Search

Defects play a critical role for the functionality and performance of materials, but the understanding of the related effects is often lacking, because the typically low concentrations of defects make them difficult to study. A prominent case is the topological defects in two-dimensional materials such as graphene. The performance of graphene-based (opto-)electronic devices depends critically on the properties of the graphene/metal interfaces at the contacting electrodes. The question of how these interface properties depend on the ubiquitous topological defects in graphene is of high practical relevance, but could not be answered so far. Here, we focus on the prototypical Stone–Wales (S–W) topological defect and combine theoretical analysis with experimental investigations of molecular model systems. We show that the embedded defects undergo enhanced bonding and electron transfer with a copper surface, compared to regular graphene. These findings are experimentally corroborated using molecular models, where azupyrene mimics the S–W defect, while its isomer pyrene represents the ideal graphene structure. Experimental interaction energies, electronic-structure analysis, and adsorption distance differences confirm the defect-controlled bonding quantitatively. Our study reveals the important role of defects for the electronic coupling at graphene/metal interfaces and suggests that topological defect engineering can be used for performance control.\ud \ud

Acepleiadylene (APD), a nonbenzenoid nonalternant isomer of pyrene, exhibits different electronic properties from pyrene, but has been rarely studied since its first synthesis in 1956, probably due to the difficulties in synthesis and further derivatization. In this work, we revisited this long-known compound and developed a new two-step synthetic route to efficiently access APD on the gram scale. Theoretical and experimental characterizations elucidated the unique properties of APD as compared with its benzenoid isomer pyrene, particularly revealing its dipolar structure with a narrow optical gap. The functionalization of APD was demonstrated for the first time, providing doubly brominated APD as a key precursor for further π-extension. As a proof of concept, a π-extended APD and a cyclotrimer nanographene (C48H24) were constructed, opening up new avenues to nonbenzenoid nanographenes with low HOMO-LUMO gaps.

The binary lead fluoride Pb3F8 was synthesized by the reaction of anhydrous HF with Pb3O4 or by the reaction of BrF3 with PbF2. The compound was characterized by single-crystal and powder X-ray diffraction, IR, Raman, and solid-state MAS 19F NMR spectroscopy, as well as thermogravimetric analysis, XP and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Solid-state quantum-chemical calculations are provided for the vibrational analyses and band assignments. The electronic band structure offers an inside view of the mixed valence compound.

Pyrene derivatives play a prominent role in organic electronic devices, including field effect transistors, light emitting diodes, and solar cells. The flexibility in the desired properties has previously been achieved by variation of substituents at the periphery of the pyrene backbone. In contrast, the influence of the topology of the central π‐electron system on the relevant properties such as the band gap or the fluorescence behavior has not yet been addressed. In this work, pyrene is compared with its structural isomer azupyrene, which has a π‐electron system with non‐alternant topology. Using photoelectron spectroscopy, near edge X‐ray absorption fine structure spectroscopy, and other methods, it is shown that the electronic band gap of azupyrene is by 0.72 eV smaller than that of pyrene. The difference of the optical band gaps is even larger with 1.09 eV, as determined by ultraviolet–visible absorption spectroscopy. The non‐alternant nature of azupyrene is also associated with a more localized charge distribution. Further insight is provided by density functional theory (DFT) calculations of the molecular properties and ab initio coupled cluster calculations of the optical transitions. The concept of aromaticity is used to interpret the major topology‐related differences., Topological Tuning: Molecular organic materials for application in organic electronics can be tailored by topological design of their π‐electron systems, instead of conventional tailoring by peripheral substituents. This is shown by a multi‐technique comparison of pyrene with its topological isomer azupyrene. The non‐alternant topology of azupyrene causes a more localized charge distribution, smaller electronic and optical gaps, and different fluorescence behavior.

