Search

Objective: Left atrial appendage closure (LAAC) concomitant to heart surgery in patients with underlying atrial fibrillation (AF) has gained attention because of long-term reduction of thromboembolic complications. As of mortality benefits in the setting of non-AF, data from both observational studies and randomized controlled trials are conflicting. Methods: On-line databases were screened for studies comparing LAAC versus no LAAC concomitant to other heart surgery. End points assessed were all-cause mortality and stroke at early and longest-available follow-up. Subgroup analyses stratified on preoperative AF were performed. Risk ratios (RR) with 95% CIs served as primary statistics. Results: Electronic search yielded 25 studies (N = 660 [158 patients]). There was no difference between LAAC and no LAAC in terms of early mortality. In the overall population analysis, LAAC reduced long-term mortality (RR, 0.86; 95% CI, 0.74-1.00; P = .05; I2 = 88%), reduced early stroke risk by 19% (RR, 0.81; 95% CI, 0.72-0.93; P = .002; I2 = 57%), and reduced late stroke risk by 13% (RR, 0.87; 95% CI, 0.84-0.90; P

Catheter ablation of septal ventricular tachycardia (VT) is challenging. Pulsed field ablation is a promising technology, potentially reaching deep substrates. We report the first sequential unipolar biventricular pulsed field ablation targeting refractory septal VT. Besides, we illustrate the importance of searching underlying cardiomyopathy in patients with recurrent multiple morphology VTs and normal magnetic resonance imaging.

Background Brugada syndrome (BrS) has been associated with sudden cardiac death in otherwise healthy subjects, and drug‐induced BrS accounts for 55% to 70% of all patients with BrS. This study aims to develop a deep convolutional neural network and evaluate its performance in recognizing and predicting BrS diagnosis. Methods and Results Consecutive patients who underwent ajmaline testing for BrS following a standardized protocol were included. ECG tracings from baseline and during ajmaline were transformed using wavelet analysis and a deep convolutional neural network was separately trained to (1) recognize and (2) predict BrS type I pattern. The resultant networks are referred to as BrS‐Net. A total of 1188 patients were included, of which 361 (30.3%) patients developed BrS type I pattern during ajmaline infusion. When trained and evaluated on ECG tracings during ajmaline, BrS‐Net recognized a BrS type I pattern with an AUC‐ROC of 0.945 (0.921–0.969) and an AUC‐PR of 0.892 (0.815–0.939). When trained and evaluated on ECG tracings at baseline, BrS‐Net predicted a BrS type I pattern during ajmaline with an AUC‐ROC of 0.805 (0.845–0.736) and an AUC‐PR of 0.605 (0.460–0.664). Conclusions BrS‐Net, a deep convolutional neural network, can identify BrS type I pattern with high performance. BrS‐Net can predict from baseline ECG the development of a BrS type I pattern after ajmaline with good performance in an unselected population.

To date, studies assessing the safety profile of 3D printing materials for application in cardiac ablation are sparse. Our aim is to evaluate the safety and feasibility of two biocompatible 3D printing materials, investigating their potential use for intra-procedural guides to navigate surgical cardiac arrhythmia ablation. Herein, we 3D printed various prototypes in varying thicknesses (0.8 mm–3 mm) using a resin (MED625FLX) and a thermoplastic polyurethane elastomer (TPU95A). Geometrical testing was performed to assess the material properties pre- and post-sterilization. Furthermore, we investigated the thermal propagation behavior beneath the 3D printing materials during cryo-energy and radiofrequency ablation using an in vitro wet-lab setup. Moreover, electron microscopy and Raman spectroscopy were performed on biological tissue that had been exposed to the 3D printing materials to assess microparticle release. Post-sterilization assessments revealed that MED625FLX at thicknesses of 1 mm, 2.5 mm, and 3 mm, along with TPU95A at 1 mm and 2.5 mm, maintained geometrical integrity. Thermal analysis revealed that material type, energy source, and their factorial combination with distance from the energy source significantly influenced the temperatures beneath the 3D-printed material. Electron microscopy revealed traces of nitrogen and sulfur underneath the MED625FLX prints (1 mm, 2.5 mm) after cryo-ablation exposure. The other samples were uncontaminated. While Raman spectroscopy did not detect material release, further research is warranted to better understand these findings for application in clinical settings.

