Search

Recently, there has been a growing interest in reducing waste to promote environmental sustainability, with particular focus on agricultural by-products, especially fruits and vegetables. Potato, a widely used crop across various industries, generates a significant amount of peel waste. This study aims to valorize potato peels using water bath extraction (WBE) and infrared-assisted extraction (IRAE), both with distilled water as the solvent, followed by assessments of antioxidant, antibacterial, and anti-sprouting activities. Optimization using response surface methodology identified optimal extraction conditions for WBE (90 °C for 70 min) and IRAE (80 °C for 10 min), with both methods yielding 3.5 mg GAE/g DM in polyphenol content. IRAE demonstrated superior energy efficiency and enhanced antioxidant activity. The extracts exhibited antibacterial properties against both Gram-positive (Listeria monocytogenes) and Gram-negative bacteria (Proteus sp. and Salmonella sp.), with inhibition zones ranging from 10 to 14 mm. Furthermore, the potato peels extract showed significant anti-sprouting effects at room temperature, reducing both the number and size of sprouts compared with the control. HPLC analysis showed the presence of different phenolic compounds such as rutin, catechin, caffeic acid, protocatechuic acid, chlorogenic acid, p-coumaric acid, and gallic acid in one or both extracts. These findings suggest that potato peels extract holds potential for applications in the food industry as a natural preservative due to its antioxidant properties, as well as a sprout suppressant. The antibacterial activity of the extracts suggests their potential as a natural preservative as well, offering protection against both Gram-positive and Gram-negative bacteria that may be present in food. [ABSTRACT FROM AUTHOR]

Cumin seeds are frequently utilized in herbal infusions and as flavoring agents in home cuisine. Nevertheless, studies have demonstrated that spices are frequently contaminated with pathogenic bacteria, including bacterial spores. The aim of this study was to assess the effectiveness of a new decontamination method called "Intensification of Vaporization by Decompression to the Vacuum" (IVDV) on intentionally contaminated Cuminum cyminum seeds. The study also examined the impact of this treatment on the color and oil profile of the treated samples. The untreated samples were inoculated with Escherichia coli (ATCC 25922) and Salmonella Typhimurium (ATCC 14028) and then subjected to IVDV treatment. Response surface methodology was employed to obtain safe, high-quality cumin seeds presenting a balance between microbial load, color, and oil profile. The optimal IVDV conditions were achieved at a pressure of 3.5 bar and a time of 133.45 s, resulting in typical 4 log reductions observed with 99.99% of Escherichia coli and Salmonella Typhimurium inactivation. The treated spices presented a mild color modification compared to the untreated ones, manifested by a darker shade (decreased L* value), reduced greenness (increased a* value), and heightened yellowness (increased b* value). The GC-MS analysis detected the existence of seven compounds in the treated cumin, with cuminaldehyde being the primary compound (83.79%). Furthermore, the use of IVDV treatment resulted in an increase in the total content of essential oils in some samples, whereby six monoterpenes were identified in the untreated sample compared to seven monoterpenes in IVDV-treated samples. This innovative technology demonstrated high efficacy in decontaminating C. cyminum seeds, improving the extractability of the essential oils while only slightly affecting the color. [ABSTRACT FROM AUTHOR]

2-phenylethanol (2-PE) is a valuable aromatic alcohol with diverse applications in cosmetics, food, beverages, and pharmaceutical industries. Currently, 2-PE is produced either through chemical synthesis or by extraction from plant materials. However, both conventional production methods have their own limitations. Therefore, there is a need for more eco-friendly and cost-effective approaches to produce natural 2-PE. Biotechnological routes, particularly microbial fermentations, hold promise for natural 2-PE production, especially when using low-cost substrates. In this study, 2-PE was produced by de novo synthesis via the shikimate pathway, using the yeast Yarrowia lipolytica in a medium composed of sugar beet molasses (SBM) and yeast extract (YE) as carbon and nitrogen sources, respectively. A genetically engineered strain was generated, in which the SUC2 gene was transformed, expressing the invertase enzyme, enabling Y. lipolytica to efficiently utilize SBM as a cost-effective substrate. A central composite design allowed for the optimization of the concentrations of the carbon and nitrogen sources, resulting in approximately 0.71 g(2-PE)/L(culture medium). The results obtained highlight the potential of utilizing SBM as a low-cost substrate for 2-PE production, advancing biotechnological approaches in fragrance synthesis. [ABSTRACT FROM AUTHOR]

