Search

A variety of mathematical models of the cardiovascular system have been suggested over several years in order to describe the time-course of a series of physiological variables (i.e. heart rate, cardiac output, arterial pressure) relevant for the compensation mechanisms to perturbations, such as severe haemorrhage. The current study provides a simple but realistic mathematical description of cardiovascular dynamics that may be useful in the assessment and prognosis of hemorrhagic shock. The present work proposes a first version of a differential-algebraic equations model, the model dynamical ODE model for haemorrhage (dODEg). The model consists of 10 differential and 14 algebraic equations, incorporating 61 model parameters. This model is capable of replicating the changes in heart rate, mean arterial pressure and cardiac output after the onset of bleeding observed in four experimental animal preparations and fits well to the experimental data. By predicting the time-course of the physiological response after haemorrhage, the dODEg model presented here may be of significant value for the quantitative assessment of conventional or novel therapeutic regimens. The model may be applied to the prediction of survivability and to the determination of the urgency of evacuation towards definitive surgical treatment in the operational setting.

La modellizzazione matematica è diventata ormai uno strumento essenziale nell’avanzamento delle conoscenze in qualsiasi campo della scienza, dall’econometria alla psicologia, dalla chimica all’epidemiologia, come vissuto di recente nella pandemia da SARS-coV-2. Anche quelle che erano una volta discipline “soft” come la biomedicina o l’ecologia possono ora usufruire di tecniche di rappresentazione ed esplicazione dei processi estremamente utili alla comprensione delle dinamiche in gioco. Questa evoluzione, dovuta in non piccola parte all’attuale disponibilità di abbondante potenza di calcolo elettronico a costi ridotti, non è però opera ed appannaggio soltanto della nostra generazione. Lo stesso Consiglio nazionale delle ricerche (CNR) fondato nel 1923 ha avuto come primo presidente il Prof. Vito Volterra, uno dei fondatori della biomatematica, il cui nome è storicamente legato alle equazioni di dinamica di popolazione da lui introdotte insieme a Lotka. Nel solco di tale tradizione oggi la biomatematica ha un ruolo primario nello studio delle dinamiche di inquinamento, diffusione di sostanze tossiche, bioaccumulo nelle specie di rilevanza alimentare, tossicocinetica, tossicodinamica ed epidemiologia delle malattie legate all’inquinamento. In tutte queste discipline viene affidato alla biomatematica il ruolo di svolgere o supportare interpretazioni quantitative dei dati e facilitare l’inquadramento delle esperienze specifiche degli specialisti di campo (esperti ambientali, biologi, epidemiologi e clinici), in una cornice protesa a collegare dati disparati in una logica di insieme coerente. Si tratta di un compito non facile, che richiede non solo lo sforzo di molti ricercatori con competenze complementari (biologi, medici, epidemiologi, analisti numerici, sistemisti, statistici), ma che deve anche fare i conti con le limitazioni dovute alla mancata disponibilità di dati talvolta cruciali, un fenomeno purtroppo frequente nelle indagini su sistemi complessi. Le pagine che seguono si propongono di illustrare, in modo comprensibile anche per non specialisti, alcuni di questi temi. Il capitolo comprende una panoramica su cosa sono i modelli statici e dinamici, ed in particolare quelli sviluppati in ambito “ambiente e salute”. Inoltre viene offerta al lettore una scheda riassuntiva del sistema formalizzato BioMatLab (MoSpec) dedicato all’implementazione dei modelli matematici in diversi linguaggi di programmazione, corredato da un link alla piattaforma online nella quale sono rese disponibili alla comunità scientifica alcuni modelli prodotti/implementati per lo studio delle dinamiche di interazione ambiente e salute sviluppate durante le attività del progetto CISAS (capitolo 14).

Hemorrhagic shock is a form of hypovolemic shock determined by rapid and large loss of intravascular blood volume and represents the first cause of death in the world, whether on the battlefield or in civilian traumatology. For this, the ability to prevent hemorrhagic shock remains one of the greatest challenges in the medical and engineering fields. The use of mathematical models of the cardiocirculatory system has improved the capacity, on one hand, to predict the risk of hemorrhagic shock and, on the other, to determine efficient treatment strategies. In this paper, a comparison between two mathematical models that simulate several hemorrhagic scenarios is presented. The models considered are the Guyton and the Zenker model. In the vast panorama of existing cardiovascular mathematical models, we decided to compare these two models because they seem to be at the extremes as regards the complexity and the detail of information that they analyze. The Guyton model is a complex and highly structured model that represents a milestone in the study of the cardiovascular system; the Zenker model is a more recent one, developed in 2007, that is relatively simple and easy to implement. The comparison between the two models offers new prospects for the improvement of mathematical models of the cardiovascular system that may prove more effective in the study of hemorrhagic shock.

