Search

Background. This study evaluated the gingival crevicular fluid (GCF) and Peri- implant crevicular fluid (PICF) concentrations of interleukin-1 beta (IL-1β), interleukin-6 (IL-6), tumor necrosis factor-alpha (TNF-α) and active metalloproteinase-8 (a-MMP-8) in sites with healthy conditions vs. sites affected by periodontitis (PER) and peri-implantitis (PIM). Methods. Periodontally healthy (PH) sites with PER, sites with peri-implant health (PIH), and sites with PIM were investigated intra-individually, according to the inclusion criteria of each group. Probing pocket depth (PPD), plaque index, gingival index, and the presence or absence of bleeding on probing (BoP) were evaluated. In GCF and PICF samples, IL-1β, IL-6, and TNF-α were quantified by ELISA Duoset® kit in combination with Ultramark® micro-ELISA digital reader; a-MMP8 concentration was analyzed by a chairside test (Perio/ImplantSafe®) in combination with a digital reader (ORALyzer®). Results. The concentrations of IL-6 and IL-1β, TNF-α, and a-MMP-8 were significantly higher in the PIM and PER sites compared to healthy sites (P0.05). Conclusion. aMMP-8, IL-6, IL-1β, and TNF-α presented higher GCF/PICF concentrations in diseased periodontal and peri-implant sites. However, only the concentrations of IL-1β and a-MMP-8 were significantly higher in PIM than in PER sites.

Endodontic treatments are performed to avoid extractions and maintain the natural dentition. Root canal treatments are undertaken to eliminate or prevent an infection within the root canal system. Chemical and mechanical root canal debridement are the main methods used in endodontics to remove necrotic tissue, microorganisms, and microbial byproducts from the canal. However, to date there is no objective method to clinically determine the proper root canal disinfection level and thus proceed with the obturation. Clinicians just rely on their experience and habits or can trust in empirical methods such as the insertion of paper cones inside the canal and then check their appearance after the removal. Even in the in vitro and ex vivo scientific studies there is no objective method to analyze and compare the efficacy of different endodontic chemo-mechanical techniques and materials. The most frequently used method is to visually analyze some areas with a scanning electron microscope (SEM), even if the resulting images are hardly quantifiable and could greatly vary according to the analyzed area. A new device to clinically test the cleanliness of a root canal and display the result in an objective score was recently developed. The device analyzes the luminescence generated by an enzyme cycling method that process the adenosine triphosphate (ATP), adenosine diphosphate (ADP) and adenosine monophosphate (AMP) present in organic residues. The aim of the present in vitro study was to test the efficacy and reliability of this novel device (Endocator) in a controlled in vitro environment, before using it in clinical practice. The device sensitivity was tested on 5 single canal resin blocks. Three consecutive sampling were executed by one operator for each block to test the device repeatability. Results were recorded according to Endoscore (ES) and relative light unit (RLU) scales. Descriptive analysis and comparison between the 5 resin blocks and the 3 consecutive sampling were performed. Only the comparison between the first and third measurements both for ES (p = 0.00115999) and RLU (p = 0.00532749) resulted significant. Endocator was able to determine small variations of canal contamination in a controlled laboratory environment, showing high sensitivity and repeatability.

Aim: The study was to evaluate the active matrix metalloproteinase-8 (aMMP-8) concentration in gingival crevicular fluid (GCF) and in peri-implant sulcular fluid (PISF) in healthy and diseased conditions, before and after non-surgical treatment, and to compare it with the various clinical parameters used to estimate the gingival and peri-implant inflammation. Methods: Plaque index/modified PI (PI/mPI), gingival index/simplified GI (GI/sGI), probing depth (PD), bleeding on probing index/modified BOPI (BOPI/mBOPI), radiographic bone loss/radiographic marginal bone loss (rBL/rMBL), and GCF/PISF samples were evaluated, before and 3 months after non-surgical treatment, GCF/PISF samples were analyzed by a chair-side mouth-rinse test (ImplantSafe®) in combination with a digital reader (ORALyzer®). Results: In all groups, aMMP-8 median levels were statistically higher in the PISF than in GCF and they did not change after treatment. Moreover, it was statistically higher in Group 3 (periodontitis/peri-implantitis) compared to the other groups. A positive correlation of the GCF/PISF and aMMP-8 median concentration was seen with increasing PD and BOPI/mBOPI values. A higher covariation of aMMP-8 mean levels in GCF with PD was found when compared to PISF levels. aMMP-8 mean levels in PISF expressed a higher covariation with increasing grades of sGI, rMBL, and BOPI while aMMP-8 GCF concentration established a better covariation with PD and PI. Conclusions: PISF of sites with peri-implant mucositis and peri-implantitis showed higher levels of aMMP-8 compared to sites with gingivitis and periodontitis. Compared to clinical indices, aMMP-8 concentration in GCF/PISF can be a beneficial adjunctive diagnostic tool for early identification and screening of the risk of peri-implant diseases. After non-surgical therapy, PISF aMMP-8 concentration remained mostly unchanged, while the GCF concentration of aMMP-8 significantly decreased.

Hypochlorous acid is the most effective disinfectant in the chlorine family available in dilute solution. The present narrative review investigates the advantages of using Hypoclorous acid for the disinfection of dental setting, aiming to reduce the risk of contamination and cross infections. The use of HOCl has been also investigated during the pandemic period of Covid-19 and possible usage of this well-known disinfectant as valuable device for virus charge reduction is described. HOCl is considered useful in the disinfection of water lines, surfaces and dental devices, and also to reduce the risk of airborne infections if sprayed in the environment of the dental setting, especially when the target is a capsized virus. HOCl is characterized by reasonably low costs, easy management and multiple purposes that could encourage dentists to incorporate the use of novel hypochlorous acid solutions, hydrogels or sprays in their practice. Since there are many possible uses of HOCl in dentistry, further investigations are necessary to comprehend and evaluate the effectiveness of HOCl in the different dental office’s situations and settings.

ABSTRACTBackground The oral microbiome is a complex and dynamic assemblage of microorganisms that colonize different sites of the oral cavity maintaining both oral and systemic health. Therefore, when its composition is altered, oral diseases occur. Among oral inflammatory pathologies, periodontal diseases affect the tissues surrounding the teeth, representing the main cause of tooth loss and one of the most important threats to the oral health. Lifestyle and eating habits influence the composition of the human oral microbiota and the development and progression of oral diseases. In this context, the Mediterranean Diet (MD) model, comprising both healthy dietary choices and lifestyle, is linked to the prevention of several metabolic and chronic-degenerative pathological processes, including oral diseases. Indeed, the MD is a plant-based diet, enriched of anti-inflammatory and antioxidant nutrients, which may induce beneficial effects against dental caries and periodontal diseases.Aim This review summarizes the role of the oral microbiome in the development of the oral diseases and the potential of MD in modulating the oral microbiome leading to implications for oral health.Conclusions The data collected highlight the need to promote the MD pattern along with the correct hygiene habits to prevent the development of oral diseases.

Objectives: Understanding the shape and size of the sella turcica may help predict future orthodontic treatment needs related to skeletal malocclusion. This study aims to assess different morphological types of the sella turcica in lateral cephalometric radiographs and its correlation with malocclusion, as well as the relationship between gender and linear measurements of sella turcica. Materials and Methods: The lateral cephalometric radiographs of 410 volunteers (111 men and 299 women) aged 8 to 30 years were evaluated. The patients were divided into three groups based on their skeletal growth patterns (cl I, II, and III). Then the anatomical shape and linear dimensions of sella turcica were assessed. Measurements were made using Adobe Photoshop Version: 20.0.0 software, and data analysis was performed by IBM SPSS Statistics version 25. Results: The following morphologies were observed: normal (37.8%), oblique anterior wall (9.3%), double contour of the floor (21.5%), sella turcica bridge (8.8%), irregularity (notching) in the posterior part of sella turcica (16.6%), and pyramidal shape of the dorsum sellae (6.1%). No statistically significant relationship was found between sella turcica variations and skeletal malocclusion. The correlation between female sex with the diameter (p=0.027) and depth values (p=0.035) of sella turcica was statistically significant. There was no statistically significant difference (p>0.05) in length based on gender. Conclusion: The most morphological type reported was normal sella turcica (37.8%). Anatomical variations of sella turcica had no association with malocclusion. The most considerable depth and diameter of sella turcica were found in women.

