Search

Remote sensing techniques are an ever-growing reliable means for monitoring, detecting and analysing the spatial and temporal changes of solid waste and landfill sites. In this paper, different UAV and satellite sensors are used to detect, characterize and monitor dumpsites in Sicily (Italy). In particular, data acquired and processed are (i) high-density point clouds detected from LIDAR sensor; (ii) optical photograms with a resolution of 3 cm; (iii) thermal photograms with a resolution of 5 cm/pixel and (iv) multispectral photograms with 5 cm/pixel. High spatial resolution UAV multispectral and thermal remote sensing allowed for the extraction of indicators, such as the Normalized Difference Vegetation Index (NDVI) and the Land Surface Temperature (LST), useful to characterize the changes in the vegetation and the skin temperature increase due to organic waste decomposition, respectively. On the other hand, the processing of UAV optical images to extract high-resolution orthophotos and their integration with high-density point clouds obtained from LIDAR, were used to provide the identification of the effective perimeter of the landfill body and the extraction of waste volumes. These products were integrated and compared with those obtained from different kinds of medium-to-high spatial resolution satellite images, such as from Landsat, Aster, Sentinel-2 and Planetscope sensors. Results show that UAV data represents an excellent opportunity for detecting and characterizing dumpsites with an extremely high detail, and that the joint use with satellite data is recommended for having a comparison on different scales, allowing continuous monitoring. Additional SAR data methodologies will be investigated for evaluating the landfill body landslides over the years that could be integrated with high resolution satellite multispectral and hyperspectral images for monitoring dumpsites environmental impact.

The application of remote sensing for monitoring, detecting and analysing the spatial and extents and temporal changes of waste dumping sites and landfills could become a cost-effective and powerful solution. Multi-spectral satellite images, especially in the thermal infrared, can be exploited to characterize the state of activity of a landfill. Indeed, waste disposal sites, during the period of activity, can show differences in surface temperature (LST, Land Surface Temperature), state of vegetation (estimated through NDVI, Normalized Difference Vegetation Index) or soil moisture (estimated through NDWI, Normalized Difference Water Index) compared to neighboring areas. Landfills with organic waste typically show higher temperatures than surrounding areas due to exothermic decomposition activities. In fact, the biogas, in the absence or in case of inefficiency of the conveying plants, rises through the layers of organic matter and earth (landfill body) until it reaches the surface at a temperature of over 40 ° C. Moreover, in some cases, leachate contamination of the aquifers can be identified by analyzing the soil moisture, through the estimate of the NDWI, and the state of suffering of the vegetation surrounding the site, through the estimate of the NDVI. This latter can also be an indicator of soil contamination due to the presence of toxic and potentially dangerous waste when buried or present nearby. To take into account these facts, we combine the LST, NDVI and NDWI indices of the dump site and surrounding areas in order to characterize waste disposal sites. Preliminary results show how this approach can bring out the area and level of activity of known landfill sites. This could prove particularly useful for the definition of intervention priorities in landfill remediation works.

A lengthy period of eruptive activity from the summit craters of Mt. Etna started in January 2011. It culminated in early December 2015 with a spectacular sequence of intense eruptive events involving all four summit craters (Voragine, Bocca Nuova, New Southeast Crater, and Northeast Crater). The activity consisted of high eruption columns, Strombolian explosions, lava flows and widespread ash falls that repeatedly interfered with air traffic. The most powerful episode occurred on 3 December 2015 from the Voragine. After three further potent episodes from the Voragine, activity shifted to the New Southeast Crater on 6 December 2015, where Strombolian activity and lava flow emission lasted for two days and were fed by the most primitive magma of the study period. Activity once more shifted to the Northeast Crater, where ash emission and weak Strombolian activity took place for several days. Sporadic ash emissions from all craters continued until 18 December, when all activity ceased. Although resembling the summit eruptions of 1998–1999, which also involved all four summit craters, this multifaceted eruptive sequence occurred in an exceptionally short time window of less than three days, unprecedented in the recent activity of Mt. Etna. It also produced important morphostructural changes of the summit area with the coalescence of Voragine and Bocca Nuova in a single large crater, the “Central Crater”, reproducing the morphological setting of the summit cone before the formation of Bocca Nuova in 1968. The December 2015 volcanic crisis was followed closely by the staff of the Etna Observatory to monitor the on-going activity and forecast its evolution, in accordance with protocols agreed with the Italian Civil Protection Department.

