set of promising geologic samples for analysis, caching, and eventual return to Earth. RIMFAX is a Frequency Modulated Continuous Wave (FMCW) radar, which transmits a signal swept through a range of frequencies, rather than a single wide-band pulse. The operating frequency range of 150–1200 MHz covers the typical frequencies of GPR used in geology. In general, the full bandwidth (with effective center frequency of 675 MHz) will be used for shallow imaging down to several meters, and a reduced bandwidth of the lower frequencies (center frequency 375 MHz) will be used for imaging deeper structures. The majority of data will be collected at regular distance intervals whenever the rover is driving, in each of the deep, shallow, and surface modes. Stationary measurements with extended integration times will improve depth range and SNR at select locations. The RIMFAX instrument consists of an electronic unit housed inside the rover body and an antenna mounted externally at the rear of the rover. Several instrument prototypes have been field tested in different geological settings, including glaciers, permafrost sediments, bioherme mound structures in limestone, and sedimentary features in sand dunes. Numerical modelling has provided a first assessment of RIMFAX’s imaging potential using parameters simulated for the Jezero crater landing site.

Lucus Planum, extending for a radius of approximately 500 km around 181° E, 5° S, is part of the Medusae Fossae Formation (MFF), a set of several discontinuous deposits of fine-grained, friable material straddling across the Martian highland-lowland boundary. The MFF has been variously hypothesized to consist of pyroclastic flows, pyroclastic airfall, paleopolar deposits, or atmospherically-deposited icy dust driven by climate cycles. MARSIS, a low-frequency subsurface-sounding radar carried by ESA's Mars Express, acquired 238 radar swaths across Lucus Planum, providing sufficient coverage for the study of its internal structure and dielectric properties. Subsurface reflections were found only in three areas, marked by a distinctive surface morphology, while the central part of Lucus Planum appears to be made of radar-attenuating material preventing the detection of basal echoes. The bulk dielectric properties of these areas were estimated and compared with those of volcanic rocks and ice-dust mixtures. Previous interpretations that east Lucus Planum and the deposits on the north-western flanks of Apollinaris Patera consist of high-porosity pyroclastic material are strongly supported by the new results. The north-western part of Lucus Planum is likely to be much less porous, although interpretations about the nature of the subsurface materials are not conclusive. The exact origin of the deposits cannot be constrained by radar data alone, but our results for east Lucus Planum are consistent with an overall pyroclastic origin, likely linked to Tharsis Hesperian and Amazonian activity.

The Mini-RF radar, launched on the Lunar Reconnaissance Orbiter, imaged the lunar surface using hybrid-polarimetric, transmitting one circular polarization and receiving linear H and V polarizations. Earth-based radar operating at the same frequency has acquired data of the same terrains using circular-polarized transmit waves and sampling circular polarizations. For lunar targets where the viewing geometry is nearly the same, the polarimetry derived from Mini-RF and the earth-based data should be very similar. However, we have discovered that there is a considerable difference in circular polarization ratio (CPR) values between the two data sets. We investigate possible causes for this discrepancy, including cross-talk between channels, sampling, and the ellipticity of the Mini-RF transmit wave. We find that none of these can reproduce the observed CPR differences, though a nonlinear block adaptive quantization function used to compress the data will significantly distort some other polarimetry products. A comparison between earth-based data sets acquired using two different sampling modes (sampling received linear polarizations and sampling circular polarizations) suggests that the CPR differences may be partially due to sampling the data in a different receive polarimetry bases.

Lunar Reconnaissance Orbiter (LRO) Diviner Radiometer, Mini-RF, and LRO Camera data were used to identify and characterize rocky lunar deposits that appear well separated from any potential source crater. Two regions are described: 1) A ∼18,000 km 2 area with elevated rock abundance and extensive melt ponds and veneers near the antipode of Tycho crater (167.5°E, 42.5°N). This region has been identified previously, using radar and imaging data. 2) A much larger and more diffuse region, covering ∼730,000 km 2 , centered near 310°E, 35°S, containing elevated rock abundance and numerous granular flow deposits on crater walls. The rock distributions in both regions favor certain slope azimuths over others, indicating a directional component to the formation of these deposits. The spatial distribution of rocks is consistent with the arrival of ejecta from the west and northwest at low angles (∼10–30°) above the horizon in both regions. The derived age and slope orientations of the deposits indicate that the deposits likely originated as ejecta from the Tycho impact event. Despite their similar origin, the deposits in the two regions show significant differences in the datasets. The Tycho crater antipode deposit covers a smaller area, but the deposits are pervasive and appear to be dominated by impact melts. By contrast, the nearside deposits cover a much larger area and numerous granular flows were triggered. However, the features in this region are less prominent with no evidence for the presence of impact melts. The two regions appear to be surface expressions of a distant impact event that can modify surfaces across wide regions, resulting in a variety of surface morphologies. The Tycho impact event may only be the most recent manifestation of these processes, which likely have played a role in the development of the regolith throughout lunar history.

