Search

Photoinduced halide segregation hinders widespread application of three-dimensional (3D) mixed-halide perovskites. Much less is known about this phenomenon in lower-dimensional systems. Here, we study photoinduced halide segregation in lower-dimensional mixed iodide-bromide perovskites (PEA2MAn-1Pbn(BrxI1-x)3n+1, with PEA+: phenethylammonium and MA+: methylammonium) through time-dependent photoluminescence (PL) spectroscopy. We show that layered two-dimensional (2D) structures render additional stability against the demixing of halide phases under illumination. We ascribe this behavior to reduced halide mobility due to the intrinsic heterogeneity of 2D mixed-halide perovskites, which we demonstrate via 207Pb solid-state NMR. However, the dimensionality of the 2D phase is critical in regulating photostability. By tracking the PL of multidimensional perovskite films under illumination, we find that while halide segregation is largely inhibited in 2D perovskites (n = 1), it is not suppressed in quasi-2D phases (n = 2), which display a behavior intermediate between 2D and 3D and a peculiar absence of halide redistribution in the dark that is only induced at higher temperature for the quasi-2D phase.

It has recently been demonstrated that the addition of zinc can enhance the mechanical strength of tricalcium silicates (C3S) upon hydration, but the structure of the main hydration product of cement, calcium silicate hydrate (C-S-H), in zinc modified formulations remains unresolved. Here, we combine 29Si DNP-enhanced solid-state nuclear magnetic resonance (NMR), density functional theory (DFT)-based chemical shift computations, and molecular dynamics (MD) modeling to determine the atomic-level structure of zinc-modified C-S-H. The structure contains two main new silicon species (Q(1,Zn) and Q(2p,Zn)) where zinc substitutes Q(1) silicon species in dimers and bridging Q(2b) silicon sites, respectively. Structures determined as a function of zinc content show that zinc promotes an increase in the dreierketten mean chain lengths., Journal of the American Chemical Society, 144 (50), ISSN:0002-7863, ISSN:1520-5126

Low sensitivity is the primary limitation to extending nuclear magnetic resonance (NMR) techniques to more advanced chemical and structural studies. Photochemically induced dynamic nuclear polarization (photo-CIDNP) is an NMR hyperpolarization technique where light is used to excite a suitable donor–acceptor system, creating a spin-correlated radical pair whose evolution drives nuclear hy-perpolarization. Systems that exhibit photo-CIDNP in solids are not common and this effect has, up to now, only been observed for 13C and 15N nuclei. However, the low gyromagnetic ratio and natural abundance of these nuclei trap the local hyperpolarization in the vicinity of the chromophore and limit the utility for bulk hyperpolarization. Here we report the first example of optically enhanced solid-state 1H NMR spectroscopy in the high-field regime. This is achieved via photo-CIDNP of a donor–chromophore–acceptor molecule in a frozen solution at 0.3 T and 85 K, where spontaneous spin diffusion among the abundant strongly coupled 1H nuclei relays polarization through the whole sample, yielding a 16-fold bulk 1H signal enhancement under continuous laser irradiation at 450 nm. These findings enable a new strategy for hyperpolarized NMR beyond the current limits of conventional microwave-driven DNP.

Nuclear magnetic resonance suffers from an intrinsically low sensitivity, which can be overcome by dynamic nuclear polarization (DNP). Gd(III) complexes are attractive exogenous polarizing agents for magic angle spinning (MAS) DNP due to their high chemical stability in contrast to nitroxide-based radicals. However, even the state-of-the-art Gd(III) complexes have so far provided relatively low DNP signal enhancements of ca. 36 in comparison to standard DNP biradicals, which show enhancements of over 200. Here, we report a series of new Gd(III) complexes for DNP and show that the observed DNP enhancements of the new and existing Gd(III) complexes are inversely proportional to the square of the zero-field splitting (ZFS) parameter D, which is in turn determined by the ligand-type and the local coordination environment. The experimental DNP enhancements at 9.4 T and the ZFS parameters measured with pulsed electron paramagnetic resonance (EPR) spectroscopy agree with the above model, paving the way for the development of more efficient Gd(III) polarizing agents., The Journal of Physical Chemistry C, 126 (27), ISSN:1932-7455, ISSN:1932-7447