BackgroundThe novel DiamondTemp ablation system (DTA) and EnSiteX mapping System (EAM) are both CE-Marked and FDA approved medical devices. The DTA has been validated by its manufacturer only in combination with previous version of EnSite System—EnSite Precision. The aim of this study was to evaluate compatibility of DTA with EnSite X with a previously developed protocol.MethodsThree configurations were tested: 3.1. Medtronic Generator connection Box (GCB) and AmpereConnect cable; 3.2. the Medtronic GCB-E and electrogram out cable from GCB to EAM; 3.3. Direct connection of DTA to EAM using intracardiac out cable with no GCB.ResultsThe previously developed universal method for compatibility assessment of ablation catheters and navigation systems was used with success for assessing DTA and EnSite X EAM compatibility, with reproducible results. Accuracy of DTA visualization with different setups was evaluated with a phantom model measuring distances between DTA and reference points. DTA is compatible with EnSiteX EAM with a safety and reliability profile guaranteed, if within the described specifications. In particular, careful setup is mandatory to achieve good clinical outcomes as only setup 3.2 is viable for both NavX and Voxel Mode and demonstrated satisfactory results and accuracy. Setup 3.3 showed a significant shift immediately after catheter insertion. Catheter position was away from baseline points and the dislocation increased during the radiofrequency delivery.ConclusionsPreviously developed method for compatibility assessment of ablation catheters and navigation systems has been used for a new EAM. DTA is compatible with EnSiteX EAM with proper configuration.

Management of cardiac arrhythmias often requires direct current cardioversion (DCC) to restore sinus rhythm. This intervention varies greatly between countries and hospitals, mostly regarding the organization of an elective DCC, and the choice of the sedation. The aim of this study is to assess the safety and efficacy of an elective DCC performed in a cardiology day hospital, led by trained nurses, and using intravenous Etomidate as sedation. We performed a retrospective cohort study at a single tertiary hospital in Belgium. Data were collected from January 2017 to October 2020. A total of 788 electrical cardioversions were performed on 574 patients from 2017 to 2020. Age was 70.9 ± 10 years. Restoration of sinus rhythm was obtained in 89.5% of the patients. One (0.1%) patient experienced ischemic stroke within 24 h, despite adequate anticoagulation. There were 4 (0.5%) cases of transient sinus arrest requiring atropine. Three patients (0.4%) experienced respiratory depression, requiring bag-mask ventilation but not oro-tracheal intubation. There were no cases of hypotension. No periprocedural death was reported. In conclusion, an elective electrical cardioversion performed and led by trained nurses, using Etomidate as sedation, appears to be both safe and effective.

Background: In the field of medicine, photogrammetry has played for long time a marginal role due to the significant amount of work required that made it impractical for an extended medical use. Developments in digital photogrammetry occurred in the recent years, that have steadily increased the interest and application of this technique. The present study aims to compare photogrammetry reconstruction of heart with computed tomography (CT) as a reference.Methods: The photogrammetric reconstructions of digital images from ECG imaging derived images were performed. In particular, the ventricles of 15 patients with Brugada syndrome were reconstructed by using the free Zephyr Lite software. In order to evaluate the accuracy of the technique, measurements on the reconstructions were compared to patient-specific CT scan imported in ECG imaging software UZBCIT.Result: The results showed that digital photogrammetry in the context of ventricle reconstruction is feasible. The photogrammetric derived measurements of ventricles were not statistically different from CT scan measurements. Furthermore, the analysis showed high correlation of photogrammetry reconstructions with CT scan and a correlation coefficient close to 1.Conclusion: It is possible to reproduce digital objects by photogrammetry if the process described in this study is performed. The reconstruction of the ventricles from CT scan was very close to the values of the respective photogrammetric reconstruction.