Volcanic processes occur in a wide range of temporal and spatial scales. However, a key step of magma ascent is recognizable in the dynamics of gas and magma in the shallow plumbing system, where volatiles play a fundamental role in controlling the eruptive style. With the aim of investigating shallow degassing processes, an experimental setup was deployed at Mt. Yasur, an active volcano located in Tanna Island (Vanuatu arc), from 9th to 12th July 2011. The setup comprised high-speed and thermal cameras, as well as a microphone, capable of recording both in the infrasonic and audible range. The analysis of acoustic signals, validated by observing images from the high-speed and thermal cameras, has enabled characterizing the explosive activity during the investigated period. Two types of explosions, distinct for spectral features and waveforms, were observed: (i) minor events, corresponding to small overpressurized bursts, occurring almost continuously; (ii) major events, characterizing the Strombolian activity at Mt. Yasur. By investigating variation in the occurrence rate of the minor events, we found that, on a short timescale, the dynamics responsible for the two types of explosions are decoupled. These results, together with previous literature data, bring additional evidence of the existence of distinct sources of degassing. Finally, major events can be distinguished as emergent events, i.e. long-lasting signals, corresponding to ash-rich explosions, and impulsive events, featuring shorter duration and larger amplitude.

Archaeoseismology can provide a useful chronological tool for constraining earthquakes and documenting significant evidence that would otherwise be lost. In this paper, we report a case of surface faulting on ancient man-made structures belonging to the archaeological site of Santa Venera al Pozzo situated along the eastern flank of Mt. Etna volcano in eastern Sicily (southern Italy), which is affected by well-developed tectonic faults. Geological surveys highlight a set of fractures affecting the archaeological ruins, suggesting the occurrence of a capable fault zone across the area. An integrated geophysical survey was carried out in order to identify the main subsurface tectonic discontinuity ascribable to the fault zone. The information derived from different geophysical techniques, such as electrical resistivity tomography, seismic refraction tomography, ground-penetrating radar, and magnetic surveys allowed us to infer that the fractures observed at the surface could have been produced by coseismic rupture. They are conceivably linked to a strong earthquake that probably occurred in the Roman period, around mid-end of the third-century AD; time constraints are inferred through the dating of buildings of the archaeological site.

Between 30 August and 15 December 2006, Mt Etna, Italy, underwent both effusive and explosive activity which took place from the South-East Crater, one of its summit craters. Several paroxysmal episodes followed in succession, separated by a few days of minor activity and characterised by dissimilar explosive style and intensity. Here, we report one of the most studied and powerful episodes, which started early in the morning on 24 November 2006 and lasted about 13 h. Excellent weather conditions enabled reconstructing in detail the onset and evolution of the eruptive phenomena both by live-camera recordings and direct observations. The explosive activity consisted of powerful Strombolian activity alternating with short periods of lava fountains. A weak volcanic plume rose up to ~ 2 km above the volcanic vent, followed by tephra fallout which covered the SE and S flanks of Etna. Campaigns allowed collecting about 40 tephra samples and mapping the fallout deposit. The clockwise shifting of the volcanic plume during the eruption caused the different timing of the fallout on the ground, thus widening the dispersal area. Voronoi's method was used to evaluate: i) the total grain-size distribution, indicating that the fallout deposit peaked at 1 ϕ, and, for the first time at Etna, ii) the total componentry distribution, finding that most of the particles were lithics, with a low proportion of juvenile vs. lithics (34:65). The total erupted mass was estimated ~ 1.9 × 108 kg, corresponding to a mass eruption rate of ~ 5 × 103 kg s− 1. Physical parameters and textural features of the erupted products suggest that the 24 November 2006 explosive event may be classified as small-sized in the recent history of Etna, and that the eruptive dynamic was mainly governed by magma/gas decoupling, which produced relatively fine-grained fallout deposits containing unusual elongated sideromelane ash particles.

