Search

Radially extended disk winds could be the key to unlocking how protoplanetary disks accrete and how planets form and migrate. A distinctive characteristic is their nested morphology of velocity and chemistry. Here we report JWST/NIRSpec spectro-imaging of four young stars with edge-on disks in the Taurus star-forming region that demonstrate the ubiquity of this structure. In each source, a fast collimated jet traced by [Fe II] is nested inside a hollow cavity within wider lower-velocity H2 and, in one case, also CO ro-vibrational (v=1-0) emission. Furthermore, in one of our sources, ALMA CO(2-1) emission, paired with our NIRSpec images, reveals the nested wind structure extends further outward. This nested wind morphology strongly supports theoretical predictions for wind-driven accretion and underscores the need for theoretical work to assess the role of winds in the formation and evolution of planetary systems, Comment: This preprint has not undergone peer review or any post-submission improvements or corrections. The Version of Record of this article is published in Nature Astronomy and is available online at https://doi.org/10.1038/s41550-024-02385-7

Matrix-vector multiplications are a fundamental building block of artificial intelligence; this essential role has motivated their implementation in a variety of physical substrates, from memristor crossbar arrays to photonic integrated circuits. Yet their realization in soft-matter intelligent systems remains elusive. Here, we experimentally demonstrate a reprogrammable elastic metamaterial that computes matrix-vector multiplications using floppy modes -- deformations with near-zero stored elastic energy. Floppy modes allow us to program complex deformations without being hindered by the natural stiffness of the material; but their practical application is challenging, as their existence depends on global topological properties of the system. To overcome this challenge, we introduce a continuously parameterized unit cell design with well-defined compatibility characteristics. This unit cell is then combined to form arbitrary matrix-vector multiplications that can even be reprogrammed after fabrication. Our results demonstrate that floppy modes can act as key enablers for embodied intelligence, smart MEMS devices and in-sensor edge computing., Comment: 9 pages, 6 figures

Molecular clouds are the most important incubators of young stars clustered in various stellar structures whose spatial extension can vary from a few AU to several thousand AU. Although the reality of these stellar systems has been established, the physical origin of their multiplicity remains an open question. Our aim was to characterise these stellar groups at the onset of their formation by quantifying both the number of stars they contain and their mass using a hierarchical fragmentation model of the natal molecular cloud. We developed a stochastic and predictive model that reconciles the continuous multi-scale structure of a fragmenting molecular cloud with the discrete nature of the stars that are the products of this fragmentation. This model was implemented within a gravo-turbulent fragmentation framework to analytically follow the fragmentation properties along spatial scales using an isothermal and adiabatic equations of state (EOSs). Using an adiabatic EOS we determined a characteristic spatial scale where further fragmentation is prevented, around a few tens of AU. We show that fragmentation is a self-regulated process as fragments tend to become marginally unstable following a $M \propto R$ Bonnor-Ebert-like mass-size profile. Supersonic turbulent fragmentation structures the cloud down to $R \approx 0.1$ pc, and gradually turns into a less productive Jeans-type fragmentation under subsonic conditions so hierarchical fragmentation is a scale dependant process. Our work suggests that pre-stellar objects resulting from gas fragmentation, have to progressively increase their accretion rate in order to form stars. A hierarchical fragmentation scenario is compatible with both the multiplicity of stellar systems identified in Taurus and the multi-scale structure extracted within NGC 2264 molecular cloud.

The stellar initial mass function (IMF) is critical to our understanding of star formation and the effects of young stars on their environment. On large scales, it enables us to use tracers such as UV or Halpha emission to estimate the star formation rate of a system and interpret unresolved star clusters across the universe. So far, there is little firm evidence of large-scale variations of the IMF, which is thus generally considered universal. Stars form from cores and it is now possible to estimate core masses and compare the core mass function (CMF) with the IMF, which it presumably produces. The goal of the ALMA-IMF large program is to measure the core mass function at high linear resolution (2700 au) in 15 typical Milky Way protoclusters spanning a mass range of 2500 to 32700 Msun. In this work, we used two different core extraction algorithms to extract about 680 gravitationally bound cores from these 15 protoclusters. We adopt per core temperature using the temperature estimate from the PPMAP Bayesian method. A power-law fit to the CMF of the sub-sample of cores above the 1.64 Msun completeness limit, 330 cores, through the maximum likelihood estimate technique yields a slope of 1.97 +/- 0.06, significantly flatter than the 2.35 Salpeter slope. Assuming a self-similar mapping between the CMF and the IMF, this result implies that these 15 high-mass protoclusters will generate atypical IMFs. This sample is the largest to date produced and analysed self-consistently, derived at matched physical resolution, with per-core temperature estimates and cores as massive as 150 Msun. We provide the raw source extraction catalogues and the source derived size, temperature, mass, and spectral indices in the 15 protoclusters., Comment: Accepted by A&A