Ventricular arrhythmias still represent an important cause of morbidity and mortality, especially in patients with heart failure and reduced left ventricular ejection fraction. Amiodarone is a Class III Vaughan-Williams anti-arrhythmic drug widely used in ventricular arrhythmias for its efficacy and low pro-arrhythmogenic effect. On the other hand, a significant limitation in its use is represented by toxicity. In this review, the pharmacology of the drug is discussed to provide the mechanistic basis for its clinical use. Moreover, all the latest evidence on its role in different clinical settings is provided, including the prevention of sudden cardiac death, implanted cardioverter defibrillators, ischemic and non-ischemic cardiomyopathies. A special focus is placed on everyday clinical practice learning points, such as dosage, indications, and contraindications from the latest guidelines.

Abstract Aims To evaluate the clinical outcome in patients undergoing repeat procedures for recurrent persistent atrial fibrillation following an index cryoballoon (CB‐A) pulmonary vein isolation ablation on a mid‐term follow‐up of 12 months. Methods In this propensity score‐matched comparison, 50 patients undergoing left atrial posterior wall isolation (LAPWI) with the CB‐A were matched to 50 patients treated with additional linear ablation using radiofrequency catheter ablation (RFCA). Results Meantime to repeat the procedure was 9.74 ± 4.36 months. At 12 months follow‐up freedom from atrial tachyarrhythmias (ATas) was achieved in 82% of patients in the LAPWI group and in 62% of patients in the linear ablation group (P = .03). Regression analysis demonstrated that relapses during the blanking period and LA dimensions were independent predictors of ATas recurrences following the repeat procedure. Conclusion LAPWI using CB‐A is associated with a significantly higher freedom from atrial arrhythmias when compared with the RFCA mediated left atrial linear lesions on a mid‐term follow‐up of 12 months in patients with persAF undergoing a redo procedure.

Background3D printing technology development in medical fields allows to create 3D models to assist preoperative planning and support surgical procedures. Cardiac ischemic scar is clinically associated with malignant arrhythmias. Catheter ablation is aimed at eliminating the arrhythmogenic tissue until the sinus rhythm is restored. The scope of this work is to describe the workflow for a 3D surgical guide able to define the ischemic scar and target catheter ablation.Materials and methodsFor the patient-specific 3D surgical guide and 3D heart phantom model realization, both CT scan and cardiac MRI images were processed; this was necessary to extract anatomical structures and pathological information, respectively. Medical images were uploaded and processed in 3D Slicer. For the surgical guide modeling, images from CT scan and MRI were loaded in Meshmixer and merged. For the heart phantom realization, only the CT segmentation was loaded in Meshmixer. The surgical guide was printed in MED625FLX with Polyjet technology. The heart phantom was printed in polylactide with FDM technology.Results3D-printed surgical model was in agreement with prespecified imputed measurements. The phantom fitting test showed high accuracy of the 3D surgical tool compared with the patient-specific reproduced heart. Anatomical references in the surgical guide ensured good stability. Ablation catheter fitting test showed high suitability of the guide for different ablation tools.ConclusionA 3D-printed guide for ventricular tachycardia ablation is feasible and accurate in terms of measurements, stability, and geometrical structure. Concerning clinical use, further clinical investigations are eagerly awaited.

BackgroundBrugada syndrome (BrS) is a disease associated with ventricular arrhythmias and sudden cardiac death. Epicardial ablation has demonstrated high therapeutic efficacy in preventing ventricular arrhythmias. The purpose of this research is to define a workflow to create a patient-specific 3D-printed tool to be used as a surgical guide for epicardial ablation in BrS.MethodsDue to their mechanical properties and biocompatibility, the MED625FLX and TPU95A were used for cardiac 3D surgical guide printing. ECG imaging was used to define the target region on the right ventricular outflow tract (RVOT). CT scan imaging was used to design the model based on patient anatomy. A 3D patient-specific heart phantom was also printed for fitting test. Sterilization test was finally performed.Results3D printed surgical models with both TPU95A and MED625FLX models were in agreement with pre-specified imputed measurements. The phantom test showed retention of shape and correct fitting of the surgical tool to the reproduced phantom anatomy, as expected, for both materials. The surgical guide adapted to both the RVOT and the left anterior descending artery. Two of the 3D models produced in MED265FLX showed damage due to the sterilization process.ConclusionsA 3D printed patient-specific surgical guide for epicardial substrate ablation in BrS is feasible if a specific workflow is followed. The design of the 3D surgical guide ensures proper fitting on the heart phantom with good stability. Further investigations for clinical use are eagerly awaited.

