Search

Fatty acid composition is an essential aspect of the qualitative assessment of olive oil. A method for evaluating and trending fatty acid composition of olive varieties directly from a limited amount of drupes, has been proven reliable in comparison with traditional oil analysis. No significant difference was detected between the two methods for the 27 cultivars tested, despite presenting decidedly different acid compositions. The results obtained, crossed with those of oil yield, can represent a useful resource to set the harvest calendars by choosing the most suitable time for the production of superior quality oils and for reducing the risk of pathogen infections or pest attack. For three cultivars, the acid composition was evaluated during three ripening phases (green, veraisoned and veraisoned to black). The different behaviors suggest it is the genotype that determines this -still little known- physiological trait in olive. An interesting finding was that the oils from drupes harvested in August showed linolenic acid values higher than the limit (1.00%) set in the international standards for the classification of olive oils, requesting further investigation.

Abstract Background The aim of the study was to compare the accuracy and reproducibility of three different 3D facial scanning systems, relying, respectively, on stereophotogrammetry, structured light and a smartphone app and camera. Methods Thirty subjects have been scanned with three different facial scanning systems, stereophotogrammetry, structured light and a smartphone app and camera. Linear measurements were compared with direct anthropometries measured on the patient's face, while the study of areas (forehead, tip of the nose, chin, right and left cheek) was evaluated by overlapping scans using the Geomagic Control X program. Statistical analyses were conducted using IBM SPSS v28 software. Results The ANOVA test was used to compare linear distances and direct anthropometry measurements, revealing statically significant values for all distances investigated, especially for the Face Hunter scanner, except for the Prn–Pog′ distance (p = 0.092). The three facial scans were superimposed pairwise almost the 100 per cent of the overlapping areas fell within the tolerance limits for all three comparisons analysed. The chin was the most accurately reproduced, with no differences among scanners, while the forehead proved to be the least accurately reproduced by all scanners. Conclusions All three acquisition systems proved to be effective in capturing 3D images of the face, with the exception of the Face Hunter scanner, that produced statistically significant differences in linear measurements for the distances Tr–Na′ and Zyg–Zyg with respect to direct anthropometric measurements.

Distalisation of the upper molars can be used to treat a dental Class II deep bite malocclusion with a flat facial profile. It is a useful procedure when extraction treatment has been refused and providing distalisation is an appropriate solution to the patient’s problem.

To determine the most suitable region of the palate for the insertion of miniscrews.

The aim was to objectively assess compliance in patients prescribed headgear and evaluate the impact of monitoring awareness, treatment duration, gender, and age on compliance levels. A total of 22 patients with Class II malocclusion wore the headgear integrated with the force and temperature sensitive Smartgear monitoring system (Smartgear, Swissorthodontics AG, Cham, Switzerland). Patients were instructed to wear the headgear for 13 h daily over a 3-month period. Randomly, 11 patients were informed that they monitored and 11 were not informed. Data were organized using Microsoft Excel and analyzed using R for statistical estimates, graphs, and hypothesis testing. Smartgear recorded an average daily compliance of 6.7 h. No statistically significant differences were found in cooperation between study group and control group over the 3 months of treatment, regardless of gender and age. However, there was slight greater cooperation in the first month than in the other months, and patients ≤10 years of age had almost 2 h more cooperation than their older counterparts. Moreover, the informed group exhibited an average of 1.1 more hours of cooperation per day than the uninformed group, which may carry clinical significance. This cooperation primarily occurred at night and was found to be statistically significant. Compliance among young patients typically remained lower than the prescribed level, regardless of their gender and psychological maturity. Although an awareness of monitoring does not seem to improve compliance, implementing such systems could still offer dentists a valuable means of obtaining objective information about their patients’ adherence.

Objective: To evaluate the differences in frictional resistance between in-house 3D-printed resin brackets (IH3DBs) and two types of commercially available brackets in combination with three different archwires. Methods: Friction tests were performed using a dynamometer and a millimetre sled to simulate first premolar post-extraction space closure. Three different brackets, namely PRIMO metallic brackets, Crystal composite brackets and in-house 3D-printed brackets, were tested in combination with three different archwires (0.016-inch NiTi, 0.019 × 0.025-inch NiTi and 0.019 × 0.025-inch SS). Statistical analysis was performed to verify the differences in friction among the bracket and archwire combinations. For all the tests, the significance level was set at p < 0.05. Results: There were significant differences among the three brackets tested with both the 0.016-inch NiTi and 0.019 × 0.025-inch SS archwires (p = 0.026 and p = 0.017, respectively). Only tests with the 0.019 × 0.025-inch NiTi archwire yielded no statistically significant differences between the groups. The composite bracket generated clinically and statistically more friction than both the IH3DB and metallic bracket, with no differences between the latter two. Conclusions: The IH3DBs demonstrated comparable frictional resistance properties to the metal brackets and better than the composite brackets with all the archwires tested.

Background: To evaluate colour stability in artificial saliva by mechanically simulating brushing between in-house 3D-printed resin brackets (IH3DBs) and commercially available brackets. Methods: The samples consist of four sets of ten aesthetic brackets each supplied by four different manufacturers: clear Damon, Synovate C, Crystal and in-house 3D printed brackets (IH3DBs). The brackets were immersed in a plastic tank containing artificial saliva maintained at a constant temperature of 37 °C with a 65-minute brushing system. Staining changes at T0 (pre-brushing) and T1 (post-brushing) were measured with a spectrophotometer according to the VITA and Master scale and brightness values. Statistical analysis compared the colour changes with the Wilcoxon test and in case of significance, severity was investigated. The significance level considered was p < 0.05. Results: The IH3DBs shows statistically significant differences for both scales and brightness values. The Damon and the Crystal brackets report a statistically significant difference only for brightness. The Synovate C bracket shows no statistically significant differences. Conclusions: The IH3DB produced chromaticity differences for the VITA and Master scale possibly due to the surface roughness created during the printing process. However, the IH3DBs together with Damon Clear improved brightness, due to the mechanical action of brushing.