A crucial aspect in addressing the challenge of measuring the core mass function, that is pivotal for comprehending the origin of the initial mass function, lies in constraining the temperatures of the cores. We aim to measure the luminosity, mass, column density and dust temperature of star-forming regions imaged by the ALMA-IMF large program. High angular resolution mapping is required to capture the properties of protostellar and pre-stellar cores and to effectively separate them from larger features, such as dusty filaments. We employed the point process mapping (PPMAP) technique, enabling us to perform spectral energy distribution fitting of far-infrared and submillimeter observations across the 15 ALMA-IMF fields, at an unmatched 2.5" angular resolution. By combining the modified blackbody model with near-infrared data, we derived bolometric luminosity maps. We estimated the errors impacting values of each pixel in the temperature, column density, and luminosity maps. Subsequently, we employed the extraction algorithm getsf on the luminosity maps in order to detect luminosity peaks and measure their associated masses. We obtained high-resolution constraints on the luminosity, dust temperature, and mass of protoclusters, that are in agreement with previously reported measurements made at a coarser angular resolution. We find that the luminosity-to-mass ratio correlates with the evolutionary stage of the studied regions, albeit with intra-region variability. We compiled a PPMAP source catalog of 313 luminosity peaks using getsf on the derived bolometric luminosity maps. The PPMAP source catalog provides constraints on the mass and luminosity of protostars and cores, although one source may encompass several objects. Finally, we compare the estimated luminosity-to-mass ratio of PPMAP sources with evolutionary tracks and discuss the limitations imposed by the 2.5" beam., Comment: 35 pages, 19 figures, 5 tables Accepted by A&A

We use the H$41\alpha$ recombination line to create templates of the millimeter free-free emission in the ALMA-IMF continuum maps, which allows to separate it from dust emission. This method complements spectral-index information and extrapolation from centimeter wavelength maps. We use the derived maps to estimate the properties of up to 34 HII regions across the ALMA-IMF protoclusters. The hydrogen ionizing-photon rate $Q_0$ and spectral types follow the evolutionary trend proposed by Motte et al. The youngest protoclusters lack detectable ionized gas, followed by protoclusters with increasing numbers of OB stars. The total $Q_0$ increases from $\sim 10^{45}$ s$^{-1}$ to $> 10^{49}$ s$^{-1}$. We used the adjacent He$41\alpha$ line to measure the relative number abundances of helium, finding values consistent with the Galactic interstellar medium, although a few outliers are discussed. A search for sites of maser amplification of the H$41\alpha$ line returned negative results. We looked for possible correlations between the electron densities ($n_e$), emission measures (EM), and $Q_0$ with HII region size $D$. The latter are the better correlated, with $Q_0 \propto D^{2.49\pm0.18}$. This favors interpretations where smaller ultracompact HII regions are not necessarily the less dynamically evolved versions of larger ones, but rather are ionized by less massive stars. Moderate correlations were found between dynamical width $\Delta V_\mathrm{dyn}$ with $D$ and $Q_0$. $\Delta V_\mathrm{dyn}$ increases from about one to two times the ionized-gas sound speed. Finally, an outlier HII region south of W43-MM2 is discussed. We suggest that this source could harbor an embedded stellar or disk wind., Comment: Accepted to AAS Journals (ApJS). Data available at https://dataverse.harvard.edu/dataverse/h41a-freefree

The tensor cross interpolation (TCI) algorithm is a rank-revealing algorithm for decomposing low-rank, high-dimensional tensors into tensor trains/matrix product states (MPS). TCI learns a compact MPS representation of the entire object from a tiny training data set. Once obtained, the large existing MPS toolbox provides exponentially fast algorithms for performing a large set of operations. We discuss several improvements and variants of TCI. In particular, we show that replacing the cross interpolation by the partially rank-revealing LU decomposition yields a more stable and more flexible algorithm than the original algorithm. We also present two open source libraries, xfac in Python/C++ and TensorCrossInterpolation.jl in Julia, that implement these improved algorithms, and illustrate them on several applications. These include sign-problem-free integration in large dimension, the superhigh-resolution quantics representation of functions, the solution of partial differential equations, the superfast Fourier transform, the computation of partition functions, and the construction of matrix product operators., Comment: 73 pages, 14 figures, codes at http://tensor4all.org

Measuring instructors' adoption of learning management system (LMS) tools is a critical first step in evaluating the efficacy of online teaching and learning at scale. Existing models for LMS adoption are often qualitative, learner-centered, and difficult to leverage towards institutional support. We propose depth-of-use (DOU): an intuitive measurement model for faculty's utilization of a university-wide LMS and their needs for institutional support. We hypothesis-test the relationship between DOU and course attributes like modality, participation, logistics, and outcomes. In a large-scale analysis of metadata from 30000+ courses offered at Virginia Tech over two years, we find that a pervasive need for scale, interoperability and ubiquitous access drives LMS adoption by university instructors. We then demonstrate how DOU can help faculty members identify the opportunity-cost of transition from legacy apps to LMS tools. We also describe how DOU can help instructional designers and IT organizational leadership evaluate the impact of their support allocation, faculty development and LMS evangelism initiatives., Comment: CSCW 2024 (accepted for publication)

The ALMA-IMF Large Program provides multi-tracer observations of 15 Galactic massive protoclusters at matched sensitivity and spatial resolution. We focus on the dense gas kinematics of the G353.41 protocluster traced by N$_2$H$^+$ (1$-$0), with an spatial resolution $\sim$0.02 pc. G353.41, at a distance of $\sim$2 kpc, has a mass of $\sim$2500 M$_{\odot}$ within $1.3\times1.3$ pc$^2$. We extract the N$_2$H$^+$ isolated line component and we decompose it by fitting up to 3 Gaussian velocity components. This allows us to identify velocity structures that are impossible to identify in the traditional position-velocity diagram. We identify multiple velocity gradients on large ($\sim$1 pc) and small scales ($\sim$0.2 pc). We find good agreement between the N$_2$H$^+$ velocities and the previously reported DCN core velocities, suggesting that cores are kinematically coupled to the dense gas in which they form. We measure 9 converging ``V-shaped'' velocity gradients ($\sim20$ km/s/pc), located in filaments, which are sometimes associated with cores near their point of convergence. The average inflow timescale is $\sim67$ kyr, or about twice the free-fall time of cores in the same area ($\sim33$ kyr) but substantially shorter than protostar lifetime estimates ($\sim$0.5 Myr). We derive mass accretion rates in the range of $(0.35-8.77)\,\times\,10^{-4}$ M$_{\odot}$/yr. This feeding might lead to further filament collapse and formation of new cores. We suggest that the protocluster is collapsing on large scales, but the velocity signature of collapse is slow compared to pure free-fall. These data are consistent with a comparatively slow global protocluster contraction under gravity, and faster core formation within, suggesting the formation of multiple generations of stars over the protocluster lifetime., Comment: Accepted in A&A, 22 pages, 21 figures, 1 interactive figure, 4 tables