This Systematic Review (SR) was to report on the prevalence of pulp stones in the Saudi Arabian (KSA) population. The electronic databases were searched for scientific research articles during May 2021. The data search was performed in electronic search engines like PubMed, Scopus, Web of science, and Saudi Digital Library, and 6 original research articles which fulfilled the eligibility criteria were assessed for qualitative data. The prevalence of pulp stones among the KSA population ranged from 4.6% to 50.93% among the study participants and it ranged between 10.2%−13.34% in the teeth assessed. The pulp stones were more frequently reported in decayed teeth, periodontal diseases, attrition, teeth with dental restorations, and higher in the molar teeth in comparison with the premolar teeth. The data on the prevalence of pulp stones among the Saudi population will be helpful for clinicians in planning endodontic procedures.

This study investigated the marginal adaptation of three recently introduced bioceramic root repair materials, EdgeBioCeramic RetroFill, Endocem MTA, and One-Fil PT, using VP-SEM analysis. Extracted single-rooted lower incisors were used to simulate retrograde fillings. The results showed no statistically significant differences in the marginal gap between the materials and the dentin walls. All three materials exhibited good dimensional stability, with gap sizes comparable to previously published research on similar materials. The mean GAP was 3.91 ± 2.56 for EdgeBioCeramic RetroFill, 4.32 ± 2.69 for Endocem MTA, and 4.50 ± 2.54 for One-Fil PT. This study employed VP-SEM, a valuable tool for analyzing bioceramic materials without altering their properties. The findings suggest the possibility of daily clinical use of these bioceramics by endodontists and general practitioners that could find applications in retrograde fillings and perforation repairs. However, further in vivo studies are needed to confirm long-term stability and assess the influence of sample preparation methods.

Background This study aimed to assess the effect of premolar extraction and anchorage type for orthodontic space closure on upper airway dimensions and position of hyoid bone in adults by cephalometric assessment. Methods This retrospective study was conducted on 142 cephalograms of patients who underwent orthodontic treatment with premolar extraction in four groups of (I) 40 class I patients with bimaxillary protrusion and maximum anchorage, (II) 40 class I patients with moderate crowding and anchorage, (III) 40 class II patients with maximum anchorage, and (IV) 22 skeletal class III patients with maximum anchorage. The dimensions of the nasopharynx, velopharynx, oropharynx, and hypopharynx, and hyoid bone position were assessed on pre- and postoperative lateral cephalograms using AudaxCeph v6.1.4.3951 software. Data were analyzed by the Chi-square test, paired t-test, and Pearson’s correlation test (alpha = 0.05). Results A significant reduction in oropharyngeal, velopharyngeal, and hypopharyngeal airway dimensions was noted in groups I, III, and IV (P

The pushout bond strength of root fillings at radicular dentin was investigated employing NaOCl, CHX, and homoeopathic mother tincture (Arnica montana) as an irrigant. Sixty human permanent single-rooted extracted teeth were decoronated. The root canals were instrumented using Pro taper universal rotary system (Dentsply Tulsa Dental; Tulsa, Oklahoma) and were prepared up to F3 apical size. The roots were then randomly divided into three groups according to irrigation solution (n = 20) according to the final irrigation regimen: Group I: 3 mL 5.25% NaOCl followed by 3 mL Saline (control); Group II: 3 mL Arnica montana (10%, w/v) followed by 3 mL Saline; Group III: 3 mL CHX followed by 3 mL Saline. The canals were dried using paper points. The canals were coated with AH Plus sealer (Dentsply DeTey, Konstaz, Germany) with the aid of a Lentulo spiral (Dentsply DeTey, Konstaz, Germany) and obturated with #F3 gutta-percha. Each root was then horizontally sliced into three slices, labelled coronal, middle, and apical, each measuring 2 mm thick. Furthermore, at a crosshead speed of 2 mm/min, the test was carried out using the universal testing apparatus. The 5.25% NaOCl significantly decreased the bond strength of AH Plus to dentin. Both CHX and Arnica montana were capable of reversing the compromised pushout of AH Plus to NaOCl-treated dentin. After using NaOCl as an irrigant, the danger of diminished binding capacity of AH Plus to root canal walls arises. Final irrigation with Arnica montana and CHX reduces this risk.

Objectives: Due to the emphasis on the protective and antimicrobial role of Nitric Oxide against gas-trointestinal diseases, investigating its relationship with dental caries is a right topic. Therefore, this research has investigated the amount of saliva Nitric Oxide in different volumes of DMFT indicator in adults. Material and Methods: In this descriptive- analytical cross-sectional study, 80 participants (20-35 years old), without a history of systemic disease and drug use participated as research sam-ples, (53.8% of the participants in the study were women). Participants were selected from patients who had visited dental Department. The participants were divided in four groups based on DMFT (DMFT=0, 1≤DMFT≤3, 3

(1) Background: The overdenture is a complete denture, an implant-supported prosthesis, that the patient can remove at home for the usual oral hygiene procedures, thanks to a simple and intuitive anchoring system. Clinically, the execution of this rehabilitation for the lower arch is often favored, but when it is necessary to limit the extension of the palate in the upper arch, it can represent the least invasive and economic solution. The aim of the study is to analyze post-loading implant loss for implant-supported prostheses in the edentulous upper jaw. (2) Methods: This retrospective study was carried out on patients who received a superior overdenture on four implants for rehabilitation. A total of 42 patients were included in this study and initially evaluated clinically and radiographically. The follow-up period for patients after delivery of the upper overdenture is between 48 and 72 months. A total of 168 implants were inserted and monitored in this period. Clinical and radiographic tests were carried out on all 168 implants, with constant re-evaluation. (3) Results: The overall implant survival rate is 92.9%, a value that corresponds to those present in the literature in previously published studies. There were few prosthetic complications, mainly the detachment of anterior prosthetic teeth. (4) Conclusions: Most of these complete prostheses, which as antagonist had another previously made overdenture on four or on two implants, achieved excellent success rates in this study at 72 months.

Tooth eruption is a complex process, during which a series of factors can cause a failure of it. Among this, primary failure of eruption (PFE) is a non-syndromic condition that leads to an incomplete tooth eruption despite the presence of a clear eruption pathway. The aim of this narrative review is to provide an overall view about clinical considerations, genetics-related aspects, and possible treatments of PFE based on the latest findings. A literature search using the PubMed/Medline and Scopus database was performed. The search terms used were “PFE”, “orthodontics”, “primary failure of eruption”, and “treatment”, and all the articles, according to the inclusion criteria, from 2008 until June 2022 were screened. Among them, 12 articles were considered useful to highlight some of the main genotypical and phenotypical aspects and several treatment options. Indeed, if there is a suspicion of primary failure of eruption, a PTH1R screening should be performed, because a mutation in this gene is responsible for an altered balance between the resorptive and the appositional processes during the eruption. This is important to know before starting an orthodontic treatment because it could lead to ankylosis of the affected tooth, exposing patients to iatrogenic damage. Treatment options depend on the growth phase of the patient and on the clinical situation.