International audience; Between 1994 and 2010, we completed 16 thermal surveys of Vulcano's Fossa fumarole field (Aeolian Islands, Italy). In each survey, between 400 and 1,200 vent temperatures were collected using a thermal infrared thermometer from distances of ∼1 m. The results show a general decrease in average vent temperature during 1994-2003, with the average for the entire field falling from ∼220°C in 1994 to ∼150°C by 2003. However, between 2004 and 2010, we witnessed heating, with the average increasing to ∼190°C by 2010. Alongside these annual-scale field-wide trends, we record a spatial re-organisation of the fumarole field, characterised by shut down of vent zones towards the crater floor, matched by rejuvenation of zones located towards the crater rim. Heating may be expected to be associated with deflation because increased amounts of vaporisation will remove volume from the hydrothermal system Gambino and Guglielmino (J Geophys Res 113:B07402, 2008). However, over the 2004-2010 heating period, no ground deformation was observed. Instead, the number of seismic events increased from a typical rate of 37 events per month during 1994-2000 to 195 events per month during 2004-2010. As part of this increase, we noticed a much greater number of high-frequency events associated with rock fracturing. We thus suggest that the heating event of 2004-2010 was the result of changed permeability conditions, rather than change in the heat supply from the deeper magmatic source. Within this scenario, cooling causes shut down of lower sectors and re-establishment of pathways located towards the crater rim, causing fracturing, increased seismicity and heat flow in these regions. This is consistent with the zone of rejuvenation (which lies towards and at the rim) being the most favourable location for fracturing given the stress field of the Fossa cone Schöpa et al. (J Volcanol Geotherm Res 203:133-145, 2011); it is also the most established zone, having been active at least since the early twentieth century. Our data show the value of deploying multi-disciplinary geophysical campaigns at degassing (fumarolic) hydrothermal systems. This allows more complete and constrained understanding of the true heat loss dynamics of the system. In the case study presented here, it allows us to distinguish true heating from apparent heating phases. While the former are triggered from the bottom-up, i.e. they are driven by increases in heat supply from the magmatic source, the latter are triggered from the top-down, i.e. by changing permeability conditions in the uppermost portion of the system to allow more efficient heat flow over zones predisposed to fracturing.

Ground-based thermal infrared surveys can contribute to complete heat budget inventories for fumarole fields. However, variations in atmospheric conditions, plume condensation and mixed-pixel effects can complicate vent area and temperature measurements. Analysis of vent temperature frequency distributions can be used, however, to characterise and quantify thermal regions within a field. We examine this using four thermal infrared thermometer and thermal image surveys of the Vulcano Fossa fumarole field (Italy) during June 2004 and July 2005. These surveys show that regions occupied by low temperature vents are characterised by distributions that are tightly clustered around the mean (i.e., the standard deviation is low), highly peaked (positive kurtosis) and skewed in the low temperature direction (negative skewness). This population is associated with wet fumaroles, where boiling controls maximum temperature to cause a narrow distribution with a mode at 90–100°C. In contrast, high temperature vent regions have distributions that are widely spread about the mean (i.e., the standard deviation is high), relatively flat (negative kurtosis) and skewed in the high temperature direction (positive skewness). In this dry case, fumaroles are water-free so that maximum temperatures are not fixed by boiling. As a result greater temperature variation is possible. We use these results to define two vent types at Vulcano on the basis of their thermal characteristics: (1) concentrated (localized) regions of high temperature vents, and (2) dispersed low temperature vents. These occur within a much larger region of diffuse heat emission across which surfaces are heated by steam condensation, the heat from which causes elevated surface temperatures. For Vulcano's lower fumarole zone, high and low temperature vents occupied total areas of 3 and 6 m2, respectively, and occurred within a larger (430 m2) vent-free zone of diffuse heat emission. For this lower zone, we estimate that 21–43 × 103 W of heat was lost by diffuse heat emission. A further 4.5 × 103 W was lost by radiation from high temperature vents, and 6.5 × 103 W from low temperature vents. Thus, radiative heat losses from high and low temperature vents within Vulcano's lower fumarole zone respectively account for 10% and 15% of the total heat lost from this zone. This shows that radiation from open vents can account for a non-trivial portion of the total fumarole field heat budget.

The 26 October 2002–28 January 2003 eruption of Mt. Etna volcano was characterised by lava effusion and by an uncommon explosivity along a 1 km-long-eruptive fissure on the southern, upper flank of the volcano. The intense activity promoted rapid growth of cinder cones and several effusive vents. Analysis of thermal images, recorded throughout the eruption, allowed investigation of the distribution of vents along the eruptive fissure, and of the nature of explosive activity. The spatial and temporal distribution of active vents revealed phases of dike intrusion, expansion, geometric stabilization and drainage. These phases were characterised by different styles of explosive activity, with a gradual transition from fire fountaining through transitional phases to mild strombolian activity, and ending with non-explosive lava effusion. Here we interpret the mechanisms of the dike emplacement and the eruptive dynamics, according to changes in the eruptive style, vent morphology and apparent temperature variations at vents, detected through thermal imaging. This is the first time that dike emplacement and eruptive activity have been tracked using a handheld thermal camera and we believe that its use was crucial to gain a detailed understanding of the eruptive event.

