Search

A commonly used strategy to improve aerosolization behavior of carrier-based dry powder inhalers (DPIs) is the addition of magnesium stearate as a lubricant, yet it may also negatively affect properties of DPIs. Thus, the aim of this study was to find lubricants that could be used as alternatives of magnesium stearate and meanwhile verify the applicability of using powder rheological properties to predict the performance of different lubricants in DPIs. Here, using fluticasone propionate as a model drug, LH200 as the carrier, influence of lubricants type and particle size, including magnesium stearate, sodium stearate, Leucine, sodium stearate fumarate, Compritol® 888 ATO, and Compritol® HD5 ATO, on the physicochemical properties, powder rheology and aerosolization behavior of the DPI formulations was characterized. Further, the relationship between powder rheological parameters and in-vitro drug deposition parameter, fine particle fraction (FPF), were explored, and the contribution of powder flowability and adhesion was evaluated using principal component analysis (PCA). The results showed that magnesium stearate, sodium stearate and smaller sized leucine significantly reduced the basic flowability energy, aeration energy and Permeability of the DPI formulations, leading to improved aerosolization behavior. A robust linear correlation was established between rheological parameters and FPF. PCA showed that in lubricants containing formulations, the contribution of flowability (74.69%) was greater than that of adhesion (25.31%). In conclusion, sodium stearate and smaller particle size Leucine can be considered as substitutes of magnesium stearate in DPI formulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Powder blending is a critical step in pharmaceutical manufacturing that can impact product quality such as tablet tensile strength. This study utilized the Discrete Element Method (DEM) to investigate blending in a 5-liter mini-batch and a 2-liter Turbula blender. DEM parameters were calibrated using small-scale powder characterization tests, so that the particle behavior in the DEM simulations matches the measured behavior. The research explored the effects of blender designs and process conditions on blending and lubricant dispersion. A predictive model for tablet tensile strength was developed. The model takes the lubricant's dispersion via the lubrication energy into account. The model is then used to predict the tablet tensile strength depending on the chosen process parameters, blending speed, duration, and fill level. DEM simulations enabled scaling between the two blenders, providing valuable insights for a semi-continuous manufacturing process based on mini-batch blending. The findings contribute to a deeper understanding of blending mechanics, offering potential enhancements in pharmaceutical manufacturing efficiency and product consistency., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Magnesium stearate (MgSt) is a common tablet lubricant. As variations in MgSt properties are known to influence tablet attributes, the impact of MgSt fatty acid composition, particularly the significance of the stearate and palmitate contents, and its effects on tablet properties warrant further investigation. This study investigated the effect of MgSt with different stearate and palmitate contents but comparable physical properties (e.g. particle size, crystallinity, specific surface area and morphology) on lubrication performance and resulting tablet quality attributes, including mechanical strength, disintegratability and drug release. The influence of MgSt concentration and blending duration on the resulting tablet properties was also examined. Tablets produced using the lower stearate content MgSt had slightly higher tensile strength. The effect of MgSt stearate content was more apparent in the disintegration time and drug release, whereby MgSt of lower stearate content resulted in tablets with longer disintegration time and slower drug release. The lower stearate content also resulted in a lower lubrication performance, leading to a lesser reduction in tablet ejection force. As expected, a longer blending time of the tablet formulation blend with MgSt yielded tablets with reduced tensile strength, shorter disintegration time and slower drug release. Tablets with higher MgSt concentration showed a greater reduction in tensile strength, longer disintegration time and faster drug release. The study findings reinforced observations by other researchers and provided a better understanding of the fatty acid composition effects of MgSt on lubrication performance and the resulting tablet properties., (© 2024. The Author(s).)

The effects of lecithin addition on the properties of konjac glucomannan (KGM) hydrogels prepared by controlled heating were investigated. Weak hydrogels were formed at 1 % KGM, which contained relatively thick strands. The shear viscosity and shear modulus of the hydrogels increased with increasing KGM concentration. The pure KGM hydrogels exhibited relatively poor boundary lubrication at all polysaccharide concentrations studied. The inclusion of lecithin (0.001 % to 0.20 %) in the KGM hydrogels appreciably altered their rheological properties, which could be modulated by varying the lecithin/KGM ratio. Microstructural analysis showed that lecithin caused a substantial restructuring of the strands in the hydrogel network. Lecithin was also found to be a highly effective lubricant in the KGM hydrogels. Incorporation of trace amounts of lecithin led to a significant improvement in the lubricating properties of the KGM hydrogels, especially boundary lubrication. Fourier transform infrared (FTIR) and differential canning calorimetry (DSC) analyses provided information about the molecular interactions between the lecithin and KGM molecules. The ability of lecithin to increase the lubricating performance of the KGM hydrogels was mainly attributed to the adsorption of phospholipid-biopolymer complexes onto solid surfaces, which reduced the friction between them., Competing Interests: Declaration of competing interest The authors declare that they have no competing financial interests or personal relationships that could influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Osteoarthritis is a degenerative joint disease that is associated with decreased synovial fluid viscosity and increased cartilage friction. Though viscosupplements are available for decades, their clinical efficacy is limited and there is ample need for more effective joint lubricants. This study first evaluates the tribological and biochemical properties of bovine articular cartilage explants after stimulation with the inflammatory cytokine interleukin-1β. This model is then used to investigate the tribological potential of carboxybetaine (CBAA)-based zwitterionic polymers of linear and bottlebrush architecture. Due to their affinity for cartilage tissue, these polymers form a highly hydrated surface layer that decreases friction under high load in the boundary lubrication regime. For linear pCBAA, these benefits are retained over several weeks and the relaxation time of cartilage explants under compression is furthermore decreased, thereby potentially boosting the weeping lubrication mechanism. Bottlebrush bb-pCBAA shows smaller benefits under boundary lubrication but is more viscous than linear pCBAA, therefore providing better lubrication under low load in the fluid-film regime and enabling a longer residence time to bind to the cartilage surface. Showing how CBAA-based polymers restore the lost lubrication mechanisms during inflammation can inspire the next steps toward more effective joint lubricants in the future., (© 2024 The Author(s). Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Lubricant-infused slippery surfaces have recently emerged as promising antifouling coatings, showing potential against proteins, cells, and marine mussels. However, a comprehensive understanding of the molecular binding behaviors and interaction strength of foulants to these surfaces is lacking. In this work, mussel-inspired chemistry based on catechol-containing chemicals including 3,4-dihydroxyphenylalanine (DOPA) and polydopamine (PDA) is employed to investigate the antifouling performance and repellence mechanisms of fluorinated-based slippery surface, and the correlated interaction mechanisms are probed using atomic force microscopy (AFM). Intermolecular force measurements and deposition experiments between PDA and the surface reveal the ability of lubricant film to inhibit the contact of PDA particles with the substrate. Moreover, the binding mechanisms and bond dissociation energy between a single DOPA moiety and the lubricant-infused slippery surface are quantitatively investigated employing single-molecule force spectroscopy based on AFM (SM-AFM), which reveal that the infused lubricant layer can remarkably influence the dissociation forces and weaken the binding strength between DOPA and underneath per-fluorinated monolayer surface. This work provides new nanomechanical insights into the fundamental antifouling mechanisms of the lubricant-infused slippery surfaces against mussel-derived adhesive chemicals, with important implications for the design of lubricant-infused materials and other novel antifouling platforms for various bioengineering and engineering applications., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Lubricin, secreted primarily by chondrocytes, plays a critical role in maintaining the function of the cartilage lubrication system. However, both external factors such as friction and internal factors like oxidative stress can disrupt this system, leading to osteoarthritis. Inspired by lubricin, a lubricating nanozyme, that is, Poly-2-acrylamide-2-methylpropanesulfonic acid sodium salt-grafted aminofullerene, is developed to restore the cartilage lubrication system using an "In-Out" strategy. The "Out" aspect involves reducing friction through a combination of hydration lubrication and ball-bearing lubrication. Simultaneously, the "In" aspect aims to mitigate oxidative stress by reducing free radical, increasing autophagy, and improving the mitochondrial respiratory chain. This results in reduced chondrocyte senescence and increased lubricin production, enhancing the natural lubrication ability of cartilage. Transcriptome sequencing and Western blot results demonstrate that it enhances the functionality of mitochondrial respiratory chain complexes I, III, and V, thereby improving mitochondrial function in chondrocytes. In vitro and in vivo experiments show that the lubricating nanozymes reduce cartilage wear, improve chondrocyte senescence, and mitigate oxidative stress damage, thereby mitigating the progression of osteoarthritis. These findings provide novel insights into treating diseases associated with oxidative stress and frictional damage, such as osteoarthritis, and set the stage for future research and development of therapeutic interventions., (© 2024 Wiley‐VCH GmbH.)