(1) The possibility of knowing information about the anatomy in advance, in particular the arrangement of the endodontic system, is crucial for successful treatment and for avoiding complications during endodontic therapy; the aim was to find a correlation between a minimally invasive and less stressful endodontic access on Ni-Ti rotary instruments, but which allows correct vision and identification of anatomical reference points, simplifying the typologies based on the shape of the pulp chamber in coronal three-dimensional exam views. (2) Based on the inclusion criteria, 104 maxillary molars (52 maxillary first molars and 52 maxillary second molars) were included in the study after 26 Cone Beam Computed Tomography (CBCT) acquisitions (from 15 males and 11 females). And linear measurements were taken with the CBCT-dedicated software for subsequent analysis. (3) The results of the present study show data similar to those already published about this topic. Pawar and Singh’s simplified classification actually seems to offer a schematic way of classification that includes almost all of the cases that have been analyzed. (4) The use of a diagnostic examination with a wide Field of View (FOV) and low radiation dose represents an exam capable of obtaining a lot of clinical information for endodontic treatment. Nevertheless, the endodontic anatomy of the upper second molar represents a major challenge for the clinician due to its complexity both in canal shape and in ramification.

Background: Tobacco use by youth is ever-demanding, and it is increasingly distributed not only in India but also globally. Saliva is a complex oral bio-fluid, freely available, performing absolute tasks for maintaining oral health and homeostasis. It contains a plethora of significant constituents such as proline-rich proteins (PRPs), immunoglobulins, IgA, enzymes lysozyme, lactoferrin, peroxidases, amylase, etc. The basic ecological balance of the oral cavity is stabilized via salivary clearance by reduced aggregation and adherence of microorganisms by direct microbial activity. This balance of oral activity is also done by indirect mechanisms by immunological as well as non-immunological means and also by effectively regulating salivary pH flow rate. This institutional observational study was planned to assess and compare salivary parameters (pH, salivary flow rate), total proteins, α-amylase, calcium, phosphate, and IgA, of unstimulated whole saliva of both tobacco abusers and tobacco non-users. Methods: The Study consisted of 270 participants (Tobacco habit) group, n = 135 and Control (Healthy) group, n = 135 and were in the age range of 20–50 years. They were assessed for oral health status, followed by the analysis of salivary pH, flow rate, total proteins, amylase, calcium, phosphates, and IgA of unstimulated whole saliva. Results: Comparative evaluation of salivary parameters among groups found that varying tobacco abusers had increased salivary amylase, protein levels, and phosphate whereas decreased salivary pH, flow rate, IgA, and in the whole unstimulated saliva samples than those of non-tobacco users. This difference among groups was statistically significant. (p < 0.05), and calcium levels were not altered significantly. Conclusions: This study concludes that salivary parameters are altered in tobacco abusers when compared to those of non-abusers, and it was more significant in smokeless tobacco abusers than in any other form of tobacco abuse.

This study aimed to assess the relationship of the morphology and size of the sella turcica (ST) with dental anomalies and skeletal malocclusions. This cross-sectional study was conducted on records of fixed orthodontic patients treated between 2013 and 2022. Cephalometric analysis was performed to determine the anteroposterior and vertical skeletal patterns. Preoperative panoramic radiographs and lateral cephalograms, intraoral photographs, and primary dental casts of patients were used to detect dental anomalies. Gender, sagittal and vertical skeletal patterns, dental anomalies, and dimensions (length, depth, and diameter), and morphology of the ST were all recorded according to the lateral cephalograms of patients. Data were analyzed using independent t-test, one-way and two-way ANOVA, Chi-square test, and log rank test (alpha = 0.05). The depth and diameter of the ST had no significant correlation with gender (p > 0.05); however, the length of the ST was significantly longer in males than females (p < 0.05). The morphology of the ST had a significant correlation with gender (p < 0.05). The ST morphology had a significant correlation with the anteroposterior skeletal pattern, microdontia, and tooth impaction as well (p < 0.05). The present results revealed a significant correlation of the ST morphology with the anteroposterior skeletal pattern, microdontia, and tooth impaction.

Objective: Effective tools and methods are applied during root canal retreatment to eliminate root canal obturation materials and preserve the initial root canal anatomy. The present study compared the efficacy of Reciproc, Neoniti, ProTaper, and Hedstrom files in the retreatment of curved root canals. Material and methods: In the present in vitro study, 100 root canals with 25‒45º curvatures were used. After the samples were initially prepared and examined by CBCT, the root canals were obturated with gutta-percha and randomly assigned to four groups (n=25). A retreatment was carried out in each group with NeoNiTi, ProTaper, Reciproc, and Hedstrom files. CBCT examinations were carried out again under the same conditions. The samples were evaluated at 3-, 6-, and 9-mm distances from the apex on the first and the second CBCT image for root canal transportation and remaining gutta-percha in the root canals. The time required for retreating each canal in each sample was recorded. One-way ANOVA and corresponding non-parametric tests were applied for data analysis. Results: The root canal transportation in the NeoNiTi group was lower than that in the other groups and significantly different from the ProTaper group (P0.05). Conclusion: Despite the fact that the NeoNiTi file produced less transportation than other file systems evaluated in the retreatment of curved root canals, all the files were very effective at the clinically acceptable levels.

Previous studies assessed the involvement and impact of periodontal bacteria in preeclamptic women with chronic periodontitis. To explore further, the current study aimed to associate periodontal viruses and bacteria with mir155 levels in placental tissues of preeclamptic women with generalized chronic periodontitis. Four-hundred 45 pregnant women, 18–35 years of age, were selected and divided into four groups (controls, A, B, and C) where the Controls included 145 systemically and periodontally healthy pregnant women Group A-100 systemically healthy pregnant women with chronic periodontitis, Group B- 100 preeclamptic women with chronic periodontitis, Group C- 100 preeclamptic women without chronic periodontitis. Age, BMI, SES, and periodontal parameters such as PI, BOP, PPD, and CAL were noted. Periodontal pathogens such as Tf, Td, Pg, Pi, Fn, HSV, EBV, and HCMV were tested in subgingival plaque, placental tissues, and mir155. We observed that PI, BOP, PPD, CAL, Tf, and EBV were highly significant in Group B. We found a higher number of periodontal bacteria, viruses, and mir 155 in Group B showing a higher risk of preeclampsia. More genetic studies in this field are advised to ascertain the role of periodontopathogens and mir 155 in preeclampsia and periodontal inflammation. What is already known on this subject? Periodontal diseases pose an increased risk of developing preeclampsia and delivering preterm and/or low-birth-weight babies. What do the results of this study add? Periodontal variables such as PI, pocket depth, BOP, and clinical attachment levels, were found to be increased in the preeclamptic women with chronic periodontitis. The significant difference was seen in the relative fold expression of mir155 with higher gene expression of mir155 in groups B and A as compared to group C and controls. What are the implications of these findings for clinical practice and/or further research? In our study, mir155 correlation with the periodontal parameters and periodontal pathogens further strengthen the evidence of periodontal inflammation as a risk of preeclampsia in pregnant women especially when associated with chronic periodontitis. mir155 can be considered to be one of the genetic biomarkers and can be used as a diagnostic tool for the early detection of PE.

(1) Objective: To review the criteria proposed by Cerero-Lapiedra et al. and to retrospectively identify the under-diagnosed disease in patients diagnosed with proliferative verrucous leukoplakia. (2) Materials and methods: In this study, we included patients who were diagnosed with leukoplakia (histological label consistent with the clinical diagnosis, n = 95), and cases with a final diagnosis within the spectrum of proliferative verrucous leukoplakia (n = 110) as defined by Batsakis et al. We applied the criteria proposed by Cerero-Lepiedra et al. to screen for the possible cases of proliferative verrucous leukoplakia. (3) Results: Although many of our patients satisfied specific isolated criteria, only 11 cases satisfied specific combinations of the guidelines to satisfy a diagnosis of proliferative verrucous leukoplakia. However, due to the lack of follow-up data, the disease is not confirmed in these 11 cases. (4) Conclusion: A limited number of cases of proliferative verrucous leukoplakia were diagnosed using the criteria given by Cerero-Lapiedra et al. The true natural history of the disease could not be studied due to the lack of follow-up data. (5) Clinical relevance: Proliferative verrucous leukoplakia presenting as hyperkeratosis or mild epithelial dysplasia are often not followed up, and they subsequently transform into carcinoma. Thus, clinicians must be vigilant whenever they encounter leukoplakia, especially with multifocal presentations. In such cases, the follow-up data are the key to understanding the true nature of the disease entity.