Free Space Optics (FSO) links are affected by several impairments: optical turbulence, scattering, absorption, and pointing. In particular, atmospheric optical turbulence generates optical power fluctuations at the receiver that can degrade communications with fading events, especially in high data rate links. Innovative solutions require an improvement of FSO link performances, together with testing models and appropriate channel codes. In this paper, we describe a high-resolution time-correlated channel model able to predict random temporal fluctuations of optical signal irradiance caused by optical turbulence. Concerning the same channel, we also report simulation results on the error mitigation performance of Luby Transform, Raptor, and RaptorQ codes.

We report on the design, development and operation of a portable, low cost, battery-operated, multi-channel, functional Near Infrared Spectroscopy embedded system, hosting up to 64 optical sources and 128 Silicon PhotoMultiplier optical detectors. The system is realized as a scalable architecture, whose elementary leaf consists of a probe board provided with 16 SiPMs, 4 couples of bi-color LED, and a temperature sensor, built on a flexible stand. The hardware structure is very versatile because it is possible to handle both the switching time of the LED and the acquisition of the photodetectors, via an ARM based microcontroller.

In this study, the authors present the measurements performed on a free space optics (FSO) communications link using an indoor atmospheric chamber. In particular, the authors have generated several different optical turbulence conditions, demonstrating how even the weak turbulence regime can strongly affect the FSO link performance. The authors have carried out an in-depth analysis of the data collected during the measurements, and calculated the turbulence strength (i.e. scintillation index and Rytov variance) and the important performance metrics (i.e. the Q-factor and bit error rate) to evaluate the FSO link quality. Moreover, the authors have tested, for the first time, an appositely developed temporally-correlated gamma-gamma channel model to generate the temporal irradiance fluctuations observed at the receiver. This has been accomplished by using a complete analysis tool that enables the authors to fully simulate the experimental FSO link. Finally, the authors compare the generated time-series with the collected experimental data, showing a good agreement and thus proving the effectiveness of the model., This work was supported by the European Space Agency under grant no. 5401001020. We are very grateful to Dr. E. Armandillo for enlightening discussions. J. Perez's work was support by Spanish MINECO Juan de la Cierva Fellowship JCI-2012-14805. This research project falls within the frame of COST ICT Action IC1101 - Optical Wireless Communications - An Emerging Technology (OPTICWISE).

Noise through its interaction with the nonlinearity of the living systems can give rise to counter-intuitive phenomena. In this paper we shortly review noise induced effects in different ecosystems, in which two populations compete for the same resources. We also present new results on spatial patterns of two populations, while modeling real distributions of anchovies and sardines. The transient dynamics of these ecosystems are analyzed through generalized Lotka-Volterra equations in the presence of multiplicative noise, which models the interaction between the species and the environment. We find noise induced phenomena such as quasi-deterministic oscillations, stochastic resonance, noise delayed extinction, and noise induced pattern formation. In addition, our theoretical results are validated with experimental findings. Specifically the results, obtained by a coupled map lattice model, well reproduce the spatial distributions of anchovies and sardines, observed in a marine ecosystem. Moreover, the experimental dynamical behavior of two competing bacterial populations in a meat product and the probability distribution at long times of one of them are well reproduced by a stochastic microbial predictive model., Comment: 23 pages, 8 figures; to be published in Math. Model. Nat. Phenom. (2016)

We demonstrate an innovative CIGS-based solar cells model with a graded doping concentration absorber profile, capable of achieving high efficiency values. In detail, we start with an in-depth discussion concerning the parametrical study of conventional CIGS solar cells structures. We have used the wxAMPS software in order to numerically simulate cell electrical behaviour. By means of simulations, we have studied the variation of relevant physical and chemical parameters-characteristic of such devices-with changing energy gap and doping density of the absorber layer. Our results show that, in uniform CIGS cell, the efficiency, the open circuit voltage, and short circuit current heavily depend on CIGS band gap. Our numerical analysis highlights that the band gap value of 1.40 eV is optimal, but both the presence of Molybdenum back contact and the high carrier recombination near the junction noticeably reduce the crucial electrical parameters. For the above-mentioned reasons, we have demonstrated that the efficiency obtained by conventional CIGS cells is lower if compared to the values reached by our proposed graded carrier concentration profile structures (up to 21%). © 2015 Antonino Parisi et al.