Determination of the three-dimensional atomic-level structure of powdered solids is one of the key goals in current chemistry. Solid-state NMR chemical shifts can be used to solve this problem, but they are limited by the high computational cost associated with crystal structure prediction methods and density functional theory chemical shift calculations. Here, we successfully determine the crystal structures of ampicillin, piroxicam, cocaine, and two polymorphs of the drug molecule AZD8329 using on-the-fly generated machine-learned isotropic chemical shifts to directly guide a Monte Carlo-based structure determination process starting from a random gas-phase conformation., Journal of the American Chemical Society, 144 (16), ISSN:0002-7863, ISSN:1520-5126

CsPbI3 is a promising material for optoelectronics owing to its thermal robustness and favorable bandgap. However, its fabrication is challenging because its photoactive phase is thermodynamically unstable at room temperature. Adding dimethylammonium (DMA) alleviates this instability and is currently understood to result in the formation of DMA(x)Cs(1-x)PbI(3) perovskite solid solutions. Here, we use NMR of the Cs-133 and C-13 local structural probes to show that these solid solutions are not thermodynamically stable, and their synthesis under thermodynamic control leads to a segregated mixture of yellow one-dimensional DMAPbI(3) phase and delta-CsPbI3. We show that mixed-cation DMA(x)Cs(1-x)PbI(3) perovskite phases only form when they are kinetically trapped by rapid antisolvent-induced crystallization. We explore the energetics of DMA incorporation into CsPbI3 using first-principles calculations and molecular dynamics simulations and find that this process is energetically unfavorable. Our results provide a complete atomic-level picture of the mechanism of DMA-induced stabilization of the black perovskite phase of CsPbI3 and shed new light on this deceptively simple material.

Surface and bulk molecular modulators are the key to improving the efficiency and stability of hybrid perovskite solar cells. However, due to their low concentration, heterogeneous environments, and low sample mass, it remains challenging to characterize their structure and dynamics at the atomic level, as required to establish structure-activity relationships. Nuclear magnetic resonance (NMR) spectroscopy has revealed a wealth of information on the atomic-level structure of hybrid perovskites, but the inherent insensitivity of NMR severely limits its utility to characterize thin-film samples. Dynamic nuclear polarization (DNP) can enhance NMR sensitivity by orders of magnitude, but DNP methods for perovskite materials have so far been limited. Here, we determined the factors that limit the efficiency of DNP NMR for perovskite samples by systematically studying layered hybrid perovskite analogues. We find that the fast-relaxing dynamic cation is the major impediment to higher DNP efficiency, while microwave absorption and particle morphology play a secondary role. We then show that the former can be mitigated by deuteration, enabling 1H DNP enhancement factors of up to 100, which can be harnessed to enhance signals from dopants or additives present in very low concentrations. Specifically, using this new DNP methodology at a high magnetic field and with small sample volumes, we have recorded the NMR spectrum of the 20 nm (6 mu g) passivating layer on a single perovskite thin film, revealing a two-dimensional (2D) layered perovskite structure at the surface that resembles the n = 1 homologue but which has greater disorder than in bulk layered perovskites.