Objective: Compare the bonding survival rate of two distinct bonding materials: Ortho Solo + Gradia LoFlo Resin and single component GC Ortho Connect. Materials and Methods: Indirect bonding fixed appliance treatment was required for 26 consecutive patients, 8 males and 18 females, with a mean age of 22.1 +/- 4.2 years. All patients were treated with SWM (Straight-Wire Mirabella) technique (Sweden and Martina, Due Carrare, Padova, Italy). Each patient's bonding process followed a contralateral pattern. Firstly, a 37 % orthophosphoric acid etching gel was used for 20 s, subsequently the single or two components light-cured adhesives were applied through a split-mouth cross-arch procedure. The patients underwent a 12-month follow-up period and brackets failures were rebounded, but not further included in the study. Statistical analysis was performed to analyse the survival rate of the bonding materials and the influence of the variables, with a significant level of α = 0,05. Results: The GC Connect group was used on 349 teeth, while the Ortho Solo + Gradia group was used on 351 teeth, and the indirect debonding rate was respectively 17.5% and 12.8%. With respect to the total sample, statistically significant values were found for both sex and dental arch. The bracket’s survival rate for incisors, canines, premolars and molars was not significant. However, a higher debonding rate was clinically appreciable in upper and lower molars. Conclusion: In a 12-months observation period, considering all maxillary and mandibular teeth the indirect survival rate for the group GC Ortho Connect and Ortho Solo + Gradia was respectively 82.5% and 87.2%. Although the difference was not significant, a pronounced tendency to debonding for the single component group was appreciable from a clinically point of view.

Abstract Objectives To investigate the accuracy of torque, tip and rotation and linear intra-arch movements yielded by passive self-ligating lingual straight-wire appliances with brackets featuring square slots. Materials and methods Twenty-five adult Caucasian patients (16 females and 9 males; mean age 26.5 ± 4.3 years) with Class I or mild Class II head-to-head malocclusion were orthodontically treated via passive lingual self-ligating straight-wire appliances (ALIAS, Ormco, Orange, CA) with no extraction. Records were retrospectively analysed, and digital models of pre-treatment (T0), planned (T1) and achieved (T2) phase were acquired for both arches in each patient via an intraoral scanner (Medit I500 (iScan Medit, Seoul, Korea). VAM software (Vectra, Canfield Scientific, Fairfield, NJ, USA) was used to measure both angular values (torque, tip and rotation) and linear intra-arch widths (between canines, first and second premolars and first and second molars). Measurements were obtained for all the movements investigated for each tooth group (incisors, canines, premolars and molars), by arch (maxillary and mandibular) and for both arches at T0, T1 and T2. The accuracy of angular values was compared using Student's t-test against a hypothetical 100%, and among the various tooth groups by post-hoc tests. Transverse linear measurements were investigated by means of the non-parametric Friedman test. The significance threshold was set at 0.05. Results The mean accuracy of angular values was 77.25 ± 7.71% for torque, 78.41 ± 6.17% for tip and 77.99 ± 6.58% for rotation. In all cases, however, there was a significant difference between planned and achieved movements, and accuracy was significantly lower than the hypothetical 100% for all tooth groups, individual arches and dentition (p

Objectives To evaluate the efficacy of mandibular advancement devices (MADs) in improving apnea-hypopnea index (AHI) in positional obstructive sleep apnea (POSA), compared with a control group of nonpositional OSA (NPOSA) patients, from mild to very severe degree, in order to to find the main variables characterizing the examined group as potential predictors of treatment success.

The following prospective study has the aim of evaluating the efficiency of the F22 MAD (mandibular advancement device), a new oral device for the treatment of OSAS (Obstructive Sleep Apnea Syndrome) and snoring. Methods: AHI (apnea-hypopnea index), ODI (Oxygen Desaturation Index), snoring percentage, time spent in the supine position, and Epworth Sleepiness Scale score were evaluated in 19 patients with snoring, mild to moderate OSAS, or severe OSAS who declined CPAP (Continuous Positive Air Pressure) treatment, before and after the application of the F22 MAD. Results: The median value of AHI varied from 15.6 ± 10.7 to 5.7 ± 5.7; the median value of ODI varied from 13.4 ± 8.8 to 6.2 ± 5.2; the median value of the percentage of snoring varied from 30.7 ± 7 to 7.5 ± 10.8, except for the patient who has severe OSAS who increased their value. The value obtained by the self-completion of the ESS questionnaire (Epworth Sleepiness Scale) underwent a statistically significant variation, while clinically significant for 13\19 patients who obtained a reduction of the value >/= of 2 points. Conclusions: It is possible to conclude that the F22 MAD is effective in the treatment of patients with mild and moderate OSAS or simple snoring, reducing the polysomnographic outcomes with statistically and clinically significant results in terms of reduction of AHI, ODI and percentage of snoring.

This retrospective study aims to further investigate the effects of rapid maxillary expansion (RME) treatment on respiratory function in growing patients with contracted upper airways, by assessing nasal resistance using active anterior rhinomanometry (AAR). Methods: At T0 (pre-RME), 122 orthodontic patients aged 5 to 12 years, exhibiting oral breathing and/or snoring along with maxillary contraction, underwent AAR with a mask using the ATMOS Rhino 31 rhinomanometer. Additionally, the SRDB or PSQ-SRDB Questionnaire was utilized to validate the orthodontic history of obstructive sleep apnea syndrome (OSAS). If AAR results at T0 were clinically significant, they were repeated at T1, corresponding to a period of three months after screw fixation, to evaluate changes in nasal resistance values between pre- and post-treatment. Results: The study group comprised 42 oral respiratory patients with a mean age of 7.71 years, suspected of pediatric OSAS. Although the questionnaires did not yield statistically significant results, the therapy induced an overall reduction in airflow resistance values from both nostrils (−24.63% in the right nostril; −26.65% in the left nostril). Conclusions: This study demonstrates the beneficial effects of orthodontic treatment with RME on nasal function in terms of airflow resistance in cases of maxillary contraction.

Digitalization techniques, such as photogrammetry (PG), are attracting the interest of experts in the cultural heritage field, as they enable the creation of three-dimensional virtual replicas of historical artifacts with 2D digital images. Indeed, PG allows for acquiring data regarding the overall appearance of an artifact, its geometry, and its texture. Furthermore, among several image-based techniques exploited for the conservation of works of art, multispectral imaging (MSI) finds great application in the study of the materials of historical items, taking advantage of the different responses of materials when exposed to specific wavelengths. Despite their great usefulness, PG and MSI are often used as separate tools. Integrating radiometric and geometrical data can notably expand the information carried by a 3D model. Therefore, this paper presents a novel research methodology that enables the acquisition of multispectral 3D models, combining the outcomes of PG and MSI (Visible (VIS), Ultraviolet-induced Visible Luminescence (UVL), Ultraviolet-Reflected (UVR), and Ultraviolet-Reflected False Color (UVR-FC) imaging) in a single coordinate system, using an affordable tunable set-up and open-source software. The approach has been employed for the study of two wooden artifacts from the Museo Egizio di Torino to investigate the materials present on the surface and provide information that could support the design of suitable conservation treatments.