Volcanic eruptions may create a wide range of risks in inhabited areas and, as a consequence, major economic damage to the surrounding territory. An example of volcanic hazard was given between 1998 and 2001 by Mt. Etna volcano, in Italy, with its frequent paroxysmal explosive activity that caused more than a hundred fire-fountain episodes. In the period January–June 2000, in particular, 64 lava fountains took place at the Southeast Crater. During the most intense explosive phase of each episode, a sustained column often formed, reaching up to 6 km above the eruptive vent. Then, the column started to expand laterally causing more or less copious tephra fallout on the slopes of Etna; ash and lapilli, therefore, constituted a serious danger for vehicular and air traffic. A software and hardware warning system was developed to mitigate the volcanic hazard indicating the areas affected by potential ash and lapilli fallout. The alert system was mainly based on the good correspondence between the pattern of volcanic tremor amplitude and the evolution of explosive activity. When a fixed tremor threshold was exceeded, a semiautomatic process started to send faxes to Civil Defence and Municipalities directly affected by tephra fallout, together with information on wind directions from the Meteorological Office. The application of this methodology, during the last 14 eruptive episodes in 2000 and the 14 events occurred in 2001, demonstrated the good correspondence between the forecasts on the areas affected by tephra fallout and the effective tephra distribution on land. Despite the integrity of the performance provided by the alert system, small discrepancies occurred in the technical procedure of alerting, for which possible solutions have been discussed. The improvement of this type of system, could become basic for the Etnean region and be proposed for similar volcanic areas throughout the world.

The use of a hand-held thermal camera during the 2002–2003 Stromboli effusive eruption proved essential in tracking the development of flow field structures and in measuring related eruption parameters, such as the number of active vents and flow lengths. The steep underlying slope on which the flow field was emplaced resulted in a characteristic flow field morphology. This comprised a proximal shield, where flow stacking and inflation caused piling up of lava on the relatively flat ground of the vent zone, that fed a medial–distal lava flow field. This zone was characterized by the formation of lava tubes and tumuli forming a complex network of tumuli and flows linked by tubes. Most of the flow field was emplaced on extremely steep slopes and this had two effects. It caused flows to slide, as well as flow, and flow fronts to fail frequently, persistent flow front crumbling resulted in the production of an extensive debris field. Channel-fed flows were also characterized by development of excavated debris levees in this zone (Calvari et al. 2005). Collapse of lava flow fronts and inflation of the upper proximal lava shield made volume calculation very difficult. Comparison of the final field volume with that expecta by integrating the lava effusion rates through time suggests a loss of ~70% erupted lava by flow front crumbling and accumulation as debris flows below sea level. Derived relationships between effusion rate, flow length, and number of active vents showed systematic and correlated variations with time where spreading of volume between numerous flows caused an otherwise good correlation between effusion rate, flow length to break down. Observations collected during this eruption are useful in helping to understand lava flow processes on steep slopes, as well as in interpreting old lava–debris sequences found in other steep-sided volcanoes subject to effusive activity.

The 5 April 2003 paroxysmal explosion at Stromboli volcano was one of the strongest explosive events of the last century. It occurred while the effusive eruption, begun on 28 December 2002 and finished on 22 July 2003, was still on going and the summit craters of the volcano were obstructed. In this paper, we present a reconstruction of the sequence of events based on thermal and visual images collected from helicopter before, during and immediately after the paroxysm. One month before the blast, ash emission and temperature increase at the bottom of the summit craters were observed. An increasing amount of juvenile components in the emitted ash during March suggested that the magma level within the crater was rising accordingly. Hot degassing vents at the bottom of the summit craters were not persistent, and the craters remained almost entirely obstructed by talus accumulation until the paroxysm occurred. Three minutes before the explosion, we recorded a significant increase in temperature inside Crater 1, accompanied by a thicker gas plume. Thirty-two seconds before the blast, reddish ash was emitted from Crater 1. The paroxysm produced a vulcanian explosion that opened the feeder conduit, obstructed for over three months. The blast was accompanied by a shock wave recorded by the INGV seismic network at 07:13:37 GMT. Explosions with hot material started from Crater 1, and after 15 s propagated to Crater 3, about 100 m away. The velocity of ejecta was ∼80 m s − 1 , and increased when the eruptive plumes from both craters merged together during the vulcanian phase. An eruptive column rose 1 km above the top of the volcano, and explosions continued mainly at Crater 3. The paroxysm lasted about 9 min, with bombs up to 4 m wide falling on the village of Ginostra, on the west flank of the island, and destroying two houses. This event signalled the start of the declining phase of the effusive eruption, suggesting that the feeder conduit was returning to its former steady conditions, with open vents and continuous, mild strombolian activity.