The growing concern and limitations for existing lubricants have driven the need for biolubricants, extensively proposed as the most suitable and sustainable lubricating oils. Biolubricant refers to lubricants that quickly biodegrade and are non-toxic to humans and aquatic habitats. Over the last decade, there has been a significant increase in the production of biolubricants due to the rising demand for replacing petroleum-based lubricants with those derived from renewable sources like vegetable oils and lipase that are used in various applications. In this study biodiesel (FAME) produced from blending animal fats and waste cooking was used as a raw material with ethylene glycol for biolubricant production using a transesterification reaction in the presence of calcium oxide which considers the newest and novel part as there is no production of biolubricant from animal fats and waste cooking oil in previous researches. The reaction parameters of biolubricant production were optimized using response surface methodology (RSM) with the aid of Box Behnken Design (BBD) to study the effect of independent variables on the yield of biolubricant. These variables are temperature ranging from (100-150 °C), reaction time ranging from 1 to 4 h, and FAME (Fatty Acid Methyl Ester) to alcohol molar ratio ranging from (2:1) to (4:1). The highest biolubricant yield is 91.56% at a temperature of 141 °C, a FAME/alcohol molar ratio of 2:1, and 3.3 h. Various analyses were performed on the produced biolubricant at the optimum conditions. The results include a pour point of -9 °C, a flash point of 192 °C, a kinematic viscosity at 40 °C of 10.35 cSt, a viscosity index of 183.6, an ash content of 0.76 wt.%, and a carbon residue of 1.5 wt.%, comparing favorably with the ISO VG 10 standard. The production process of biolubricant was simulated with Aspen Plus version 11 using a Non-Random Two-Liquid (NRTL) fluid package. The simulation results indicated that the production process can be applied on an industrial scale. Economic analysis was performed on the biolubricants production plant. The total capital investment was $12.7 M with a payback period of 1.48 years and an internal rate of return (IRR) of 67.5% indicating the suitability and profitability of the biolubricant production., (© 2024. The Author(s).)

Catheter-related infections are one of the most common nosocomial infections with increasing morbidity and mortality, and robust antibacterial or antifouling catheter coatings remain great challenges for long-term implantation. Herein, multifunctional hydrogel coatings were developed to provide persistent and self-adaptive antifouling and antibacterial effects with self-healing and lubricant capabilities. Polyvinyl alcohol (PVA) with β-cyclodextrin (β-CD) grafts (PVA-Cd) and 4-arm polyethylene glycol (PEG) with adamantane and quaternary ammonium compound (QAC) terminals (QA-PEG-Ad) were crosslinked through host-guest recognitions between adamantane and β-CD moieties to acquire PVEQ coatings. In response to bacterial infections, QACs exhibit reversible transformation between zwitterions (pH 7.4) and cationic lactones (pH 5.5) to generate on-demand bactericidal effect. Highly hydrophilic PEG/PVA backbones and zwitterionic QACs build a lubricate surface and decrease the friction coefficient 10 times compared with that of bare catheters. The antifouling hydrated layer significantly inhibits blood protein adsorption and platelet activation and reveals negligible hemolysis and cytotoxicity. The dynamic host-guest crosslinking achieves full self-healing of cracks in PVEQ hydrogels, and the mechanical profiles were recovered to over 90 % after rejuvenating the broken hydrogels, exhibiting a long-term stability after mechanical stretching, twisting, knotting and compression. After subcutaneous implantation and local bacterial infection, the retrieved PVEQ-coated catheters display no tissue adhesion and 3 log folds lower bacterial number than that of bare catheters. PVEQ coatings effectively prevent the repeated bacterial infections and there are few inflammatory reactions in the surrounding tissue, while substantial lymphoid infiltration and inflammatory cell aggregation occur in muscle tissues around the bare catheter. Thus, this study demonstrates a catheter coating strategy by on-demand bactericidal, self-adaptive antifouling, self-healing and lubricant hydrogels to address medical devices-related infections. STATEMENT OF SIGNIFICANCE: It is estimated over two billion peripheral intravenous catheters are annually used in hospitals around the world, and catheter-associated infection has become a great clinical challenge with rapidly rising morbidity and mortality. Surface coating is considered a promising approach, but substantial challenges remain in the development of coatings that simultaneously satisfy both anti-fouling and antibacterial attributes. Even more, few attempts have been made to design mechanically robust coatings and reversible antibacterial or antifouling capabilities, which are critical for long-term medical implants. To address these challenges, we propose a concise strategy to develop hydrogel coatings from commercially available poly(ethylene glycol) and polyvinyl alcohol. In addition to self-healing and lubricant capabilities, the reversible conversion between zwitterionic and cationic lactones of quaternary ammonium compounds enables on-demand bactericidal and self-adaptive antifouling effects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Synovial fluid lubricates articular joints by forming a hydrated layer between the cartilage surfaces. In degenerative joint diseases like osteoarthritis (OA), the synovial fluid is compromised, which leads to less effective innate lubrication and exacerbated cartilage degeneration. Studies over the years have led to the development of partially or fully synthetic biolubricants to reduce the coefficient of friction with cartilage in knee joints. Cartilage-adhering, hydrated lubricants are particularly important to provide cartilage lubrication and chondroprotection under high normal load and slow speed. Here, we report the development of a hyaluronic acid (HA)-based lubricant functionalized with cationic branched poly-L-lysine (BPL) molecules that bind to cartilage  via  electrostatic interactions. We surmised that the electrostatic interactions between the BPL-modified HA molecules (HA-BPL) and the cartilage facilitate localization of the HA molecules to the cartilage surface. The number of BPL molecules on the HA backbone was varied to determine the optimal grafting density for cartilage binding and HA localization. Collectively, our results show that our HA-BPL molecules adhered readily to cartilage and were effective as a lubricant in cartilage-on-cartilage shear measurements where the modified HA molecules significantly reduce the coefficient of friction compared to phosphate-buffered saline or HA alone. This proof-of-concept study shows how the incorporation of cartilage adhering moieties, such as cationic molecules, can be used to enhance cartilage binding and lubrication properties of HA.

Currently, it is crucial for the lubricant formulation industry to explore cost-effective and environmentally friendly methodologies for analyzing the tribological properties of engine aviation lubricants under high-temperature and high-pressure operating conditions. This study demonstrates the feasibility of employing molecular dynamic simulations to gain essential insights into the evolution of the tribological properties of lubricants during operation. A three-layer molecular model was devised, comprising nickel aluminide molecules in the top and bottom layers, and polyol ester in the core. The impact of sliding velocities ranging from 20 km/h to 100 km/h was investigated under varying temperature and pressure conditions. Concentration, temperature and velocity profiles, radial distribution function, mean square displacement, and friction coefficient were calculated and analyzed in detail. Notably, the highest friction coefficients - ranging from 2.5 to 0.75 - were observed at the lowest temperature and pressure conditions tested. Conversely, other sections of the gas turbine exhibited substantially lower friction coefficients - ranging from 0 to 0.01.Simulations demonstrate that increasing pressure and temperature reduce polymer chain mobility, leading to stronger internal interactions within the lubricant. Consequently, lubricant adsorption onto metal surfaces decreases. Furthermore, the lubricant performs exceptionally well when its molecules encounter higher velocities and temperatures. Based on the results obtained, the research demonstrates that the presented technique provides both quantitative and qualitative tribological information essential for understanding a system molecular behavior, serving as a guiding framework for researchers in the field.