During the last two decades, the field of the nickel–titanium (NiTi) rotary instruments has been thoroughly changed by the latest, exciting innovations in both manufacturing technologies and the knowledge of their mechanical performance [...]

Abstract Background Repeated removal and replacement of healing abutments result in frequent injuries to the soft tissues. Purpose The purpose of this study was to evaluate the effect of disconnection/reconnection of laser microgrooved vs. machined healing and prosthetic abutments on clinical periodontal parameters, marginal bone levels, and proinflammatory cytokine levels around dental implants. Material and methods Twenty-four patients each received 2 implants with one-stage protocol in a split-mouth design on the same jaw. In each patient, one healing and prosthetic abutments with a laser microgrooved surface (LMS group) and one healing and prosthetic abutments with machined surface (MS group) were used. Four months following implant placement (T0), the healing abutments were disconnnected and reconnected three times to carry out the impression procedures and metal framework try-in. Four weeks later (T1), definitive prosthetic abutments were installated with screw-retained crowns. Modified plaque index (mPI), modified gingival index (mGI) bleeding on probing (BOP), and probing depth (PD) were recorded at T0 and T1. At the same time points, samples for immunological analyses were taken from the sulcus around each implant. Peri-implant crevicular fluid (PICF) samples were analyzed for interleukin-1beta (IL-1β), interleukin-6 (IL-6), and tumor necrosis factor (TNF)-α levels using the ELISA kit. Results At T0 and T1, mPI and mGI showed no statistical difference between the two groups, while higher PD and BoP values were noted for the MS group (P < 0.05). The mean PICF volume and mean concentrations of IL-1β, IL-6, and (TNF)-α in the LMS group were statistically less than those in the MS group (P < 0.05). In addition, comparison of IL-6 and IL-1β mean concentrations at T0 and T1 in the MS group showed a statistically significant increase (p < 0.05) over time, which was not noted for the LMS. Conclusion Disconnection/reconnection of healing and prosthetic abutments with a laser-microgrooved surface resulted in less inflammatory molecular response compared with conventional machined ones. Trial registration ClinicalTrials.gov NCT04415801 , registered 03/06/2020

Cement-retained implant restorations still represents a widely used prosthetic solution today, considering the simple execution, the possibility of correcting the implant axis according to the dental axis and an extremely satisfactory aesthetic. The objective of the study is to evaluate whether resin-based cements are actually more aggressive towards the peri-implant tissue compared to zinc oxide cements. In the present study 18 patients (8 males and 10 females) were examined with a split-mouth design. The follow-up period for patients after delivery of the cement-retained single crown is a maximum of 48 months. A total of 36 implants were inserted and monitored during this period. Clinical and radiographic tests were carried out on all 36 implants, with constant re-evaluation, as well as the occurrence of some prosthetic or biological problems that brought the patient back to visit. The results for both cements were in line with the indications of the respective manufacturers. During the observational period, no implant failed, with a survival rate of 100% on these 36 implants. In conclusion, it is possible to establish that the number of decementations of the cement-retained crowns cemented with Temp Bond non-eugenol was higher, but not statistically significant. In contrast, the biological complications per implant and the MBL were significantly higher in the cement-retained crowns cemented with Implacem.

The adaptation of a sealer along with the periphery of the dentinal tubules of the root canal is studied. Various techniques have been used for the application of these sealers onto the canal wall for better adaptation but have not been compared to date. The purpose of the study was to comparatively evaluate the sealing ability of a bioceramic sealer with AH plus sealer with root canal dentin using three different techniques for the application of sealer. One hundred twenty extracted maxillary and mandibular anterior teeth were collected, disinfected, and decoronated at the cemento-enamel junction to maintain a standard working length for all samples. The establishment of the working length (40.10) and instrumentation was performed using a rotary instrument, along with a standard irrigation regimen. The teeth were then divided into two main groups according to the sealer used, i.e., Group A (AH Plus) and Group B (iRoot SP). These two main groups were categorized into three sub-groups depending on the technique of sealer placement, i.e., Subgroup 1 (master cone gutta-percha), Subgroup 2 (bidirectional spiral), and Subgroup 3 (passive ultrasonic activation). Out of the 20 samples, 15 samples were randomly allocated for the assessment of sealing ability using the routine dye extraction method, and to verify the results of the dye extraction method, a more advanced evaluation method, i.e., SEM evaluation, was utilized further. To this end, five random samples from each subgroup were allocated for SEM analysis. The obtained scores were then statistically analyzed using an ANOVA test and Post Hoc Tukey’s test. In the current study, statistical significance was seen among the three main groups and six subgroups with p-values < 0.005. Subgroup B3 performed significantly better than the other subgroups in both the dye extraction method as well as in SEM analysis. The highest microleakage was shown by subgroup A1; it also exhibited poor penetration of sealer in SEM evaluation. The bioceramic sealer (iRoot SP), when applied using passive ultrasonic activation, showed the best results in both the dye extraction method and the SEM evaluation.

Objective: Many authors have tried to face the anatomical limitations resulting from maxillary bone atrophy. Up to five millimeters bone height, the lateral sinus floor elevation is the most commonly used and validated strategy to achieve the prosthetic rehabilitation. However, the disadvantages of this technique are its invasiveness and delayed rehabilitation. The aim of this paper was to assess 5 years clinical outcome of implants placed with a technique that allows the percrestal sinus floor elevation and the immediate implant placement. Materials and Methods: 30 transcrestal sinus floor elevations with immediate implant placement were performed in severely atrophic maxillae. Implant survival, marginal bone level variation, harvested bone height variation and periodontal indices were assessed. Results: After a five year follow up none of the thirty implants were lost. The mean value of vertical harvested bone loss was 5%. The mean crestal bone loss was -0.33 mm (Standard Deviation (SD) 0.11 mm). The mean value of periodontal indices was respectively: PD 1.22 mm (SD 0.72 mm), PI 17.47% (SD 15.01 mm), BOP 9, 87 %.,( SD 19.17 mm). Conclusion: The results obtained are comparable with success criteria in implant rehabilitation. The reported technique proved to be successful in the population observed, with minimal trauma and reduced invasiveness.

Objectives: The aim of this research was to evaluate the effect of long-term use of three intracanal medicaments on the radicular dentin microhardness and fracture resistance. Material and methods: A chemomechanical preparation was done using the Protaper rotary instruments up to F3. The teeth were stored in an incubator at 37°C at 100% humidity and were categorized in three groups by random allocation, namely: Triple Antibiotic Paste (TAP), Calcium hydroxide paste (Apexcal) and Ledermix. Following medicament application, the access openings of all teeth were sealed with 4 mm thickness of cavit. The samples were stored for periods of 1 week, 1 month and 3months. Two dentin cylinders measuring 5mm and 3mm were obtained from each sample. The cervical third was used for fracture resistance and the middle third was used for micro hardness evaluation. The microhardness testing was done using a Knoop microhardness tester, and the fracture resistance testing was done using the universal testing machine. Results: Calcium hydroxide showed maximally negative effect on the physical properties of radicular dentin compared to TAP (p= 0.0100 at one month and Ledermix (p=0.0001 at one month ). With an increase in the application time, there was an increased deterioration in the physical properties of radicular dentin. Conclusion: Long-term placement of calcium hydroxide, Triple Antibiotic Paste, and Ledermix (p= 0.0001at 3 months) significantly affects the microhardness and fracture resistance of radicular dentin.