The performance of graphene-based (opto)electronic devices depends critically on the graphene/metal interface formed at the metal contacts. We show here that the interface properties may be controlled by topological defects, such as the pentagon–heptagon (5–7) pairs, because of their strongly enhanced bonding to the metal. To measure the bond energy and other key properties not accessible for the embedded defects, we use azulene as a molecular model for the 5–7 defect. Comparison to its isomer naphthalene, which represents the regular graphene structure, reveals that azulene interacts more strongly with a Pt(111) surface. Its adsorption energy, as measured by single-crystal adsorption calorimetry (SCAC), exceeds that of naphthalene by up to 116 kJ/mol (or up to 50%). Both isomers undergo hybridization of their frontier orbitals with metal states, as indicated by X-ray and ultraviolet photoelectron spectroscopy (XPS/UPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy combined with molecular orbital (MO) projection analysis through dispersion-corrected, periodic density functional theory (DFT) calculations. Based on the NEXAFS/DFT analysis, the stronger bond of the 5–7 system is attributed to the different energetic response of its unoccupied frontier orbitals to adsorption. Adsorption-induced bond-length changes show substantial topology-related differences between the isomers. Electron transfer occurs in both directions through donation/back-donation, resulting in the partial occupation (deoccupation) of formerly unoccupied (occupied) orbitals, as revealed by periodic energy decomposition analysis (pEDA) for extended systems. Our model study shows that the topology of the π-electron system strongly affects its bonding to a transition metal and thus can be utilized to tailor interface properties.\ud \ud

To explore the possibility of tuning the oxidation state of a coordinated metal ion in an adsorbed tetrapyrrole complex by a minor modification of the ligand structure, multilayers and monolayers of 3H-hexaethyl-dimethyl-corrole (3H-HEDMC) on Ag(111) were in situ metalated under ultrahigh vacuum (UHV) conditions and subsequently analyzed with spectroscopic and microscopic methods. The metalation reaction leads to the formation of Fe(III)-hexaethyl-dimethyl-corrole (Fe-HEDMC). The results were compared with those for Fe-octaethyl-porphyrin (Fe-OEP), in which the Fe metal center has a formal Fe(+II) character. The analysis of the nearly unperturbed iron-corrole in the multilayer regime with X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy shows that the electronic structure of the corrole-coordinated iron is consistent with an Fe(+III) state in Fe-HEDMC. In the monolayers, the Fe centers in Fe-HEDMC and Fe-OEP interact similarly with the Ag(111) surf...

Porphyrinic materials show a range of interesting and useful optical and electrical properties. The less well-known subclass of porphyrin diacids has been used in this work to construct an ionic hybrid organic–inorganic material in combination with a halogenidometalate anion. The resulting compound, [H6TPyP][BiCl6]2 (1) (TPyP = tetra(4-pyridyl)porphyrin), has been obtained via a facile solution-based synthesis in single crystalline form. The material exhibits a broad photoluminescence emission band between 650 and 850 nm at room temperature. Single crystals of [H6TPyP][BiCl6]2 show a photocurrent in the fA and a much higher dark current in the nA range. They also display an unexpected reversible color change upon wetting with different liquids. This phenomenon has been investigated with optical spectroscopy, SEM, XPS, and NEXAFS techniques, showing that a surface-based structural coloration effect is the source of the color change. This stands in contrast to other materials where structural coloration typ...

Heptacene was generated by surface-assisted didecarbonylation of an α-diketone precursor on a Ag(111) surface. Monitoring of the surface reaction and characterization of the adsorbed heptacene was performed with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and density functional theory (DFT) calculations. The surface-assisted formation of heptacene occurs around 460 K. Both the heptacene and the precursor molecules are oriented along the high-symmetry directions of the (111) surface and their molecular π systems face towards the substrate. The interaction with the Ag(111) substrate is not laterally uniform, but appears to be strongest on the central part of the molecule, in line with the expectations from Clar's rule. In the STM images, heptacene shows a dumbbell shape, which may correspond to the substantial out-of-plane deformations of heptacene on Ag(111). As revealed by DFT, the center of the molecule is closer to the surface than the outer parts. In addition, the inner rings are most affected by charge redistribution between surface and molecule. Heptacene acts as an acceptor and receives a negative charge of -0.6e from the Ag(111) surface. Since vacuum-sublimable α-diketone precursors for even larger acenes are available, the approach is promising for the on-surface synthesis of higher acene homologues such as octacene and nonacene.