In this manuscript, a Geostationary satellite-toground Free Space Optics (FSO) downlink channel model has been implemented, which is able to predict temporal irradiance fluctuations caused by scintillation at a wide range of turbulence conditions and for different values of the zenith angle. In order to mitigate fading events that occur in FSO communications, we have also tested the performance of three different families of Rateless Codes (Luby Transform, Raptor and RaptorQ) into our model and found that RaptorQ is the best candidate to mitigate errors in FSO links. Keywords— Optical Wireless Communications; Space-toGround FSO links, time-series, rateless codes; fading mitigation

A design and implementation of a portable functional Near InfraRed Spectroscopy embedded system prototype is described. In this theoretical and experimental work, we present an embedded system hosting 64 LED sources and 128 Silicon PhotoMultiplier detectors (SiPM). The elementary part of the structure is a flexible probe “leaf” consisting of 16 SiPMs, 4 couples of LEDs, each operating at two wavelengths, and a temperature sensor. The hardware system is based on an ARM main microcontroller that allows to perform both the switching time of LEDs and the acquisition of the SiPM outputs. The performed preliminary experimental tests achieved very promising results, thus demonstrating the effectiveness of our fNIRS system.

Free Space Optics (FSO) systems present some important advantages if compared to Radio Frequency links, but they can be affected by several impairments that degrade the link quality and availability. In particular, due to temporary interruptions of the line-of-sight condition between the transmitter and the receiver, packet loss can occur during data transmission. In this work, we present an indoor Free Space Optics link, in which we have systematically generated interruptions of the beam. We demonstrate how the application of the most recent rateless codes, i.e., RaptorQ codes, can strongly improve the link quality by reducing packet loss. In particular, results show that the Packet Error Rate greatly decreases when employing RaptorQ codes. Finally, by choosing the most suitable encoding/decoding parameters, we can correctly recover all the lost packets, ensuring an error-free operation.

In this work, we are reporting results on the electrodeposition of the CuInSe 2 thin films on molybdenum thin foil substrates. We have used an aqueous non-buffered electrolyte and a careful choice of deposition parameters to ensure a good quality and composition of the deposited films. In addition, CdS was replaced in the buffer layer with a wider bandgap Zn(S,O,OH) film obtained by chemical bath deposition. The deposited films were annealed in inert atmosphere at different temperatures. The influence of annealing temperature on the properties of the films is briefly discussed. Films were also characterized by photoelectrochemical and I-V measurements. Structural characterization was carried out by XRD and Raman spectroscopy. Results show the growth of good quality films with very uniform morphology and good chemical composition.

We report on the design and the electro-optical characterization of new classes of 4H-SiC Schottky UV detectors, fabricated employing Ni 2 Si interdigitated strips. We have measured, in dark conditions, the forward and reverse I-V characteristics as a function of temperature and C-V characteristics. Responsivity measurements of the devices, as function of wavelength in the UV range, of package temperature and of applied reverse bias are reported. We also compared devices featuring different strip pitch sizes, discussing their performances, and found the device exhibiting best results.

We report on backward second-harmonic generation using ps laser pulses in congruent lithium niobate with 3.2 µm periodic poling. Three resonant peaks were measured between 1530 and 1730 nm, corresponding to 16th, 17th and 18th quasi-phase-matching orders in the backward configuration, with a conversion efficiency of 4.75 x 10(-5%)/W for the 16th order. We could also discriminate the contributions from inverted domains randomized in duty-cycle.

We report on the design and the electro-optical characterization of a novel class of 4H-SiC vertical Schottky UV detectors, based on the pinch-off surface effect and obtained employing Ni2Si interdigitated strips. We have measured, in dark conditions, the forward and reverse I–V characteristics as a function of the temperature and the C–V characteristics. Responsivity measurements of the devices, as a function of the wavelength (in the 200 – 400 nm range), of the package temperature and of the applied reverse bias are reported. We compared devices featured by different strip pitch size, and found that the 10 μm device pitch exhibits the best results, being the best compromise in terms of full depletion and space-strip width ratio.

