Search

Survivin orchestrates intracellular pathways during cell division and apoptosis. Its central function as mitotic regulator and inhibitor of cell death has major implications for tumor cell proliferation. Analyses in early-branching Metazoa so far propose an exclusive role of survivin as a chromosomal passenger protein, whereas only later during evolution a complementary antiapoptotic function might have arisen, concurrent with increased organismal complexity. To lift the veil on the ancestral function(s) of this key regulator, a survivin-like protein (SURVL) of one of the earliest-branching metazoan taxa was identified and functionally characterized. SURVL of the sponge Suberites domuncula shares considerable similarities with its metazoan homologs, ranging from conserved exon/intron structure to presence of protein-interaction domains. Whereas sponge tissue shows a low steady-state level, SURVL expression was significantly upregulated in rapidly proliferating primmorph cells. In addition, challenge of tissue and primmorphs with heavy metal or lipopeptide stimulated SURVL expression, concurrent with the expression of a newly discovered caspase. Complementary functional analyses in transfected HEK-293 cells revealed that heterologous expression of a SURVL-EFGP fusion not only promotes proliferation but also enhances resistance to cadmium-induced cell death. Taken together, these results suggest both a deep evolutionary conserved dual role of survivin and an equally conserved central position in the interconnected pathways of cell cycle and apoptosis. [ABSTRACT FROM AUTHOR]

Surface functionalization is an effective approach to change the surface properties of a material to achieve a specific goal such as improving the biocompatibility of the material. Here, the surface of the commercial biomedical Ti-6Al-7Nb alloy was functionalized through synthesizing of a porous surface layer by liquid metal dealloying (LMD). During LMD, the Ti-6Al-7Nb alloy is immersed in liquid magnesium (Mg) and both materials react with each other. Particularly, aluminum (Al) is selectively dissolved from the Ti-6Al-7Nb alloy into liquid Mg while titanium (Ti) and niobium (Nb) diffuse along the metal/liquid interface to form a porous structure. We demonstrate that the porous surface layer in the Ti-6Al-7Nb alloy can be successfully tailored by LMD. Furthermore, the concentration of harmful Al in this porous layer is reduced by about 48% (from 5.62 ± 0.11 wt.% to 2.95 ± 0.05 wt.%) after 30 min of dealloying at 1150 K. The properties of the porous layer (e.g., layer thickness) can be tuned by varying the dealloying conditions. In-vitro tests suggest improved bone formation on the functionalized porous surface of the Ti-6Al-7Nb alloy.

Magnesium-based biomaterials belong to the third generation of biomaterials that are also bioactive. These smart materials combine bioactivity and biodegradability, and elicit specific cellular responses at the molecular level. In fact, osteoinductive properties have been observed in mesenchymal stem cells in the presence of Magnesium. The mechanistic understanding of the physiological effects however, remains a difficult task as Mg is involved in a multitude of biological reactions. The study of protein interactions may shed light on the molecular processes in Mg-stimulated cells, therefore, suitable data mining tools are required to analyze the large amount data generated via proteomics. Protein compositions over time between two conditions (human mesenchymal stem cells cultured with and without Mg degradation products) were analyzed using Vester's Sensitivity Model. Proteins whose dynamics significantly change from one setup to the other were classified into four categories: passive, active, critical, and buffering according to their regulatory activity. In this work, we demonstrated the use of Vester's Sensitivity Model as an appropriate data mining tool. Protein network analyses highlighted the primary role of Mg-based implant degradation on cell metabolism without deleterious effect on cell viability. Furthermore, key proteins involved in calcium-dependant cellular activities were emphasized leading to further studies.

Implantation is a frequent procedure in orthopedic surgery, particularly in the aging population. However, it possesses the risk of infection and biofilm formation at the surgical site. This can cause unnecessary suffering to patients and burden on the healthcare system. Pure Mg, as a promising metal for biodegradable orthopedic implants, exhibits some antibacterial effects due to the alkaline pH produced during degradation. However, this antibacterial effect may not be sufficient in a dynamic environment, for example, the human body. The aim of this study was to increase the antibacterial properties under harsh and dynamic conditions by alloying silver metal with pure Mg as much as possible. Meanwhile, the Mg-Ag alloys should not show obvious cytotoxicity to human primary osteoblasts. Therefore, we studied the influence of the microstructure and the silver content on the degradation behavior, cytocompatibility, and antibacterial properties of Mg-Ag alloys in vitro. The results indicated that a higher silver content can increase the degradation rate of Mg-Ag alloys. However, the degradation rate could be reduced by eliminating the precipitates in the Mg-Ag alloys via T4 treatment. By controlling the microstructure and increasing the silver content, Mg-Ag alloys obtained good antibacterial properties in harsh and dynamic conditions but had almost equivalent cytocompatibility to human primary osteoblasts as pure Mg.