The Miniature Radio Frequency (Mini-RF) instrument aboard NASA's Lunar Reconnaissance Orbiter (LRO) is a hybrid dual-polarized synthetic aperture radar (SAR) that operated in concert with the Arecibo Observatory to collect bistatic radar data of the lunar nearside from 2012 to 2015. The purpose of this bistatic campaign was to characterize the radar scattering properties of the surface and near-surface, as a function of bistatic angle, for a variety of lunar terrains and search for a coherent backscatter opposition effect indicative of the presence of water ice. A variety of lunar terrain types were sampled over a range of incidence and bistatic angles; including mare, highland, pyroclastic, crater ejecta, and crater floor materials. Responses consistent with an opposition effect were observed for the ejecta of several Copernican-aged craters and the floor of the south-polar crater Cabeus. The responses of ejecta material varied by crater in a manner that suggests a relationship with crater age. The response for Cabeus was observed within the portion of its floor that is not in permanent shadow. The character of the response differs from that of crater ejecta and appears unique with respect to all other lunar terrains observed. Analysis of data for this region suggests that the unique nature of the response may indicate the presence of near-surface deposits of water ice.

Lunar impact melt deposits have unique physical properties. They have among the highest observed radar returns at S-Band (12.6 cm wavelength), implying that they are rough at the decimeter scale. However, they are also observed in high-resolution optical imagery to be quite smooth at the meter scale. These characteristics distinguish them from well-studied terrestrial analogues, such as Hawaiian pāhoehoe and ʻaʻā lava flows. The morphology of impact melt deposits can be related to their emplacement conditions, so understanding the origin of these unique surface properties will help to inform us as to the circumstances under which they were formed. In this work, we seek to find a terrestrial analogue for well-preserved lunar impact melt flows by examining fresh lava flows on Earth. We compare the radar return and high-resolution topographic variations of impact melt flows to terrestrial lava flows with a range of surface textures. The lava flows examined in this work range from smooth Hawaiian pāhoehoe to transitional basaltic flows at Craters of the Moon (COTM) National Monument and Preserve in Idaho to rubbly and spiny pāhoehoe-like flows at the recent eruption at Holuhraun in Iceland. The physical properties of lunar impact melt flows appear to differ from those of all the terrestrial lava flows studied in this work. This may be due to (a) differences in post-emplacement modification processes or (b) fundamental differences in the surface texture of the melt flows due to the melts’ unique emplacement and/or cooling environment. Information about the surface properties of lunar impact melt deposits will be critical for future landed missions that wish to sample these materials.

We measured the length of the Venus sidereal day (LOD) from Earth-based radar observations collected from 1988 to 2017, using offsets in surface feature longitudes from a prediction based on a 243.0185d period derived from analysis of Magellan mission images over a 487-day interval. We derive a mean LOD over 29 years of 243.0212 ± 0.0006d. Our result is consistent with earlier estimates (but with smaller uncertainties), including those based on offsets between Venus Express infrared mapping data and Magellan topography that suggest a mean LOD of 243.0228 ± 0.002d over a 16-year interval. We cannot detect subtle, short-term oscillations in rate, but the derived value provides an excellent fit to observational data over a 29-year period that can be used for future landing-site planning.

The Space Exploration Synthetic Aperture Radar is a new radar instrument development for planetary applications that will enable unprecedented surface and near-subsurface measurements of planetary bodies including the Moon, Mars, and asteroids. The radar is based on an advanced multiple-input multiple-output (MIMO) architecture that operates in the P-band (70 cm wavelength), measures full polarimetry at meter scale resolution, and achieves beam agility through programmable digital beamforming. The radar is based on a low power, lightweight, modular design approach specifically developed to meet stringent launch and operation requirements of planetary instruments. Prototype SESAR subsystems have been developed and tested, and a recent MATISSE (Maturation of Instruments for Solar System Exploration) proposal was awarded to build and test a functional radar panel.