Objectives: The following retrospective study was devised with the aim of evaluating the correlation between OSAS and various anatomical factors. Material and Methods: Thirty-seven patients over the age of 40 were analyzed, of which 19 were classified as OSAS cases and 18 as control cases. For each, 17 anatomical variables were identified and examined using Invivo Dental software on CBCT scans, WebCeph software on laterolateral teleradiographs, and Rhinoceros 6.0 software on dental casts. Results: A generalized linear model of all the anatomical factors identified only two statistically significant variables. Specifically, the total volume of the palate displayed a inverse correlation with OSAS, while the distance between the S point and the Go point (S-Go) exhibited a direct correlation with the disease. Conclusion: The likelihood of an individual having OSAS appears to decrease as the volume of the palate increases but increase as the lingual measure S-Go increases.

Background: To investigate the accuracy of an F22 Aligner system, considering the amount of prescribed movement, tooth type, grip points, sex and age. Methods: Digital models of 120 patients (64 females and 56 males; mean age 35.2 years ± 7.4) affected by mild-to-moderate Class I malocclusion and treated via F22 Aligners, retrospectively selected from the University of Ferrara Orthodontics Clinic’s electronic database; post-treatment models were generated, and three angular values per tooth and four linear intra-arch measurements per arch were acquired. For angular measurements, planned (T1) and achieved (T2) values were obtained thorough digital model superimpositions. Linear measurements were acquired from pre-treatment, reference and post-treatment models. Statistical comparisons were performed to assess accuracy among tooth types and prescribed movements, tooth type, grip points, sex and age were investigated via chi-squared automatic interaction detection regression trees. Results: Mean accuracy for inclination and angulation were 86.76% and 88.01%, respectively, whereas rotation was less accurate (61.59%), especially for rounded teeth. All variables investigated influenced accuracy, with the exception of inclination, which was only influenced by age. Regarding linear measurements, good expansive capacity was shown, except for the distance between mandibular second premolars. Conclusions: F22 aligners are a viable solution for the treatment of Class I malocclusion of mild-to-moderate complexity, although clinicians should bear in mind the lower predictability of rotation, as well as the influence of the variables investigated.

Abstract Background Regardless of the treatment protocol, stability in Class III patients always represents a major concern. The aim of this study was to assess the short and long-term skeletal and dentoalveolar modifications in a group of class III patients treated with hybrid rapid maxillary expander (RME) and facemask (FM). Indeed, no long-term studies have been conducted yet with the objective of evaluating the effects of this kind of approach when applied to patients who have already gone thought their peak of growth. Material and methods 27 patients with skeletal Class III malocclusion were treated using hybrid RME according to alternating rapid maxillary expansion and constriction (ALT-RAMEC) protocol, followed by 4 months of facemask therapy. After the orthopaedic phase, each patient underwent orthodontic treatment with fixed multibracket appliances. A mean follow-up of 7 years, 10 months was performed. Pre-treatment (TO), post-treatment (T1) and follow up (T2) cephalometric tracing were analysed, comparing dental and skeletal measurements. Results Point A advanced by a mean of 3.5 mm with respect to VerT, then relapsed by 0.7 in the post-facemask period, thereby yielding of a mean advancement of 2.7 at T2. The sagittal relationship significantly changed after RME + facemask protraction (3.8° of ANB and 5.189 mm of Wits). Although both Wits and ANB values worsened over time, the improvement from T0 is still appreciable at T2. Conclusion Despite the physiological relapse due to mandibular growth, the long-term cephalometric follow-up confirms the maintenance of all positive outcomes of the previous orthopaedic treatment with hybrid RME and facemask.

Abstract Background The purpose of the present in vivo study was to compare the accuracy, in terms of trueness, between full-arch digital impressions of different intraoral scanning systems, using as a reference the ideality of the conventional impression technique. Methods Polyvinyl siloxane (PVS) two-step technique impressions of 27 subjects were taken, and the stone casts were scanned using desktop scanners R500 3Shape. For each arch, in vivo scans were taken with intraoral scanners Carestream CS3600, CEREC Omnicam and Trios 3Shape. All the files were compared, superimposing them on the reference model to calculate the total 3D and 2D deviations. The efficiency of the digital and conventional workflows was evaluated by measuring the work time in minutes. Statistical analyses were performed using R software (R Core Team 2020) with a p-value

ABSTRACT Introduction: Class III malocclusion should be intercepted and treated at early age, to prevent the necessity of future complex and expensive procedures. The orthopedic facemask therapy has the goal to achieve skeletal changes, minimizing side effects on dentition. The use of skeletal anchorage, combined with Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC) protocol, may be effective in treating a greater number of growing Class III patients. Objective: To summarize the existing evidence-based literature on Class III malocclusion treatment in young adult patients, and to illustrate its application and effectiveness, by presenting an emblematic case report. Conclusion: The resolution of the present case, its long-term follow up, along with the studies conducted on a larger sample, demonstrate the effectiveness of the strategic combination of orthopedic and orthodontic treatments by using an hybrid rapid palatal expander and Alt-RAMEC protocol for treating Class III malocclusions in adult patients.

