Search

Superalloy is one of the most important material in aerospace, shipbuilding and nuclear power industries. However, due to its excellent structure, its machinability is very poor. High pressure cool...

Superalloys are widely used in the aerospace field and are a typical difficult-to-cut material. When the PCBN tool is used to cut superalloys, there will be problems such as a large cutting force, a high cutting temperature, and gradual tool wear. High-pressure cooling technology can effectively solve these problems. Therefore, this paper carried out an experimental study of a PCBN tool cutting superalloys under high-pressure cooling and analyzed the influence of high-pressure coolant on the characteristics of the cutting layer. The results show that the main cutting force can be reduced by 19~45% and 11~39% when cutting superalloys under high-pressure cooling compared with dry cutting and atmospheric pressure cutting, respectively, in the range of test parameters. The surface roughness of the machined workpiece is less affected by the high-pressure coolant, but the high-pressure coolant can help reduce the surface residual stress. The high-pressure coolant can effectively improve the chip’s breaking ability. In order to ensure the service life of PCBN tools, when cutting superalloys under high-pressure cooling the coolant pressure should not be too high, and 50 bar is more appropriate. This provides a certain technical basis for the efficient cutting of superalloys under high-pressure cooling conditions.

A Gram-negative, strictly aerobic, motile, and rod-shaped bacterial strain G4R7

Background Balloon dilatation with stent implantation has been proved to be an effective option for left iliac vein compression syndrome (LIVCS), but thrombosis may still occur after the operation. Currently, warfarin is used for anticoagulant therapy, but long-term monitoring is required, while rivaroxaban does not need laboratory monitoring, which can simplify treatment. Therefore, this study aimed to compare the efficacy and safety of rivaroxaban and warfarin in anticoagulation. Methods This study is a multicenter, randomized controlled trial. We will recruit 224 patients with thrombotic LIVCS from 9 hospitals. Moreover, these patients will be randomized to either the experimental group (rivaroxaban) or the control group (warfarin plus nadroparin). The primary outcome is stent occlusion rate. Secondary outcomes are quality of life scale survey results, all-cause mortality, anticoagulation-related mortality, and the proportion of participants with stent displacement/fracture, thrombosis, hemorrhage, and other vascular events. Discussion This study will provide reliable, evidence-based clinical evidence for the efficacy and safety of rivaroxaban antithrombotic therapy after stent implantation. Trial registration ClinicalTrials.gov NCT04067505. Registered on August 26, 2019.

Mu Us Sandy Land in China is a very fragile ecological environment due to serious desertification. While attempting to gain insights into the biodiversity of biological soil crusts of Mu Us Sandy Land, a novel bacterial strain, SLN-3T, was isolated. It was phylogenetically placed into the genus Arthrobacter within the family Micrococcaceae based on its 16S rRNA gene sequence. The most closely related species were Arthrobacter ruber MDB1-42T (98.6%) and Arthrobacter agilis DSM 20550T (98.3%). Cells of the novel species were Gram-stain-positive, aerobic, and non-endospore-forming. The values of average nucleotide identity and the digital DNA-DNA hybridization between SLN-3T and MDB1-42T were 84.9% and 21.3%, respectively. The draft genome size of strain SLN-3T was 3.67 Mb, and its genomic G+C content was 68.1%. The predominant cellular fatty acids were anteiso-C15:0 and C17:0 anteiso. Glucose, galactose, and ribose were the whole-cell sugars. The polar lipids consisted of diphosphatidylglycerol, phosphatidylglycerol, phosphatidylinositol, glycolipid, and phospholipid. The peptidoglycan contained lysine, glutamic acid, and alanine. The predominant menaquinone was MK-9(H2). Based on the data from the chemotaxonomic, phylogenetic, and phenotypic evidence, a novel species named Arthrobacter crusticola sp. nov is proposed, whose type strain is SLN-3T (= ACCC 61595T = JCM 33723T).

High-pressure jet coolant assistance was used in the cutting process of Inconel 718. The effects of coolant pressure on cutting force and machined surface quality were researched. As well as the ex...