Mount Etna is an open conduit volcano, characterised by persistent activity, consisting of degassing and explosive phenomena at summit craters, frequent flank eruptions, and more rarely, eccentric eruptions. All eruption typologies can give rise to lava flows, which represent the greatest hazard by the volcano to the inhabited areas. Historical documents and scientific papers related to the 20th century effusive activity have been examined in detail, and volcanological parameters have been compiled in a database. The cumulative curve of emitted lava volume highlights the presence of two main eruptive periods: (a) the 1900–1971 interval, characterised by a moderate slope of the curve, amounting to 436 × 106 m3 of lava with average effusion rate of 0.2 m3/s and (b) the 1971–1999 period, in which a significant increase in eruption frequency is associated with a large issued lava volume (767 × 106 m3) and a higher effusion rate (0.8 m3/s). The collected data have been plotted to highlight different eruptive behaviour as a function of eruptive periods and summit vs. flank eruptions. The latter have been further subdivided into two categories: eruptions characterised by high effusion rates and short duration, and eruptions dominated by low effusion rate, long duration and larger volume of erupted lava. Circular zones around the summit area have been drawn for summit eruptions based on the maximum lava flow length; flank eruptions have been considered by taking into account the eruptive fracture elevation and combining them with lava flow lengths of 4 and 6 km. This work highlights that the greatest lava flow hazard at Etna is on the south and east sectors of the volcano. This should be properly considered in future land-use planning by local authorities.

A safe, easy and rapid method to calculate lava effusion rates using hand-held thermal image data was developed during June 2003 at Stromboli Volcano (Italy). We used a Forward Looking Infrared Radiometer (FLIR) to obtain images of the active lava flow field on a daily basis between May 31 and June 16, 2003. During this time the flow field geometry and size (where flows typically a few hundred meters long were emplaced on a steep slope) meant that near-vertical images of the whole flow field could be captured in a single image obtained from a helicopter hovering, at an altitude of 750 m and ∼1 km off shore. We used these images to adapt a thermally based effusion rate method, previously applied to low and high spatial resolution satellite data, to allow automated extraction of effusion rates from the hand-held thermal infrared imagery. A comparison between a thermally-derived (0.23–0.87 m3 s−1) and dimensionally-derived effusion rate (0.56 m3 s−1) showed that the thermally-derived range was centered on the expected value. Over the measurement period, the mean effusion rate was 0.38±0.25 m3 s−1, which is similar to that obtained during the 1985–86 effusive eruption and the time-averaged supply rate calculated for normal (non-effusive) Strombolian activity. A short effusive pulse, reaching a peak of ∼1.2 m3 s−1, was recorded on June 3, 2003. One explanation of such a peak would be an increase in driving pressure due to an increase in the height of the magma contained in the central column. We estimate that this pulse would require the magma column to attain a height of ∼190 m above the effusive vent, which is approximately the elevation difference between the vent and the floor of the NE crater. Our approach gives an easy-to-apply method that has the potential to provide effusion rate time series with a high temporal resolution.

Two strong flank eruptions occurred in July–August 2001 and from late October 2002 to late January 2003 at Mt. Etna volcano. The two eruptions mainly involved the upper southern flank of the volcano, a particularly active area during the last 30 years, damaging several tourist facilities and threatening some villages. The composite eruptive activity on the upper southern flank of Mt. Etna during 2001–2003 has confirmed “a posteriori” the results of a multidisciplinary study, started well before its occurrence by combining geological, seismic and geochemical data gathered in this part of the volcano. We were able, in fact, to highlight fractured zones likely to be re-activated in the near future in this area, where the largest majority of eruptive fissures in the recent past opened along N120° to N180° ranging directions. The spatial distribution of earthquake epicentres during the period June 30th 2000–June 30th 2001 showed the greatest frequency in a sector compatible with both the direction of the main fissures of the pre-2001 period and that of the 2001 and 2002 lateral eruptions. Soil CO2 and soil temperature surveys carried out in the studied area during the last 3 years have revealed anomalous release of magmatic fluids (mainly CO2 and water vapour) along some NNW–SSE-trending volcano-tectonic structures of the area even during inter-eruptive periods, indicating persistent convective hydrothermal systems at shallow depth connected with the main feeder conduits of Etna. The temporal changes in both seismic and geochemical data from June 30th, 2000 to June 30th, 2001 were compared with the evolution of volcanic activity. The comparison allowed to recognize at least two sequences of anomalous signals (August to December 2000 and April to June 2001), likely related to episodes of step-like magma ascent towards the surface, as indicated by the following eruptive episodes. The N120° to N180° structural directions are in accord with one of the main structural lines affecting eastern Sicily; they would be important pathways for magma uprise to the surface that will keep on feeding the eruptive activity of Etna in the near future. This study also pointed out the high instability of the southern slope of Etna, a sector where the potential hazard by lava flow invasion will remain high also in the near future.