We investigate the physical properties, and changes through time, of lunar impact ejecta using radar and thermal infrared data. We use data from two instruments on the Lunar Reconnaissance Orbiter (LRO) - the Diviner thermal radiometer and the Miniature Radio Frequency (Mini-RF) radar instrument - together with Earth-based radar observations. We use this multiwavelength intercomparison to constrain block sizes and to distinguish surface from buried rocks in proximal ejecta deposits. We find that radar-detectable rocks buried within the upper meter of regolith can remain undisturbed by surface processes such as micrometeorite bombardment for greater than 3 Gyr. We also investigate the thermophysical properties of radar-dark haloes, comprised of fine-grained, rock-poor ejecta distal to the blocky proximal ejecta. Using Diviner data, we confirm that the halo material is depleted in surface rocks, but show that it is otherwise thermophysically indistinct from background regolith. We also find that radar-dark haloes, like the blocky ejecta, remain visible in radar observations for craters with ages greater than 3 Ga, indicating that regolith overturn processes cannot replenish their block populations on that timescale.

SESAR (Space Exploration Synthetic Aperture Radar) is a next generation P-band beamforming radar instrument concept that will enable a new class of observations suitable to meet Decadal Survey science goals for planetary exploration. The radar operates at full polarimetry and fine (meter scale) resolution, and achieves beam agility through programmable transmit waveforms and digital beamforming on receive. The radar is based on a low power, lightweight design approach conceived to meet the stringent planetary instrument requirements. This instrument concept has the potential to provide unprecedented surface and near-subsurface measurements of planetary bodies including the Moon, Mars, and asteroids.

The Space Exploration Synthetic Aperture Radar (SESAR) is an advanced P-band beamforming radar instrument concept to enable a new class of observations suitable to meet multiple Decadal Survey science goals for planetary exploration. The radar is capable of providing unprecedented surface and near-subsurface measurements at full polarimetry and fine (meter scale) resolution, and achieves beam agility through programmable waveform generation and digital beamforming. The radar's highly flexible modular architecture employs a novel low power, lightweight design approach to meet stringent planetary instrument requirements, all while minimizing cost and development time.

We use orbital SHAllow RADar (SHARAD) sounder data to three-dimensionally visualize the subsurface structure of Elysium Planitia, the youngest volcanic province on Mars. Our results reveal an emplacement history consisting of multiple groups of overlapping lava flow units, originating from different sources. The uniquely complex “radar stratigraphy” of Elysium Planitia, relative to other volcanic regions, requires a distinct mechanism to generate the numerous reflectors observed in SHARAD data. Sedimentary deposits interbedded with successive batches of lava flows could account for the elaborate pattern of reflectors. We infer that widespread, rapidly emplaced material sourced from the enigmatic Medusae Fossae Formation (MFF) creates these sedimentary layers. This implies that episodes of atmospheric activity, perhaps linked with the obliquity of Mars, periodically erode and redeposit material from the MFF across a large region.

We combine Earth-based radar maps of Venus from the 1988 and 2012 inferior conjunctions, which had similar viewing geometries. Processing of both datasets with better image focusing and co-registration techniques, and summing over multiple looks, yields maps with 1–2 km spatial resolution and improved signal to noise ratio, especially in the weaker same-sense circular (SC) polarization. The SC maps are unique to Earth-based observations, and offer a different view of surface properties from orbital mapping using same-sense linear (HH or VV) polarization. Highland or tessera terrains on Venus, which may retain a record of crustal differentiation and processes occurring prior to the loss of water, are of great interest for future spacecraft landings. The Earth-based radar images reveal multiple examples of tessera mantling by impact “parabolas” or “haloes”, and can extend mapping of locally thick material from Magellan data by revealing thinner deposits over much larger areas. Of particular interest is an ejecta deposit from Stuart crater that we infer to mantle much of eastern Alpha Regio. Some radar-dark tessera occurrences may indicate sediments that are trapped for longer periods than in the plains. We suggest that such radar information is important for interpretation of orbital infrared data and selection of future tessera landing sites.

The Space Exploration Synthetic Aperture Radar (SESAR) is an advanced P-band beamforming radar instrument concept to enable a new class of observations suitable to meet Decadal Survey science goals for planetary exploration. The radar operates at full polarimetry and fine (meter scale) resolution, and achieves beam agility through programmable waveform generation and digital beamforming. The radar architecture employs a novel low power, lightweight design approach to meet stringent planetary instrument requirements. This instrument concept has the potential to provide unprecedented surface and near-subsurface measurements applicable to multiple Decadal Survey Science Goals.

