Search

A series of conjugated polymers bearing thiophene‐based donors and pyromellitic diimide (PMDI) acceptor were prepared, and their electrochromic (EC) properties were studied via using fabricated thin‐film EC devices. It was observed that structurally regular alternating polymers with fewer (1 and 2) thiophene donors do not exhibit any EC properties while increasing the number of donors eventually led to the emergence of orange‐red‐to‐green colour switching. On this basis, two more random co‐polymers containing higher donor‐to‐acceptor ratios were synthesized to further improve EC switching properties. The two polymers, which bear a PMDI‐to‐thiophene ratio of ca. 1 : 7 and 1 : 8, revealed orange red‐to‐blue colour switching and generally improved optical contrasts and switching speeds in both the visible and near infra‐red (NIR) region. In addition, the subtle modulation of polymer colour and hue via variation of the number of thiophene donors was evident through colorimetric study. This work therefore demonstrates the potential and possibility of using the PMDI acceptor unit to construct EC‐active conjugated polymers, and considerations for future tuning of colour and switching performances. [ABSTRACT FROM AUTHOR]

Fe–N–C catalysts are emerging as promising alternatives to Pt‐based catalysts for the oxygen reduction reaction (ORR), while they still suffer from sluggish reaction kinetics due to the discontented binding affinity between the Fe‐N4 sites and oxygen‐containing intermediates, and unsatisfactory stability. Herein, a flexible multichannel carbon fiber membrane immobilized with atomically dispersed Fe‐N4 sites and neighboring Fe nanoclusters/nanoparticles (FeN4‐FeNCP@MCF) is synthesized. The optimized geometric and electronic structures of the Fe atomic sites brought by adjacent Fe nanoclusters/nanoparticles and hierarchically porous structure of the carbon matrix endow FeN4‐FeNCP@MCF with outstanding ORR activity and stability, considerably outperforming its counterpart with FeN4 sites only and the commercial Pt/C catalyst. Liquid and solid‐state flexible zinc–air batteries employing FeN4‐FeNCP@MCF both exhibit outstanding durability. Theoretical calculation reveals that the Fe nanoclusters can trigger remarkable electron redistribution of the FeN4 sites and modulate the hybridization of central Fe 3d and O 2p orbitals, facilitating the activation of O2 molecules and optimizing the adsorption capacity of oxygen‐containing intermediates on FeN4 sites, and thus accelerating the ORR kinetic. This work offers an effective approach to constructing coupling catalysts that have single atoms coexisting with nanoclusters/nanoparticles for efficient ORR catalysis. [ABSTRACT FROM AUTHOR]

Supercritical CO2 (scCO2) extrusion foamed high-melt-strength (HMS) polypropylene (PP) often suffers from low cell density, large cell sizes, and poor cell structure uniformity due to the poor nucleation rates of CO2 in the PP. To remedy this, various inorganic fillers have been used as heterogeneous nucleation agents. Although their efficient nucleation effects have been demonstrated, the preparation of these fillers causes some adverse effects on the environment/human health or involves relatively expensive processes or non-eco-friendly chemicals. In this work, biomass-based lignin is studied as a sustainable, lightweight, and cost-effective nucleating agent. It is found that scCO2 could assist in situ dispersion of lignin in the PP in the foaming process, leading to significantly increased cell density, smaller cells, and improved cell uniformity. The Expansion Ratio is also simultaneously improved due to reduced diffusive gas loss. The PP/lignin foams with low lignin loadings exhibit higher compression moduli and plateau strengths than the PP foams with the same densities owing to the improved cell uniformity and probably also the reinforcing effect of the small lignin particles in cell walls. Moreover, the energy absorption capability of the PP/lignin foam with 1 wt% lignin could match the PP foam with similar compression plateau strengths; even the density of the former is 28% lower than the latter. Therefore, this work provides a promising approach to a cleaner and more sustainable production of HMS PP foams. [ABSTRACT FROM AUTHOR]