The 2002–03 Mt Etna flank eruption began on 26 October 2002 and finished on 28 January 2003, after three months of continuous explosive activity and discontinuous lava flow output. The eruption involved the opening of eruptive fissures on the NE and S flanks of the volcano, with lava flow output and fire fountaining until 5 November. After this date, the eruption continued exclusively on the S flank, with continuous explosive activity and lava flows active between 13 November and 28 January 2003. Multi-disciplinary data collected during the eruption (petrology, analyses of ash components, gas geochemistry, field surveys, thermal mapping and structural surveys) allowed us to analyse the dynamics of the eruption. The eruption was triggered either by (i) accumulation and eventual ascent of magma from depth or (ii) depressurisation of the edifice due to spreading of the eastern flank of the volcano. The extraordinary explosivity makes the 2002–03 eruption a unique event in the last 300 years, comparable only with La Montagnola 1763 and the 2001 Lower Vents eruptions. A notable feature of the eruption was also the simultaneous effusion of lavas with different composition and emplacement features. Magma erupted from the NE fissure represented the partially degassed magma fraction normally residing within the central conduits and the shallow plumbing system. The magma that erupted from the S fissure was the relatively undegassed, volatile-rich, buoyant fraction which drained the deep feeding system, bypassing the central conduits. This is typical of most Etnean eccentric eruptions. We believe that there is a high probability that Mount Etna has entered a new eruptive phase, with magma being supplied to a deep reservoir independent from the central conduit, that could periodically produce sufficient overpressure to propagate a dyke to the surface and generate further flank eruptions.

Regular surveys with a thermal camera from both ground- and helicopter-based surveys have been carried out on Stromboli since October 2001. This data set allowed us to detect morphological changes in Stromboli's summit craters produced by major explosions and to track an increase in volcanic activity associated with a heightened magma level within the main conduit that preceded the 2002―2003 effusive eruption. Together with thermal measurements, geophysical surveys performed in May and September/October 2002 highlighted clear increases in the amplitude of very long period (VLP) events, consistent with the ascent of the magma column above the VLP source region. The increased magma level was probably induced by elevated pressure in the deep feeding system, controlled by regional tectonic stress. This, in turn, pressurized the uppermost part of the crater terrace, producing greater soil permeability and soil degassing. Eventually, the magma loading caused the NW flank of the summit craters to fracture, allowing lava to flood out at high effusion rates on 28 December 2002, starting an approximately 6-month-long effusive eruption.

Stromboli's 5 April 2003 explosion sent an ash plume to 4 km and blocks to 2 km, representing one of the most powerful events over the past 100 years. A thermal sensor 450 m east of the vent and a helicopter-flown thermal camera captured the event dynamics allowing detailed reconstruction. This review links previous studies providing a complete collation and clarification of the actual event chronology, while showing how relatively inexpensive thermal sensors can be used to provide great insight into processes that cannot be observed from locations outside the eruption cloud. The eruption progressed through four phases, comprised 29 discrete explosions, and lasted 373 s. The opening phase (phase 1) comprised ∼30 s of precursory ash emission, with stronger emission beginning after 17 s. This was abruptly terminated by the main blast of phase 2 that comprised emission of a rapidly expanding ash cloud followed, after 0.4 s, by a powerful jet with velocities of up to 320 m/s. A second explosive phase (phase 3) began 38 s later and involved ascent of a phoenix cloud and explosive emission above a lateral vent lasting 75 s. This was followed by a 175-s-long phase of weaker, pulsed emission. The eruption was terminated by a series of three explosions (phase 4) sending ash to ∼600 m at velocities of 27―45 m/s and lasting 87 s. Together, these results have shown that a low-energy opening phase was followed by the highest-energy phase. Each phase itself comprised groups of discrete explosions, with energy of the explosions diminishing during the two final phases.