Cassini's radiometer measurements identify Enceladus's surface cracks as subsurface hot spots.

Venus should be the most Earth-like of all our planetary neighbours: its size, bulk composition and distance from the Sun are very similar to those of Earth. How and why did it all go wrong for Venus? What lessons can be learned about the life story of terrestrial planets in general, in this era of discovery of Earth-like exoplanets? Were the radically different evolutionary paths of Earth and Venus driven solely by distance from the Sun, or do internal dynamics, geological activity, volcanic outgassing and weathering also play an important part? EnVision is a proposed ESA Medium class mission designed to take Earth Observation technology to Venus to measure its current rate of geological activity, determine its geological history, and the origin and maintenance of its hostile atmosphere, to understand how Venus and Earth could have evolved so differently. EnVision will carry three instruments: the Venus Emission Mapper (VEM); the Subsurface Radar Sounder (SRS); and VenSAR, a world-leading European phased array synthetic aperture radar that is the subject of this article. VenSAR will obtain images at a range of spatial resolutions from 30 m regional coverage to 1 m images of selected areas; an improvement of two orders of magnitude on Magellan images; measure topography at 15 m resolution vertical and 60 m spatially from stereo and InSAR data; detect cm-scale change through differential InSAR, to characterise volcanic and tectonic activity, and estimate rates of weathering and surface alteration; and characterise of surface mechanical properties and weathering through multi-polar radar data. These data will be directly comparable with Earth Observation radar data, giving geoscientists unique access to an Earth-sized planet that has evolved on a radically different path to our own, offering new insights on the Earth-sized exoplanets across the galaxy.

Radar provides a unique means to analyze the surface and subsurface physical properties of geologic deposits, including their wavelength-scale roughness, the relative depth of the deposits, and some limited compositional information. The NASA Lunar Reconnaissance Orbiter's (LRO) Miniature Radio Frequency (Mini-RF) instrument has enabled these analyses on the Moon at a global scale. Mini-RF has accumulated 67% coverage of the lunar surface in S-band (12.6 cm) radar with a resolution of 30 m/pixel. Here we present new Mini-RF global orthorectified uncontrolled S-band maps of the Moon and use them for analysis of lunar surface physical properties. Reported here are readily apparent global- and regional-scale differences in lunar surface physical properties that suggest three distinct terranes, namely: a (1) Nearside Radar Dark Region; (2) Orientale basin and continuous ejecta; and the (3) Highlands Radar Bright Region. Integrating these observations with new data from LRO's Diviner Radiometer rock abundance maps, as well Clementine and Lunar Prospector derived compositional values show multiple distinct lunar surface terranes and sub-terranes based upon both physical and compositional surface properties. Previous geochemical investigations of the Moon suggested its crust is best divided into three to four basic crustal provinces or terranes (Feldspathic Highlands Terrane (-An and -Outer), Procellarum KREEP Terrane, and South Pole Aitken Terrane) that are distinct from one another. However, integration of these geochemical data sets with new geophysical data sets allows us to refine these terranes. The result shows a more complex view of these same crustal provinces and provides valuable scientific and hazard perspectives for future targeted human and robotic exploration.

The Tharsis region of Mars is covered in volcanic flows that can stretch for tens to hundreds of kilometers. Radar measurements of the dielectric properties of these flows can provide information regarding their composition and density. SHARAD (shallow radar), a sounding radar on the Mars Reconnaissance Orbiter, detects basal interfaces beneath flows in some areas of Tharsis northwest and west of Ascraeus Mons, with additional detections south of Pavonis Mons. Comparisons with 12.6 cm ground-based radar images suggest that SHARAD detects basal interfaces primarily in dust or regolith-mantled regions. We use SHARAD data to estimate the real relative permittivity of the flows by comparing the measured time delay of returns from the subsurface with altimetry measurements of the flow heights relative to the surrounding plains. In cases where the subsurface interface is visible at different depths, spanning tens of meters, it is also possible to measure the loss tangent (tan δ) of the material. The permittivity values calculated range from 7.6 to 11.6, with an average of 9.6, while the mean loss tangent values range from 7.8 × 10−3 to 2.9 × 10−2 with an average of 1.0 × 10−2. These permittivity and loss tangent estimates for the flows northwest of Ascraeus Mons, west of Ascraeus Mons, and south of Pavonis Mons are consistent with the lab-measured values for dense, low-titanium basalt.