Magnesium and its alloys gain wide attention as degradable biomaterials. In order to reveal the molecular mechanism of the influence of biodegradable magnesium on cells, proteomics analysis was performed in this work. After mouse fibroblasts (L929) were cultured with or without Mg degradation products (Mg-extract) for 8, 24, and 48h, changes in protein expression profiles were obtained using isobaric tags for relative and absolute quantitation (iTRAQ) coupled two dimensional liquid chromatography-tandem mass spectrometry (2D LC MS/MS). A total of 867 proteins were identified (relying on at least two peptides). Compared to the control group, 205, 282, and 217 regulated proteins were identified at 8, 24, and 48h, respectively. 65 common proteins were up or down- regulated within all the three time points, which were involved in various physiological and metabolic activities. Consistent with viability, proliferation, and cell cycle analysis, stimulated energy metabolism as well as protein synthesis pathways were discussed, indicating a possible effect of Mg-extract on L929 proliferation. Furthermore, endocytosis and focal adhesion processes were also discussed. This proteomics study uncovers early cellular mechanisms triggered by Mg degradation products and highlights the cytocompatibility of biodegradable metallic materials for biomedical applications such as stents or orthopaedic implants., (Copyright © 2016. Published by Elsevier B.V.)

Magnesium alloys have been identified as a new generation material of orthopaedic implants. In vitro setups mimicking physiological conditions are promising for material / degradation analysis prior to in vivo studies however the direct influence of cell on the degradation mechanism has never been investigated. For the first time, the direct, active, influence of human primary osteoblasts on magnesium-based materials (pure magnesium, Mg-2Ag and Mg-10Gd alloys) is studied for up to 14 days. Several parameters such as composition of the degradation interface (directly beneath the cells) are analysed with a scanning electron microscope equipped with energy dispersive X-ray and focused ion beam. Furthermore, influence of the materials on cell metabolism is examined via different parameters like active mineralisation process. The results are highlighting the influences of the selected alloying element on the initial cells metabolic activity.

Increased durability of permanent TiAl6V4 implants still remains a requirement for the patient's well-being. One way to achieve a better bone-material connection is to enable bone "ingrowth" into the implant. Therefore, a new porous TiAl6V4 material was produced via metal injection moulding (MIM). Specimens with four different porosities were produced using gas-atomised spherical TiAl6V4 with different powder particle diameters, namely, "Small" (<45 μm), "Medium" (45-63 μm), "Mix" (90% 125-180 μm + 10% <45 μm), and "Large" (125-180 μm). Tensile tests, compression tests, and resonant ultrasound spectroscopy (RUS) were used to analyse mechanical properties. These tests revealed an increasing Young's modulus with decreasing porosity; that is, "Large" and "Mix" exhibit mechanical properties closer to bone than to bulk material. By applying X-ray tomography (3D volume) and optical metallographic methods (2D volume and dimensions) the pores were dissected. The pore analysis of the "Mix" and "Large" samples showed pore volumes between 29% and 34%, respectively, with pore diameters ranging up to 175 μm and even above 200 μm for "Large." Material cytotoxicity on bone cell lines (SaOs-2 and MG-63) and primary cells (human bone-derived cells, HBDC) was studied by MTT assays and highlighted an increasing viability with higher porosity.

Magnesium-based implants exhibit various advantages such as biodegradability and potential for enhanced in vivo bone formation. However, the cellular mechanisms behind this possible osteoconductivity remain unclear. To determine whether high local magnesium concentrations can be osteoconductive and exclude other environmental factors that occur during the degradation of magnesium implants, magnesium salt (MgCl2) was used as a model system. Because cell lines are preferred targets in studies of non-degradable implant materials, we performed a comparative study of 3 osteosarcoma-derived cell lines (MG63, SaoS2 and U2OS) with primary human osteoblasts. The correlation among cell count, viability, cell size and several MgCl2 concentrations was used to examine the influence of magnesium on proliferation in vitro. Moreover, bone metabolism alterations during proliferation were investigated by analyzing the expression of genes involved in osteogenesis. It was observed that for all cell types, the cell count decreases at concentrations above 10 mM MgCl2. However, detailed analysis showed that MgCl2 has a relevant but very diverse influence on proliferation and bone metabolism, depending on the cell type. Only for primary cells was a clear stimulating effect observed. Therefore, reliable results demonstrating the osteoconductivity of magnesium implants can only be achieved with primary osteoblasts.