Objective: To evaluate the difference in torsional resistance, angular deflection and fragment length between two new rotary instruments: AF Blue S4 and S-One. These files share all features except cross- sectional design. Material and Methods: A total of 40 new Nickel-Titanium instruments of 25 mm in length were tested in this study and divided in two groups: 20 AF Blue S4, tip 25 and constant 6% taper and 20 AF-Blue S4 tip 25 and constant 6% taper. The torsional test was performed by the use of a torque recording endodontic motor (KaVo, Biberac, Germany). Torque to Fracture (TtF), Angular Deflection (AD) and Fragment Length (FL) was recorded for each instrument. To ensure an immovable block at 3mm of the instrument tip, an auto-polymerizing resin (DuraLay; Reliance Dental Mfg Co, Worth, IL) was used. Each file was rotated clockwise at a speed of 300 rpm until fracture occurred. Results: Group A (AF Blue S4) showed higher TtF and AD than Group B (S-One), and statistical analysis found significant differences between the two instruments (p0.05) between the two instruments. Conclusion: The AF Blue S4 seems to have a higher resistance to torsional stress in vitro. Clinically, the use of AF Blue S4 could be safer in narrow canals.

Introduction: The aim of the present study is to evaluate the torsional resistance and the operative torque of two different files and to introduce the concept of “torque range”, that indicates the difference between torque at failure and operative torque. Materials and Methods: 20 ProTaper Next® (PTN) X1 and 20 EdgeFile® X7 17.04 were randomly divided into two equal groups (n = 10) and were subjected to the following two tests: operative torque recorded during root canal shaping of a single-rooted mandibular premolar and a torsional test performed at 300 rpm while the apical 3 mm of each file were firmly secured. The torque range was calculated from the difference between “Operative torque” and “torque at fracture.” A statistical t-test was performed to determinate the difference. Statistical significance was set at P < 0.05. Results: EdgeFile X7 instruments reached the working length significantly faster and with less torque generated (P < 0.05) compared to PTN . In torsional static resistance (torque at failure), the two files demonstrated no significant different values (P > 0.05). The range between the mean values of maximum torque at failure and operative torque, “torque range,” was twice bigger for EdgeFile X7 instruments. Conclusions: The EdgeFile X7 has a wider “torque range” when compared to PTN X1. This new concept could be a relevant innovation to match in vivo and in vitro studies and to obtain a more clinically relevant result.

Introduction: The aim of this study was to investigate the role of the cross-sectional design surface in improving the cyclic fatigue resistance by comparing two nickel–titanium (NiTi) rotary instruments with the same heat-treatment and grinding procedure. Materials and Methods: A total of 40 new NiTi instruments (20 S-One 25.06 taper and 20 AF Blue S4 25.06 taper) were tested in the present study. Both instruments were rotated at 300 rpm and with a torque setting of 2 Ncm) using an endodontic motor in the same artificial canal (90° angle of curvature and 3 mm radius). A Student's t-test was performed to determinate the differences in terms of time to fracture (TtF) and the length of the fractured portion between the two different instruments. Significance was set at P < 0.05. Results: The differences in terms of TtF for cyclic fatigue resistance between the two files were statistically significant (P < 0.05). In terms of fractured length, not statistically significant differences were found (P > 0.05). Scanning electron microscopy images showed patterns of cyclic fatigue striations. Conclusion: The results of this study confirm and enhance the role of cross-section in increasing the cyclic fatigue resistance of NiTi rotary instruments.

Introduction: The introduction of mineral trioxide aggregate (MTA) and bioceramic sealers increased the success rate of endodontic surgery and perforation repair. The aim of this study was to evaluate the marginal adaptation at different times of endosequence root repair material (ERMM) in order to evaluate its dimensional stability using variable pressure-scanning electron microscope (VP-SEM). Material And Methods: Fourty-eight teeth were selected shaped up to a master apical size of 25. Then a 3 mm cut perpendicular to the long axis and a retrograde cavity preparation were performed. In order to obtain 2 mm thick sample a second cut was done and, in this disk, ERMM was inserted. The samples were stored at 37°. The samples were divided into four time-depending groups observed with VP-SEM at time 0 (Group 1) and after 2 (Group 2), 7 (Group 3) and 30 days (Group 4) after ERRM setting. Statistical analysis with one way-ANOVA test was performed (95%). Results: None of the four groups analyzed showed a complete marginal adaptation between dentin and ERRM. Instead, in all groups ERRM exhibited a completely preserved marginal adaptation to the dentin wall in all time-dependent groups. The mean (±SD) gap value was for time 0, 3.91 (±2.55) µm after 2 days, 4.32 (±2.69), after 7 days 4.49 (±2.53), and after 30 days 4.81 (±2.85) µm. No statistically significant difference was found between the four groups. Conclusions: The results of the present study demonstrate the dimensional stability over time of ERMM.

Background: Mandibular first molars appear to be the most commonly tooth subjected to a root canal treatment, therefore a better understanding of the anatomy critical zones for resistance of this teeth may decrease the treatment’s failure rate. So, this study was conducted to evaluate the dentin thickness of the danger zone in mesial roots of mandibular first molars using cone beam computed tomography in an Iranian population. Methods: In this cross-sectional study, 210 Cone Beam Computed Tomography acquisition of the mandibular first molars were collected from a radiology center in Qazvin. The dentin thickness of the mesial roots (mesiobuccal and mesiolingual canals) was measured from the furcation to 5 mm below. The relationship between the dentin thickness in the danger zone and parameters, like age, gender, placement side, root length, the curvature of the canal, canal type, presence of middle mesial canal, and distance between the orifices of the mesial canals was investigated. Frequency, mean and standard deviation for variables were calculated, and data analysis was done by SPSS using simple and multiple linear regression and Pearson correlation coefficient. Also, two-sample t-test was used to compare mesiobuccal and mesiolingual on two sides. The significant level was also considered at (p < 0.05). Results: The average minimum thickness of danger zone dentin was found to be 0.885 ± 0.259 mm in the mesiobuccal canal and 0.906 ± 0.206 mm in the mesiolingualcanal. Also, the minimum thickness of dentin in the mesiobuccal and mesiolingual canals in the range of 0 to 1 mm from the furcation was more than in other areas. There was no significant relationship between the minimum dentin thickness of the danger zone with gender, placement side, root length, canal type, and mesial canal entrance distance. But with increasing age, the thickness of dentin in the danger zone in the mesiolingualcanal increased significantly (p = 0.008). It was also observed that with the increase in the curvature of the canal, the thickness of the dentin in the danger zone in the mesiobuccal canal decreased (moderately curved (p = 0.008), severely curved (p = 0.046)). In addition, the thickness of the dentin in the mesiobuccal and mesiolingual canal was less in the samples with the middle mesial canal (p = 0.047, 0.044). Conclusions: Less dentin thickness in the danger zone in the mesial roots of mesiolingual mandibular first molars was seen in younger patients in mesiolingual canal, with a greater degree of canal curvature in the mesiobuccal canal and teeth with a middle mesial canal. Therefore, it is suggested that large taper instruments should be used with more precision to prevent complications.

Gender determination is the first step in forensic identification, followed by age and height determination, which are both affected by gender. This study assessed the accuracy of gender estimation using mandibular morphometric indices on panoramic radiographs of an Iranian population. This retrospective study evaluated 290 panoramic radiographs (145 males and 145 females). The maximum and minimum ramus width, coronoid height, condylar height, antegonial angle, antegonial depth, gonial angle, and the superior border of mental foramen were bilaterally measured as well as bicondylar and bigonial breadths using Scanora Lite. Correlation of parameters with gender was analyzed by univariate, multiple, and best models. All indices except for gonial angle were significantly different between males and females and can be used for gender determination according to univariate model. Condylar height, coronoid height, and superior border of mental foramen and ramus were still significantly greater in males than in females after controlling for the effect of confounders (p < 0.05). Based on the best model, a formula including five indices of bicondylar breadth, condylar height, coronoid height, minimum ramus width, and superior border of mental foramen was used for gender determination. Values higher than 56% indicate male gender, while lower values indicate female gender, with 81.38% specificity for correct detection of females and 88.97% sensitivity for correct detection of males. Despite the satisfactory results, future research should focus on larger populations to verify the accuracy of the present findings.

Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant’s parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal–Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.

Since there are no data in the literature regarding the comparison of the marginal adaptation of hydraulic sealers when used with a single-cone technique or through thermomechanical compaction, this study aimed to evaluate the behavior of four different endodontic sealers used with the two above-mentioned obturation techniques by evaluating the marginal gap existing between the obturation materials and the dentinal walls through scanning electron microscopy. Given this objective, a total of 104 single-rooted, straight canal teeth were selected and divided into four subgroups according to the selected endodontic sealer ((AH) Plus Bioceramic Sealer (AHP), EndoSequence BC Sealer HiFlow (ES), C-Root SP (CR), and GuttaFlow Bioseal (GF)). Each tooth was decoronated and instrumented with the HyFlex EDM/CM systematics up to 30.04. After irrigation procedures, the teeth of each subgroup were divided into two groups and obturated according to two different obturation techniques: the single-cone technique (SC) and the thermomechanical compaction technique (TC). After the required sealer setting time, each tooth was sectioned in three parts at 3, 6, and 9 mm from the apex, and each section was observed with a scanning electron microscope. The marginal gap of each sample was measured using G* Power Software v3.1, and the statistical analysis was performed using the Kruskal–Wallis test, followed by a post hoc Dunn’s test. Results showed that there were not any statistically significant differences in terms of the marginal gap between the two different above-mentioned obturation techniques for each sealer, except for the middle third of root canals, where a statistically significant difference was found for AHP, ES, and GF sealers. In conclusion, the thermomechanical compaction of hydraulic sealers and gutta-percha guarantees better sealing than the single-cone technique when the root canal shape is not rounded.

Abstract Aim To evaluate and compare radiographic crestal bone loss (CBL) and soft tissue parameters around submerged/two-stage and nonsubmerged/one-stage single implants with the same endosseous portion (body design and surface, thread design and distance) and identical intramucosal laser-microgrooved surface, after 3 years of loading. Materials and methods Twenty submerged/two-stage implants and 20 nonsubmerged/one-stage implants were placed randomly with a split-mouth design in the posterior areas of 20 partially edentulous patients. Radiographic and clinical examinations were carried out at the implant placement, at the delivery of prosthetic restorations, and at each year of the follow-up period. Plaque index (PI), probing depth (PD), bleeding on probing (BOP), and gingival recession (REC) were recorded. Radiographic crestal bone levels were assessed at the mesial and distal aspect of the implant sites. In addition, the influence of the vertical keratinized tissue thickness (KTT) on CBL was investigated. Results At the delivery of prosthetic restorations, a statistically significant difference (P = 0.013) was found in radiographic mean CBL between submerged and nonsubmerged implants (0.15 ± 0.05 mm vs. 0.11 ± 0.04 mm). At the end of the follow-up period, no statistical difference (P = 0.741) was found in the mean CBL between submerged and nonsubmerged implants (0.27 ± 04 mm vs. 0.26 ± 0.5 mm). The changes in the soft tissues including PI, PD, BOP, and REC had no significant differences in either group. Moreover, KTT did not show a statistical correlation with CBL. Conclusions After 3 years of loading, no statistical difference was noted in CBL and soft tissue conditions between single submerged two-stage and nonsubmerged one-stage laser-microgrooved implants. Trial registration http://clinicaltrials.gov/ct2/show/NCT03674762

The objective of the present article was to qualitatively and quantitatively review the association between chronic mechanical irritation and oral squamous cell carcinoma (OSCC). PubMed, SCOPUS, and Web of Science databases were searched using the keyword combinations “chronic trauma and oral squamous cell carcinoma; chronic irritation and oral squamous cell carcinoma; chronic irritation and oral cancer; and chronic trauma and oral cancer.” Duplicates and irrelevant articles were excluded after the title and abstract screening. The full texts of the remaining articles were assessed using selection criteria. A total of 375 (PubMed-126; SCOPUS-152; WOS-97) articles were screened, and 343 duplicates and irrelevant articles were excluded from the study. Only 9 of the remaining 32 articles met the selection criteria and were included in the qualitative analysis. Buccal mucosa and tongue, being highly prone to chronic irritation through the dental prosthesis, were the common sites for OSCC. Edentulous subjects with ill-fitting dentures were at a high risk of developing chronic irritation associated-OSCC. According to the Joanna Briggs Institute of risk assessment, eight of the nine included studies had a low risk of bias. The quantitative analysis showed a significant association (p < 0.00001) between the chronic oral mucosal irritation and OSCC with an overall risk ratio of 2.56 at a confidence interval of 1.96-3.35. Chronic oral mucosa irritation has a significant association with OSCC, and the nature of association could be that of a potential co-factor (dependent risk factor) rather than an independent risk factor.

Dear Editor, We thank Dr. Jian Xie for the valuable inputs on our paper titled ‘Chronic mechanical irritation and oral squamous cell carcinoma: A systematic review and meta-analysis [1].’ The first concern of Dr. Xie was that we had included two studies that were based on the same population. We re-examined these papers, one was published in 2010 [2] and the other in 2017 [3] by the same group of authors. Given the significant time difference between the two papers, we did not want to presume they were from the same sample population. There is no clear evidence that they are from the same sample population. Read more in PDF.

Coronal discoloration of endodontically treated teeth is a challenge in clinical dentistry. This study aimed to compare coronal discoloration induced by White Mineral Trioxide Aggregate and Calcium-enriched mixture cement. Fifty single-rooted, unrestored premolar teeth extracted for orthodontic reasons were selected. After access cavity preparation, all the root canals were instrumented with MTWO rotary files up to #40.6%. The specimens were randomly assigned to two experimental groups, White Mineral Trioxide Aggregate and Calcium-enriched mixture cement groups (n = 20), and two control groups (n = 5). In the White Mineral Trioxide Aggregate and Calcium-enriched mixture cement groups, the material was condensed via the access cavity 3 mm below the cementoenamel junction to a thickness of 3 mm. Tooth color was assessed using computer analysis of digital images. Tooth color measurements were recorded at eight time intervals: before material placement (but after tooth preparation), at 24 h, 48 h, one week, two weeks, four weeks, eight weeks, and sixteen weeks after material placement. Data were analyzed using t-test, ANOVA, repeated measure ANOVA, and Tukey HSD tests. The significance level was set at 5% for all the tests. Cervical discoloration of teeth in both experimental groups significantly increased over time (p < 0.05). However, samples in the White Mineral Trioxide Aggregate group showed more discoloration in cervical regions than Calcium-enriched mixture cement specimens after two, four, eight, and sixteen weeks (p < 0.05). Applying both White Mineral Trioxide Aggregate and Calcium-enriched mixture cement induced coronal discoloration; however, White Mineral Trioxide Aggregate samples exhibited greater cervical discoloration than Calcium-enriched mixture cement specimens after two, four, eight, and sixteen weeks.

This study assessed the relationship between posterior permanent dentition and radiographic changes of the mandibular condyle. This descriptive, cross-sectional study was conducted on 300 panoramic radiographs of patients over 40 years of age (188 females and 112 males). Panoramic radiographs were evaluated for condylar changes such as flattening, subcortical sclerosis, subcortical cyst, erosion, osteophytes, and generalized sclerosis. Presence of muscle pain and temporomandibular joint (TMJ) pain and sounds, and history of TMJ trauma were also assessed. The occlusal scheme of posterior teeth was analyzed according to the Eichner’s index. The frequency of condylar changes was calculated in the right and left sides, and their association with posterior permanent dentition was analyzed by the Chi-square test (alpha = 0.05). The frequency of flattening, muscle pain, TMJ sounds, and erosion was 11.7%, 9.7%, 5.7%, and 3.7% in the right side, respectively. The frequency of flattening, muscle pain, erosion, and subcortical cyst was 12%, 9.3%, 5%, and 5% in the left side, respectively. The frequency of bilateral muscle pain, flattening, TMJ sounds, and TMJ pain was 18%, 16.7%, 11.7%, and 9.3%, respectively. Cases with TMJ trauma, generalized sclerosis, and osteophytes were few. According to the Eichner’s index, most patients with condylar changes had classes A and B, and a smaller percentage had class C. No significant difference was noted between healthy individuals and those with condylar changes regarding dentition patterns. No relationship existed between condylar changes and posterior permanent dentition pattern.