We study spanners in planar domains, including polygonal domains, polyhedral terrain, and planar metrics. Previous work showed that for any constant $\epsilon\in (0,1)$, one could construct a $(2+\epsilon)$-spanner with $O(n\log(n))$ edges (SICOMP 2019), and there is a lower bound of $\Omega(n^2)$ edges for any $(2-\epsilon)$-spanner (SoCG 2015). The main open question is whether a linear number of edges suffices and the stretch can be reduced to $2$. We resolve this problem by showing that for stretch $2$, one needs $\Omega(n\log n)$ edges, and for stretch $2+\epsilon$ for any fixed $\epsilon \in (0,1)$, $O(n)$ edges are sufficient. Our lower bound is the first super-linear lower bound for stretch $2$. En route to achieve our result, we introduce the problem of constructing non-Steiner tree covers for metrics, which is a natural variant of the well-known Steiner point removal problem for trees (SODA 2001). Given a tree and a set of terminals in the tree, our goal is to construct a collection of a small number of dominating trees such that for every two points, at least one tree in the collection preserves their distance within a small stretch factor. Here, we identify an unexpected threshold phenomenon around $2$ where a sharp transition from $n$ trees to $\Theta(\log n)$ trees and then to $O(1)$ trees happens. Specifically, (i) for stretch $ 2-\epsilon$, one needs $\Omega(n)$ trees; (ii) for stretch $2$, $\Theta(\log n)$ tree is necessary and sufficient; and (iii) for stretch $2+\epsilon$, a constant number of trees suffice. Furthermore, our lower bound technique for the non-Steiner tree covers of stretch $2$ has further applications in proving lower bounds for two related constructions in tree metrics: reliable spanners and locality-sensitive orderings. Our lower bound for locality-sensitive orderings matches the best upper bound (STOC 2022)., Comment: 40 pages, 11 figures. Abstract shorten to meet Arxiv limits

We aim to identify and characterize cores in the high-mass proto-cluster W49, determine their evolutionary stages and measure the associated lifetimes. We built a catalog of 129 cores extracted from an ALMA 1.3 mm continuum image at 0.26" (2900 au) angular resolution. The association between cores and Hyper/Ultra Compact HII (H/UC HII) regions was established from the analysis of VLA 3.3 cm continuum and H30$\alpha$ line observations. We also looked for emission of hot molecular cores (HMCs) using the methyl formate doublet at 218.29 GHz. We identified 40 cores associated with an H/UC HII region and 19 HMCs over the ALMA mosaic. The 52 cores with an H/UC HII region and/or a HMC are assumed to be high-mass protostellar cores, while the rest of the core population likely consists in prestellar cores and low-mass protostellar cores. We found a good agreement between the two tracers of ionized gas, with 23 common detections and only four cores detected at 3.3 cm and not in H30$\alpha$. The spectral indexes from 3.3 cm to 1.3 mm range from 1, for the youngest cores with partially optically thick free-free emission, to about -0.1, that is optically thin free-free emission obtained for cores likely more evolved. Using as a reference the H/UC HII regions, we found the statistical lifetimes of the HMC and massive protostellar phases in W49N to be about $6\times10^4$ yr and $1.4\times10^5$ yr, respectively. We also showed that HMC can co-exist with H/UC HII regions during a short fraction of the core lifetime, about $2\times10^4$ yr. This indicates a rapid dispersal of the inner molecule envelope once the HC HII is formed., Comment: 15 pages, 7 figures. Accepted for publication in A&A

Sites associated with high-mass star and cluster formation exhibit a so-called hot core phase, characterized by high temperatures and column densities of complex organic molecules. We built a comprehensive census of hot core candidates towards the ALMA-IMF protoclusters based on the detection of two CH3OCHO emission lines at 216.1 GHz. We used the source extraction algorithm GExt2D to identify peaks of methyl formate (CH3OCHO) emission that is a complex species commonly observed towards sites of star formation. We built up a catalog of 76 hot core candidates with masses ranging from about 0.2 to 80 Msun , of which 56 are new detections. A large majority of these objects are compact, rather circular, with deconvolved FWHM sizes of about 2300 au on average. About 30% of our sample of methyl formate sources have core masses above 8 Msun within sizes ranging from about 1000 au to 13400 au, which well correspond to archetypical hot cores. The origin of the CH3OCHO emission toward the lower-mass cores can be explained by a mixture of contribution from shocks, or may correspond to objects in a more evolved state, i.e. beyond the hot core stage. We find that the fraction of hot core candidates increases with the core mass. The large fraction of hot core candidates towards the most massive cores suggests that they rapidly enter the hot core phase and feedback effects from the forming protostar(s) impact their environment on short time-scales.