We performed a Signal to Noise Ratio characterization, in the continuous wave regime, at different bias voltages, frequencies and temperatures, on a novel class of silicon photomultipliers fabricated in planar technology on silicon p-type substrate. Signal to Noise Ratio has been measured as the ratio of the photogenerated current, filtered and averaged by a lock-in amplifier, and the Root Mean Square deviation of the overall current flowing to the device. The measured noise takes into account the shot noise, resulting from the photocurrent and the dark current. We have also performed a comparison between our SiPMs and a photomultiplier tube in terms of Signal to Noise Ratio, as a function of the temperature of the SiPM package and at different bias voltages. Furthermore, Excess Noise Factor measurements of the SiPM, as a function of the applied bias, are shown and discussed. Our results show the outstanding performance of this novel class of SiPMs even without the need of any cooling system.

 Abstract— We report on Signal-to-Noise Ratio measurements carried out, in the continuous wave regime, at different bias voltages, frequencies and temperatures, on a class of silicon photomultipliers fabricated in planar technology on silicon p- type substrate. Signal-to-Noise Ratio has been measured as the ratio of the photogenerated current, filtered and averaged by a lock-in amplifier, and the Root Mean Square deviation of the same current. The measured noise takes into account the shot noise, resulting from the photocurrent and the dark current. We have also performed a comparison between our SiPMs and a photomultiplier tube in terms of Signal-to-Noise Ratio, as a function of the temperature of the SiPM package and at different bias voltages. Our results show the outstanding performance of this class of SiPMs even without the need of any cooling system.

In this paper, a numerical analysis of relevant electrical parameters of multilayer structures for CIGS-based solar cells was carried out, employing the simulation software wxAMPS. In particular, we have focused on thin film cells having a ZnO:Al/ZnO/CdS/CIGS structure with a Molybdenum back contact. The aim of this work is to establish good theoretical reference values for an ongoing experimental activity, where our technology of choice is the single-step electrodeposition. In detail, we have analyzed how the main electrical properties change with the bang gap and the thickness of the absorber layer, for such a type of solar cell structure. Our results show that both efficiency and fill factor strongly depend on the energy gap. Instead, the absorber thickness plays a role up to a few microns, after which the cell parameters remain almost constant. As expected, the theoretical peak efficiency was found for a band gap value of 1.40 eV, corresponding to a Ga/(In+Ga) ratio of 0.66.

In this work, we have implemented a data recovery software integrating the most recent rateless codes, i.e., RaptorQ codes. Thanks to the above-mentioned software, it is possible to recover data loss occurring on several kinds of network conditions. We have performed a statistical analysis of failure probabilities at several configurations of RaptorQ parameters. We have found a good agreement with the theoretical values of a random linear fountain code over Galois Field GF(256). Moreover, we have shown that the probability of having a certain number of failed decoded source blocks - when sending a fixed size file - follows a Poisson distribution.

This paper analyzes how the electrical characteristics of a CIGS photovoltaic module are affected by the chemical composition and by the thickness variations of the CIGS absorber. The electrical characteristics here considered are the short circuit current, the open circuit voltage, the efficiency and the power peak. The chemical composition is varied by tuning the ratio between gallium and indium. This analysis has been performed by means of the wxAMPS software, developed by the University of Illinois. The above variations have been taken into account on a PV module made of 72 cells. This analysis has been carried out employing a PV module mathematical model developed and implemented by the Authors in Matlab environment.

Free Space Optics (FSO) links are affected by several impairments and, among them, optical turbulence is the most important factor that can degrade the link quality. Due to the presence of this phenomenon, the signal irradiance detected by the receiver fluctuates, thus causing erasure errors and fading events. In this work, we present an indoor Free Space Optics link, in which several turbulence conditions are generated by using two heating elements. We show that the generated turbulence causes erasure errors and packet losses during the data transmission, and we also compare the statistical distribution of the samples with the theoretical models. Moreover, we demonstrate how the application of the most recent rateless codes, i.e., RaptorQ codes, can strongly improve the link quality. In particular, results show that the Packet Error Rate strongly decreases when employing RaptorQ codes. Finally, we conclude that, by properly setting the encoding/decoding parameters, we can correctly receive the whole transmitted data without any errors.