We present a new empirical constraint on the rate of breakdown of large ejecta blocks on the Moon based on observations from the Lunar Reconnaissance Orbiter (LRO) Diviner thermal radiometer. We find that the rockiness of fresh crater ejecta can be quantified using the Diviner-derived rock abundance data set, and we present a strong inverse correlation between the 95 th percentile value of the ejecta rock abundance (RA 95/5 ) and crater age. For nine craters with published model ages derived from crater counts on their continuous ejecta, RA 95/5 decreases with crater age, as (age [m.y.]) −0.46 . This result implies shorter rock survival times than predicted based on downward extrapolation of 100 m crater size-frequency distributions, and represents a new empirical constraint on the rate of comminution of large rocks not previously analyzed experimentally or through direct observation. In addition, our result provides a new method for dating young lunar craters.

In this study, we analyzed the distribution and properties of 146 craters with impact melt deposits exterior to their rims. Many of these craters were only recently discovered due to their unusual radar properties in the near-global Mini-RF data set. We find that most craters with exterior deposits of impact melt are small, less than 20 kilometers, and that the smallest craters have the longest melt flows relative to their size. In addition, exterior deposits of impact melt are more common in the highlands than the mare. This may be the result of differing target properties in the highlands and mare, the difference in titanium content, or the greater variation of topography in the highlands. We find that 80 percent of complex craters and 60 percent of simple craters have melt directions that are coincident or nearly coincident with the lowest point in their rim, implying that pre-existing topography plays a dominant role in melt emplacement. This is likely due to movement during crater modification (complex craters) or breached crater rims (simple craters). We also find that impact melt flows have very high circular polarization ratios compared to other features on the Moon. This suggests that their surfaces are some of the roughest material on the Moon at the centimeter to decimeter scale, even though they appear smooth at the meter scale.

[1] Ground penetrating radar (GPR) has been a useful geophysical tool in investigating a variety of shallow subsurface geological environments on Earth. Here we investigate the capabilities of GPR to provide useful geologic information in one of the most common geologic settings of planetary surfaces, impact crater ejecta. Three types of ejecta are surveyed with GPR at two wavelengths (400 MHz, 200 MHz) at Meteor Crater, Arizona, with the goal of capturing the GPR signature of the subsurface rock population. In order to “ground truth” the GPR characterization, subsurface rocks are visually counted and measured in preexisting subsurface exposures immediately adjacent to and below the GPR transect. The rock size-frequency distribution from 10 to 50 cm based on visual counts is well described by both power law and exponential functions, the former slightly better, reflecting the control of fragmentation processes during the impact-ejection event. GPR counts are found to overestimate the number of subsurface rocks in the upper meter (by a factor of 2–3x) and underestimate in the second meter of depth (0.6–1.0x), results attributable to the highly scattering nature of blocky ejecta. Overturned ejecta that is fractured yet in which fragments are minimally displaced from their complement fragments produces fewer GPR returns than well-mixed ejecta. The use of two wavelengths and division of results into multiple depth zones provides multiple aspects by which to characterize the ejecta block population. Remote GPR measurement of subsurface ejecta in future planetary situations with no subsurface exposure can be used to characterize those rock populations relative to that of Meteor Crater.

[1] We present a technique for estimating Mars topographic roughness on horizontal scales from about 10 m to 100 m using Shallow Radar (SHARAD) sounding data. Our results offer a view of surface properties complementary to Mars Orbiter Laser Altimeter (MOLA) pulse-width or baseline roughness maps and can be compared to SHARAD peak-echo properties to infer deviations from the average near-surface density. Latitudinal averaging of SHARAD-derived roughness over Arabia and Noachis Terrae shows good agreement with MOLA-derived roughness and provides clear evidence for latitude-dependent mantling deposits previously inferred from image data. In northwestern Gordii Dorsum, we find that bulk density in at least the upper few meters is significantly lower than in other units of the Medusae Fossae Formation. We observe the same behavior indicative of low near-surface density in wind-eroded crater fill in the southern highlands. Combining surface-properties analysis, subsurface sounding, and high-resolution optical images, we show that the Pavonis Mons fan-shaped deposit differs significantly from lobate debris aprons which SHARAD has shown to be ice-cored. There are no internal radar reflections from the smooth-facies portion of the Pavonis Mons fan-shaped deposit, and we suggest that these deposits are either quite thin or have little dielectric (i.e., density) contrast with the underlying terrain. Future application of these techniques can identify other low-density units across Mars, assist in the mapping of regional volatile-rich mantling units, and provide new constraints on the physical properties of the polar layered terrain.