The infinite-parent spatial Lambda-Fleming-Viot (SLFV) process is a model of random growth, in which a set evolves by the addition of balls according to points of an underlying Poisson point process, and which was recently introduced to study genetic diversity in spatially expanding populations. In this article, we give asymptotics for the location and depth of the moving interface, and identify the exact asymptotic scale of the transverse fluctuations of geodesics. Our proofs are based on a new representation of the infinite-parent SLFV in terms of chains of reproduction events, and on the study of the properties of a typical geodesic. Moreover, we show that our representation coincides with the alternative definitions of the process considered in the literature, subject to a simple condition on the initial state. Our results represent a novel development in the study of stochastic growth models, and also have consequences for the study of genetic diversity in expanding populations., Comment: 57 pages, 2 figures

We aimed to measure the CMF in the evolved W33-Main star-forming protocluster to compare it with CMF recently obtained in other Galactic star-forming regions, including the ones included in the ALMA-IMF program. We used observations from the ALMA-IMF large program: 2'x2' maps of emission from the continuum and selected lines at 1.3mm and 3mm observed by the ALMA 12m only antennas. Our angular resolution was typically 1'', that is 2400au at a distance of 2.4kpc. The lines we analysed are CO(2-1), SiO(5-4), N2H+(1-0), H41alpha as well as He41alpha blended with C41alpha. We built a census of dense cores in the region, and we measured the associated CMF based on a core-dependent temperature value. We confirmed the 'evolved' status of W33-Main by identifiying three HII regions within the field, and to a lesser extent based on the number and extension of N2H+ filaments. We produced a filtered core catalog of 94 candidates, that we refined to take into account the contamination of the continuum by free-free and line emission, obtaining 80 cores with masses that range from 0.03 to 13.2Msun. We fitted the resulting high-mass end of the CMF with a single power law of the form N(log(M)) ~ M^alpha, obtaining alpha = -1.44(+0.16)(-0.22), slightly steeper but consistent with the Salpeter index. We categorized our cores in pre- and protostellar, mostly based on outlow activity and hot core nature. We found the prestellar CMF to be steeper than a Salpeter-like distribution, and the protostellar CMF to be slightly top heavy. We found a higher proportion of cores within the HII regions and their surroundings than in the rest of the field. We also found that the cores' masses were rather low (maximum mass of 13Msun).

We present archive Atacama Large Millimeter/Submillimeter Array (ALMA) Band 6 observations of the $^{13}$CO (J=2-1) and $^{12}$CO (J=2-1) molecular line emission of the protostellar system associated with HH 30. The $^{13}$CO molecular line shows the accretion disk while the molecular outflow is traced by the emission of the $^{12}$CO molecular line. We estimated a dynamical mass for the central object of $0.45\pm0.14$ M$_\odot$, and a mass for the molecular outflow of $1.83\pm0.19\times10^{-4}$ M$_\odot$. The molecular outflow presents an internal cavity as well as multiple outflowing shell structures. We distinguish three different shells with constant expansion ($\sim4-6$ km s$^{-1}$) and possible rotation signatures ($\leq0.5$ km s$^{-1}$). We find that the shells can be explained by magnetocentrifugal disk winds with launching radii $R_\mathrm{launch}\lesssim4$ au and a small magnetic lever arm $\lambda\sim1.6-1.9$. The multiple shell structure may be the result of episodic ejections of the material from the accretion disk associated with three different epochs with dynamical ages of $497\pm15$ yr, $310\pm9$ yr, and $262\pm11$ yr for the first, second, and third shells, respectively. The outermost shell was ejected $187\pm17$ yr before the medium shell, while the medium shell was launched $48\pm14$ yr before the innermost shell. Our estimations of the linear and angular momentum rates of the outflow as well as the accretion luminosity are consistent with the expected values if the outflow of HH 30 is produced by a wide-angle disk wind.

Benchmarking drug efficacy is a critical step in clinical trial design and planning. The challenge is that much of the data on efficacy endpoints is stored in scientific papers in free text form, so extraction of such data is currently a largely manual task. Our objective is to automate this task as much as possible. In this study we have developed and optimised a framework to extract efficacy endpoints from text in scientific papers, using a machine learning approach. Our machine learning model predicts 25 classes associated with efficacy endpoints and leads to high F1 scores (harmonic mean of precision and recall) of 96.4% on the test set, and 93.9% and 93.7% on two case studies. These methods were evaluated against - and showed strong agreement with - subject matter experts and show significant promise in the future of automating the extraction of clinical endpoints from free text. Clinical information extraction from text data is currently a laborious manual task which scales poorly and is prone to human error. Demonstrating the ability to extract efficacy endpoints automatically shows great promise for accelerating clinical trial design moving forwards.

We present the combination of ALMA-IMF and single-dish continuum images from the Mustang-2 Galactic Plane Survey (MGPS90) at 3 millimeters and the Bolocam Galactic Plane Survey (BGPS) at 1 millimeter. Six and ten out of the fiffteen ALMA-IMF fields are combined with MGPS90 and BGPS, respectively. The combination is made via the feathering technique. We used the dendrogram algorithm throughout the combined images, and performed further analysis in the six fields with combination in both bands (G012.80, W43-MM1, W43-MM2, W43-MM3, W51-E, W51-IRS2). In these fields, we calculated spectral index maps and used them to separate regions dominated by dust or free-free emission, and then performed further structural analysis. We report the basic physical parameters of the dust-dominated (column densities, masses) and ionized (emission measures, hydrogen ionization photon rates) structures. We also searched for multi-scale relations in the dust-dominated structures across the analyzed fields, finding that the fraction of mass in dendrogram leaves (which we label as "Leaf Mass Eficiency", LME) as a function of molecular gas column density follows a similar trend: a rapid, exponential-like growth, with maximum values approaching 100% in most cases. The observed behaviour of the LME with gas column is tentatively interpreted as an indicator of large star formation activity within the ALMA-IMF protoclusters. W51-E and G012.80 stand out as cases with comparatively large and reduced potential for further star formation, respectively., Comment: Accepted to The Astrophysical Journal Supplement