BackgroundLeft atrial appendage (LAA) is a common source of thrombi in patients with atrial fibrillation (AF). The effect on left atrial (LA) function of the Totally Thoracoscopic (TT)-LAA exclusion with epicardial clip is currently unknown. This study aims at evaluating the effect of TT-LAA exclusion on LA function.MethodsStandalone TT-LAA exclusion with the clip device was performed in 26 patients with AF and contraindication to oral anticoagulation (OAC). A 3D CT scan, trans-esophageal echocardiography, spirometry and cerebrovascular doppler ultrasound were performed preoperatively. Clip positioning and LAA exclusion were guided and confirmed by intraoperative trans-esophageal echo. To evaluate LA function, standard transthoracic echocardiography and 2D strain of LA were performed before surgery, at discharge and at 3-month follow-up.ResultsThe mean CHA2DS2-VASc and HASBLED scores were 4.6 and 2.4 respectively. There were no major complications during the procedure. At median follow-up of 10.3 months, 1 (3.8%) non-cardiovascular death, 1 (3.8%) stroke and 4 (15.4%) cardiovascular hospitalizations occurred. At 2D strain of LA, the reservoir function decreased significantly at discharge, compared to baseline and recovered at 3-months follow-up. Furthermore, NT-proBNP increased significantly after the procedure with a return to baseline after 3 months. Changes in E/A were persistent at 3 months.ConclusionOur data in a small cohort suggest that TT-LAA exclusion with epicardial clip can be a safe procedure with regards to the atrial function. The LAA amputation impairs the reservoir LA function on the short term, that recovers over time.

Myotonia congenita is a rare neuromuscular disorder caused by CLCN1 mutations resulting in delayed muscle relaxation. Extramuscular manifestations are not considered to be present in chloride skeletal channelopathies, although recently some cardiac manifestations have been described. We report a family with autosomal dominant myotonia congenita and Brugada syndrome. Bearing in mind the previously reported cases of cardiac arrhythmias in myotonia congenita patients, we discuss the possible involvement of the CLCN1-gene mutations in primary cardiac arrhythmia.

BackgroundDue to their mechanical properties, the MED625FLX and TPU95A could be appropriate candidates for cardiac 3D surgical guide use during radiofrequency ablation (RFA) treatment.MethodsRFA aims to destroy the heart tissue, which cause arrhythmias, by applying a radiofrequency (RF) energy at critical temperature above +50.0°C, where the thermal damage is considered not reversible. This study aims to analyze the biomaterials thermal properties with different thicknesses, by testing the response to bipolar and unipolar RFA on porcine muscle samples (PMS), expressed in temperature. For the materials evaluation, the tissue temperature during RFA applications was recorded, firstly without (control) and after with the biomaterials in position. The biomaterials were considered suitable for the RFA treatment if: (1) the PMS temperatures with the samples were not statistically different compared with the control; (2) the temperatures never reached the threshold; (3) no geometrical changes after RFA were observed.ResultsBased on these criteria, none of the tested biomaterials resulted appropriate for unipolar RFA and the TPU95A failed almost all thermal tests also with the bipolar RFA. The 1.0 mm MED625FLX was modified by bipolar RFA in shape, losing its function. Instead, the 2.5 mm MED625FLX was considered suitable for bipolar RFA catheter use only.ConclusionsThe 2.5 mm MED625FLX could be used, in the design of surgical guides for RFA bipolar catheter only, because of mechanical, geometrical, and thermal properties. None of biomaterials tested are appropriate for unipolar ablation catheter because of temperature concerns. Further investigations for clinical use are eagerly awaited.