High temperature and strain will occur in the cutting area during dry milling of contour bevel gears, which causes plastic deformation of the workpiece, resulting in changes in the physical properties of the machined surface’s metamorphic layer, reducing the quality of the workpiece’s machined surface. Therefore, it is necessary to investigate the properties of the metamorphic layer and the work hardening behavior of the machined surfaces of contour bevel gears. The paper first establishes a single-tooth finite element simulation model for a contour bevel gear and extracts the temperature field, strain field and strain rate at different depths from the machined surface. Then, based on the simulation results, the experiment of milling contour bevel gears is carried out, the microscopic properties of the machined metamorphic layer are studied using XRD diffractometer and ultra-deep field microscopy, and the work hardening behavior of the machined metamorphic layer under different cutting parameters is studied. Finally, the influence of the cutting parameters on the thickness of the metamorphic layer of the machined surface is investigated by scanning electron microscopy. The research results can not only improve the surface quality and machinability of the workpiece, but are also significant for increasing the fatigue strength of the workpiece.

Purpose: This study aimed to investigate the effect of distal aortic segmental enlargement (DASE) after thoracic endovascular aortic repair for complicated type B aortic dissection (cTBAD). Materials and Methods: From March 2003 to October 2018, 814 patients with acute cTBAD from 5 medical centers were retrospectively identified. DASE is indicated as the enlargement of distal aortic segmental volume ≥1.6 fold of the preoperative volume compared with the most recent postoperative computed tomography angiography (CTA) scan. Of these patients, 635 (78%) were identified as non-DASE, and 179 (22%) were identified as DASE. Competing risk analysis was performed to compare late death and distal aortic reintervention between the groups. The morphological variables and false lumen thrombosis at 7 aortic levels were measured based on the preoperative CTA and the most recent CTA. Univariate and multivariate Cox regression analyses were used to assess the independent predictors of DASE. Results: The mean follow-up time of the entire cohort was 5.6 years (interquartile range: 2.4–8.3 years). There were total of 208 late deaths, including 94 (14.8%) deaths in non-DASE group versus 114 (63.7%) deaths in the DASE group. Distal aortic reintervention was observed in 89 patients, with 43(6.7%) in the non-DASE group versus 46 (25.7%) in the DASE group. The cumulative incidence of late death and distal aortic reintervention were significantly higher in the DASE than in the non-DASE group (pConclusion: Compared with the non-DASE group, patients with DASE demonstrated a higher rate of late death and distal aortic reintervention. For the cTBAD population, extended stent-graft coverage to the aortic section between diaphragm and celiac artery might serve as a “cost-efficient” cutoff point aiming to reduce the risk of DASE.

A novel gram-negative, aerobic, non-spore-forming, rod-shaped, and non-nitrogen-fixing bacterium, named SPY-1T, was isolated from biological soil crusts collected at Mu Us Sandy Land, China. Based on 16S rRNA sequence similarity, strain SPY-1T was most closely related to Neorhizobium alkalisoli CCTCC AB 2014138T (98.7%), Neorhizobium huautlense CGMCC 1.2538T (98.6%), Neorhizobium galegae DSM 11542T (98.4%), Rhizobium wenxiniae 166T (97.9%), and Rhizobium smilacinae CCTCC AB 2013016T (97.5%). Phylogenetic analysis based on 16S rRNA sequencing and multilocus sequence analysis of partial sequences of atpD-glnII-glnA-recA-ropD-thrC housekeeping genes both indicated that strain SPY-1T was a member of the genus Rhizobium. The draft genome of strain SPY-1T was 4.75 Mb in size, and the G + C content was 60.0%. The average nucleotide identity (ANI) values to N. alkalisoli CCTCC AB 2014138T and R. smilacinae CCTCC AB 2013016T were both 84.0%. The digital DNA–DNA hybridization (dDDH) values to N. alkalisoli CCTCC AB 2014138T and R. smilacinae CCTCC AB 2013016T were 20.9% and 20.2%, respectively. The major cellular fatty acids were summed feature 8 (C18:1ω7c and/or C18:1ω6c) and C16:0. Based on the data from chemotaxonomic, phylogenetic, and phenotypic evidence, strain SPY-1T represents a novel species in the genus Rhizobium, for which the name Rhizobium deserti sp. nov. is proposed. The type strain is SPY-1T (= ACCC 61627T = JCM 33732T).