We present a catalog of 315 protostellar outflow candidates detected in SiO J=5-4 in the ALMA-IMF Large Program, observed with ~2000 au spatial resolution, 0.339 km/s velocity resolution, and 2-12 mJy/beam (0.18-0.8 K) sensitivity. We find median outflow masses, momenta, and kinetic energies of ~0.3 M$_{\odot}$, 4 M$_{\odot}$ km/s, and 10$^{45}$ erg, respectively. Median outflow lifetimes are 6,000 years, yielding median mass, momentum, and energy rates of $\dot{M}$ = 10$^{-4.4}$ M$_{\odot}$ yr$^{-1}$, $\dot{P}$ = 10$^{-3.2}$ M$_{\odot}$ km/s yr$^{-1}$, and $\dot{E}$ = 1 L$_{\odot}$. We analyze these outflow properties in the aggregate in each field. We find correlations between field-aggregated SiO outflow properties and total mass in cores (~3$-$5$\sigma$), and no correlations above 3$\sigma$ with clump mass, clump luminosity, or clump luminosity-to-mass ratio. We perform a linear regression analysis and find that the correlation between field-aggregated outflow mass and total clump mass - which has been previously described in the literature - may actually be mediated by the relationship between outflow mass and total mass in cores. We also find that the most massive SiO outflow in each field is typically responsible for only 15-30% of the total outflow mass (60% upper limit). Our data agree well with the established mechanical force-bolometric luminosity relationship in the literature, and our data extend this relationship up to L $\geq$ 10$^6$ L$_{\odot}$ and $\dot{P}$ $\geq$ 1 M$_{\odot}$ km/s yr$^{-1}$. Our lack of correlation with clump L/M is inconsistent with models of protocluster formation in which all protostars start forming at the same time., Comment: 46 pages, 14 figures, 10 tables. This publication has an associated Zenodo entry, which can be found here: https://zenodo.org/records/8350595

ALMA-IMF is an Atacama Large Millimeter/submillimeter Array (ALMA) Large Program designed to measure the core mass function (CMF) of 15 protoclusters chosen to span their early evolutionary stages. It further aims to understand their kinematics, chemistry, and the impact of gas inflow, accretion, and dynamics on the CMF. We present here the first release of the ALMA-IMF line data cubes (DR1), produced from the combination of two ALMA 12m-array configurations. The data include 12 spectral windows, with eight at 1.3mm and four at 3mm. The broad spectral coverage of ALMA-IMF (~6.7 GHz bandwidth coverage per field) hosts a wealth of simple atomic, molecular, ionised, and complex organic molecular lines. We describe the line cube calibration done by ALMA and the subsequent calibration and imaging we performed. We discuss our choice of calibration parameters and optimisation of the cleaning parameters, and we demonstrate the utility and necessity of additional processing compared to the ALMA archive pipeline. As a demonstration of the scientific potential of these data, we present a first analysis of the DCN (3-2) line. We find that DCN traces a diversity of morphologies and complex velocity structures, which tend to be more filamentary and widespread in evolved regions and are more compact in the young and intermediate-stage protoclusters. Furthermore, we used the DCN (3-2) emission as a tracer of the gas associated with 595 continuum cores across the 15 protoclusters, providing the first estimates of the core systemic velocities and linewidths within the sample. We find that DCN (3-2) is detected towards a higher percentage of cores in evolved regions than the young and intermediate-stage protoclusters and is likely a more complete tracer of the core population in more evolved protoclusters. The full ALMA 12m-array cubes for the ALMA-IMF Large Program are provided with this DR1 release., Comment: 75 pages (21 main body; 54 appendix), 37 figures. The ALMA-IMF DR1 line release is hosted at https://dataverse.harvard.edu/dataverse/alma-imf

Quantum chemistry is envisioned as an early and disruptive application for quantum computers. Yet, closer scrutiny of the proposed algorithms shows that there are considerable difficulties along the way. Here, we propose two criteria for evaluating two leading quantum approaches for finding the ground state of molecules. The first criterion applies to the variational quantum eigensolver (VQE) algorithm. It sets an upper bound to the level of imprecision/decoherence that can be tolerated in quantum hardware as a function of the targeted precision, the number of gates and the typical energy contribution from states populated by decoherence processes. We find that decoherence is highly detrimental to the accuracy of VQE and performing relevant chemistry calculations would require performances that are expected for fault-tolerant quantum computers, not mere noisy hardware, even with advanced error mitigation techniques. Physically, the sensitivity of VQE to decoherence originates from the fact that, in VQE, the spectrum of the studied molecule has no correlation with the spectrum of the quantum hardware used to perform the computation. The second criterion applies to the quantum phase estimation (QPE) algorithm, which is often presented as the go-to replacement of VQE upon availability of (noiseless) fault-tolerant quantum computers. QPE requires an input state with a large enough overlap with the sought-after ground state. We provide a criterion to estimate quantitatively this overlap based on the energy and the energy variance of said input state. Using input states from a variety of state-of-the-art classical methods, we show that the scaling of this overlap with system size does display the standard orthogonality catastrophe, namely an exponential suppression with system size. This in turns leads to an exponentially reduced QPE success probability., Comment: 14 pages, 5 figures, 1 table