Titanium is the most widely preferred metal material for bone reconstruction in orthopedics and dentistry. To improve its biological performance, various coatings can be applied. In this investigation, a biomimetic coating on a model implant surface was studied in X-ray and neutron reflectivity experiments to probe the quality of this coating, which is only few nanometers thick. Titanium was deposited on polished silicon surfaces using a magnetron sputtering technique. To improve the lipid coating's stability, a stronger van der Waals interaction was first created between the implant surface and the biomimetic coating by adding a phosphonic acid (n-octadecylphosphonic acid - OPA) monolayer onto the surfaces. Then, three monolayers of POPE (phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-ethanolamine) were transferred using the Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques. The analysis of X-ray and neutron specular reflectivity data shows that OPA molecules cover the model implant surface completely and that approximately 50% coverage of POPE can be achieved by LB and LS transfer.

Implantation of biomaterials like titanium (Ti) causes inflammatory reactions possibly affecting implant functionality. Surface modifications could improve biocompatibility and functionality of implants. Biomembrane-derived phospholipids might be useful as implant coating due to their biomimetic properties. In vitro studies demonstrated beneficial effects for 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphoethanolamin (POPE) as coating regarding interactions with cells and bacteria. Therefore, this in vivo study aimed at examining local inflammatory reactions after implantation of POPE-coated Ti plates. Ti implants with POPE attached non-covalently or covalent via octadecylphosphonic acid (OPA), with OPA alone and uncoated controls were simultaneously implanted intramuscularly in rats for 7, 14 and 56 days. The peri-implant tissue was quantitatively analyzed by immunohistochemistry for total macrophages, tissue macrophages, T cells, antigen-presenting cells and proliferating cells. Overall, both POPE-coated series were comparable to the controls. Furthermore, no differences were found between POPE coating on a covalently linked OPA monolayer and POPE coating dried from solution. Together with earlier in vitro results, this demonstrates the potential of phospholipids for implant surface modification.

During evolution and with the emergence of multicellular animals, the need arose to ward off foreign organisms that threaten the integrity of the animal body. Among many different receptors that participate in the recognition of microbial invaders, toll-like receptors (TLRs) play an essential role in mediating the innate immune response. After binding distinct microbial components, TLRs activate intracellular signaling cascades that result in an induced expression of diverse antimicrobial molecules. Because sponges (phylum Porifera) are filter feeders, they are abundantly exposed to microorganisms that represent a potential threat. Here, we describe the identification, cloning, and deduced protein sequence from 3 major elements of the poriferan innate response (to bacterial lipopeptides): the TLR, the IL-1 receptor-associated kinase-4-like protein (IRAK-4l), and a novel effector caspase from the demosponge Suberites domuncula. Each molecule shares significant sequence similarity with its homologues in higher Metazoa. Sequence homologies were found in particular within the family-specific domains toll/interleukin-1 receptor/resistance (TLR family), Ser/Thr/Tyr kinase domain (IRAK family), and CASc (caspase family). In addition, in situ hybridization and immunohistological analyses revealed an abundance of SDTLR (TLR) transcripts in epithelial layers of the sponge surface (exopinacoderm and endopinacoderm). Furthermore, it is shown that both SDTLR and SDIRAK-4 like (IRAK) are expressed constitutively, regardless of treatment with synthetic triacyl lipopeptide Pam(3)Cys-Ser-(Lys)(4). In contrast, SDCASL (caspase) expression is highly Pam(3)Cys-Ser-(Lys)(4) inducible. However, blocking of the lipopeptide with recombinant TLR prior to its application completely prevented the induced expression of this poriferan caspase. These results underscore that the phylogenetically oldest extant metazoan phylum is provided already with the signaling pathways of the antimicrobial host-defense system of Metazoa.

Like in all other Metazoa, also in sponges (Porifera) proliferation, differentiation, and death of cells are controlled by apoptotic processes, thus allowing the establishment of a Bauplan (body plan). The demosponge Lubomirskia baicalensis from the Lake Baikal is especially suitable to assess the role of the apoptotic molecules, since its grade of construction is highly elaborated into an encrusting base and branches composed of modules lined up along the apical-basal axis. The four cDNAs, ALG-2, BAK, MA-3, and Bcl-2, were isolated from this sponge species. The expression levels of these genes follow characteristic gradients. While the proapoptotic genes are highly expressed at the base of the branches and comparably low at the top, the pro-survival gene follows an opposite gradient. Parallel with the tuned expression of these genes, the activities of the apoptosis-executing enzymes caspase-8 (IETDase activity) and caspase-3 (DEVDase activity) are lowest at the top of the branch and highest at their base. This characteristic expression/activity pattern of the genes/enzymes, which had been determined in a few specimens, collected from an unpolluted, natural site, appears reversed in specimens collected from an anthropogenically polluted site. These findings indicate the involvement of apoptotic proteins in the axis formation (branches) in L. baicalensis.