Understanding defects is of paramount importance for the development of stable halide perovskite solar cells (PSCs). However, isolating their distinctive effects on device efficiency and stability is currently a challenge. We report that adding the organic molecule 3-phosphonopropionic acid (H3pp) to the halide perovskite results in unchanged overall optoelectronic performance while having a tremendous effect on device stability. We obtained PSCs with ∼21% efficiency that retain ∼100% of the initial efficiency after 1,000 h at the maximum power point under simulated AM1.5G illumination. The strong interaction between the perovskite and the H3pp molecule through two types of hydrogen bonds (HI and OH) leads to shallow point defect passivation that has a significant effect on device stability but not on the non-radiative recombination and device efficiency. We expect that our work will have important implications for the current understanding and advancement of operational PSCs., We thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under grant no. SEV-2017-0706 for the postdoctoral contract to H.X. We thank the King Abdulaziz City for Science and Technology (KACST) for the financial support to M.G. and S.M.Z. A.H. is thankful for the financial support from the European Union H2020, ESPResSo project grant agreement 764047, and Swiss National Science Foundation project IZLCZ2_170177. Z.W. and S.F. are thankful for the “China Scholarship Council” fellowship (CSC). H.-S.K., M.G., and S.M.Z. are thankful for the financial support from the GRAPHENE Flagship Core 2 project supported by the European Commission H2020 Programme under contract 785219. P.T. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ANAPHASE (ENE2017-85087-C3). D.J.K. and L.E. acknowledge support from the Swiss National Science Foundation grant no. 200021_160112. S.T. acknowledges funding from the Computational Sciences for Energy Research tenure track programme of Shell, NWO, and FOM (project no. 15CST04-2), the Netherlands. S.D.S. and M.A. acknowledge funding from the Marie Skłodowska-Curie actions (grant agreement no. 841386) under the European Union’s Horizon 2020 research and innovation programme. S.D.S acknowledges support from the Royal Society and Tata Group (UF150033) and EPSRC (EP/R023980/1). X.S. and F.F. acknowledge the funding from the Swiss Federal Office of Energy (SFOE)-BFE (project no. SI/501805-01). K.G. appreciates support from the Polish Ministry of Science and Higher Education within the Mobilnosc Plus program (grant no. 1603/MOB/V/2017/0). K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 804349 (ERC StG Cuhl) and RyC fellowship no. RYC-2017-22330. We give thanks to the Spanish State Research Agency for the grant Self-Power (PID2019-104272RB-C54 / AEI / 10.13039/501100011033) and the OrgEnergy Excelence Network (CTQ2016-81911-REDT), and to the Agència de Gestiód'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa d’R+D+I Energy for Society (XRE4S). Part of this work is under Materials Science Ph.D. Degree for A.M. and P.T. and the Chemistry Ph.D. programme for C.P. of the Universitat Autonoma de Barcelona (UAB, Spain). We thank CONACYT for the scholarship to C.P. We acknowledge Libertad Sole and also the Clean-Room from IMB-CNM for FIB process. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya.

Metal halide perovskites of the general formula ABX3—where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion—have shown great potential as light harvesters for thin-film photovoltaics1–5. Among a large number of compositions investigated, the cubic α-phase of formamidinium lead triiodide (FAPbI3) has emerged as the most promising semiconductor for highly efficient and stable perovskite solar cells6–9, and maximizing the performance of this material in such devices is of vital importance for the perovskite research community. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO−) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. The resulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance. Incorporation of the pseudo-halide anion formate during the fabrication of α-FAPbI3 perovskite films eliminates deleterious iodide vacancies, yielding solar cell devices with a certified power conversion efficiency of 25.21 per cent and long-term operational stability.

Layered hybrid halide perovskites are known to be more environmentally stable than their 3D analogues. The enhanced stability is particularly relevant for Dion–Jacobson-type layered perovskites due...

In the raser effect, a sample spontaneously emits continuous radiofrequency radiation, allowing exceptionally narrow NMR line widths to be recorded without applying pulses. To achieve this phenomenon, a large negative magnetization must be induced, which we show here can be achieved for the 17O magnetization of isotopically labeled Gd-doped CeO2 using solid effect dynamic nuclear polarization (DNP), at high field and 110 K. This allows a 2 mHz line width to be measured, which is limited only by the magnetic field stability. The raser effect can be reversibly activated and deactivated by magic angle spinning (MAS), which modulates the nuclear spin coherence lifetime. The use of MAS DNP to enable the raser effect should be further applicable to other systems and nuclei.

International audience; Copper/zinc superoxide dismutase (SOD) is a homodimeric metalloenzyme which has been extensively studied as a benchmark for structure-function relationships in proteins, in particular because of its implication in the familial form of the neurodegenerative disease amyotrophic lateral sclerosis. Here, we investigate microcrystalline preparations of two differently metallated forms of SOD, namely the fully mature functional Cu I ,Zn state and the E,Zn-SOD state in which the Cu site is empty. By using solid-state NMR with fast magic-angle spinning (MAS) at high magnetic fields (1 H Larmor frequency of 800-1000 MHz), we quantify motions spanning a dynamic range from ns to ms. We determine that metal ion uptake does not act as a rigidification element but as a switch redistributing motional processes on different timescales, with coupling of the dynamics of histidine sidechains and those of remote key backbone elements of the protein.