The formation of stellar clusters dictates the pace at which galaxies evolve, and solving the question of their formation will undoubtedly lead to a better understanding of the Universe as a whole. While it is well known that star clusters form within parsec-scale over-densities of interstellar molecular gas called clumps, it is, however, unclear whether these clumps represent the high-density tip of a continuous gaseous flow that gradually leads towards the formation of stars, or a transition within the gas physical properties. Here, we present a unique analysis of a sample of 27 infrared dark clouds embedded within 24 individual molecular clouds that combine a large set of observations, allowing us to compute the mass and velocity dispersion profiles of each, from the scale of tens of parsecs down to the scale of tenths of a parsec. These profiles reveal that the vast majority of the clouds, if not all, are consistent with being self-gravitating on all scales, and that the clumps, on parsec-scale, are often dynamically decoupled from their surrounding molecular clouds, exhibiting steeper density profiles ($\rho\propto r^{-2}$) and flat velocity dispersion profiles ($\sigma\propto r^0$), clearly departing from Larson's relations. These findings suggest that the formation of star clusters correspond to a transition regime within the properties of the self-gravitating molecular gas. We propose that this transition regime is one that corresponds to the gravitational collapse of parsec-scale clumps within otherwise stable molecular clouds., Comment: Accepted by MNRAS, 26 pages, 28 figures (including appendices)

The origin of the stellar initial mass function (IMF) and its relation with the core mass function (CMF) are actively debated issues with important implications in astrophysics. Recent observations in the W43 molecular complex of top-heavy CMFs, with an excess of high-mass cores compared to the canonical mass distribution, raise questions about our understanding of the star formation processes and their evolution in space and time. We aim to compare populations of protostellar and prestellar cores in three regions imaged in the ALMA-IMF Large Program. We created an homogeneous core catalogue in W43, combining a new core extraction in W43-MM1 with the catalogue of W43-MM2&MM3 presented in a previous work. Our detailed search for protostellar outflows enabled us to identify between 23 and 30 protostellar cores out of 127 cores in W43-MM1 and between 42 and 51 protostellar cores out of 205 cores in W43-MM2&MM3. Cores with neither outflows nor hot core emission are classified as prestellar candidates. We found a similar fraction of cores which are protostellar in the two regions, about 35%. This fraction strongly varies in mass, from 15-20% at low mass, between 0.8 and 3$M_{\odot} $ up to about 80% above 16$M_{\odot}$. Protostellar cores are found to be, on average, more massive and smaller in size than prestellar cores. Our analysis also revealed that the high-mass slope of the prestellar CMF in W43, $\alpha=-1.46_{-0.19}^{+0.12}$, is consistent with the Salpeter slope, and thus the top-heavy form measured for the global CMF, $\alpha=-0.96$, is due to the protostellar core population. Our results could be explained by clump-fed models in which cores grow in mass, especially during the protostellar phase, through inflow from their environment. The difference between the slopes of the prestellar and protostellar CMFs moreover implies that high-mass cores grow more in mass than low-mass cores., Comment: 28 pages, 18 figures. Accepted for publication in A&A. Title and appendices updated

Among the most central open questions regarding the initial mass function (IMF) of stars is the impact of environment on the shape of the core mass function (CMF) and thus potentially on the IMF. The ALMA-IMF Large Program aims to investigate the variations in the core distributions with cloud characteristics, as diagnostic observables of the formation process and evolution of clouds. The present study focuses on the W43-MM2&MM3 mini-starburst, whose CMF has recently been found to be top-heavy with respect to the Salpeter slope. W43-MM2&MM3 harbors a rich cluster that contains a statistically significant number of cores, which was previously characterized in Paper III. We applied a multi-scale decomposition technique to the ALMA 1.3 mm and 3 mm continuum images to define six subregions. For each subregion we characterized the high column density probability distribution function, n-PDF, and the shape of the cloud gas using the 1.3 mm image. Using the core catalog, we investigate correlations between the CMF and cloud and core properties. We classify the subregions into different stages of evolution, from quiescent to burst to post-burst, based on the surface number density of cores, number of outflows, and UCHii presence. The high-mass end of the subregion CMFs varies from being close to the Salpeter slope (quiescent) to top-heavy (burst and post-burst). Moreover, the second tail of the n-PDF varies from steep, to flat like observed for the high mass star-forming clouds. We found that subregions with flat second n-PDF tails display top-heavy CMFs. The CMF may evolve from Salpeter to top-heavy throughout the star formation process from the quiescent to the burst phase. This scenario raises the question of if the CMF might revert again to Salpeter as the cloud approaches the end of its star formation stage, a hypothesis that remains to be tested., Comment: Accepted for publication in A&A (december, 5th 2022) after language editing; 25 pages, 14 figures

The origin of outflows and their exact impact on disk evolution and planet formation remain crucial open questions. DG Tau B is a Class I protostar associated with a rotating conical CO outflow and a structured disk. Hence it is an ideal target to study these questions. We aim to characterize the morphology and kinematics of the DG Tau B outflow in order to elucidate its origin and potential impact on the disk. Our analysis is based on Atacama Large Millimeter Array (ALMA) 12CO(2-1) observations of DG Tau B at 20 au angular resolution. We characterize three different types of substructures in this outflow (arches, fingers, and cusps) with apparent acceleration. Wind-driven shell models with a Hubble law fail to explain these substructures. In contrast, both the morphology and kinematics of the conical flow can be explained by a steady conical magnetohydrodynamic (MHD) disk wind with foot-point radii r0= 0.7-3.4 au, a small magnetic level arm parameter lambda < 1.6), and quasi periodic brightness enhancements. These might be caused by the impact of jet bow shocks, source orbital motion caused by a 25 MJ companion at 50 au, or disk density perturbations accreting through the wind launching region. The large CO wind mass flux (four times the accretion rate onto the central star) can also be explained if the MHD disk wind removes most of the angular momentum required for steady disk accretion. Our results provide the strongest evidence so far for the presence of massive MHD disk winds in Class I sources with residual infall, and they suggest that the initial stages of planet formation take place in a highly dynamic environment., Comment: 29 pages