Background We sought to evaluate the feasibility, safety, and effectiveness of single-stage endovascular treatment with AngioJet rheolytic thrombectomy followed by stenting for iliac vein compression syndrome (IVCS) with secondary acute iliofemoral deep vein thrombosis (DVT). Methods We conducted a multiple-center prospective nonrandomized study to enroll patients with left-sided acute iliac-common femoral DVT secondary to IVCS. We performed AngioJet rheolytic thrombectomy followed by stenting to evaluate the success rate, periprocedural complications, hospital stay, clinical outcomes, and stent-patency rate. Results A prospective cohort study of 19 consecutive patients diagnosed with IVCS and secondary acute iliac-common femoral DVT from October 2014 to April 2017 was conducted. The technique success rate was 94.7%, and the mean procedure time was 77 minutes. The 1-year primary and secondary patency rate was 84.2% and 94.7%, respectively. Conclusions Single-staged endovascular treatment with AngioJet rheolytic thrombectomy and stenting is feasible, safe, and effective for IVCS with secondary acute iliofemoral DVT.

Zinc-Tin-Oxide (ZTO) thin films were fabricated using a simple and eco-friendly sol-gel method and their application in thin film transistors (TFTs) was investigated. Annealing temperature has a crucial influence on the structure and electrical properties of sol-gel ZTO thin films. The ZTO thin films annealed at 300–600 °C revealed smooth and uniform surfaces with amorphous state, in addition, a high optical transparency over 90% of the ZTO films in the visible range was obtained. The electrical performance of ZTO TFTs showed obvious dependence on annealing temperature. The ZTO TFTs annealed at 500 °C showed a high carrier mobility of 5.9 cm2/V, high on/off current ratio (Ion/off) of 106-107, and threshold voltage (Vth) of 1.03 V. To demonstrate the application of sol-gel ZTO films in low-power display fields, we also fabricated ZTO TFTs with a solution-processed high-permittivity (high-k) ZrTiOx dielectric layer. The ZTO/ZrTiOx TFTs showed high mobility of 17.9 cm2/V and Ion/off of 105-106 at a low operation voltage of 3 V, indicating that Indium-free ZTO thin films would be potential candidates for low cost, high performance oxide TFT devices.

A Gram-stain-negative, rod-shaped bacterium, designated as strain GL-C-18T, was isolated from soil sample collected at Mu Us Sandy Land, China, and its taxonomic position was investigated using a polyphasic approach. Growth was observed in the presence of 0–1 % (w/v) NaCl (optimum, 0 %), pH 6.0–9.0 (optimum, pH 7.0–8.0) and 20–37 °C. On the basis of 16S rRNA gene sequence similarity, strain GL-C-18T belonged to the family Sphingomonadaceae and was most closely related to Sphingosinicella vermicomposti YC7378T (95.7 %), Sphingomonas oligophenolica S213T (95.0 %) and Sphingobium boeckii 301T (94.8 %). The draft genome of strain GL-C-18T was 6.09 Mb, and the G+C content was 66.0 %. The average nucleotide identity value to Sphingosinicella vermicomposti YC7378T was 83.7 %. The predominant respiratory quinone was Q-10. The major fatty acids were C18 : 1ω7c, summed feature 3 (C16 : 1 ω7c and/or C16 : 1 ω6c), C16:0 and C14 : 0 2OH. The main polar lipids were sphingoglycolipid, diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine and phosphatidylcholine. On the basis of chemotaxonomic, phylogenetic and phenotypic evidence, strain GL-C-18T represents a novel species of the genus Sphingomonas , for which the name Sphingomonas deserti sp. nov. is proposed. The type strain is GL-C-18T (=ACCC 60076T=KCTC 62411T).