CsPbI

Summary Interfacial modification is crucial to fully develop the potential of semiconductor devices, including the revolutionary halide perovskite-based optoelectronics, such as photovoltaics, light-emitting diodes, and photodetectors. The all-inorganic halide perovskites, which are potential long-term stable photovoltaic materials, are suffering from poor interfacial contact with metal oxide charge-selective layer, severely limiting the power conversion efficiency and stability of inorganic perovskite solar cells. Here, we propose an intermediate-phase engineering strategy to improve the inorganic perovskite/metal oxide interface by utilizing volatile salts. The introduction of organic cations (such as methylammonium and formamidinium), which can be doped into the perovskite lattice, leads to the formation of an organic-inorganic hybrid perovskite intermediate phase, promoting a robust interfacial contact through hydrogen bonding. A champion CsPb(I0.75Br0.25)3-based device with a power conversion efficiency of 17.0% and an open-circuit voltage of 1.34 V was realized, implying that a record of over 65% of the Shockley-Queisser efficiency limit is achieved.

Nuclear magnetic resonance (NMR) chemical shifts are a direct probe of local atomic environments and can be used to determine the structure of solid materials. However, the substantial computational cost required to predict accurate chemical shifts is a key bottleneck for NMR crystallography. We recently introduced ShiftML, a machine-learning model of chemical shifts in molecular solids, trained on minimum-energy geometries of materials composed of C, H, N, O, and S that provides rapid chemical shift predictions with density functional theory (DFT) accuracy. Here, we extend the capabilities of ShiftML to predict chemical shifts for both finite temperature structures and more chemically diverse compounds, while retaining the same speed and accuracy. For a benchmark set of 13 molecular solids, we find a root-mean-squared error of 0.47 ppm with respect to experiment for 1H shift predictions (compared to 0.35 ppm for explicit DFT calculations), while reducing the computational cost by over four orders of magnitude., The Journal of Physical Chemistry C, 126 (39), ISSN:1932-7455, ISSN:1932-7447

Description, Machine-learned chemical shifts enable probabilistic assignment in organic solids without knowledge of the structure., A prerequisite for NMR studies of organic materials is assigning each experimental chemical shift to a set of geometrically equivalent nuclei. Obtaining the assignment experimentally can be challenging and typically requires time-consuming multidimensional correlation experiments. An alternative solution for determining the assignment involves statistical analysis of experimental chemical shift databases, but no such database exists for molecular solids. Here, by combining the Cambridge Structural Database with a machine learning model of chemical shifts, we construct a statistical basis for probabilistic chemical shift assignment of organic crystals by calculating shifts for more than 200,000 compounds, enabling the probabilistic assignment of organic crystals directly from their two-dimensional chemical structure. The approach is demonstrated with the 13C and 1H assignment of 11 molecular solids with experimental shifts and benchmarked on 100 crystals using predicted shifts. The correct assignment was found among the two most probable assignments in more than 80% of cases.

Nuclear spin hyperpolarization provides a promising route to overcome the challenges imposed by the limited sensitivity of nuclear magnetic resonance. Here we demonstrate that dissolution of spin-polarized pentacene-doped naphthalene crystals enables transfer of polarization to target molecules via intermolecular cross relaxation at room temperature and moderate magnetic fields (1.45$\,$T). This makes it possible to exploit the high spin polarization of optically polarized crystals while mitigating the challenges of its transfer to external nuclei, particularly of the large distances and prohibitively weak coupling between source and target nuclei across solid-solid or solid-liquid interfaces. With this method, here we inject the highly polarized mixture into a benchtop NMR spectrometer and observe the polarization dynamics for target $^1$H nuclei. Although the spectra are radiation damped due to the high naphthalene magnetization, we describe a procedure to process the data in order to obtain more conventional NMR spectra, and extract the target nuclei polarization. With the entire process occurring on a timescale of one minute, we observe NMR signals enhanced by factors between -200 and -1730 at 1.45$\,$T for a range of small molecules., 8 pages, 4 figures

