Search

Flexible electrochromic devices (FECDs) are widely explored for diverse applications including wearable electronics, camouflage, and smart windows. However, the manufacturing process of patterned FECDs remains complex, costly, and non‐customizable. To address this challenge, a strategy is proposed to prepare integrated FECDs via multi‐material direct writing 3D printing. By designing novel viologen/polyvinyl alcohol (PVA) hydrogel inks and systematically evaluating the printability of various inks, seamless interface integration can be achieved, enabling streamlined manufacturing of patterned FECDs with continuous production capabilities. The resultant 3D‐printed FECDs exhibit excellent electrochromic and mechanical properties, including high optical contrast (up to 54% at 360 nm), nice cycling stability (less than 5% electroactivity reduction after 10 000 s), and mechanical stability (less than 19% optimal contrast decrease after 5000 cycles of bending). The potential applications of these 3D‐printed hydrogel‐based FECDs are further demonstrated in wearable electronics, camouflage, and smart windows. [ABSTRACT FROM AUTHOR]

This study presents the development of flexible piezoelectric nanogenerators (PENGs) utilizing graphitic carbon nitride (g-C3N4) nanoflakes (CNNFs) and polyvinylidene fluoride (PVDF) composites fabricated via the direct ink writing (DIW) 3D printing method. A novel approach of synthesizing CNNFs using the ethanol exfoliation method was demonstrated, which significantly reduces preparation time and cost compared to traditional acid exfoliation. The CNNFs are incorporated into PVDFs at varying weight percentages (5, 7.5, 10, and 15 wt.%) to optimize the β-phase content and piezoelectric properties. Characterization techniques including XRD, FTIR, and FESEM confirm the successful synthesis and alignment of nanoflakes inside the PVDF matrix. The film with 7.5% CNNF achieves the highest performance, exhibiting a peak output voltage of approximately 6.5 V under a 45 N force. This study also explores the effects of UV light exposure. Under a UV light, the film exhibits an output voltage of 8 V, indicating the device's durability and potential for practical applications. The fabricated device showed significant voltage outputs during various human motions, confirming its suitability for wearable self-powered IoT applications. This work highlights the efficacy of the ethanol exfoliation method and the DIW printing technique in enhancing the performance of flexible PENGs. [ABSTRACT FROM AUTHOR]

Aqueous zinc‐ion batteries (AZIBs) based on vanadium oxides or sulfides are promising candidates for large‐scale rechargeable energy storage due to their ease of fabrication, low cost, and high safety. However, the commercial application of vanadium‐based electrode materials has been hindered by challenging problems such as poor cyclability and low‐rate performance. To this regard, sophisticated nanostructure engineering technology is used to adeptly incorporate VS2 nanosheets into the MXene interlayers to create a stable 2D heterogeneous layered structure. The MXene nanosheets exhibit stable interactions with VS2 nanosheets, while intercalation between nanosheets effectively increases the interlayer spacing, further enhancing their stability in AZIBs. Benefiting from the heterogeneous layered structure with high conductivity, excellent electron/ion transport, and abundant reactive sites, the free‐standing VS2/Ti3C2Tz composite film can be used as both the cathode and the anode of AZIBs. Specifically, the VS2/Ti3C2Tz cathode presents a high specific capacity of 285 mAh g−1 at 0.2 A g−1. Furthermore, the flexible Zn‐metal free in‐plane VS2/Ti3C2Tz//MnO2/CNT AZIBs deliver high operation voltage (2.0 V) and impressive long‐term cycling stability (with a capacity retention of 97% after 5000 cycles) which outperforms almost all reported Vanadium‐based electrodes for AZIBs. The effective modulation of the material structure through nanocomposite engineering effectively enhances the stability of VS2, which shows great potential in Zn2+ storage. This work will hasten and stimulate further development of such composite material in the direction of energy storage. [ABSTRACT FROM AUTHOR]

Before steel can be utilized, pickling is necessary to remove surface oxidation products. However, as the ferrous ion concentration in the pickling solution increases, the pickling rate significantly diminishes, necessitating the treatment of spent pickling solution (SPS) to mitigate its hazardous effects prior to disposal. Current industrial methods predominantly rely on neutralization and precipitation techniques, which are cost-prohibitive and generate substantial by-products, thus failing to meet environmental protection standards. In this study, a new method, which is based on the formation of FeC2O4·2H2O precipitate in a strong acid solution, is proposed to treat the SPS. Initially, the SPS undergoes a two-step impurity removal process, followed by the controlled addition of oxalic acid dihydrate (H2C2O4·2H2O) to precipitate iron. The resulting precipitate is filtered, washed, and vacuum-dried, and the regenerated acid is recycled back into the pickling tank. When 1 g/10 mL of H2C2O4·2H2O is used, the iron removal rate achieves 60%, and the acidity of the regenerated acid increases by 11.3%. X-ray diffraction pattern (XRD) and thermogravimetric–differential scanning calorimetry (TG-DSC) characterization showed that the precipitate was α-FeC2O4·2H2O, with an average particle size of about 3.19 μm and a purity of 95.24%. This process innovatively achieves efficient recycling of acid and iron resources, offering a potential solution to the industrial challenge of difficult SPS treatment in the steel industry and meeting the urgent need for sustainable development. [ABSTRACT FROM AUTHOR]

High‐density surface electromyography (sEMG) electrode arrays enable the recording of tens to hundreds of channels of electromyographic signals, which have found wide applications in clinics and human‐machine interfaces. However, current manufacturing technologies of high‐density sEMG electrode arrays generally involve high‐cost equipments, complicated procedures, and insufficient programmability, severely hampering the rational design and practical applications of customized yet cost‐effective high‐density electrode arrays. Herein, the facile and efficient fabrication of novel 32‐channel soft high‐density sEMG electrode arrays by an all‐printed technique based on multimaterial direct ink writing 3D printing is presented. By employing rational four‐layer stacked structure designs with systematic ink printability evaluation, it can successfully realize seamless interfacial integration during the multimaterial printing, achieving reproducible, programmable, continuous fabrication of soft high‐density sEMG electrode arrays. The all 3D‐printed soft electrode arrays exhibit excellent stability, low impedance, and high signal‐to‐noise ratio superior to commercial products with an increase of 32.2%. Such intriguing properties enable this all 3D‐printed electrode arrays the unique capability of mapping muscle activation of the forearm, and the motor unit action potential trains can be precisely identified for varying hand gestures to effectively explore the innovative human‐machine interface toward diverse applications such as teleoperation and prosthetic control. [ABSTRACT FROM AUTHOR]