The effect of flank wear on the cutting process of PCBN tool machining GH4169 superalloy under high-pressure cooling conditions was studied in this article. First of all, the cutting models of different flank wear under conventional cooling and coolant pressure of 50 bar were established by the Third Wave AdvantEdge. Secondly, under the same wear state, the author compared the simulation results of high-pressure cooling with that of conventional cooling. Simultaneously, the influence of flank wear width(VB) on cutting force, the temperature of the machining zone, and surface residual stress during coolant pressure of 50 bar was discussed. Finally, the PCBN tool life forecasting model was established by a method of the GA-BP neural network, and then the generalization ability of the forecasting model was evaluated by 6-fold cross-validation method. The results show that high-pressure cooling cutting effectively grows down the cutting force and temperature generated during the cutting process, and with the rise of flank wear width(VB), the cutting force, the temperature of the machining zone, and residual stress values show an increasing trend. The main reason is that the aggravated flank wear results in strong extrusion friction and plastic deformation in the contact area between the tool and the workpiece, which has different effects on the force-thermal characteristics.

Objectives Research in the field of lower extremity vascular disease has increased in popularity over the years. To adequately characterize and validate the effectiveness of vascular interventions, in vivo experimentation in large animals is required. Thus, it is necessary to find a method to detect the shape and density of blood vessels in the lower extremities that can evaluate and verify the treatment measures’ effectiveness and have high accuracy and repeatability. This study characterized factors that determined both the accuracy and overall value of digital subtraction angiography in lower limb arteriography using a canine animal model. Methods Six beagle dogs were anesthetized and immobilized on the motorized table. The femoral artery was accessed using an indwelling needle. A bolus of contrast agent was injected into the access site, and digital subtraction angiography with bolus chase technology was used to collect contrast images for analysis. At the end of the procedure, the anesthetized dogs were euthanized using an overdose of potassium chloride. After confirming the euthanasia of the dogs, the cadavers were taken to the experimental animal center of Xinjiang Medical University and processed by qualified institutional personnel. Results The final arteriographic images of the hind limbs from all six dogs were precise, and the branches of small vessels could be distinguished without any visible artifacts. Conclusions These results suggested that arteriography using digital subtraction angiography could reveal the shape and density of blood vessels in canine animal models. This method has great potential to significantly improve research related to limb ischemia due to its simple and reproducible results.

Under natural conditions, mycorrhizal symbiosis accompanies nearly the entire life cycle of orchids from seed germination through to flowering and fruiting. Tulasnella-like orchid mycorrhizal fungi are the most common mycorrhizal fungi found in association with orchid species. Presently suitable reference genes have not been systematically selected for the quantification of gene expression via Real-Time Quantitative Reverse Transcription PCR (RT-qPCR). We evaluated 12 candidate Tulasnella genes in nine different Tulasnella isolates and in the Dendrobium-fungal symbiotic germination associations followed by statistical analysis using the programs Bestkeeper, geNorm, and Normfinder to analyze the expression stability of the individual genes. The results showed that the EF2, UBC, and PP2A genes had the highest rankings with relatively stable expression levels across the different genotypes and during the symbiotic seed germination process by the three programs, and may be suitable for RT-qPCR normalization. Furthermore, the gene encoding C-5 Sterol desaturase (C5SD) was selected to verify the reliability of EF2, UBC, and PP2A expression during the Tulasnella-Dendrobium symbiotic seed germination process. This study is the first systematic exploration of optimal reference genes for gene expression studies during the colonization of orchid seeds by the mycorrhizal fungus Tulasnella.

Additional file 2. SPIRIT checklist.

Additional file 3. Informed consent.

Additional file 4. Supplementary Appendix.

Additional file 1. English translation of ethical approval document.