Resolution in proton solid state magic angle sample spinning (MAS) NMR is limited by the intrinsically imperfect nature of coherent averaging induced by either MAS or multiple pulse sequence methods. Here, we suggest that instead of optimizing and perfecting a coherent averaging scheme, we could approach the problem by parametrically mapping the error terms due to imperfect averaging in a k-space representation, in such a way that they can be removed in a multidimensional correlation leaving only the desired pure isotropic signal. We illustrate the approach here by determining pure isotropic H-1 spectra from a series of MAS spectra acquired at different spinning rates. For six different organic solids, the approach is shown to produce pure isotropic H-1 spectra that are significantly narrower than the MAS spectrum acquired at the fastest possible rate, with linewidths down to as little as 48 Hz. On average, we observe a 7-fold increase in resolution, and up to a factor of 20, as compared with spectra acquired at 100 kHz MAS. The approach is directly applicable to a range of solids, and we anticipate that the same underlying principle for removing errors introduced here can be applied to other problems in NMR spectroscopy.

Chemical doping of inorganic-organic hybrid perovskites is an effective way of improving the performance and operational stability of perovskite solar cells (PSCs). Here we use 5-ammonium valeric acid iodide (AVAI) to chemically stabilize the structure of α-FAPbI3. Using solid-state MAS NMR, we demonstrate the atomic-level interaction between the molecular modulator and the perovskite lattice and propose a structural model of the stabilized three-dimensional structure, further aided by density functional theory (DFT) calculations. We find that one-step deposition of the perovskite in the presence of AVAI produces highly crystalline films with large, micrometer-sized grains and enhanced charge-carrier lifetimes, as probed by transient absorption spectroscopy. As a result, we achieve greatly enhanced solar cell performance for the optimized AVA-based devices with a maximum power conversion efficiency (PCE) of 18.94%. The devices retain 90% of the initial efficiency after 300 h under continuous white light illumination and maximum-power point-tracking measurement.

The study of hydration and crystallization processes involving inorganic oxides is often complicated by poor long-range order and the formation of heterogeneous domains or surface layers. In solid-state NMR, H-1-H-1 spin diffusion analyses can provide information on spatial composition distributions, domain sizes, or miscibility in both ordered and disordered solids. Such analyses have been implemented in organic solids but crucially rely on separate measurements of the 1 H-1 spin diffusion coefficients in closely related systems. We demonstrate that an experimental NMR method, in which "holes" of well-defined dimensions are created in proton magnetization, can be applied to determine spin diffusion coefficients in cementitious solids hydrated with O-17-enriched water. We determine proton spin diffusion coefficients of 240 +/- 40 nm(2)/s for hydrated tricalcium aluminate and 140 +/- 20 nm(2)/s for hydrated tricalcium silicate under quasistatic conditions.

The residual broadening observed in 1H spectra of rigid organic solids at natural abundance under 111 kHz magic angle spinning (MAS) is typically a few hundred Hertz. Here we show that refocusable and non-refocusable interactions contribute roughly equally to this residual at high-fields (21.14 T), and suggest that the removal of the non-refocusable part will produce significant increase in spectral resolution. To this end, we demonstrate an experiment for the indirect acquisition of constant-time experiments at ultra-fast MAS (CT-MAS) which verifies this hypothesis. The combination of this experiment with the two-dimensional one pulse (TOP) transformation reduces the experimental time to a fraction of the original cost while retaining the narrowing effects. Results obtained with TOP-CT-MAS at 111 kHz MAS on a sample of β-AspAla yield up to 30% higher resolution spectra than the equivalent one-pulse experiment, in less than 10 min.

We investigate changes in the local environment of 207Pb sites in the relaxor ferroelectric 0.67PbMg1/3Nb2/3O3–0.33PbTiO3 using variable temperature magic angle spinning nuclear magnetic resonance....

Gadolinium(III) complexes have recently been demonstrated to have potential as polarizing agents for high-field dynamic nuclear polarization (DNP) NMR spectroscopy. By tailoring the ligand design to reduce the zero-field splitting (ZFS), we demonstrate a quadratic improvement in DNP through the investigation of a stable, water-soluble, narrow-line Gd(III) complex, [Gd-(tpatcn)], doubling the magic-angle-spinning DNP enhancement of the previous state-of-the-art [Gd(dota)-(H2O)](-) at 9.4 T and 100 K.