Poultry wastes are rich in organic matter, allowing their use as substrates for biogas production by anaerobic digestion (AD). The major difficulty in the anaerobic digestion of this protein-rich waste is ammonia inhibition. Different results of biochemical methane potential (BMP) were obtained after the mesophilic anaerobic digestion of different avian waste in batch mode. It was shown that using two different inoculum (Liger and Saint-Brieuc) sources and different substrate-to-inoculum (S/I) ratios does not have a significant effect on the biochemical methane potential of organic laying hen droppings (OLHD); an average of 0.272 Nm3 CH4·kg−1·VS was obtained with both inocula. Otherwise, it affects the hydrolysis constant KH, and it decreases when the substrate-to-inoculum ratio increases. Furthermore, Liger is the most suitable inoculum for our substrate because it shows stability during the process even with different organic loads. Comparing the biochemical methane potential of multiple avian wastes such as organic laying hen droppings and different slaughterhouse waste highlights the importance of slaughterhouse waste in the anaerobic digestion process because of the high methane yield observed especially with the viscera (0.779 Nm3 CH4·kg−1 VS, SD = 0.027 Nm3 CH4·kg−1 VS). Moreover, methane production was affected by increasing the ammonia concentrations; when [N-NH3] > 9.8 g·N-NH3·L−1, the biochemical methane potential decreases and the lag phase increases (λ > 30 days); a total inhibition of the process was observed when ammonia concentration is above 21.8 g·L−1. [ABSTRACT FROM AUTHOR]

Highly valued for their nutritional benefits, sprouts are characterized by high water content, which promotes microbial proliferation, potentially leading to toxicity and a reduced shelf life. To address this challenge, the present study explores the application of a novel drying–texturizing approach, named IVDV (Intensification of Vaporization by Decompression to the Vacuum), to sprouts. This technique would enable faster drying of the sprouts and better preservation of their nutritional content, compared to traditional hot-air drying. Using Response Surface Methodology, optimal IVDV parameters (saturated steam pressure P, processing time t, and water content W) for wheat sprouts were defined, with a focus on preserving vitamins, proteins, and lipids, and optimizing the expansion ratio. This optimization process identified optimal experimental conditions at 5.5 bars, a duration of 15 s, and 8.8% d.b. water content. Under these conditions, the use of IVDV endowed the expanded sprouts with a crunchier and more friable texture. In addition, it significantly improved the preservation of vitamins B6 and E by 412% and 42%, respectively, compared to traditional mild hot-air drying, without significantly affecting vitamin B2, proteins, and lipids. When combined with conventional hot-air drying, IVDV not only enhanced the preservation of the sprouts' nutritional content but also reduced drying time and energy consumption. This marks a significant advancement in sprouts preservation techniques, paving the way for novel potential applications. [ABSTRACT FROM AUTHOR]

(1) Background: Cumin seeds, extracted from the plant Cuminum cyminum, are abundant in phenolic compounds and have been extensively researched for their chemical makeup and biological effects. The objective of this research is to enhance the water extraction of polyphenols through the water bath (WB) technique and to evaluate the antiradical, antibacterial, and anticancer effects of the extract. (2) Methods: Response Surface Methodology was used to find the best parameters to extract polyphenols. Three experimental parameters, time, temperature, and solid-liquid ratio, were tested. The disc diffusion method has been used to determine the antimicrobial activities against Salmonella Typhimurium, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, and Candida albicans. The antiradical activity was performed using the DPPH method, while total phenolic content was performed using Folin–Ciocalteu. High-Performance Liquid Chromatography (HPLC) was conducted to analyze the phytochemical profile of WB extracts. The anticancer activity of the lyophilized extract was assessed against three cancer cell lines (colon (HT29), lung (A549), and breast (MCF7) cancer cell lines).; (3) Results: The optimal conditions for water extraction were 130 min at 72 °C. The total phenolic compounds yield (14.7 mg GAE/g DM) and antioxidant activity (0.52 mg trolox eq./mL) were obtained using a 1:40 solid–liquid ratio. The primary polyphenols identified were the flavonoids rutin (0.1 ppm) and ellagic acid (3.78 ppm). The extract had no antibacterial or antifungal activities against the microorganisms tested. The extract showed anticancer activity of about 98% against MCF7 (breast cancer cell line), about 81% against HT29 (colon cancer cell line), and 85% against A549 (lung cancer cell line) at high doses. (4) Conclusions: Extraction time and a high solid–liquid ratio had a positive impact on polyphenol recovery and in maintaining their quantity and quality. Furthermore, the optimal aqueous extract exhibited strong antiradical activity reflected by the inhibition of free radicals in addition to a significant specificity against the tested cancer cell lines. [ABSTRACT FROM AUTHOR]

Colorimetric whole-cell biosensors are natural or genetically engineered microorganisms utilized to detect target molecules and ions as indicators of pollutants and biological activity in the environment. Upon detection, within specific concentration ranges which vary depending on the microorganism and its genetic circuitry among other factors, these sensors produce pigments which can be detected with the human eye past certain thresholds and quantified using simple analytical techniques, namely spectrophotometry. These sensors, which can be rendered portable through lyophilization and other methods, provide valuable and reliable substitutes of more demanding analytical ex situ techniques. The insights gained from this review can highlight technological progress in the field and contribute to the identification of potential opportunities afforded by these advancements. [ABSTRACT FROM AUTHOR]