Lubricating base oils have been extensively employed for producing various industrial and consumer products. Therefore, their environmental and health impacts should be carefully evaluated. Although there have been many reports on pulmonary cytotoxicity and inflammatory responses of inhaled lubricating base oils, their potential influences on pulmonary surfactant (PS) films that play an essential role in maintaining respiratory mechanics and pulmonary immunity remains largely unknown. Here a systematic study on the interactions between an animal-derived natural PS and aerosols of water and representative mineral and vegetable base oils is performed using a novel biophysical assessing technique called constrained drop surfactometry capable of providing in vitro simulations of normal tidal breathing and physiologically relevant temperature and humidity in the lung. It was found that the mineral oil aerosols can impose strong inhibitions to the biophysical property of PS film, while the airborne vegetable oils and water show negligible adverse effects within the studied concentration range. The inhibitory effect is originated from the strong hydrophobicity of mineral oil, which makes it able to disrupt the interfacial molecular ordering of both phospholipid and protein compositions and consequently suppress the formation of condensed phase and multilayer scaffolds in a PS film. ENVIRONMENTAL IMPLICATION: Understanding the biophysical influence of airborne lubricating base oils on pulmonary surfactant (PS) films can provide new insights into the environmental impacts and health concerns of various industrial lubricant products. Here a comparative study on interactions between an animal-derived natural PS film and the aerosols of water and representative mineral and vegetable base oils under the true physiological conditions was conducted in situ using constrained drop surfactometry. We show that the most frequently used mineral base oil can cause strong inhibitions to the PS film by disrupting the molecular ordering of saturated phospholipids and surfactant-associated proteins at the interface., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Developing efficient aqueous biolubricants has become a significant focus of research due to their prevalence in biotribological contacts and enormous potential in soft matter applications. In this study, size-controllable, pH-sensitive whey protein microgels were prepared using a water-in-water emulsion template method from protein-polysaccharide phase separation. The granular hydrogel from the protein microgels exhibited superior lubricity, obtaining 2.7-fold and 1.7-fold reductions in coefficient of friction (μ) compared to native protein and human saliva (μ = 0.30 compared to 0.81 and 0.52, respectively). The microgels also exhibited outstanding load-bearing capabilities, sustaining lubrication under normal forces up to 5 N. Microgels with a smaller size (1 μm) demonstrated better lubricating performance than 6 and 20 μm microgels. The exceptional lubricity was from a synergistic effect of the ball-bearing mechanism and the hydration state of the microgels. Particularly at pH 7.4, the hydration layer surrounding highly negative charges contributed to the electrostatic repulsion among the swollen microgels, leading to an improved buffer ability to separate contact surfaces and effective rolling behavior. Such pH-dependent repulsion was evidenced using a surface forces apparatus that the adhesion between the whey protein-coated surfaces and protein-mica surfaces decreased from 4.49 to 0.97 mN/m and from 7.89 to 0.36 mN/m, respectively, with pH increasing from the isoelectronic point to 7.4. Our findings fundamentally elucidated the tribo-rheological properties and lubrication mechanisms of the whey protein microgels with excellent biocompatibility and environmental responsiveness, offering novel insights for their food and biomedical applications requiring aqueous biolubrication.

Alkylnaphthalene lubricating oils are synthetic Group V base oils that are utilized in wide-ranging industrial applications and which are composed of polyalkyl chain-alkylated naphthalenes. Identification of alkylnaphthalene biotransformation products and determination of their mass spectrometry (MS) fragmentation signatures provides valuable information for predicting their environmental fates and for development of analytical methods to monitor their biodegradation. In this work, laboratory-based environmental petroleomics was applied to investigate the catabolism of the alkylnaphthalene, 1-butylnaphthalene (1-BN), by liquid chromatography electrospray ionization MS data mapping and targeted collision-induced dissociation (CID) analyses. Comparative mapping revealed that numerous catabolites were produced from soil bacterium, Sphingobium barthaii KK22. Targeted CID showed unique patterns of production of even-valued deprotonated fragments that were found to originate from specific classes of bacterial catabolites. Based upon results of CID analyses of catabolites and authentic standards, MS signatures were proposed to occur through formation of distonic radical anions from bacterially-produced alkylphenol biotransformation products. Finally, spectra interpretation was guided by CID results to propose chemical structures for twenty-two 1-BN catabolites resulting in construction of 1-BN biotransformation pathways. Multiple pathways were identified that included aromatic ring-opening, alkyl chain-shortening and production of α,β-unsaturated aldehydes from alkylated phenols. Until now, α,β-unsaturated aldehydes have not been a class of compounds much reported from alkylated polycyclic aromatic hydrocarbon (APAH) and PAH biotransformation. This work provides a new understanding of alkylnaphthalene biotransformation and proposes MS markers applicable to monitoring APAH biotransformation in the form of alkylated phenols, and by extension, α,β-unsaturated aldehydes, and toxic potential during spilled oil biodegradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Enhancing friction force in lubricated, compliant contacts is of particular interest due to its wide application in various engineering and biological systems. In this study, we have developed bioinspired surfaces featuring film-terminated ridges, which exhibit a significant increase in lubricated friction force compared to flat samples. We propose that the enhanced sliding friction can be attributed to the energy dissipation at the lubricated interface caused by elastic hysteresis resulting from cyclic terminal film deformation. Furthermore, increasing inter-ridge spacing or reducing terminal film thickness are favorable design criteria for achieving high friction performance. These findings contribute to our understanding of controlling lubricated friction and provide valuable insights into surface design strategies for novel functional devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The basic tribological experiments have reported that nano-graphene lubricating oil has excellent anti-friction and anti-wear properties, which has been widely concerned. However, the real anti-friction effect of nano-graphene lubricating oil and its impact on engine power performance, economic performance and emission performance remain to be proved. This has seriously hindered the popularization and application of nano-graphene lubricating oil in the engine field. In this paper, nano-graphene powder was chemically grafted to prepare nano-graphene lubricating oil with high dispersion stability. The influence of nano-graphene on physicochemical properties of lubricating oil was studied, and the influence of nano-graphene on engine power performance, economic performance and emission performance was explored. The results show that after modification, the dispersion of nano-graphene in lubricating oil is improved. Compared with pure lubricating oil, the addition of nano-graphene makes the kinematic viscosity of lubricating oil slightly lower, and has little effect on the density, flash point, pour point and total acid value of lubricating oil. The reversed towing torque of nano-graphene lubricating oil is reduced by 1.82-5.53%, indicating that the friction loss decreases. The specific fuel consumption of the engine is reduced, which indicates that the fuel economic performance is improved. Engine HC+NOX, CH4, CO2 emissions do not change much, but particulate matter (PM) emissions increase by 8.85%. The quantity concentration of nuclear particles, accumulated particles and total particles of nano-graphene lubricating oil are significantly higher than that of pure lubricating oil. And the increase of the quantity concentration of accumulated particles is more obvious than that of nuclear particles, and the larger the load, the more obvious this phenomenon. In order to apply nano-graphene lubricating oil to the engine, it is also necessary to further study its impact on the post-processing system, adjust the control strategy of the post-processing system and then test and calibrate., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Kuang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Approximately half of the lubricants sold globally find their way into the environment. The need for Environmentally Acceptable Lubricants (EALs) is gaining increased recognition. A lubricant is composed of a base oil and multiple functional additives. The literature has been focused on EAL base oils, with much less attention given to eco-friendly additives. This study presents the tribological performance and aquatic toxicity of four short-chain phosphonium-phosphate and ammonium-phosphate ionic liquids (ILs) as candidate anti-wear and friction-reducing additives for EALs. The results are benchmarked against those of four commercial bio-derived additives. The four ILs, at a mere 0.5 wt% concentration in a synthetic ester, demonstrated a 30-40% friction reduction and >99% wear reduction, superior to the commercial baselines. More impressively, all four ILs showed significantly lower toxicity than the bio-derived products. In an EPA-standard chronic aquatic toxicity test, the sensitive model organism, Ceriodaphnia dubia, had 90-100% survival when exposed to the ILs but 0% survival in exposure to the bio-derived products at the same concentration. This study offers scientific insights for the future development of eco-friendly ILs as lubricant additives.