Coupling regular topologies with optimised routing algorithms is key in pushing the performance of interconnection networks of supercomputers.In this paper we present Dmodc, a fast deterministic routing algorithm for Parallel Generalised Fat-Trees (PGFTs) which minimises congestion risk even under massive network degradation caused by equipment failure.Dmodc computes forwarding tables with a closed-form arithmetic formula by relying on a fast preprocessing phase.This allows complete re-routing of networks with tens of thousands of nodes in less than a second.In turn, this greatly helps centralised fabric management react to faults with high-quality routing tables and no impact to running applications in current and future very large-scale HPC clusters., Comment: arXiv admin note: text overlap with arXiv:2211.11817

Coupling regular topologies with optimized routing algorithms is key in pushing the performance of interconnection networks of HPC systems. In this paper we present Dmodc, a fast deterministic routing algorithm for Parallel Generalized Fat-Trees (PGFTs) which minimizes congestion risk even under massive topology degradation caused by equipment failure. It applies a modulo-based computation of forwarding tables among switches closer to the destination, using only knowledge of subtrees for pre-modulo division. Dmodc allows complete rerouting of topologies with tens of thousands of nodes in less than a second, which greatly helps centralized fabric management react to faults with high-quality routing tables and no impact to running applications in current and future very large-scale HPC clusters. We compare Dmodc against routing algorithms available in the InfiniBand control software (OpenSM) first for routing execution time to show feasibility at scale, and then for congestion risk under degradation to demonstrate robustness. The latter comparison is done using static analysis of routing tables under random permutation (RP), shift permutation (SP) and all-to-all (A2A) traffic patterns. Results for Dmodc show A2A and RP congestion risks similar under heavy degradation as the most stable algorithms compared, and near-optimal SP congestion risk up to 1% of random degradation.

The precision matrix that encodes conditional linear dependency relations among a set of variables forms an important object of interest in multivariate analysis. Sparse estimation procedures for precision matrices such as the graphical lasso (Glasso) gained popularity as they facilitate interpretability, thereby separating pairs of variables that are conditionally dependent from those that are independent (given all other variables). Glasso lacks, however, robustness to outliers. To overcome this problem, one typically applies a robust plug-in procedure where the Glasso is computed from a robust covariance estimate instead of the sample covariance, thereby providing protection against outliers. In this paper, we study such estimators theoretically, by deriving and comparing their influence function, sensitivity curves and asymptotic variances.

We develop a density-matrix renormalization group (DMRG) algorithm for the simulation of quantum circuits. This algorithm can be seen as the extension of time-dependent DMRG from the usual situation of hermitian Hamiltonian matrices to quantum circuits defined by unitary matrices. For small circuit depths, the technique is exact and equivalent to other matrix product state (MPS) based techniques. For larger depths, it becomes approximate in exchange for an exponential speed up in computational time. Like an actual quantum computer, the quality of the DMRG results is characterized by a finite fidelity. However, unlike a quantum computer, the fidelity depends strongly on the quantum circuit considered. For the most difficult possible circuit for this technique, the so-called "quantum supremacy" benchmark of Google Inc. , we find that the DMRG algorithm can generate bit strings of the same quality as the seminal Google experiment on a single computing core. For a more structured circuit used for combinatorial optimization (Quantum Approximate Optimization Algorithm or QAOA), we find a drastic improvement of the DMRG results with error rates dropping by a factor of 100 compared with random quantum circuits. Our results suggest that the current bottleneck of quantum computers is their fidelities rather than the number of qubits., Comment: 25 pages, 13 figures. Review section updated

W43-MM1 is a young region, very rich in terms of high-mass star formation. We aim to systematically identify the massive cores which contain a hot core and compare their molecular composition. We used ALMA high-spatial resolution (2500 au) data of W43-MM1 to identify line-rich protostellar cores and make a comparative study of their temperature and molecular composition. The identification of hot cores is based on both the spatial distribution of the complex organic molecules and the contribution of molecular lines relative to the continuum intensity. We rely on the analysis of CH3CN and CH3CCH to estimate the temperatures of the selected cores. Finally, we rescale the spectra of the different hot cores based on their CH3OCHO line intensities to directly compare the detections and line intensities of the other species. W43-MM1 turns out to be a region rich in massive hot cores with at least 1 less massive and 7 massive hot cores. The excitation temperature of CH3CN is of the same order for all of them (120-160 K). There is a factor of up to 30 difference in the intensity of the complex organic molecules (COMs) lines. However the molecular emission of the hot cores appears to be the same within a factor 2-3. This points towards both a similar chemical composition and excitation of most of the COMs over these massive cores, which span about an order of magnitude in core mass. In contrast, CH3CCH emission is found to preferentially trace more the envelope, with a temperature ranging from 50 K to 90 K. Core 1, the most massive hot core of W43-MM1, shows a richer line spectrum than the other cores. In core 2, the emission of O-bearing molecules does not peak at the dust continuum core center; the blue and red shifted emission correspond to the outflow lobes, suggesting a formation via the sublimation of the ice mantles through shocks or UV irradiation on the walls of the cavity., Comment: 19 pages, 17 figures. Accepted for publication in A&A