A Gram-stain-negative, non-motile, aerobic, non-spore-forming, rod-shaped, bacterial strain, designated 5JN-11T, was isolated from Haloxylonammodendron stems in Kumtag desert, Xinjiang province, China. Strain 5JN-11T grew at salinities of 0–6 % (w/v; optimum 0–2 %), a pH of 7.0–9.0 (pH 7.0–8.0) and temperatures of 20–42 °C (28–30 °C). Based on 16S rRNA gene sequences, the strain was designated a member of the genus Sphingobacterium and the phylogenetic analysis showed that strain 5JN-11T shared the highest similarity to Sphingobacterium gobiense H7T, followed by Sphingobacterium chuzhouense DH-5T and Sphingobacterium arenae H-12T. The unfinished draft genome of strain 5JN-11T was 4.69 Mb. The G+C content of strain 5JN-11T was 42.8 mol%. The average nucleotide identity to S. gobiense H7T was 90.5 %. The respiratory quinone was MK-7, and the major polar lipids were phosphatidylethanolamine and phosphoglycolipid. The predominant cellular fatty acids were summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c), iso-C15 : 0 and iso-C17 : 0 3-OH. On the basis of phenotypic, genotypic and phylogenetic evidence, strain 5JN-11T represents a novel species in the genus Sphingobacterium , for which the name Sphingobacterium haloxyli sp. nov. is proposed. The type strain is 5JN-11T (=ACCC 60072T=KCTC 62457T).

Nickel-based superalloy is a kind of typical difficult-to-cut material. Its cutting machinability is poor and chip is not easy to break. The phenomenon of chip plastic side flow has significant inf...

In view of the problem of superalloy difficult to be processed, high pressure cooling is used for machining. In this paper the chip breaking model is described and the cutting force characteristics...

IntroductionInferior vena cava (IVC) filters are commonly used in patients with venous thromboembolism to prevent fatal pulmonary embolism, but the thrombosis risk increases after filter placement. Warfarin is a widely anticoagulant, but long-term monitoring and dose adjustments are required. Anticoagulation with rivaroxaban is more straightforward as it dose not require laboratory monitoring. This study compares the efficacy and safety of rivaroxaban and warfarin as an in anticoagulation therapy for patients with IVC filter placement.Methods and analysisThis is a multicentre, randomised controlled trial. In total, 200 patients with deep vein thrombosis (DVT) with IVC filter implantation from 10 hospitals will be recruited. The patients will be randomised to the experimental group (rivaroxaban) or the control group (nadroparin overlapped with warfarin). The primary outcomes include death of any cause, pulmonary embolism (PE)-related death, bleeding and recurrent PE/DVT. The secondary outcomes include the percentage of other vascular events, IVC filter retrieval failure and net clinical benefits. This study aims to provide reliable, verification for the efficacy and safety of rivaroxaban antithrombotic therapy after IVC filter placement.Ethics and disseminationThe study was approved by the Human Research Ethics Committee of the Second Affiliated Hospital of Zhejiang University School of Medicine (approval number: (2019) 295). The results will be disseminated through presentations at scientific conferences and publications in peer-reviewed journalsTrial registration numberNCT04066764.

A facile, low-cost, and room-temperature UV-ozone (UVO) assisted solution process was employed to prepare zirconium oxide (ZrO x ) films with high dielectric properties. ZrO x films were deposited by a simple spin-coating of zirconium acetylacetonate (ZrAcAc) precursor in the environment-friendly solvent of ethanol. The smooth and amorphous ZrO x films by UVO exhibit average visible transmittances over 90% and energy bandgap of 5.7 eV. Low leakage current of 6.0 × 10 −8 A/cm 2 at 3 MV/cm and high dielectric constant of 13 (100 Hz) were achieved for ZrO x dielectrics at the nearly room temperature. Moreover, a fully room-temperature solution-processed oxide thin films transistor (TFT) with UVO assisted ZrO x dielectric films achieved acceptable performances, such as a low operating voltage of 3 V, high carrier mobility of 1.65 cm 2 V −1 s −1 , and on/off current ratio about 10 4 –10 5 . Our work indicates that simple room-temperature UVO is highly potential for low-temperature, solution-processed and high-performance oxide films and devices.

Serious tool wear and poor chip breaking are the major issues in cutting process of superalloys under normal-pressure cooling. Towards those issues, this paper proposed an experimental evaluation on cutting tool wear of polycrystalline cubic boron nitride (PCBN) in machining of GH4169, a nickel-based superalloys, under high-pressure cooling. The several level pressures of coolant are tested, and then the rake face and flank wear of cutting tool are studied, as well as the cutting forces and the chips. These research result shows that the high-pressure coolant can reduce the wear value VB of inserts flank and the cutting force and is advantageous to chip breaking. Therefore, the machinability of nickel-based superalloys GH4169 can be improved by the high-pressure cooling.