Development of high-performance joint injection lubricants has become the focus in the field of osteoarthritis treatment. Herein, natural product of angelica essential oil combined with the graphene oxide were prepared to the stable Pickering emulsion as a biological lubricant. The tribological properties of the Pickering emulsion under different friction conditions were studied. The lubricating mechanism was revealed and the biological activities were evaluated. Results showed that the prepared Pickering emulsion displayed superior lubrication property at the Ti6Al4V biological material interface. The maximum friction reduction and anti-wear abilities of the Pickering emulsion were improved by 36% and 50% compared to water, respectively. This was primarily due to the action of the double-layer lubrication films composed of the graphene oxide and angelica essential oil molecules. It was worth noting that the friction reduction effect of the Pickering emulsion at the natural cartilage interface was higher about 19% than that of HA used in clinic for OA commonly. In addition, the Pickering emulsion also displayed antioxidant activity and cell biocompatibility, showing a good clinical application prospect in the future., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Quantitative assessment of biotribological properties requires expensive specialized equipment. The aim was to: i) adapt an open-source load cell-based platform (PASTA) for biotribometric analysis; ii) study the effects of oxidation on the water-based lubricant using PASTA. Water-based lubricant was treated with 2,2'-azobis(2-amidinopropane) dihydrochloride and/or glutathione. The samples were analyzed with the ORP-146S redox microsensor and PASTA using a modified HX711 integrated circuit bord, NodeMCU ESP-32S, and an open-source Python script. PASTA can be adapted for affordable and reliable quantitative biotribometric assessment. Glutathione can prevent the loss of lubrication capacity of a water-based lubricant upon exposure to air.

The role of carboxylic, aldehyde, or epoxide groups incorporated into bottlebrush macromolecules as anchoring blocks (or cartilage-binding blocks) is investigated by measuring their lubricating properties and cartilage-binding effectiveness. Mica modified with amine groups is used to mimic the cartilage surface, while bottlebrush polymers functionalized with carboxylic, aldehyde, or epoxide groups played the role of the lubricant interacting with the cartilage surface. We demonstrate that bottlebrushes with anchoring blocks effectively reduce the friction coefficient on modified surfaces by 75-95% compared to unmodified mica. The most efficient polymer appears to be the one with epoxide groups, which can react spontaneously with amines at room temperature. In this case, the value of the friction coefficient is the lowest and equals 0.009 ± 0.001, representing a 95% reduction compared to measurements on nonmodified mica. These results show that the presence of the functional groups within the anchoring blocks has a significant influence on interactions between the bottlebrush polymer and cartilage surface. All synthesized bottlebrush polymers are also used in the preliminary lubrication tests carried out on animal cartilage surfaces. The developed materials are very promising for future in vivo studies to be used in osteoarthritis treatment.

Objectives: Using a wetting resin or adhesive system as an instrument lubricant when placing composite layers is commonly practiced to improve handling. This study investigated whether instrument lubricants affected strength, stiffness, or hardness., Methods: Composite beams (TPH Spectra) were fabricated using a stainless steel mold (25×2.5×2 mm) in two steps, where the second half (12.5 mm) was added and cured against a cured first half (n=15). The composite surface at the open end of the first half was smoothed using an instrument lubricated with wetting resin (Ultradent) or universal adhesive (ScotchBond Universal), enough to prevent sticking, or without lubrication. An additional beam of each group was characterized using scanning electron microscopy. Monolithic specimens were also fabricated. After 24 hour storage (37°C, 100% humidity), the beams' flexural strength and stiffness were determined by four-point bending. Vickers surface hardness was measured on 24-hour composite samples in 2 mm deep acrylic cavities, cured after the surface was smoothed with the two instrument lubricants or no lubricant (n=10). Hardness was remeasured after finishing with a series of contouring and polishing discs. Data were statistically analyzed using ANOVA followed by Student-Newman-Keuls post hoc test at 0.05 significance level., Results: There were significant differences (p<0.001) in flexural strength and stiffness among groups. While strength and stiffness were not affected by using a wetting resin as instrument lubricant, use of a universal adhesive increased strength and stiffness significantly, achieving monolithic values. Scanning electron micrographs showed less porosities at the interface when using instrument lubricants. Surface hardness was significantly reduced in groups in which instrument lubricants were used, but finishing/polishing restored original hardness (p<0.001)., Conclusions: Lubricating an instrument with a wetting agent did not adversely affect physical or surface properties, provided the surface was finished and polished. If a universal adhesive was used as lubricant, the strength and stiffness of a layered composite could be increased, reaching monolithic values., (©Operative Dentistry, 2024.)

The increasing prevalence of dry eye syndrome in aging and digital societies compromises long-term contact lens (CL) wear and forces users to regular eye drop instillation to alleviate discomfort. Here a novel approach with the potential to improve and extend the lubrication properties of CLs is presented. This is achieved by embedding lubricant-secreting biofactories within the CL material. The self-replenishable reservoirs autonomously produce and release hyaluronic acid (HA), a natural lubrication and wetting agent, long term. The hydrogel matrix regulates the growth of the biofactories and the HA production, and allows the diffusion of nutrients and HA for at least 3 weeks. The continuous release of HA sustainably reduces the friction coefficient of the CL surface. A self-lubricating CL prototype is presented, where the functional biofactories are contained in a functional ring at the lens periphery, outside of the vision area. The device is cytocompatible and fulfils physicochemical requirements of commercial CLs. The fabrication process is compatible with current manufacturing processes of CLs for vision correction. It is envisioned that the durable-by-design approach in living CL could enable long-term wear comfort for CL users and minimize the need for lubricating eye drops., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Unexpected cross-contamination by foreign components during the manufacturing and quality control of pharmaceutical products poses a serious threat to the stable supply of drugs and the safety of customers. In Japan, in 2020, a mix-up containing a sleeping drug went undetected by liquid chromatography during the final quality test because the test focused only on the main active pharmaceutical ingredient (API) and known impurities. In this study, we assessed the ability of a powder rheometer to analyze powder characteristics in detail to determine whether it can detect the influence of foreign APIs on powder flow. Aspirin, which was used as the host API, was combined with the guest APIs (acetaminophen from two manufacturers and albumin tannate) and subsequently subjected to shear and stability tests. The influence of known lubricants (magnesium stearate and leucine) on powder flow was also evaluated for standardized comparison. Using microscopic morphological analysis, the surface of the powder was observed to confirm physical interactions between the host and guest APIs. In most cases, the guest APIs were statistically detected due to characteristics such as their powder diameter, pre-milling, and cohesion properties. Furthermore, we evaluated the flowability of a formulation incorporating guest APIs for direct compression method along with additives such as microcrystalline cellulose, potato starch, and lactose. Even in the presence of several additives, the influence of the added guest APIs was successfully detected. In conclusion, powder rheometry is a promising method for ensuring stable product quality and reducing the risk of unforeseen cross-contamination by foreign APIs., (© 2024. The Author(s), under exclusive licence to American Association of Pharmaceutical Scientists.)