Abstract Objective The stability of the transverse expansion in passive self-ligating bracket treatments is a debated topic in orthodontics. However, to date, only 3 reports are available in the literature, with the maximum follow-up of 3 years after the end of therapy. The present study aims to evaluate the stability of orthodontic treatment with self-ligating brackets in a 6-year follow-up period of time. Materials and methods A sample of 56 non-extractive cases (of whom 33 females, mean age 16.9, SD = 9.0 years) consecutively treated with Damon® system was retrospectively selected. All patients received fixed retainers from canine to canine in both arches at the end of treatment, and no removable retainers were provided. The mean values of the transverse intercusp, transverse centroid and transverse lingual distances were evaluated for all teeth from canines to second molars in both arches. Each measure was calculated at four timepoints: before treatment (T0), at the end of treatment (T1), one year after treatment (T2) and six years after treatment (T3). Transverse diameters were measured for all teeth, starting from the canines to the second molars, for a total of 1680 observations, and subsequently compared in order to evaluate intra-treatment and post-treatment modifications. Results There were increases in all transverse dental measurements during active treatment. A statistically significant (p

Abstract Background To compare the fluorescent properties of 6 different orthodontic adhesives and provide useful information for clinicians in the adhesion choice, in order to remove it easily at the end of orthodontic treatment by using the Fluorescence-aided Identification Technique (FIT). Methods Six orthodontic adhesives were included: Ortho Connect, Gradia LoFlo A3.5, Greengloo, Transbond XT, KommonBase Pink, and KommonBase Clear. The same thermoformed template with 1 mm shell thickness on the six anterior teeth was used for adhesive positioning; furthermore, an ultraviolet light-emitting diode flashlight was used for the FIT. The brightness of adhesive area and tooth area (L* color coordinate) were measured on the photographs by using the “color picker” tool of Photoshop software. Results GC Ortho Connect, Gradia Direct LoFlo and KommonBase Clear showed the highest differences of brightness (15.5, 16.3 and 13.5, respectively), while Greengloo, Transbond XT and KommonBase Pink registered similar values between resin area and tooth area with FIT (− 0.5, − 0.8 and − 1.0, respectively). The high viscosity adhesive resins, as Greengloo and Transbond XT, showed a similar performance in terms of fluorescence to the KommonBase Pink, the lowest viscous resin adhesive considered. Conclusions The most used orthodontic adhesives showed different fluorescence properties. Some resins were brighter with the FIT, facilitating identification and subsequent removal. Other orthodontic adhesives presented no difference between adhesive and tooth. The viscosity of orthodontic adhesives did not influence the brightness emitted with FIT.

(1) Background: Since 2013, the pathogenic bacterium Xylella fastidiosa has been severely affecting olive production in Apulia, Italy, with consequences for the economy, local culture, landscape and biodiversity. The production of a phenolic extract from fresh olive leaves was employed for endotherapeutic injection into naturally infected olive trees by Xylella fastidiosa in Apulia region, Italy. (2) Methods: The effectiveness of the extract was tested in vitro and in planta in comparison with analogous treatments based on garlic powder and potassium phosphite. (3) Results: The uptake of phenolic compounds from olive leaves through a trunk injection system device resulted in a statistically significant increase in leaf area index and leaf area density, as well as in the growth of newly formed healthy shoots. Plant growth-promoting effects were also observed for potassium phosphite. Moreover, the bacteriostatic activities of the phenolic extract and of the garlic-powder-based solution have been demonstrated in in vitro tests. (4) Conclusions: The results obtained and the contained costs of extraction make the endotherapeutic treatment with phenolic compounds a promising strategy for controlling X fastidiosa to be tested on a larger scale, although the experiments conducted in this study proved not to be suitable for centenary trees.

The aim of this paper is to perform an observational descriptive study of the Obstructive Sleep Apnea Syndrome (OSAS) in a population of children by evaluating the prevalence and role of sex and age variables. The 22-item Pediatric Sleep Questionnaire (PSQ) was administered to parents of children aged 3 to 12 years. The questionnaire is a very simple tool since it allows for the indication of patients with possible OSAS diagnosis through a cut-off of 0.33. The anonymous diagnostic questionnaire, available in digital format, was administered to the population under study by a link or QR code. Only the questionnaires completed in all their parts were recorded and analyzed. Eight hundred and thirty-two questionnaires were collected. One hundred and fifty-four subjects obtained a PSQ score > 0.33 and the prevalence of OSAS was 18.51%. The Chi-square test showed a statistically significant association between the PSQ score > 0.33 and male sex. The higher prevalence of subjects with a value of PSQ > 0.33 (n = 277) are aged 3–4–5 years, followed by the 6–7–8 range in the group with PSQ score > 0.33, p < 0.05. The prevalence of OSAS was 18.51% in children aged 3 to 12 years. The variables male biological sex and the age group 3–8 year were statistically significant for subjects with OSAS diagnosis. This study underlines the use of the 22-item Pediatric Sleep Questionnaire as a first screening tool to identify children at risk of OSAS.

Abstract Background The aim of this study is to compare the biomechanical effects of the conventional 0.019 × 0.025-in stainless steel archwire with the dual-section archwire when en-masse retraction is performed with sliding mechanics and skeletal anchorage. Methods Models of maxillary dentition equipped with the 0.019 × 0.025-in archwire and the dual-section archwire, whose anterior portion is 0.021 × 0.025-in and posterior portion is 0.018 × 0.025-in were constructed. Then, long-term tooth movement during en-masse retraction was simulated using the finite element method. Power arms of 8, 10, 12 and 14 mm length were employed to control anterior torque, and retraction forces of 2 N were applied with a direct skeletal anchorage. Results For achieving bodily movement of the incisors, power arms longer than 14 mm were required for the 0.019 × 0.025-in archwire, while between 8 and 10 mm for the dual-section archwire. The longer the power arms, the greater the counter-clockwise rotation of the occlusal plane was produced. Frictional resistance generated between the archwire and brackets and tubes on the posterior teeth was smaller than 5% of the retraction force of 2 N. Conclusions The use of dual-section archwire might bring some biomechanical advantages as it allows to apply retraction force at a considerable lower height, and with a reduced occlusal plane rotation, compared to the conventional archwire. Clinical studies are needed to confirm the present results.