The WRKY family of transcription factors is one of the most important families of plant transcriptional regulators, and the members regulate multiple biological processes. However, there is limited information on WRKYs in Dendrobium officinale. In this study, 52 WRKY family genes of D. officinale were surveyed for the first time. Conserved domain, phylogenetic, exon-intron construction, and expression analyses were performed for the DoWRKY genes. Two major types of intron splicing (PR and VQR introns) were found, and the intron insertion position was observed to be relatively conserved in the conserved DoWRKY domains. The expression profiles of nine DoWRKYs were analyzed in cold- and methyl jasmonate (MeJA)-treated D. officinale seedlings; the DoWRKYs showed significant expression changes at different levels, which suggested their vital roles in stress tolerance. Moreover, the expression trends of most of the DoWRKYs after the simultaneous cold stress and MeJA treatment were the opposite of those of DoWRKYs after the individual cold stress and MeJA treatments, suggesting that the two stresses might have antagonistic effects and affect the adaptive capacity of the plants to stresses. Twelve DoWRKY genes were differentially expressed between symbiotic and asymbiotic germinated seeds; all were upregulated in the symbiotic germinated seeds except DoWRKY16. These differences in expression of DoWRKYs might be involved in promoting in vitro symbiotic germination of seeds with Tulasnella-like fungi. Our findings will be useful for further studies on the WRKY family genes in orchids.

Bamboo and rattan are widely grown for manufacturing, horticulture, and agroforestry. Bamboo and rattan production might help reduce poverty, boost economic growth, mitigate climate change, and protect the natural environment. Despite progress in research, sufficient molecular and genomic resources to study these species are lacking. We launched the Genome Atlas of Bamboo and Rattan (GABR) project, a comprehensive, coordinated international effort to accelerate understanding of bamboo and rattan genetics through genome analysis. GABR includes 2 core subprojects: Bamboo-T1K (Transcriptomes of 1000 Bamboos) and Rattan-G5 (Genomes of 5 Rattans), and several other subprojects. Here we describe the organization, directions, and status of GABR.

Super alloy is widely used in aerospace, ships, petrochemical, etc. Processed surface quality of super alloy plays a key role in the performances in poor working conditions. Surface roughness is si...

A novel gram-negative, aerobic, non-spore-forming, rod-shaped and non-nitrogen fixing bacterium named strain 24NRT was isolated from wild Lilium pumilum bulbs in Fuping, Baoding City, Hebei province, PR China. The 16S rRNA gene sequences of strains 24NRT showed the highest similarity to Neorhizobium alkalisoli DSM 21826T (98.5%) and N. galegae HAMBI 540T (98.1%). Phylogenetic analysis based on 16S rRNA genes and multilocus sequence analysis (MLSA) based on the partial sequences of atpD-glnII-glnA-recA-ropD-thrC housekeeping genes both indicated that strain 24NRT is a member of the genus Neorhizobium. The average nucleotide identity between the genome sequence of strain 24NRT and that of the isolate N. alkalisoli DSM 21826T was 83.1%, and the digital DNA–DNA hybridization was 20.1%. The G+C content of strain 24NRT was 60.3 mol %. The major cellular fatty acids were summed feature 8 (C18:1ω7c and/or C18:1ω6c) and C19:0 cyclo ω8c. Based on phenotypic, phylogenetic, and genotypic data, strain 24NRT is considered to represent a novel species of the genus Neorhizobium, for which the name Neorhizobium lilium sp. nov. is proposed. The type strain is 24NRT (= ACCC 61588T = JCM 33731T).