The k-parent and infinite-parent spatial Lambda-Fleming Viot processes (or SLFV), introduced in Louvet (2023), form a family of stochastic models for spatially expanding populations. These processes are akin to a continuous-space version of the classical Eden growth model (but with local backtracking of the occupied area allowed when k is finite), while being associated to a dual process encoding ancestry. In this article, we focus on the growth properties of the area occupied by individuals of type 1 (type 0 encoding units of empty space). To do so, we first define the quantities that we shall use to quantify the speed of growth of the occupied area. Using the associated dual process and a comparison with a first-passage percolation problem, we show that the growth of the occupied region in the infinite-parent SLFV is linear in time. Because of the possibility of local backtracking of the occupied area, the result we obtain for the k-parent SLFV is slightly weaker. It gives an upper bound on the probability that a given location is occupied at time t, which also shows that growth in the k-parent SLFV is linear in time. We use numerical simulations to approximate the growth speed for the infinite-parent SLFV, and we observe that the actual speed may be higher than the speed expected from simple first-moment calculations due to the characteristic front dynamics., Comment: 40 pages, 7 figures

The ALMA-IMF Large Program observed the W43-MM2-MM3 ridge, whose 1.3mm and 3mm ALMA 12m array continuum images reach a 2500au spatial resolution. We used both the best-sensitivity and the line-free ALMA-IMF images, reduced the noise with the multi-resolution segmentation technique MnGSeg, and derived the most complete and most robust core catalog possible. Using two different extraction software packages, getsf and GExt2D, we identified 200 compact sources, whose 100 common sources have on average fluxes consistent to within 30%. We filtered sources with non-negligible free-free contamination and corrected fluxes from line contamination, resulting in a W43-MM2-MM3 catalog of 205 getsf cores. With a median deconvolved FWHM size of 3400au, core masses range from 0.1Msun to 70Msun and the getsf catalog is 90% complete down to 0.8Msun. The high-mass end of the core mass function (CMF) of W43-MM2-MM3 is top-heavy compared to the canonical IMF. Fitting the cumulative CMF with a single power law of the form N(>logM)\propto M^a, we measured a=-0.95\pm0.04, compared to the canonical a=-1.35 Salpeter IMF slope. The slope of the CMF is robust with respect to map processing, extraction software package, and reasonable variations in the assumptions taken to estimate core masses. We explore several assumptions on how cores transfer their mass to stars and sub-fragment to predict the IMF resulting from the W43-MM2-MM3 CMF. In stark contrast to the commonly accepted paradigm, our result argues against the universality of the CMF shape. More robust functions of the star-formation efficiency and core sub-fragmentation are required to better predict the resulting IMF, here suggested to remain top-heavy at the end of the star-formation phase. If confirmed, the IMFs emerging from starburst events could inherit their top-heavy shape from their parental CMFs, challenging the IMF universality., Comment: 28 pages, 16 figures, 6 tables, A&A accepted on 02/08/22, revised following the language referee report

We present the first data release of the ALMA-IMF Large Program, which covers the 12m-array continuum calibration and imaging. The ALMA-IMF Large Program is a survey of fifteen dense molecular cloud regions spanning a range of evolutionary stages that aims to measure the core mass function (CMF). We describe the data acquisition and calibration done by the Atacama Large Millimeter/submillimeter Array (ALMA) observatory and the subsequent calibration and imaging we performed. The image products are combinations of multiple 12m array configurations created from a selection of the observed bandwidth using multi-term, multi-frequency synthesis imaging and deconvolution. The data products are self-calibrated and exhibit substantial noise improvements over the images produced from the delivered data. We compare different choices of continuum selection, calibration parameters, and image weighting parameters, demonstrating the utility and necessity of our additional processing work. Two variants of continuum selection are used and will be distributed: the "best-sensitivity" data, which include the full bandwidth, including bright emission lines that contaminate the continuum, and "cleanest", which select portions of the spectrum that are unaffected by line emission. We present a preliminary analysis of the spectral indices of the continuum data, showing that the ALMA products are able to clearly distinguish free-free emission from dust emission, and that in some cases we are able to identify optically thick emission sources. The data products are made public with this release., Comment: Data released on Zenodo at https://zenodo.org/record/5702966. Accepted for publication in A&A

The ALMA-IMF Large Program imaged a total noncontiguous area of 53pc2, covering 15 extreme, nearby protoclusters of the Milky Way. They were selected to span relevant early protocluster evolutionary stages. Our 1.3mm and 3mm observations provide continuum images that are homogeneously sensitive to point-like cores with masses of 0.2 and 0.6Msun, respectively, with a matched spatial resolution of 2000au. We also detect lines that probe the protocluster structure, kinematics, chemistry, and feedback over scales from clouds to filaments to cores. We classify ALMA-IMF protoclusters as Young, Intermediate, or Evolved based on the amount of dense gas in the cloud that has potentially been impacted by HII regions. The ALMA-IMF catalog contains 700 cores that span a mass range of 0.15-250Msun at a typical size of 2100au. We show that this core sample has no significant distance bias and can be used to build core mass functions at similar physical scales. Significant gas motions, which we highlight here in the G353.41 region, are traced down to core scales and can be used to look for inflowing gas streamers and to quantify the impact of the possible associated core mass growth on the shape of the CMF with time. Our first analysis does not reveal any significant evolution of the matter concentration from clouds to cores or from the youngest to more evolved protoclusters, indicating that cloud dynamical evolution and stellar feedback have for the moment only had a slight effect on the structure of high-density gas in our sample. Furthermore, the first-look analysis of the line richness toward bright cores indicates that the survey encompasses several tens of hot cores, of which we highlight the most massive in the G351.77 cloud. Their homogeneous characterization can be used to constrain the emerging molecular complexity in protostars of high to intermediate masses., Comment: 27 pages, 9 figures, accepted for publication by A&A