Abstract Background To investigate and compare the gap (i.e. fit) and thickness of six aligner systems (Airnivol, ALL IN, Arc Angel, F22, Invisalign and Nuvola) using industrial computed tomography (CT). The null hypothesis was that there would be no detectable differences in either measurement between the aligners investigated. Materials and methods Passive aligners of each brand were fitted to one single resin cast prototyped from an STL file from a single patient. The samples obtained were examined under high-resolution micro-CT, and the resulting tomographic microphotographs and volumetric data were compared. 3D analysis investigated the gap volume, the mean gap width and the maximum gap width of each sample. A total of 204 linear 2D measurements were made on 18 microtomographic images to investigate the aligner gap and thickness among different systems. Investigated regions were the central incisor, canine and first molar. The resulting measurements were analysed by ANOVA and compared using Tukey’s post hoc analysis (P < 0.05). Results 3D analysis revealed that the F22 displayed lower gap volume and mean gap width, followed by Airnivol and Invisalign, whereas Airnivol the lowest maximum gap width. 2D analysis showed that F22 had the lowest mean gap and aligner thickness at all teeth investigated. Comparison of the 2D point values revealed statistically significant differences between brands in terms of both measurements (P < 0.05), with the exception of six points in the gap analysis and one in the thickness analysis. Conclusions There are differences between the six aligner systems examined in terms of 2D and 3D measurements of aligner thickness and gap.

The presence and infestation level of Bactrocera oleae was monitored in an organic olive orchard divided into differently treated parcels with kaolin (K), spinosad (S) and with kaolin and spinosad (K + S) in alternate rows. The treatments did not seem to affect olive fruit fly population dynamics, while statistically significant protective effects were recorded against total and harmful infestation, but not against the active one. Eventually, neither kaolin nor spinosad were shown to have a particular detrimental effect against naturally occurring B. oleae parasitoids.

Objective: To investigate the types of dental emergencies that occurred during the lockdown period in Italy (12th March—4th May) and to investigate future therapeutic preferences related to the use of different types of appliances. Material and Methods: A questionnaire dedicated to assessing dental emergencies during the lockdown period and surveying the resumption of orthodontic practice was submitted to clinicians in digital form. The first part of the questionnaire, focused on the orthodontic emergencies that were encountered in relation to the different types of orthodontic appliances and how these were resolved. The second part of the questionnaire was devoted to the resumption of clinical practice; in particular, it was designed to assess whether and what percentage of clinicians are willing to change the duration of appointments in relation to the different types of appliance used, asking them whether their approach to orthodontic treatment would change in the coming months as compared to the pre-COVID-19 era. Results: Results show that in most cases (82%), the percentage of patients who experienced a dental emergency was less than 5% and that far fewer emergencies were attributable to removable (5.7%) than to fixed appliances (94.3%). Looking ahead, clinicians expressed a greater preference for using removable (60.8%) rather than fixed appliances (39.2%). Conclusion: During the lockdown, there relatively few orthodontic emergencies, many of which were handled by telephone consultation. However, a far lower percentage of emergencies were generated by removable (e.g., clear aligners) as opposed to fixed appliances (e.g., multibracket equipment), likely influencing the decision of the majority of clinicians to opt for removable appliances in the wake of the COVID-19 pandemic.

(1) Background: the aim of this study was to investigate the transmittance levels of aligners in relation to different thermoforming disks and printers after 14 days of in vitro aging. (2) Methods: the transmittance level of 18 aligners was investigated. Three printers were used to create the aligner: Carbon L1, Prodways LD20 and RapidShape D100+. Each printer produced 6 aligners: three were made of Zendura FLX material and three of Scheu Ca Pro+. Each sample was subjected to spectrophotometry analysis of its transmittance levels, for a total of 54 measurements at T0. Then, all samples were aged in vitro at a constant temperature in artificial saliva supplemented with food coloring for 14 days each. The spectrophotometry protocol was repeated, and the same 54 measurements were collected at T1 (after aging). The resulting data were analyzed and compared by means of ANOVA (p < 0.05). (3) Results: all tested aligners revealed lower transmittance values after aging. Scheu CA Pro+ aligners showed higher transparency at T0, but a significant worsening of its aesthetic at T1. On the other hand, Zendura FLX aligners presented slightly reduced transmittance levels before aging, which, however, remained more stable after 14 days, showing no significant difference. In the specific, aligners produced by Prodways LD20 printers showed better optical properties than the others, both at T0 and T1. (4) Conclusions: Differences in pre-and-post-aging optical properties of aligners are influenced by the manufacturing process. Both the thermoplastic disks and the printers, thanks to new technologies, played a positive role in the final transparency of the product, which improved in all values compared to previous studies.

Aims: The purpose of this study was to evaluate the accuracy of the slot height of in-house 3D-printed resin brackets, comparing them with other types of brackets on the market today, both ceramic and metallic. Methods: Seven different types of bracket systems were selected. For each system, ten brackets for tooth 2.1 with 0.022 × 0.028-inch slots were selected (total n° 70). Considering the whole sample, five types were commercially available and two were in-house 3D-printed. The entire sample was divided into four different groups according to the bracket material and the method of holding the archwire. Precision pin gauges with 0.002-mm increments were inserted inside the slot of each bracket, and the slot heights were measured, microscopically ensuring that the gauge completely filled the slot, with full contact between both the bottom and the top of the slot. Results: With respect to the other five types of brackets on the market, the two types of in-house 3D-printed resin brackets showed great accuracy of slot height (0.558 ± 0.001 mm). There was a statistically significant difference between the real height measured and the nominal height declared by the manufacturers (p < 0.05) of all the samples investigated, with the exception of in-house 3D-printed resin brackets. Furthermore, the difference in slot height accuracy between commercially manufactured and in-house 3D-printed resin brackets was statistically significant. Conclusions: In-house 3D-printed resin brackets have a remarkably precise slot height, unlike commercially available brackets, whose slot heights tend to be significantly oversized with respect to the nominal values declared by the manufacturers.

Abstract Objectives The aim of this study is to investigate and compare the characteristics of as received and retrieved NiTi archwires at a constant temperature by plotting their load/deflection graphs and quantifying three parameters describing the discharge plateau phase. Materials and methods Two hundred four NiTi archwires, traditional and heat-activated, of various cross sections, were obtained from 5 different manufacturers. Specimens prepared from the selected wires were subjected to a three-point bending test where 92 were retrieved through an in vivo retrieval protocol (crowding group C1 and group C2), 56 went through an in vitro retrieval protocol, and 56 were as received. The in vitro retrieval protocol was performed by a gear motor connected to a stainless steel support that performed fatigue cycles to the bent wires in artificial saliva. The load/deflection graphs of as received and retrieved wires were described through three parameters and the results were analyzed with classification and regression trees (CART) and analysis of variance (ANOVA). Results Statistically significant differences between as received and retrieved wires were found only for the parameter plateau slope which represents the constancy of force expressed by the wire. Conclusions The aging of NiTi archwires influences the force constancy expressed. The behavior of the wires changes depending on the size, brand, and type of retrieval protocol. In terms of performance, the poorest is represented by all wires retrieved in vitro and in vivo group C2 (moderate to severe crowding).