Using thermal infrared images recorded by a permanent thermal camera network maintained on Stromboli volcano (Italy), together with satellite and helicopter‐based thermal image surveys, we have compiled a chronology of the events and processes occurring before and during Stromboli’s 2007 effusive eruption. These digital data also allow us to calculate the effusion rates and lava volumes erupted during the effusive episode. At the onset of the 2007 eruption, two parallel eruptive fissures developed within the northeast crater, eventually breaching the NE flank of the summit cone and extending along the eastern margin of the Sciara del Fuoco. These fed a main effusive vent at 400m above sea level to feed lava flows that extended to the sea. The effusive eruption was punctuated, on 15 March, by a paroxysm with features similar to those of the 5 April paroxysm that occurred during the 2002–2003 effusive eruption.A total of between 3.2 × 10^6 and 11 × 10^6 m^3 of lava was erupted during the 2007 eruption, over 34 days of effusive activity. More than half of this volume was emplaced during the first 5.5 days of the eruption. Although the 2007 effusive eruption had an erupted volume comparable to that of the previous (2002–2003) effusive eruption, it had a shorter duration and thus a mean output rate (=total volume divided by eruption duration) that was 1 order of magnitude higher than that of the 2002–2003 event (∼2.4 versus 0.32 ± 0.28 m^3 s^−1). In this paper, we discuss similarities and differences between these two effusive events and interpret the processes occurring in 2007 in terms of the recent dynamics witnessed at Stromboli.

where Tcore and Tsurf are the lava core and lava surface temperature respectively, Ta is the ambient (atmospheric) temperature, e is the lava emissivity and s is the StefanBoltzman constant. However, this is the incorrect equation for the case considered by Harris et al. [2007], it being derived from a heat flux balance at the lava flow surface. The model actually employed within Harris et al. [2007] was derived by using the Stefan problem to estimate surface temperature as a function of the heat flux, Q

[1] Theoretically- and empirically-derived cooling rates for active pāhoehoe lava flows show that surface cooling is controlled by conductive heat loss through a crust that is thickening with the square root of time. The model is based on a linear relationship that links log(time) with surface cooling. This predictable cooling behavior can be used assess the age of recently emplaced sheet flows from their surface temperatures. Using a single thermal image, or image mosaic, this allows quantification of the variation in areal coverage rates and lava discharge rates over 48 hour periods prior to image capture. For pāhoehoe sheet flow at Kīlauea (Hawai`i) this gives coverage rates of 1–5 m2/min at discharge rates of 0.01–0.05 m3/s, increasing to ∼40 m2/min at 0.4–0.5 m3/s. Our thermal chronometry approach represents a quick and easy method of tracking flow advance over a three-day period using a single, thermal snap-shot.

[1] The 2001 Etna eruption was characterized by a complex temporal evolution with the opening of seven eruptive fissures, each feeding different lava flows. This work describes a method adopted to obtain the three-dimensional geometry of the whole lava flow field and for the reconstruction, based on topographic data, of the temporal evolution of the largest lava flow emitted from a vent located at 2100 m a.s.l. Preeruption and posteruption Digital Elevation Models (DEM) were extracted from vector contour maps. Comparison of the two DEMs and analysis of posteruption orthophotos allowed us to estimate flow area, thickness, and bulk volume. Additionally, the two-dimensional temporal evolution of the 2100 flow was precisely reconstructed by means of maps compiled during the eruption. These data, together with estimates of flow thickness, allowed us to evaluate emitted lava volumes and in turn the average volumetric flow rates The analysis performed in this paper provided, a total lava bulk volume of 40.1 × 106 m3 for the whole lava flow field, most of which emitted from the 2100 vent (21.4 × 106 m3). The derived effusion rate trend shows an initial period of waxing flow followed by a longer period of waning flow. This is in agreement not only with the few available effusion rate measurements performed during the eruption, but also with the theoretical model of Wadge (1981) for the temporal variation in discharge during the tapping of a pressurized source.

[1] Effusive activity at Stromboli is uncommon, and the 2002–2003 flank eruption gave us the opportunity to observe and analyze a number of complex volcanic processes. In particular, the use of a handheld thermal camera during the eruption allowed us to monitor the volcano even in difficult weather and operating conditions. Regular helicopter-borne surveys with the thermal camera throughout the eruption have significantly improved (1) mapping of active lava flows; (2) detection of new cracks, landslide scars, and obstructions forming within and on the flanks of active craters; (3) observation of active lava flow field features, such as location of new vents, tube systems, tumuli, and hornitos; (4) identification of active vent migration along the Sciara del Fuoco; (5) monitoring of crater’s inner morphology and maximum temperature, revealing magma level changes within the feeding conduit; and (6) detection of lava flow field endogenous growth. Additionally, a new system developed by A. J. L. Harris and others has been applied to our thermal data, allowing daily calculation of effusion rate. These observations give us new insights on the mechanisms controlling the volcanic system.