A gram-stain-negative, aerobic, non-spore-forming, rod-shaped, non-motile bacterium strain R4HLG17T was isolated from Tamarix ramosissima roots growing in Kumtag desert. The strain grew at salinities of 0–16% (w/v) NaCl (optimum 5–6%), pH 5–9 (optimum 7) and at 16–45 °C. Based on 16S rRNA gene sequence similarity, strain R4HLG17T belonged to the family Halomonadaceae and was most closely related to Halomonas lutea DSM 23508T(95.1%), followed by Halotalea alkalilenta AW-7T(94.8%), Salinicola acroporae S4-41T(94.8%), Salinicola halophilus CG4.1T(94.6%), and Larsenimonas salina M1-18T(94.4%). Multilocus sequence analysis (MLSA) based on the partial sequences of 16S rRNA, atpA, gyrB, rpoD, and secA genes indicated that the strain R4HLG17T formed an independent and monophyletic branch related to other genera of Halomonadaceae, supporting its placement as a new genus in this family. The draft genome of strain R4HLG17T was 3.6 Mb with a total G + C content of 55.1%. The average nucleotide identity to Halomonas lutea DSM 23508T was 83.5%. Q-9 was detected as the major respiratory quinone and summed feature 8 (C18:1ω7c/C18:1ω6c), summed feature 3 (C16:1ω7c/C16:1ω6c), and C16:0 as predominant cellular fatty acids. On the basis of chemotaxonomic, phylogenetic, and phenotypic evidence, strain R4HLG17T is concluded to represent a novel species of a new genus within Halomonadaceae, for which the name Phytohalomonas tamaricis gen. nov., sp. nov., is proposed. The type strain is R4HLG17T (=ACCC 19929T=KCTC 52415T).

Thoracic aortic aneurysm (TAA) is fatal diseases, which leads to aortic rupture and sudden death. Blood pressure-lowering drugs are ineffective for most of the patients. Our previous study demonstrated the inhibition of endothelial secreted miR-126–3p by rapamycin ameliorate the aneurysmal phenotype of smooth muscle cells (SMCs) in vitro. Hence, this study aimed to evaluate the modulation and mechanism of miR-126–3p in a murine model of TAA (Fbn1C1039G/+). Our results showed that noticeable disturbed flow (DF) was observed in the aorta of Fbn1C1039G/+ mice, and the expression of miR-126–3p was significantly increased under the DF in the cell chamber. This finding was also confirmed by tests in the corresponding DF area of the human aortic aneurysm tissue. Constant rapamycin administration significantly ameliorates the incidence and severity of Fbn1C1039G/+ mice characterized by decreased aortic media degradation, macrophage infiltration and MMP2/9 expression in the aortic wall. Mechanistic studies showed that rapamycin attenuates TAA progression by inhibiting miR-126–3p through ERK1/2 inactivation.

Background Catheter-directed thrombolysis (CDT) is an effective method for the treatment of deep venous thrombosis (DVT). The most widely used puncture technique involves the popliteal vein of the affected leg. We introduce a new puncture technique based on bony landmark positioning. Methods Between May 2012 and December 2014, we performed CDT in 96 cases of DVT using the puncture technique. The procedure is performed with the patient in the prone position on the angiography table. The popliteal vein is punctured according to tibial bony landmarks under fluoroscopic guidance. The needle puncture is made from the popliteal crease, along the direction of tibial lateral intercondylar eminence and parallel to the vertical axis. An introducer sheath is inserted after successful puncture followed by placement of a perfusion catheter of appropriate length in the thrombus. Results Technical success was achieved in 83 cases, with a success rate of 86.46% (83/96). The mean operation time was 38.6 ± 16.8 min, the mean fluoroscopy time was 11.3 ± 4.9 min, the mean effective dose (ED) was 77.2 ± 25.4 mGy, the mean dose-area product (DAP) was 3,927.5 ± 1,261 cGy cm 2 . Compared with catheterization via incised ipsilateral small saphenous and contralateral femoral veins, the technique significantly shortened the operation and the X-ray exposure and reduced the dosage of ED and DAP. Conclusions Popliteal vein puncture technique based on bony landmark positioning is a user-friendly alternative to CDT, especially in the absence of ultrasound localization.