Abstract Background We investigated mitral valve annular geometry changes during the cardiac cycle in patients with severe mitral regurgitation (MR) who underwent cardiac computed tomography angiography (CCTA) prior to percutaneous mitral valve replacement or annuloplasty. Methods Fifty-one patients with severe MR and high surgical risk (Carpentier classification: 3 type I, 16 type II, 16 type IIIa, 16 type IIIb) underwent multiphase electrocardiographically gated (0–90%) CCTA, using a second generation dual-source CT scanner, as pre-procedural planning. Twenty-one patients without MR served as controls. The mitral valve annulus was segmented every 10% step of the R-R interval, according to the D-shaped segmentation model, and differences among groups were analysed by t-test or ANOVA. Results Mitral annular area and diameters were larger in MR patients compared to controls, particularly in type II. Mitral annular area varied in MR patients throughout the cardiac cycle (mean ± standard deviation of maximum and minimum area 15.6 ± 3.9 cm2 versus 13.0 ± 3.5 cm2, respectively; p = 0.001), with greater difference between annular areas versus controls (2.59 ± 1.61 cm2 and 1.98 ± 0.6 cm2, p < 0.001). The largest dimension was found in systolic phases (20–40%) in most of MR patients (n = 27, 53%), independent of Carpentier type (I: n = 1, 33%; II: n = 10, 63%; IIIa: n = 8, 50%; IIIb: n = 8, 50%), and in protodiastolic phases (n = 14, 67%) for the control group. Conclusions In severe MR, mitral annular area varied significantly throughout the cardiac cycle, with a tendency towards larger dimensions in systole.

Background Pharmacological treatment of atrial fibrillation (AF) in the setting of Brugada syndrome (BrS) is challenging. In addition, patients with BrS with an implantable cardioverter‐defibrillator (ICD) might experience inappropriate shocks for fast AF. Long‐term outcome of pulmonary vein isolation in BrS has not been well established yet, and it is still unclear whether pulmonary vein triggers are the only pathophysiological mechanism of AF in BrS. The aim of the study is to assess the long‐term outcomes in patients with BrS undergoing pulmonary vein isolation for paroxysmal AF compared with a matched cohort of patients without BrS. Methods and Results Sixty patients with BrS undergoing pulmonary vein isolation with cryoballoon catheter ablation for paroxysmal AF were matched with 60 patients without BrS, who underwent the same procedure. After a mean follow‐up of 58.2±31.7 months, freedom from atrial tachyarrhythmias was achieved in 61.7% in the BrS group and in 78.3% in the non‐BrS group (log‐rank P=0.047). In particular, freedom from AF was 76.7% in the first group and in 83.3% in the second (P=0.27), while freedom from atrial tachycardia/atrial flutter was 85% and 95% (P=0.057). In the BrS group, 29 patients (48.3%) had an ICD and 8 (27.6%) had a previous ICD‐inappropriate shock for fast AF. In the BrS cohort, ICD‐inappropriate interventions for AF were significantly reduced after ablation (3.4% versus 27.6%; P=0.01). Conclusions Pulmonary vein isolation in patients with BrS was associated with higher rate of arrhythmic recurrence. Despite this, catheter ablation significantly reduced inappropriate ICD interventions in BrS patients and can be considered a therapeutic strategy to prevent inappropriate device therapies.

IntroductionPredictors of late life-threatening arrhythmic events in Brugada syndrome (BrS) patients who received a prophylactic ICD implantation remain to be evaluated. The aim of the present long-term multicenter study was to assess the incidence and clinical-electrocardiographic predictors of late life-threatening arrhythmic events in BrS patients with a prophylactic implantable cardioverter defibrillator (ICD) and undergoing generator replacement (GR).MethodsThe study population included 105 patients (75% males; mean age 45 ± 14years) who received a prophylactic ICD and had no arrhythmic event up to first GR.ResultsThe median period from first ICD implantation to last follow-up was 155 (128–181) months and from first ICD Implantation to the GR was 84 (61–102) months. During a median follow-up of 57 (38–102) months after GR, 10 patients (9%) received successful appropriate ICD intervention (1.6%/year). ICD interventions included shock on ventricular fibrillation (n = 8 patients), shock on ventricular tachycardia (n = 1 patient), and antitachycardia pacing on ventricular tachycardia (n = 1 patient). At survival analysis, history of atrial fibrillation (log-rank test; P = 0.02), conduction disturbances (log-rank test; P < 0.01), S wave in lead I (log-rank test; P = 0.01) and first-degree atrioventricular block (log-rank test; P = 0.04) were significantly associated with the occurrence of late appropriate ICD intervention. At Cox-regression multivariate analysis, S-wave in lead I was the only independent predictor of late appropriate ICD intervention (HR: 9.17; 95%CI: 1.15–73.07; P = 0.03).ConclusionsThe present study indicates that BrS patient receiving a prophylactic ICD may experience late appropriate intervention after GR in a clinically relevant proportion of cases. S-wave in lead I at the time of first clinical evaluation was the only independent predictor of persistent risk of life-threatening arrhythmic events. These findings support the need for GR at the end of service regardless of previous appropriate intervention, mostly in BrS patients with conduction abnormalities.

