Search

A near-ideal and homogeneous β-Ga2O3 Schottky diode with Co contact for a doping level of ∼4.2 × 1017 cm−3 in the drift layer where the Boltzmann approximation is valid is reported. Unlike Si or GaN, thermionic emission is shown to be the dominant current conduction mechanism in the β-Ga2O3 Schottky diode at this doping level. A wide depletion region appended with a large built-in potential is observed to limit the thermionic field emission current, which is otherwise evident in narrower bandgap semiconductor (such as Si or GaN) Schottky diodes having a similar carrier concentration in the drift region. The results shown in this study can be used to identify the theoretical limits of drift layer doping beyond which the ideality factor and reverse leakage current should start deteriorating in ultra-wide bandgap semiconductor based Schottky diodes. [ABSTRACT FROM AUTHOR]

Over the last decade, beta-phase gallium oxide (β-Ga2O3) has developed an extensive interest for applications such as high-power electronics. Due to its ultrawide bandgap of ∼4.8 eV and predicted breakdown field of ∼8 MV/cm along with its ability to be grown from the melt, this material demonstrates immense promise for high-voltage switching. The pace of development for β-Ga2O3 over these past ten years has been rapid, and ample new information has been generated on metal/β-Ga2O3 interfaces. With the advent of high-quality melt-grown substrates and epitaxial layers, low ideality factors (<1.1) and high Schottky barrier heights (>2.2 eV) have been demonstrated for Schottky contacts. For Ohmic contacts, specific contact resistivities of the common Ti/Au metallization are routinely reported in the 10−5–10−6 Ω cm2 range. This critical and comprehensive review focuses on the fundamental physics of Ohmic and Schottky contacts to bulk and epitaxial β-Ga2O3 in the published literature. It centers on the influence of surface treatments and defects on electrical contacts, Ohmic contacts, and Schottky contacts to β-Ga2O3. Native upward band bending is observed on β-Ga2O3, and the influence of wet and dry etching on band bending along with Schottky barrier height and ideality factor is discussed. Work on Ohmic contacts concentrates on the conventional Ti/Au anneal but additional Ohmic metallizations such as conductive oxides and others are treated as well. Schottky contacts are examined with specific focus on Fermi level pinning, thermal stability of Schottky metallizations, and Schottky barrier inhomogeneity. [ABSTRACT FROM AUTHOR]

Chemical and electrical measurements of Ti/(010) β-Ga2O3 and Ti/(001) β-Ga2O3 interfaces were conducted as a function of annealing temperature using x-ray photoelectron spectroscopy (XPS), current density–voltage (J–V), and capacitance–voltage (C–V) measurements. XPS revealed partial Ti oxidation at both interfaces in the as-deposited condition, with more Ti oxidation on the (001) β-Ga2O3 epilayer surface than the (010) β-Ga2O3 substrate surface. The amount of oxidized Ti increased with annealing temperature. The Schottky barrier heights for as-deposited (unannealed) Au/Ti/(010) β-Ga2O3 and Au/Ti/(001) β-Ga2O3 contacts as determined from J–V and C–V measurements were between 0.64 and 0.83 eV. Shifts in XPS core level peaks for Ti/(010) β-Ga2O3 suggest that the Schottky barrier height decreases with temperature up to 350 °C for 10-min anneals and increases for 10-min anneals ≥460 °C. Taken together, the results suggest a strong dependence of Ti reactivity on the β-Ga2O3 surface, which can affect the electrical performance and stability of Ti/β-Ga2O3 ohmic contacts at elevated temperatures. [ABSTRACT FROM AUTHOR]

The Schottky barriers of Ti, Mo, Co, Ni, Pd, and Au on (100) β-Ga2O3 substrates were analyzed using a combination of current-voltage (J-V), capacitance-voltage (C-V), and current-voltage-temperature (J-V-T) measurements. Near-ideal, average ideality factors for Ti, Mo, Co, and Ni were 1.05–1.15, whereas higher ideality factors (∼1.3) were observed for Pd and Au contacts. Barrier heights ranging from 0.60 to 1.20 eV were calculated from J-V measurements for the metals with low ideality factors. C-V measurements of all Schottky metals were conducted and yielded average barrier heights ranging from 0.78 to 1.98 eV. J-V-T measurements of Ti and Co diodes yielded barrier heights of 0.81 and 1.35 eV, respectively. The results reveal a strong positive correlation between the calculated Schottky barrier heights and the metal work functions: the index of interface behavior, S = 0.70, 0.97, and 0.81 for J-V, C-V, and J-V-T data, respectively. [ABSTRACT FROM AUTHOR]

Heteroepitaxial films of Ga2O3 were grown on c-plane sapphire (0001). The stable phase β-Ga2O3 was grown using the metalorganic chemical vapor deposition technique, regardless of precursor flow rates, at temperatures between 500°C and 850°C. Metastable α- and ε-phases were grownwhen using the halide vapor phase epitaxy (HVPE) technique, at growth temperatures between 650°C and 850°C, both separately and in combination. XTEM revealed the better lattice-matched α-phase growing semi-coherently on the substrate, followed by ε-Ga2O3. The epitaxial relationship was determined to be [1100] ε-Ga2O3 || [1120] α-Ga2O3 || [1120] α-Al2O3. SIMS revealed that epilayers forming the ε-phase contain higher concentrations of Cl introduced during HVPE growth. [ABSTRACT FROM AUTHOR]