In this paper, we present the fabrication process steps and the characterization of 4H-SiC vertical Schottky UV detectors, where interdigitated strips, acting as top metal contacts, have been realized in $\hbox{Ni}_{2}\hbox{Si}$ . These devices exploit the pinch-off surface effect. $I$ – $V$ and $C$ – $V$ characteristics, as functions of temperature, were measured in dark conditions. In addition, we have carried out responsivity measurements, for wavelengths ranging from 200 to 400 nm, at varying package temperature and applied reverse bias. A comparison among devices having different strip pitch sizes has been performed, thus finding out that the 10- $\mu\hbox{m}$ pitch class demonstrates the top performances as regards the tradeoff between exposed surface area and complete merge of adjacent depleted regions under top contacts.

Functional Near Infrared Spectroscopy (fNIRS) uses near infrared sources and detectors to measure changes in absorption due to neurovascular dynamics in response to brain activation. The use of Silicon Photomultipliers (SiPMs) in a fNIRS system has been estimated potentially able to increase the spatial resolution. Dedicated SiPM sensors have been designed and fabricated by using an optimized process. Electrical and optical characterizations are presented. The design and implementation of a portable fNIRS embedded system, hosting up to 64 IR-LED sources and 128 SiPM sensors, has been carried out. The system has been based on a scalable architecture whose elementary leaf is a flexible board with 16 SiPMs and 4 couples of LEDs each operating at two wavelengths. An ARM based microcontroller has been joined with a multiplexing interface, able to control power supply for the LEDs and collect data from the SiPMs in a time-sharing fashion and with configurable temporal slots. The system will be validated by using a phantom made by materials of different scattering and absorption indices layered to mimic a human head. A preliminary characterization of the optical properties of the single material composing the phantom has been performed using the SiPM in the diffuse radial reflectance measurement technique. The first obtained results confirm the high sensitivity of such kind of detector in the detection of weak light signal even at large distance between the light source and the detector. © 2014 SPIE.

We describe our approach to the task of modelling, both at single cell structure and complete module levels, during the solar cell technology development process. This can give very helpful indications, in terms of global photovoltaic module characteristics, for the assessment of intermediate research results and planning of further experiments. We make reference specifically to the fabrication of thin film CIGS solar cells by means of single-step electrodeposition, a technique which appears fairly easy and low-cost but, at the same time, can lead to quite different structural and electrical properties.

Starting from the results regarding a nonvacuum technique to fabricate CIGS thin films for solar cells by means of single-step electrodeposition, we focus on the methodological problems of modeling at cell structure and photovoltaic module levels. As a matter of fact, electrodeposition is known as a practical alternative to costly vacuum-based technologies for semiconductor processing in the photovoltaic device sector, but it can lead to quite different structural and electrical properties. For this reason, a greater effort is required to ensure that the perspectives of the electrical engineer and the material scientist are given an opportunity for a closer comparison and a common language. Derived parameters from ongoing experiments have been used for simulation with the different approaches, in order to develop a set of tools which can be used to put together modeling both at single cell structure and complete module levels.

We report on bulk and guided-wave second-harmonic generation via random Quasi-Phase-Matching in Lithium Tantalate. By acquiring the far-field profiles at several wavelengths, we extract statistical information on the distribution of the quadratic nonlinearity as well as its average period, both at the surface and in the bulk of the sample. By investigating the distribution in the two regions we demonstrate a non-invasive approach to the study of poling dynamics.

Free Space Optics (FSO) links are affected by several impairments: optical turbulence, scattering, absorption, and pointing. In particular, atmospheric optical turbulence generates optical power fluctuations at the receiver that can degrade communications with fading events, especially, in high data rate links. A way to mitigate FSO link outages can be to add a coding to communications. Nevertheless, in order to study innovative solutions (software or hardware) and to improve the FSO link performance it needs accurate testing models. In this paper we describe an accurate time-correlated channel model able to predict random temporal fluctuations of optical signal irradiance caused by optical turbulence. Moreover, concerning the same channel, we also report simulation results on the error mitigation performance of Luby-Transform, Raptor, and RaptorQ codes.