Pulmonary vein isolation (PVI) represents the mainstay of atrial fibrillation (AF) ablation, and PVI with cryoballoon catheter (CB) ablation (CB-A) has proven to be as effective and safe as radiofrequency ablation (RF-A). Although AF is initiated by triggers arising from the pulmonary veins (PV) and non-PV foci, the intrinsic cardiac nervous system (ICNS) plays a significant role in the induction and maintenance of AF. The ICNS is an epicardial neural system composed of ganglionated plexi (GPs) and a complex network of interconnecting neurons. In the left atrium, the major GPs are located in proximity to the PV-left atrial junction. Vagal reactions have been described as markers of autonomic modulation during PVI with both RF-A and CB-A. The occurrence of neuromodulation during PVI with CB-A may be explained by both the anatomical relationship between the GPs and the PVs and the characteristics of the CB. Due to the CB/PV size mismatch, the CB creates a wide ablation area that extends from the PV ostium toward the antrum, possibly including the GPs. Although targeted GPs ablation, as a supplemental strategy to PVI, has been associated with a better AF outcome in patients undergoing RF-A, the additional clinical benefit of neuromodulation during PVI with CB-A remains a matter of debate. In this review, we provide an overview of the anatomy of the ICNS, the relationship between the ICNS and AF pathophysiology, and the current evidence on the clinical relevance of neuromodulation during PVI with CB-A.

BackgroundNew technologies for ablation procedures are often produced by different companies with no cross-compatibility out of the box. This is not a negligible clinical problem since those separately developed devices are often used together. The aim of this study was to develop a bench-testing method to assess compatibility between the DiamondTemp ablation system (DTA) and the Rhythmia electroanatomic mapping system (EAM).MethodsDifferent setups were tested. DTA was connected to the Rhythmia EAM using the following configurations: 3.1. An Ensite EPT GenConnect box (GCB) and Rhythmia Maestro GCB (Maestro GCB, native Rhythmia setup); 3.2. The Medtronic GCB-E and Maestro GCB; 3.3. The Medtronic GCB-E out via the Medtronic GCB-E directly to the Rhythmia at box 1 (pin A61 to A64).ResultsThe DTA location was represented in real-time on the Rhythmia EAM. A proper tracking of the DTA was observed in all setups tested by visual comparison of physical catheter movements and its representation on EAM. In configuration 3.1, a significant shift was observed after the first radio frequency (RF) application; however, further applications caused no further shift. In setup 3.2, no significant shift was observed. The setup 3.3 showed a massive shift in the catheter position before ablation compared to baseline points acquired using the Orion catheter as a reference.ConclusionsA universal and reproducible solution for compatibility testing between the various mapping systems and the ablation catheters has been described. DTA has been demonstrated as compatible with Rhythmia EAM with satisfactory results if a specific setup is used.