We aimed to investigate the stress relaxation properties of five different thermoplastic aligner materials subjected to 14 days of constant deflection. Five different thermoplastic aligner materials were selected, whose elastic properties varied: F22 Evoflex, F22 Aligner, Durasoft, Erkoloc-Pro and Duran. The static properties of these materials—in particular, stiffness, stress–strain curve and yield stress—were measured with a three-point bending test. For all the tests that were performed, a minimum of three samples per material were tested. The yield load, yield strength, deformation and particularly the stiffness of each material were found to be similar in the single-layer samples, while the double-layer samples showed far lower stiffness values and were similar one to another. F22 Evoflex and Erkoloc-Pro maintained the highest percentages of stress, 39.2% and 36.9%, respectively, during the 15-day period. Duran and Durasoft obtained the lowest final stress values, 0.5 MPa and 0.4 MPa, respectively, and the lowest percentage of normalized stress, 4.6% and 3.9%, respectively, during the 15-day period. All the materials that we tested showed a rapidity of stress decay during the first few hours of application, before reaching a plateau phase. The F22 Evoflex material showed the greatest level of final stress, with relatively constant stress release during the entire 15-day period. Further research after in vivo aging is necessary in order to study the real aligners’ behavior during orthodontic treatment.

Objective: The purpose of this retrospective preliminary study was to analyze the skeletal and dentoalveolar effects of a new clear functional appliance in a sample of patients close to growth spurt with class II malocclusion attributable to mandibular retrusion. Materials and methods: A sample of growing patients underwent functional Class II correction using F22® (Sweden and Martina, Due Carrare (PD), Italy) Young, realized combining the aesthetic characteristics of the F22® clear aligner with the structural features of a functional appliance. For each patient, a digital setup was performed by a single operator to plan a mandibular advancement to the therapeutic position. Cephalometric analysis before and after treatment was performed. The purpose of the statistical analysis was to evaluate dental and skeletal changes associated with F22® Young device, and whether there were statistically significant differences in anatomical measurements between the beginning and end of treatment. Results: 15 patients, 7 females and 8 males of average age 10.3, were treated with the F22® Young appliance for an average period of 10 months ± 0.5 (maximum 11.5 months, minimum 10.5 months). The data showed that the SNB angle increase was statistically significant from T0 to T1, leading to a reduction in the ANB angle. Values for the mandible length, both total (Co-Gn) and at the base (Go-Pg), significantly increased. Conclusions: According to this preliminary study, F22® Young appliance is effective in promoting mandibular advancement when used near the pubertal growth peak. The device is comfortable and aesthetic, which certainly promoted patient compliance, a key factor for treatment success.

Olive (Olea europaea L.) is an evergreen xerophytic tree characterizing vegetative landscape and historical-cultural identity of the Mediterranean Basin. More than 2600 cultivars constitute the rich genetic patrimony of the species cultivated in approximately 60 countries. As a subtropical species, the olive tree is quite sensitive to low temperatures, and air temperature is the most critical environmental factor limiting olive tree growth and production. In this present review, we explored the detrimental effects caused of low temperatures on olive cultivars, and analyzed the most frequently experimental procedures used to evaluate cold stress. Then, current findings freezing stress physiology and gene are summarized in olive tree, with an emphasis on adaptive mechanisms for cold tolerance. This review might clear the way for new research on adaptive mechanisms for cold acclimation and for improvement of olive growing management.

The aim of the present study is to represent the orthodontic treatment of a young patient with a skeletal Class III malocclusion(Wits Appraisal −9 mm), in which the extractions of the first lower premolars were performed to obtain a class III camouflage using direct temporary anchorage devices (TADs). The patient reported a history of three years of orthodontic treatment at another clinic and the radiographic evaluation revealed an important impairment of the upper root incisors. A treatment was performed with a fixed appliance in the upper and lower arches using an archwire sequence of 0.16 CuNiTi, 19 × 25 CuNiTi, 19 × 25 SS and was carried out in 18 months. Post-treatment records of our patient show a control of facial esthetics from the frontal and lateral perspectives, with a harmonious soft-tissue profile. A Class I canine was achieved and her overbite and overjet were normalized by retracting the mandibular anterior teeth and carrying out a bodily mesialization of the posterior sector into the extraction space. In conclusion, the “pseudoankylosis system” used in this case allowed the desired result to be achieved with minimal change to the lower incisal inclination and without overloading the anterior upper and lower sectors, thus reducing the risk of further root resorption and patient compliance.

Abstract Background To describe an esthetic orthodontic treatment using aligners in an adult patient with class II subdivision associated with crowding and dental crossbite. An 18-year-old hyperdivergent male patient with skeletal class II from mandibular retrusion presented for an orthodontic treatment. Occlusally, the patient presents class II subdivision, crossbite at tooth 4.4, an upper midline deviated towards the left with respect to the lower and facial midlines, and slight crowding in both arches. The patient refused conventional fixed multibracket treatment in favor of aligners. Pre- and post-treatment records as well as 1-year follow-up records are presented. Findings Treatment objectives were achieved in 12 months, and the patient was satisfied with the functional and esthetic outcomes, which were stable at 1 year. Conclusion Combining aligners with appropriate auxiliaries is an efficacious means of resolving orthodontic issues such as class II, dental crossbite, and crowding in a time-frame comparable to that of conventional fixed orthodontics. Furthermore, this system is associated with optimal oral hygiene and excellent esthetics.

Abstract Background This study aims to evaluate if invisible orthodontic retainers can affect sleep-time masticatory muscle activity (sMMA) over a short-term period in healthy individuals. Methods Nineteen (N = 19) healthy subjects underwent an in-home evaluation with a portable device for electromyographic (EMG) assessment. The study protocol provided two baseline recording nights, a night off, and then two additional nights with passive customized orthodontic retainers in situ. For each recording night, the sleep bruxism (SB) index (i.e., average number of SB events/hour) and the overall number of masseter muscle contractions were assessed. Comparison between values gathered over the four recording nights was made with a parametric test, based on the null hypothesis that there was no difference between wearing or not wearing the retainers as far as the sMMA variables are concerned. Results Average SB index of the first two nights without the retainers was 3.0 ± 1.5, whilst the average values with the retainers in situ was 3.6 ± 1.9. ANOVA test showed the absence of significant differences between the four nights. Similarly, no differences were shown between the four nights as for the total number of sMMA events. Based on that, the null hypothesis was not rejected. Conclusions Findings suggest the absence of relevant effects of invisible orthodontic retainers on sMMA in healthy individuals during the short-term period.