Hydrogels are considered as a potential cartilage replacement material based on their structure being similar to natural cartilage, which are of great significance in repairing cartilage defects. However, it is difficult for the existing hydrogels to combine the high load bearing and low friction properties (37 °C) of cartilage through sample methods. Herein, we report a facile and new fabrication strategy to construct the PNIPAm/EYL hydrogel by using the macrophase separation of supersaturated N -isopropylacrylamide (NIPAm) monomer solution to promote the formation of liposomes from egg yolk lecithin (EYL) and asymmetric template method. The PNIPAm/EYL hydrogels possess a relatively high compressive strength (more than 12 MPa), fracture energy (9820 J/m 2 ), good fatigue resistance, lubricating properties, and excellent biocompatibility. Compared with the PNIPAm hydrogel, the friction coefficient (COF 0.046) of PNIPAm/EYL hydrogel is reduced by 50%. More importantly, the COF (0.056) of PNIPAm/EYL hydrogel above lower critical solution temperature (LCST) does not increase significantly, exhibiting heat-tolerant lubricity. The finite element analysis further proves that PNIPAm/EYL hydrogel can effectively disperse the applied stress and dissipate energy under load conditions. This work not only provides new insights for the design of high-strength lubricating hydrogels but also lays a foundation for the treatment of cartilage injury as a substitute material.

In order to reveal the current status and future trends of lubricant additives, this study analyzes the structured and unstructured data of 77701 lubricant additive patents recorded by Patsnap. The results show that China is the country with the largest number of patents in this field, and the United States is the main exporting country of international technology flow; the current research and development of lubricant additives is dominated by multifunctional composite additives; environmentally friendly additive compositions are the current research hotspot; and more environmentally friendly and economically degradable additives have more development potential in the future. Overall, this study provides a comprehensive understanding of the research and application of lubricant additives and contributes to the future development of the lubricant industry., Competing Interests: I have read the journal’s policy and the authors of this manuscript have the following competing interests: No conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication., (Copyright: © 2024 Wang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Bottlebrush polymers (BB) have emerged as compelling candidates for biosystems to face tribological challenges, including friction and wear. This study provides a comprehensive assessment of an engineered triblock BB polymer's affinity, cell toxicity, lubrication, and wear protection in both in vitro and in vivo settings, focusing on applications for conditions like osteoarthritis and dry eye syndrome. Results show that the designed polymer rapidly adheres to various surfaces (e.g., cartilage, eye, and contact lens), forming a robust, biocompatible layer for surface lubrication and protection. The tribological performance and biocompatibility are further enhanced in the presence of hyaluronic acid (HA) both in vitro and in vivo. The exceptional lubrication performance and favorable interaction with HA position the synthesized triblock polymer as a promising candidate for innovative treatments addressing deficiencies in bio-lubricant systems., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Lubricants are essential for most tablet formulations as they assist powder flow, prevent adhesion to tableting tools and facilitate tablet ejection. Magnesium stearate (MgSt) is an effective lubricant but may compromise tablet strength and disintegratability. In the design of orodispersible tablets, tablet strength and disintegratability are critical attributes of the dosage form. Hence, this study aimed to conduct an in-depth comparative study of MgSt with alternative lubricants, namely sodium lauryl sulphate (SLS), stearic acid (SA) and hydrogenated castor oil (HCO), for their effects on the tableting process as well as tablet properties. Powder blends were prepared with lactose, sodium starch glycolate or crospovidone as the disintegrant, and a lubricant at different concentrations. Angle of repose was determined for the mixtures. Comparative evaluation was carried out based on the ejection force, tensile strength, liquid penetration and disintegratability of the tablets produced. As the lubricant concentration increased, powder flow and tablet ejection improved. The lubrication efficiency generally decreased as follows: MgSt > HCO > SA > SLS. Despite its superior lubrication efficacy, MgSt is the only lubricant of four evaluated that reduced tablet tensile strength. Tablet disintegration time was strongly determined by tensile strength and liquid penetration, which were in turn affected by the lubricant type and concentration. All the above factors should be taken into consideration when deciding the type and concentration of lubricant for an orodispersible tablet formulation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The majority of tablets manufactured contain lubricants to reduce friction during ejection. However, especially for plastically deforming materials, e.g., microcrystalline cellulose (MCC), the internal addition of lubricants is known to reduce tablet tensile strength. This reduction is caused by the surface coverage by lubricant particles, the extent of which depends on both process and formulation parameters. Previously published models to predict the lubrication effect on mechanical strength do not account for changes in the excipient particle size. In this study, the impact of both lubricant concentration and mixing time on the tensile strength of tablets consisting of three different grades of MCC and four grades of magnesium stearate (MgSt) was evaluated. By taking into account the particle size of the applied excipients, a unifying relationship between the theoretically estimated surface coverage and compactibility reduction was identified. Evaluating the dispersion kinetics of MgSt as a function of time reveals a substantial impact of the initial surface coverage on the dispersion rate, while the minimal tensile strength was found to be comparable for the majority of formulations. In summary, the presented work extends the knowledge of lubricant dispersion and facilitates the reduction of necessary experiments during the development of new tablet formulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

The ocular environment is crucial for a biological lubrication system. An unstable condition of tear film may cause a series of ocular diseases due to serious friction, such as dry eye syndrome, which has drawn extensive attention nowadays. In this study, an in vitro biocompatible superlubricity system, containing thermogelling copolymers (PCGA-PEG-PCGA) and slow-release lubricant (PEG 300/Tween 80), was constructed. First, the sol-gel transition temperature and gel strength of PCGA-PEG-PCGA were adjusted based on the ocular environment by regulating the length of PCGA blocks. Furthermore, the copolymer hydrogel exhibited a reliable slow-release property within 10 days and showed low cytotoxicity. Then, the superlubricity (coefficient of friction of approximately 0.005) was achieved with its released PEG 300/Tween 80 aqueous solution at the sliding velocity range of 1-100 mm s -1 and pressure range of 10-22 kPa. However, the lubrication behaviors varied, while PEG 300 chains and Tween 80 micelles were demonstrated to form a multilayer and a single layer adsorption structure on the sliding surface, respectively. On the whole, the composite lubrication systems, especially the one composed of Tween 80, showed excellent tribological properties owing to the stable slow-release and full hydration effects under ocular conditions, which hold great potential for improving ocular lubrication and maintaining human visual health.

Lubricating oils help an internal combustion engine function effectively by reducing friction and wear on the engine's moving parts. They typically consist of petroleum-derived base oil and various additives to achieve the desired characteristics in automotive engine oils. Determination of aromatics and polar additives in the finished and used lubricating oils is not possible with existing methods hence their development is significant from the perspectives of environment and reuse/re-refining of used lubricating oils. This study reports the development of a new HPLC method to determine additives in the finished lubricating oils and/or polars in the used engine oils. The proposed method is simple, fast (runtime of 13 min), does not require sample pre-treatment, and exhibits high precision and superior limits of detection and quantification. The method demonstrated good linear response ranging from 0.1 to 30 mass for total aromatics and 0.1 to 20 % for additives. The method validation was carried out by analyzing brand-new commercial two and four-wheeler lubricants with used automotive lubricants. Based on the proposed method, the aromatics and additives concentration ranges in the studied finished lubricants were estimated between 0.20-1.70 % (mass) and 0.20-3.50 % (mass), respectively. Similarly, for used lubricants, the aromatics and additives were estimated to be 1.00-6.10 % and 0.60-2.40 % (mass), respectively., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This comprehensive review offers a chemical analysis of cutting fluids, delving into both their formulation and deformulation processes. The study covers a wide spectrum of cutting fluid formulations, ranging from simple compositions predominantly comprising oils, whether mineral or vegetable, to emulsions. The latter involves the integration of surfactants, encompassing both nonionic and anionic types, along with a diverse array of additives. Concerning oils, the current trend leans towards the use of vegetable oils instead of mineral oils for environmental reasons. As vegetable oils are more prone to oxidation, chemical alterations, the addition of antioxidant may be necessary. The chemical aspects of the different compounds are scrutinized, in order to understand the role of each component and its impact on the fluid's lubricating, cooling, anti-wear, and anti-corrosion properties. Furthermore, the review explores the deformulation methodologies employed to dissect cutting fluids. This process involves a two-step approach: separating the aqueous and organic phases of the emulsions by physical or chemical treatments, and subsequently conducting a detailed analysis of each to identify the compounds. Several analytical techniques, including spectrometric or chromatographic, can be employed simultaneously to reveal the chemical structures of samples. This review aims to contribute to the improvement of waste treatment stemming from cutting fluids. By gathering extensive information about the formulation, deformulation, and chemistry of the ingredients, there is a potential to enhance the waste management and disposal effectively.