[1] The 2004–05 eruption of Etna was characterised by outpouring of degassed lava from two vents within Valle del Bove. After three months of eruption lava volumes were estimated to be between 18.5 and 32 × 106 m3, with eruption rate between 2.3 and 4.1 m3/s. Petrological analyses show that magma is resident in the shallow plumbing system, emplaced during the last South-East Crater activity. SO2 flux data show no increase at the onset of the eruption and SO2/HCl ratios in gas emitted from the eruptive fissure are consistent with a degassed magma. No seismic activity was recorded prior to eruption, unlike eruptions observed since the 1980's. The purely effusive nature of this eruption, fed by a degassed, resident magma and the fracture dynamics suggest that magmatic overpressure played a limited role in this eruption. Rather, lateral spreading of Etna's eastern flank combined with general inflation of the edifice triggered a geodynamically-controlled eruption.

Thermal imaging has recently been introduced in volcanology to analyse a number of different volcanic processes. This system allows us to detect magma movements within the summit conduits of active volcanoes, and then to reveal volcanic activity within the craters even through the thick curtain of gases usually released by volcanoes such as Mt Etna and Stromboli. Thermal mapping is essential during effusive eruptions, since it distinguishes lava flows of different age and concealed lava tubes’ path, improving hazard evaluation. Recently, thermal imaging has also been applied to reveal failure planes and instability on the flanks of active volcanoes. Excellent results have been obtained in terms of volcanic prediction during the two recent eruptions of Mt Etna and Stromboli, both occurred in 2002-2003. On Etna, thermal images monthly recorded on the summit of the volcano revealed the opening of fissure systems several months in advance. After the onset of the flank eruption, daily thermal mapping allowed us to monitor a complex lava flow field spreading within a forest, below a thick plume of ash and gas. At Stromboli, helicopter-borne thermal surveys allowed us to recognise the opening of fractures along the Sciara del Fuoco, one hour before the large failure that caused severe destruction on the island on 30 December 2002. This was the first time ever that volcanic flank collapse has been monitored with a thermal camera. In addition, we could follow the exceptional explosive event of the 5th April 2003 at Stromboli from helicopter with a thermal camera recording images immediately before, during and after the huge explosion. We believe that a more extended use of thermal cameras in volcano monitoring, both on the ground and from fixed positions, will significantly improve our understanding of volcanic phenomena and hazard evaluations during volcanic crisis.

[1] The 2002 effusive flank eruption at Stromboli volcano started on December 28, after several months of strong explosive activity at the summit craters. On December 30, the seismic network recorded two large flank failures and associated tsunami waves. This is the first time that a flank collapse and tsunami, and their associated phenomena, have been recorded by a multi-disciplinary monitoring system. Volcanological and geophysical monitoring, as well as thermal surveys performed immediately before and after the failure, allowed us to define and interpret the sequence of events. The still on-going eruption has provided, for the first time, the opportunity to look into the dynamics of Stromboli's effusive eruptions, flank failure and landslide formation, and their potential hazard.

[1] The Southeast Crater of Mount Etna (Italy) was characterized by a violent eruptive activity between 26 January and 24 June 2000. This activity produced 64 lava fountain episodes with repose periods from 3 hours to 10 days. We estimated a volume of about 15–20 × 106 m3 lava and at least 2–3 × 106 m3 of tephra. We compared the paroxysmal volcanic activity to its associated seismic signature: The high number of events highlighted a strict correlation between tremor and volcanic activity. Seismic and volcanic characteristics, such as the frequency of occurrence, the duration of lava fountains and the associated tremor energy, suggested the subdivision of the studied period into two stages separated by the 20 February event. Combining volcanic with seismic data, we observed some useful relationships among lava fountain height, sustained column height and Reduced Displacement; in addition, we found that the entire episode was well correlated with the duration of the amplitude increase. Computing the tremor energy linked to each event, the total energy associated with lava fountains episodes results in 76% of the energy released during the whole period. Finally, the different ratios among the overall spectral amplitude of the seismic signals of the stations located at different altitudes suggested to us the elaboration of a simple qualitative model to explain the dynamic behavior of the tremor source during the whole episode.