Abstract Background The aim of this study was to evaluate the predictability of F22 aligners (Sweden & Martina, Due Carrare, Italy) in guiding teeth into the positions planned using digital orthodontic setup. Methods Sixteen adult patients (6 males and 10 females, mean age 28 years 7 months) were selected, and a total of 345 teeth were analysed. Pre-treatment, ideal post-treatment—as planned on digital setup—and real post-treatment models were analysed using VAM software (Vectra, Canfield Scientific, Fairfield, NJ, USA). Prescribed and real rotation, mesiodistal tip and vestibulolingual tip were calculated for each tooth and, subsequently, analysed by tooth type (right and left upper and lower incisors, canines, premolars and molars) to identify the mean error and accuracy of each type of movement achieved with the aligner with respect to those planned using the setup. Results The mean predictability of movements achieved using F22 aligners was 73.6%. Mesiodistal tipping showed the most predictability, at 82.5% with respect to the ideal; this was followed by vestibulolingual tipping (72.9%) and finally rotation (66.8%). In particular, mesiodistal tip on the upper molars and lower premolars were achieved with the most predictability (93.4 and 96.7%, respectively), while rotation on the lower canines was the least efficaciously achieved (54.2%). Conclusions Without the use of auxiliaries, orthodontic aligners are unable to achieve programmed movement with 100% predictability. In particular, although tipping movements were efficaciously achieved, especially at the molars and premolars, rotation of the lower canines was an extremely unpredictable movement.

Abstract Background The orthodontics industry has paid great attention to the aesthetics of orthodontic appliances, seeking to make them as invisible as possible. There are several advantages to clear aligner systems, including aesthetics, comfort, chairside time reduction, and the fact that they can be removed for meals and oral hygiene procedures. Methods Five patients were each given a series of F22 aligners, each to be worn for 14 days and nights, with the exception of meal and brushing times. Patients were instructed to clean each aligner using a prescribed strategy, and sections of the used aligners were observed under SEM. One grey-scale SEM image was saved per aligner in JPEG format with an 8-bit colour depth, and a total of 45 measurements on the grey scale (“Value” variable) were made. This dataset was analysed statistically via repeated measures ANOVA to determine the effect of each of the nine cleaning strategies in each of the five patients. Results A statistically significant difference in the efficacy of the cleaning strategies was detected. Specifically, rinsing with water alone was significantly less efficacious, and a combination of cationic detergent solution and ultrasonication was significantly more efficacious than the other methods (p

Xylella fastidiosa subsp. pauca, strain CoDiRO is the bacterium responsible for the onset of the disease known as the olive quick decline syndrome, which has been causing a phytosanitary and economic emergency in the Apulia region since 2013. To date, three insect species have been identified as pathogenic carriers of X. fastidiosa. With the advancement of the infection front, and the possibility of pathogenic insects being “hitchhiked” over long distances, the monitoring of the vectors of X. fastidiosa in the Italian regions bordering Apulia is an increasingly contingent issue for the rapid containment of the bacterium and the protection of the olive-growing heritage. Accordingly, the present research concerned the capture and recognition of the vector insects of X. fastidiosa in the upper Ionian coasts of Calabria (Italy) to evaluate the possible presence of the bacterium through molecular diagnostic techniques. The sampling allowed us to ascertain the presence of Philaenus spumarius and Neophilaenus campestris and their preferential distribution in olive groves and meadows, whereas all the 563 individuals tested negative for the pathogen.

The Italian extra virgin olive oil supply chain has considerable potential for embarking on a path of sustainable development and evolution. In Italy, the great variety heritage and the different pedo-climatic characteristics result in local olive growing systems with different management techniques, producing extra virgin olive oils that are strictly entwined to the territory, with peculiar qualitative properties. Nevertheless, numerous criticalities have been traditionally eroding the competitiveness of Italian olive growing that could find in sustainability certifications, a lasting driver of value creation. Shared standardizations and certifications that include the three pillars of sustainability are therefore necessary for the development of the process.

Abstract Background The aim of this study is to evaluate the mechanical properties of the screws used for rapid expansion of the upper jaw. Methods Ten types of expansion screw were assessed, seven with four arms: Lancer Philosophy 1, Dentaurum Hyrax Click Medium, Forestadent Anatomic Expander type “S”, Forestadent Anatomic Expander type “S” for narrow palates, Forestadent Memory, Leone A 2620-10 with telescopic guide, and Leone A 0630-10 with orthogonal arms; and three with two arms: Dentaurum Variety S.P., Target Baby REP Veltri, and Leone A 362113. A test expander with the mean dimensions taken from measurements on a sample of 100 expanders was constructed for each screw. The test expanders were connected to the supports of an Instron 4467 (Instron Corp., USA) mechanical testing machine equipped with a 500 N load cell, and the compression force exerted after each activation was measured. The mean forces expressed by the two- and four-arm expanders were then compared. Results After five activations, the forces expressed by the two-arm devices were double than those expressed by the four-arm devices on average (224 ± 59.9 N vs. 103 ± 32.9 N), and such values remained high after subsequent activations. Conclusions The expanders tested demonstrated stiffness characteristics compatible with opening of the palatine sutures in pre-adolescent patients. The stiffness of such devices can be further increased during the construction phase.