Tethered-liquid perfluorocarbons (TLPs) are a class of liquid-infused surfaces with the ability to reduce blood clot formation (thrombosis) on blood-contacting medical devices. TLP comprises a tethered perfluorocarbon (TP) infused with a liquid perfluorocarbon (LP); this LP must be retained to maintain the antithrombotic properties of the layer. However, the stability of the LP layer remains in question, particularly for medical devices under blood flow. In this study, the lubricant thickness is spatially mapped and quantified in situ through confocal dual-wavelength reflection interference contrast microscopy. TLP coatings prepared on glass substrates are exposed to the flow of 37% glycerol/water mixtures (v/v) or whole blood at a shear strain rate of around 2900 s -1 to mimic physiological conditions (similar to flow conditions found in coronary arteries). Excess lubricant (>2 μm film thickness) is removed upon commencement of flow. For untreated glass, the lubricant is completely depleted after 1 min of shear flow. However, on optimized TLP surfaces, nanoscale films of lubricants (thickness between 100 nm and 2 μm) are retained over many tens of minutes of flow. The nanoscale films conform to the underlying structure of the TP layer and are sufficient to prevent the adhesion of red blood cells and platelets.

Punch sticking is a recurrent problem during the pharmaceutical tableting process. Powder moisture content plays a key role in the buildup of sticking; it evaporates due to increased tablet temperature, accumulates at the punch-tablet interface, and causes sticking through capillary force. This study investigated the effects of compaction pressure (CP), compaction speed (CS), and lubrication level (magnesium stearate (MgSt) ratio) on tablet surface temperature (TST) and tablet surface moisture content (TSMC). TST and TSMC were measured with an infrared thermal camera and near-infrared sensor, respectively. Microcrystalline cellulose was used as the tableting powder and MgSt as the lubricant. The low range of CS values (16-32 mm/s) considered in this study did not have significant effects on TST and TSMC. MgSt ratio had a significant positive effect on TST; this may be explained by the increase in powder blend effusivity with the addition of MgSt. However, MgSt ratio did not have a significant effect on TSMC. CP had a significant positive effect on both TST and TSMC. Increased CP induced higher heat generation through particle deformation and friction during the compaction phase, leading to increased TST. Furthermore, the water vapor diffusion rate through the powder bed might have increased due to the rise in thermal energy and led to further moisture accumulation at the tablet-punch interface, causing the significant positive effect of CP on TSMC. This result may explain the occurrence of sticking regardless of the CP applied during the tableting process.

This study discusses the lubricant properties of magnesium stearate solid lipid nanoparticles (MgSt-SLN) and their effect on the tabletability, mechanical properties, disintegration, and acetaminophen-model dissolution time of microcrystalline cellulose (MCC) tablets prepared by direct compression. The behavior of MgSt-SLN was compared to reference material (RM) to identify advantages and drawbacks. The nanoprecipitation/ion exchange method was employed to prepare the MgSt-SLN. Particle size, zeta potential, specific surface area, morphology, and true density were measured to characterize the nanosystem. The MgSt-SLN particle sizes obtained were 240 ± 5 nm with a specific surface area of 12.2 m 2 /g. The MCC tablets with MgSt-SLN presented a reduction greater than 20 % in their ejection force, good tabletability, higher tensile strength, lower disintegration delay, and marked differences in acetaminophen dissolution when compared to the RM. The reduced particle size of the magnesium stearate seems to offer a promising technological advantage as an efficient lubricant process that does not affect the properties of tablets., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Xerostomia, the subjective sensation of 'dry mouth' affecting at least 1 in 10 adults, predominantly elders, increases life-threatening infections, adversely impacting nutritional status and quality of life. A patented, microgel-reinforced hydrogel-based aqueous lubricant, prepared using either dairy or plant-based proteins, has been demonstrated to offer substantially enhanced lubricity comparable to real human saliva in in vitro experiments. Herein, we present the benchmarking of in vitro lubrication performance of this aqueous lubricant, both in its dairy and vegan formulation against a range of widely available and employed commercial saliva substitutes, latter classified based on their shear rheology into "liquids", "viscous liquids" and "gels", and also had varying extensional properties. Strikingly, the fabricated dairy-based aqueous lubricant offers up to 41-99% more effective boundary lubrication against liquids and viscous liquids, irrespective of topography of the tested dry mouth-mimicking tribological surfaces. Such high lubricity of the fabricated lubricants might be attributed to their limited real-time desorption (7%) from a dry-mouth mimicking hydrophobic surface unlike the tested commercial products including gels (23-58% desorption). This comprehensive benchmarking study therefore paves the way for employing these microgel-based aqueous lubricant formulations as a novel topical platform for dry mouth therapy., (© 2023. The Author(s).)

Lubricants are excipients used in tablet formulations to reduce friction and adhesion forces within the die or on the punches surface during the manufacturing process. Despite these excipients are always required for the tablets production, their amount must be carefully evaluated since lubricants can negatively impact on mechanical strength, disintegration and dissolution behavior of solid dosage forms. Alternative compounds have been suggested to overcome the issues of conventional lubricants and sodium lauryl sulfate (SDS) is one of the most promising one. Despite SDS has been object of several investigations, a definitive conclusion on its effectiveness cannot still be drawn. Particularly, its efficacy on tablets disaggregation and API dissolution is still unclear. Here, the effect of SDS on all the relevant features of tablets and tableting process has been evaluated on immediate release hydrophobic tablets formulations in comparison with conventional lubricants. The results of this investigation are quite outspoken: SDS has a low lubricant power while it determines only a limited improvement on tablets hardness. It greatly improves the tablets wettability but only on model formulations, the presence of superdisintegrants resets its effectiveness and any possible effect on tablets disaggregation. None of the tested formulations showed improvement on the API dissolution rate., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