We analyse the effects of environmental noise in three different biological systems: (i) mating behaviour of individuals of 'Nezara viridula' (L.) (Heteroptera Pentatomidae); (ii) polymer translocation in crowded solution; (iii) an ecosystem described by a Verhulst model with a multiplicative Lèvy noise. Specifically, we report on experiments on the behavioural response of 'N. viridula' individuals to sub-threshold deterministic signals in the presence of noise. We analyse the insect response by directionality tests performed on a group of male individuals at different noise intensities. The percentage of insects which react to the sub-threshold signal shows a non-monotonic behavior, characterized by the presence of a maximum, for increasing values of the noise intensity. This is the signature of the non-dynamical stochastic resonance phenomenon. By using a "hard" threshold model we find that the maximum of the signal-to-noise ratio occurs in the same range of noise intensity values for which the behavioral activation shows a maximum. In the second system, the noise driven translocation of short polymers in crowded solutions is analyzed. An improved version of the Rouse model for a flexible polymer has been adopted to mimic the molecular dynamics, by taking into account both the interactions between adjacent monomers and introducing a Lennard-Jones potential between non-adjacent beads. A bending recoil torque has also been included in our model. The polymer dynamics is simulated in a two-dimensional domain by numerically solving the Langevin equations of motion. Thermal fluctuations are taken into account by introducing a Gaussian uncorrelated noise. The mean first translocation time of the polymer center of inertia shows a minimum as a function of the frequency of the oscillating forcing field. In the third ecosystem, the transient dynamics of the Verhulst model perturbed by arbitrary non-Gaussian white noise is investigated. Based on the infinitely divisible distribution of the Lèvy process we study the nonlinear relaxation of the population density for three cases of white non-Gaussian noise: (i) shot noise, (ii) noise with a probability density of increments expressed in terms of Gamma function, and (iii) Cauchy stable noise. We obtain exact results for the probability distribution of the population density in all cases, and for Cauchy stable noise the exact expression of the nonlinear relaxation time is derived. Moreover starting from an initial delta function distribution, we find a transition induced by the multiplicative Lèvy noise, from a trimodal probability distribution to a bimodal probability distribution in asymptotics. Finally we find a nonmonotonic behavior of the nonlinear relaxation time as a function of the Cauchy stable noise intensity.

We report on recent technological improvements concerning nonlinear patterning of lithium niobate and lithium tantalate in the micrometer and submicrometer scales using surface periodic poling for ferroelectric domain inversion. The fabricated samples were employed for frequency doubling via quasiphase-matching both in bulk and guided wave geometries, including forward and backward configurations and wavelength conversion in bands C and L. We also investigated short-period quasiperiodic samples with randomly distributed mark-to-space ratios.

A report is presented on broadband second-harmonic generation in the range between 930 and 970 nm using random quasi-phase matching in a planar waveguide fabricated by soft proton exchange in congruent lithium tantalate. Bulk and waveguide measurements are compared, outlining the averaging role of guided-wave modes and their interactions with respect to spectral acceptance and near-field profile.

We report on backward second-harmonic-generation in bulk periodically poled congruent lithium niobate with a 3.2 microns period. A tunable continuous-wave Ti:sapphire laser allowed us exciting two resonant quasi-phase-matching orders in the backward configuration. The resonances were also resolved by temperature tuning and interpolated with standard theory to extract relevant information on the sample.

We report on stable optical waveguides fabricated by soft-proton exchange in periodically-poled congruent lithium tantalate in the a-phase. The channel waveguides are characterized in the telecom wavelength range in terms of both linear properties and frequency doubling. The measurements yield a nonlinear coefficient of about 9.5pm/V, demonstrating that the nonlinear optical properties of lithium tantalate are left nearly unaltered by the process. (C) 2010 Optical Society of America

We report the characterization of single-mode optical waveguides at telecom wavelength, realized in congruent lithium-tantalate. We demonstrate that waveguides realized by proton-exchange show a nonlinear coefficient matching that expected in a bulk crystal.

A frequency shifting device is fabricated and tested in a ferroelectric waveguide in a low-photorefractivity crystal. Periodic poling for quasi-phase-matching and channels for operation in the near-infrared C-band were obtained in congruent lithium tantalate, demonstrating for the first time both wave confinement and two-stage parametric conversion in such waveguides.

Domain engineering technology in lithium tantalate is a well studied approach for nonlinear optical applications. However, for several cases of interest, the realization of short period structures (< 2 ��m) is required, which make their characterization difficult with standard techniques. In this work, we show that high resolution x-ray diffraction is a convenient approach for the characterization of such structures, allowing us to obtain in a nondestructive fashion information such as the average domain period, the domain wall inclination, and the overall structure quality.