Abstract Background The aim of this study is to investigate the relative stiffness of straight and mushroom lingual archwires of different diameters, cross sections and alloys, plotting their load/deflection graphs and using a modified three-point bending test. Methods Fujita’s mushroom archwires and straight lingual archwires of different diameters, cross sections and alloys were derived by a virtual set-up of an equal malocclusion and were cut at their straight distal portion. These distal portions were tested using a modified three-point bending test by an Instron 4467 dynamometer and the forces, were exerted at 1-mm deflection and were compared on each resulting load/deflection curve by means of ANOVA (p

Abstract Background The treatment options for the early treatment of anterior open bite are still controversial. The aim of this study was to evaluate the actual available evidence on treatments of anterior open bite in the mixed dentition in order to assess the effectiveness of the early treatment in reducing open bite, the most efficacious treatment strategy and the stability of the results. Materials and methods A literature survey was done on November 15, 2015, by means of appropriate Medical Subject Headings (MeSH) using the following databases: PubMed, EMBASE, Cochrane Library, LILACS, VHL, and WEB OF SCIENCE. Randomized clinical trials and studies with a control group (treated or untreated) were then selected by two authors. Trials including patients with syndromes or in the permanent dentition and studies concerning treatment with extractions, full-fixed appliances, or surgery were not considered. Full articles were retrieved for abstracts or titles that met the initial inclusion criteria or lacked sufficient detail for immediate exclusion. Results Two thousand five hundred sixty-nine studies about open bite were available; the search strategy selected 240 of them. Twenty-four articles have been judged suitably for the final review, and their relevant data were analyzed. Discussion Although this review confirms the effectiveness of early treatment of open bite, particularly when no-compliance strategies are employed, meta-analysis was unfeasible due to lack of standardization, important methodological limitations, and shortcomings of the studies. Conclusions A more robust approach to trial design in terms of methodology and error analysis is needed. Besides, more studies with longer periods of follow-up are required.

Objectives: This study aimed to assess frequency and multiple-night variability of sleep bruxism (SB) as well as sleep-time masticatory muscle activities (sMMA) in the home environment in healthy young adults using a portable device that provides electrocardiographic (ECG) and surface electromyographic (EMG) recordings from the masticatory muscles. Methods: The study was performed on 27 subjects (11 males, 16 females; mean age 28.3 ± 1.7 years) selected from a sample of healthy young students. Evaluation was carried out for four nights to record data on masticatory muscle activities using a compact portable device that previously showed an excellent agreement with polysomnography (PSG) for the detection of SB events. The number of SB episodes per sleep hour (bruxism index), and the number of tonic, phasic and mixed sMMA events per hour were assessed. A descriptive evaluation of the frequency of each condition was performed on all individuals, and gender comparison was investigated. Results: Mean sleep duration over the four recording nights was 7 ± 1.3 h. The average SB index was 3.6 ± 1.2. Most of the sMMA were tonic (49.9%) and phasic (44.1%). An ANOVA test showed the absence of significant differences between the four nights. No significant gender differences were detected for the SB index, phasic or tonic contractions; conversely, gender differences were detected for mixed sMMA events (p < 0.05). Conclusion: This investigation supports the concept that sMMA events are quite frequent in healthy adults. Differences over the four-night recording span were not significant. These data could be compared to subjects with underlying conditions that may lead to an additive bruxism activity and possible clinical consequences.

INTRODUCTION: This study aims to determine the shape and dimension of dental arches from a lingual perspective, and determine shape and size of a straight archwire used for lingual Orthodontics. METHODS: The study sample comprised 70 Caucasian Brazilian individuals with normal occlusion and at least four of Andrew's six keys. Maxillary and mandibular dental casts were digitized (3D) and the images were analyzed by Delcam Power SHAPET 2010 software. Landmarks on the lingual surface of teeth were selected and 14 measurements were calculated to determine the shape and size of dental arches. RESULTS: Shapiro-Wilk test determined small arch shape by means of 25th percentile (P25%) - an average percentile for the medium arch; and a large one determined by means of 75th percentile (P75%). T-test revealed differences between males and females in the size of 12 dental arches. CONCLUSION: The straight-wire arch shape used in the lingual straight wire technique is a parabolic-shaped arch, slightly flattened on its anterior portion. Due to similarity among dental arch sizes shown by males and females, a more simplified diagram chart was designed.

This work was designed to investigate the effect of mechanical tillage on glomalin content, arbuscular mycorrhizal fungi (AMF) abundance and diversity, and the concentration of water stable aggregates (WSA), in two adjacent olive groves located in Basilicata (Italy) that were managed over the course of 11 years in accordance with different horticultural models (conventional and sustainable). Soil sampling was performed at four depths between the trees within a row and between rows. In the end, WSA was found to be a highly sensitive indicator (especially in the “macro” fraction) of the effect of management on soil structure, showing the highest statistically significant values within the sustainable system. In the same regard, the diversity of the AM fungal community was negatively affected by conventional practices; on the other hand, a higher concentration of glomalin in the first 20 cm layer of the conventional system is here reported for the first time, as a likely result of disruption of the mycelium provoked by the mechanical tillage.

The primary impetus behind this research was to provide a boost to the characterization of the Italian olive biodiversity by acquiring reliable and homogeneous data over the course of an eight-year trial on the floral and fruiting biology of 120 molecularly analyzed cultivars, most of which have either low or very low diffusion. The obtained data highlighted a considerable variability to almost all of the analyzed parameters, which given the uniformity of environment and crop management was indicative of a large genetic variability in the accessions under observation, as confirmed through the molecular analysis. Several cases of synonymy were reported for the first time, even among plants cultivated in different regions, whilst all of the varieties examined, with only one exception, showed very low percentages of self-fruit-set, indicating a need for the employment of suitable pollinator plants. Eventually, a fitted model allowed us to evaluate the clear effects of the thermal values on blossoming, particularly in the months of March and April, whereas the climatic conditions during the flowering time had only a modest effect on its duration.

The analysis of forces, moments and pressure points has long been of great interest in orthodontics. Hence, we set out to define a method for measuring the pressure exerted by aligners on the teeth, and specifically to identify the precise points of pressure exertion. Intraoral scans were performed on a patient with optimal alignment and levelling before and after 2º vestibularisation of the upper central incisor. Pressure sensor film was placed in a dedicated housing between the aligner and teeth in order to record the pressure exerted after 15 s of aligner application. The images captured by the film were scanned, digitised, and subsequently analysed. Areas and amounts of pressure generated by the aligners were evaluated, and the net force of each was calculated, adjusted to take into consideration passive values. The method revealed the areas of contact by which the aligner transmits force on the teeth, and the pressures at which it does so. The pressure exerted by an aligner is not evenly distributed across the entire surface of the tooth during lingual tipping of an upper incisor. The areas of force concentration were not identical, as these are influenced by factors resulting from the manufacturing and casting processes.