2,6-Di-tert-butyl-hydroxytotulene (BHT) is an additive commonly used in the manufacturing of lubricants to improve their antioxidant properties. However, in this study, we found that BHT affects the biodegradation of bio-lubricants by influencing the microbial community during the degradation of bio-lubricants. Specifically, BHT was found to reduce bacterial richness in activated sludge, but it increased the relative abundance of Actinobacteria (from 21.24% to 40.89%), Rhodococcus (from 17.15% to 31.25%), Dietzia (from 0.069% to 6.49%), and Aequorivita (from 0.90% to 1.85%). LEfSe analysis and co-occurrence network analysis suggested that Actinobacteria could be potential biomarkers and keystone taxa in microbial communities. Using the MetaCyc pathway database, the study found that BHT interfered with cellular biosynthetic processes. Additionally, the study also showed that mineral-lubricant base oils, which are difficult to degrade, significantly altered the diversity and composition of the microbiome. Overall, the findings demonstrate that BHT and mineral-lubricant base oils can substantially alter bacterial richness, structure, and function, potentially contributing to the difficulty in degrading lubricants. These findings have implications for the development of more biodegradable lubricants and the management of industrial waste containing lubricants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Bacterial nanocellulose (BNC) is a naturally derived hydrogel that has recently paved its way in several biomedical applications. Despite its remarkable tissue-like properties, BNC does not express innate anticoagulant or antimicrobial properties; therefore, appropriate post-modification procedures are required to prevent nonspecific adhesion and enhance the hemocompatibility properties of BNC-based biointerface. Here, we report a new class of flexible, lubricant-infused BNC membranes with superior antithrombotic and antibacterial properties. Using chemical vapor deposition, porous BNC membranes were functionalized with fluorosilane molecules and further impregnated with a fluorocarbon-based lubricant. Compared with unmodified BNC membranes and commercially available poly(tetrafluoroethylene) (PTFE) felts, our developed lubricant-infused BNC samples significantly attenuated plasma and blood clot formation, and prevented bacterial migration, adhesion, and biofilm formation and exhibited superior fat and enzyme repellency properties. Moreover, when subjected to mechanical testing, the lubricant-infused BNC membranes demonstrated a significantly higher tensile strength and greater fatigue resistance when compared with unmodified BNC samples and PTFE felts. Overall, the superior mechanical strength and antithrombotic, antibacterial, and fat/enzyme resistant properties observed in the developed super-repellent BNC-based membranes render their application promising for various biofluid-contacting medical implants and tissue engineering constructs.

Modeling of structural and mechanical tablet properties consisting of multiple components, based on a minimum of experimental data is of high interest, in order to minimize time- and cost-intensive experimental trials in the development of new tablet formulations. The majority of commonly available models use the compressibility and compactibility of constituent components and establish mixing rules between those components, in order to predict the tablet properties of formulations containing multiple components. However, their applicability is limited to single materials, which form intact tablets (e.g. lactose, cellulose) and therefore, they cannot be applied for lubricants. Lubricants are required in the majority of industrial tablet formulations and usually influence the mechanical strength of tablets. This study combines the multi-component compaction model of Reynolds et al. (2017) with a recently published lubrication model (Puckhaber et al. 2020) to describe the impact of multiple components on a formulation consisting of two diluents and a lubricant. By that, this model combination displays a meaningful extension of existing compaction models and allows the systematic prediction of properties of lubricated multi-component tablets., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The aim of this work was to study the influence of the acetylation process of kraft lignin on developing dispersions potentially applicable as new bio-based semisolid lubricants. Lignin was functionalized with acetic anhydride and pyridine as a catalyst by modifying different reaction variables (temperature, ratio of pyridine/acetic anhydride and time). Acetylated lignin was analyzed using FTIR, 1 H and 13 C NMR techniques, TGA, DSC and SEM to evaluate the chemical, morphological and thermal changes induced by the acetylation process. The influence of the acetylation process on the rheological and tribological properties of dispersions was related to the development of different microstructures, which depend on chemical and morphological properties of acetylated lignin. In this sense, two different rheological behaviours (gel-like or fluid-like) were found to depend on the reaction time. From the experimental results obtained, it can be concluded that the acetylation process is a key issue to modulate rheological and morphological properties of dispersions, resulting in an effective method to improve the compatibility of lignin and castor oil. Acetylated lignin with medium degrees of substitution with adequate morphological properties can be potentially used as an effective thickening agent to develop semisolid lubricants., Competing Interests: Declaration of competing interest There are no interests to declare: ‘Declarations of interest: none’., (Copyright © 2022. Published by Elsevier B.V.)

Scanning electron microscopy-based energy dispersive X-ray spectroscopy (SEM-EDS) is proposed as a versatile tool for quantifying surface area coverage (SAC) by magnesium stearate (MgSt) on pharmaceutical tablets and particles. Our approach involved fast elemental mapping and subsequent SAC quantitation by image analysis. The study was conducted using a multi-component system, but the particle-level mapping was limited to active pharmaceutical ingredient (API) crystals. For both tablets and API particles, the calculated SAC against MgSt loading afforded a positive linear correlation over the range of MgSt levels examined in this work. On the tablet surface, MgSt was found to be preferentially concentrated at or in the close vicinity of grain boundaries, supporting the idea of compression-driven migration and relocation of MgSt within the tablet. On the particle surface, only discrete aggregates of MgSt were observed, as opposed to the widely accepted phenomenon of the formation of a thin lubricant film around host particles. The selection of proper SEM-EDS operating conditions and the challenges confronted in particle surface mapping are discussed in detail., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The lubrication deficiency in joints is a major cause of osteoarthritis. One of the most commonly used treatment means is to inject artificial lubricants, but there is a potential risk of infection during the injection process. Therefore, developing artificial lubricants with dual functions of friction-reduction and antibacterial is urgent. In this work, a novel polysaccharide-derived lubricant with simultaneous anti-bacteria and water-lubrication properties, called CS-MPC-N, is developed by grafting 2‑methacryloyloxylethyl phosphorylcholine (MPC) and nisin peptide onto backbone of chitosan (CS). Compared to the control CS, CS-MPC-N exhibits good lubrication and friction-reduction properties because of its excellent water solubility. Especially, CS-MPC-N shows low friction coefficient (0.03 ∼ 0.05) at the sliding interfaces of artificial joints materials or even natural articular cartilages. Moreover, CS-MPC-N can effectively inhibit the proliferation of Staphylococcus aureu, exhibiting excellent antibacterial effect. This kind of novel polysaccharide-derived lubricant is expected to be used in treating infectious arthritis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Microbial biofilm build-up in water distribution systems can pose a risk to human health and pipe material integrity. The impact is more devastating in space stations and to astronauts due to the isolation from necessary replacement parts and medical resources. As a result, there is a need for coatings to be implemented onto the inner region of the pipe to minimize the adherence and growth of biofilms. Lubricant-infused surfaces has been one such interesting material for anti-biofouling applications in which their slippery property promotes repellence to many liquids and thus prevents bacterial adherence. Textured and porous films are suitable substrate candidates to infuse and contain the lubricant. However, there is little investigation in utilizing a nanoparticulate thin film as the substrate material for lubricant infusion. A nanoparticulate film has high porosity within the structure which can promote greater lubricant infusion and retention. The implementation as a thin film structure aids to reduce material consumption and cost. In our study, we utilized a well-studied nanoporous thin film fabricated via layer-by-layer assembly of polycations and colloid silica and then calcination for greater stability. The film was further functionalized to promote fluorinated groups and improve affinity with a fluorinated lubricant. The pristine nanoporous film was characterized to determine its morphology, thickness, wettability, and porosity. The lubricant-infused film was then tested for its lubricant layer stability upon various washing conditions and its performance against bacterial biofilm adherence as a result of its slippery property. Overall, the modified silica nanoparticulate thin film demonstrated potential as a base substrate for lubricant-infused surface fabrication that repelled against ambient aqueous solvents and as an anti-biofouling coating that demonstrated low biofilm coverage and colony forming unit values. Further optimization to improve lubricant retention or incorporation of a secondary function can aid in developing better coatings for biofilm mitigation.