SHARAD is a frequency-modulated (15-25 MHz) radar sounder that probes the upper few kilometers of the Martian crust and polar layered deposits. At solar zenith angles less than about 100°, the ionosphere of Mars can induce phase distortion in surface and subsurface radar echoes that substantially degrades the signal-to-noise ratio and vertical resolution of the range-compressed data. We present a range-compression autofocus approach that estimates the phase distortion of SHARAD data along ground-track segments of about 100 km, using a power-law image-sharpness metric and an empirically derived scaling between the phase correction and radar frequency. This method is rapid, yields a greatly improved subsurface image, and provides a means to track regional and temporal changes in the Martian ionosphere.

We have observed Titan with the Arecibo Observatory’s 12.6 cm wavelength radar system during the last eight oppositions of the Saturn system with sufficient sensitivity to characterize its scattering properties as a function of sub-Earth longitude. In a few sessions the Green Bank Telescope was used as the receiving instrument in a bistatic configuration to boost sub-radar track length and integration time. Radar echo spectra have been obtained for a total of 92 viewing geometries with sub-Earth locations scattered through all longitudes and at latitudes between 7.6°S and 26.3°S, close to the maximum southern excursion of the sub-Earth track. We find Titan to have globally average radar albedos at this wavelength of 0.161 in the opposite circular polarization sense as that transmitted (OC) and 0.074 in the same sense (SC), giving a polarization ratio SC/OC of 0.46. These values are intermediate between lower reflectivity rocky surfaces and higher reflectivity clean icy surfaces. The variations with longitude in general mirror the surface brightness variations seen through the infrared atmospheric windows. Xanadu Regio’s radar reflectivity and polarization ratio are higher than the global averages, and suggest that its composition is relatively cleaner water ice or, possibly, some other material with low propagation loss at radio wavelengths. For all echo spectra most of the power is in a broad diffuse component but with a specular component whose strength and narrowness is highly variable as a function of surface location. For all data we fit a sum of the standard Hagfors scattering law describing the specular component and an empirical diffuse radar scattering model to extract bulk parameters of the surface. Many areas exhibit very narrow specular reflections implying terrain that are quite flat on centimeter to meter scales over spans of tens to perhaps hundreds of kilometers. The proportion of spectra showing these narrow specular echoes has fallen significantly over the observational time span, indicating either a latitudinal effect related to terrain differences or changing surface conditions over the past several years. A few radar tracks, especially those from the 2008 session, overlap some high resolution Cassini RADAR imagery swaths to allow a direct comparison with terrain.

We report here on a survey of distal fine-grained ejecta deposits on the Moon, Mars, and Venus. On all three planets, fine-grained ejecta form circular haloes that extend beyond the continuous ejecta and other types of distal deposits such as run-out lobes or ramparts. Using Earth-based radar images, we find that lunar fine-grained ejecta haloes represent meters-thick deposits with abrupt margins, and are depleted in rocks ⩾1 cm in diameter. Martian haloes show low nighttime thermal IR temperatures and thermal inertia, indicating the presence of fine particles estimated to range from ∼10 μm to 10 mm. Using the large sample sizes afforded by global datasets for Venus and Mars, and a complete nearside radar map for the Moon, we establish statistically robust scaling relationships between crater radius R and fine-grained ejecta run-out r * for all three planets. On the Moon, r * ∼ R −0.18 for craters 5–640 km in diameter. For Venus, radar-dark haloes are larger than those on the Moon, but scale as r * ∼ R −0.49 , consistent with ejecta entrainment in Venus’ dense atmosphere. On Mars, fine-ejecta haloes are larger than lunar haloes for a given crater size, indicating entrainment of ejecta by the atmosphere or vaporized subsurface volatiles, but scale as R −0.13 , similar to the ballistic lunar scaling. Ejecta suspension in vortices generated by passage of the ejecta curtain is predicted to result in ejecta run-out that scales with crater size as R 1/2 , and the wind speeds so generated may be insufficient to transport particles at the larger end of the calculated range. The observed scaling and morphology of the low-temperature haloes leads us rather to favor winds generated by early-stage vapor plume expansion as the emplacement mechanism for low-temperature halo materials.