BackgroundCoronavirus disease 2019 (COVID-19) is a systemic disease caused by severe acute respiratory syndrome coronavirus 2. Arrhythmias are frequently associated with COVID-19 and could be the result of inflammation or hypoxia. This study aimed to define the incidence of arrhythmias in patients with COVID-19 and to correlate arrhythmias with pulmonary damage assessed by computed tomography (CT).MethodsAll consecutive patients with a COVID-19 diagnosis hospitalized at Universitair Ziekenhuis Brussel, Belgium, between March 2020 and May 2020, were screened. All included patients underwent a thorax CT scan and a CT severity score, a semiquantitative scoring system of pulmonary damage, was calculated. The primary endpoint was the arrhythmia occurrence during follow-up.ResultsIn this study, 100 patients were prospectively included. At a mean follow-up of 19.6 months, 25 patients with COVID-19 (25%) experienced 26 arrhythmic episodes, including atrial fibrillation in 17 patients, inappropriate sinus tachycardia in 7 patients, atrial flutter in 1 patient, and third-degree atrioventricular block in 1 patient. No ventricular arrhythmias were documented. Patients with COVID-19 with arrhythmias showed more often need for oxygen, higher oxygen maximum flow, longer QTc at admission, and worse damage at CT severity score. In univariate logistic regression analysis, significant predictors of the primary endpoint were: the need for oxygen therapy (odds ratio [OR] 4.59, 95% CI 1.44–14.67, p = 0.01) and CT severity score of pulmonary damage (OR per 1 point increase 1.25, 95% CI 1.11–1.4, p < 0.001).ConclusionsIn a consecutive cohort of patients with COVID-19 the incidence of cardiac arrhythmias was 25%. The need for oxygen therapy and CT severity score were predictors of arrhythmia occurrence during follow-up.

Background The rate of sudden cardiac death (SCD) in Brugada syndrome (BrS) is ≈1%/y. Noninvasive electrocardiographic imaging is a noninvasive mapping system that has a role in assessing BrS depolarization and repolarization abnormalities. This study aimed to analyze electrocardiographic imaging parameters during ajmaline test (AJT). Methods and Results All consecutive epicardial maps of the right ventricle outflow tract (RVOT‐EPI) in BrS with CardioInsight were retrospectively analyzed. (1) RVOT‐EPI activation time (RVOT‐AT); (2) RVOT‐EPI recovery time, and (3) RVOT‐EPI activation‐recovery interval (RVOT‐ARI) were calculated. ∆RVOT‐AT, ∆RVOT‐EPI recovery time, and ∆RVOT‐ARI were defined as the difference in parameters before and after AJT. SCD‐BrS patients were defined as individuals presenting a history of aborted SCD. Thirty‐nine patients with BrS were retrospectively analyzed and 12 patients (30.8%) were SCD‐BrS. After AJT, an increase in both RVOT‐AT [105.9 milliseconds versus 65.8 milliseconds, P

Electrical isolation of pulmonary veins (PVI) is the cornerstone of invasive treatment of atrial fibrillation (AF). However, arrhythmia-free survival of a PVI only approach is suboptimal in patients with persistent and long-term persistent AF. Hybrid AF ablation has been developed with the aim of combining the advantages of a thoracoscopic surgical ablation (direct visualization of anatomical structures to be spared and the possibility to perform epicardial lesions) and endocardial ablation (possibility to check line block, confirm PVI, and possibility to perform cavotricuspid isthmus ablation). Patient selection is of utmost importance. In persistent and long-term persistent AF, hybrid AF ablation demonstrated promising results in terms of AF free survival. It has been associated with a relatively low complication rate if performed in centers with expertise in hybrid procedures and experience with both surgical and endocardial ablation. Different techniques have been described, with different approaches and lesion sets. The aim of this review is to provide a state-of-the-art overview of hybrid AF ablation.

Patient-specific three-dimensional (3D) printed models have been increasingly used in many medical fields, including cardiac surgery for which they are used as planning and communication tools. To locate and plan the correct region of interest for the bypass placement during coronary artery bypass graft (CABG) surgery, cardiac surgeons can pre-operatively rely on different medical images. This article aims to present a workflow for the production of a patient-specific 3D-printed surgical guide, from data acquisition and image segmentation to final prototyping. The aim of this surgical guide is to help visualize the region of interest for bypass placement during the operation, through the use of dedicated surgical holes. The results showed the feasibility of this surgical guide in terms of design and fitting to the phantom. Further studies are needed to assess material biocompatibility and technical properties.

Papillary muscle rupture is a rare and life-threatening complication of acute myocardial infarction (AMI). We present a unique case of double papillary muscle rupture in a patient with three vessel disease and acute thrombotic occlusion of left circumflex obtuse marginal artery as the culprit lesion. (Level of Difficulty: Beginner.)