A Gram-negative rod, designated strain 1N-3T, was isolated from a rhizome of Phragmites australis grown in Kumtag Desert, China. Phylogenetic analysis showed that the strain is closely related to Phyllobacterium salinisoli LMG 30173T with 99.0% sequence similarity in the 16S rRNA gene and 92.9% in the atpD gene. Growth was observed at salinities of 0–4% (w/v), over a pH range of 5.0–10.0 (optimum 8.0) and at temperatures of 15–40 °C (optimum 30 °C). The predominant cellular fatty acids were identified as summed feature 8 (C18:1ω7c/C18:1ω6c). The G+C content of strain 1N-3T was determined to be 60.1%. Based on phenotypic, chemotaxonomic, phylogenetic properties and genomic comparison, it is concluded that strain 1N-3T represents a novel species of the genus Phyllobacterium, for which the name Phyllobacterium phragmitis sp. nov. is proposed. The type strain is 1N-3T (=KCTC 62183T =ACCC 60071T).

Strain N5SSJ16T, a Gram-negative-staining, non-spore-forming, rod-shaped, non-motile bacterium, was isolated from Haloxylon ammodendron stems. The strain grew in the presence of 0–4 % (w/v) NaCl (optimum growth in the absence of NaCl), at pH 7–9 (optimum: pH 8) and at 12–50 °C. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain N5SSJ16T was related phylogenetically to Parapedobacter composti 4M40T (96.5 %) and Parapedobacter luteus 4M29T (95.9 %). The cellular fatty acids were iso-C15 : 0, summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c), summed feature 9 (C16 : 0 10-methyl and/or iso-C17 : 1ω9c) and iso-C17 : 0 3-OH. MK-7 was the respiratory quinone. The main polar lipids were phosphatidylethanolamine, unidentified aminophospholipid and two unknown lipids. The G+C content of the DNA was 45.8 mol%. On the basis of chemotaxonomic, phylogenetic and phenotypic evidence, strain N5SSJ16T represents a novel species of the genus Parapedobacter , for which the name Parapedobacter deserti sp. nov. is proposed. The type strain is N5SSJ16T (=ACCC 19928T=KCTC 52416T).

This paper reports a low-energy pressure-free hydrothermal fabrication of α-Ni(OH)2 nanosheet arrays (NSAs) as effective electrodes for binder-free aqueous supercapacitors. The hydrothermal temperature was critical for the microstructure and electrochemical properties. At the low temperature of 95 °C, a highly interlaced α-Ni(OH)2 NSA was achieved. The successful preparation of uniform α-Ni(OH)2 NSAs was confirmed by several characterization techniques. For electrode applications in sustainable supercapacitors,the present α-Ni(OH)2 NSAs revealed a great capacitance of 1759 F/g, great rate capability of 50% at 20 A/g, and great cycle stability of 90.3% after 5000 cycles. Furthermore, aqueous two-electrode supercapacitors made of Ni(OH)2 NSAs possessed a large energy density of 44.5 Wh/kg at 400 W/kg. Therefore, this reduced energy hydrothermal preparation of α-Ni(OH)2 NSAs has great potential for efficient sustainable energy device applications.

Two Gram-staining-negative, aerobic, non-spore-forming rod-shaped, non-motile bacteria, designated strains R156-2T and T58-2 were isolated from the roots of Cymbidium goeringii. The colonies were yellow-pigmented. On the basis of 16S rRNA gene sequence similarity, strains R156-2T and T58-2 were shown to be members of the genus Chitinophaga . Strains R156-2T and T58-2 showed the greatest level of sequence similarity with Chitinophaga niabensis (96.0–96.3 %). The major menaquinone was MK-7. The main cellular fatty acids were iso-C15 : 0, C16 : 1ω5c and iso-C17 : 0 3-OH. Phenotypic and genotypic analyses indicated that strains R156-2T and T58-2 could not be assigned to any recognized species. Therefore, strains R156-2T and T58-2 represent a novel species of the genus Chitinophaga , for which the name Chitinophaga cymbidii sp. nov. is proposed. The type strain is R156-2T ( = ACCC 05363T = KCTC 23738T). The DNA G+C content of this strain is 51.9 mol%.