Objective: To compare the influence of different clinical operative motions (pecking motion vs. MIMERACI) on apical debris extrusion using WaveOne Gold and EdgeOne Fire reciprocating files in the mesiobuccal canal of extracted molars. Material and Methods: Sixty mandibular molar teeth with curvature less than 20° were divided into 4 groups (n=15 each): G1A: WOG pecking Group; G1B: WOG MIMERACI Group; G2A: EOF pecking Group; and G2B: EOF MIMERACI Group. The produced debris was collected in the preweighed Eppendorf tubes and following the shaping procedures; they dried in the incubator for 5 days at 70o C. The tubes were weighed again, and the final extruded debris was measured by subtracting the pre-instrumentation from post-instrumentation weight of tubes. The canal preparation time was calculated with a digital chronometer. The obtained data were analyzed using two-way ANOVA at a 0.05 level of significance. Results: MIMERACI method significantly decreased the amount of debris pushed out in both instruments (p0.05). Conclusion: All tested instruments pushed debris out apically at some level, but MIMERACI operative technique was associated with significantly less apical debris extrusion.

Technological innovation and the modernization of manufacturing procedures have thoroughly redefined the field of nickel–titanium (NiTi) rotary and reciprocating endodontic instruments [...]

This study aimed to evaluate and compare two different fiber-reinforced composite materials in class I post-endodontic restoration in molars. A total of 50 patients were randomly assigned into two groups (n = 25 for each group); group A: everX Posterior (packable composite) with a top layer of solareX (nano-hybrid composite) and group B: everX Flow (flowable composite) with a top layer of G-aenial universal injectable (flowable composite). Patients were evaluated immediately after the procedure (baseline), at 6 months, and at 1 year time intervals based on the modified USPHS criteria. The statistical analysis using a chi-square test showed no statistically significant difference in the clinical performance of group A and group B. Clinical performance of the combination of everX Flow with overlying G-aenial universal injectable composite proved to be comparable with everX Posterior with overlying solareX composite as post-endodontic restorations in class I lesions in permanent molars.

The aim of this retrospective study was to investigate the relationship between the amount of early bone remodeling, the marginal bone loss (MBL) progression, and the peri-implant sulcular fluid concentration of active metalloproteinase-8 (a-MMP-8) and the incidence of peri-implantitis (P) over 5 years of implant function. It has been documented that dental implants with a high degree of early marginal bone loss (MBL) are likely to achieve additional increased MBL during function. Moreover, it has been speculated that early increased MBL might be a predictive factor for the subsequent onset of peri-implant inflammatory diseases. Clinical and radiographic data at implant placement (T0) and restoration delivery (TR) at 6 months (T1), 2 years (T2), and 5 years (T5) post-loading were retrospectively collected. MBL levels/rates (MBLr) and peri-implant sulcular fluid levels/rates of a-MMP-8 were assessed at TR, T1, T2, and T5. Implants were divided into two groups: group 1 with peri-implantitis (P+) and group 2 without peri-implantitis (P−). A multi-level simple binary logistic regression, using generalized estimation equations (GEEs), was implemented to assess the association between each independent variable and P+. A receiver operating characteristics (ROC) curve was used to evaluate an optimal cutoff point for T1 MBL degree and a-MMP-8 level to discriminate between P+ and P− implants. A total of 80 patients who had received 80 implants between them (39 implants with a laser-microtextured collar surface (LMS) and 41 implants with a machined collar surface (MS)) were included. Periapical radiographs and a software package were used to measure MBL rates. Peri-implant sulcular implant fluid samples were analyzed by a chairside mouth-rinse test (ImplantSafe®) in combination with a digital reader (ORALyzer®). Twenty-four implants (six with an LMS and eighteen with an MS) were classified as P+. No statistically significant association was found between the amount of early bone remodeling, MBL progression, and MBLr and the incidence of peri-implantitis. Implants with a-MMP-8 levels >15.3 ng/mL at T1 presented a significantly higher probability of P+. The amount of early marginal bone remodeling cannot be considered as an indicator of the subsequent onset of P, whereas high a-MMP-8 levels 6 months after loading could have a distinct ability to predict P.

The pattern of expansion of endodontic lesions in the jaws has been less commonly addressed in the literature. For this reason, the aim of this study is to assess the pattern of endodontic lesions of maxillary and mandibular posterior teeth using cone-beam computed tomography (CBCT). This cross-sectional study was conducted on 317 endodontic lesions of posterior teeth on CBCT scans retrieved from a radiology center in Qazvin, Iran, from 2020 to 2022. Endodontic lesions were assessed on sagittal, coronal, and axial sections by an endodontist and dental student using the Romexis software. The largest lesion diameter was measured occluso-apically, mesiodistally, and buccolingually. Lesion size was analyzed based on age, gender, jaw, tooth type, and presence/absence of root filling by independent samples t-tests and a one-way Analysis Of Variannce (ANOVA). The largest diameter of lesions in the maxilla and mandible was recorded in the occluso-apical dimension followed by buccolingual and mesiodistal dimensions (p > 0.05). The pattern of lesions was the same in teeth with and without endodontic treatment, but it was significantly different in maxillary and mandibular endodontically treated teeth in the occluso-apical and buccolingual dimensions (p < 0.05). No significant correlation was noted with tooth type or jaw except for maxillary and mandibular first molar lesions, which were significantly different in the occluso-apical dimension (p < 0.05). Lesion size in all three dimensions was significantly greater in males than females (p < 0.05), and was the highest in the occluso-apical dimension in both genders. In the maxilla, the mean lesion size significantly decreased in the mesiodistal dimension with age (p < 0.05). In conclusion, the largest lesion diameter in the maxilla and mandible was found in the occluso-apical dimension, indicating the role of bone density in the pattern of lesions.

The aim of this study is to assess the surface alterations of four reciprocating instruments before and after the shaping of four resin-simulated root canals. The following four different reciprocating instruments are selected: 10 Reciproc Blue (RB25), 10 WaveOne Gold (WOG), 10 EdgeOne Fire (EOF) and 10 recently introduced instruments OneRECI (OR), for a total of 40 new instruments. Before root canal shaping, each instrument is mounted on a stub in a standardized position and observed using a scanning electron microscope (SEM) to detect any surface alteration, such as microfractures, metal defects, deformations, blunt and disruption of cutting edges, debris, pitting and tip flattening. Micrographs are acquired at the level of the tip, 4 mm, 8 mm and 12 mm from it. After that, each instrument is used in four simulated resin root canals. SEM observation was repeated after the simulated clinical use to assess the wear resistance of the instruments. Surface alterations are registered before and after instrumentation and statistical analysis is performed using a Chi-Square test to verify homogeneity of defects distribution and GLM to evaluate the differences of RMS at baseline and after use for both groups (α level 0.05). Before simulated clinical uses, no alterations are found except for three cases of EOF with metal strips in correspondence to the tip, disruption of the cutting edge of WOG and oily spotting on two different OR. After simulated clinical use, EOF shows a statistically significant difference in terms of spiral distortion and flattening of the cutting edges. The OR shows the highest presence of debris despite the ultrasonic cleaning procedures. No instrument fractures are observed. EOF should be discarded after four clinical uses and carefully inspected after each insertion into root canals. Moreover, tough attention should be paid during disinfection and cleaning procedures after instrumentation considering the copious debris detected in each instrument, particularly in OR.