Osteoarthritis is the most common degenerative and highly prevalent joint disease, characterized by progressive loss and destruction of articular cartilage. The damaged cartilage surface has an increased friction, which causes patients to suffer from serious pain. Restoring the lubrication ability of the joint is central to the treatment of osteoarthritis, a key topic in medical research. A variety of lubricants have been designed to reduce friction in joints and promote cartilage tissue repair to alleviate the symptoms of osteoarthritis. Herein, we review the recent progress of lubricants from the three perspectives of natural, bioinspired, and alternative strategies for osteoarthritis treatment, as well as the structural characterization and lubrication properties of such lubricants. Specifically, natural lubricants include glycosaminoglycans, lubricin and lipids in joints, bioinspired lubricants include scaffolds mimicking hyaluronic acid or lubricin, and alternative lubricants include modified lubricants based on hyaluronic acid, lipids, nanoparticles, and peptides. We also discuss the current challenges and long-term perspectives for further research in this area., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflict of interest., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Lubricants operate as antifriction media, preserving machine reliability, facilitating smooth operation, and reducing the likelihood of frequent breakdowns. The petroleum-based reserves are decreasing globally, leading to price increases and raising concerns about environmental degradation. The researchers are concentrating their efforts on developing and commercializing an environmentally friendly lubricant produced from renewable resources. Biolubricants derived from nonedible vegetable oils are environmentally favorable because of their non-toxicity, biodegradability, and close to net zero greenhouse gas emissions. The demand for bio lubricants in industry and other sectors is increasing due to their non-toxic, renewable, and environmentally friendly nature. Good lubrication, anti-corrosion, and high flammability are characteristic properties of vegetable oils due to their unique structure. This study presents several key properties of nonedible oils that are used to produce lubricants via the transesterification process. Bibliometric analysis is also performed, which provides us with a better understanding of previous studies related to the production of bio lubricants from the transesterification process. Only 371 published documents in the Scopus database were found to relate to the production of bio lubricants using the transesterification process. The published work was mostly dominated by research articles (286; 77.088%). Significant development can be seen in recent years, with the highest occurrence in 2021, reaching 68 publications accounting for 18.38% of the total documents. In the second step, (i) the authors with the most number of publications; (ii) journals with the most productions; (iii) most productive countries; and (iv) the authors' most frequently used keywords were evaluated. These results will provide a pathway for researchers interested in this field. Lastly, recommendation is made on research gaps to device possible strategies for its commercialization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Slippery liquid-filled porous surfaces (SLIPS) have attracted extensive research attention for their unique repellent properties, but such surfaces typically lack essential bactericidal activity and cannot defend against the spread of bacteria once bacterial contamination occurs. Herein, a slippery liquid-infused porous surface (SLIPS), endowed with both super-repellent and contact-killing antimicrobial performances is reported. Firstly, polystyrene (PS) based porous structures are developed via a facile microphase separation technique with poly(ethylene glycol) (PEG) as the sacrifice template. The porous surface was then covalently modified by 3-(trimethoxysilyl)propyl dimethyl undecyl ammonium chloride (QAC-Silane) to get the contact-killing antimicrobial performances. After lubricant (silicone oil) is introduced to the porous structure, the SLIPS surface demonstrates remarkably high super-repellence against both Gram-positive and negative bacteria, and also maintains essential contact-killing antimicrobial activities from the fixed QAC-11 groups, once the infused lubricant was depleted. Also, this surface demonstrates a reduced coefficient of friction (COF) of ∼56% as compared to that of the control flat surface. Moreover, this SLIPS surface can be easily realized on various substrates, such as silica glass, polycarbonate (PC), polyethylene terephthalate (PET), polyethylene (PE) and silicone catheter tube. Owing to its simple, low-cost and fast fabrication approach, this kind of surface may find unique biomedical applications where an effective antibacterial performance and lubricity are highly needed., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

In rotary tablet presses, the powder flow into the dies is typically facilitated by paddle feeder. For internally lubricated formulations, the shear forces exerted by the paddle rotation can result in a considerable decrease in tablet strength due to the dispersion of lubricant agglomerates. Available models to describe the lubricant dispersion in paddle feeder allow only a limited quantitative description and transferability of the process. This study introduces an empirical dispersion kinetic which is able to precisely describe the reduction of compactibility due to the shear stresses inside the paddle feeder, even for inhomogeneously flowing material. Additionally, by blending different grades of magnesium stearate at three levels of lubricant concentration with two different grades of microcrystalline cellulose, the impact of bulk properties on the lubrication dispersion in the feed frame was investigated. It was shown, that for a given formulation, the kinetics of compactibility reduction are comparable for different magnesium stearate concentrations. Additionally, the bulk properties of the applied magnesium stearate grade critically affect the dispersion kinetics as well as the maximum compactibility reduction inside the feed frame. In summary, the developed model represents a meaningful extension of the currently available process models for pharmaceutical tablet lubrication., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Several edible and non-edible oil sources are currently being developed as renewable basestocks for biolubricant production. However, these feedstocks possess undesirable physicochemical properties limiting their lubricant applications. Chemical modification and additive-based routes could be used to modify their properties -suitable for different biolubricant applications. The first part of this study compares how the selected modifications affect the properties of the basestocks. Next, the techno-economic analysis (TEA) was conducted to study 4 selected biolubricants and a potential biolubricant derived from marine microalgae biomass. Oxidative stabilities of chemically modified biolubricants followed the order of epoxidation> triesterification> estolide. Pour points of triesters showed minimal increments and reduced for estolides, whereas epoxidation increased pour points. Estolides exhibit maximum kinematic viscosity increment among chemical modification routes, followed by TMP-transesterification and epoxidation. The oxidative stability of chemically modified biolubricants was higher than additized biolubricants; conversely, the viscosity increments and pour point reductions for additized biolubricants were higher than chemically modified biolubricants. TEA results show that the unit cost for producing 1-kg estolide was the highest among the chemical modification routes. The unit cost per kilogram of jatropha biolubricant produced using the additive-based route was lower than chemically modified biolubricants. Due to a high microalgal oil feedstock cost, the unit cost per kilogram of additized microalgae oil biolubricant was more than the unit cost of additized Jatropha oil. The techno-economic feasibility of biolubricant production from marine microalgal oil could be improved by adopting a biorefinery approach., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Achieving superlubricity, a state of lubrication where friction nearly vanishes, has become one of the most promising approaches to combat friction-induced energy dissipation and medical device failure. Phospholipids are amphiphilic molecules comprising highly hydrophilic phosphatidylcholine head groups as well as hydrophobic hydrocarbon chains, When solubilized, phospholipids can readily self-assemble to form different structures such as bilayers and vesicles (liposomes). Recently, liposomes have been identified as excellent lubricants, especially in the boundary lubrication regime the most common lubrication status in the field of biotribology. In this review, we summarize recent progress in employing liposomes as key players for employing superlubricity in biomedical applications. The relationship between lipids and liposomes, manufacturing approaches, lubrication regimes, and regulation mechanisms of liposomes are discussed. Finally, we indicate possible future directions for the use of liposome-mediated superlubricity in biomedical applications., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

It is becoming increasingly important to synthesize efficient biomacromolecule lubricants suitable for medical devices. Even though the development of biomimetic lubricants has made great progress, the current system suitable for hydrophobic silicone-based medical devices is highly limited. In this work, we synthesize one kind of novel polysaccharide-derived macromolecule lubricant of chitosan (CS) grafted polyethylene glycol (PEG) chains and catechol groups (CT) (CS-g-PEG-g-CT). CS-g-PEG-g-CT shows good adsorption ability by applying quantitative analysis of quartz crystal microbalance (QCM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and confocal fluorescence imaging technique, as well as the typical shear-thinning feature. CS-g-PEG-g-CT exhibits low and stable coefficients of friction (COFs) (0.01-0.02) on polydimethylsiloxane (PDMS) surfaces at a wide range of mass concentrations in diverse media including pure water, physiological saline, and PBS buffer solution and is even tolerant to various normal loads and sliding frequencies for complex pressurizing or shearing environments. Subsequently, systematic surface characterizations are used to verify the dynamic attachment ability of the CS-g-PEG-g-CT lubricant on the loading/shearing process. The lubrication mechanism of CS-g-PEG-g-CT can be attributed to the synergy of strong adsorption from catechol groups to form a uniform assembly layer, excellent hydration effect from PEG chains, and typical shear-thinning feature to dissipate viscous resistance. Surprisingly, CS-g-PEG-g-CT exhibits efficient lubricity on silicone-based commercial contact lenses and catheters. The current macromolecule lubricant demonstrates great real application potential in the fields of medical devices and disease treatments.