Background and aims: Considering the advantages of rotary files in instrumenting the root canals of permanent teeth and a lack of adequate data on the use of these systems in primary teeth, the present study aimed to evaluate two rotary files and compare them with hand files in the cleaning efficacy of the root canals of primary molar teeth. Materials and methods: In the present study, three groups of teeth were prepared with Kedo-S paediatric rotary file system, RaCe (reamer with alternating cutting edges), and hand files (n = 40). The groups were evaluated under a stereomicroscope concerning the cleaning efficacy of the files after cleaning the teeth in the apical, middle, and coronal thirds. The data were analyzed with SPSS 24 (IBM Corporation, USA, 2016) using Fisher’s exact test and chi-squared test; statistical significance was set at p < 0.05. Results: There were no significant differences in the apical and middle thirds between the different study groups. However, there were significant differences in the coronal third between the hand file and Kedo-S (p = 0.016) and RaCe and Kedo-S (p = 0.001) groups. Conclusions: The present study showed that Kedo-S files were more effective than RaCe and hand files in the coronal area than the hand and RaCe files.

This study aimed to compare the C-reactive protein level and visual analog scale scores of piezo- and rotatory-based surgical extraction of the third molar. As a split-mouth study, the comparative groups consisted of 25 patients, each of whom underwent surgical removal of the third molar by piezo on one side and rotatory bur on the other side. C-reactive protein levels were quantitatively assessed (enzyme-linked immunosorbent assay) before and immediately post-extraction. The immediate postoperative blood sample (baseline) C-reactive protein levels were compared with 24 h and 72 h post-op samples, both within and between the groups. Pain was assessed using the visual analog scale at 24 h and 72 h post-operatively. The C-reactive protein levels were lower in the piezo group than in the rotatory group, although the difference was not significant (p > 0.05). The visual analog scale score was significantly (p < 0.01) lower in the piezo group than in the rotatory group. The C-reactive protein levels increased in both the rotary and piezo groups from the pre-op to the immediate post-op value, but in the piezo group, the levels dropped back after 24 h. On the contrary, in the rotatory group, the C-reactive level kept increasing until 24 h; the visual analog scale score dropped significantly from 24 to 72 h for both the rotatory and piezo groups. Surgical techniques that could spare the surrounding soft tissues, such as the piezo, could aid in reducing overall postoperative morbidity.

Objectives: The aim of this retrospective multicentre cohort study was to compare clinical outcomes, soft tissues conditions and differences in marginal bone loss between implants with a laser-microgrooved collar placed in posterior maxillary extraction sockets grafted by 4 to 5 months, and in posterior maxillary pristine bone (spontaneously healed posterior maxillary extraction sockets) by means of osteotome-mediated sinus floor elevation, over a period of 5 years after functional loading. Material and Methods: Patients of Group 1 underwent extractions with sockets preservation using porcine-derived bone, covered with collagen membrane. Group 2 underwent extractions without socket preservation. Patients of Group 1 received implants in grafted sites, and Group 2 received implants in spontaneously healed bone using a maxillary sinus lift with crestal approach. Results: Over the observation period, the overall clinical success rate in Group 1 and Group 2 was 98% and 100%, respectively, with no differences between the procedures and implants used. Cumulative radiographic marginal bone loss ranged from 0.03 to 0.39 mm after 60 months of functional loading. There were no statistically significant differences in marginal bone loss between short and standard-length implants placed in grafted extraction sockets and in pristine bone. Conclusions: Short and standard implants with a laser-microgrooved collar, placed in posterior maxillary extraction sockets grafted by 4 to 5 months, and in posterior maxillary pristine bone (spontaneously healed posterior maxillary extraction sockets) by means of osteotome-mediated sinus floor elevation, exhibited no statistical difference in success rate, clinical parameters and marginal bone loss

An in-depth evaluation of the mechanical and metallurgical properties of NiTi instruments is fundamental to assess their performance and to compare recently introduced instrument with widespread ones. According to this, since there are no data on this topic, the aim of the study was to mechanically and metallurgically evaluate an instrument recently introduced into the market (ZenFlex (ZF)), by comparing it with two well-known instruments with similar characteristics: Vortex Blue (VB) and EdgeSequel Sapphire (EES). According to this, 195 instruments were selected: 65 ZF, 65 VB and 65 EES. Each group was divided in subgroups according to the mechanical tests (i.e., cyclic fatigue resistance, torsional resistance and bending ability; (n = 20)) and the metallurgical test (differential scanning calorimetry (n = 5)). A scanning electron microscopy was performed to verify the causes of fracture after mechanical tests (cyclic fatigue and torsional tests). According to results, VB showed the highest flexibility and cyclic fatigue resistance in comparison to the other instruments, with a statistically significant difference (p < 0.05). Regarding torsional resistance, EES showed the lowest value of torque at fracture, with a statistically significant difference, whilst the comparison between ZF and VB showed no statistically significant difference (p > 0.05). DSC analysis pointed out that VB had the highest austenite start and finish temperatures, followed by ESS and then ZF. ESS sample showed the highest martensite start and finish temperatures followed by VB and ZF. Considering the results, it can be concluded that VB showed the best mechanical performance during static tests in comparison to ESS and ZF. This is fundamentally due to the interaction of parameters such as instrument design and heat-treatments that are able to enhance its mechanical performance.

Plastic peri-implant surgical procedures aiming to increase soft tissue volume around dental implants have long been well-described. These are represented by: pedicle soft tissue grafts (rotational flap procedures and advanced flap procedures) and free soft tissue grafts (epithelialized, also called free gingival graft (FGG), and non-epithelialized, also called, connective tissue graft (CTG) or a combination of both. To bypass the drawback connected with autologous grafts harvesting, xenogenic collagen matrices (XCM)s and collagen-based matrices derived from porcine dermis (PDXCM)s have been introduced, as an alternative, in plastic peri-implant procedures. Aim: This review is aimed to evaluate and to critically analyze the available evidence on the effectiveness of XCMs and PDXCMs in soft tissue volume augmentation around dental implants. Moreover, a clinical case with a new soft tissue grafting procedure technique (Guided Soft Tissue Regeneration, GSTR) is presented. Material and Methods: An electronic search was performed on the MEDLINE database, SCOPUS, Cochrane Library and Web of Science. The electronic search provided a total of 133 articles. One hundred and twenty-eight not meeting the inclusion criteria were excluded. Seven articles of human randomized clinical trials were selected. A total number of 108 patients were treated with CTG, and 110 patients with XCM. Results: in peri-implant soft tissue augmentation procedures, XCMs seem an effective alternative to CTGs, associated with lower patient morbidity and lower operative times.

The present investigation evaluated the effect of the combination of different dental filling materials in Class I cavities under occlusal loading using three-dimensional finite elements analysis (FEA). Six computer-generated and restored models of a lower molar were created in the CAD software and compared according to the biomechanical response during chewing load condition. Two adhesively bonded bulk restorative materials [bulk-fill resin composite (BF) or Alkasite (Alk)] were evaluated with or without the presence of a base material below (flowable resin composite or glass ionomer cement). A food bolus was placed on the occlusal surface mimicking the compressive occlusal load (600 N) during the static linear analysis. The maximum principal stress (tensile) was calculated as stress criteria in enamel, dentin and restoration. All models showed high stresses along the enamel/restoration margin with a similar stress trend for models restored with the same upper-layer material. Stress values up to 12.04 MPa (Alk) or up to 11.12 MPa (BF) were recorded at the enamel margins. The use of flexible polymeric or ionic base material in combination with bulk-fill resin composite or Alk did not reduce the stress magnitude in dentine and enamel. Class I cavities adhesively restored with bulk-fill resin composite showed lighter stress concentration as well as Alk. Therefore, adhesively bonded Alk restoration showed a promising mechanical behavior when used with different base materials or as a bulk restoration for posterior Class I cavity.